supply of c s casting-cast steel-1 cast steel trash plate, as per drawing no.910321 / b-r2. material code is:2708 grade iii ( appx.wt. 400 kgs. + / - 15% each ) 2 cast steel mill roller coupling, as per drawing no.931220 material code is:2708 grade iii ( appx.wt. 1450 kgs. + / -15% each ) 3 cast steel crown pinion, as per drawing no.950727 / a.material code is:2708 grade iii ( appx.wt. 1250 kgs. + / -15% each ) 4 cast steel worm and cast steel worm wheel set for 165 mt capacity vertical crystallizer, as per drawing no.930729. material as per is:2708 gr.iii. weight or other detail. 5 cast steel worm and c.s.worm wheel, as per drawing no.980514. material code is:2708 grade iii. 6 cast steel worm and cast steel worm wheel, as per drawing no.980915. material code is:2708 grade iii. 7 cast steel sprocket for rake carrier as per drawing no.960729 rev-2. material code is:2708 grade iii ( appx. wt. 170 kgs + / - 15% each ) 8 c.s. coller for top roller, as per drawing no.990102:- in single piece ( appx. wt.310 kgs + / -15% ) 9 in two halves ( appx.wt.310 kgs + / -15% ) 10.1 cast steel pinion for cane unloader, as per drawing no.950824 r1.matereial code is:2708 grade iii. 10.2 cast steel pinion for cane unloader, as per drawing no.970826 .matereial code is:2708 grade iii. 11 cast steel gear for cane unloader as per drawing no.941110 / c / rev-2 figure no.1, material as per is:2708 gr.iii. 12 cast steel pinion for rake elevator drive as per drawing no.200817. material as per is:2708 gr.iii. 13 cast steel pinion for cane carrier drive as per drawing no.980824. material as per is:2708 gr.iii ( appx.wt. 8-0 kgs + / - 15% each ) 14 cast steel lever for top roller scrapper as per drawing no.2040330 / rev-1. material code , is:2708 grade iii. 15 cast steel gear for cane unloader drum as per drawing no.990906, material as per is:2708 gr.iii, ( app.wt.190 kgs + / - 15% each ) 16 cast steel sprocket for bagasse carrier, as per drawing no.990521a. material code is:2708 gr.iii ( app.wt. 100 kgs + / - 15% each ) 17 cast steel sprocket for cane carrier as per drawing no.2080430 for cane carrier. material code is:2708 gr.iii ( appx. wt .100 kgs + / - 15% ) 18.1 c.s. worm and c.i. worm wheel for crystallizer as per drawing no. 910914, material as per is: 1030 nfor air cooled crystallizer. 18.2 for water cooled crystallizer. 18.3 for vacuum crystallizer. 18.4 for seed crystallizer 19 c.s. sproket for lime slaker as per drawing no.161104. 20 c.s. hub for fibrizer as per drawing no.2040317 / rev-1 ( appx. wt .150 kgs + / - 15% ) material as per is: 2708 grade- iii 21 heavy job other than above ( having weight above 250 kgs ) 22 light job other then above ( having weight less the 250 kgs ) .