the work against sanctioned package no. 41 / 2020-21 & 42 / 2020-21 ( under business plan scheme ) under electricity urban distribution division-iii / iv, gora-2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 250 kva transformer 4 st pole 11 mtr long 5 st pole 9 mtr long 6 pcc 8.5 mtr long 7 acsr dog conductor 8 acsr weasel conductor 9 earthing complete 10 cross arm 11 lt xlpe cable ai 1x240 sq.mm. 12 stay complete 13 11 kv dropper channel 14 11 kv top channel 15 11 kv t-off 16 11 kv pin insulator with pin 17 11 kv disc insulator with fitting 18 supply of following material / fitting complete in all respect- 19 aluminium lugs 20 copper z clamps 21 holding clamps 22 lt shackle insulator 23 nuts & bolts of different size 24 the excavation of 2 nos. foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor. ngrouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) . n in case of st pole making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. nall work will be done as per respo norms & relevent is specification. 25 the excavation of foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of pole with fixing of necessary clamps & accessories as per required. all required materials such as holding clamp / stp / lt clamp, f-bracket, lt shacle insulator, nuts & bolts off size etc will be provided by the contractor. ngrouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) . nin case of st pole making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. nall work will be done as per respo norms & relevent is specification. 26 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 27 painting of pole with aluminium paint & red oxide paint provided by contractor 28 earthing of pole by ms earthing rod & 6 swg earthing wire as per respo norms. 29 laying, stringing, sagging, binding and jumpering of acsr weasel / dog conductor for lt / ht line with fixing of lt clamps / other clamps, shackle insulator and nuts&bolts off size as per required. 30 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely and plastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 31 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 32 fabrication, errection, commissioning & testing of 250 kva t / f on plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 33 chemical earthing of transformer ( body+neutral ) as per is code 3043 - 1987 specification 34