tender for difference type of work in business plan 2024 25 in the area of edd i moradabad, under the business plan 2024-25 under the area of ​​​​vk-i moradabad under the electricity distribution division-i, moradabad, the work of installing new distribution transformers by removing the overloading of the distribution transformers installed under the following 33/11 power substations under the electricity distribution sub-division- majhola / chaudharpur, 1 safe carriage of following material from store center pvvnl to site of work where work is to be carried out with loading and unloading at both ends. 2 63 kva transformer. 3 100 kva transformer. 4 l.t. a.b.c. cable size of 3x95+1x35+1x16 sq. mm. 5 l.t. a.b.c. cable size of 3x50+1x35+1x16 sq. mm. 6 acsr weasel conductor. 7 pcc poles 8.5 mtr. long. 8 11 kv pin insulator with pin. 9 11 kv disc insulator with fitting. 10 m.s. top channel 125x65x2240 mm. 11 earthing set complete (ms earth rod 20x2500 mm and 06 swg earthing wire etc.) 12 stay rod set complete( stay rod 16x1800 mm, stay wire 5 kg 7/10 swg, stay clamp, bolt and nut with grouting etc.) 13 m.s. dropper channel 100x50x2028 mm. 14 transformer base angle 75x75x6x2028 mm with clamp and bolts and nut. 15 erection/fixing & laying/installation of following materials as per respo manual and as per direction to supervising engineer (complete in all respect). work includes the cost of labour,t&p by providing clamp with nut, bolt, stone pad 300x300x75, j-hook clamp and all other acessaries/material for proper completion of work. 16 single line support with pcc 8.5 meter polewith grouting by providing sand, cement and bricks etc. complete work as per respo norms. 17 double line support with pcc 8.5 meter polewith grouting by providing sand, cement and bricks etc. complete work as per respo norms. 18 grouting of single line support in cc 1:4:6 (cement, sand and 40 mm. brick ballast) grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per respo norms. 19 grouting of double line support in cc 1:4:6 (cement, sand and 40 mm. brick ballast) grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per respo norms. 20 grouting of stay rods (20x1800mm.) including all works of excavation, cement concrete in size of (0.60x0.60x0.30)m in the ratio of 1:4:6 (cement, sand and 40 mm. brick ballast) including back filling of soil and proper ramming etc. 21 fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc. 22 earthing of support with ms earth rod of (20x2500)mm. long including excavation of pit and driving ms rod 3.0m apart from support and 0.5m below the ground level and connecting below the earth electrodes with the help of g.i. wire no.6 swg tightening with nuts and bolts. 23 fixing j-hook clamp with xlpe cable on pole as per norms. 24 11 kv disc insulator with fitting on pole as per norms. 25 11 kv pin insulator with fitting on pole as per norms. 26 filling stone pad in pits for poleas per norms. 27 fixing of clamps with nut & bolts. 28 l.t. abc 3x95+1x70+1x16 sq.mm. 29 l.t. abc 3x50+1x35+1x16 sq.mm.