work under system augmentation plan in sub division third under ee, edd, barabanki.- 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole 8.5 3 11kv pin insulator . 4 11kv disc insulator . 5 11kv x-arm 6 transformer 100kva 7 abc cable 3x95 sq. mm. 8 ltcable al 1x240 sq mm 9 acsr weasal conductor 10 lt d.b. box 11 11 kv vcb panel outgoing ctr 200 / 100 / 5 a, 350 mva 12 11 kv vcb incomming ctr 600 / 300 / 5 a, 350 mva 24 volt. 13 stay set complete 14 other line material 15 dragging of pole from je dump store to site 16 concreating and pilinthing of st& pccpole 18x24 cm. 17 erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7 / 8 swg, nuzzling & grouting. 18 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering ( weasal conductor will be provided by the department ) 19 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33 / 11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33 / 11 kv pin & pin insulator. 1 / 6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 20 errectionof singlepcc / st pole for stringing and sagging of conductor 1 / 6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 21 installation of d.b. box 22 stringing and sagging of lt 3x95 abc cable ( lt abc cable will be provided by the department ) 23 pipe earthing ( boring type ) 24 fabricate with hole suitable size in steel items, receive from central store lightas top channel / dropper channel sub station base angle etc. 25 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l-pieces, provinding crimping type aluminium lugs of required size. ( all the material except transformer will be arranged by the contractor ) 26 munting of 250 kva tranformer 27 provindingof various type materials. all materials shall be supplied by the contractor. 28 nut & bolt 29 clamp for top / dropper and t-off channel etc. 30 different size of lug 31 copper l piece 250 / 400 / 630 kva 32 lt tainless fuse set 300amp 33 lt xlpe cable 1x120 mm 1wire 34 lt xlpe cable 1x400 mm 1wire 35 copper control cable 2.2.5 sq mm 36 ltcable al 1x400 sq mm 37 fixing of various type materials. all t& p and labour will be provided by the contractor. 38 nut & bolt 39 clamp for top / dropper and t-off channel etc. 40 installation of 11 kv vcb panel outgoing ctr 200 / 100 / 5 a, 350 mva 41 installation of 11 kv vcb incomming ctr 600 / 300 / 5 a, 350 mva 24 volt. 42 ltcable al 1x400 sq mm 43 earthing of t / f pipe type with 40 fit deep borring and providing gi pipe 1.5 dia ( 60 fit gi pipe ) and gi strip 25x5 mmx6 meter long attached with clamps, l piece, nut & bolts and gi pipe cap. all material shall be supplied by the contractor. 44 testing of control pannel 45 other line work