the work sanctioned under nagar nigam system strengthening scheme in area under electricity urban distribution division-i, gorakhpur-2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 3x185 mm2 xlpe 11 kv 4 cable jointing kit 11 kv xlpe 3x185 sq mm 5 cable jointing kit 11 kv xlpe 3x185 sq mm straight through 6 s.t. pole 11 mtr. long 7 11 kv dropper channel 8 11 kv top channel 9 11 kv pin insulator 10 11 kv pin with net 11 11 kv cross arm 12 acsr dog conductor 13 11 kv disc insulator with fitting 14 stay complete 15 earthing complete 16 11 kv vcb o / g ctr 200 / 100 / 5a, 350 mva 17 supply offollowing material / fitting complete in all respect :- 18 hdpe pipe dia 6 inch 19 holding clamps for top, dropper, t-off etc 20 nuts & bolts off size 21 g.i pipe dia 6 inch 22 f-bracket 23 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 24 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 25 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 26 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 27 laying of hdpe pipe 6 inch diameter for laying of 11 kv 3x185 sq mm xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984 / 1995 and shall have wall thickness of 6.20 to 7.10 mm ( hdpe pipe 6 inch dia with elbow and socket for 11 kv cable will be supplied by contractor ) 28 laying and dressing of under ground 11 kv 3x185 sq mm xlpe cable into hdpe pipe ( wherever required ) by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 29 laying and dressing of under ground 11 kv 3x185 sq mm xlpe cable into trenchas per resspo norms. 30 erection of 11 kv xlpe cable 3x185 mm² jointing kit with complete work 31 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 32 fabrication, erection, commissioning & testing of11 kv vcb o / g ctr 200 / 100 / 5a, 350 mva 33 earthing of11 kv vcb o / g ctr 200 / 100 / 5a, 350 mva 35 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 36 11 kv xlpe cable 3x185 sq mm 37 cable jointing kit 3x185 sq mm o / d 38 stp 9 mtr long 39 11 kv top channel 40 11 kv dropper angle 41 11 kv pin insulator 42 11 kv pin 43 earthing complete 44 supply offollowing material / fitting complete in all respect :- 45 hdpe pipe dia 6 inch 46 nuts & bolts 47 g.i pipe dia 6 inch 48 red oxide paint 49 aluminium paint 50 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 51 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 52 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 53 laying of hdpe pipe 6 inch diameter for laying of 11 kv 3x185 sq mm xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984 / 1995 and shall have wall thickness of 6.20 to 7.10 mm ( hdpe pipe 6 inch dia with elbow and socket for 11 kv cable will be supplied by contractor ) 54 laying and dressing of under ground 11 kv 3x185 sq mm xlpe cable into hdpe pipe ( wherever required ) by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 55 erection of 11 kv xlpe cable 3x185 mm² jointing kit with complete work 56 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 57 dismentling & carriage of old existing o / h line from work site to store centre 59 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 60 lt ab cable ( 3x150+1x120+1x16 ) sq mm 61 lt three phase distribution box 62 lt cable 1x35 sq mm 63 supply offollowing material / fitting complete in all respect :- 64 clamp for lt three phase db box with nut & bolts 65 suspension clamp with i hook ( insulated ) 66 dead end clamp with i hook ( insulated ) 67 piercing connector ( insulated ) 68 laying, stringing, sagging, binding and jumpering of abc ( 3x150+1x120+1x16 ) sq.mm. cable of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. al. cable for giving connection to street light and nuts&bolts off size by the contractor. 69 dismentling of old existing a.b. cable 70 carriage of old existing conductor from work site to store centre 71 disconnection & reconnection of consumer service cables 73 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 74 lt ab cable ( 3x120+1x95+1x16 ) sq mm 75 st pole 9 mtr long 76 lt three phase distribution box 77 lt cable 1x35 sq mm 78 supply offollowing material / fitting complete in all respect :- 79 lt clamps with nuts & bolts 80 clamp for lt three phase db box with nut & bolts 81 suspension clamp with i hook ( insulated ) 82 dead end clamp with i hook ( insulated ) 83 piercing connector ( insulated ) 84 laying, stringing, sagging, binding and jumpering of abc ( 3x120+1x95+1x16 ) sq.mm. cable of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. al. cable for giving connection to street light and nuts&bolts off size by the contractor. 85 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 86 disconnection & reconnection of consumer service cables 88 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 89 st pole 9 mtr long 90 earthing complete 91 supply offollowing material / fitting complete in all respect :- 92 lt clamps with nuts & bolts 93 shackle insulator 100x115 mm 94 red oxide paint 95 aluminium paint 96 waterproof danger board sticker 97 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with sticking of waterproof danger board sticker, fixing / refixing of necessary clamps & accessories as per required alongwith resagging of lt line ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 98 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 99 dismentling & carriage of old existing pole from work site to store centre 100 disconnection & reconnection of consumer service cables 102 chemical earthing of distribution transformers ( body+neutral in one complete job ) 104 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 105 63 kva transformer 106 100 kva transformer 107 250 kva transformer 108 400 kva transformer 109 lt xlpe al. 3.5x70 sq mm 110 lt xlpe al. 3.5x150 / 120 sq mm 111 lt xlpe al. 1x240 sq mm 112 lt cable 1x400 sq mm 113 supply offollowing material / fitting complete in all respect :- 114 copper z clamp 115 almunium lugs of different sizes as per cable requirement 116 fabrication, errection, commissioning & testing of63 / 100 / 250 / 400 kva t / f on double pole / plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 117 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 118 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 119 dismantling & carriage of old transformer from work site to store centre 121 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 122 250 kva transformer 123 11 kv xlpe cable 3x70 sq mm 124 11 kv c / j kit 3x70 sq mm 125 st pole 09 mtr long 126 st pole 11 mtr long 127 ms top channel ( 125x65x2240 ) mm 128 ms angle ( dropper ) 100x50x2028 mm 129 acsr weasel conductor 130 acsr dog conductor 131 11 kv pin insulator with pin 132 11 kv disc insulaor with fiitings 133 lt ab cable ( 3x120+1x95+1x16 ) sq mm 134 lt three phase distribution box 135 lt cable 1x35 sq mm 136 11 kv fuse set 137 11 kv tpmo set 138 11 kv v cross arm 139 11 kv t-off channel 140 stay complete ( stay rod 16x1800 mm, stay wire 5 kg, stay clamp, bolt & nuts ) 141 earthing complete 142 lt cable 1x240 sq mm 143 supply offollowing material / fitting complete in all respect :- 144 clamp for lt three phase db box with nut & bolts 145 suspension clamp with i hook ( insulated ) 146 dead end clamp with i hook ( insulated ) 147 piercing connector ( insulated ) 148 shackle insulator 149 lt clamps 150 f bracket 151 holding clamp for top, dropper channel fuse set etc with nuts & bolts 152 copper z calmp 153 nuts & bolts of different sizes 154 al lugs 155 g.i pipe dia 6 inch 156 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 157 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 158 fabrication, errection, commissioning & testing of250 kva t / f on plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 159 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 160 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 161 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 162 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 163 chemical earthing of distribution transformers ( body+neutral in one complete job ) 164 laying and dressing of under ground 11 kv 3x70 sq mm xlpe cable by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 165 erection of 11 kv xlpe cable 3x70 mm² jointing kit with complete work 166 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 167 laying, stringing, sagging, binding and jumpering of lt abc ( 3x120+1x95+1x16 ) sq.mm. cable of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. al. cable for giving connection to street light and nuts&bolts off size by the contractor. 168 laying, stringing, sagging, binding and jumpering of acsr dog / weasel conductor for lt / ht line with fixing of lt clamps / other clamps, shackle insulator and nuts&bolts off size as per required. 169 erection oftpmo & fuse set 170 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 172 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 173 400 kva transformer 174 11 kv xlpe cable 3x70 sq mm 175 11 kv c / j kit 3x70 sq mm 176 st pole 09 mtr long 177 st pole 11 mtr long 178 ms top channel ( 125x65x2240 ) mm 179 ms angle ( dropper ) 100x50x2028 mm 180 acsr weasel conductor 181 11 kv pin insulator with pin 182 11 kv disc insulaor with fiitings 183 11 kv fuse set 184 11 kv tpmo set 185 11 kv v cross arm 186 11 kv t-off channel 187 stay complete ( stay rod 16x1800 mm, stay wire 5 kg, stay clamp, bolt & nuts ) 188 earthing complete 189 lt cable 1x400 sq mm 190 supply offollowing material / fitting complete in all respect :- 191 shackle insulator 192 lt clamps 193 f bracket 194 holding clamp for top, dropper channel fuse set etc with nuts & bolts 195 copper z calmp 196 nuts & bolts of different sizes 197 al lugs 198 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 199 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 200 fabrication, errection, commissioning & testing of400 kva t / f on plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 201 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 202 laying and dressing of under ground 11 kv 3x70 sq mm xlpe cable by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 203 erection of 11 kv xlpe cable 3x70 mm² jointing kit with complete work 204 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 205 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 206 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 207 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 208 chemical earthing of distribution transformers ( body+neutral in one complete job ) 209 laying, stringing, sagging, binding and jumpering of acsr dog / weasel conductor for lt / ht line with fixing of lt clamps / other clamps, shackle insulator and nuts&bolts off size as per required. 210 erection oftpmo & fuse set 211 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 213 supply of 11kv, 630, 21ka ring main unit, 3 way, outdoor type, 2lbs+1vcb, manual operated, non extensible , sf6 gas insulated