work under system augmentation plan in sub division second under ee, edd, barabanki.- 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole 8.5 3 stp pole 11 mtr long 4 top channel 11 kv 5 t-off channel 11 kv 6 ms earthing rod 7 transformer 250 kva 8 transformer 400kva 9 abc cable 3x95 sq. mm. 10 ltcable al 1x240 sq mm 11 acsr weasal conductor 12 stay set complete 13 other line material 14 dragging of pole from je dump store to site 15 concreating and pilinthing of st& pccpole 18x24 cm. 16 erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 swg, nuzzling & grouting. 17 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 18 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33/11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 kv pin & pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 19 installation of d.b. box 20 earthing of pole with ms earthing. 21 stringing and sagging of lt 3x95 abc cable (lt abc cable will be provided by the department) 22 pipe earthing ( boring type) 23 fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 24 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l-pieces, provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor) 25 munting of 250 kva tranformer 26 munting of 400 kva tranformer 27 provindingof various type materials. all materials shall be supplied by the contractor. 28 nut & bolt 29 11 kv do fuse set. 30 tpmo set 31 clamp for top/ dropper and t-off channel etc. 32 dead end clamp with j-hook 33 suspension clamp 34 peircing connectores /clamp 35 pole clamp 36 l t clamp with nut &bolt 37 l t insulator 38 different size of lug 39 copper lug 120 mm 40 copper l piece 250/400/630 kva 41 lt tainless fuse set 300amp 42 lt xlpe cable 1x400 mm 1wire 43 copper controlwire 6mm 4wire 44 copper control cable 2.2.5 sq mm 45 copper control cable 4.2.5 sq mm 46 copper control cable 6.2.5 sq mm 47 copper control cable trey 3.5x50 sq mm 48 lt distribution pannel massionary type 440v 49 fixing of various type materials. all t& p and labour will be provided by the contractor. 50 nut & bolt 51 11 kv do fuse set. 52 tpmo set 53 clamp for top/ dropper and t-off channel etc. 54 dead end clamp with j-hook 55 suspension clamp 56 peircing connectores /clamp 57 pole clamp 58 l t clamp with nut &bolt 59 l t insulator 60 different size of lug 61 copper lug 120 mm 62 copper l piece 250/400/630 kva 63 lt tainless fuse set 300amp 64 lt xlpe cable 1x400 mm 1wire 65 copper controlwire 6mm 4wire 66 copper control cable 2.2.5 sq mm 67 copper control cable 4.2.5 sq mm 68 copper control cable 6.2.5 sq mm 69 copper control cable trey 3.5x50 sq mm 70 lt distribution pannel massionary type 440v 71 lt xlpe cable 1x240 mm 1wire 72 wiremessfencing of 11/0.4 kvs/s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of wire mess. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess shall be welded all along the periphery of theframe as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. diagonal bracing of all the frame panel will be welded with ms flat of size 25x3mm to support as per respo specification & direction of e/i 73 construction of t/f plinth of size 2x2x1.5 mtr with first class brick and massionary work in the ratio 1:4 cement and core sand with rcc top 20 mm 1:2:2cement sand & core sand stone grit with 20 mm ms bar and ms channel for resting of t/f. 74 earthing of t/f pipe type with 40 fit deep borring and providing gi pipe 1.5 dia (60 fit gi pipe) and gi strip 25x5 mmx6 meter long attached with clamps, l piece, nut & bolts and gi pipe cap. all material shall be supplied by the contractor. 75 dismentaling of 63/100/250 kva t/f & carriage site to store 76 dismentaling& shifting of 250 kvat/f 77 other line work