tender for carriage of power cable & its laying and termination work for 250kva station transformer at 220kv sub station bansi, under electricity transmission division-ii, basti. - supply of cable lug70sq mm 2 supply of cable lug95sq mm 3 supply of cable lug120sq mm 4 supply of cable lug240sq mm 5 supply of cable lug400sq mm 6 supply of cable gland 400sq mm 7 shifting & loading of 200 meter 3.5 core x 400 sq. mm. power cable drum with help of hydra, skilled labour and other t&p at 220 kv s/s dulhiper. 8 carriage of 200 meter 3.5 core x 400 sq. mm power cable from 220 kv s/s dulhiper to 220 kv s/s bansion suitable vehicle covering approx 45 km. with proper safety of material. 9 unloading & shifting of 200 meter 3.5 core x 400 sq. mm. at 220 kv s/s bansi with the help of hydra, skilled labour etc 10 digging out of old & used3.5 core x 400 sq. mm2 . power cable laid75cm below the ground lavel between 33/04 kv sub station t/f to main 440vacdb installed control room of 220 kv s/s bansi. after excavation of trench the ist class brick lining then back flling &levelling the trench after taking out of powercable. the work also inludes opening of cable connection at both end, rerolling of power cable and shifting it into store from switchyard. . 11 laying of 3.5 core x 400 sq. mm2 . power cable to be provided by the department from33/04 kv sub station to main 440vacdb installed control room of 220 kv s/s bansi. 75cm below the ground lavel after excavation of trenchlaying the ist class brick lining , filling of rever sand along and over the cable, then back filling&levelling the trench after laying cable. the work also includes excavation of c.c. road upto 10 meter wherever required, shifting power cable durm from strore to workingsiteand termination of cable on both sides with crimping of suitable size lugs.