work sanctioned under business plan 2024-25 in area under electricity urban distribution division-ii, gorakhpur-2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 11 kv xlpe cable 3x185 sq mm 4 cable jointing kit 11 kv 3x185 sq mm o / d 5 laying and dressing of under ground 11 kv 3x185 sq mm xlpe cable ( wherever required ) by horizontal drilling methodas per resspo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 6 erection of 11 kv xlpe cable 3x185 mm² jointing kit with complete work oading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 9 63 kva transformer 10 100 kva transformer 11 250 kva transformer 12 lt xlpe al. 3.5x70 sq mm 13 lt xlpe al. 3.5x150 sq mm 14 supply offollowing material / fitting complete in all respect :- 15 copper z clamp 16 almunium lugs of different sizes as per cable requirement 17 fabrication, erection, commissioning & testing of 63 / 100 / 250 kva t / f on double pole / plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 18 dismentling & carriage of old transformer from work site to store centre 20 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 21 250 kva transformer 22 11 kv xlpe cable 3x70 sq mm 23 11 kv c / j kit 3x70 sq mm 24 pcc 8.5 m long 25 st pole 11 m long 26 ms top channel ( 125x65x2240 ) mm 27 ms angle ( dropper ) 100x50x2028 mm 28 acsr weasel conductor 29 11 kv pin insulator with pin 30 11 kv disc insulaor with fiitings 31 lt ab cable ( 3x120+1x95+1x16 ) sq mm 32 11 kv fuse set 33 11 kv tpmo set 34 ss base angle 35 11 kv v cross arm 36 11 kv t-off channel 37 stay complete ( stay rod 16x1800 mm, stay wire 5 kg, stay clamp, bolt & nuts ) 38 earthing complete 39 lt cable 1x35 sq mm 40 lt cable 1x240 sq mm 41 ms channel 42 supply offollowing material / fitting complete in all respect :- 43 lt three phase distribution box 44 clamp for lt three phase db box 45 suspension clamp with i hook ( insulated ) 46 dead end clamp with i hook ( insulated ) 47 piercing connector ( insulated ) 48 holding clamp for top, dropper channel fuse set etc with nuts & bolts 49 copper z clamp 50 nuts & bolts of different sizes 51 al lugs 52 g.i pipe dia 6 inch 53 lt clamp 54 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 55 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 56 fabrication, erection, commissioning & testing of250 kva t / f on plinth / double pole with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 57 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 58 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 59 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 60 earthing of pole by ms earthing rod & 6 swg earthing wire as per respo norms. 61 laying and dressing of under ground 11 kv 3x70 sq mm xlpe cable by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 62 erection of 11 kv xlpe cable 3x70 mm² jointing kit with complete work 63 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 64 laying, stringing, sagging, binding and jumpering of acsr dog / weasel conductor for lt / ht line with fixing of lt clamps / other clamps, shackle insulator and nuts&bolts off size as per required. 65 erection oftpmo 66 erection offuse set 67 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 68 laying, stringing, sagging, binding and jumpering of abc ( 3x120+1x95+1x16 ) sq.mm. cable of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. al. cable for giving connection to street light and nuts&bolts off size by the contractor.