work sanctioned under nagar nigam system strengthening scheme in area under electricity urban distribution division-ii, gorakhpur-2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 3x185 mm2 xlpe 11 kv 4 cable jointing kit 11 kv xlpe 3x185 sq mm 5 cable jointing kit 11 kv xlpe 3x185 sq mm straight through 6 s.t. pole 11 mtr. long 7 11 kv dropper channel 8 11 kv top channel 9 11 kv pin insulator 10 11 kv pin with net 11 11 kv cross arm 12 acsr dog conductor 13 11 kv disc insulator with fitting 14 11 kv t-off channel 15 stay complete 16 earthing complete 17 11 kv vcb o / g ctr 200 / 100 / 5a, 350 mva 18 supply offollowing material / fitting complete in all respect :- 19 11 kv feeder pillar box 20 hdpe pipe dia 6 inch 21 holding clamps for top, dropper, t-off etc 22 nuts & bolts off size 23 g.i pipe dia 6 inch 24 f-bracket 25 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 26 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 27 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 28 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 29 laying of hdpe pipe 6 inch diameter for laying of 11 kv 3x185 sq mm xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984 / 1995 and shall have wall thickness of 6.20 to 7.10 mm ( hdpe pipe 6 inch dia with elbow and socket for 11 kv cable will be supplied by contractor ) 30 laying and dressing of under ground 11 kv 3x185 sq mm xlpe cable into hdpe pipe ( wherever required ) by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 31 erection of 11 kv xlpe cable 3x185 mm² jointing kit with complete work 32 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 33 fabrication, erection, commissioning & testing of11 kv vcb o / g ctr 200 / 100 / 5a, 350 mva 34 earthing of11 kv vcb o / g ctr 200 / 100 / 5a, 350 mva 35 fabrication & erection of11 kv feeder pillar box including making plinth 37 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 38 lt ab cable ( 3x150+1x120+1x16 ) sq mm 39 lt ab cable ( 3x120+1x95+1x16 ) sq mm 40 lt three phase distribution box 41 lt cable 1x35 sq mm 42 supply offollowing material / fitting complete in all respect :- 43 clamp for lt three phase db box with nuts & bolts 44 suspension clamp with i hook ( insulated ) 45 dead end clamp with i hook ( insulated ) 46 piercing connector ( insulated ) 47 laying, stringing, sagging, binding and jumpering of abc ( 3x150+1x120+1x16 ) sq.mm. / ( 3x120+1x95+1x16 ) sq mm cable of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. al. cable for giving connection to street light and nuts&bolts off size by the contractor. 48 dismentling of old existing a.b. cable 49 carriage of old existing a.b. cable from work site to store centre 50 disconnection & reconnection of consumer service cables 52 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 53 lt ab cable ( 3x120+1x95+1x16 ) sq mm 54 st pole 9 mtr long 55 lt three phase distribution box 56 lt cable 1x35 sq mm 57 supply offollowing material / fitting complete in all respect :- 58 lt clamps with nuts & bolts 59 clamp for lt three phase db box with nuts & bolts 60 suspension clamp with i hook ( insulated ) 61 dead end clamp with i hook ( insulated ) 62 piercing connector ( insulated ) 63 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 64 laying, stringing, sagging, binding and jumpering of abc ( 3x120+1x95+1x16 ) sq.mm. cable of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. al. cable for giving connection to street light and nuts&bolts off size by the contractor. 65 disconnection & reconnection of consumer service cables 67 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 68 st pole 9 mtr long 69 earthing complete 70 supply offollowing material / fitting complete in all respect :- 71 lt clamps with nuts & bolts 72 shackle insulator 100x115 mm 73 red oxide paint 74 aluminium paint 75 waterproof danger board sticker 76 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with sticking of waterproof danger board sticker, fixing / refixing of necessary clamps & accessories as per required alongwith resagging of lt line ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 77 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 78 dismentling & carriage of old existing pole from work site to store centre 79 disconnection & reconnection of consumer service cables 81 chemical earthing of distribution transformers ( body+neutral in one complete job ) 83 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 84 63 kva transformer 85 250 kva transformer 86 400 kva transformer 87 lt xlpe al. 3.5x70 sq mm 88 lt xlpe al. 1x240 sq mm 89 lt cable 1x400 sq mm 90 supply offollowing material / fitting complete in all respect :- 91 copper z clamp 92 almunium lugs of different sizes as per cable requirement 93 fabrication, erection, commissioning & testing of63 / 250 / 400 kva t / f on double pole / plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 94 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 95 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 96 dismentling & carriage of old transformer from work site to store centre 98 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 99 400 kva transformer 100 250 kva transformer 101 11 kv xlpe cable 3x70 sq mm 102 11 kv c / j kit 3x70 sq mm 103 st pole 09 mtr long 104 st pole 11 mtr long 105 ms top channel ( 125x65x2240 ) mm 106 ms angle ( dropper ) 100x50x2028 mm 107 acsr weasel conductor 108 11 kv pin insulator with pin 109 11 kv disc insulaor with fiitings 110 11 kv fuse set 111 11 kv tpmo set 112 11 kv v cross arm 113 11 kv t-off channel 114 stay complete ( stay rod 16x1800 mm, stay wire 5 kg, stay clamp, bolt & nuts ) 115 earthing complete 116 lt cable 1x240 sq mm 117 lt cable 1x400 sq mm 118 supply offollowing material / fitting complete in all respect :- 119 shackle insulator 120 lt clamps 121 f bracket 122 holding clamp for top, dropper channel fuse set etc with nuts & bolts 123 copper z calmp 124 nuts & bolts of different sizes 125 al lugs 126 g.i pipe dia 6 inch 127 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 128 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories as per required ( if required ) . all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 129 fabrication, erection, commissioning & testing of250 / 400 kva t / f on plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 130 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 131 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 132 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 133 earthing of stp pole by ms earthing rod & 6 swg earthing wire as per respo norms. 134 chemical earthing of distribution transformers ( body+neutral in one complete job ) 135 laying and dressing of under ground 11 kv 3x70 sq mm xlpe cable by horizontal drilling methodas per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 136 erection of 11 kv xlpe cable 3x70 mm² jointing kit with complete work 137 making loop & hoisting of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 138 laying, stringing, sagging, binding and jumpering of acsr dog / weasel conductor for lt / ht line with fixing of lt clamps / other clamps, shackle insulator and nuts&bolts off size as per required. 139 erection oftpmo & fuse set 140 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 142 supply of 11kv, 630, 21ka ring main unit, 3 way, outdoor type, 2lbs+1vcb, manual operated, non extensible , sf6 gas insulated