supply of ci cs casted items ci cs casted items , c.i. casted items for boiler furnace, working temprature 1400ºc with meterial basis chemical composition of material - c-2.8 to 3.2% si- 0.5 to 0.7% mg.- 0.6 to 0.85% cr- 0.5 to 0.7% ni- 0.45 to 0.85% sulphur- 0.12% pb ( lead ) - 0.035% cu- 0.12 to 0.20% , c.i. tyyor for boiler drg. no.-wtb-116-fig no. 1 , c.i. tyyor for boiler drg. no.-wtb-116-fig no. 2 , c.i. clit difrent type , c.i. clit for boiler furnace arch bird type , c.i. hanger as per drawing / sample / sketch fig no. 1 & 2 appx. weight fig no-01-25 kg, fig no-02-28 kg as per ibr quality , c.i. hanger as per sample / drawing / sketch fig no-01-25kg, fig no-2-10kg, fig no-03-30kg, fig no-4-42 kg as per ibr quality fig. no. 1, 2, 3, 4 , c. i. boiler door with frame duly machined as per drawing no. ksc / boiler-9290 app. weight 1250 kgs. to be supplied on as per ibr quality , c.i. feed pocket for baggass furnace ( drawing no ksc / wtb / 1410 ) app. weight 350 kgs. as per ibr quality , other c.i. casted items with material basies. , c.i. idler for cane carrier ( i ) as per drawing no. ksc / cc1 / 4 / 17 , c.i. pulley ( as per drawing ) with machining , c.i. coupling different size ( as per drawing ) , c.i. casting various size ( gulla ) as per drawing with rough machining. different size , c.i. casted items for boiler furnace, working temprature 1400ºc on conversion basis chemical composition of material - c-2.8 to 3.2% si- 0.5 to 0.7% mg.- 0.6 to 0.85% cr- 0.5 to 0.7% ni- 0.45 to 0.85% sulphur- 0.12% pb ( lead ) - 0.035% cu- 0.12 to 0.20% , c.i. tyyor for boiler drg. no.-wtb-116-fig no. 1 , c.i. tyyor for boiler drg. no.-wtb-116-fig no. 2 , c.i. clit difrent type , c.i. clit for boiler furnace arch bird type , c.i. hanger as per drawing / sample / sketch fig no. 1 & 2 appx. weight fig no-01-25 kg, fig no-02-28 kg as per ibr quality , c.i. hanger as per sample / drawing / sketch fig no-01-25kg, fig no-2-10kg, fig no-03-30kg, fig no-4-42 kg as per ibr quality fig. no. 1, 2, 3, 4 , c. i. boiler door with frame duly machined as per drawing no. ksc / boiler-9290 app. weight 1250 kgs. to be supplied on as per ibr quality , c.i. feed pocket for baggass furnace ( drawing no ksc / wtb / 1410 ) app. weight 350 kgs. as per ibr quality , other c.i. casted items with material basies. , c.i. idler for cane carrier ( i ) as per drawing no. ksc / cc1 / 4 / 17 , c.i. pulley ( as per drawing ) with machining , c.i. coupling difrent size ( as per drawing ) , c.i. casting various size ( gulla ) as per drawing with rough machining. different size , cast steel spur gear & pinion without meterial basis ( converson ) , cast steel & spur gear- 72 teeth face width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg , cast steel & spur gear- 26 teeth face width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg , cast steel pinion- 24 teeth face width- 70mm, bore- 45mmod- 166.4 mm, module- 6.4-approx weight 9.7 kg , cast steel pinion- 34 teeth face width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg , cast steel gear pinion- 50 teeth & 16 teeth as per drg no. mills-138approx weight 11 kg , cast steel sprocket- 13 teeth 6” pitch as per drg. mills-27 , cast steel pinion- 18 teeth face width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg , c.s.scaper for mills duly machined as per sample drg.no ksc / mh / 91618 approx wt-190kg each , cast steel trash plate ( lenth 1680 mm ) made of is 2708 grade iii duly rough machined as per drg.no – ksc / mh / 285 / 22 , c.s. wheel for cane unloader bridge as per drg.no. ksc / unloader / 2 / 17.approx wt 185 kg. , c.s gear 68 teeth, module-6.14 face width-65mm, o.d--430mm drg no.-ksc / unloder / 17 , c.s.wheel for cane unloder trolly drg no.-ksc / cr / 145 approx.wight-55kg , c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8drg. no.-ksc / unloder / 17 , c.s. sprroket 6 pich 14 teeth drg no.-ksc / m / 1565 ( tail end ) material 2708 , c.s. sprroket 6 pich 14 teeth drg no.-ksc / m / 1564 ( driving shaft ) material 2708 , c.s.sproket-36 teeth for duplex chain 2 1 / 2 pitch material 2708 drg no ksc / boiler-163 , c.s. sprocket 17 teeth for duplex chain 2 1 / 2 pitch material 2708 drg no-ksc / mill / 4887 , opertuinity device of trash turner beam material-ss drg no. mills-8488 , c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm , c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm , c.s.worm shaft ( as per sample ) for mill , c.s. mill coupling ( weight 700kg approx ) as per drawing , c.s. mill crown pinion 16 teeth ( weight 1500 kg. ) as per drawing , cast steel spur gear & pinion with meterial basis ( non converson ) , cast steel & spur gear- 72 teeth face width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg , cast steel & spur gear- 26 teeth face width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg , cast steel pinion- 24 teeth face width- 70mm, bore- 45mmod- 166.4 mm, module- 6.4-approx weight 9.7 kg , cast steel pinion- 34 teeth face width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg , cast steel gear pinion- 50 teeth & 16 teeth as per drg no. mills-138approx weight 11 kg , cast steel sprocket- 13 teeth 6” pitch as per drg. mills-27 , cast steel pinion- 18 teeth face width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg , c.s.scaper for mills duly machined as per sample drg.no ksc / mh / 91618 approx wt-190kg each , cast steel trash plate ( lenth 1680 mm ) made of is 2708 grade iii duly rough machined as per drg.no – ksc / mh / 285 / 22 , c.s. wheel for cane unloader bridge as per drg.no. ksc / unloader / 2 / 17.approx wt 185 kg. , c.s gear 68 teeth, module-6.14 face width-65mm, o.d--430mm drg no.-ksc / unloder / 17 , c.s.wheel for cane unloder trolly drg no.-ksc / cr / 145 approx.wight-55kg , c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc / unloder / 17 , c.s. sprroket 6 pich 14 teeth drg no.-ksc / m / 1565 ( tail end ) material 2708 , c.s. sprroket 6 pich 14 teeth drg no.-ksc / m / 1564 ( driving shaft ) material 2708 , c.s.sproket-36 teeth for duplex chain 2 1 / 2 pitch material 2708 drg no ksc / boiler-163 , c.s. sprocket 17 teeth for duplex chain 2 1 / 2 pitch material 2708 drg no-ksc / mill / 4887 , opertuinity device of trash turner beam material-ss drg no. mills-8488 , c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm , c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od- 208 mm bore-50mm , c.s.worm shaft ( as per sample ) for mill , c.s. mill coupling ( weight 700kg approx ) as per drawing , c.s. mill crown pinion 16 teeth ( weight 1500 kg. ) as per drawing