purchase of furnitures purchase of furnitures for civil engineering department and principals office , furnitures , steel cupboard with door (almirah)steel cup board of size 78’’ x 36’’ x 18’’ (h x l x b) made out of body 20 gauge cr sheet with door 18 gauge cr sheet, with 5 compartments with locking arrangements and one coat redoxide, two coat of quality enamel paint finish. , steel solid angle racking systemtype : open typedimensions: 78’’ x 36’’ x 18’’ (h x l x b)number of shelves: 5 angle posts: rolled steel angle posts shall be of 40 x 40 x 3 mm size metal shelves: metal shelves shall be made from mild steel sheets of 1 mm thickness. shelves shall have lipped flanges, width of flange being 30 mm and depth of lip 15 mm.gussets: gussets shall be made of 1 mm ( minimum ) thick mild steel sheet and shall be not less than 75 mm long at each end jointing to the shelf and angle post. minimum 8 gussets, four on each on each face shall be fitted to the open type racks.materials:all material supplied is galvanized which is corrosion resistant and rust free ensuring long life. , stainless steel 304 laboratory stools supply of ss 304 bright finished stool, size 350 mm and height 450 mm, as per sketch and attached drawing: dimensions: size of the top: 350 mm round, thickness: 1.6 mm, with 450 mm deep drawn as shown in the drawing. top shall be finished by chrome plating. frame:• number of the legs: 04 numbers • size of the leg: 1 inch pipe, heavy duty. bottom of the legs shall be provided with the rubber or good quality plastic shoe as shown in the picture. • size of the cross leg member: ½ inch pipe, heavy duty. • all the welds shall be smooth and finished. • whole stool shall be bright finished. • the stools shall with stand a load of 100 kgs. • tolerance of ±5% in dimensions is permitted subjected to overall sitting comfort. • all sharp edges shall be removed. , s type chairs chair leg made out of 1’’ 16 gauge round pipe and chair seat and back. teak wood frame with netting finish handle teakwood seat size 18’’ x 17’’ and back seat 18’’ x 14’’ with leg one coat red oxide and two cost enamel paint finish.