bids are invited for title1 - providing and placing closed type steel rack of size 915x450x2000 (wxdxh) having 6 shelves making 5 compartments. shelves & sides made of mild steel sheet not less than 1mm. shelves having load bearing capacity of 100kg. uniformity divided load per shelf. slotted angle shall be 40x40x2mm. shelves & angle shall be joint with galvanized hex. nuts & bolts. each rack shall be provided with rubber shoes at the bottom. all components are duly anti-rust treated and painted for long lasting finish. , title2 - providing & placing table of size 1800x1050x1000mm (wxdxh). table top made of 14 gauge (crca sheet) cold rolled close annealed, as said before that metal is rolled in temperature below recrystallization level, cold rolled are much harder and have smoother finish than hot rolled metal. table having provison of ms l angel of size 40x40x4mm thick at all four corners for extra strength. table having 4 legs made in 50x50mm crca square pipe duly powder coated and base beam made in 50x50mm crca square pipe duly powder coated. all the steel components shall be welded together to form one unit and powder coating of minimum 50-60 microns dry film thickness in conveyorised powder-coating plant with bakin oven and powder applicators after 10 tank pre treatment process flow using hankel chemical. , title3 - providing and placing low height closed type steel rack of size 915x600x1500 (wxdxh) having 2 shelves making 1 compartments. shelves & sides made of mild steel shelves & sides made of mild steel sheet not less than 1mm. shelves having load bearing capacity of 100kg. uniformity divided load per shelf. slotted angle shall be 40x40x2mm. shelves & angle shall be joint with galvanized hex. nuts & bolts. each rack shall be provided with rubber shoes at the bottom. all components are duly anti-rust treated and painted for long lasting finish. , title4 - providing and placing low height closed type shoe steel rack of size 915x400x1200 (wxdxh) having 5 shelv