restoration of flood hit pumping machinery by repair/servicing/rewinding of 2 no.s 75hp motors along with allied works at lis kothey parlah old.- 1 restoration of flood hit pumping machinery by repair/servicing/rewinding of 2 no.s 75hp motors along with allied works at lis kothey parlah old. 2 restoration of flood hit pumping station lis kothey parlah old by way of disconnecting the cables of 2no. 75hp motors from starters and then dismantling with the help of tools & tackles/manual labour from base frame and hc pumps position and then shifting the same through manual head load and then 1oading with the help of manual labour/chain pulley block in mechanical transport for further shifting to the workshop, unloading at the workshop for repairs, reconditioning, rewinding of the motors. dismantling of 75h.p motors at workshop and then extraction of rotor from stator and complete rewinding of the 2no. motors with new copper wires of requisite gauge and specifications of standard make. providing/fitting of new insulation, packing material, then varnishing with superior quality varnish drying in oven in controlled temperature. extraction of bearings from their housings and cleaning by removing silt/dirt from bearing housing, providing/fitting of 2no. bearings to the each motors at d.e and nde as per samples. refitting bearings in housings, greasing properly. back carriage to site after repairs and reinstallation by making connections of motor and testing on idle and load conditions. also repair/rewinding to 3hp motor of priming pump by way of complete rewinding with new copper wires of requisite gauge and specifications of standard make. providing fitting of new insulation. packing material then varnishing with superior quality varnish & drying in oven in controlled temperature. job includes cost of material, rebate to be quoted on old copper scrap and labour charges with hiring charges of tools & tackles.servicing/reconditioning/repair of 1 no. of fasd starters 75hp of lis kothey parlah old by complete dismantling of all the parts of starters and then cleaning all the parts with recommended chemicals. cleaning/servicing of all the contactors and relays with suitable chemicals. providing/fitting of new parts i.e. timer assembly, contactors and relays required after proper checking for smooth operation, making of all the electric connections by providing/fitting of new nuts, bolts and washers. complete job includes cost of material used, transportation charges and labour charges for skilled /semi-skilled labour to be employed at site for execution of job including the out station charges etc. 3 rebate on old parts