View Bid Results For Power Quality Management Tenders

We found 970 Bid Results related to power quality management tenders. You can find Contractor details who won power quality management tenders along with contract details in Bid awards announcements section.

Filters
Stage
743
137
90
Tender Publishing Platform
60
910
State / UT
35
197
88
79
65
64
60
55
50
44
30
27
26
18
15
14
13
12
12
11
10
10
10
10
7
7
7
6
4
4
4
4
4
1
1
1
Contract Value
257
165
394
150
Publish Date
4
0
0
0
0
Sector
30
303
131
125
93
73
55
30
29
19
16
16
14
9
6
6
6
6
6
5
5
4
3
2
2
1
1
1
1
1
1
Ownership
6
463
331
90
77
6
3
Within keyword
Active filters:
Showing 1–20 of 970 tenders matching your filters
1.
Defence #11482821 AOC
Tender for Lump Sum Price Worked Out By The Contractor For Buildings And StructuresAs Listed In Schedule A Part-I Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only.The Tenderer Is Required To Quote Their Rate Under Col 13 Against Item Of Works Catered Under This Schedule . , Construction Of Block Of Pump House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Block Of Fire Fighting Pump House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Block Of Power House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Ug Sump Of Capacity 125000 Ltrs Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Static Water Tank (Swt) Of Capacity 75000 Ltrs Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Over Head Tank Of Capcity 40000Ltrs With 21 Metre Staging Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Sch A Part-Ii To X: Note: These Schedules Are Pre-Priced By Mes And The Rate Indicated Against The Respective Schedule Under Col 6 Signifies This Fact Only. The Tenderer Is Required To Quote Their Lumpsum Amount Under Col 13 Against Item Of Works Catered Under These Schedule . , Lumpsum Price Inserted Under Col 13 By The Tenderer For Site Clearance / Site Development, Excavation & Earth Work For External Services, Etc.., As Listed In Schedule ‘A Part Ii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Ii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Internal Water Supply As Listed In Schedule ‘A Part Iii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Iii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Internal Electrification As Listed In Schedule ‘A Part Iv Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Iv , Lumpsum Price Inserted Under Col 13 By The Tenderer For Road / Path / Hard Standing As Listed In Schedule ‘A Part V Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part V , Lumpsum Price Inserted Under Col 13 By The Tenderer For Sewage Disposal As Listed In Schedule ‘A Part Vi Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Vi , Lumpsum Price Inserted Under Col 13 By The Tenderer For Area Drainage As Listed In Schedule ‘A Part Vii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Vii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Chain Link Fencing With Gate As Listed In Schedule ‘A Part Viii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Viii , Lumpsum Price Inserted Under Col 13 By The Tenderer For External Water Supply As Listed In Schedule ‘A Part Ix Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Ix , Lumpsum Price Inserted Under Col 13 By The Tenderer For Fire Fighting As Listed In Schedule ‘A Part X Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-X , Schedule A Part-Xi (Miscellaneous B/R And E/M Items) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only.The Tenderer Is Required To Quote Their Rate Under Col 13 Against Item Of Works Catered Under This Schedule . , Site Clearance / Site Development, Excavation & Earth Work For External Services, Etc.., Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And As Directed. , Internal Water Supply Supply And Fix C. P. Brass Fancy Type Pillar Cock 15 Mm Nominal Bore Of Approved Quality Conforming To Is Standards Complete All As Specified And As Directed. , Internal Electrification Supply And Layng Wiring For One 3 Pin Socket Outlet. 15 Amps, Independent, With Frls Pvc Insulated Copper Conductor Single Core Cables With 3 Runs Of 4 Sq. Mm Size Including Concealed Pvc Conduit And Conduit Accessories, Complete All As Specified And As Directed. Note : 3 Runs Of Cable And One Run Of Conduit Shall Be Measured As One Unit. , Supply And Fixing Led Lights Fitting 1X 20W, 220V, Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose, Complete All As Specified And As Directed. , Supply And Fixing Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection, Complete All As Specified And As Directed. , Supply And Fixing Led Flood Light 100 Watt 230 V Ac Outdoor Type With Thermal Management In Multiple Optics And Equipped With Ip66 Protection, With Impact And Corrosion Resistant Complete With Driver And Lamp, Complete All As Specified And As Directed. , Supply And Fix Exhaust Fan, Steel Body Ac Single Phase. 230V Of Size 300 Mm Sweep With, Blades, And Frame And Louvers Complete All As Specified And As Directed. , Supply And Fixing Air Circulator Heavy Duty (Wall Mounting) Fan 450 Mm Sweep, 230V, Ac, 50 Hz Complete All As Specified And As Directed. , Sewage Disposal Material And Labour For Soakage Wells Excavation, In Any Type Of Soil, Foundation In Plain Cement Concrete 1:3:6, Walls Of Honey Combed Masonry With Top Ring Of M25 Concrete Including Intercepting Chamber And Screen Chamber Made Of Brick Masonry In Cm, Reinforced Cement Concrete Cover Slab In M25/ Steel Fibre Reinforced Concrete Cover, Inter Connecting Pipes Of Rcc/Dwc Complete Filled With Brick Bats Of Size 1.2X3.0M Effective Depth Complete All As Specified And As Directed. , Material And Labour For Lldpe Septic Tank For 05 Users Designed To Carry Sewage And Sullage Water, Including Excavation In Any Type Of Soil, Plain Cement Concrete 1:4:8 Below Foundation, Vent Shaft, Connection Etc, Complete All As Specified And As Directed. , Area Drainage Material And Labour For Extra Over Stone Walling For Hammer Dressing To Face Stones And Dressing Of Face Beds And Joints As Specified Of Face Beds And Joints As Specified Of Random Rubble Walling Uncoursed Or Brought Upto Course With 40Mm Maximum Depression On Face From Straight Edge Held Against The Dressed Surface Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Surface Channels And Drains Etc, Complete All As Specified And As Directed. , Material And Labour For Extra For Forming Fair Finished Drain Or Channel 60 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms, Moulds, Mitred/Stopped Ends Etc, Complete All As Specified And As Directed. Note: Inner Girth Olny Measured. , External Water Supply Material And Labour For Constructing Masonry Chamber 120X120x100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5, Complete All As Specified And As Directed. , Material And Labour For Constructing Masonry Chamber 90X90x100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep (Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ), Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5, Complete All As Specified And As Directed. , Supply And Fix 100Mm Dia Bore Ci Sluice Valve Flanged End Of Class Pn -1.6 With Brass Spindle And Hand Wheel Including Necessary Gasket, Nuts And Bolts, Washer Etc., Complete All As Specified And As Directed. , Supply And Fix Ci (Cast Iron) Foot Valve Conforming To Is 4038, 100 Mm (4) Dia Complete With Rubber Gasket, Gi Bolts, Nuts, Washers Etc Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 80 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 50 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 25 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fix Pressure Gauge 4Dial 0-14 Kgs Rating Complete All As Specified And As Directed. , Material And Labour For Xlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade, Cross-Sectional Area 16 Sq. Mm, 3 Core, Isi Marked, Conforming To Is: 7098 (Part 1)-1988 Having Stranded Aluminium Compact Shaped Conductor As Per Cl. 2, Is: 8130-1984, Pvc Inner Sheath, Single Armouring Of Galvanized Steel Strip / Wire And Pvc Type St-2 Outer Sheath Conforming To Is: 5831-1984, Including Termination Complete As Specified And As Directed. , Supply, Installation, Testing And Commissioning Of Monoblock Pump Set Suitable For 415 V, 3 Phase System Having Capacity 10 Hp/ 7.5 Kw, 24-39 Metre Head, 3000 Rpm, Discharge Range 1150-550 Lpm, Suction And Delivery Pipe Size 80 X 65 Mm Dia Including Foundation, Base Frame Etc. Complete All As Specified And As Directed. , Supply, Laying & Testing Pvc Insulated, Pvc Sheathed Cable Galvanized Steel Strip Or Wire Armoured, Electric Control Cables (Heavy Duty) With Stranded Copper Conductor Of Size 2.5 Sq Mm, 3 Core, 1100 Volts Grade, Extruded Pvc Type St2 Sheathed, Conforming To Is 7098 (Part 1) 1988 Complete All As Specified And As Directed. , Supply And Fix Dol Control Panel, 3 Phase, Voltage Range 275-475Volts, 5 Hp/3.75 Kw, Relay Range 6-10A Complete All As Specified And As Directed. , Supply, Installation, Testing And Commissioning Of Monoblock Pump Set Suitable For 415 V, 3 Phase System Having Capacity 5 Hp/ 3.5 Kw, 24-39 Metre Head, 3000 Rpm, Discharge Range 900 Lpm, Suction And Delivery Pipe Size 50 And 40 Mm Dia Including Foundation, Base Frame Etc. Complete All As Specified And As Directed. , Supply, Install, Testing And Commissioning Of Weather Proof Lt Panel Indoor Type Made Out Of Crca Sheet 2.0 Mm Thick, Cubical Type Factory Made With Front Opening Type Free Standing, Suitable For 415 Volts, 3 Phase, 4 Wire, 50 Hz, Ac Supply Having 4 Nos Aluminium Bus Bars Of 200 Amps Capacity Duly Insulated With Heat Shrinkable Colour Coated Sleeve Complete, Painted With Powder Coated With Locking Arrangement, Mounted On Ms Angle Base Frame Of Size 50 X 50 X 6Mm Including Grouting In Pcc. The Lt Panel Povided With The Following Accessories Complete All As Specified And As Directed :- (A) Mccb 415 Volts 4 Pole 125 Amps, 18Ka - 01 (As Incomer). (B) Digital Led Multi Function Meter With Inbuilt Selector Switches, Class 0.5 Including Cts - 01 No. (C) Phase Indicated Lamp Led Type With Back Up Fuse For 3 Phase - 02 Set (Ryb). (D) Mccb 415 Volt 4 Pole 63 Amps 16 Ka - 03 Nos (As Out Going). (E) Mcb Spn 40 Amps, 10 Ka, C Curve - 02 Nos, (F) Star-Delta Starter 10 Hp/ 7.5 Kw, 20-32A, 275-475 Voltage - 02 Nos , Supply, Install, Testing And Commissioning Of Weather Proof Lt Panel Indoor Type Made Out Of Crca Sheet 2.0 Mm Thick, Cubical Type Factory Made With Front Opening Type Free Standing, Suitable For 415 Volts, 3 Phase, 4 Wire, 50 Hz, Ac Supply Having 4 Nos Aluminium Bus Bars Of 200 Amps Capacity Duly Insulated With Heat Shrinkable Colour Coated Sleeve Complete, Painted With Powder Coated With Locking Arrangement, Mounted On Ms Angle Base Frame Of Size 50 X 50 X 6Mm Including Grouting In Pcc. The Lt Panel Povided With The Following Accessories Complete All As Specified And As Directed :- (A) Mccb 415 Volts 4 Pole 125 Amps, 18Ka - 01 (As Incomer). (B) Digital Led Multi Function Meter With Inbuilt Selector Switches, Class 0.5 Including Cts - 01 No. (C) Phase Indicated Lamp Led Type With Back Up Fuse For 3 Phase - 02 Set (Ryb). (D) Mccb 415 Volt 4 Pole 63 Amps 16 Ka - 03 Nos (As Out Going). (E) Mcb Spn 40 Amps, 10 Ka, C Curve - 02 Nos, (F) Star-Delta Starter 10 Hp/ 7.5 Kw, 20-32A, 275-475 Voltage - 02 Nos
Contract Date: Jul 01, 2026 Contract Value : 2.63 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
2.
Housing Urban and Rular Development #11475953 Technical Bid
bill of quantities (boq) for renovation of toilets at eight floors (ground floor, 1st, 2nd, 3rd, 4th, 5th, 6th & 7th floors) and pantry at 8th floor of ncdc headquarters building, 4, siri institutional area, august kranti marg, new delhi – 110016 schedule a- civil works sl. no. description of items unit quantity rate amount sub-head : 1 dismantling / demolition works , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. , dismantling tile work in floors,walls and roofs laid in cement mortar including stacking material within 50 metres lead. , dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead , of area 3 sqm. and below , dismantling old plaster or water proofing or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. , demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar , dismantling of flushing cistern of all types c.i./pvc/vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. , vitreous china water closet indian / european , vitreous china wash basins / urinals , dismantling existing floors of bathrooms and toilets as per instructions. the cost inclusive of stacking of dismantled materials (serviceable material) in good condition and also disposal of broken unserviceable materials at contractors own place. , dismantling of existing cp brass fittings, bottle traps and existing gi & ci pipes / fittings, wherever required in toilet as per instructions. the cost inclusive of stacking of existing brass fittings as per instructions of engineer - in - charge and the location directed by him. , dismantling & removal of malbaa from the sunken areas including stacking of serviceable and unserviceable material separately in the lead of 50 mts.after digging the same till the existing waterproofing is visible. the unserviceable material (inclusive of existing waterproofing, if any, of any nature) shall be removed from the sunken areas and the contractor should stack the same at his own place. sub total 0.0 sub head:2 wood work , providing and fixing wood work in frames of doors, windows, celestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). a. sal wood , providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws , extra for providing and fixing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter is to be measured for payment purpose). sub total 0.0 sub head:3 finishing work , providing and applying 12mm cement plaster including making grooves wherever required of mix 1:6 . (1 cement :6 coarse sand) , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “t” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “t” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “t” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “t” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main “t” runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer-in-charge. , 12.5 mm thick square edge pvc laminated gypsum tile of size 595x595 mm, made of gypsum plasterboard, manufactured from natural gypsum as per is 2095 part i and laminated with white 0.16mm thick fire retardant pvc film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side pvc film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. , providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 800x800 (note: a. base rate of tile in the range of rs.90-95/- per sq.ft. b. brands: kajaria, euro, rak ceramics, somany or equivalent only ) , providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointingwith grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 800x800 mm (note: a. base rate of tile in the range of rs.90 -95 per sq.ft. brands: kajaria, euro, rak ceramics, somany or equivalent only ) , providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. completeat all levels.granite stone slab of colour black, cherry/ruby red , providing and fixing1500x500 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed towooden cleats with c.p. brass screws and washers complete.mirror make:asahi, saint gobain or equivalent as approved by engineer in charge sub total sub head:4 waterproofing work , providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of w.c., kitchen and the like consisting of: (i) ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to is : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) iind course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) iiird course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv)ivth course of 400 micron thick pvc sheet. (overlaps at joints of pvc sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). , providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. this layer will be allowed to air cure for 4 hours. (b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. , supplying and filling in sunken with sand under floors, including watering,ramming, consolidating and dressing complete. sub total 0.0 sub-head : 5 plumbing / sanitary work , providing and fixing white vitreous china pedestal type water closet(european type-one piece) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floorswherever required : w.c. pan with isi marked white solid plastic seat and lid , providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required:white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests , providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (i)white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps , providing and fixing white vitreous china flat back half stall urinal of 710x485x300 mm or 640x370x310 or 610x390x370mm sizes with white pvc automatic flushing cistern, with fittings,standard size c.p. brass flush pipe, spreaders with unions and clamps (allin c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet gratingand other couplings in c.p. brass, including painting of fittings and cuttingand making good the walls and floors wherever required : range of two half stall urinals with 10 litre p.v.c. automatic flushing cistern , providing and fixing stainless steel a isi 304 (18/8) kitchen sink as peris:13983 with c.i. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required :kitchen sink with drain board 510x1040 mm bowl depth 225 mm , providing and fixing stone slab with table rubbed, edges rounded and polished,of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting achase of appropriate width with chase cutter and embedding the stone in thechase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 6 mm nominal size) as per direction of engineer-in-charge and finished smooth. (granite stone of approved shade) , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work, including cutting chases and making good the walls etc.following dia mm nominal outer dia pipes),(astral, ashirwad or quivalent make) , 15mm nominal outer dia. pipes , 20mm nominal outer dia. pipes , 32mm nominal outer dia. pipes , 50mm nominal outer dia. pipes , providing and fixing 3 layer pp-r (poly propylene random copolymer)pipes confirming to is:15801 uv stabilized & anti - microbial fusion welded,having thermal stability for hot & cold water supply, including all pp - r plain & brass threaded polypropylene random fittings, including trenching,refilling & testing of joints complete as per direction of engineer-in-charge. (concealed work, including cutting chases and making good the walls etc.following dia mm nominal outer dia pipes),(astral, ashirwad or equivalent make) , 100mm nominal outer dia. pipes , 150mm nominal outer dia. pipes , all internal sanitary works , providing and fixing c.p. brass long nose bib cock of approved quality (15 mm nominal bore) , providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , providing and fixing brass 2 in 1 pillar cock of approved quality (15 mm nominal bore) sub total 0.0 total sch a 0.0 schedule b- elctrical works sl.no. description unit quantity rate amount (in rs.) , wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable etc. as required.(wire make- havells, polycab, finolex or equivalent. modular switch, socket, box, plate, etc make- havells, roma or equivalent. steel conduit make-bec, unicon or equivalent) , group c , wiring for circuit/ submain wiring along with earth wire with the following sizes of frls/hffr pvc insulated copper conductor, single core cable in surface/recessed steel conduit as required.(wire make- havells, polycab, finolex or equivalent) , 2 x 4 sq. mm + 1 x 4 sq. mm earth wire , 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire , supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.(make- havells, schneider or equivalent) , 250 mm x 300 mm x 100 mm deep , 180 mm x 100 mm x 60 mm deep , supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(make- havells, roma or equivalent , 3 pin 5/6 a socket outlet , 5/6 a switch , 15/16 a switch , 6 pin 15/16 a socket outlet , supplying and fixing following size/ modules, gi box along with modular base & cover plate for modular switches in recess etc. as required.(make- havells, finolex or equivalent , 8 module (125mmx125mm) , 12 module (200mmx150mm) , 6 module (200mmx75mm) , installation, testing and commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(make- havells, crompton or equivalent , 510 mm sweep , led down lighter (cob type) (system lumen efficacy ≥120 lm/watt ) supplying, installation, testing & commissioning of led recessed/surface down lighter (round / square/ rectangular) cob type of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency 85%, operating voltage ac 140-270 volt, frequency 50/60 hz, operating temp range -5 0c to 40 0c, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10%, p. f.≥0.95, ip20, cri 80 , ugr (unified glare rating) 19, flicker free (flicker should be below 5 %), life time (led, driver & electrical circuitry), life time of minimum 50000 burning hours with, 70% of initial lumen maintained till life ends , cct 3000°k / 4000°k / 5700°k /6500°k (as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy ≥120 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted shape size and cct shall be as approved by engineer-in- charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c). powder coated die cast /extruded aluminium body including trim with aluminium reflector(make- havells, philips or equivalent) , 12 -15 watt , led batten light (system lumen efficacy ≥120 135 lm/watt) supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency 85%, operating voltage ac 140- 270 volt, frequency 50/60 hz, operating temp range -5 0c to 40 0c, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f.≥0.95, ip20, cri 80, flicker free (flicker should be below 5 %), life time (led,driver & electrical circuitry), of minimum 50000 burning hours with 70% of initial lumen maintained till life ends, cct 3000°k / 4000°k / 5700°k /6500°k 46 delhi schedule of rates (e&m)-2025(as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy ≥120 135 lm/watt output. lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c).powder coated die cast /extruded aluminium body (thickness 1.20 mm)(make- havells, philips or equivalent) , 18- 22 watt , led strip light (make- philips, wipro or equivalent) , automatic hand dryer (make- dolphy, euronics or equivalent) , automatic touchless toilet urinal sensor alongwith solenoid valve, flexible hose, etc(make- parryware, jaquar or equivalent) total sch b total total (sch a+schb) 0.0 say rs.
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 5
3.
Health and Family Welfare #11430568 Technical Bid
Tender for Pruchase Of Surgical And Sutures Items At Govt Hospital Bundi , Surgical And Sutures , Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should Be Sterlized. , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set • Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Blood Containers • Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer. • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Transfusion Rate • Should Conform To Is 9824(Part 3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 8 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 18 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size18 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size20 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size22 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 24 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use) • For Gravity Feed Only • Sharp And Easy Piercing Spike With Air Vent • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Self Sealing Latex Bulb Which Will Also Act As An Port For Extra Medication • Efficient Roller Clamp To Control And Adjust The Fluid Rate • 21 G Needle • Should Conform To Is 12655 -4 Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) • Burette Type Measured Volume Chamber Of 100 Ml • Drop Size Of Approx 60 Drops Per Ml • Injection Port,Latexfree, For Intermittent Medication. • Floating Auto Shut Off Valve (Latex Free) In Burette. • Soft And Kink Resistant Pvc Tubing. • Roller Controller For Flow Control • Tube Length 150 Cm • 23G Needle • Should Conform To Iso 8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.) • Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Per Ml • Sharp And Easy Piercing Spike • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Fluid Rate • Should Conform To Is 12655 - 4 Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 16G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 20G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 22G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port. Size 24G • Suitable For Paediatric & Neonatal Use • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Mucus Extractor Sterile • Clear Transparent Container • Antibacterial Filter • Soft, Kink Resistant Pvc Tubing • Tube Size 10 Fg; Length 40 Cm (Min.) • Capacity 25 Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Adult) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Pediatrics) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Paper Adhesive Plaster 1 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Paper Adhesive Plaster 2 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Paper Adhesive Plaster 3 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Plaster Of Paris Bandages 15Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 10 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 12 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 14 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 16 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 18 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Scalp Vein Set (Disposable): Size 18G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 20G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 22G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 24G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size 11 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 15 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 22 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Urine Collecting Bag, Disposable 2000 Ml • Transparent Sheet • Kink Resistant Flexible Tubing Not Less Than 90 Cm In Length • Should Have Non-Return Valve • Top Drainage Outlet • Graduated Bag • Moulded Handle For Easy Handling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Endotracheal Tube, Plain - Size 2.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use - Size 6Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 6.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Cuffed - Size 4Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 4.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 9 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line • Balloon With Non Return Valve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedule F(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Skin Graft Knife Blade (Sterile) (Disposable ) Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759. 2. Skin Grafting Knife Handle (Watson Modification Of HumbyS Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1Mm Length Of Wire Should Be Mentioned With Specification. Should Conform To Is 8261 , K Wire, Length 375 Mm;1.6Mm • Length Of Wire Should Be Mentioned With Specification. • Should Conform To Is 8261 , K Wire, Length 375 Mm; Size 1.8Mm • Length Of Wire Should Be Mentioned With Specification. •Should Conform To Is 8261 , Face Mask, Disposable • Should Be Manufactured From Non Woven Poly Prop Fabric • Should Be 3 Ply Construction • Should Have High Bacterial Filtration Efficiency • Should Be Heat Sealed To Keep 3 Layers Together • Standard Size 17.5 X9 Cm • Color Green/Blue • There Should Be A String Each At All Four Corners,Length Of String Should Be 40Cm • Nose Clip Should Be There • No Elastic Band. , Surgical Cap, Disposable (For Surgeons) • Should Be Manufactured From Non Woven Fabric. • Strip For Tying The Cap Stitched On The Back For Proper Grip On The Forhead. • Green Colour • Ultrasonically Stitched • Air Permeable/Breathable • Should Retain Skin And Hair Particle. • Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses) • Should Be Manufactured From Non Woven Fabric • Blue / Green Colour • Round Upon Wearing, With Elastic • Air Permeable / Breathable • Should Retain Skin And Hair Particles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 11 D To +17.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 18 D To + 24 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D ) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 11 D To +17.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 18 D To + 24 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Bioconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powdered,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powder Free,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line • Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient • Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Secure Fitting. • Pressure Upto 800 Psi • Length 200 Cm • Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml • Should Have Suitability For Both Male And Female Patients • Should Be Provided With Adhesive For Fixation And Good Grip With Minimal Risk Of Allergy And Injury • Capacity 100 Ml • Sterile , Umbilical Catheter (For New Born) All Sizes • Radio Opaque Line • With Female Flexible Mount • Colour Coded Connector • Open Tip Should Be Soft, Rounded, Atraumatic • Length 40 Cm , Umbilical Cord Clamp • Suitable For Clamping Umbilical Cord Of New Born • Security Lock To Prevent Accidental Opening After Clamping • Grooved Clamping Area , Absorbable Oxidized Regenerated Cellulose Net Size 2X 3 With Surgical Sponge Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And YConnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 16 Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And YConnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 18 Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc. 3. Back Strip - A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesive Material. 4. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Total Pad Length 210 +_ 10 230 +_ 10 Width 60 To 75 70 To 85 Thickness 8 +_ 2 5. Weight : Not More Than 10 Gm . . Instruction For Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc 3. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Pad Length 220 +_ 10 Width 70 +_ 5 Thickness 17 +_ 3 4. Weight : 12 +_ 3 Gm 5. Pack - Six Napkins In A Pack. 6. Elastic Belt With Loops Shall Be Provided In Each Pack. 7. Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Every Packet. , Oxygen Mask (Adult) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. , Oxygen Mask (Paediatric) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. • Mask Connector 4M , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14 • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For A Traumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30+- 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is 11497 • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 , Nelaton - Catheter Size 14 Fg Distal End Is Close And Proximal End Has Female Colour Code Connector • Soft, Kink Resistant Medical Grade Pvc Tube • Length:40 Cm • Individually Packed In Poly And Sterile , Ecg Electrode •Reliable Trace, •High Conductivity,• Easy To Handle , Surgical Blade Sterile, Size 23 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Urethral Catheter 90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length, •Suction Handle With Suction Tube •Sterile,• Pyrogenic Free, •Latex Free,• Single Use , Epidural Minipack 18G, 90 Mm, Metal Stylet For Single Use Only, •Sterile, •Epidural Catheter 20G, L 90 Cm, •6 Lateral Holes Closed End, •Borst Adapter •Epidural Catheter Flat Filter 0.2 Micro Meter •Thread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6 Ml , Vascular Catheter 16G/5Fr, Double Lumen Length 40Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr*10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm Introducer Needle 21 G *7 Cm, Syringe - 10 Ml Tuer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape, 5 Fr Pressure Injectable Picc Line With Blue Flex Tip 40 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire, 4Fr Single Lumen, Distalvalve, Saline Flush Only Size 45Cm Or More Usfda/ Four Digit Notified Ce Approved (Logline Iv.) Internal Stylet, Statlock Stabilization Device (Suture Less), Introducer Needle, Micro Introducer With Vessel Dilator, Guide Wire- 50 Cm Nitinol, Safety Scalpel,Suture Wing, End Cap , Vascular Catheter With Metal Guide Wire 3Fr Single Lumen,Micro Introducer,Contrast Media Compatible, Size 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml,Internal Stylet,Measuring Tape,Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G, Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G, Safety Scalpel, End Cap , Vascular Catheter 7Fr-16 Cm With Chlorhexidine, Silver Sulfadiazine Coated Triple Lumen Usfda/Bis With Testing Standard. Introducer Needle 18 G., Spring Guide Wire 45 Cm J Tip, Dilator 8.5 Fr., Raulerson Spring Introduction Syringe 5 Ml , Vascular Catheter 5Fr/16G, Double Lumen Length 50Cm.Usfda/Four Digit Notified Ce Approved. Should Have Two Guide Wire 45 Cm & 80Cm Or More(Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm, Introducer Needle 21 G *7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 50 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter 5Fr/16G, Double Lumen Length 55Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm,Guide Wire Nitinol 80 Cm,Guide Wire Nitinol 45 Cm,Introducer Needle 21 G*7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 55Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire 5Fr Double Lumen, Introducer Safety Piv Catheter20g, 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G,Safety Scalpel, End Cap , Vascular Catheter With Metal Guide Wire,5Fr Triple Lumen, Size Range 55Cm Or More (Logline Iv:) Usfda/Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator, Guide Wire-50 Cm Nitinol, Needle Introducer 21 G, Safety Scalpel,End Cap , 3 Way Stop Cock , Non Pyrogenic & Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 10 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 50 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 100 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 150 Cm (Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) • Graduated Bag, • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 1M X 10Cm Adhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G · Should Be Packed In Transparent Single Blister Pack · Should Confirm To Is 10555 Standard · (Neonatal Iv Cannula Size 26) , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Small Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear · Should Be Single Use With Bronchoscopy And Co2 &O2 Port With Chin Support · Non Allergic, Leak Proof, Contour Should Be Maintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult) · Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducer System. · Chemo Port Huber Needle 20G And 22G. , Chemotherapy Port &Non-Coring Needles(Pediatric) Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducer System Chemo Port Huber Needle 20G And 22G. , Core Biopsy Instrument With Compatible Co-Axial Needle (Automatic Disposable) , Bone Marrow Biospy Needle , Eyelid Occlusion Dressings Use For Eyelid , Eye Pressure Shield , Nonabsorbable Polypropylene Light Weight Macroporous Mesh. Usfda/Ce Certificate With Nnotified Body. , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm. Circular Usfda/Ce Certificate With Notified Body , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm.Circular Usfda/Ce Certificate With Notified Body , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96 Mm Width And 0.61 Mm Diameter Usfda/Ce Certificate With Notified Body. , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Linear Cutter 55Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Universal Linear Cutter Cartridge 55-60 Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55-60 Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3- D Staple Technology. , Curved Cutter Stapler 40 Mm Linear Cutter Or Curved Shaped Radial Stapler Cartridge For Simultaneous Cutting And Stapling , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm, Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Circular Stapler 33Mm With Controlled Tissue Compression With Adjustable Staple Hight (1.5-2.2 Mm) For Controlled Tissue Compression Longer Staple Leg 5.2 Mm To 5.5Mm , & Non Slip Grip Surface , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Procedure For Prolapse And Hemorrhoids Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler (With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 4.0Mm - 5.5 Mm), Suture Threade, Circular Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Optically Guided Bladeless Trocar 12Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Optically Guided Bladeless Trocar 12 Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer Length 100Mm. , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Varied Staple Height Reloads/Cartridges For 80 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 60 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 60 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Eea Circular Stapler Purple Colour Medium Thick , Triple Row With Tristaple Technology (Three Row Of Staple Inner To Outer Row 3.0,3.5 And 4.0 Mm With Sloped Cartridges Face In One Stapler) Diameter 31Mm , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 80 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 80 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Wound Protector With Double Ring In Medium 5-9 Cm , Endo Catch Specimen Removal Kit:With Continuous Ring ,Polyurethane Pouch With 34.5 Cm Shaft Length , 10Mm With Leakproof And Impervious Material To Cancer Cells Of 0.5 Microns/ Pretied Purse String On Pouch Usfda Approved , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology/Over Load Mechanism And Digital Display/Clip Indicator Titanium Alloy Clips- U Shaped. , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cutter With Or Without Integrated/ Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Colour Coding 60Mm Cartridges On Same Gun. , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,9Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Up To And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip- Focus 9 , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,17Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Upto And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip - Focus 17 , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter ,Ergonomic Handle Compatible With Ultrasonic Energy Source, Capable Of Hand And Foot Activation With An Integrated Hand Piece And Transducer. , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy Probes Compatible With Focus Plus Shear- Hp Blue , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy Probes Compatible With Ace Plus Shear Hp054 , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (2*2 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*2) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*1 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (1.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (3 Mm) Diameter Drill Bit Machine With Insertion Tools , Speech Prosthesis For Laryngectomy 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (8 Mm) , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Tan Colour Code For Vascular Applications , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Purpule Colour Code For Medium To Thick Tissue , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mm Leg Length , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm Or Size 2-3*5- 6Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm Or Size 5-7*7- 11Cm Or Size 4*8Cm , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism: Medium/Large Size , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Design Technology Medium , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Central Neck Line - Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Bis With Testing Standard. , Microcatheter For Aneurysm, Two Tip, Outer Diameter-2.1 To 2.4 & 1.7 Fr. Inner Diameter- 0.017 To 0.015. Nitinol Brading, Straight Tip Compatible With 0.014Microwire. It Should Have Radio Opaque Tip & Hydrophilic Coating. , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Intracranial Device: Stent Deployment0.027.Id , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Flow Divertor Delivery With Single Tip Markar 0.027 Id , Flow Guided Microcatheter Extruded Construction Proximal Size 2.7 F Middle Size 2.4 F Distal Size 1.2 To 1.8 F Working Length 155 To 180. Catheter Endo Hole Diameter 0.009 To 0.13. Compatible With 0.007 To 0.010, It Should Have Radio Opaque Tip & Hydrophilic Coating Compatible With Dmso. , Stinless Steel Hydrophilic Coated 0.14 Neuro Guide Wire With Twister Technology, Microridge Design, Optimized Core Wire Profile 205Cm In Length & Coil Length 5Cm , Aortic Punch 4 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.6 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Laproscopic Port With Trocar 5Mm Optically Guided Bladeless Trocar 5Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. 14G X 11Cm To 20Cm , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx11cm Or Above) , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx15cm Or Above) , • Incise Drape Made Up Of Polyester Film With An Acryllc Adhesive That Contains A Complex Of Lodoform (N- Vinyl 2 Pyrrolldine) With A Lodine Concentration Of 0.092 Mg Lodine/Cm2. • Film Should Be Breathable And Conformable To Skin, Compatible With Povidone And Chg Skin Preps. • Lodine From The Drape Should Be Present In The Deepest Skin Layers (1000 Microns Depth) Where Hair Follces Exist Apart From Killing Microbes On Skin Layer. • Produst Should Be Registered As A Class ‘D Medical Devise With Cdsco India Since ItS A Antimicroblal Product. • It Should Be Gamma Sterile And Us-Fda Approved. Size Should Be 56Cm 45Cm (Adhoslve Area) , Rem (Return Electrode Monitoring) Single Use, Corded Patient Return Electrodes Conductive Adhesive Hydrogel With Usfda , Surgical Gloves 6.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Ionic Silver Highly Absorbent Multilayer Foam Dressing With Broad Spectrum Antimicrobial , Bactericidal Efficacies And Having A Soft Siliconadhesive Wound Contact Layer , Providing Sustain Release Of Silver Upto 7 Days. Size: 10 Cms X 10 Cms And More , Self-Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms And More , Double/Single Wall Resuscitator With Peep Valve In Adult (Double Wall Resuscitator With Peep Valve In Adult It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable/Eto Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult Bag Volume: Mark Iv (1300 Ml Or More) Weight: Adult (415 G) And More It Should Be Us-Fda, Ce & Iso Certified Adult , Double Wall Resuscitator With Peep Valve In Paediatrics It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult & Peadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume: Mark Iv Baby (300 Ml) Weight: Baby (190 G) It Should Be Us-Fda, Ce & Iso Certified , Single Patient Use Sebs Resuscitator (With Peep Valve In Neonatal 220-300Ml) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Neonate(220-300Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso/ Us Fda Certified. Or As Per Who Specification. , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Offset Connector Cardio Sensor Electrodes • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm • • Sizes -Adult , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Ultrasorbs Ap Disposable Drypads, Dry Pad For Moisture Management, 58.4X90cm, With Breathable Layer, Super Absorbent Core, Aqua Shield Film And Air Permeable Back Sheet, Absorbency Of 1800-2300Gm, Usfda/Ce/Bis Compliant, Iso13485 Compliant , Over-The-Ear Nasal Cannula Over-The-Ear Nasal Cannula With Star Lumen, 50 Tubing, Must Be Flexible Contoured Lip Tab Provides A High Level Of Stability And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Crush- And Kink-Resistant Tubing. Usfda/Bis With Testing Standard. , Pediatric Nasal Cannula Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Adult) Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification , Volumetric Incentive Spirometer (Pediatric) Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Mask For Tracheostomy Adult Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pardiatric Mask For Tracheostomy Pediatric Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Adult Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6Ft -7Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Usfda/Bis With Testing Standard. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Limb Portable Adult Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 70-72 Inch. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us- Fda/ Eu Ce Four Digit Notify/ Iso , Infant Prong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 With Designed To Reduce Trauma Associated With Delivery Of Infant Nasal Cpap. Must Be Soft Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fitting On Expiratory Connector To Allow Proximal Airway Pressure Monitoring. Each Set To Include, Soft Siliconised Cannula; Inspiratory & Expiratory Elbow Connector; Knit Cap; Two 6 In. Hook And Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters Bacterial Filtration Efficiency≫ 99.99 % And Viral Filtration Efficiency ≫ 99.9999% . Filter Membrane Should Be Of A Hydrophobic Non-Woven Polypropylene Material. Should Be Tailored To Meet The Specific Needs Of Both Anaesthesia And Intensive Care. , Tracheostomy Hme: 1 Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients. 2 Should Have In Built Oxygen Port. 3 Should Be Compact & Light Wt. 4 Should Be Suitable For Ambulatory Patients, Sampling And Suctioning Can Be Done Without Removing It. 5 The System Should Have Kink Resisting Oxygen Tubing , Double Lumen Endobronchial Tube Left: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left: Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. Should Have Clear Polycarbonate Body To Provide Durability And Visibility, Airless Rotator And Large Bore Inner Lumen Throughout Including Rotator Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard. , High Pressure Tube High Pressure Tubing In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard. , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 76Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 183Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , Torque Device Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load- Release Mechanism.Usfda Approved , Radial Band Radial Hemostatis Band In 24 Cm . Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Radial Band Radial Hemostatis Band In 29 Cm. Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Angiography Needle Angiography Needle In 18G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 20G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Angiography Wire Long Length Ptfe Guidewire In .035, .038, With Exchange Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coatting For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , H10ydrophilic Wire Long Length Hrophilic Guidewire Of .018, .025, .035, .038 In 150-180Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved. , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 220-260Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved. , Hydrophillic Braided Sheath Hydrophilic Braided Sheath Introducer In 4F To 7F, Length: 7Cm, 10-11Cm, 15-16Cm, 23-25Cm Or 7-25 Cm With The Option Of .018, .021, .025 Plastic Jacketed And Spring Coil Guidewire. Should Have Ultra-Thin Wall And Flat Wire Braiding Technology To Provide Support And Low Profile.Usfda Approved , Femoral Sheath With Needle Femoral Sheath In 5F To 8F, Length: 11-25Cm With Puncher Needle Of 18G And Guidewire Of .035, .038. Should Have Rotating Suture Ring, Snap-Fit Dilator To Prevent Slipping During Insertion And Holster Pack. Should Be Available In Polypropylene. Usfda Approved , Angiography Radial Catheters Diagnostic Radial Catheter With Radial Ultimate Curve In 4-6F. Lenght Of 100Cm, 110Cm, 125Cm. Should Have Four Type Of Radial Ultimate Curves. Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Us Fda Approved , One Loop & Triple Loop Snare Snare Kit(2-35Mm Diameter, 90-Degree Nitinol & Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2-45Mm Diameter, Three Interlaced Nitinol Loops) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Relief Hub To Reduce Buckling And Unique Peel Away Insertion Tool. Usfda Approved , Ptca Kit (1) Three Port Manifold With Knobs To TurnRight When Open (2) One Pressure Line, (3) Fluid Connecting Line, (4) Contrast Connecting Line, (5) One Three Way Stop Cock, (6) One Y-Connector Hemoststic Valve With Spring Type Push And Release Mechanism, (7) One Inflation Device With Manometer Upto 30 Atm (Easy To Operate With Luminescent Dial), (8) One Luer Lock Controlled Syringe Of 10 Ml With Finger Grip, (9) Insertion Needle, (10) Torque Device.Usfda Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 5Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 7Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 8Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.S Eparate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes Are 10Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 12Fr. Usfda/ Notified Ce Approved , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 5.5Mm , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. T Size 13Fr . , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. Sizes 16Fr. , Catheter Mount Double Swivel Connector, It Should Have Bronchoscopy Port . It Sholud Be Approved By Us Fda , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 20Fr Length (0.8 - 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 24Fr Length (0.8 - 5.0) , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes - 24Fr , Anti Microbial Gloves 6 , Anti Microbial Gloves 6.5 , Anti Microbial Gloves 7 , Anti Microbial Gloves 7.5 , Anti Microbial Gloves 8 , Anterior Chamber Iol Pmma Material, Single Piece Kelman Multiflex Design5-6 Mm Optic Size With 12-13 Mm Overall Size Biconvex Power Range +12 To +24Should Be Iso Or Ce Certified. , Capsular Tension Ring Standard Capsular Tension Ringpmma Material With One Eyelet Each At Each End 10 Mm To 12 Mm Overall Diameter Sterile Should Be Iso/Ce Certified Mfg. , Neonatal High Flow Nasal Cannula Having 8 Litre Flow. Should Have Soft Tip . , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 0.7Ml/Min) , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 4.5Ml/Min) , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) Us Fda + Ce/ Dgci Approved·· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 4F Us Fda + Ce/ Dgci Approved·Sizes 4 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved·Sizes 5 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 6F Us Fda + Ce/ Dgci Approved· Sizes 6 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Ptfe Coated Diagnostic Guide Wire - (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In , 0.035 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved·Should Be Available In 0.032 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 150-180 Cm Long , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Multipurpose Catheter Us Fda + Ce/ Dgci Approved Multipurpose Catheters In Various Standard Curves And Lengths. , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Nternal Mammary Catheter 7Fr Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , By-Pass Graft Catheter 5Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 6Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 7Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved · , Introducer Sheaths For Pediatric Use (Size 5 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3- Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Arterial Pressure Monitor Lines (100 Cm Long) Us Fda + Ce/ Dgci Approved·Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (150 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (200 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Venaseal Closure System For Varicose Veins Usa/Fda Approved N Butyl Based Adhesive Formation 50/90/105/120 Cm 145 Cm(3/4/6/8 F ,014/0.35 Compatible , Bone Marrow Biopsy Needle Size 8G 4 & 6 With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 8,11,13 Gauze Usfda/Four Digit Ce Approved , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(18Fr, 2-Way) • Made From 100% Medical-Grade Silicone. • Biocompatible And Non-Reactive, Ideal For Long-Term Catheterization. • 2-Way Foley Catheter (Typically Available); • Smooth, Non-Stick Surface For Easy Insertion And Removal. • Integrated Silicone Balloon For Retention In The Bladder. • Radiopaque Stripe Throughout The Catheter Length For X-Ray Visibility. • Standard (Rounded) Tip. • Available In Sizes Ranging From: 18 Fr). • Follows International Color-Coded System To Identify French Sizes. • Large Symmetrical Drainage Eyes For Effective Urine Flow. • Latex-Free - Suitable For Patients With Latex Allergies. • Universal Funnel-Shaped Connector For Drainage Bag Attachment. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Having Maryland Jaw Sealer And Divider With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. Should Have The Manual Cutting Mechanism. And It Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Ligature Technology Have Small Jaw Tissue Sealing System For Open Procedures Vessel Sealing Instrument With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. Should Have The Manual Cutting Mechanism.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument. Wide Jaw Aperture 14.5 Mm With Shaft Rotation Of 180 Degrees ; Multifunctional Laparoscopic Device For Tissue Fusion.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Vessel Sealing Technology Instrument For Open Surgeries With Instrument Length Between 21-23Cm And Electrode Length Between 17-21Cm Having 22 Degree Curved Jaw With Contoured Tip Activation Both Through Hand Activation And Foot Activation With A Manually Controlled Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Have 36Mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Vessel Sealing Technology Have Vessel Sealing Instrument For Open Surgeries With Reusable Clamp Length Between 16-23Cm, With 12-40 Degree With Straight / Curved Jaw And Its Should Have Including 7Mm Cutting And Coag With Usfda. , Double Lumen Catheter Size- 12 Frx16 Cm Double Lumen Catheter Size- 12 Frx16 Cm (Double Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot)Size- 12 Frx16 Cm With Us Fda / Iso Ce Certified , Double Lumen Catheter Size- 12 Frx13 Cmdouble Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot Size- 12 Frx13 Cm Usfda Along With Iso Ce Certified , Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 27 Cm Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided Catheter, Pull Apart Sheath, Dialator, Tunnelling Stylet, Guide Wire J/S, With Disppenser And Injection Caps, Symmetrical Tip Retrograde And Antigrade Size- 15 Fr X 27 Cm Usfda Certification Along With Iso, Ce. , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Transperant Surgical Wound Dressing Size- 5X 5.72 Cm Tranparent Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidal Protection And Anti Microbial Property. Provide A Waterproof Sterile Barrier To External Contaminating Including Liquids, Bacteria Anf Viruses , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Proteciton And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Multi-Vent Mask Pediatric, Multi-Vent Mask Pediatric, Air Entrainment Masks, Must Be Safe, Simple Delivery Of Variable Oxygen Concentrations. Each Mask To Includes Color-Coded Diluters: Green For Low Concentration, White For Medium Concentration. Locking Ring To Secure Flow Setting. Must Include Adaptor For High Humidity Entrainment. Complete Kit With 7-Ft Oxygen Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 12-Fr Product Should Be Usfda Approved , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. , Closed Suction Catheter Has Isolated Cleaning Chamber 12 Fr. Closed Suction Catheter Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material,Catheter Has Zig-Zag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. Size 12 Fr. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 14-Fr Product Should Be Usfda Approved. , Multifocal Iol Multifocal Iol (Multifocal Iol Biconvex, Single Piece Optic Size 6 Mm, Overall 12-13 Mm Haptics Hydrophobic Single Loop Or Hydrophilic Double Loop Uv Blocking 360 Degrees Square Edge, Sterile Packing Disposable Sterile Injector For Sub 2.8 Mm Incision Power +16 To + 25 D Diffractive Multifocal Design With Near Add +3 To +4 D Iso Or Ce Approved Samples Required For Approval , Glaucoma Drainage Implant (Valved) With Silicon Tube Adult , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric , Scleral Fixiated Intraoccular Lense Single Piece Pmma: Optic6-6.5Mm, Overall13.5Mm Haptic With Hole For Suture Fixation , Central Line With Triple Lumen With Y Needle With Syringe And Guide Wire 7Fr To 8.5Fr With 15 Cm To 20 Cm Catheter With Tecoflex/ Polyurathane Material With Usfda Approved. , Post Operative Surgical Cover Dressings Hydrofiber/Foam Dressings With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm, Elastic Tape In Semi-Circular Shape With Hydrocolloid Adhesive For Extra Security Of Base Plate. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit Two- Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm)Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit One- Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm) , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. Window On Bag For Inspection 60Mm . With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic. , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. One Side Transparent For Inspection. 70Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material. Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. . Window On Bag For Inspection 60Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , Antimicrobial Transperant Provides Immediate And Continuous Antimicrobial Protection With Integrated Chlorhexidine Gluconate (Chg) Gel Pad, Proven To Reduce Crbsi And Vascular Catheter Colonization, Size 11.5Cm To 8.5Cm, Breathable Film Coating Provides A Barrier To Microbes* And External Contaminants Size 11.5Cm To 8.5Cm, , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 13X13 Cm And More , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 10X25 Cm , Polysiloxane Or Silicone Gel Sheet For Scar Management. Size 10 * 10 Cm Or 10X18cm , Polysiloxane And Silicone Gel Sheet For Scar Management Size 5 X5 Cm , Triple Layer Antimicrobal Form Dressing For Burn Wound With Silver Sulphate, Silver Content 1.2 Mg/Cm 2 With Active Release Of Silver Upto 7 Days With Soft Silicon Atraumatic Wound Contact Layer For Painless Dressing Change. Product Should Be Ce/Usfda Certified Size 20X20 Cm (45Mm) + 15% Deviation Insize Will Be Acceptable. , Triple Hydrocolloid Skin Barrier Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved 10Mm , Nasal Haemostatic Sponge Pack With Out Airway 8Cm , Nasal Haemostatic Sponge Pack With Out Airway 10Cm , Nasal Haemostatic Sponge Pack (With Airway) 8Cm , Flexomatlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To End. It Should Be Usfda/Ce/Bis/Is. , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Smsh Us Fda + Ce/ Dgci Approved· Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp - Data Scope & Cath Lab Transducer) And Iccu At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided Form Authorized Agencies , Dialyzer Size 1.3 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.4 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.6 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.8 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Padiatric Dialyzer Size 0 .6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm)Size 1/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm)Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (3/8 Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size 1 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle 20Mm Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length75- 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Tapercut Needle (Heavy) 35- 40Mm Length 75-90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle40mm Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Conventional 25Mm Length 90 Cm)Undyed Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 20Mm Length 70 Cm) Size 4/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide ) (1/2 Cir Rb Needle 40Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 40Mm Length 90 Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting Needle 22Mm Length 45 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting 16Mm Needle, Suture Length 70Cm Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm)Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 40-45Mm Length 60-70 Cm.)Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.)Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Armsize 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16Mm Needle,Length 90 Cm) Size 6/0 , Non Absorbable Surgical Suture,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb Double 8Mm Needle, Length 60 Cm)Size 7/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle, Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm Length 90 Cm) Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy Needle 40- 45Mm Length 75-100 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle Cutting Size 16-17Mm Length 70-90 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Armsize 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue Usp(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm)Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Armsize Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm)Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (L/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) Size 1 , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut 13Mm Double Needle 70Cm)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle cement concrete 13Mm Needle, Suture Length Of 70Cm) Double Arm Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Armsize 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green/ Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided White (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green / Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) 1/2 Circle Taper Cut , 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) *With 1/2 Circle Taper Cut , 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm Size 3/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone, Monofilament Sutures (1/2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm)Size 2/0 , Absorbable Surgical Sutures Polyglecaprone, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 26Mm, Suture Length 70Cm) Size 3/0 , Absorbable Surgical Sutures Monofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm)Size 4/0 , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70-90Cm)Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Reverse Cutting 40- 50 Mm Length 70- 90Cm) Size 1 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length 70Cm) Size 2/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length 70Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm/ Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/ Size 2/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/ Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cmsize 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm Size 10/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16Mm, Length 76 Cm) Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm) Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 16Mm, Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16-19Mm Length 76 Cm) Size 4/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) Size 2/0 , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 20-26M M, Suture Length 70Cm) Size 3/0 , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Taper Point, 90 Cm , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,30Mm Needle, Size 2-0, 1/2 Circle Taper Point, 90 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Reverse Cutting Os Needle, 90Cm , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,20Mm Needle, Size 3-0, 1/2 Circle Taper Point, 70 Cm , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Dyed/Undyed 37- 40Mm 1/2 Circle Reverse Cutting , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm -25 Mm Needle , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm , Polyglactin 5-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure Mp, Purest Form Of Triclosan, 26Mm Needle, Size 2-0, 3/8 Circle Cutting, 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle Taper Point, 17-20Mm Needle, Length 70Cm Size 3-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle Taper Point Rb-1, 17 Mm Needle, Length 70Cm Size 4-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/2 Circle Taper Point Rb-2, Double Needle, 13 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/8 Circle Taper Point, Bb Single Armed Needle 17 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm 1/2 Circle Taper Point , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 3-0,70 Cm,1/2 Circle Rb,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 4-0,70 Cm,1/2 Circle Rb,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 5-0,70 Cm,1/2Circle R.B.,13 Mm , Monofilament Glycomer 1 90Cm Gs-21 , Violet 37Mm 1/2 Circle Taper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Violet 37Mm 1/2 Circle Taper Pont , Non Absorbable Surgical Suture, Sterilized Surgical Needled Black Braided Silk With Needle 1/2 Circle Round Body 30 Mm Needle , Length 70 Cm Size 2-0 , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 , Silk Reel 4-0 , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle26 Mm , Polypropylene Blue Monofilament Usp 3/0,2,90 Cm,1/2 Circle Taper Point (Double Armed),26 Mm , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament Usp 5/0,1,90 Cm,1/2 Circle Taper Point (Double Armed),18 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle (Cutting) 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0,3/8 Circle C1 Taper Point Cv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,8 Mm,60 Cm , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X 36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Taper Point , Synthetic Nonabsorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm 1/2 Circle Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Violet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 1-0,90 Cm,1/2 Circle R.B.,30 Mm , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 5-0,76 Cm,3/8 Circle R.B,12 Mm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 2-0, 1/2 Circle Taperpoint, 36 Mm,100 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 4-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 3-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 5-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 26Mm Length 70Cm3-0 , Non Absorbable Surgical Suture Sterilized Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm 5-0 , Non Absorbable Polypropylene Surgical Sutures Size:6-0,3/8 Circle 175-6 Taper Point /Rc Bv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0, Compound Curve ( 1/2 & 3/8 Circle) Circle 175-6 Taper Point Blackmatte Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm , Monofilament Synthetic Absorbable Suture Poliglecaprone 25 - Undyed Ep 3-0,70 Cm,1/2 Circle Oval R.B. J.B. Needle,26 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 3-0, 3/8 Circle Reverse Cutting,Ps Prime 24 Mm,75 Cm , Gauze Than 120Cm X 9 Mtr (Jk47) , Absorbent Cotton Wool Ip 500 Gm , Cotton 200 Gm (Jk153) , Cotton Bandage 4Inch (4.0419) (10Cm X 9 Mtr ) , Cotton Bandage 6Inch (4.042) (15Cm X 9 Mtr ) , Baby Diaper Small (Pba001) , Disposable Appron / Plastic Appron , Shoe Cover (Jk201) , Disposable Needle 22No , Disposable Needle 23No , Disposable Needle 24 No , Disposable Needle 26 No , Infant Feeding Tube 6G (4.0747) , Spinal Needle With Pencil Point Tip Having Tranparent Grooved Hub And Introducer Needle Size 27G X 3.5Inch (4.1315) , Opthalmic Micro Surgical Crecent Blade , Opthalmic Micro Surgical Knife(Keratom) , Ear Buds , Medical Body Protector Premium , Pure Type 1, Triple Helical, Porous Collagen In Particle Form (Fish Origin) With Mupirocin Usp 2% W/W And Metronidazole Ip 1% W/W, Size- 10Ml , Super Oxidized Solution With Neutral Ph Containing Hypochlorous Acid (0.003%) And Sodium Hypochlorite (0.004%) For Wound Treatment In Spray Bottle Of 500Ml , Advanced Fluid Administration System With Air Stop & Prime Stop With Integrated Back Check Valve Bacterial Retention Air Vent, Transparent Spike Designed In Accordance With Iso 8536-4, Transparent Drip Chamber (Double), 15Micron Fuild Filter In The Chamber Medical Grade , Porus Resorbable Collagen (Pure Type-1) Sheet In Nylon Mesh-Dry Form (Fish Origin)-Size- 10X10cm , Non-Occulusive Wound Contact Layer Consists Of Silver Healing Matrix Made Ofp Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc), Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Lipido- Colloid Technology (Tlc) , Size-10X12cm , Pure Poly Siloxane Based Silicone Scar Management Product In Sheet Form(100% Poly Siloxane And Nylon Polyamide Mesh) -Size- 10X10cm, , G Dress 10.5*25Cm , G Dress 8.5*6.5Cm , Amorphous Hydrogel In Applipak Composing Of 2.3% Carboxymethylcellulose,20.0% Propylene Glycol & Purified Water, Promotes Rapid But Gentle Debridement Of Necrotic Tissue. Size 25Gm , Triple Chambered Nutrition(3 In One) For Periperal Iv Emlusions 1800Ml-2100Ml With 80% Olive /20% Soya Lipid,Amino Acids,Glucose & Electrolytes. Tpn 1Ltr Triple Chamber Bag Should Contain Protein 20-45 Gm/L Lipid 20-40Gm/L Glucose 80-160 Gm/L , Non-Leadradiationprotectiongloves - Bis Certified , Latex Free Disposable Pencil Point Spinal Needle 27G , 127.5 Mm With Grooved Transparent Hub With Centering Protective Plastic Sleeve, Touhy Needle With Black Eye - 18 G (1.3 X 88 Mm). Protrusion Of Spinal Needle Through The Back Eye Of The Epidural Needle. With Epidural Catheter, Filter, Loss Of Resistance Syringe And Separate Locking Device - Docking System. , Electrolysed Non-Toxic, Non-Irritant And Non-Corrosive, Ready To Use Disinfectant Solution With Neutral Ph Containing Sodium Chloride (Na Cl)- )0.023%, Sodium Hypochlorite (Naocl)- 0.005%, Hypo Chlorous Acid (Hocl)- 0.004%, Electrolysed Water- 99.97% In Jerricane Of 5 Litre
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
5.
Educational and Research Institute #11419410 Technical Bid
Tender for E-Tender Documents For Event Management (Catering Services, Accommodation, Tsr, Infrastructural Support Viz Ground Preparation Etc., Decoration And Other Items) For Opening Ceremony And Organizing Of State School Games , National School Games, Pre-Subroto Cup Cluster & State Level Football Ch Ionship, Jn Hockey Ch Ionship, Id Parade, Rd Parade, Jai Hind Bahini Programmes, Nsg Participation, National Yoga Olympiad, Conducting Coaching C , Sidhu Bhanu Gold Cup, Band Competition, Govt. School Meet, Conducting Refresher Course For Officers And Teachers, & Other Events In Kolkata And Different Districts Within The State Including Other States Of The Country And International Participation. , Erection Of Stage On Iron Structure With Floor Carpet And Flower Decoration, Back Led. 3 Side Open With Railing And Both Side Case Measuring 40 Ft X 30 Ft With Platform 3 ½ Ft Hight , Erection Of Stage On Iron Structure With Floor Carpet And Flower Decoration 3 Side Open With Riling And Both Side Case Measuring 30 Ft X 30 Ft With Platform 2½ Ft Hight , Erection Of Pandal (Hanger / Iron Structure) With Sufficient Hight Completely Rain Proof (Size 160 Ft X 50 Ft) , Two Guest Room Adjacent To The Main Stage With Soft, Table, Chair 15 Ft X 30 Ft , Erection Of Stage On Iron Structure With Floor Carpet And Flower Decoration, 3 Side Open With Riling And Both Side Case Measuring 30 Ft X 30 Ft With Platform 3 ½ Ft Hight , Erection Of Pandal On Iron Structure With Floor Carpet And Table With Cover(3Pc) Chair (30) 3 Side Open Measuring 30 Ft X 30 , Erection Of Pandal (Hanger / Iron Structure) With Sufficient Hight Completely Rain Proof (Size 120 Ft X 50 Ft) , Podium (2 Nos.) With Flower Decoration , Complete Stage Decoration (3 Nos.) , Centre Table 20 Pc With Cover & Flower Basket , Sofa Triple Size , Steel Barricade 100Ft , Vvip Thone Chairs With Centre Table , Vip Chairs With Centre Tables , Fibre Chair , Iron Flag Pole -1 Dais- ( 3 Pc) , Flag Pole With Colour Flags , Saluting Dais 6 Heights X 2 Mts. With Back Side Indian & West Bengal Map With Beautification By Flowers & Flower Tubs , Complete Set Up: Boxing Ring(6.1 M X 6.1 M) On Each Side Within The Rope Per Day. , Overhead Gates , Main Gate At Entrance , Fibre Tables With Cover , Decoration On Both Of Approach Road (100 Ft) , Decoration On Gallery Walls On Both Sides (100 Ft) , Erection Of Overhead Chala At Open Gallery Measuring 160Ft X 50Ft , Erection Of Dining Hall With Table Chair Floor Carpet Measuring 100 Ft X 50 Ft , Flex Fitting Size 10 Ft X 8 Ft (Horizontal) , Flex Fitting Size 3 Ft X 6 Ft (Vertical) , Flex Fitting Size 10 Ft X 25 Ft (Vertical) , Flex Fitting Size 6 Ft X 20 Ft (Vertical) , Complete Set Up: Wrestling Ring(20 Ft X 20 Ft), Height- 40 Inches Per Day. , Flower Tubs , Balloon (All Ground & Entry Point) Decoration At All Grounds, Entries And Exits 100 Ft , Flower Bouquets , Complete Accommodation Set (Mattress/ Toshok, Pillow With Cover And Bed Cover) , Complete Toiletry Kit In Pouch (Toothbrush, Toothpaste, Soap, Body Oil, Comb, Moisturiser, Antiseptic Cream Etc.) , Still Photography , Transportation For Participants By Bus With More Than 50 Seats (Venue/ Different Ground/ Station/ Accommodation Centre Etc.) , Transportation For Participants By Bus With Less Than 50 Seats (Venue/ Different Ground/ Station/ Accommodation Centre Etc.) , Transportation For Officials By Light Vehicles 7 Seater (Venue/ Different Ground/ Station/ Accommodation Centre Etc. , Transportation For Officials By Light Vehicle - 4 Seater (Venue/ Different Ground/ Station/ Accommodation Centre Etc. , Transportation For Officials By Suv Vehicle - 9 Seater (Venue/ Different Ground/ Station/ Accommodation Centre Etc. , Vinyle Board For March Past (1Ft X 2Ft) , Arrangement Of Roller Skating Rink (23 Mm X 46 Mm) Per Day. , Complete Ground Preparation , I-Card With Jacket & Digital Tag , Stand Fan , Tube Light & Metal/ Halogen , Accommodation Of Participants On Sharing Basis (2-4 Heads Per Room) At Kolkata & Districts , Accommodation Of Officials On Twin Sharing Basis At Kolkata & Districts , Arrangement (Accommodation, Food, Transport & Remuneration) For Referees/ Umpires/ Technical Officials For Conducting The Matches , Arrangement For Travel Cost & Remuneration For Organising Officials ,Observers,Seiectors For Conducting The Matches , Arrangement (Accommodation, Food, Transport & Wages) For Grounds Man / Ball Boy , Arrangement Of Shooting Arena For 10M Air Range, 25M And 50M Ranges (8-Lane Ranges) And Should Be Digital Score Board , Instant Digital Colour Certificate Printing (Size: A5 Of 300 Gsm) , Bio- Toilet , Security Services , Designing Mascots , Arrangement For Mascots 3 D Structure (Preparation & Installation) , Plastic Bucket (Medium Size) & Mug , Sataranchi (Cotton Make & Standard Size) , Arrangement Of Fencing Court: 14M (45.93Ft) Long And 2M (6.56 Ft) Wide For 2 Days. , Morning: Tea Biscuits , Breakfast: - Breed With Butter, Banana (2) Boiled Egg (2), Sweet/ Puri, Sabji, Sweet, Boiled Egg /Upma Sambar, Boiled Egg. Banana, Mineral Water , Lunch:- Basmoti Rice, Dal (Changeable) Sabji (Changeable), Veg Fry, Fish/Chicken/Egg, Chatni, Papad, Dohi, Mineral Water , Evening Tiffin: Cake, Paties, Tea/ Chowmin, Tea/ Egg Devil (2), Fruity, Mineral Water , Dinner:- Basmoti Rice, Dal (Changeable) Sabji (Changeable), Veg Fry, Fish/Chicken/Egg, Chatni, Papad, Salad/ Fried Rice, Chicken Kosha/Chili Chicken, Sweet & Salad, Mineral Water , Lunch For Inauguration: Fried Rice & Chicken Kosha, Water Bottle (1/2 Ltr) , Food Packets For Guest, Dignitories & Press & Others , Water 1 Ltr. , Water 500Ml. , Fruit Juice (Tetra Pack 300Ml) , Glucon -D 1 Kg. , Dettol 1 Ltr. , Absorbent Cotton 500 Gm , Bandage 1 Mtr. , First Aid Kit , Ambulance With Medicine, Stretcher And Oxygen Cylinder With Supporting Staffs , Uttorio , Vvip Uttorio , Normal Badge , Vvip Badge , Good Quality Cap With Printed Logo , Good Quality Hat With Printed , Cosco Premium Football For Competition , Net For Goal Post (Best Quality Nylon) , Cosco Football , Gold Medal Embossed With Box , Silver Medal Embossed With Box , Bronze Medal Embossed With Box , Champions Trophy , Runners Up Trophy , 2Nd Runners Up Trophy , Best Player Of The Tournament (Boot Trophy) , Best Goalkeeper (Gloves Trophy) , Man Of The Match - Final , Individual Category Trophy , Highest Scorer (Football Trophy) , Memento , Flag: Digital Printed (Size 4Ft X 6Ft) , Complete Football Kits For Final Team(Both): Jersey, Hose, Socks, Boot, Sin Guard, Abdomen Guard, Gloves For Goalkeepers, Bibs Etc.. , Complete Kit For Delegates, Sed & Dse Officials: Tracksuit (Upper& Lower) With Digital Printing ,T-Shirt & Hat With Printing, Bag, Towel , Complete Kit For Participants, Coach, Manager From Districts/ Schools /Of Contingents : Tracksuit (Upper& Lower) With Digital Printing ,T-Shirts / Jersey-Pant &Cap With Printing, Socks, Canvas Shoes, Towel, Water Bottle , Complete Kit For Council Members & Dignitaries From District Administration: Tracksuit (Upper& Lower) With Digital Printing , T-Shirts & Hat With Printing, Bag, Towel , Complete Kit For Organising Officials: Tracksuit (Upper& Lower) With Digital Printing ,T-Shirt & Hat With Printing, Bag, Towel , Complete Kit For Technical Assistants: Tracksuit (Upper& Lower) With Digital Printing ,T-Shirt & Hat With Printing, Bag, Towel , Complete Kit For Technical Officials: T-Shirt With Printing, Towel, Memento , Complete Kit For Event Assistant: Tracksuit (Upper& Lower) With Digital Printing ,T-Shirt & Hat With Printing, Duffle Bag, Towel , Complete Kit For District Offices Staff: Tracksuit (Upper& Lower) With Digital Printing ,T-Shirt & Hat With Printing, Duffle Bag, Towel , Complete Kit For School Band / Exhibition Match Football Teams : Tracksuit (Upper& Lower) With Digital Printing ,T-Shirt & Cap With Printing, Towel , Complete Kit For Volunteers: T-Shirt & Cap With Printing, Duffle Bag. , Leather Bag , Semi -Leather Bag , Duffle Bag , Procurement Of Walkie-Talkies : 5 Km Range, With Earphones, And All Other Standard Accessories (Preferably Baofeng/ Renmax Made) , Procurement Of Network Printer: Canon Made Image Runner 2060N Or Above , Arrangement For Cultural Programme For Opening Ceremony , Arrangement For Cultural Programme For Closing Ceremony , Arrangement Of Flood Light For Grounds , Led Wall 20 Ft X 20 Ft , Video Camera - High Definition , Drone , Complete Sound System With Jbl Speakers Power Backup, Podium Mike, Electrical Work, , Complete Arrangement Of Sound & Lights For Cultural Programme , Complete Arrangement Of Lights & Fans At Dining Hall , Complete Arrangement Of Wushu Court With An Elevated Platform Measuring 8M X 8M With Height Of 80Cm And Should Be Surrounded By A 2M Wide Safety Cushion And With Digital Score Board For Per Day. , Complete Arrangement Of Kurash Court Of Size 16X 16 Meters & Working Zone Of 10 X 10 Meters With Digital Score Board , Truck Suit - Local Made With Rubber Print Front Logo And Back State Name , Truck Suit -Super Poly - Reputed Brand(Shiv Naresh) & Good Quality With Rubber Print Front Logo And Back State Name , Shorts & Jersey Set - Local Made , Shorts & Jersey Reputed Brand(Track On) & Good Quality Dry Fit Net With Rubber Print Front Logo & Back Number, State Name , Shorts & Vest Good Quality , T-Shirt Reputed Brand & Good Quality With Rubber Print Front Logo And Back State Name , Hose - Nylon , Football Sin Guard , Football Boot , Football Gloves Pu , Football Kit Bag , Football Goal Net , Football Corner Stick (4 Nos.) , Football Referee Flag (2 Nos.) , Hockey Ball (6 Pcs.) Reputed Brand , Hockey Sticks Wooden Laminated Hook Type , Hockey Sticks 6% Carbon 5% Kevlar Aramid 89% G/F , Hockey Goalkeeper Gears (13 Items) , Volleyball (Synthetic/Pu/Leather Pasted) Reputed Brand , Cricket Ball (6 Pcs. Box) Best Quality Reputed Brand , Cricket Bat (Kashmir Willow) Good Quality Reputed Brand , Swimming Costume , Yoga Costume , Table Tennis Ball 40+ 3 Star/2 Star/1 Star (6 Pcs Box) Reputed Brand , Table Tennis Bat (Specification Speed 80 Spin 75 Control 95) Reputed Brand , Digital Weight Machine Reputed Brand , Water Polo Ball Reputed Brand , Height And Weight Measurement Machine , Badminton Shuttle Cock Feather (10 Pcs) Reputed Brand , Badminton Racket Reputed Brand , Badminton Net , White Canvas Shoe Reputed Brand , White Socks , Volleyball Net , Kho-Kho / Kabaddi Mat 35 Mm Stag Made Standard Size , Kho-Kho / Kabaddi Mat 25 Mm Stag Made Standard Size , Kho-Kho Mat Shoe , Magnesium Carbonate Powder For Gymnastics , Good Quality Blazer In Different Size , Luggage Bag 55Cm , Towel(50Cm X 100Cm) , Water Bottle 1 Lit.(Milton/Cello) , Umbrella , Raincoat(Upper & Lower) (Reputed Brand) , Raincoat(Women)(Reputed Brand) , Steel Almirah With Loker Facility , Garbage Pack(Big Size) , Garbage Bin(Big Size) , Shoulder Kit Bag , Shoe(Gold Star) , Judo Mattress (Size 14M X 14M) Rate Per Day Basis Including Carrying & Fitting Charges & Digital Score Board. , Kabaddi Mattress (Size 30 Mm Thikness & 13M X 10M) Rate Per Day Basis Including Carrying & Fitting Charges. , Taekwondo Mat ( Size 12M X 12M)Rate Per Day Basis Including Carrying & Fitting Charges & Digital Score Board. , Archery Equipments (Target, Finger Tab, Bow Stand Minimum Eight Set Per Day) , Chess Board, Chess Pieces And Chess Clock( 100 Sets Per Day Basis Rent) , Cctv Setup (8 No.) With Moniotor Per Day , Gymnastics Apparatus (Floor Exercise, Pommel Horse,Still Rings, Vault, Parallel Bars, Horizontal Bar, Uneven Bar, Beam) Rate Per Day Basis Including Carrying & Fitting Charges. , Remote And On Site Tsr (Technical Support & Resources) Services, Including: Technical Documentation, Score Sheets,Score Slips, Live Score Display System Support, Event Operation Assistance,Technical Coordination & Real Time Troubleshooting And Operational Support For Officials & Organizers Per Day. , End To End Remote Support For Sports Events Including Documentations & Managements And Many Other Supports. , The Scoring System Of Yoga- Registration For Athletes, Prined Score Sheet For Judges, Real-Time Judgement Moduler As Per Sgfi Guidelines, Score Monitoring System By A Chief Judge, Live Showing Of The Score In The Display, Qr Code Scanning System For Showming Scores, Printed Results Of The Events According To Norms & One-Time Travelling Cost (Up & Down).
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
West Bengal View Result →
6.
Educational and Research Institute #11408306 AOC
Bids Are invited for Providing and fixing 22.8 mm thick panels with bottom metal screen, intermediate fabric screens, and top screen in fabric magnetic finish, complete in all respects. Providing and placing NOVA make or equivalent free-standing pedestal with flat metal front of size 390 mm (W) × 435 mm (D) × 646 mm (H), comprising one drawer (1 box + 1 file) with central locking system, complete with all fittings and accessories. Providing and fixing Keyboard Platform Tray (KBPT) with integrated mouse tray, suitable for the workstation, complete in all respects. The complete workstation system shall be Greenguard (UL) certified and BIFMA LEVEL 2 certified. The manufacturer shall possess valid certifications of ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA, as applicable.The work includes transportation, loading, unloading, fixing, alignment, leveling, testing and commissioning, complete, as per approved drawings, specifications and directions of the Engineer-in-Charge , Supplying and placing in position executive main table with ERU and integrated pedestal of overall size 2350 × 2350 × 750 mm (H), comprising primary and secondary work surfaces made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998, finished with 0.4 mm thick PVC membrane pressed on top, complete with soft-closing access flap and in-built power box for cable management. The modesty panel shall be of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998, finished with 0.4 mm thick PVC membrane pressed on top.The under-structure and integrated pedestal shall be made of 25 mm thick pre-laminated twin board of E1-P2 grade, conforming to IS:12823-1990, of approved shade, with all exposed edges edge-banded with matching 2 mm thick PVC lipping. The pedestal shall be of BOX-BOX-FILE configuration, having powder-coated metal panel drawer slides of 400 mm length with 325 mm drawer extension, provided with soft-closing and anti-slam mechanism, suitable handles, and central locking system, complete in all respects. The product shall be GREENGUARD (UL) certified, Indoor Advantage GOLD and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications. The item includes transportation, loading, unloading, fixing, alignment and making functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position back unit of overall size 2350 × 500 × 1800 mm (H), complete in all respects, having top panel made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823-1990, with all exposed edges edge-banded with matching 2 mm thick PVC lipping, sliding door storage unit with body panels including sides, bottom, back and shelves made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick matching PVC edge banding, shutters made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, provided with soft-closing and anti-slam mechanism, suitable handles and locking arrangement, display/storage unit made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick PVC lipping for sides, back and shelves, doors made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, and top panel of display unit also made of 25 mm thick MDF finished similarly, the complete unit being GREENGUARD (UL), Indoor Advantage GOLD and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position high back executive chair, complete in all respects, having cushioned seat made of injection-moulded plastic outer and inner, inner upholstered in pure leather with moulded High Resilience (HR) polyurethane foam of density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf at 25% compression, cushioned back made of PU foam with in-situ moulded M.S. E.R.W. round tube of size 1.9 ± 0.03 cm dia × 0.16 ± 0.0128 cm thick, upholstered in pure leather, seat size 47.6 cm (W) × 49.2 cm (D) and back size 47.5 cm (W) × 77.0 cm (H), PU moulded armrest tops upholstered in pure leather mounted on drop-lift adjustable M.S. E.R.W tubular arm supports of size 3.81 ± 0.03 cm × 0.2 ± 0.01 cm thick with chrome-plated finish, height adjustable up to 6.5 ± 0.5 cm in five steps, provided with active bio-synchro mechanism having 360° revolving, front-pivot tilt with continuous lumbar support, tilt tension adjustment operable in seating position, five-position tilt limiter and seat/back tilting ratio of 1:2, mechanism housing made of HPDC aluminium black powder-coated, provided with seat depth adjustment through integrated sliding mechanism with adjustment range of 6.0 ± 0.5 cm, adjustable back support through up/down mechanism housed in plastic T-spine with adjustment range of 7.42 ± 0.5 cm, pneumatic height adjustment with stroke of 10.0 ± 0.3 cm, pedestal made of high-pressure die-cast polished aluminium fitted with five twin-wheel castors of injection-moulded black polypropylene, pedestal pitch-centre dia 65.0 ± 0.5 cm (75.0 ± 1.0 cm with castors), overall seat height 44.5 to 54.5 cm, overall height 114.0 to 131.5 cm and overall width and depth 76.1 cm each, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position visitor chair, complete in all respects, having cushioned seat made of injection-moulded plastic outer and inner, inner upholstered in pure leather with moulded High Resilience (HR) polyurethane foam of density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf at 25% compression, cushioned back made of PU foam with in-situ moulded M.S. E.R.W. round tube of size 1.9 ± 0.03 cm dia × 0.16 ± 0.0128 cm thick, upholstered in pure leather, seat size 47.6 cm (W) × 49.2 cm (D) and back size 46.5 cm (W) × 59.5 cm (H), provided with cantilever type tubular frame made of SS-202 tube of size Ø 2.54 ± 0.03 cm × 0.02 ± 0.016 cm thick, back connected to frame through chrome-plated high-pressure die-cast connector, overall seat height 46.2 cm, overall height 98.2 cm, overall width 60.9 cm and depth 64.7 cm, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Supplying and placing in position main table of overall size 1800 × 900 × 750 mm (H), complete in all respects, having work surface made of a combination of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, and 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823-1990, with all exposed edges edge-banded with matching 2 mm thick PVC lipping, provided with soft-closing access flap and in-built power box on work surface for wire management, modesty panel made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, under-structure made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick matching PVC lipping, integrated pedestal made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick PVC edge banding, drawer fronts made of 25 mm thick MDF one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, pedestal of BOX-BOX-FILE configuration using powder-coated metal panel drawer slides of 400 mm length with 325 mm drawer extension, provided with soft-closing and anti-slam mechanism, suitable handles and locking arrangement for security, the product being GREENGUARD (UL) certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position mid back chair, complete in all respects, having seat made of 1.5 ± 0.1 cm thick hot-pressed plywood upholstered with fabric upholstery covers and moulded polyurethane foam, with extra thick foam at the front edge for comfort to the popliteal area, back made of injection-moulded glass-filled polypropylene upholstered with mesh fabric and provided with adjustable lumbar support made of injection-moulded polypropylene with adjustment range of 5.0 ± 0.1 cm, seat size 53.5 cm (W) × 51.0 cm (D) and mesh back size 51.0 cm (W) × 70.0 cm (H), seat foam of High Resilience (HR) polyurethane moulded with density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 at 25% compression, provided with adjustable armrests having up-down adjustment in six steps (7.2 ± 0.5 cm range) with armrest top PU-moulded over glass-filled nylon insert and mounted on armrest structure made of glass-filled nylon, provided with centre tilt synchro mechanism with multi-lock having 360° revolving, three-position locking with anti-shock mechanism and tilt tension adjustment, pneumatic height adjustment with stroke of 9.5 ± 0.3 cm, pedestal assembly made of injection-moulded glass-filled nylon fitted with five twin-wheel castors, pedestal pitch-centre diameter 66.1 ± 0.5 cm (76.1 ± 1.0 cm with castors), twin-wheel castors injection-moulded in black nylon, overall width 76.1 cm, depth 76.1 cm, height 101.5 to 111.0 cm and seat height 44.5 to 54.0 cm, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position visitor chair, complete in all respects, having single shell seat and back made of 1.2 ± 0.1 cm thick hot-pressed plywood, upholstered with moulded polyurethane foam on top and backing foam on rear side, finished with knitted fabric or leatherette upholstery, with extra thick foam at the front edge for comfort to the popliteal area, High Resilience (HR) polyurethane foam for seat and back moulded with density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 at 25% compression, provided with cantilever type visitor tubular frame made of M.S. E.R.W. tube of size Ø 2.54 ± 0.03 cm × 0.2 ± 0.016 cm thickness, powder coated finish of DFT 40–60 micron, armrest tops moulded from polyurethane (PU) with metal insert and mounted on tubular frame, overall width 60.5 cm, depth 65.0 cm, height 86.5 cm and seat height 46.0 cm, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position ergonomic task chair, complete in all respects, having cushioned seat assembly with seat base moulded in glass-filled poly-amide, moulded polyurethane foam upholstered with high-stretch knitted polyester fabric, back injection-moulded in glass-filled polypropylene upholstered with mesh fabric and provided with adjustable lumbar support made of injection-moulded polypropylene with adjustment range of 3.0 ± 0.1 cm, mesh back size 45.5 cm (W) × 54.0 cm (H) and seat size 48.5 cm (W) × 49.0 cm (D), High Resilience (HR) polyurethane foam used in seat and back cushions moulded with minimum density 48 kg/m³ and hardness load 15 ± 2 kgf as per IS:7888 at 25% compression, seat and back firmly connected to base frame and cantilevered to allow multi-dimensional movement with impact cushioning and synchronized seat-back motion during posture changes, back-spine structure comprising “S” shaped spines and spine connector moulded in high-strength glass-filled poly-amide, provided with variable tilt angle recline adjustable through three-position tilt limit feature inbuilt in seat base with user-weight dependent return force, armrest assembly consisting of armrest housing sliding over armrest structure both moulded in glass-filled poly-amide, with button-operated height adjustment of 6.6 ± 0.5 cm, armrest top of integral skin PU moulded over plastic inner moulded in glass-filled poly-amide, pneumatic gas-lift height adjustment with stroke of 9.2 ± 0.3 cm, pedestal made of injection-moulded glass-filled poly-amide having pitch-centre diameter 66.0 ± 0.5 cm (76.0 ± 1.0 cm with castors), fitted with five twin-wheel castors injection-moulded in poly-amide of 5.0 ± 0.1 cm wheel diameter, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position high back chair, complete in all respects, having cushioned seat assembly with seat base moulded in glass-filled poly-amide, moulded polyurethane foam upholstered with high-stretch knitted polyester fabric, cushioned back assembly with back inner moulded in polypropylene, in-situ moulded with polyurethane foam and upholstered with high-stretch knitted polyester fabric, seat size 48.5 cm (W) × 47.0 cm (D) and back size 45.5 cm (W) × 53.0 cm (H), High Resilience (HR) polyurethane foam used in seat and back cushions moulded with minimum density 48 kg/m³ and hardness load 15 ± 2 kgf as per IS:7888 at 25% compression, seat and back firmly connected to base frame and cantilevered to provide multi-dimensional movement, impact cushioning while sitting and synchronized seat-back movement during posture changes, back-spine structure comprising “S” shaped spines and spine connector moulded in high-strength glass-filled poly-amide, provided with variable tilt angle recline adjustable through three-position tilt limit feature inbuilt in seat base with user-weight dependent return force, adjustable armrests comprising armrest housing sliding over armrest structure both moulded in glass-filled poly-amide with button-operated height adjustment of 6.6 ± 0.5 cm, armrest top of integral skin PU moulded over plastic inner moulded in glass-filled poly-amide, pneumatic gas-lift height adjustment with stroke of 9.2 ± 0.3 cm, pedestal assembly made of injection-moulded glass-filled poly-amide having pitch-centre diameter 66.0 ± 0.5 cm (76.0 ± 1.0 cm with castors), fitted with five twin-wheel castors injection-moulded in poly-amide of 5.0 ± 0.1 cm wheel diameter, overall seat height 44.5 to 53.8 cm, overall height 99.5 to 108.8 cm and overall width and depth 76.0 cm each, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Supplying and placing in position 24-seater conference table (MINGLE MODULAR PLT), complete in all respects, having worksurface made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, with all exposed edges edge-banded with 2 mm thick matching PVC lipping, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, aluminium alloy 63400-WP profiles used for connecting panels together with knock-down construction, provided with plastic ABS access flap for easy access to wires and cables, worktop available in various modular shapes, modesty panel made of 18 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823:1990, edge-banded with 2 mm thick PVC lipping, powder-coated accent metal strip below work surface made of 0.8 mm CRCA as per IS:513, epoxy polyester powder coated (DFT 40–60 microns), wire management panels made of 0.8 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40–60 microns), provision to mount Anchor Roma 6 module plate below worktop, and cutouts on top with two-piece injection-moulded plastic component for pulling audio/video cables and connecting devices to power sockets below worktop, the product being GREENGUARD (UL), Indoor Advantage GOLD, GRIHA, SVAGRIHA and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position 16-seater conference table (MINGLE MODULAR PLT), complete in all respects, having worksurface made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, with all exposed edges edge-banded with 2 mm thick matching PVC lipping, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, aluminium alloy 63400-WP profiles used for connecting panels together with knock-down construction, provided with plastic ABS access flap for easy access to wires and cables, worktop available in various modular shapes, modesty panel made of 18 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, powder-coated accent metal strip below work surface made of 0.8 mm CRCA as per IS:513, epoxy polyester powder coated (DFT 40–60 microns), wire management panels made of 0.8 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40–60 microns), provision to mount Anchor Roma 6 module plate below worktop, and cutouts on top with two-piece injection-moulded plastic component for pulling audio/video cables and connecting devices to power sockets below worktop, the product being GREENGUARD (UL), Indoor Advantage GOLD, GRIHA, SVAGRIHA and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge , Supplying and placing in position 12-seater conference table (MINGLE MODULAR PLT), complete in all respects, having worksurface made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, with all exposed edges edge-banded with 2 mm thick matching PVC lipping, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, aluminium alloy 63400-WP profiles used for connecting panels together with knock-down construction, provided with plastic ABS access flap for easy access to wires and cables, worktop available in various modular shapes, modesty panel made of 18 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, powder-coated accent metal strip below work surface made of 0.8 mm CRCA as per IS:513, epoxy polyester powder coated (DFT 40–60 microns), wire management panels made of 0.8 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40–60 microns), provision to mount Anchor Roma 6 module plate below worktop, and cutouts on top with two-piece injection-moulded plastic component for pulling audio/video cables and connecting devices to power sockets below worktop, the product being GREENGUARD (UL), Indoor Advantage GOLD, GRIHA, SVAGRIHA and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supply and fixing wooden storage unit of size 1200 × 450 × 1219 mm (H), complete in all respects, comprising low to medium height HDU, with body made of 18 mm pre-laminated board (PLB) with all edges sealed with 0.8 mm thick PVC edgeband, back panel made of 9 mm white pre-laminated board (PLT), complete ready-to-assemble construction using suitable knock-down (KD) fittings, shelves and separator panels (where provided) made of 18 mm white PLT with 0.8 mm edge banding, bottom shelf fixed and other shelves with one-step adjustable positions for optimized storage, door panels made of 18 mm PLB with 2 mm edge banding on all edges, fitted with flush plastic handle vertically at center, doors mounted on suitable hinges with HDU fitted with adjustable height fittings, three-point locking arrangement provided, and all units fitted with 6 mm levelers at the bottom for proper leveling, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position one-seater sofa, complete in all respects, having seat foam made of PU foam with density 28 ± 2 kg/m³ and an additional top layer of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, back foam made of PU foam with density 28 ± 2 kg/m³ and two additional top layers of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, understructure made of 1.2 ± 0.1 cm thick hot-pressed plywood (moisture-resistant and termite-proof as per IS:303) and pinewood cross-sections free from major knots and surface defects, zigzag spring assembly comprising 6 nos. per seat with 3.8 mm dia mounted over understructure for cushioning, leg assembly welded in stainless steel (grade SS 202) tube and plate with plastic end caps, overall dimensions width 86.0 cm, depth 90.5 cm, height 85.5 cm, seat height 45.0 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position two-seater sofa, complete in all respects, having seat foam made of PU foam with density 28 ± 2 kg/m³ and an additional top layer of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, back foam made of PU foam with density 28 ± 2 kg/m³ and two additional top layers of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, understructure made of 1.2 ± 0.1 cm thick hot-pressed plywood (moisture-resistant and termite-proof as per IS:303) and pinewood cross-sections free from major knots and surface defects, zigzag spring assembly comprising 6 nos. per seat with 3.8 mm dia mounted over understructure for cushioning, leg assembly welded in stainless steel (grade SS 202) tube and plate with plastic end caps, overall dimensions width 172.0 cm, depth 90.5 cm, height 85.5 cm, seat height 45.0 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position three-seater sofa, complete in all respects, having seat foam made of PU foam with density 28 ± 2 kg/m³ and an additional top layer of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, back foam made of PU foam with density 28 ± 2 kg/m³ and two additional top layers of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, understructure made of 1.2 ± 0.1 cm thick hot-pressed plywood (moisture-resistant and termite-proof as per IS:303) and pinewood cross-sections free from major knots and surface defects, zigzag spring assembly comprising 6 nos. per seat with 3.8 mm dia mounted over understructure for cushioning, leg assembly welded in stainless steel (grade SS 202) tube and plate with plastic end caps, overall dimensions width 206.0 cm, depth 90.5 cm, height 85.5 cm, seat height 45.0 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position three-seater sofa, complete in all respects, overall dimensions width 176.5 cm, depth 81.5 cm, height 83.5 cm, upholstered in PVC material of 1 mm thickness in coffee brown shade, frame made of pine wood with moisture content 10–12%, plywood used in frame 12 mm and 18 mm thick, seat cushion made of slab stock foam with density 32 kg/m³, back and armrest cushions filled with conjugated hollow fiber (recron), webbing made of nylon, legs made of PVC, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position coffee table, complete in all respects, overall size 1202 × 594 × 411 mm (W × D × H), body made of 18 mm pre-laminated particle board (PLB) with all exposed edges edge-banded with 2 mm thick PVC, middle horizontal panel providing storage area, four nylon bushes provided, top comprising 8 mm thick toughened glass glued with UV plate and PLT panel, glass fixed to side vertical panels, PLT top panel hinged to side vertical panels to open upwards, knock-down construction, finish in WENGE shade with suede finish on PLT panels and Sunray finish on UV-glued plates under glass, hardware comprising dowels for knock-down assembly with high-quality standard hardware including screws, door hinges, bumpers, expanding sockets, nylon bushes, etc., including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position coffee table, complete in all respects, overall size 1100 × 600 × 456 mm (L × W × H), table-top made of 8 mm thick toughened clear glass, body made of 18 mm thick pre-laminated board (PLT) in Cincinnati Walnut finish, configuration comprising shelf storage and display space, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position corner table, complete in all respects, overall size 450 × 450 × 606 mm (L × W × H), table-top made of 6 mm thick toughened clear glass, body made of 18 mm thick pre-laminated board (PLT) in Cincinnati Walnut finish, configuration comprising shelf storage and display space, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position corner table, complete in all respects, overall dimensions 60 × 45 × 60 cm (W × H × D), made of 18 mm thick pre-laminated particle board (PLB) with 10 mm thick toughened glass top, construction knock-down type, finish comprising MIP lamination in Black Ink shade with matching matt PVC lipping and digitally printed glass matching the PLB finish, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position main table of overall size 1220 × 600 × 750 mm (L × W × H), complete in all respects, work surface made of 25 mm thick pre-laminated board of E1-P2 grade of approved shade conforming to IS:12823:1990, all exposed edges edge-banded with 2 mm thick PVC lipping, access flap provided on work surface for wire management, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick PVC lipping, cube legs fabricated from MS ERW tube 50 × 25 × 1.2 mm and 40 × 40 × 1.2 mm as per IS:7138, top of legs welded with 3 mm thick HR steel support brackets (IS:2062) for fixing worktop, welded structure coated with 50 micron epoxy polyester, base fitted with plastic cap with M8 molded insert and straight M8 leveler adjustable up to 50 mm, cross members made from 50 × 25 × 1.2 mm ERW tube (IS:7138), coated with 50 micron epoxy polyester, assembled by friction-fit PDC joinery and grub screws, two cross members per table, power box made of 0.8 mm thick CRCA (IS:513) with 8-module Anchor Roma cutout fixed along the depth of worktop, soft-closing access flap made of aluminum extrusion with PDC parts in aluminum alloy and plastic parts in Nylon 6, wire brush with nylon bristles for cable management, the product being GREENGUARD (UL) certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing and placing in position high-back (HB) chair, complete in all respects, with cushioned seat made of injection-molded plastic outer and inner, inner upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression; cushioned back made of PU foam with in-situ molded MS ERW round tube 1.9 ± 0.03 cm × 0.16 ± 0.0128 cm, upholstered with leatherette, seat size 47.0 × 48.0 cm (W × D), high-back size 47.7 × 76.4 cm (W × H); armrest top moulded in PU, mounted on drop-lift adjustable tubular support of 3.81 ± 0.03 cm × 0.2 ± 0.01 cm MS ERW tube with chrome finish, height adjustable up to 6.5 ± 0.5 cm in 5 steps; active bio-synchro mechanism with 360° revolving type, front-pivot tilt with feet resting on ground, continuous lumbar support, tilt tension adjustable in seating position, 5-position tilt limiter, seat/back tilting ratio 1:2, mechanism housing of HPDC aluminium black powder coated, seat depth adjustable 6.0 ± 0.5 cm, adjustable back support connected to Up/Down mechanism housed in plastic T-spine adjustable 7.42 ± 0.5 cm, pneumatic height adjustment stroke 10.0 ± 0.3 cm, pedestal of high-pressure die-cast polished aluminium fitted with 5 twin-wheel castors, pedestal pitch-center diameter 65.0 ± 0.5 cm (75.0 ± 1.0 cm with castors), twin-wheel castors injection-moulded black PP, wheel diameter 6.0 ± 0.1 cm, overall chair dimensions: seat height 43.1–53.1 cm, height 112.7–130.2 cm, width & depth 76.1 × 76.1 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, certified Greenguard (UL) and BIFMA LEVEL 2, manufacturer holding ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. Total Quantity : 172
Contract Date: Ref. Documents Contract Value : 42.59 Lakh
Government Departments No of Bidders 5
8.
Housing Urban and Rular Development #11356315 AOC
supply installation testing and commissioning Of Cctv Surveillance System At Vip Inspection Bungalow And Its Adjacent Buildings And Their Related Compound To Be Executed By Central Mechanical Division Under Udma. Dept.- 1 SITC of Infrared 4Mp/1080p Security Camera, White High quality imaging with 4 MP resolution Support Human and Vehicle Detection Smart Hybrid Light: advanced technology with long range Built-in microphone for real-time audio security Water and dust resistant (IP67) . Support on-board storage.Make: HIKVISION/CP Plus/Equivalent reputed make 2 SITC of IP 4MP Dome Network H.265+ CCTV Hikvision 3K/5MP Dual Light Audio Camera [Built-in Mic, HD Video Output, HDTVI Technology), High quality imaging with 3K, 2960 × 1665 resolution, EXIR- IR Range Up to 30m, DC 12V (3.3W Max), Up to 20 m white light distance for bright night imaging, Switchable ,Plastic, D-WDR, 2D-DNR, Motion Detection, IP67 Water and Dust Proof (Operating Conditions -40 °C to 60 °C), Day/Night Vision.Make: HIKVISION/CP Plus/Equivalent reputed make 3 SITC of16+2 Port Gigabit Unmanaged PoE Switch | DGS-F1018P-E 16-1000Mbps 250m PoE Switch + 2SFP Uplink in OffersMake: D-Link/Net Gear/Equivalent reputed make 4 SITC of 8+2 Port Unmanaged PoE Switch | DES- 8+2 100Mbps 250m PoE Switch in OffersMake: D-Link/Net Gear/Equivalent reputed make 5 SITC of 16 channel NVR with [2 SATA port] for IP CCTV Cameras up to 4K resolution with HDMI and VGA Output, Motion detection, H.265 Hik-Connect 4K NVRHDMI, BLACKMake: HIKVISION/CP Plus/Equivalent reputed make 6 SITC of M Series DS-7732NI-M4 32-Channel 8K NVR Hikvision 16 Channel 4K NVR with 2 SATA Port || 1 HDMI And 1 VGA Interfaces Video Output Up to 12 MP IP cameras can be connect with this NVR H.265+/H.265/H.264+/H.264 Video Formats 2 SATA interfaces for HDD connection (up to 6 TB capacity per HDD) USEWELL RJ 45 Connectors included.Make: HIKVISION/CP Plus/Equivalent reputed make 7 SITC of 6 TB Surveillance Internal Hard Drive HDD – 3.5 Inch Security Camera System with Drive Health Management, with 3 yr Rescue Data Recovery ServicesMake: Seagate/Skyhawk/Equivalent reputed make 8 Supply and fitting ,fixing of Cat 6 Networking Cable 305 Mtr. BundleMake: Any reputed make 9 150 Meter Heavy Duty Outdoor Cat6 Cable Weatherproof/UV Resistant 10000mbps Ethernet Cable Suitable for Direct Burial Installations Ethernet Patch LAN Cable,Internet cable Network Cord Black 10 Server Rack 6U Combo Wall Mounted Rack with 6 Power Socket & Cable - Lock & Keys - Tray (1 No) - 1 Cooling Fan and Adjustable Shelf 11 2U 19”Bottom Openable NVR This 6U DVR rack is made from a dominant quality, high gauge sheet metal(iron) and powder coating process. The material we use for this rack is rustproof and Long lasting. You Can apply this 6U DVR rack for your CCTV DVR/NVR/WIFI Routers and other equipments to keep it safe, dust free and neat. 12 SITC of 80 cm (32 inches) HD Smart LED TV Make: Samsung/Equivalent reputed make 13 Supply & fixing HDMI Cable v2.0 with Ethernet, 3D/4K@60Hz Ultra HD Resolution, 10 Mtr, 18 GBPS Transmission Speed, High Speed, Compatible with all HDMI Devices Laptop Desktop TV Set-top Box Gaming ConsoleMake: Honeywell/Equivalent reputed make 14 Supply & fixing of HDPE pipe 25 mm dia ISI standard. 15 Supply & fixing of Camera fixture made with PVC Box
Contract Date: Dec 15, 2025 Contract Value : 6.47 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
9.
Youth Affairs and Sports and Culture #11323145 Technical Bid
Tender For Purchase Of Biomechanical Equipments , Nord Board , It Should Be Portable And Should Have 2 Load Cell Sensors Per Unit With Easy To Attach Hooks Pivoting 360 Degrees Joint Improving Sensor Accuracy It Should Have Knee Position Indicator For Replication Of Test Position In Each Time. Should Have Sample Rate Per Sensor: Upto 400Hz, Capacity Per Sensor: 100 Kg/980-1000N Safe Over Load Per Sensor: 150Kg/1500N, Max Over Load Per Sensor: 200Kg/ 2000N, Resolution: 1N And Sensitivity: 22.0+/-Mv/V. Should Have Rechargeable Battery & Battery Life Should Be100 Active Hours Approx. Should Have Working Temperature Range 5-40®C. (All Weather Proof) Latest Upgradable Software Should Have Both Wired & Wireless Connectivity Connectivity Through Usb (Wired) Bluetooth Low Energy (Ble) For Ipad & Iphone I.E. (Wireless Connectivity) Should Provide 4 Years Warranty On Hardware, Should Be Provided With Latest Upgradable Software And Free Software Updates. Should Have Software Available In Mobile & Laptop (Desktop) Application With Cloud Analytics Platform Applications. Should Have Ability To Collect Data Both Local I.E. Laptop And On Ios Devices. Local Software:- For Data Collection & Data Analysis Locally. Cloud Software:- For Athlete Data Management And Analysis. Local (Desktop /Laptop) Software Should Be Compatible With Windows 10 Desktop Application Ios 13 Or Later Application (Ipad & Iphone). Should Have Ability To Collect Data Of Over 10000 Athletes Or More To Choose With Simple Name Search / Grouping Them. Cloud Analytics Platform For Analysis. Software (Application) Must Give Real Time Feedback Of Testing. License Must Be Valid For 4Years. Cloud Software: - Should Automatically Sync All Data Collected On Local Mobile And Laptop Application When Connected To Internet. O Should Have A Dashboard To See Overview Of Organizations Athletes Data And Different Tiles (Data Indicators) To See Athletes Within And Outside Threshold Zones. Report Section:- Should Have Port Section To Able To Compare Different Groups/Athletes On Longitudinal Data. Should Have Ability To Compare Same Athletes Data Over The Period. Athletes Profile:- Should Have Functionality To Enter Anthropometry (I.E. Upper Body & Lower Body Measurement). Athletes Profile Should Be Auto Sync To Local Application And Flexibility To Move Across Different Groups Or Teams With In Organization And Functionality To Pick Any Athlete From Large Pool (1000 Or More Athlete). • Should Be Able To Setup Different Access To Different People I.E. To Physiotherapist, Sports Scientist And S&C Trainer Within The Organization To Secure Data Access. Api Integration:- Should Have Open-Source Api Code For Integration Into Athlete Management System To Integrate In Ams System. Should Have Software License Valid For 4Years. Wi-Fi Tablet 64Gb, Space Grey-1Year Warranty (As Provided By Oem) - Service By Customer Service Of Oem Only.Hsn:8471. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Electromyography (Open) , The System Should Be Supplied With Minimum 16 High Speed Wireless Emg Channel With Built In Imu Sensor. Should Have Analog+ Digital Base Station • Should Have Analogy Output Option To Facilitate Integration With Third Party Hardware And Software Sensor Should Have Fixed Inter Sensor Delay Of 0.5 Milliseconds Or Less Sensors Should Have Fixed Spacing Between Electrodes Preferably Less Than 15 Mm To Avoid Motion Artifacts And Cross-Talk Sensor Contacts Should Be Made Up Of A Metal For Better Contact And Better-Quality Signal Should Be Supplied With A Charging/Transmitting Station That Communicates With Sensors To Get Information On Their Charging, Recording And Signal Strength Sensors, Sensor Skin Interface, Cable, Power Adapter And Accessories Sensors Facilitate Emg And Imu Measurements Emg Data Analysis Software For Stand-Alone Usage With Live Recording Of At Least 32 Channels And Analysis For Both Online And Offline Modes. Trigger Module Package Analog Adapter With Cable For Dynamometer Integration. • Should Have Option For Real Time Data Streaming To Computational Softwares Such As Mat Lab. Mobile Emg Suite For Outdoor Applications Technical Support For The Lifetime Or At Least For A Period Of 05 Years. The System Should Be Supplied With Sensor Docking Unit And Charging System The System Should Be Supplied With Double Sided Adhesive Stickers (At Least 5000) And Double-Sided Adhesive Tape Rolls (At Least 20). The System Should Be Supplied With At Least 2000 Hz Of Sampling Rate Or More Per Sensor. The System Should Have A Baseline Noise < 1 ?V Or Better. The Emg System Should Have +20,000 ? Vemg Input Range Or Better. The System Should Have Software Controlled Digital Filtering, The System Should Have Shielded Cables For Minimal Artifact. The Software Should Allow Video Recording During Emg Data Recording Should Have At Least 8 Hours Of Battery Backup • Should Have Wireless Working Range Of At Least 40M Or More To Capture Data During Various Sport Specific Movements, Should Be Configurable To 32 Channels In Future. The Emg System Should Be Integrated With 3D Motion Analysis, Force Plate, Isokinetic Dynamometer, Instrumented Treadmill, Imu, Eye Tracking, Video Analysis Etc. The Necessary Third-Party Hardware/ Software Should Be Supplied By The Seller For Integration Of Emg With Other Systems. Laptop I7 (Latest Generation) With 32Gb Ram Or More, 2Tb Ssd, At Least 15.6-Inch Screen And Laser Printer With Copy/Scan/Print To Generate And View Report And Additionally A 32-Inch Monitor For Dual Display. Usfda, Iso & Euiec Certificates Or Equivalent. Installation At The Institute And Training To The Users By Experts Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Timing Gates (Open) , It Should Be A Wireless Speed Gate With 12 Gates And Provision For Increasing Gates Up To 15 Gates/Splits Or More With Split Distance Fully Customizable To Perform Variety Of Testing (Can Have Splits At 1 Meter Or 10 Meters Or Customized Distance). It Should Be Photocell & Reflector System Only (Light Or Laser Based) Considering Flexibility It Offers To Use Variety Of Testing Protocols With Visual Cue (Light System Provide A Cue To The Athlete To Change Direction) I.E. Single Or Dual Feedback Functions For Athletes. It Should Have An Accuracy Of Minimum 1 Hundredth Of A Second (1/1000Th Of A Second) Or Beyond, With A System To Eliminate Errors Caused By Hands, Feet And Other Body Parts, Equipment (To Provide Most Accurate Data) Must Have Error Correction Processing (Ecp) Inside The Timing Unit. Wireless Range: - Should Be Able To Control Gates Wirelessly With A Range Up To 180-200 Meters. It Should Have Functionalities To Provide 6 Options When Using Different Accessories A. Auto Beam Break B. In-Beam C. Reactive D. Start Pad E. Vibration (Reaction Time Measures) F. Rfid Various Accessories Should Be Integrated With Timing Gates Thus Providing Various Testing Possibilities Of Athletes. It Should Integrate With A Jump Mat (Accessories) For Plyometric Training And Explosive Power Measurement With Multiple Jump Testing Option On Jump Mats. Tests & Drills To Be Measured System Must Be Able To Measure- I. Linear (Straight Line Sprints), Shuttles With Customized Split Distance. Ii. Yoyo, Beep Tests (With Custom Customized Time Interval For Endurance Testing) Iii. Planned, Unplanned Change Of Direction For Agility Testing. Iv. Multiple Reactive Movements. V. Reaction Time Measure For Starting Blocks Any Customized Tests/ Drill With All 6 Or More Gates And No Restrictions On Number Of Customized Drills To Provide More Flexibility In Testing. • Mobile/Tablet Applications & Web Application: I. System Should Be Controlled By And Operated By Tablet/Laptop/Smartphone (Mobile Applications: -Should Have Both Ios & Android Mandatory Considering Large Android Phone User Base In India Along With Ios Application) And Ii. Must Have A Cloud Web Application Platform For Tracking Performance Variables Of 1000 Or More Athletes At One Go For Various Testing. Utility Of Mobile Applications: - I. Flexibility To Perform Test: -Mobile/Tablet Applications Should Have Functionality To - A. Pick Any Athlete From Large Pool (1000 Or More Athlete) B. Pick Any Drill Or Test To Be Conducted And Ability To Customize A Test With All 4 Or More Gates. C. To Visually Display Gates On Mobile Screen To Understand How To Perform A Test/Drill. Application To Automatically Detect Setup Of Gates. Ii. It Should Provide Real Time Data Of Performance, Reaction Time, Speed, And Agility. Iii.Single Or Multiple User With Authorized Access Control- Only Authorized Single Or Multiple Users Admins Should Have Access To Operate Application For Data Security And Data Access. Should Automatically Send Data To The Cloud Application Once Connected To Internet. Software License To Be Valid For 3 Years. Utility Of Web Application: - Functionality Of Web Application: - I. Automatically Populate Data Collected By Mobile Applications. Ii. Should Be Able To Compare Single Athlete Data Historically From Different Trials Or Compare Various Athletes For A Test Or A Drill Over Any Time Period. Iii. Should Be Able To Manage Athletes (By Creating Sports Specific Teams) Iv. Should Be Able To Download Data In Pdf, Excel And Ability To Customize These Reports V. Software License To Be Valid For 3 Years. Integration With 3Rd Party Ams System: -Software Should Have Functionality To Integrate Ams In Near Future Automatically, A Software Must Have Api Available For Seam Less Integration Of All/ Selected Data Of Speed Gates Automatically With Number Of World Leading Ams Systems And This Must Be Automated With Few Clicks Only. Rechargeable Battery Based Systems Should Have At Least 8 Hours Backup Or More. The System Should Be Robust Enough To Be Used In Various Weather Conditions. Should Have Height Adjustable Tripod Stands To Accommodate Various Sports Activities And Test Protocols. Should Provide One (1) Ipad Of Desired Specification To Run The Application (With Minimum 1 Year Warranty) Warranty For 2 Years. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Kinematic Analysis System (Open) , . Marker-Based And Markerless (Ai Based) Biomechanical System For Two-Dimensional (2D) Analysis Of Gait Analysis Including Walking And Running Activities, Posture And Other Sports Activities. 2. Biomechanical Motion Analysis Software (Pre-Installed In Computer) Within Built Modules For Standing & Sitting Posture Analysis, Walking Gait Analysis & Running Gait Analysis, Compatible With A Suitable Operating System. 3. It Should Allow Measurement Of Joint Angles & Other Data From Sports Specific Activities Like Jump, Squat, Golf, Tennis Etc. 4. It Should Also Have Features For Marker-Less Assessment Of Functional Activities Like Squats And Other Range Of Motions Of The Body During Various Activities. 5. It Should Be Able To Analyze The Anterior, Posterior, Left & Right Lateral Views Of The Subject And Provide The Following Parameters: (A) Walking Gait Analysis: Rear Foot Eversion/Inversion, Lateral Pelvic Drop, Knee Flexion/Extension, Hip Flexion / Extension, Ankle Plantar /Dorsiflexion, Knee Ab /Adduction, Stance Phase % - Swing Phase %, Step Length, Stride Length, Gait Velocity Etc. Data To Be Measured For Both Left And Right Extremities (B) Running Gait Analysis: Rear-Foot Eversion/Inversion, Lateral Pelvic Drop, Trunk Side Bending, Crossover Gait, Knee Flexion, Leg Inclination Angle, Knee Toe-Alignment, Hip Extension, Ankle Plantar Flexion, Net Vertical Oscillation Of Center Of Mass, Knee Ab /Adduction, Ground Contact Time Etc.. Data To Be Measured For Both Left And Right Extremities. (C) Posture Analysis: Major Postural Deviations Like Rear-Foot Eversion /Inversion, Forward Head Posture, Shoulder Protraction, Genu Recurvate, Lateral Head Tilt, Shoulder Level, Lateral Pelvic Drop, Lateral Trunk Sway, Q Angle (D) Sitting Posture Angle: Viewing Angle, Viewing Distance, Forward Head Angle, Elbow Flexion/Extension, Trunk Flexion/Extension, Knee Flexion/Extension, Hip Knee Alignment (E) Bike Fitting: Major Parameters Like Ankle Plantar Flexion /Dorsiflexion, Knee Flexion/ Extension, Hip Flexion, Hip Vertical Travel, Back Angle, Elbow Angle, Armpit Angle, Kops, Knee Tracking. (F) Squat Analysis: Major Parameters Like Descent: Ascent Ratio, Squat Stance Width, Heel Rise Detection, Head Tilt, Shoulder Tilt, Lateral Trunk Tilt, Pelvic Tilt, Frontal Knee Alignment, Knee-Toe Alignment, Trunk Inclination (Sagittal Plane), Tibia Inclination (Sagittal Plane), Knee Flexion (Depth Of Squat). 6. It Should Be Able To Generate Organized Reports With Following Features: (A) Data Represented In Tabular & Photographic Form (B) In Built Reference Ranges For Every Parameter Measured. (C) All Data Lying Outside Reference Ranges To Be Highlighted In Bold (D) Automatic Documentation Of All Observations And Abnormal Biomechanics In Form Of Notes (With Choice Of Hindi Or English Language If Needed). (E) Automatic Summary Of All Reports Should Be Generated. 7. It Should Have An Option To Export All Data To Excel Sheets 8. It Should Have An Inbuilt Comparison Feature That Generates Post Comparison Reports To Monitor Changes In Patients Posture And Gait. 9. It Should Have An In-Built Data Base Feature For Storing Analysis Data. 10. Software Should Use Ai (Artificial Intelligence) Models To Provide Markerless Analysis. 11. Software Should Also Use Ai (Artificial Intelligence) Models To Aid In Marker Digitization In Case Of Marker Based Analysis. 12. Motion Capture Cameras Supporting Video Capture In Outdoor Conditions (Running Track) As Well As Indoor Conditions (Floor, Walkway & Treadmill). Camera Specifications: (A) Wired Cameras-04 In Numbers With Capture Rate Up To 60 Fps. (B) Wirelesscameras-02 In Numbers With Capture Rate Up To 240 Fps. 12. The System Should Have Data Transfer Cables And Connector Cables For Camera Along With Tripods For Mounting Of Cameras. 13. Marker Set (With Marker Placement Guide) For Standing Posture, Walking Gait Analysis, Running Gait Analysis And Bike Fitting With Reusable Markers Or Disposable Markers (Adequate In Number For Conducting At Least 100 Tests Each) 14. Compression Clothing For Lower Body & Upper Body Should Be Provided. 15. Quality Clearance For Cameras: Usfcc/ Euce/ Isobis (Either Of The Certifications). 16. Should Be Safe And Non-Invasive, Easy To Use. 17. Carry Case/Bag For Storing And Carrying All Hardware Equipment To Be Provided. 18. In Person Training, Virtual Assistance & Technical Support For System Operation. 19. The Biomechanical Analysis Software Should Have License Validity Along With All Updates And Bug Fixes For A Minimum Period Of 10 Years. 20. The System Should Come With A Hardware Warranty Of 3 Years. 21. Computer Specifications: Intel 5Th Generation Processor Or Better, 8 Gb Ram, Windows 10/11, At Least 2 Usb Ports. , Foot Pressure Analysis System (Open) , 1. The Number Of Sensors Should Be Between 2900 To 4000. 2. The Active Sensor Area Should Be At Least 375 X 375 Mm. 3. The System Should Be Able To Perform Static (Standing) & Dynamic (Walking) Assessment And Provide Data Of Foot Pressure Distribution During These Activities. 4. It Should Also Have Capability To Perform Sway (Balance) Assessments During Eyes Open And Closed Conditions. 5. System Should Be Able To Generate Automated Remarks For Symmetries Of Pressure Distribution. 6. System Should Be Able To Identify Change In Pressures With & Without Footwear /In Soles. 7. Option Of Comparing Patients Data Over Time Should Be Provided. 8. Option Of Exporting Report Data In Excel Format Should Be Available. 9. Facility To Email Report With Patient Information Should Be Provided. 10. System Should Have Wired Operation. 11. System Should Work Without The Internet. 12. Should Have Operating Temperature Range Between 5° C To 50°C 13. Frequency Range Should Be At Least 100 Hz 14. Pressure Range Should Be Between 1 To 150 Psi 15. Sensor Resolution Should Be Equal To Or More Than 2 Per Cm^2 16. Sensor Technology Should Be Piezo Resistive 17. Should Be Supplied With A Padded Carry Bag. 18. Should Be Supplied With 2 Additional Dummy Platforms 19. System Should Not Need A Separate Electrical Supply And Should Draw Power From The Computer. 20. The Complete System Should Have 3-Year Hardware Warranty Period Along With Software Updates And Tech Support. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
10.
Heavy Industries and Public Enterprises #11321092 Technical Bid
Tender For Civil And Mep Works For Setting Up Hindlabs Minor Lab, Barpeta, Assam- 1 Civil Works 2 Solid Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20X15Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Etc Complete 3 12 Mm Cement Plaster Of Mix:1:6 (1 Cement : 6 Fine Sand). 4 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade:New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 5 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 6 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 7 Providing And Laying Premiumvitrified Tiles In Floor In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier,Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Glazed Vitrified Tiles Matt/Antiskid Finish Of Size Size Of Tile 600 X 1200 Mm 8 Providing And Laying Premium Vitrified Wall Tile In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600 X 1200 Mm 9 Providing And Fixing Fiber Glass Reinforced Plastic (Frp) Door Frames Of Cross- Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminated Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 10 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 11 Providing And Fixing To Existing Door Frames.30 Mm Thick Fiberglass Reinforced Plastic (F.R.P) Flush Door Shutter In Different Plain And Wood Finish Made With Fire Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate All Around, With Suitable Wooden Blocks Inside At Required Places For Fixing Of Fittings And Polyurethane Foam (Puf) / Polystyrene Foam To Be Used All Filler Material Throughout The Hollow Panel, Casted Monoolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is : 14856, Complete As Per Direction Of Engineer- In-Charge. 12 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 13 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 14 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 15 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm,With Swan Neck Faucet With Pipe In Let And Drain Provision, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:Kitchen Sink With Drain Board510X1040 Mm Bowl Depth 250 Mm 16 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms 17 Providing And Fixing Cp Towel Rod Complete Fixed With Cp Brass Screws Of Approved Quality Of Minimum 600Mm Length Approved As Per The Requirement Of Engineer In Charge. 18 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions: 45 Cm Length15 Mm Nominal Bore 19 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 40 Mm Dia 20 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 21 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 10Kgf/Cm2 22 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work,Including Cutting Chased And Making Good The Wall Etc. 20 Mm Pipe 12 Kgf/Cm2 23 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 6 Kgf/Cm2 - External Work - Exposed On Wall 24 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 25 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia 45 Degree Elbow 26 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75X75X75 Mm Dia Door Tee 27 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75 Mm Dia Bend 28 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 50 Mm Pipe 10 Kgf/Cm2 29 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes,Including Jointing With Pvc Solvent Cement - 75 Mm Dia Vent Cowl 30 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia End Cap 31 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -110 Mm Dia End Cap 32 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X110 Mm Dia Door Tee 33 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 34 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/Clips At 1.00 M Spacing. This Included Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 75 Mm Dia 6Kgf/Cm2 - External Work- Exposed On Wall 35 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Partition Of Approved Brand And Manufacture, Including Top & Bottom Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Fittings, All Complete As Per Direction Of Engineer-In-Charge. 36 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc To Be Paid Separately) 37 Providing And Fixing Ss H Handle Having Min 45 Cm Length In Toughed Glass Door Including All Necessary Screws Etc. Complete. 38 Providing And Fixing 3M Fasara Frosted Etching Film Of Thickness 25 Microns Self- Adhesive Of Approved Colour, Shade, And Quality With Cutting As Per Approved Design And Pattern, Including Cleaning Of Glass And Making Surface Smooth For Fixing Of Film To The Surface, All Completed As Per The Direction Of The Engineer In Charge. 39 Providing And Fixing Of Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete 40 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately):For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 41 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately)Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15) 42 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides 43 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 44 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/ Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete,Complying To Astm C920, Din 18540-F & Iso 11600Upto 5 Mm Depth And 5 Mm Width 45 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 46 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper 47 Providing And Fixing Bright Finished 100 Mm Mortice Lock With 6 Levers Without Pair Of Handles Of Approved Quality For Aluminium Door, With Necessary Screws Etc Complete As Per Direction Of Engineer- In- Charge. 48 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 49 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm 50 Vinyl Transparent Vision Glass Stickers: Supply And Pasting Of Vinyl Transparent Vision Glass Stickers In Approved Size And Design In Glass Partition And Door As Per The Instruction Of Engineer In Charge. 51 Backlit Acrilic Board With Projected Letters: Supply, Installation, Testing And Over Suitable Welded And Painted 25X25X3Mm Ms Angle Frame In Suitable Location And In Proper Line And Level With All Necessary Fastners, Supports Etc. Electrical Works Likes Electrical Wirings, Connections, Fittings, Externaly Fixed Weather Proof 2/3 Pin Plug Points And Sockets Including Boxes Etc. To Be Complete Properly. All Fabrication And Fixing Should Be Done As Per Approved Design And Instructions Of Engineer In Charge. (Note: Only Front Elevation Will Be Measured.) 52 Furniture 53 Supply And Erection Of Airport Type 3 Seater Waiting Chair With Powder Coated Chromium Finish Having Minimum Dimensions 1675Mm Length X 710Mm Width X 775Mm Total Height And 400Mm Seat Height . Seat: High Quality Cold Rolled 1.2Mm Thick Steel Perforated Sheet Pressed And Welded To Form The Shape. Arm & Leg: High Quality 1.2Mm Thick Ms Tube / Sheet . Cross Bar: High Quality Cold Rolled 2Mm Thick Steel Sheet Pressed And Welded To Form The Shape. 54 Supply Of Phlebotomy Chair With Optimum Design Made Up Of Ms Power Coated Frame And Up Upholstery Type Seat,Back Rest And Arm Rests.Both Side Arm Rest Should Be With Height And Position Adjustable System And All As Per The Instruction Of Engineer In Charge. 55 L-Type Workstation Of Overall Size (1350 * 600)Mm + (1000 * 450)Mm X 750 Mm (L X D X H) And Pedestal Unit Made Up Of 18 Mm Thick Exterior Grade-I Mdf Board On All Sides Conforming To Is:14587 From Approved Makes Such As Century/Greenply/Fineply Or Equivalent With Decorative Laminate On Both Side And All Edges To Be Fixed With 2Mm Thick Pvc Edge Beading. One Three-Drawer Modular Pedestal Unit Of Minimum Size 450 Mm (W) X 500 Mm (D) X 650 Mm (H) All With Retractable Key Board Tray, Drawer Channels, Hinges, Handles, Individual Locking System, And All Necessary Fittings And The Workstation Should Have An Electrical Flip Box With 2 Nos Universal Power Socket & 1 No Data Socket Etc And Cable Management Tray. All Work As Per The Approved Design And Instruction Of The Engineer-In-Charge/Architect. 56 Providing And Erection Of Reception Counter Table Of Length 1200 Mm And First Level Should Be Provided At A Height Of 750 Mm And Width 600 Mm And The Second Level At A Height Of 1050Mm From Base With A Width Of 300. The Table Made Of 18Mm Thick Pre Laminated Medium Density Board Of Exterior Grade (Grade I) Is: 14587:1998 With Decorative Laminated Finish On Both Sides And 2 Mm Thick Pvc Beading On All Edges, Including Electrical Flip Box, Cable Measurement Tray, Grommets With 3 Nos Universal Power Socket And Ethernet Port, Three Drawer Pedestal Unit With Drawer Channel, Handles, Hinges, Lock All Complete As Per Approved Drawing And Installation Of Engineer In Charge/Architect. 57 Supply And Installation Of Visitors Chair Medium Back, Mesh Back Cushion Seat With Fixed Supports Made Of 304 Stainless Steel/ Powder Coated Ms Of Approved Colour Or Shade As Per The Instruction Of The Engineer In Charge 58 Revolving Chair: Medium Back Ergonomic Chair With Five Nos. Star Shaped Nylon Base. Castor: 50Mm Diameter Nylon Twin Wheel, Gas Lift Height Adjustment, Back Angle Adjustment , Fixed Armrest Providing Natural Resting For Arms. Seat With Pu Coated Foam Backed Fabric, Back Rest With Mesh Type Fabric, Upholstery: Heavy Duty Rubber Backed Fabric In Black 59 Counter Height Stools :Supply And Erection Of Counter Height Stools ( Bar Stools ) Of Following Specifications : Revolving Adjustable Chrome Plated Steel Body Chairs With Resistance To The Corrosion. Cushion Seat With Lift Mechanism For Adjustment Of Height. Minimum Height 750Mm Before Expansion. Medium Back Rest And Arm Rest. Item Shall Be Of Reputed Make. 60 Supplying And Fixing Of Lab Work Table With 18 Mm Thick Edge Moulded Granite Top Supported Over 18Mm Thick Marine Ply Wood Of 2500Mm,L X 1200Mm,W X 850Mm, H And Powder Coated Gi Frame Of Section Size Not Less Than 50X50X1.5 Mm Including And Providing 4 Nos Under Storage Movable Cabinents Of Size 600Mm,L X 450Mm,D X 750 Mm,H And Powder Coated Steel Sheet Of Thickness Not Less Than 1Mm With 1 Drawer And Partition Bottom Storage Space With Door Including Drawer Channels, Individual Locks And Handles All As Per The Approved Drawing And Instructions Of Engineer In Charge 61 Lab Work Bench -The Work Bench Top Made Up Of 18Mm Thick Granite Top Edge Moulded Over 18 Mm Thick Marine Plywood And Gi Powder Coated Frame Work Of Section Size Not Less Than 50X50X1.5Mm. The Width Of The Table Shall Be 750Mm And Height Shall Be 850Mm. The Frame Provided With Level Adjusting Screws Fixing Accessories ,Carriage Of Material All Complete As Per The Approved Drawings And Direction Of Engineer In Charge.Note Only Length Of The Table Shall Be Measured For Making Payment. 62 Cabinet/Wardrobe: Providing And Errection Of Cabinet/Wardrobe Unit Made With 18 Mm Thick Prelaminated Mdf Board Of One Side Decorative Lamination And Other Side Balancing Lamination Having Total Unit Dimension Of 900Mm,L X 450Mm,Dx 2400Mm,H And All Edges To Be Sealed With Pvc Edge Beeding Of 2.00 Mm Thick Including All Fittings Such As Autoclose Hinges,Chromium Plated Brass Individual Locks & Handles ,Tower Bolts Etc All Required. All Shelves To Be Fix With Proper Support And Bracket Holders At A Spacing Of 400 Mm Centre To Centre And All As Per The Drawings And Instruction Of Engineer In Charge. Board Make : Greenlam/ Merino / Century/ Equivalent . Only Front Elevation Will Be Measured. 63 Overhead Storage: - Providing And Fixing Overhead Storage Unit With Minimum 18 Mm Thick Pre-Laminated Medium Density Fiber Board Exterior Grade (Grade-I) Is: 14587:1998 Marked With One Side Decorative And Other Side Balancing Lamination. Cupboard Shutters Edge To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickel Plated Bright Finishing M.S. Piano Hinges Conforming To Is:3818 Marked With Fixing Chromium Plated Brass 50 Mm Cupboard Or Wardrobe Knobs, Special Quality Chromium Plated Brass Cupboard Locks With Six Levers Of Approved Quality Including Necessary Screws Etc. Complete. Only Front Elevation Will Be Measured. 64 Electrical- Wiring 65 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 66 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 67 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 68 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 69 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 6 Sq.Mm + 1 X 6 Sq.Mm Earth Wire 70 Fixtures 71 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socketoutlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Beused In Non Residential Buildings) 72 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 Ampsmodular Socket Outlet And 15/16 Amps Modular Switch, Connection Etc. As Required 73 Supplying & Fixing Suitable Size Gl Box Wih Modular Plate And Cover In Front Onsurface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25A Modular Sp Mcb, C Curve Including Connections, Painting Etc. Asrequired. 74 Supply, Installation Of Surface Mounted Led Tubelight. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification. Luminaire Shall Be Designed To Emit At Least 3600Nominal Lumens And Efficacy Of Atleast 105 Lumen/Watt And Minimum System Wattageof 30 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Upto 30% Over 25K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. Make - Philips, Crompton, Wipro, Havells 75 Supply And Installation Of Surface/Recess Mounted Led Round/Square Luminaire With Crca Housing Suitable With Fully Diffused Diffuser For General Lighting In Offic Eareas. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K, Cool White Light. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification.Luminaire Shall Be Designed To Emit At Least 1000 Nominal Lumens And Efficacy Ofatleast 105 Lumen/Watt And Minimum System Wattage Of 10 -15 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Up To 30% Over 50K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. For Light Fittings To Be Installed In False Ceiling, All Required Cuttings Shall Be Made And Damages Shall Be Made Good As Per The Direction Of Engineer In Charge. Make-Philips, Crompton, Wipro 76 Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizes Using Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With Pvc Insulated And Pvc Sheathed 650/1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 1200Mm Sweep - 5 Star Rated, 3 Blade Ceiling Fan Complete With 300Mm Down Rod, Canopies,Shackles. 77 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existingmodular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 78 Supplying, Conveyance And Installation Of 3 Blade, 400 Mm Sweep, 1400 Rpm Wall Mount Fan Including Frames And All Mounting Accessories Complete. Recommended Make: Usha/ Havells/ Bajaj / Almonard Or Equivalent 79 Supplying, Conveyance And Installation Of 150 Mm Sweep,1800 Rpm Exhaust Fanincluding Frames And Allmounting Accessories Complete. Recommended Make: Usha/Havells/Bajaj Or Equivalent 80 Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required. 81 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required. 82 Supply, Installation Of 12 Watt Led Bulb. 83 Db And Switchgear 84 Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages, Colour Washing Etc. As Required6 Way (8+18) - Double Cover Tpn Vertical Db With Provision For Fixing 4P Mcb / Isolator/ Rccb/ Rcbo As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) 85 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 16 Way, Double Door 86 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 87 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 88 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 89 Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existingmcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63Amps 90 Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30Milli Amperes In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required.63 Amps 91 Supplying And Fixing Cable End Boxes (Ip 43) Suitable For Following Single Poleand Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess,Complete With Testing And Commissioning Etc. As Required.For 6 Way, Double Door Spn Mcbdb 92 Cctv And Networking 93 Supply, Conveyance And Installing Of 2Mp Ip Dome/Bullet Camera Having 1/3Progressive Scan True Day And Night Colour Ir Camera Having Effective Pixel Of 2Mp, Video Frame Rate Of 2Mp @30Fps, Minimum Illumination Of 0.01 [email protected], 0Lux@Ir On, 20 M Ir Range, 24 Ir Led, Awb, Agc, Blc, 2D Noise Reduction,With 3.6Mm Board Lense, 12 Vdc, Poe Ip67 Rated Weatherproof Performance. 1 Year Warranty. Make: Bosch/Cp Plus/Honeywell Or Equivalent 94 Supply, Installation And Integration Of 8 Channel Embedded Linux Poe, Nvr (Network Video Recorder), Having Dual Core Embedded Processor, Must Connect 8 Channel Ip Cameras , Should Support Min 2 Sata Hdd Each Of 6Tb And Must Recordvideo Simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smartevent, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(Hevc)/H.264+/H.264, 2 Year Warranty, Image Quality Should Be Maintainedthroughout The Warranty Period. Make: Bosch/Cp Plus/Honeywell Or Equivalent 95 Supply And Installation Of Network Switch. 8 Port Poe Switch 1000Base-T Copper Ethernet Poe+ Connections, 10M/100M/1G Rj-45 Copper Ports, 1000Base-X Fiber Sfp Ports, 8 Port Auto Sensing 10/100/1000 Mbps Poe, Minimum Cpu Memory 512 Mb With 2 Sfp/Combo Ports, Energy Efficient Ethernet (Ieee 802.3Az). Make: Cisco/Cp Plus/ Netgear Or Equivalent 96 Supply And Fixing Of 6U Wall Mounting Rack With Supply And Fixing Of Mounting Brackets For Support Lockable Front Door And Detachable Side Doors, Cable Manager And Pdu Of 4 Or 6 Sockets Including Cooling Fan With Accessories Complete 97 Supply And Installation Of 8Tb Hard Disk 98 Supply And Installation Of Led Color Monitor Of Minimum 32 Inch Screen, Complete,Uhd Display Make: Lg/Samsung/Panasonic Or Equivalent. 99 Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable 100 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25 Mm 101 Supplying And Fixing Rj45 Outlet Including Cover Plate, Keystone Jack And Gang Box Supporting, Connection Etc. As Required 102 Air Conditioning System 103 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Followingcapacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Single Phase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 2 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 104 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Following Capacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Singlephase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4 M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 1.5 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 105 Supply And Installation Of Additional Copper Piping, Cabling From Indoor To Outdoor And Drain Piping For Air Conditioning Unit With Proper Insulation Including All Required On Wall/Above False Ceiling Complete 106 Supply, Installation, Testing And Commissioning Of True On-Line Double Conversion 6 Kva Ups System With 1:1 Crest Factor Single Phase Phase Input – Singlephase Output. Inversion Shall Be Microprocessor Controlled With Instantaneous Sine Wave Control Using Igbt. Ups Shall Have Standard Display Features, Alarms, Safeties, Etc Input Voltage Range : A) Phase & Single Phase With Ground B)Votage Range 190 Vac & 250 Vac C)Input Frequency : 50/60 Hz D)Power Factor : 0.95 Or Above E)Thd : Less Than 5% With Full Load Bypass F) Voltage Range & 200Vac & 240 Vac G) Frequency Range – 45-55 Hz/55-65 Hz Output Voltage Range H)Voltage Range & 200Vac & 240 Vac I)Frequency Range & 50/60 Hz J)Voltage Distortion & Linear Load = 2% K)Voltage Distortion – Nonlinear Load = 5% L)Output Waveform – Pure Sinewave M) Minimum Back Up Time : Continuous 60 Minutes At Full Load Rectifier Shall Be Full Wave Type (Shall Fully Meet The Specified Input Power Requirements) Battery Type: Sealed Lead Acid Maintenance Free Dc Voltage : 24/48/96V Dc System, Battery Nos And Capacity Shall Be Designed For Optimum Storage Space. Make: Liebert Vertiv/Apc By Schneider/Numeric By Legrand 107 Visi Cooler And Refrigerator 108 Supply And Installation Of 260 Litre Refrigerator, Direct-Cool Model With A Minimum 3-Star Bee Rating And Stabilizer-Free Operation. It Shall Use Eco-Friendly Refrigerant (R600A) And Have A High-Efficiency, Low-Noise Compressor. The Unit Shall Include Toughened Glass Shelves, A Vegetable Crisper, Bottle Storage For 2L Bottles, An Internal Freezer Compartment, And A Removable Anti-Bacterial Gasket. It Shall Operate On 230V, 50Hz Ac And Include Standard Accessories Such As An Ice Tray And Egg Tray. The Refrigerator Shall Have 1-Year Comprehensive Warranty And 10-Year Compressor Warranty, With Bis Certification.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
11.
Tourism #11320518 Technical Bid
Tender For Tourism Development Work Of Shri Ramjanaki Temple, Kotawari In Shahjahanpur District.-1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil Dsr-2.6.1 170.25 Cum 133.12 127.80 21757.52 In All Kind Of Soil Upto 1.5M To 3.0M. Depth 2.6.1+2.26.1 18.74 Cum 228.22 219.09 4106.24 In All Kind Of Soil Upto 3.0M To 4.5M. Depth 2.6.1+(2.26.1* 2) 6.37 Cum 323.31 310.38 1977.88 2 Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Sur-Plus Earth As Directed By The Engineer Incharge Up To A Distance Of 30 Meters From The Foundation Trenches. Dsr-2.1.1 35.61 Cum 97.38 93.49 3329.14 3 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. Dsr-2.25 8.70 Cum 147.00 141.12 1227.84 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete Dsr-2.25(A) 55.60 Cum 525.36 504.34 28041.40 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr-4.1.8 70.78 Cum 5108.83 4904.47 347162.56 6 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr-2.27 26.31 Cum 1592.76 1529.05 40229.27 7 Diluting And Injecting Chemical Emulsion For Postonstructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration Dsr-2.35.3.1 194.47 Sqm 232.53 223.23 43411.24 8 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). Dsr-5.3 82.66 Cum 8628.83 8283.68 684729.10 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) Footing Dsr-5.1.2 21.98 Cum 6784.08 6512.72 143149.60 10 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Dsr-5.2.2 22.97 Cum 8139.44 7813.86 179484.39 Abstract Of Cost Delhi Schedule Of Rate Effective From 12/07/2023 X (0.735X106/107X1.03) Has Been Followed. Proposed Tourism Development Of Ramjanki Temple At Kotawari, Tilhar, Sahjahanpur, U.P. 11 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr-5.9.5 257.49 Sqm 552.28 530.19 136518.66 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr-5.9.3 407.10 Sqm 695.41 667.60 271778.96 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Dsr-5.9.1 63.96 Sqm 294.10 282.34 18058.37 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts Dsr-5.9.6 208.86 Sqm 720.95 692.11 144554.66 15 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr-6.1.1 16.84 Cum 5527.80 5306.69 89341.45 16 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.1.2 51.30 Cum 5349.01 5135.05 263427.92 17 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources). Dsr-4.11 2.14 Sqm 371.80 356.93 763.83 18 Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. Dsr-4.13 44.55 Sqm 109.61 105.22 4687.75 19 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.4.2 80.04 Cum 6829.23 6556.06 524747.32 20 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Dsr-6.13.2 60.18 Sqm 842.82 809.11 48692.17 21 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More Dsr-5.22A.6 186.64 Qtl 8088.48 7764.94 1449250.34 22 15 Mm Cement Plaster On Plinth Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Coarse Sand) Dsr-13.5.1 65.74 Sqm 308.80 296.45 19488.62 23 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.5.2 252.10 Sqm 296.50 284.64 71758.35 24 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.4.2 609.85 Sqm 257.73 247.42 150888.63 25 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. Dsr-5.30 315.01 Rm 58.80 56.45 17781.09 26 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr-11.3.1 29.40 Sqm 460.63 442.21 13000.95 27 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement.18 Mm Thick Dsr-11.6.1 3.35 Sqm 496.52 476.66 1596.81 26 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr-11.41.2 137.75 Sqm 1165.05 1118.45 154065.99 27 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To |.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm Dsr-11.46.2 10.17 Sqm 1217.25 1168.56 11884.22 28 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr-11.37A 148.53 Sqm 812.00 779.52 115781.77 29 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Dsr-11.39 4.40 Sqm 997.47 957.57 4213.30 30 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Ordinary Cement Without Any Pigment 11.20.4 6.12 Sqm 792.24 760.55 4654.54 31 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 35 Mm Thick Dsr-9.5.1.1 6.30 Sqm 3083.86 2960.50 18651.18 32 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 30 Mm Thick Dsr-9.5.1.2 83.22 Sqm 2810.38 2697.97 224524.67 33 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Dsr-9.21.1 15.33 Sqm 1794.43 1722.65 26408.23 34 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10X15Cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). Dsr-9.53 128.00 Nos 171.63 164.77 21090.11 35 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding Dsr-9.48.1 937.05 Kg 164.32 157.75 147816.54 36 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10X10 Cm Of C.C. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). Dsr-10.13.1 100.80 Kg 106.27 102.02 10283.67 37 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35X5 Mm, Joints Mitred And Welded By Angle Iron 35X35X5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. Dsr-10.31 125.00 Kg 97.87 93.96 11744.60 38 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Dsr 10.28 133.33 Kg 579.28 556.11 74146.05 39 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).(Sal Wood) Dsr-9.1.2 1.61 Cum 87387.28 83891.79 135065.79 40 Fixing Of Door, Windows/Ventilators Chaukhats In Position. (A) Door Chaukhats Above 1.5 Sqm To 5.0Sqm Mr 19.00 Nos 150.00 144.00 2736.00 (B) Window Chaukhats Above 1.5 Sqm 12.00 Nos 100.00 96.00 1152.00 (C) Ventilator Chaukhats 7.00 Nos 50.00 48.00 336.00 41 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) Dsr-13.47.1 407.00 Sqm 128.32 123.19 50137.46 42 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr-13.41.1 434.15 Sqm 139.23 133.66 58030.01 43 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dsr-13.80 841.15 Sqm 117.03 112.35 94505.07 44 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm Dsr-9.62.2 11.00 Nos 145.27 139.46 1534.05 45 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 250X10 Mm Dsr-9.63.1 21.00 Nos 62.92 60.41 1268.53 200X10 Mm Dsr-9.63.2 65.00 Nos 52.05 49.97 3247.81 46 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete :100 Mm Dsr-9.66.2 54.00 Nos 24.41 23.44 1265.50 47 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete Dsr-9.82 1.00 Nos 91.23 87.59 87.59 48 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm Dsr-22.7.1 198.55 Sqm 1263.41 1212.87 240815.58 49 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture Dsr-13.48.3 144.65 Sqm 128.02 122.90 17777.47 50 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Dsr-13.48.2 209.70 Sqm 132.18 126.90 26610.03 51 Providing & Fixing Panes Of Glass With Equal Or Equivalent I.S.I Marked Quality Putty. Brads And Springs And Including Supply Of All Materials And Labour Etc Complete . 3.8 To 4.7 Mm Thick Dsr-10.30.1 44.76 Sqm 805.96 773.72 34631.80 52 Supply And Fixing Of Drop Down Rail / Grab Bars Mr 4.00 Nos. 4400.00 4224.00 16896.00 53 Providing, Driving With Hydraulic Piling Rigs With Power Units And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-25 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap) : 400 Mm Dia Piles Dsr-20.1.1 48.00 Rm 2075.18 1992.17 95624.30 54 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 30 Mm Thick Dsr-8.14.1.5 50.74 Sqm 3971.79 3812.92 193478.98 55 Stone Work In Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Including Pointing With Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade Both Face Dressed Red Sand Stone Dsr-7.12.1.1 3.56 Cum 51218.78 49170.03 175241.97 56 Extra For Stone Work Ashlar Sunk Or Moulded Or Sunk And Moulded Or Carved In : Triangular Or Square Or Rectangular Pillars Dsr-7.21.1 3.56 Cum 2834.15 2720.79 9696.89 57 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr-8.15 99.58 Kg. 535.78 514.35 51219.04 58 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 50Mm Dsr 8.14.1.3 37.80 Sqm. 4342.28 4168.59 157572.62 59 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 30.00 Nos. 32.92 31.61 948.21 60 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone Dsr 7.33.1 4.50 Sqm. 11198.29 10750.35 48376.59 61 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade.: Red Sand Stone Dsr 7.32.1 0.47 Cum. 70303.46 67491.32 31720.92 62 Carving & Engraving Work On Red Sand Stone (Labour Only) M.R. 9.73 Sqm. 15615.00 14990.40 145856.59 63 Manufacturing, Supplying And Fixing Retro Reflective Overhead Signage Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity And Encapsulated Lens Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iii Of Astm-D-4956-01 As Approved By Engineer-In-Charge, Letters, Borders Etc. As Per Irc : 67-2001 In Silver White With Blue Colour Back Ground And With High Intensity Grade, Pasted On Substrate By Pressure Sensitive Adhesive Backing Which Shall Be Activated By Applying Pressure Conforming To Class Ii Of Astm-D-4956-01 And Fixing The Same To The Plate Of Structural Frame Work By Means Of Suitable Sized Aluminium Alloys, Rivets Or Bolts & Nuts @ 300 Mm Centre To Centre All Along The Periphery As Well As In Two Vertical Rows Along With Theft Resistant Measures, Including The Cost Of Painting With Two Or More Coats Of Epoxy Paint In Grey Colour On The Back Side Of Aluminium Sheet Including Appropriate Priming Coat. The Rate Includes The Cost Of Rounding Off The Corners, Lowering Down The Structural Frame Work From The Gantry, Fixing And Erecting The Same In Position All Complete As Per Drawings, Specification And Direction Of The Engineerincharge.( Structural Frame Work Including M.S. Plate To Be Provided Separately. Rectangular Area Of The Sheet Only Shall Be Measured For Payment). Overhead Informatory Road Signage Dsr 16.60.1 8.64 Sqm. 4409.78 4233.39 36576.45 64 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Dsr 8.2.2.2 34.45 Sqm 3852.10 3698.01 127396.50 65 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Dsr-4.17 6.00 Sqm 561.96 539.48 3236.87 66 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour Design And Pattern Dsr-16.91.2 207.07 Sqm 818.60 785.85 162723.31 1 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 17.1.1 2.00 Nos. 5075.38 4872.36 9744.73 2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.1 3.00 Nos. 4886.50 4691.04 14073.11 3 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require A) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.7.4 4.00 Nos. 1409.35 1352.98 5411.91 4 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required A) One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern 17.4.1 3.00 Nos. 4918.90 4722.14 14166.42 5 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 17.28.2 A) 32Mm Dia 17.28.2.1 4.00 Nos. 89.66 86.07 344.29 B) 40Mm Dia 17.28.2.2 2.00 Nos. 89.66 86.07 172.15 6 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.31 4.00 No. 1205.92 1157.69 4630.74 7 Providing And Fixing Cp Brass Single Lever Lelephonic Wall Mixture Of Quality & Make And As Per Thedirection Of Enginer-Incharge. A) 15Mm Dia Nominal Dia. 17.22B 2.00 Each 5205.39 4997.17 9994.34 8 Providing And Fixing 8 Mm Dia C.P./S.S. Jet With Flexible Tube Upto 1 Meter Long With S.S. Triangular Plate For Eureopean Type W.C. Of Quality And Make As Approved By Engineer-In-Charge. 15Mm Nominal Bore 17.16A 2.00 Each 261.85 251.38 502.76 Sanitary Fixtures & Accessories : I 9 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. Dsr-17.73.2 1.00 Each 531.69 510.43 510.43 10 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106 Gms. Dsr-18.65 1.00 Each 83.58 80.24 80.24 11 Providing And Fixing C.P. Brass Ablution Health Faucet Assembly With 1.0 M Long Braided Pvc Hose With Mounting Bracket Fixed On Wall Complete.[For Ewc]-Make-Jaquar Ald565 Mr 2.00 Each 1705.00 1636.80 3273.60 12 Providing And Fixing C.P. Brass Two-Way Angle Valve For Ewc Points & For Fixing Ablution Health Faucet Of Approved Quality Conforming To Is:8931. 15 Mm Nominal Bore-Essco Sqt 526A Mr 2.00 Each 1335.00 1281.60 2563.20 1 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion . (I) Single Socketed Pipes. A) 110Mm Diameter 12.41.2 31.30 Mtr 283.04 271.72 8504.80 2 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over Pvc Sheet 1M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement,Punning,Rounding The Edges And Making And Finishing The Outlet Complete. A) 110Mm 12.22 7.00 Nos. 223.68 214.73 1503.13 3 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. A) 110Mm 12.43.2 20.00 Nos. 278.47 267.33 5346.54 4 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. 110 Mm Diameter 12.41.2 Rm. 283.04 271.72 5 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. Dsr-12.44 8.00 Nos. 41.02 39.38 315.06 6 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Nsr 20.00 Rm. 485.00 465.60 9312.00 B) 90Mm Dia P.V.C. Pipe Nsr 25.00 Rm. 390.00 374.40 9360.00 6 Providing & Fixing Upvc Floor Trap Of Self Cleansing Design With Cp Jali Complete In All Respects. (Make : Supreme / Finolex / Prince) P-Trap Type Floor Trap 110 X 90 Mm Nsr 12.00 No. 195.00 187.20 2246.40 7 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/Accessories For Unplasticised Rigid Pvc Pipes Including Jointing With Seal Ring Leaving 10 Mm Gap For Thermal Expansion.. (Make : Supreme / Finolex / Prince) Door Tee 110X110X110 Mm Nsr 2.00 No. 280.00 268.80 537.60 110X110X90 Mm Nsr 2.00 No. 200.00 192.00 384.00 Bend 110 Mm Nsr 2.00 No. 170.00 163.20 326.40 Soil Waste & Vent Pipes And Fittings - Ii 90 Mm Nsr 2.00 No. 160.00 153.60 307.20 1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.Lls Etc. (Internal Work) I) Exposed On Wall A) 32Mm Nominal Dia Pipe 18.9.4 30.00 Rm. 328.94 315.78 9473.44 3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Outer Dia Pipes 18.7.3 20.00 Rm. 301.15 289.11 5782.13 4 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. A) 15Mm Dia Nominal Outer Dia Pipes 18.8.1 70.00 Rm. 373.34 358.40 25088.28 B) 20Mm Dia Nominal Outer Dia Pipes 18.8.2 20.00 Rm. 403.19 387.06 7741.18 C) 25Mm Dia Nominal Outer Dia Pipes 18.8.3 Rm. 470.42 451.60 5 Providing & Fixing G.I. Pipes Complete With G.I. Fittings & Clamps Including Cutting & Making Good The Walls Etc. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Bore (Medium Duty) Dsr-18.10.3 20.00 Rm. 413.76 397.21 7944.21 Ii) Concealed Pipe Including Painting With Anticorrosive Bitumatic Paint, Cutting Chases And Making Good The Wall. A) 15Mm Dia Nominal Bore Dsr-18.11.1 15.00 Rm. 435.32 417.91 6268.65 2 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work. A) 15Mm Dia Nominal Bore. Dsr-18.38.1 15.00 Rm. 14.55 13.97 209.51 B) 25Mm Dia Nominal Bore. Dsr-18.38.3 10.00 Rm. 22.69 21.78 217.79 2 Providing And Fixing 45 Cm Long Unplasticised Pvc Connection Pipe With Brass Unions. A) 15Mm Nominal Bore Dsr18.21.2.1 4.00 Nos. 73.31 70.38 281.51 5 Providing & Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.49.1 7.00 Nos. 380.09 364.88 2554.19 6 Providing & Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. A) 15Mm Nominal Bore 18.51.1 7.00 Nos. 599.19 575.22 4026.57 7 Providing & Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.53.1 14.00 Nos. 430.71 413.48 5788.75 8 Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality. A) 25Mm Dia Nominal Bore 18.17.1 2.00 Each 466.78 448.11 896.23 B) 32Mm Dia Nominal Bore 18.17.2 1.00 Each 517.18 496.50 496.50 C) 50Mm Dia Nominal Bore 18.17.4 Each 769.96 739.16 Water Supply Pipes And Fittings - Iii 9 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete 20Mm Dia Nominal Bore 18.18.2 1.00 Each 346.86 332.99 332.99 A) 25 Mm Nominal Bore 18.18.3 2.00 Nos. 348.03 334.10 668.21 10 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 18.48 A) Circular Tank 18.48 2500.00 Ltrs 8.25 7.92 19799.33 11 Providing And Fixing Stone Slab Table Rubbed, Edges Rounded And Polished Of Size 75X50Cm Deep And 1.8Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 (1Cement: 2Coarse Sand: 4Graded Stone Aggregate 6Mm Nominal Size) As Per Direction Of Engineerin-Charge And Finished Smooth. 8.10 Granite Stone Of Approved Shade Dsr-8.10.2 1.08 Sqm. 3038.79 2917.23 3150.61 1 Providing & Fixing Soil, Waste And Vent Pipes. A) 100Mm Dia Centrifugally Cast Iron S & S Pipe. Dsr17.35.1.2 6.00 Rm. 885.53 850.11 5100.67 2 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes & Fitting Of Diameters. A) 100Mm Dsr-17.58.1 2.00 Each 466.86 448.18 896.37 3 Providing & Fixing M.S. Holder Bat Clamps Of Approved Design To Sand Cast Iron/Centrifugally Cast (Spun) Iron S & S Pipe Embeded In & Including Cement Concrete Blocks 10X10X10Cm. Of 1:2:4 Mix (1 Cement : 2 Coarse : 4 Graded Stone Aggregate 20Mm Nominal Size). Including Cost Of Cutting Holes & Making Good The Walls Etc. A) For 100Mm Dia Pipe. Dsr-17.37.1 2.00 Each 272.13 261.24 522.49 4 Providing & Fixing Cast Iron Trap Of Self Cleansing Design With Or Without Ventarm Complete, Including Cost Of Cutting & Making Good The Walls & Floors. A) 100Mm Inlet & 75Mm Outlet. Dsr17.60.2.1 1.00 No. 1481.31 1422.06 1422.06 5 Providing & Fixing Cast Iron Coller. A) 100Mm Dia. Dsr17.57.1.2 2.00 No. 384.85 369.46 738.91 6 Providing And Fixing Plain Cast Iron S & S Sanitary Bend. A) 100Mm Dsr17.39.1.2 2.00 Nos. 427.52 410.42 820.84 1 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Mr 7.50 M 485.00 465.60 3492.00 2 Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With F.P.S. Bricks Of Class Designation 75 And Water Tight C.I. Cover With Frame Of 300 X 300Mm. Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. A) 150 X 100 Mm. Size P Type With Sewer Bricks Conforming To Is : 4885 Dsr-19.4.2.1 1.00 Nos 2050.58 1968.56 1968.56 Soil Waste & Vent Pipes And Fittings - Ii Schedule Of Quantities For Internal Sewerage System - Iv 3 Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Rcc Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.7 Inside Size 90X80Cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610Mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg). 19.7.1 With Fps Bricks Of Class Designation 150 Dsr-19.7.1.1 1.00 Each 9577.59 9194.49 9194.49 External Sewerage Works 1 Excavating Trenches In All Kind Of Soil Of Required Width For Pipes. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Including Getting Out The Excavated Soil & Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering, Etc & Disposing Of Surplus Excavated Soil As Directed Within A Lead Of 50M. Up To 1.50 M Depth Pipes 80 Mm To 300 Mm Diameter 2.10.1.2 20.00 Rm 264.10 253.54 5070.79 2 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. 160Mm Dia Under Floor (For External Sewer) Nsr 20.00 Metre 1190.00 1142.40 22848.00 3 Constructing Brick Masonry Manhole With F.P.S. Bricks In Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Rcc Top Slab With 1 : 2 : 4 Mix (1 Cement : 2 Coarse Sand : 4 Grade Stone Aggregate 20Mm Nominal Size); Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1Cement 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size) Finishd With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90 X 80 Cm & 45 Cm Deep Including Ci Cover With Frame (Light Duty) 455 X 610 Mm Internal Dimension Total Wt. Of Cover & Frame To Be Not Less Than 38 Kg (Wt. Of Cover 23 Kg And Wt. Of Frame 15 Kg) 19.7.1.1 3.00 Nos 9577.59 9194.49 27583.46 4 Extra For Depth For Manhole With F.P.S. Bricks Size 90 X 80 Cm 19.8.1.1 0.30 Rm 6618.83 6354.07 1906.22 5 Providing M.S. Foot Rests Including Fixing In Manholes With 20*20*10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design : With 20 X 20 Mm Square Bar 19.15.1 3.00 Nos 408.51 392.17 1176.51 6 Providing And Fixing Square Mouth S.W. Gully Trap Grade `A Complete With C.I. Grating Brick Masonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 180 X 150 Mm. Size P Type 19.4.3.1 2.00 Nos 2101.54 2017.48 4034.96 7 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 19.32.1 1.00 Nos 20145.75 19339.92 19339.92 8 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr-19.15.1 8.00 Nos. 408.51 392.17 3137.37 9 Providing And Fixing S.C.I. Tee 150 Mm At The Inlet And Outlet Of Septic Tank. Dsr-7087 2.00 Nos. 621.00 596.16 1192.32 10 Providing And Fixing Soil, Waste And Vent Pipes:75 Mm Diameter Sand Cast Iron S&S Pipe As Per Is: 1729 Dsr17.35.2.1 3.00 Rmt. 783.54 752.19 2256.58 11 Providing & Fixing Of 75Mm Dia Sand Cast Iron S&S As Per Is - 1729 Terminal Guard. Dsr17.56.2.1 2.00 Nos. 255.52 245.30 490.59 12 Providing & Fixing 75Mm Plane Sand Cast Iron S&S Bend Of Required Drgtee. Dsr17.39.2.1 2.00 Nos. 282.18 270.89 541.78 13 Providing Lead Caulked Joints To Sand Cast Iron/ Cetrifugally Cast (Squn) Irons Pipes & Fitting Of 50 Mm Dia Dsr-17.58.2 2.00 Nos. 394.67 378.89 757.77 14 Providing And Fixing In Position Precast Rcc Manhole Cover And Frame Of Required Shape And Approved Quality.M.D. -10- Circular Shape 500Mm Internal Diameter Dsr19.19.2.2 2.00 Nos. 879.42 844.24 1688.49 1 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.10.3 51.00 Each 1115.37 1070.76 54608.68 2 Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.11 4.00 Each 1187.60 1140.10 4560.39 3 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. Dsr 1.21.1 17.00 Metre 97.32 93.43 1588.26 4 Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire Dsr 1.14.1 650.00 Metre 177.15 170.07 110542.86 5 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire Dsr 1.14.2 188.00 Metre 285.12 273.71 51457.72 6 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire Dsr 1.14.3 202.00 Metre 253.94 243.79 49244.67 7 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Dsr 1.14.4 105.00 Metre 333.78 320.42 33644.59 8 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required Dsr 1.32 22.00 Each 445.54 427.72 9409.83 9 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required Dsr 1.34 15.00 Each 99.60 95.62 1434.25 Electrical Works 10 Installation ,Testing, Commissioning Of Wall Bracket /Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Ls/Cfl/Led Lamps Per Fitting, Complete With All Accessories Including Connections Etc. As Required. Dsr 1.35 1.00 Each 90.48 86.86 86.86 11 Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Lighter (Round/ Square/ Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Frequency 50/60 Hz, Operating Temp Range -50C To 400C, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.≥0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free (Flicker Should Be Below 5%), Life Time (Led, Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K /4000°K / 5700°K / 6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Colour Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Confirming To Relevant Bis Standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 And <120 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C) Powder Coated Die Cast /Extruded Aluminium Body Including Trim 18 Watt Mr 19.00 Each 700.00 672.00 12768.00 12 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required Dsr-5.4 3.00 Each 5681.03 5453.79 16361.37 13 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 55.00 Metre 109.48 105.11 5780.78 14 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole Dsr-2.10.1 9.00 Each 194.64 186.85 1681.68 15 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 6 Way (4 + 12), Double Door Dsr-2.3.1 2.00 Each 1677.24 1610.15 3220.30 16 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 4 Way (4 + 12), Double Door Dsr-2.4.1 1.00 Each 3110.42 2986.01 2986.01 17 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Dsr-2.10.3 2.00 Each 498.76 478.81 957.62 16 Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required Dsr 1.45 10.00 Each 257.74 247.43 2474.35 17 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 10.00 Each 280.55 269.33 2693.32 18 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep Dsr-1.50.1 7.00 Each 342.14 328.45 2299.17 19 Extra For Fixing The Louvers/ Shutters Complete With Frame For A Exhaust Fan Of All Sizes Dsr-1.51 7.00 Each 157.38 151.09 1057.62 20 Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminium Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Steel/Al Body Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum As Below, 350 Rpm (Tolerance As Per Is : 374-2019), Thd (Total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 0C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Ceiling Fan Compliant To Is 374:2019 Fan I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. 9.2.3 10.00 Each 2075.64 1992.62 19926.18 21 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cable 1100 Volts Grade At The Depth Of 750 Mm Bellow Ground Level Over A Cushion Of 75 Mm Thick Sand All Around And Protected With Burnt Bricks On Side And On Top .On Surface The Cable Run Shall Be Fixed On Ms Clamps Etc.Of Suitable Size Or As Directed By The Engineer-Incharge ,Complete In All Respect.The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. Following Size 10 Sqmm X 2 Core Mr 164.00 Rm 410.34 393.93 64603.77 22 Supply & Fixing Of 225/230Mm Sweep Ventilating (Light Duty) Exhaust Fan Complete With Metallic Blade (Steel Bird Guard Protector /Copper Motor For High Air Suction Performance /Capacitor Etc.), Noise Level : (45 - 50) Db, Power Consumption : 45 W, Rated Voltage : 230 V, Rated Frequency : 50 Hz, Motor Type : Normal Speed. Complete In All Respect. Mr 7.00 Each 1665.00 1598.40 11188.80 23 Cost For Murals Work 32.40 Sqm 5850.00 5616.00 181958.40 24 Cost For Solar Street Light With 7M Pole Complete 15.00 Nos 22600.00 21696.00 325440.00 25 Cost For C.C. Bench 12.00 Nos 10000.00 9600.00 115200.00 26 Cost For Dustbin 6.00 Nos 4500.00 4320.00 25920.00 1. Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Levelling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or / And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure).. (Horti) 2.1 159.24 Cum 74.51 71.53 11389.98 2 Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment). (Horti) 2.2 79.62 Cum 491.88 472.21 37597.13 Horticulture 3 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Upto 5 Km Lead Complete (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 20 Mm (Horti) 2.4.1 106.16 Cum 242.46 232.76 24709.88 4 Spreading Of Sludge, Dump Manure And / Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And / Or Good Earth To Be Paid Separately). (Horti) 2.8 159.24 Cum 49.94 47.94 7634.64 5 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge (Horti) 2.9 159.24 Cum 34.87 33.47 5330.39 6 Grassing With Selection No.1 Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Supplying Good Earth, If Needed (The Good Earth Shall Be Paid For Separately). In Rows 5 Cm Apart In Both Directions. (Horti) 2.10.1 530.80 Sqm 16.89 16.21 8604.46 7 Providing And Displaying Of Aglaonema Silver Queen Having 30 Cm To 45 Cm. Ht. With 12 To 15 Leaves, Multi Suckers, Fresh And Healthy Leaves, Well Developed In 25 Cm Dia Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.8 60.00 Each 154.50 148.32 8899.22 (Horti) Dsr 3.8 8 Providing And Displaying Of Aglaonema Dove Variety Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.4 75.00 Each 77.42 74.32 5574.03 (Horti) Dsr 3.4 9 Providing And Displaying Of Aglaonema Marentifolium Variety Having Ht. 23 Cm To 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colorful Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.10 50.00 Each 64.54 61.96 3097.83 (Horti) Dsr 3.10 10 Providing And Displaying Of Chamaedorea Elegans Palm Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.26 50.00 Each 102.70 98.59 4929.51 (Horti) Dsr 3.26 11 Providing And Displaying Of Croton Baby Golden Variety Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.28 150.00 Each 39.11 37.55 5632.42 (Horti) Dsr 3.28 12 Providing And Displaying Of Croton Golden (Broad Leaves) Having Ht. 60 Cm To 75 Cm With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.32 150.00 Each 53.81 51.65 7748.01 (Horti) Dsr 3.32 13 Providing And Displaying Of Dieffenbachia Tropic-Snow Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.40 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.40 14 Providing And Displaying Of Dieffenbachia Mosaic Having Ht. 30Cm To 45 Cm With 10-12 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.41 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.41 15 Providing And Displaying Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.29 50.00 Each 51.79 49.72 2486.05 (Horti) Dsr 4.29 16 Providing And Displaying Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-Incharge. (Horti) 4.31 150.00 Each 61.63 59.16 8874.49 (Horti) Dsr 4.31 17 Providing And Displaying Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.75 120.00 Each 51.85 49.78 5973.11 (Horti) Dsr 4.75 18 Providing And Stacking Of Plant Mogra Of Height 25 To 30 Cm., 2 To 3 Branch In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.88 100.00 Each 44.03 42.27 4226.60 (Horti) Dsr 4.88 19 Providing And Stacking Of Plant Canna Dwarf Of Height 25 To 30 Cm., 2 To 3 Suckers In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.89 100.00 Each 34.25 32.88 3287.87 (Horti) Dsr 4.89 20 Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well Developed With 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot /Plastic Pot As Per Direction Of The Officer-Incharge. (Horti) 4.90 100.00 Each 24.47 23.49 2349.13 (Horti) Dsr 4.90 21 Providing And Displaying Budded Rose (H.T. Variety) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.91 100.00 Each 31.29 30.04 3003.96 (Horti) Dsr 4.91 22 Providing And Displaying Standard Rose (H.T. Variety) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.93 75.00 Each 143.77 138.02 10351.28 (Horti) Dsr 4.93 23 Providing And Stacking Of Plumeria Rubra Of Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge. (Horti) 7.72 75.00 Each 381.60 366.34 27475.20 (Horti) Dsr 7.72 24 Providing And Stacking Of Polyalthia Longifolia (Ashok) Of Height 180-195 Cm. In Gunny Bag Of Size 30 Cm As Per Direction Of The Officer-Incharge. (Horti) 7.75 75.00 Each 95.40 91.58 6868.80 (Horti) Dsr 7.75 25 Providing And Stacking Of Saraca Indica (Sita Ashok) Of Height 105-120 Cm. In Big Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge. (Horti) 7.80 75.00 Each 76.32 73.27 5495.04 (Horti) Dsr 7.80 26 Providing And Stacking Of Terminalia Arjuna Of Height 150-165 Cm. In Big Polybags Of Size 25 Cm As Per Direction Of The Officerin-Charge. (Horti) 7.88 75.00 Each 57.24 54.95 4121.28 (Horti) Dsr 7.88 27 Providing And Stacking Of Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm As Per Direction Of The Officer-Incharge. (Horti) 8.5 150.00 Each 33.39 32.05 4808.16 (Horti) Dsr 8.5 28 Providing And Stacking Of Nerium Oleander (Kaner) Of Height 60- 75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
12.
Educational and Research Institute #11306201 Price Bid
Tender for Rfid Library Automation With Digital Library System , Price Schedule For Infrastructure (Sheet 1) , Price Schedule For Services (Sheet 2) , Price Schedule For Support (Sheet 3) , Price Schedule For Maintenance (Sheet 4) , Security Gate Double Lane 3 Panel , Rfid Tag , Rfid Smart Card , Rfid Staff Station , Rfid Self Issue Return Kiosk , Opac Wall Mount Kiosk , Anti-Theft Sticker , Card Printer , Printer Ribbon , Smart Display With Attendance System , Book Drop Unit- Capacity , Ip Base Indoor Camera , Ip Base Out-Door Camera , Nvr 24 Channel , 55-Inch Display Monitor , Casing And Cabling , Tower Server (For Integrated Library Management System (Lms) , Hard Disk 2Tb , Website Design, Hosting And Cloud Storage (With Ssl) , Mobile App-Android And Ios For Users. Secure Access To Digitized Books And Training Material. , Rfid Web Based Application , Industry-Standard Open-Source Integrated Library Management System (Lms) (Installation & Customization) , Industry Standard Digital Library Software (Dls) (Installation & Customization) , Os (Stable, Open-Source Linux-Based Operating System) For Lms Installation) , Integration Of The Library Website With External Digital Library / E-Bookstores. , Scanning Books, Rare Collection, Thesis And Other Document In Pdf Format (Assuming 310 Pages Per Books) , Quality Control Of Scanned Documents (Assuming 310 Pages Per Books). , Manpower With Scanner, Pc, And Other Required Hardware In Vendor Scope (Assuming 310 Pages Per Books). , Ocr (Assuming 310 Pages Per Books). , Meta Data (Assuming 310 Pages Per Books). , Digital Library Software (Dls) For Uploading Pdf. , Binding Of Books. , Oxford -58 Titles , Cambridge-60 Titles , Manupatra - Subscription For 5 Years - Unlimited , Coursera-Subscription For 1 Year - 100 Licenses , Jstor (Including Journals -More Than 2800 And 13000 Open Access E-Books) Subscription For 5Years , Myloft - Subscription For 5 Years , Job Work Of Tagging Books , Data Entry In Lms. , Networking And Power J
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
13.
Educational and Research Institute #11299551 Price Bid
Tender For Supply Of Library Books , Library Books (Refer Nit) , Industrial Safety And Human Behaviour Kaila 9788174734532 , Engineering Mechanics Vela Murali Bks456005 , Earthquake Resist Design Structural Shashikant Dugg Bks643652 , Surveying And Levelling Subramanian 9780198085423 , Practical Railway Engineering, 2Nd Ed Clifford Bonnett 9780000990136 , Geographic Information Systems Gis For Disaster Management 2Ed Brain 9781032552460 , Design Of Structural Elements Chanakya 9781138046436 , Wind Loading Of Structures 3Rd Edition John D. Holmes 9780367241803 , Structural Analysis 3/Ed Menon 9788184877342 , Concrete Pipes And Pipelines Joshi Bks426990 , Strength Of Materials Basavarajaiah 9788173714580 , Geotechnical Engineering Debashis Moitra 9788173719905 , Textbook Of Environmental Studies For Undergraduate Courses 3 Ed Bharucha 9789389211788 , Intelligent Transportation Systems Srinivasa Kumar 9788195400928 , Transportation Engineering Srinivasa Kumar 9789389211160 , Structural Analysis With Finite Elements Hartmann 9788132208945 , Strength Of Materials Vol 1 Binu Sukumar 9789388005029 , Geospatial Technology Dwivedi 9789380381480 , Heavy Metal And Metalloid Contamination Of Surface And Underground Water Gupta A. 9781032728582 , Fundamentals Of Environmental Engineering Danny D Reible 9781566700474 , Computer-Aided Highway Engineering S Goswami 9781032728483 , Fundamentals Of Hydrology Davie 9781032251936 , Highwall Mining : Applicability, Design & Safety Porathur J. L. 9781032728919 , Environmemtal Pollution Control Engineering 4Ed Rao 9788122472288 , Plane Surveying 3Ed Chandra 9788122438802 , Design Of Reinforced Cement Concrete Vol 1 Structural Elements Bhavikatti 9788122440515 , Strength Of Materials, 2/Ed Jindal 9789352861521 , Fundamentals Of Hydraulic Engineering Sy Houghtalen 9789332507593 , Geotechnical Engineering Coduto,Yeung 9789332587427 , Strenth Of Materials Jindal 9788131759097 , Dynamics Of Structures 2Nd Ed Jain 9789357059350 , Finite Element Method With Cd Eldho Desai Shah 9788131724644 , Soil Mechanics And Foundation Engineering Purushotama Rai 9788131790816 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Dynamics Of Structures In Si Unites 5Ed Chopra 9789353945251 , Elementary Engineering Hydrology Deodhar 9788131708057 , Environmental Studies Basak 9788131721186 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Strength Of Materials Rao 9781108454285 , Plumbing Engineering Nikhil Anthony 9788119365128 , Fundamental Of Ground Improvement Engi Prof.Dr.R.K. Khit 9788195916948 , Surveying And Levelling : Part - 1 Kanetkar Kulkarni Bks644037 , Surveying And Levelling : Part - 2 Kanetkar Bks644038 , A Textbook Of Strength Of Materials Rajput 9789355010704 , Building Construction Bhavikatti 9789325960794 , Fundamental Of Reinforced Concrete Chandra Bks498526 , Irrigation Engineering And Hydraulic Structures Sharma Bks535826 , Surveying I Anne Mary 9788183717304 , Highway Engineering Subramanian 9788183716888 , Strength Of Materials Bansal Bks534222 , Reinforced Cement Concrete Design (Reinforeced Concrete Structures) Punima 9788131809426 , Building Construction Rangwala Bks502124 , Civil Engineering Drawing Rangwala Bks440591 , Soil Mechanics & Foundation Engineering Modi 9788189401306 , Engineering Materials Rangwala Bks385325 , Bridge Engineering Rangwala Bks554100 , Harbour Dock And Tunnel Engineering Srinivasan Bks502125 , Solid Hazardous Watse Management 2Ed Rao 9789389354621 , Textbook Of Remote Sensing And G.I.S 4Ed Reddy 9789381075975 , Reinforced Concrete Design P.B Sharma 9789391910419 , Energy Environment Ecology And Society Anil Kumar 9788178002576 , Solved Problems In Geotecnical Engineering Sharma 9789395038478 , Highway Engineering Suganthi Bks411034 , Highway And Railway Engineering Santhanam Bks638485 , Construction Materials & Tech Mathankumar Bks638450 , Prefabricated Structures Soundrarajan Bks638488 , Structural Analysis-I Santhanam Bks479564 , Green Building Design Molykutty Bks503088 , Irrigation Engineering Basak 9780074635384 , Estimating Construction Costs Peurifoy 9780071239455 , Design Of Steel Structure Duggal 9780070260689 , Concrete Technology Gambhir 9781259062551 , Engineering Mechanics Timoshenko 9781259062667 , Flow In Open Channels Subramanya 9789353166298 , Reinforced Concrete Design 4Ed Pillai 9789354601026 , Surveying Vol - Ii 5Th Edn Duggal 9789353167523 , Surveying And Levelling Basak 9789332901537 , Prestressed Concrete 6Ed Krishna Raju 9789387886209 , Fluid Mechanics White 9789355322043 , Strength Of Materials Rattan 9789385965517 , Surveying Vol - 1 Duggal 9789353167509 , Environmental Studies-3Ed Joseph 9789352605170 , Construction Planning, Equipment Peurifoy 9780070706996 , Fluid Mechanics Fundamentals And Applic Cengel 9789353166212 , Schaums Outline Of Finite Element Analysis Buchanan 9789389691375 , Wind Energy Theory And Practice 3Ed Ahmed Bks662294 , Bituminous Road Construction In India Kandhal 9789391818821 , Mechanics Of Composite Structures Vasiliev 9781138582101 , Satellite Towns In Neometropolitan Development In India Amit Chatterjee 9789811932052 , Sustainable By Design Walker 9781032973685 , Management Of Quality In Construction Ashford 9781138607163 , Disaster Managament 2/Ed Pandey 9789357461610 , Remote Sensing And Image Interpretation Thomas Lillesand 9789354642104 , Composite Structures Of Steel And Concrete 3Ed Johnson 9788126539819 , Strength Of Materials 2Nd/Ed Debabrata Nag 9788126534876 , Reasoning Ability And Quantitative Aptitude Tcy Online 9788126559008 , Green It Strategies And Applications Using Envir Intell Bhuvan Unhelkar 9781032054025 , Bioenergy For Sustainability And Security Behera 9789381891438 , Textbook Of Engineering Geology Annadurai 9789385259937 , Structural Dynamics Mukhopadhyay 9788180520907 , Matrix And Finite Element Analysis Mukhopadhyay 9788180520754 , Irrigation Engineering & Hydraulic Structures Suresh 9789383656899 , Strength Of Materials 2Ed Vendateshan 9789383656646 , Concrete Technology Job Thomas 9788131526682 , Steel Design Segui 9788131526651 , A First Course In The Finite Element Methods Logan 9789353507855 , Civil Engineering Materials Sivakugan Tuladhar 9789386650382 , Soil And Water Conservation Engineer Fangmeier 9788131524985 , Principles Of Foundation Engineering 9Th Ed Das 9789355738110 , Elements Of Civil Engineering Balasubramanya 9789387511576 , Soil Mechanics & Foundation Engineering Huat Prasad 9788131529591 , Principles Of Foundation Engineering Das 9789386650955 , Analysis Of Structures On Elastic Tsudik 9788131518953 , Strength Of Materials : Mechanics Gupta 9789355737717 , Steel Design With Mt Segui 9789386650887 , Prestressed Concrete Structures, 6Ed Dayaratnam 9788120417915 , Fundamentals Of Reinforced Cement Concrete Designs Gahlot 9789385915611 , Instrumental Methods Of Analysis Willard 9788123909431 , Tb Of Soil Mechanics And Foundation Engineering:Geo Technical Engg Murthy 9788123913629 , Civil Engineering Through Objective Type Questions 3Ed Gupta 9788123907970 , Advanced Reinforced Concrete Design 3Ed Raju 9788123929606 , Design Of Reinforced Concrete Structures 4Ed Dayaratnam 9788120414198 , Structural Dynamics Paz 9788123909783 , Modern Prestressed Concrete Libby Bks465269 , Textbok Of Solid Wastes Managemnt Khan 9788123909448 , Analysis & Design Of Substructures, 2Ed Swami Saran 9788120417007 , Building Repair And Maintance Management Gahlot 9788123912431 , Advanced Foundation Engineering Murthy 9788123915067 , Modern Construction Management 7Ed Harris 9788126572298 , Groundwater Hydrology Rushton 9788126539772 , Textbook Of Highway And Traffic Engineering Saxena 9788123924175 , Airport Engineering Saxena 9788123915500 , Construction Dewatering And Groundwater Control 3Ed Powers 9788126541669 , Quality Management Of Cement Concrete Construction (Pb) Gahlot 9788123916989 , Tb Of Water Supply And Sanitary Engineering Husain 9788120416833 , Design Of Bridges 5Ed Raju 9788120417984 , Essentials Of Bridge Engineering 6Ed Victor 9788120417175 , Building Construction Handbook Chudley 9789381269169 , Design And Construction Of Concrete Shell Roofs Ramasamy 9788123909905 , Strength Of Materials, Vol-Ii:Advanced Theory And Problems Timoshenko 9788123910772 , Construction And Project Managment 2Ed (Pb 2018) Krishnamurthy 9789386217790 , Water And Wastewater Calculations Manual 2Ed Lin 9789353162863 , Design Of Stell Structures Abu-Saba 9788123905389 , Prestressed Concrete Problems And Solutions Raju 9788123925424 , Water Resources And Irrigation Engineering Ganesaguru Bks588955 , Dam Engineering Asthana 9789381891469 , Sedimentary Rocks In The Field A Colour Guide Stow 9781874545699 , Soil Mechanics Basic Concepts & Engineering Aysen 9780415383936 , A Tb Of Fluid Mechanics And Hydraulic Machines Bansal Bks493063 , Intelligent And Sustainable Cement Production Chatterjee A.K. 9781032728445 , Total Quality Management 5Ed Besterfield 9789353066314 , Matrix Methods Of Structural Analysis Kothandaraman 9789357059190 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Limit State Design Of Steel Structures Duggal 9789353164874 , Schaums Outline Of Reinforced Concrete Everard 9789389538656 , Earthquake Resistant Design Of Structures Agarwal Bks344533 , Building Materials Varghese 9788120350915 , Total Quality Management 2Ed Mukerjee 9788119364299 , Principles Of Geotechnical Engineering 10 Th Ed Das 9789355738103 , Building Materials Products Properties And Systems Gambhir 9780071077606 , Gate 2025 Civil Engineering - Guide By Gkp C L Educate 9789356817593 , Gate 2025 Mechanical Engineering Guide Gkp 9789356817746 , Engineering Design Dieter 9789355322258 , Economics And Principles Of Management Vinoth Kumar 9788194244646 , Vector Mechanics For Engineers Dynamics Beer 9789353166656 , Aviation Maintenance Management Kinnison 9780071076838 , Theory Of Machines S S Rattan 9789353166281 , Turbomachinery Dubey 9789353161156 , Engineering Mechanics 4/E Kumar 9780070681811 , Modern Compressible Flow: With Historica Anderson 9789355320070 , Programming In Matlab Patel Mittal 9789332524811 , Finite Element Analysis Moaveni 9788131760642 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Additive Manufacturing And 3D Printing Technology Awari Thorat 9781041049562 , Practical Guide To Vehicle Refinishin Woodstock 9781032963570 , The Internet Of Mechanical Things The Iot Framework Sami Salama Hussen 9781041038573 , Energy Storage Systems And Components Alfred Rufer 9781041049470 , Metal Cutting Theory & Practice Stephenson 9780824758882 , Classical Mechanics Problems And Solutions Carolina C Llie 9781032983608 , Product Design Baxter 9781032967882 , Thermal Measurements & Inverse Tech Orlande 9781439845554 , The Induction Machines Design Handbook Boldea Bks331229 , Modeling And Control Of Engineering Systems Clarence W. De Silva 9781420076868 , Fundametals Of Production Planning And Control Chapman 9788131717394 , Applied Thermodynamics For Engineering Technologist 5Ed Eastop 9788177582383 , Classical Mechaincs Goldstein 9788131758915 , Introduction To Robotics Saha 9789355326461 , Thermodynamics-Basc And Applied Ganesan 9789353161279 , Ethics In Engineering 5/Ed Martin 9789355325075 , Digital Marketing Chaarlas 9788119243983 , Non Conventional Energy Resources Khan 9789352601882 , Supply Chain Logistics Management Bowersox 9789353162580 , Mechanical Metallurgy Appuraj Thiyagrajan Deiter 9781307834840 , Schaums Outline Of Continuum Mechanics Mase 9789389691283 , Schaums Outline Of Statics And Mechanics Of Materials Nash 9789389691399 , Maleev & Hartmans Machine Design 6Ed Grover 9788123926322 , Mass Transfer Theory And Applications Narayanan Bks440952 , Manual Of Fire Safety Prakash 9788123919904 , Gpropulsion Systems For Space Applications Satyanarayana 9789395038553 , Mechanics Of Materials Si Version 5Ed Philpot 9789354643293 , Introduction To Robotics 3/Ed Niku 9789357461306 , Advanced Mechanics Of Materials 6Ed Boresi 9788194726395 , Design And Analysis Of Experiments Douglas & Montgomery 9788126540501 , Machine Component Design Robert C.Juvinall 9788126559732 , Callisters Materials Science And Engineering, 2Nd Ed Balasubramaniam 9788126541607 , Process Dynamics And Control 4Ed Dale Seborg 9789354248429 , Engineering Optimization Theory And Practice 5Ed Rao 9789357461238 , Principles Of Modern Manufacturing Si Version Groover 9788126573059 , Convective Heat And Mass Transfer South Asian Edi Mostafa Ghiassiaan 9781107511811 , Continuum Mechanics Jog C S 9781108437141 , Singers Engineering Mechanics Statics & Dynamics ( Si Units ) 3Ed Vijay Kumar 9788178002194 , Analytical Mechanics Fowles 9788131501115 , Thermal Sciences Potter Scott 9788131529461 , Physical Metallurgy Principles Abbaschian 9788131520697 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Computational Fluid Dynamics & Heat Ghosh Dastidar 9788131533079 , Internet Mrketing With Mt Zahay 9789355734570 , Mechanical Vibrations Theory And Applications Kelly 9788131526033 , Mechanics Of Materials, Enhanced Edi Goodno--Gere 9789355737847 , Fundamentals Of Mechatronics Jouane 9788131526026 , Mechanics Of Materials Strength Of Materials Pilli/Bala 9789386668509 , Workshop Manufacturing Practices Ai Juneja 9789387994614 , The Finite Elements Methods - Its Basis & Fundamentals 7/Ed Zienkiewiez 9789351071587 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , The Robotic Process Automation Handbook : A Guide To Implementing Ri Systems Taulli 9781484275306 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Industry 4.0 : The Industrial Internet Things Gilchrist 9781484249703 , The Finite Element Method A Practical Course 2Ed Liu 9789351071594 , Elasticity-Theory, Applications & Numerics 2Ed Sadd 9789351072270 , Energy Resources And Their Utilisation R.K. Khitoliya 9789394917040 , Workshop Theory And Practice Delilah Sam 9788119365098 , New Persp. In Hybrid Vehicle Technology Samual Rodrigues 9788119365418 , Natural Gas Engineering Selvin 9788119365197 , Machine Shop Theory Samual Rodrigues 9788119205639 , Applied Mechanics Laboratory Samual Lobo 9788119365760 , Robotics: Emerging Opportunities Adrian Dsilva 9788119523702 , Advances In Hypersonic Vehicles Samual Rodrigues 9788119365500 , Machine Elements Samual Rodrigues 9788119205691 , Work And Energy Parth Chavda 9788119365234 , Design Thinking : A Comprehensive Textbook Tiwari 9789357468640 , Welding Technology Sanfras Monteiro 9788119523023 , Combustion Engineering Samual Rodrigues 9788119205943 , Fluid Machinery Noel Vincent 9788119365029 , Renewable Energy Roy 9789384007157 , Engineering Graphics Using Autocad 7/Ed {Pb} Elanchezhian C 789387938564 , Introduction To Micromachining 2Ed Jain 9788184873610 , A Systems Approach To Automotive Technology Erjavac 9788131512111 , Emotionally Intelligent Design Pavliscak 9789352138029 , Mechanics Of Solids Binu Sivakumar 9789380381671 , Mechanics Of Solids Christian Johnson 9789385983085 , Jet Engines Jaganathan 9789380381497 , Essentials Of Management, 11Ed Koontz 9789353168148 , Disaster Management Subramanian Bks481407 , Engineering Fluid Mechanics Kumar Bks613447 , A Textbook Of Fluid Mechanics Rajput Bks648302 , A Textbook Of Thermal Engineering ( Lpspe ) Khurmi Bks613483 , Materials Science And Engineering Raghavan 9788120350922 , Engineering Economics 2Nd Ed Panneerselvam Bks661039 , A Tb Of Theory Of Machine Gupta R Khurmi Bks408347 , Energy Security And Sustainability Shukla A. 9781032728926 , Mechanical Engineering Jain Bks554131 , Engineering Materials And Metallurgy Annamalai 9789386235046 , Kinematics Of Machinery Baskar Bks462932 , Thermal Engineering Swaminathan Bks638475 , Engineering Materials And Metallurgy Baskar Bks638439 , Lean Manufacuring Kalyana Chakravarthy Bks638464 , Elements Of Mechanical Engineering Singh Bks448529 , Fundamentals Of Manifacturing Engineering Singh 9789380156002 , Strength Of Machine Elements Ghorpade 9789384726003 , Observability Engineering Achieving Production Excellence Majors 9789355422996 , Research Methodology 5Ed Kothari 9789389802559 , The Automotive Body Vol 2 Morello 9788132208884 , Kinematics Of Machines Kumar 9789388005425 , Essentials Of Heat And Fluid Flow In Porous Media Narasimhan 9789382127215 , Analysis Of Composite Structures Decolon 9789380931463 , Theory Of Elasticity Chandramouli 9789380381633 , Principles Of Composite Material Mechanics 3Ed Gibson Bks380369 , Introduction To Combustion Engineering Basic And Applied Amitava Sarkar 9789357053129 , Textbook Of Finite Element Analysis Seshu Bks414440 , Engineering Thermodynamics Savithiri Bks442773 , Automobile Engineering Vol-Ii Kirpal Singh 9788180142512 , An Introduction To Mechanical Engine 4Ed Wickert Lewis 9789353507473 , Welding Engineering & Technology Parmar Bks53191 , Manufacturing Technology Vol 1-Foundry Forming Rao 9789353160500 , Manufacturing Technology Singh 9789381162385 , Dynamics Of Machines Balaguru 9789386668608 , Unconventional Machining Vivekanandhan Bks613041 , Basic Civil And Mechanical Engineering Shanmugam 9789355329547 , Engineerin Drawing 2Ed Shah / Rana 9788131710562 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Fuel Cell Technology Handbook Hoogers Bks333321 , Robots And Robotics Miller 9789387572966 , Non Destructive Testing And Materials Vivekanandhan Bks476859 , Engineering Mechanics Nelson 9780070146143 , Engineering Tribology 4Ed Stachowiak 9789351071679 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Automobile Engineering Ayyappan Karthikeyan Bks464418 , Thermal Engineering Swaminathan Bks638475 , Automobile Engineering Babu Singh Bks587323 , A Textbook Of Production Technology Sharma Bks479783 , A Textbook Of Mechatronics Rajput Bks554009 , Automobile Engineering Jain 9780070445291 , Engineering Mechanics Statics & Dynamics Khanchani 9788180521089 , Basic Mechanical Engineering Prabhu 9788183715737 , Powder Metallurgy Ramakrisnan 9789381714485 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Switching And Finite Automata Theory Jha 9780521176804 , Introduction To Mechanics 2Nd Ed Mahendra K Verma 9788173719813 , Basic And Applied Thermodynamics - A Ready Recknor Bhat 9789388005074 , Basic Refrigeration And Airconditioning 4Ed Ananthanarayanan 9781259062704 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Mechatronics Sathish Kumar Bks476759 , Automobile Engineereing Vol I Singh Bks247106 , Process Planning And Cost Estimating Selvakumar Bks480422 , Non Conventional Energy Resources Sawhney 9788120346093 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Introduction To Micromachining 2Ed Jain 9788184873610 , Vector Mechanics For Engineers Statics/Dynamics (Sie) Beer 9789353166625 , Fluid Mechanics &Hydraulics Rev &Updated Edn Ukarande 9789381162538 , Mechanical Measurements - Revision 6Ed Beckwith 9789353945633 , Vibration Monitoring Testing And Instrumentation C W.De Silva 9781032292137 , A Treatise On Turbomachines Gopalakrishnan Bks321517 , Construction Materials Vs Karthikeyan Bks476834 , Design Of Machine Elements Bhandari 9789390177479 , Mechanical Vibrations Bhava 9788131732489 , Design Of Transmission Systems Baskar Bks476758 , Engineering Materials And Metallurgy Baskar Bks638439 , Manufacturing Technology Vivekanandhan Bks638476 , Design Of Machine Elements Arunraja Bks638441 , Mechanical Vibrations Nag 9788126530908 , Power Plant Engineering Dhanasekar Bks505300 , Statistical Quality Control A Modern Introduction 6Ed Montgomery 9788126525065 , Additive Manufacturing Technologies Shiva Ahuj Shukla 9789357462419 , Hydraulics And Pneumatics Dixon Bks638479 , Engineering Principles Of Ground Modification Hausman 9789351341871 , Engineering Thermodynamics 6Ed Nag 9789352606429 , Refrigeration And Air Conditioning Arora 9789390385843 , Enterprise Resource Planning 4Th Edn Leon 9789353167820 , Foundations Of Material Science And Engg 6Th Edn Smith 9789355322173 , Shigleys Mechanical Engineering Design Budynas 9789390219636 , General Studies Paper - I ( 2025 ) Mhe 9789355327796 , Erp Demystified 3/Ed Leon 9789383286676 , Heat And Mass Transfer 6Ed Cengel 9789390185283 , Engineering Noise Control: Theory And Practices 4Ed Bies 9780415487078 , Rapid Prototyping And Engineering Applications Frank W.Liou 9781138569577 , Strength Of Materials Vol Ii Binu Sukumar 9789388005418 , Mechatronics A Foundation Course Clarence W.De Silva 9781138569553 , Design And Analysis Of Randomized Algorithms Hromkovic 9788132231592 , Metrology And Measurements Annamalai 9789388005463 , Fluid Mechanics And Machinery Molykutty 9789391549725 , Micro Electro Mechanical System Design Allen 9780824758240 , Micromachining Of Engineering Materials J Mcgeough 9781032419794 , Gas Turbine Combustion-3 Rd Ed Lefebvre 9781138569584 , Ergonomics Laboratory Exercises Joseph Gallwey 9781032973005 , Introduction To Biofuels Mousdale 9781439812075 , Environmental Engineering Charles Monteiro 9788119205509 , Power Plant Engineering Lijo Thomas 9788119365036 , Industrial Engineering Richard Carvalho 9788119205523 , Design & Operation Of Heat Exchanger Gerhard Rott 9788119365425 , Hydro Power Gerhard Rott 9788119205912 , Air Conditioning And Ventilation Systems Lijo Thomas 9788119365401 , Materials Science And Engineering Raghavan 9788120350922 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , Design Management : Create, Develop And Lead Effective Design Teams Picchi 9781484283615 , Heat And Mass Transfer 2Ed Karwa 9789811926099 , Testing Of Metallic Materials 2Ed Suryanarayana 9788178001340 , Introduction To Engineering Materials 2/Ed Murray George 9781032530772 , Mechanics Of Composite Materials 2/Ed Jones R.M 9781138571075 , Reliability Evaluation Of Enginnering Systems 2Ed Billinton 9788181285522 , Workshop Practice Manual 6/Ed Reddy 9788178003078 , Finite Element Analysis 2D Lakshmi Narasai 9789389354225 , Engineering Mechanics Pb Lakshmi 9789390211609 , Engineering Mechanics 2Ed Harbola 9788131518298 , Environmental Science And Engineering Rajesh Gopinath 9789387511569 , Materials Science And Engineering Periodical Renewal Gilmore 9788131520451 , Environmental Science With Mt 16 Th Ed Miller 9789355738899 , Fluid Mechanics Munson Huebsch 9788126553433 , Engineering Mechanics: Dynamics, Si Version Meriam Bolton 9788126565375 , Engineering Mechanics Statics And Dynamcs James Meriam Kraige 9789354248566 , Engineering Fluid Mechanics Elger 9788126564491 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Machine Design Data Book Ramana 9789387593879 , Heat Transfer Alan 9789332575066 , Theory Of Machines 3Ed Bevan 9788131729656 , Introduction To Enviromental Engineering And Science Masters 9789332549760 , Heat And Mass Transfer Mayilsamy 9788131733837 , Engineering Thermodynamics 4Ed Rogers 9788131702062 , Operations Research :An Introduction-10Th Ed Hamdy Taha 9789352865277 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Automation, Production Systems, And Computer - Integrated Manufacturing 5Th Ed Groover 9789361592959 , Introduction To Materials Science For Engineers 9E/D Shackelford 9789357059978 , Fundamentals Of Engineering Drawing Luzadder 9789332549982 , Engineering Materials Properties And Selection 9Ed Budinski Naraimhulu 9789332574045 , Thermodynamics Rajadurai Bks471287 , Environmental Science And Engineering Kaushik 9788122436471 , Engineering Optimization 4Ed Rao 9789395161800 , Cad/Cam/Cim 5Ed Radhakrishnan 9789395161855 , Finite Element Analysis With Ansys Workbench Tickoo 9789355513007 , Industrial Waste Management Mathankumar Bks480053 , Metrology And Measurements Vivekanandan Bks638442 , Finite Elements Analysis Baskar Bks534307 , Environmental And Agriculture Kavitha Bks638465 , Energy Materials Bandarenka A.S 9781032530789 , Digital Twin Ranjan Ganguli 9781032934198 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Quantum Computation Helmut Bez 9781032983738 , Wind Electrical Systems Bhadra, 9780195670936 , Metal Fatigue In Engineering Stephens 9788126539215 , Introduction To Industrial Internet Of Things And Industry 40 Sudip Misra 9781032146751 , Sustainable Manufacturing For Industry 4.0 Jayakrishna K. 9781032728728 , Reverse Supply Chains: Issues And Analysis Gupta S.M. 9781032729039 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Gas Turbine Heat Transfer Cooling Je-Chin Han, Sandip Dutta 9781439855683 , First Course In Aerial Robots And Drones (A) Bestaoui Sebbane 9781032963518 , Handbook Of Induction Heating Rudnev 9780824708481 , Fracture Mechanics (Forth Ed) T.L Anderson 9781032292120 , Fire Safety Engg Design Of Structures, 2Ed Purkiss 9788131220085 , Future Energy Improved Sustainable And Clean Opitons Letcjer 9788131220849 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Fundamentals Of Gas Dynamics Babu 9781910390009 , Fundamentals Of Propulsion Babu 9788180522529 , Engineering Metrology 3Rd Ed Narayana Bks396066 , Engineering Mechanics Kumaravelan Bks315205 , General Aptitude For Competitive Examinations Pattanaik Bks670722 , Dictionary Of Heat Power Engineering Ramalingam 9789386923035 , Environmental Pollution Principles Narayana Bks353570 , Production Processes Luqman 9788123918983 , Tractors And Their Power Units, Hb Lijiedahal 9788123905013 , Metal Cutting Principles Shaw 9788123901367 , Sheet Metal Press Tools Design And Making A Practical Approach Luqman 9788123925134 , Solid State Physics Wahab 9788184877786 , Practical Non - Destructive Testing, 3Ed Baldev Raj 9788173197970 , Mechanics Of Machines, 3Ed Ramamurti 9788173198922 , Handbook On Quality And Productivity Improvement Of Concrete Nayak 9788184876390 , Environmental Studies 4Ed Rajagopalan 9789354978944 , Finite Element Methods Dhanraj 9780198073901 , Fluid Dynamics Raisinghania Bks320511 , Entrepreneurship 11/Ed Hisrich 9789390113309 , Thermodynamics 9Th Ed Cengel 9789353165741 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Vibration, 4/E Inman 9789332518483 , Thermodynamics 9Th Ed Cengel 9789353165741 , Schaums Outline Of Mechanical Vibration Graham Kelly 9789389538861 , Enterprise Resource Planning Singla 9789360531485 , Machine Drawing 51Ed Bhatt 9789385039560 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Total Quality Management 2Ed Mukerjee 9788119364299 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Operations Research Panneerselvam 9789354437892 , Design Thinking Teun Den Dekker 9781032786018 , Aeroplane Ramalingam 9788193103159 , Faqs In Control Systems Engineering Pattanaik 9789394639003 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Total Quality Management 5Ed Besterfield 9789353066314 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Engineering Drawing Agrawal 9789353167448 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Power Plant Engineering Hegde 9789332534100 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Alternative Fuels For Ic Engines Krishnasamy 9789364441995 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Engineering Drawing Agrawal 9789353167448 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Industrial Robotics Control Frigeni 9781484294154 , Gate 2025 Production And Industrial Eng Gkp 9789356818170 , Engineering Vibration, 4/E Inman 9789332518483 , Fundamentals Of Engg Heat And Mass Transfer-5Ed Sachdeva 9789386070968 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Modern Machining Processes Pandey 9789386761835 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Textbook Of Fluid Dynamics Chorlton 9788123908816 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Robotics Rajmohan Bks480419 , Hmt Data Book Kothandaraman 9788812243594 , Design Data (Data Book) Psg Bks58578 , Digital Signal Processing 2Ed Paulo Diniz 9781108406703 , 8086 Microprocessor And Applications 3Ed Kani 9789354661327 , Wireless Telecommunication System & Network Mullett 9788131520123 , Operational Amplifiers & Linear Integrated Circuits Lal Kishore 9788177585667 , Mobile Computing Principles Bfar 9780521696234 , Microprocessors & Programmed Logic 2Ed Short 9788131709160 , Design With Pic Microcontroller Peatman 9788177585513 , Digital Systems Design With Access Code Nagoor Kani 9789354667688 , Introduction To Biomems Folch 9781032568225 , Introduction To Biomedical Equipment Technology 4Ed Carr 9788177588835 , Antennas & Wave Propagation Raju 9788131701843 , Raspberry Pi For Dummies Cook 9789357460422 , Digital Signal Processors : Architectures --Op Kuo 9788131717936 , Principles Of Electromagnetics, 6Ed Sadiku 9780199461851 , Advanced Digital Design With The Verilog Michael.D.Ciletti 9789332584464 , Neural Networks Kumar 9781259006166 , Embedded System 2Nd Ed Peckol 9789357463966 , Microprocessor And Peripherals Chowdhury Bks405737 , Networks & Systems Roy Choudhury 9789389802535 , Microcontroller Theory And Application With The Pic Rafiquzzaman 9788126548354 , Digital Signal Processing For Anna University Kani 9789354661006 , Digital Signal Processing 3Ed Kani 9789354661167 , Analog And Pulse Circuits Lakshmaiah D 9789389354201 , Electronic Devices And Circuits Orient 9789386235305 , Quantum Chemistry 7 Ed Levine 9789332558533 , Engineering Circuit Analysis 9/Ed Hayt 9789390185139 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Chip Design For Submicron Vlsi : Cmos Layout And Simulation Uyemura 9788131501955 , Microelectronics Neamen 9789354601637 , Neural Networks And Learning Machines Haykin 9789332570313 , Electronic Circuits : Fundamentals And Applications 5Ed Tooley 9781032726687 , A Course In Digital Signal Processing Pucca Bundh Porat 9788126534913 , Signals And System Apte 9781316615393 , Digital Design 6Ed Mano 9789353062019 , Principles Of Signal Processing And Liner System Lathi 9780198062288 , Fiber Optic Communications 5Ed Palais 9788131717912 , Circuits And Networks Sudhakar 9789339219604 , Introduction To Communication Systems Madhow 9781316608241 , Analog Communication Rao 9780070704800 , Arduino Based Embedded Systems Singh 9781032964058 , Next Generation Wireless Lans 2Nd Ed Perahia 9781107414617 , Arm Microprocessor System Tahir 9781138387539 , Digital Communication Mutagi Bks478677 , Advanced Microprocessors & Peripherals Bhurchandi 9781259006135 , Vlsi Design Chitra 9788183716598 , Television And Video Engineering Salai Thillai 9788183712194 , The Design Of Cmos Radio Frequency Integrated Circuits Lee 9780521613897 , Network Security : Private Communication In A Public World Charlie Kaufman 9788196874339 , Sensors And Transducers Patranabis 9788120321984 , Neuro Fuzzy And Soft Computing Jang Sun Mizutani 9789332549883 , Network Analysis Channa Venkatesh 9788131533215 , Circuits Carlson 9788131505861 , Op Amps And Linear Integrated Circuits : Concepts And Applications Fiore 9788131512340 , Mobile Computing Principles Bfar 9780521696234 , Instrumental Methods Of Analysis Willard 9788123909431 , Vlsi Circuits And Embedded Systems Hasan Babu 9781032906003 , Computer Organization And Embedded System-6 Th Ed Hamacher 9789339218317 , Network Analysis And Synthesis, 2Ed Singh 9789353166724 , Handbook Of Biomedical Instrumentations Khandpur 9789355328021 , Security And Privacy In Internet Of Things Lots Hu Fei 9781032707150 , Television & Video Engineering Veeralakshmi 9789380156699 , Power Quality Sankaran 9781138569249 , Introduction To Microcontroller Programming For Power Electronic Control Applications Rossi 9781032972183 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Signal Processing And Its Applications Senthil Kumar 9788195268726 , Multimedia Enabled Sensors In Iot Fadi 9781032599205 , Novel Wearable Antennas For Communication And Medical System Albert Sabban 9781041049579 , Internet Of Things Using Single Board Computers : Principles Of Iot And Python Programming Kanagachidam Baresan 9781484299258 , Handbook Of Optical Communication Networks Ilyas 9781498798037 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Watermarking And Steganography 2Nd Edition Shih 9781032972121 , Propagation Handbook For Wireless Communication System Design Crane 9780849308208 , The Internet Of Things In The Cloud Honbo Zhou 9781498770354 , Arduino Based Embedded Systems Singh 9781032964058 , 5G Mobile Communications Concepts And Technologies Saad Asif 9781032663159 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Semiconductor Physics And Devices, 3Ed Sze 9789354243226 , Digital Fundamentals 11Ed Floyd 9789332584600 , Electronic Devices And Circuits--11 Ed Boylestad Nashelsky 9789332542600 , The 8051 Microcontrollers & Embedded Systems 2Ed Mazidi 9788131710265 , A System C Primer 2Ed Bhasker 9788178001418 , Household Electricity And Appliances P.B Bhagava 9789390211265 , Image Processing Analysis And Mach Sonka 9789386858146 , Verilog Hdl 2Ed +Cd Palnitkar 9788177589184 , Modern Semiconductor Devices For Integration Hu 9788131730249 , Analog Integrated Circuit Design Isv 2Nd Ed Chan Carusone 9788126543939 , Textbook Of Digital Electronics Vasudevan 9789381714539 , Microwave Engineering 4Ed Das 9789390113347 , Analysis Of Microcontrollers For The Students Kothari 9789381714294 , Digital Signal Processing : For C.S.I.T Palani 9789380618388 , Fundamentals Of Digital Images Processing Jain 9789332551916 , Signals And Systems Sreenivasa Reddy 9789389354041 , Satellite Communications Pratt 9789354243035 , Analog Signals And Systems Kudeki 9788131787984 , Embedded Systems Handbook 2Ed System Design And Verification Zurawski Bks331222 , Vlsi Design And Eda Tools 2Nd Ed Sarkar 9788183714976 , Vlsi Design Das 9780198094869 , 8085 Microprocessor Pramod Borole 9789382127581 , Fundamentals Of Communication Systems Proakis 9788131705735 , Short Range Wireless Communication 3Ed Bensky 9789351073994 , Introduction To Fiber Optics Ghatak Ajoy 9781316644010 , The Definitive Guide To Arm Cortex M3 And Cortex M4 Processors Yiu 9789351071754 , Rf Circuit Design Ludwig 9788131762189 , Electric Circuits For Be/Betch 2Ed Kani 9789354663925 , Control Systems Nagoor Kani 9789389239010 , Digital Logic Circuits Nagoor Kani 9789354669989 , Microwave And Rf Design Steer 9789380381305 , Electrical Measurement And Measuring Instruments Rajput Bks543993 , Digital Signal Processing 3Ed Kani 9789354661167 , A Handson Course In Sensors Using The Arduino And Raspberry Pi Ziemann Volker 9781032791470 , Signal And Systems Simplified 2Ed Nagoor Kani 9789354661013 , Basic Electrical And Electronics Engineering 2/Ed Bhattacharya 9789332586505 , Ad Hoc Wireless Networks : Architectures & Protocols Murthy 9788131706886 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Digital Circuits Design Kothari 9789332543539 , Solid State Electronic Devices Streetman 9789332555082 , Wireless Communication Goldsmith 9780521704168 , Probability And Stochastic Processes 3Ed Yates 9789354243455 , Signals, Systems And Inference Oppenheim 9789356064676 , Electromagnetic Field And Waves Salivahanan 9788119896677 , Analog Design For Cmos Vlsi Systems Maloberti 9788181284341 , Vlsi Design Michael 9780849318764 , Cognitive Sensors And Iot Fadi 9781032599236 , Digital Design & Computer Organization Farhat 9780849311918 , Digital Intergrated Circuits Evegni 9780849330575 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Basic Electrical And Electronics Engineering Murugan 9789384726072 , Adaptive Antenna Arrays Chandran 9788181289322 , Networks Lines & Fields 2Ed Ryder 9789332559516 , Data Compression : The Complete Reference Salomon 9788184898002 , Electric Circuits Bell Bks321194 , Digital Signal Processing Oppenheim 9789332550339 , Iot Standards With Blockchain : Enterprise Methodology For Internet Of Things Upadrista 9781484284278 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Digital Signal Processing Oppenheim 9789332550339 , Digital Modulation & Coding Wilson 9788131721438 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Biomedical Instrumentations And Measurements Cromwell 9789332556911 , Artificial Neural Networks For Engineers And Scientists Chakraverty S. 9781032729121 , Digital Communication Bhattacharya 9780070591172 , Signals And Systems 2/Ed Oppenheim 9789332550230 , Fundamentals Of Modern Vlsi Devices Yuan Taur 9781316649794 , Digital Systems:Principles&Design(Anna) Rajkamal 9789332535916 , Principles Of Cognitive Radio Vincent 9781107439900 , Digital Signal Processing 4Ed Proakis 9788131710005 , Op Amps And Linear Integrated Circuits Gayakwad 9789353949037 , Microwave And Radar Engineering Rao 9788131799444 , Introduction To Pspice Using Orcad For Circuits And Electronics Rashid 9789332555174 , Basic Electronics Saha 9781316632932 , Linear Integrated Circuits Salivahanan 9789353163808 , Principles Of Electronic Communication Orient 9789386235107 , Optoelectronic Devices And Optical Fiber Communication Chakrabarti 9789354667947 , Introduction To Vlsi Design Flow Sneh Saurabh 9781009200813 , Antennas And Wave Propagation Kraus 9789352606184 , Network Analysis Revised 3Ed Van Valkenburg/ Rathode 9789353433123 , Communication Systems : Analog And Digital, 3Rd Singh 9781259004605 , Internet Of Things The : How Smart Tvs Sm Miller 9789332552456 , Microwave Devices & Circuits 3Ed Liao 9788177583533 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , 5G Mobile And Wireless Communication Technology Pauline Cullen 9781009590921 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Circuits Analysis Theory And Practic Robbins 9788131519028 , Medical Instrumentation 5Ed : Application And Design : An Indian Adaptation Webster 9789354249150 , Microwave Engineering, An Indian Adaptation Theory And Techniques Pozar 9789388991087 , Wireless Communications 2Ed Molisch 9789354248795 , Controll System Eng. 8/Ed Norman 9789357463980 , Signals, Systems, And Transforms, 4/E Phillips 9789332518490 , Antenna Theory And Applications 4Ed Balanis 9789354248474 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Introduction To Analog And Digital Communication 2Ed Haykin 9789354644337 , Digital Image Processing Gonzalez 9789353062989 , Power Electronics (An Indian Adaption) Ned Mohan 9789354640278 , Dorfs Introduction To Electric Circuits Wiley India Edition Richard 9788126573493 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Communication Systems 5Ed Haykin 9789354640896 , Modern Control Engineering Ogata 9789332550162 , Electric Circuits With Mt Kang 9789386650344 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Modern Digital Electronics-5Th Edtion Jain 9789355321770 , Analog And Digital Electronics Roth 9789353502355 , Introduction To Communication Systems Madhow 9781316608241 , Voip Handbook Application Technologies Ahson 9781420070200 , Embedded Systems Handbook 2Ed Network Embedded System Zurawski Bks331227 , Matlab: An Introduction With Applications 6Ed Amos Gilat 9789357462174 , Fiber Optic Communication Systems 5Ed Agrawal 9789357461245 , Crc Handbook Of Modern Telecommunications 2Ed Morreale Bks331221 , Mathematical Aspects Of Signal Processing Sircar 9781107175174 , Rf And Microwave Semiconductior Device Handbook Golio 9780849315626 , Electronic Systems Maintenance Handbook, Second Edi Whitaker Bks322864 , The 8051 Microcontroller Ayala 9788131502006 , Digital Systems Design Using Vhdl W/ Roth 9788131518304 , Fundamentals Of Engineering Electromagnetics Cheng 9789332535138 , Basic Electronics-2Ed Kothari 9789352606467 , Power Electronics Essentials & Applications Umanand 9788126519453 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Automotive Embedded Systems Handbook Navet Bks335190 , Wavelet Analysis With Applications To Image Process Prasad 9780849331695 , Primer On Wavelets And Their Scintific Applications Walker 9781032963617 , Face Detectin And Recognition: Theory And Practice Datta A.K. 9781032728964 , Fiber Optics & Optoelectronics Khare 9780195669305 , Mobile Cellular Telecomm 2E Lee 9780070635999 , Cmos Vlsi Design : A Circuits And Systems Perspective, 3Ed Weste 9788131762653 , Antennas Blake 9789380381268 , Mobile Communications, 2Ed Schiller 9788131724262 , Introduction To Wireless Systems Black 9788131726389 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Linear Integrated Circuits Sathishkumar Bks476847 , Linear Integrated Circuits Dhanasekar Bks638493 , Embedded And Real Time Systems Ramprabu Bks476848 , Transmission Lines And Rf Systems Shanmugaraja Sivakumar Bks490771 , Transmission And Distribution Gayathri Bks476751 , Wireless Communication Santhosh Krishna Bks638491 , Digital System Design Edwindhas Bks638462 , Power Quality & Distributed Generation Jayaprakash 9788184876987 , Digital Signal Processing Antoniou 9780070636330 , Power System Engineering 3 Ed Kothari 9789353165116 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Principles Of Electronic Materials Kasap 9789390113866 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Principles Of Electronic Materials Kasap 9789390113866 , Wireless Communications : Principles Rappaport 9789356066212 , Communication Networks Fundamentals Leon 9780070595019 , Interoperability In Iot For Smart Systems Roy M. 9781032728100 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Learning Basics And Electronic Science Through Mcqs Priya 9789394639249 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Programmable Logic Controllers 6Th Ed Petruzella 9789355325860 , Modern Wireless Communication Haykin 9788131704431 , Signals And Systems 5Ed Ramesh Babu Bks505218 , Digital Signal Processing Ramesh Babu Bks503977 , Digital Image Processing 2Ed Sridhar Bks643706 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Wireless Communications : Principles Rappaport 9789356066212 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Phyiscs For Electronics & Information Science Palanisamy 9789386923134 , Vlsi Design Sathyah Bks665018 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Communication Networks Fundamentals Leon 9780070595019 , Linear Integrated Circuits Salivahanan 9789353160487 , Wireless Communications : Principles Rappaport 9789356066212 , Linear Integrated Circuits Salivahanan 9789353160487 , Digital Logic & Computer Design Mano 9789332542525 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Applied Machine Learning Gopal 9789354601590 , Essentials Of Digital Signal Process Using Matlab Ingle/Proakis 9788131517727 , Arm System On Chip Architecture Furber 9789332555570 , Smart Grid In Iot Enabled Spaces Fadi Ai Turjman 9781032598543 , Power Plant Engineering Nag 9789354600050 , Mathematical Analysis A Straightforward Binmore 9781107526235 , Algebra 2Nd Edition Michael Artin 9789353432751 , Discrete Mathematics Dhami 9780199452798 , Statistics And Numerical Methods 10Ed Vijayakumari 9789356062733 , Algebra, 3Ed Sahai 9788173198250 , Algebraic Topology M J Greenberg , J R Harper 9780367475604 , Algebra, 4Ed Sahai 9788184876208 , Concept Of Modern Algebra Pandey 9788184877069 , Friendly Introduction To Number Theory Silverman 9789353433079 , Elementary Differential Equations 8Ed Richard 9789332571617 , Introduction To Graph Theory West 9789332549654 , Linear Algebra Ubaidullah 9789391549893 , Higher Algebra Barnard 9789385923326 , Sequences And Series Arumugam 9789388005128 , Modern Analysis Arumugam 9789388005111 , Intorduction Topology And Modern Analysis Simmons 9789387465916 , Higher Algebra Hall Knight 9788174731043 , Analytical Geometry Veerarajan 9789388005142 , Transforms And Partial Diffrential Equations 3Rd Ed Muthucumaraswamy 9789391549473 , Multilevel Analysis: Techniques And Applications 3/E Hox 9781032938035 , Thomas Calculus 15Ed Hass 9788119896608 , Calculus Vil I 2Ed ( An Indian Adaptation) Apostol 9789354642630 , Calculus 10Ed Saturmino Salas Einar Hille Ga 9789390421961 , Introduction To Linear Regresion Analysis, 6Ed Montgomery 9789357461283 , Matrices Advanced Calculus & Complex Stewart 9789360534509 , Operations Research Mote 9788126556380 , Topology 2Ed James Munkres 9789353432775 , Linear Algebra 5Ed Friedberg 9789390168132 , Multivariate Calculus Joshi Bks498996 , Mathematical Analysis 6Ed Malik Bks413195 , Stochastic Processes 5Ed Medhi 9789389802245 , Human Resource Management Aswathappa 9789355323675 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Probability And Statistics For Engineering Devore 9789353506247 , Operations Research Panneerselvam 9789354437892 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Optics 8Ed Ghatak 9789355328595 , Outline Of Beginning Physics Schaum 9789389538984 , Outline Of Astronomy Schaum 9789389538939 , Introductory Nuclear Physics 3/Ed Krane 9789354640834 , Physics Vol 2 5Ed David Halliday Resnick 9789354640438 , Physics For Scientists And Engineers Serway 9789355739223 , Non Conventional Energy Source Math 9789388005081 , Nuclear Physics Theory And Experiments 3Ed Roy 9788122449884 , Gravitation : Foundations And Frontiers (South Asian Edition) Padmanabhan 9780521178761 , Electricity And Magnetism Murugeshan 9789352837342 , Introductory Nuclear Physics Wong 9788126546060 , Modern Physics Murugeshan Bks367126 , Introduction To Electrodynamics South Asia Ed - 4/Ed David J. Griffiths 9781108822909 , Theoretical Astrophysics Vol 2 Padmanabhan 9781107400603 , Heat Thermodynamics And Statistical Physics Lal Subramanian Bks460942 , Classical Dynamic Of Particles Thornton 9788131518472 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Statistical Mechanics 2Ed (An Indian Adaption) Kerson Huang 9789354247736 , Atomic And Molecular Spectroscopy Rita Kakkar 9781108413206 , Laser Fundamentals Silfvast 9780521138475 , Engineering Chemistry 2E : Fundamentals And Applications Shikha Agarwal 9781108724449 , Organic Name Reations Sanjay Bari 9789389354737 , Basics Of Environmental Science Khosla 9788184874013 , Environmental Chemistry Singhu 9788122427318 , Biomaterials Principles And Applications Joon Park 9781032934167 , Organic Reaction Mechanisms Ahluwalia Bks366263 , Organic Synthesis Concepts And Methods 3Ed Pb 2014 Jurgen Hinri 9788126547227 , Engineering Chemistry Palanna 9789352605774 , Engineering Chemistry 2Nd Ed Wiley 9788126543205 , A Textbook Of Engineering Chemistry Dara Bks561640 , Engineering Chemistry Vairam & Kalyani 9788126543342 , Chemical Applications Of Group Theory Albert Cotton 9788194726364 , Environmental Science And Engineering Yuganath 9788183717014 , Environmental Science Isv 8Th/Ed Botkin, Killer 9788126534142 , Chemical Reaction Engineering 3Ed (An Indian Adaptation) Octave Levenspiel 9789354244605 , Outline Of Thermodynamics Schaum 9789389538540 , Textbook Of Chemical Engineering Thermodynamics Narayanan 9788120347472 , Communication Skills, 3Ed Sanjay Kumar 9789354978555 , English For Science & Technology-I Chellammal 9781009224796 , English For Science & Technology-Ii Francis 9781009251181 , Effective Technical Communication Rizvi 9789352605781 , Research Methodology Vinod 9789352863518 , Placement Interviews Skills For Success Anandamurugan 9780070700956 , Prowess Orient 9789354421242 , Research Methodology Panneerselvam 9788120349469 , Academic Writing A Handbook For Students Stephen Bailey 9781138615533 , Design Thinking In Technical Communication Jason C K Tham 9781041004356 , Principles Of Scientific And Technical Mohapatra 9789355327482 , Critical Thinking Idea Innovation And Creativity Richard H Mccuen 9781041000846 , Literature For Language Skills 2Ed Mahanand 9789388005470 , Academic Writing P.B Ajay Semalty 9789390211739 , Teaching English Through Folktales Mahanand 9789391549077 , An Introduction To Literary Studies Mario Klarer 9781032785974 , Heritage Of Tamils Muthuramalingam 9789391549718 , A Short History Of English Literature Saintsbury 9788174733054 , The English Language Wrenn 9788174733368 , An Introduction To The Study Of English Litetrature Hudson 9788174731197 , Rabindranath Tagores Ideational Challenges Bidyut Chakrabarty 9789356400122 , English Literature Long Bks476291 , Test Of Reasoning 7Th Edn Thorpe 9789389811513 , Science And Technology 8Ed Agarahri Ravi 9789355326324 , Excel Reasoning Arun Sharma 9789355329455 , Aptipedia Aptitude Encyclopedia 2 Ed Wiley 9788126569502 , Excel Quantitative Apititude Arun Sharma 9789355327970 , Verbal Ability And Reasoning For Competitive Examinations Anand Lalit Singh 9788126554294 , Intermediate Engligh Grammer With Answers, 2Ed Murphy 9788185618517 , Design Thinking Teun Den Dekker 9781032786018 , Spotting Errors Lakshminarayanan Bks670723
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
14.
Public Administrative Department #11276744 Technical Bid
Tender for Labour Engaged For Desilting,Readjustment Of Manholes Covers, Diverting The Direction Of Water Dewatering During The Execution Of Work And Disposal Away From Site. , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Meters Lead For Thickness Of Tiles Above 25 Mm And Upto 40 Mm. , Dismantling Dressed Stone Work Ashlar Face Stone Work, Marble Work Or Precast Concrete Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge , Dismantling Roofing Including Ridges, Hips Valleys And Gutters Etc., And Stacking The Material Within 50 Meters Lead. , Dismantling Of Flexible Pavement (Bituminous Courses) By Mechanical Means And Disposal Of Dismantled Material Upto A Lead Of 1 Kilometer, As Per Direction Of Engineer-In-Charge. , Dismantling Manually/ Mechanically Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge: Bituminous Road. , Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge:1:4:8 Or Leaner Mix (I/C Equivalent Design Mix) , Demolishing Lime Concrete Manually/By Mechanical Means And Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Demolishing Brick Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge:In Cement Mortar , Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge: 15.2.1 1:3:6 Or Richer Mix (I/C Equivalent Design Mix) , Demolishing Reinforced Cement Concrete Work Manually/By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Demolishing R.B Work Manually/By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil : , Earth Work In Bulk Excavation By Mechanical Means (Hydraulic Excavator) Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 M2 On Plan) Including Disposal Of Excavated Earth Lead Upto 50 Meters And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. All Kinds Of Soil : , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As10 Sqm On Plan Including Disposal Of Excavated Earth, Leadupto50meterand Lift Upto 1.5M, As Directed By Engineer-In-Charge.All Kinds Of Soil : , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres:All Kinds Of Soil : , Removal Of Excavated Mulba Dismantled Or Unserviceable Material From The Site Of Work By Mechanical Transport Or Animal Transport Or Otherwise Including Loading/Unloading(Complete Job) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 4.4.8 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts,Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchors Blocks, Plain Window Sills, Fillets Etcupto Floor V Level, Including Curing But Excluding The Cost Of Centring, Shuttering And Finishing With.1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work In Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Upto Floor Five Level Including Curing But Excluding Cost Of Centering Shuttering, Finishing And Reinforcement. 1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer- In - Charge. Note: - Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess/ Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately.All Works Upto Plinth Level , Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer- In - Charge. Note: - Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess/ Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately. All Works Above Plinth Level Upto Floor V Level , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For: Foundations, Footings, Bases For Columns , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters Buttresses, Plinth And String Course Fillets, Kerbs Andsteps Etc. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Edges Of Slabs And Breaks In Floors And Walls , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platforms. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Arches, Domes, Vaults Upto 6 M Span , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level With Cold Twisted Bar , Steel Work Welded In Built Up Sections/Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. , Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded , Providing And Laying River Bed Material On The Road Surface By Way Of Spreading The Same In Uniform Layer Not Exceeding 20Cm In Depth, Watering And Compacting With Vibratory Power Road Roller Of 8-10 Tonne Capacity Incl Carriage Of Material From Source To Site Of Work (All Leads , Lifts Complete).The Measurement Is To Be Taken Of Compacted / Finished Work. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto 1.5 M. , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M In -All Kinds Of Soil. , Providing And Fixing 60Mm Interlocked Paver Tile Over A Layer Of Cement Mortar 1:4 Mix Incl Filling Of Joints With Cement Mortar 1:3 (Complete Job) , Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Complete All As Per Direction Of Engineer-In-Charge. 80 Mm Thick cement concrete Paver Block Of M-30 Grade With Approved Color Design And Pattern. , 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Fine Sand) , 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand) , Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand) , Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level , Tile Brick Masonry With Common Burnt Clay Tile Bricks Of Class Designation 10 In Foundation And Plinth Including Curing Complete In: Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Fine Sand) , Providing And Laying Bituminous Macadam Using Crushed Stone Aggregates Of Specified Grading Premixed With Bituminous Binder, Transported To Site By Tippers, Laid Over A Previously Prepared Surface With Paver Finisher Equipped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers As Per Specifications To Achieve The Desired Compaction And Density, Complete As Per Specifications And Directions Of Engineer-In-Charge. 50 To 100 Mm Average Compacted Thickness With Bitumen Ofgrade Vg-30 @ 3.5% (Percentage By Weight Of Total Mix) Prepared In Drum Type Hot Mix Plant Of 60-90 Tph Capacity , Supplying,Stacking, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Bound Macadam (Wbm-Iii) With Graded Crushed Stone Aggregate Of Size 53Mm To 22.4 Mm In Uniform Thickness,Hand Picking , Rolling With Vibratory Roller 8-10 Tonne Capacity In Stages To Proper Grade And Camber,Applying And Brooming Requisite Type Screening / Binding Material To Fill Up Interstices Of Coarse Aggregate,Watering And Compacting To The Required Density.Complete Job , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade - Vg-30, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications. On Bitumen Surface @ 0.50 Kg/Sqm. , Hand-Packing Stones In Wire-Crates; Excluding Cost Of Crates And Stones , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade - Vg-30, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications.16.38.1 On W.B.M. @ 0.75 Kg/Sqm. , Providing And Laying Seal Coat Of Premixed Fine Aggregate (Passing 2.36 Mm And Retained On 180 Micron Sieve) With Bitumen Using 128 Kg Of Bitumen Of Grade Vg-30 Bitumen Per Cum Of Fine Aggregate And 0.60 Cum Of Fine Aggregate Per 100 Sqm Of Road Surface Including Rolling And Finishing With Road All Complete , 2.5 Cm Premix Carpet Surfacing With 2.25Cum And 1.12 Cum Of Stone Chippings Of 13.2 Mm And 11.2Mm Size Respectively Per 100 Sqm And 52 Kg And 56 Kg Of Hot Bitumen Per Cum Of Stone Chippings Of 13.2 Mm And 11.2 Mm Size Respectively Including A Tack Coat With Hot Straight Run Bitumen Including Consolidation With Road Roller Of 6 To 9 Tonne Capacity Etc. Complete (Tack Coat To Be Paid For Separately). Vwith Paving Asphalt Grade Vg-30 With No Solvent , 10Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa At 35Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Specified Tile Bricks Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finishing Neat. 12.25.1 With Common Burnt Clay (Non Modular) Brick Tiles Of Class Designation 10.0 , Providing And Fixing Precoated Galvanized Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : 12.24.1 Ridges Plain (500 - 600Mm) 12.24.2 Flashings/ Aprons.(Upto 600 , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. Using Flats 30X6mm For Diagonal Braces And Central Cross Piece. , Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 2 Mm Thick , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work (Two Or More Coats Applied @ 1.67 Liter/10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10Sqm) , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement :4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete Size Of Tile 600X600 Mm , Chequerred Precast Cement Concrete Tiles 22Mm Thick In Footpath And Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing, Cleaning And Curing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand) . Dark Shade Using Ordinary Cement. , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. , Pvc Bend , Providing And Fixing Of Pvc Pipe With All Fitting Complete Job , Providing And Fixing Of Pvc Pipe With All Fitting Complete Job , Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 75 Mm Diametre , Providing And Fixing Of Pvc Including All Fitting With Complete Job , Providing And Fixing Of Towal Ring With All Fitting With Complete Job , Providing And Inserting Upvc Pipe ( Working Pressure4kg/ Cm2) Single Sockted Pipe 110 Mm Dia , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc.: Internal Work-Exposed On Wall 15 Mm Dia. Nominal Bore , Dumping Of Stone Including Cost Of Stone Filling, Including Supply Of Stone And Carriage Complete Job , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Supply Of Wire Crates Of Approved Mesh Including Weaving Binding Sides And Partitionsand Binding Top After Filling Complete Job. , Extra For Every Additional Lift Of 1.5 M Or Part There Of Beyond 1.5 M Height For Hand-Packing Of Stones In Wire-Crates , Providing And Fixing Of Weep Hole With Pvc Pipe Of 100 Mm Dia Complete Job , Providing And Fixing Of Weep Hole With Pvc Pipe Of 110 Mm Dia Complete Job , Stone Work In Super Structure Upto Floor Five Level In Cement Mortar 1:6 ( 1 Cement :6 Coarse Sand) Including Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade And Curing Complete: White Sand Stone , Stone Work Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand) Including Centering, Shuttering And Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade And Curing Complete: Red Sand Stone B White Sand Stone , Plastering With Lime Surkhi Mortar Of 20Mm Thickness Including Preparation Of Mortar, Tamping, Curing, Prepared By Traditional Methods Including Mixing Of Gur, Tamarind Water, Dal Etc. As Per Tradition, The Work Is To Be Done With All Leads And Lifts, Surfaces To Be Plastered Shall Be Thoroughly Cleaned Of All Dust, Grease, Oil Etc. All Surfaces Should Be Kept Damp During The Progress Of Work. The Engineer-In-Charge Will Inspect And Approve All Preparatory Work. Curing To Be Done For 21 Days By Means Of Spraying , Roviding And Applying Lime Kara 1:2 (1 Lime: 2 Zikki Powder) Grinding Mortar With Grinding Mill/Manually On Lime Base, On All Flat Surface In Two Coats. First Coat Applying 3 To 4 M Thick And Curing Properly At Least 7 Days, Second Finishing Coat Done After 7 Days Of Previous Coat As Per Tradtional Practice (Thickness Not More Than 6Mm). , Providing Protective Coating Of Water Repellent Siloxane (Transparent In Color) Through Brush Or Spray Until Complete Impregnation Over Completely Cleaned And Dried Stone Or Plastered Surface To Reduce The Absorption Of Water , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Meter Lead As Per Direction Of Engineer-In-Charge. , Providing And Fixing Steel (White Powder Coated) Crescent Lock For Upvc Sliding Window/ Door With Necessary Screws Etc. Complete , Providing And Fixing Of Steel Banches , Providing And Fixing Glass Panes With Putty And Glazing Clips In Steel Door/ Windows/ Clerestory Window All Complete With 5.00Mm Thick Glass Panes Complete Job , Providing And Fixing Of Soap Dish , Providing And Fixing Inaugration Plate Including Writing Etc. Complete Job. , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Sand For An Avg Distance Of 5 Kms , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Stone Aggrigate For An Average Distance Of 7 Kms By Mt. , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Brick For An Avg Distance Of 5 Kms , Electrification Items : Supply, Installation, Testing & Commissioning Of 5 Mtr Height Decorative Pole Made Of Galavnised Mild Steel Pipe Duly Polyurethane (Pu) Paint Coated With 1 Mtr. Long Double Arm Designer Bracket Is Made Of Round Tube Conforming To Is 1161. The Pole(Od Of 114.3Mm And Thickness-3.6Mm) With Bracket Is Given Pre-Treatment And Finished With Pu Paint Giving It A Pleasing Appearance And Antique Finish. Pole Shall Be Available To Hot Dip Galvanize The Tube Before Painting. Foundation Bolt Size Shall Be 20X600x4nos. With Base Plate Size 300X300x12mm. A Door Is Provided With Electrical Accessories (Connector, Bakelite Sheet And 6 annual periodical maintenance Single Pole Mcb, Cable Looping Termional For 4X4/6Sqmm Copper Cable). Aluminium Casting In Golden Ring Form At Bottom, Middle, Top Of The Pole. The Pole Will Be Supplied With Brackets And Luminaire Combinations To Suit The Requirement. Branding Name Shall Be Embossed At The Bottom Near Junction/Mcb Box. Sticker Not Allowed In The Form Of Company Branding. Pole Shall Be Supplied With Outdoor Post Top Luminaire Of 45 Watt Ip67 Mounted In Suspension Type Having An Approximate Size Of 460Mm Outer Diameter And 635Mm Height, Housing - Aluminium With Designer Steel Aesthetic Crown, Optical Grade Opal Injection Moulded/Clear Polycarbonate Diffuser And Graphite Grey Uv Resistant Colour,Constant Current Electronic, Driver Provided With High Voltage ,Open & Short Circuit Protection And Ambient Temperature -10C To +40C. Supply 150V- 240V Power Factor 0.95 ,Thd ≤ 20% Internal Surge Protection Of 4Kv With Following Specification Of Light Engine For 45W : 4500Lumens, Cct 3000K ±500 Cct ,Cri 70 And Lumen Maintenance Of L70 At 50000 Hours Ip 65 Connectors,Accessories Etc Complete With All Repects. Design Of Pole Should Be Such That It Should Maintains Proper Illumination On Both Side.(Analysis Attached) , Led Flood Light, Powder Coated Pressure Die Cast Aluminium (System Lumen Efficacy ≥105 120 Lm/Watt). Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr -15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led, Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) , Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Ofrelevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 120 Lm/Watt Output .Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-Incharge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 250 Watt , Led Linear Profile (Ac) Led Rgb/Rgbww/ Rgbnw/Rgba/Rgbw, Linear Profile / Wall Washer Luminaire For Façade Lighting With Aluminium Extruded/ Die Cast Housing With Inbuilt Driver Of Following Wattage. Wattage Per Meter 25W , Supply, Installation, Testing & Commissioning Of 1.1 Grade, 4Cx10 Sqmm Al. Armoured Xlpe Sheathed Cable Including Termination (Along With Lugs) , Providing And Fixing Of Gi Pipe 50 Mm Dia , Feeder Pillar 1 Phase 2 Wire, 415V, 1Nos Of 100 Amps Incoming Sp Mccbs Fitted With Outgoing 04 No 32 Amps Sp Mcbs For Service Connections, Distribution Service Pillar Suitable For Outdoor Installation , Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 2P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accessories 4 Way Distribution Service Pillar. Support Galvanised Angle Frame And Legs (40Mm X 40 Mm X 3Mm) For Distribution Feeder Pillar With Leg Height 1M With 0.3M In Soil Approx [email protected] Per Mtr, Earthing Complete By Gi Pipe 40 Mm Or Gi Rod 20Mm 2.5 Mtr Long Through Gi Strip.Cement Grouting For Support Angle Legs, Spares @ 3%, Erection Charges @10%, Overheads @ 5% (1.0% T&P 0.5% Storage And Handling , 3% Contingency And Safety Equipments, 0.5% Insurance) And Turnkey Factor @25% With Astronomical Timer. , Earthing With Copper Earth Plate 600Mm * 600Mm * 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal/Coke And Salt As Required. , Wiring For Light Point/Fans Point/Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insıslated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gf Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group-A , Add For Vetting Charges Consultency And Contigencies @ 2.5 %
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
Jammu And Kashmir View Result →
15.
Tourism #11266721 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. B) All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 40 Kg / Cm2 (Wire Cut Bricks) In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry Usign Fly Ash Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) With Bricks Of Class Designation 40 Kgs / Cm2. Above Plinth Upto Floor V Level 200 X 95 X 95 , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineerin-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. Moulding As In Cornices, Window Sills Etc. Exceeding 15 Cm In Girth. , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates Columns, Pillars, Posts & Struts (Circular Or Curved In Plan) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint. B) In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing & Fixing Upvc Door Frame Yashashri Make Or Equivalent Made Out Of Upvc Extruded Multi Cavity Frame Of 60 Mm X 60Mm X 2Mm Wall Thickness. Frame Is Reinforced With G.I. Channel & Welded In Corners With Average Weight 0.80 Kg Per Running Mtr. These Frames Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing & Fixing 20 Mm Door Shutter Yashashri Make Or Equivalent, Made By Using 20Mm X 155Mm X 1.2Mm Upvc Multi-Cavity Section And Boarder Of 30Mm X 40Mm X 2.5Mm Upvc Multi Cavity Section. The Corners Are Joined By Inserting Polymetric Corners & Hardware Used For Fixing The Door Shutter Is Stainless Steel Hinges & S. S. Handle & S.S. Tower Bolt. The Average Weight Of 20Mm Door Shutter Is 4.60Kg Per Sq Mtr. These Upvc Sections Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete 250 X 16 X 5 Mm , Providing & Fixing Bright Finished Stainless Steel Ss 304 Grade Aldrops With Screws Etc. Complete. 250 X 150Mm. All Works Complete As Per The Drawing, Specification And Direction Of The Engineer-In-Charge-In-Charge , Providing And Fixing Stainless Steel D Type Handles With Necessary Screws Etc Complete A) L 300Mm/325Mm X 22 To 25Mm Dia , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete 125 X 70 X 4.0Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 200 X 10 Mm , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 150 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Windows With Three Tracks And Three Shutters Sliding Windows With Tubular Frame Sections Powder Coated With Pure Polyster Powder Of Thickness 15-80 Microns With Approved Standard Acessories Such As Ball Bearing Rollers Concealed Lock, 6Mm Plain Clear Glass With Epdm Beading Etc. , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete A) Dark Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. C) 80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.D) 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In Grey Colour (M35 Grade) , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm A) Jet Black , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Extra For Providing Opening Of Required Size & Shape For Wash Basin/ Kitchen Sink In Kitchen Platform, Vanity Counter And Similar Location In Marble/Granite/Cuddapah Stone Work, Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 20 Mm Thick. , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Approved Make And Colour With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Plain White Makrana Marble Slab 25 Mm Thick , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , Providing & Fixing In Position Double Skin Roof With Zincalume/ Galvalume Colour Coated & Bare Profile Sheet With Subtle Square Fluting Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respect. Top Sheet-The End Rib Shall Be Designed For Anti-Capillary Action. The Feed Material Should Be Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 43.5% Zinc &1.5% Si) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides) With Quality Paint Coat As Per As/Nzs 2728 Type 3-4. The Paint Shall Have A Total Coating Thickness Of Nominal 35 Μm, Comprising Of Nominal 20 Μm Exterior Smp Coat On Top Surface And Nominal 5 Μm Reverse Backer Coat On Back Surface Over Nominal 5 Μm Primer Coat On Both Surfaces Of Approved Colour Shade. Total Coated Thickness (Tct) Should Be 0.50Mm. Total Painted Thickness (Tpt) Should Be In Addition To 0.50Mm. The Steel Sheet Shall Be Fastened With Nominal 40 Μm Zinc Coated Or Nominal 25 Μm Zinc-Tin Alloy Coated, Hex Head, Self-Drilling Screw As Per As 3566-2002 Class 3 Fasteners Of Approved Make With Epdm Washer As Per The Requirement Considering The Profile Shape And Design Load. The Fastener Size Shall Be Calculated As Per The Design Or Manufacturers Recommendations. The Profile Sheet, Fastener Size Etc. Shall Be Approved By The Engineer. The Sheeting Should Be With Minimum 200Mm Lap & Waterproof With Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed Z-Sub Girt - Roll Formed Section 50X50x50x1.50 Tct, 120Gsm Galvanised, High Strength (345 Mpa), Approximate Wt. 1.85 Kg/R.M. Fixed With Self Tapping Screws Glass Wool Insulation With Fsk Facing 50Mm With 24 Kg/M3 Density In Between 2 Sheets. Liner Sheet-Bare Galvalume/Zincalume Roofing Sheet Of Same Profile As Top Sheet. The Feed Material Is Of Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt) (0.47 Mm Tct), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 45% Zinc) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides), Passivated & Resin Coated. The Feed Material Should Have Coil ManufacturerS Product Details Marked At Regular Interval For Confirming Genuinity Of The Material. Complete As Per The Directions Of The Engineer. The Steel Manufacturers Test Certificate For The Chemical & Mechanical Properties Of Steel Must Be Submitted For Approval Prior To Installation. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete. 140 Mm Nominal Size , Extra For Providing Flat Iron Bracket 50 X 3 Mm Size Instead Of 40 X 3 Mm Size With Necessary Bolts Nuts, Washers Etc. For Fixing A.C. Gutters To Purlins. , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters. 140 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Mts. Lead. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Dismantling Asbestos Sheet Roofing Including Ridges, Hips Valley And Gutters And Stacking The Material Within 50 Meters Lead. , Dismantling Tiled Roofing (Mangalore Or Pot Or Country Tiles) With Battens Etc. Complete Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. , Carting Away Unwanted Excavated Material Such As Soil, Lime, Moorum, Building Rubbish, Laterite Stone, Excavated Earth, Ordinary Rock Etc. From Site Lead Of 5 Km Including All Loading & Unloading Charges ( A ) ( By Mechnaical Automative Transport ) Contractor Should Arrange Land For Dispose Up These Material At His Own Cost Lead Upto 5 Km. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. , Supply, Fabrication And Installing In Position Ms Gates Of Required Width And Height Of Including Wicket Gate And Rolling Gate(If Necessary) Of Approved Size Made Of Channels Joists, Angles, Plates, Pipes And Ms Sheets Including Stiffeners, Bracing, Fabricated Hinges, Ms Aldrops Locking Arrangement, Tempered Steel Pivots, Guide Track Of Ms Tee, Ball Bearing Arrangement, Casters Wheels Etc. All Complete As Per Drawing, Specification And As Directed By Engineering In Charge All Complete. The Main Entrance Gate Shall Be Fabricated Out Of Mild Steel Sections Completed With Applying A Priming Coat Of Approved Steel Primer And Two Coats Of Synthetic Enamel Painting. The Structural Steel Works For Gates Shall Include Supply, Fabrication, Transportation, Erection Of Structural Steel Gates Complete With Placing In Position Embedded Parts In Concrete / Brickwork And In Road Surface Including Cutting, Grinding, Drilling Of Holes, Welding And Painting Etc Complete , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge A) 110 Mm Dia , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. Size 900 X 400 X 100 Mm With Steel Reinforcement Not Less Than 5.0 Kgs Per Unit -12 T Capacity , Providing & Fixing Of Reinforced Cement Concrete Gril Of Size 1.00 M X 0.6 M Ht Placed And Fixed On Coping Band For Compound Wall As Per Detailed Drawing Etc Complete , Construction Of Deepstambh Of Reinforced Cement Concrete Pillar With Exposed Laterite Masonary Of Octagonal Shape (1500Mm Length Of Each Side And Total Height Of 5500Mm) With Openings For Placing Diya Lamps And Foundation Platform Of Size (1800Mm Length Of Each Side And Height Of 1500Mm) Including Molding,Etc. As Per The Detail Drawings And As Directed By Engineer In Charge. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka, Padma And Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Corner (Ht 4.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 900Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height, 750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Featuring A 60Mm Height, 750Mm Width Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, ( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height,( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple Small Stupi ( Bagil Paik ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2400Mm X 2400Mm X 1800Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Plumbing Works , Proving And Fixing White Vitreous China Wall Hung Type (European Type) Water Closet With Seat And Lid With C.I. Brass Hinges And Rubber Fittings With Flush Valve Nelson/ Similar Fully Chromium Plated With Stop Cock, Wall Flanges, Flush Pipe Or Elbow And Vaccum Breaker Coupling Etc. Including Chair Bracket/Rag Bolts, Cutting & Making Good The Walls And Floors Where Required And Concealed Seat Support - W.C. Pan With White Plastic Seat And Lid , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore , Proving And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type W.C. Pan) Size 580 Mm With 100 Mm Sand Cast Iron P. Or S Trap 10 Litres High Level P.V.C. Flushing Cister (Of Approved Make) With Fittings, Rack Bolts 32 Mm Diameter P.V.C Telescopic Flush Pipe With Fit Tings And Clamps 25Mm P.V.C. Over Flow Pipe With Specials & Mosquito Proof Coupling Of Approved Municipal Design And Nylon Pull Complete Cutting And Making Good The Walls And Floors Where Required Long Pan Pattern W. C. Pan , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Large Lipped Front Urinal Basin Of 590X375x390mm Size With Urinal Valve Auto Closing System With Built In Control Cock & Wall Flange With Fittings, Spreader, R.S. Or C.I. Brackets, Standard Size C.P. Brassl Flush Pipe And Spreaders With C. P. Brass Unions & C. P. Brass Clamps With Waste Fitting As Per Is 2556, Pvc Trap With Outlet Grating And Other Couplings In Cp Brass Complete, Including Painting, Fittings, Cutting And Making Good The Walls And Floors Where Required. - Range Of One Urinal Basin , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75 Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 90 X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455 X610mm Internal Dimensions Total Weight Of Cover Ad Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg. ) , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:. 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 32Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Non-Return Valve Of Approved Quality : 40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality Low Pressure With Copper Floats 25 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 20 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 25Mm Outer Dia. , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc25 Mm , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete 150 Mm , Conveying Carefully From Stack At Site, 250M From Both Sides Rolling And Lowering Into Trenches, Laying And Jointing True To Line And Level, Reinforced Cement Concrete Spun Pressure And Non Pressure Pipes Of Various Classes, Specials Including Collar And Perfect Linking Of Joint With Jack To Correct Position Including Cost Of Jointing Material In Cement Mortar 1:2, Necessary Hydraulic Testing, Curing Of Cement Mortar Etc. Complete. 150 Mm , Providing And Fixing Angular Stop Cock With Wall Flangue - Jaquar Make. Florentine (Flr-5053N) 15Mm Of Approved Quality. , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996 1000 Lit. Capacity , Supply Of Inferential, Dry Dial, Type Domestic Water Meter,Suitable For Horizontal Installation, Duly, Sealed Against Tampering With Couplings At Both Ends Having Pulse Output Facility Compatable For Automatic Reading System ,Conforming To Is:779-1974 And Iso 4064-2005 Standards And Bearing Eec/Mid/Oiml Mark, (With Latest Amendments)Along With Test Certificate From Fcri/Nabl As Desired By The Department.25 Mm , Fixing Water Meter & Stop Cock In G. I. Pipe Line Including Cutting & Treading The Pipe And Making Long Screw Etc. Complete (Cost Of Water Meter And Stop Cock To Be Paid Separately) , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality : 15 Mm Nominal Bore , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 Including Cutting Of Stone And Making Good The Walls Wherever Required. Kitchen Sink Without Drain Board. With Coupling & All Accessories Complete With Choke Stop Strainer, Plain Type Having Flat Borders For Correct Sandwithing Between The Plaform Top And Bottom Slabs Complete. Overall Size 610Mmx510mm (24X20) Bowl Size 545Mmx445mmx200mm (211/2X 17 1/2X 8) Depth 200 Mm. Glossy. 1.0Mm Thk, , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Pillar Cock With Extended Lever Handle And Wall Flange Confirming To Is 8931; 1993 15Mm Nominal Bore , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of Architectural Designed Pole Of 3Mtr Height Post Top Pole Made Of Galvanised Iron Sections Of 114Mm & 60Mm Dia. This Architecturally Designed Pole Is Structurally Sound. Windspeed Considered Should Be As Per Is875:Part 3:1987 ,Material For Tubes Steel Of Grade Yst210.,Material For Base Plate Steel Of Grade E250 To Is2062; 2011. The Pole Will Be Provided With An Inbuilt Junction Box To Fix 16-32Amp Connectors & 6-16Amp Mcb Inside The Cut Window Of The Bottom Pipe The Inbuilt Box Should Have A Flush Door Of Suitable Size With Allenkey Locking On Bothside. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 200X200mm Having 10Mm Thickness. The Base Plate Shall Have 4 Hole Suitable For M16/450 Foundation Bolts . The Galvanized Zinc Coat Should Not Be Less Than 65+/ 10Microns. The Galvanised Pole Should Be Painted In 3Layer Coating (Coating Thickness Should Not Be Than 80Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint With Overall 100 +/- 10 Microns. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of 45-50W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40-45W Led. Fitting Shall Be Post Top Mounting Type Fixture. System Wattage: 40-45W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply, Led Lumens:6000Lm, Cri(Ra):80, Led Colour Temperature: 4000K, Life Span:60,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv . Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70b50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-18 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (C) 50 To 100 A , Supply Of 3 Kva 3 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board Consumer Unit 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Hinged Front Acrylic Cover For The Mcb Knobs Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (B) 2 + 8 Way Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. B) Dp, Cat A , Supplying And Fixing Following Rating Double Pole (Single Pole And Neutral) 240 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Isolator 2 Pole 40A, Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 20 Led 40W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 66 Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Type/Ip65 12W Ceiling-Mounted Led Downlight Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,Complete With All Required Accessories .Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii)) , Supply Of 2Kva ,1Ph In - 1Ph Out True Online Ups System In Standalone Configuration With Advance Dsp Based Technology Double Conversion Igbt Rectifier And Igbt Based Inverter Ups System With Cabinet And Smf Battery Backup For 60 Mins. Using 12V Batteries Including Battery Protection M.S Rack Suitable Dimension, Standard Rating Cable For Interlinks Cable And D.C Cable Up To Standard Length In Mtrs From Ups To Batteries Including Labour Charges For Installation Testing And Commission And Carrying Charges.(With Out Isolation Transformer)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
16.
Educational and Research Institute #11223212 Technical Bid
Tender For Supply And Fixing Of Mechanical Engineering Research Laboratory Furniture(Rp-157) Of New Academic Block At Smvd University, Kakryal, Katra , Research Lab, Mechanical Engineering, Smvd University Katra , Table For Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 1500 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. Dimensions Tolerance + 20 Mm. , Table For Faculty Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 2000 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor.Dimensions Tolerance + 20 Mm. , Chair For Cabin & Faculty Rooms - Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Medium Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Malaysian Moulded Hot Pressed Plywood (12+6)Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm. Seat And Back Shall Be Joined With Hr Steel Sheet. The Armrest Shall Be Used Pp Arm Fixed Type Completely Joint With Seat. The Chair Shall Have Synchro Knee Tilt Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 480±10Mm(W) X 495±10Mm(D) And Back Size Shall Be 590±10Mm(H) From Seat & Overall Height = 1030±10Mm. Dimensions Tolerance + 20 Mm. , Executive Table For Cabin 3 - Supplying & Installing Of Table With Eru And Pedestal Having Following Specifications. The Table Shall Be Supplied In Completely Knock Down Conditions With An Overall Size W1800 X D1800 X H750mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1800 X 900Mm Made Up Of 50Mm Thick Plpb With Approved Laminate And Finish As Per Approved Shade. The Top Edge Should Cladded With 1.2Mm Thick Extruded Aluminium Section All Around The Worktop And Die Cast End Caps On Joints For Better Strength Of The Table. The Profile Shall Be In Rectangle Shape And Enclosed By Flapper Box For Electric Provision. The Top Shall Be Supported On Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 50Mm Thick Medium Density Fibre-Board Linear In Profile And The Edges Cladd With Extruded Aluminium Profile. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Particle Board And Shall Be Linear In Profile. The Table Shall Be Supplied With Credenza Unit With An Overall Size 900Mm X 450Mmmm That Shall Be Constructed From Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With 25Mm Thick Top And Other Parts 18Mm Thick Like Shutter, Back, Facia Etc. The Drawer And Shutter Shall Be Operated With Ball Bearing Sliding Channel And Concealed Crank Hinge. G-Profile Aluminium Handle Shall Be Supplied For Ease Of Opening. The Eru Unit Shall Be Mounted On 38Mm Dia. Leg. Fixed Pedestal Shall Be Supplied With An Overall Size 380Mm X 400Mm X 600Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Top Shall Be 25Mm Thick, Side, Back, Facia Shall Be 18Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer Having Same. The Drawer Shall Be Operated With Ball Bearing Sliding Channel To Enable Smooth Operation. Aluminium Handle Shall Be Provided For Ease Of Opening. For Locking Provision Central Lock Mechanism Shall Be Given In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted On Aluminium Round Leg. Dimensions Tolerance + 20 Mm. , Executive Chair For Cabin 3- Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Hydraulic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm & Overall Width/Depth = 740±10 Mm.. Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin 3 - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Powder Coated 50-60? (Dft) Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 520±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1030±10 Mm, Overall Depth = 620±10 Mm & Overall Width = 620±10 Mm. Dimensions Tolerance + 20 Mm. , 2-Seater Sofa For Cabin 3 - Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm & Overall Height = 800±10 Mm. Dimensions Tolerance + 20 Mm. , Centre Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 1200Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , Corner Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. , Wooden Almirah For Cabin Faculty Room & Hall - Supplying & Placing Storage Unit With An Overall Size 900Mm X 450Mm X 2000Mm. Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 3 Nos. Of Adjustable Shelf And 1 Fixed Shelf. 2 Normal Shutter And 2 Glass Shutter Shall Be Provided For Closing And Opening The Shutter. The Glass Shutter Shall Be Made 4Mm Clear Glass Insert Within Aluminium Profile. The Shutter Shall Be Operated With Concealed Crank Hinge With Ss Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. Dimensions Tolerance + 20 Mm. , Steel Almirah For Cabin Faculty Room & Hall - Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. Dimensions Tolerance + 20 Mm. , Steel Bookcase For Cabin & Faculty Room - Providing And Supplying Metal Book Case With An Overall Size 915 Mm (W) X 320 Mm (D) X 1750Mm (H). The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. All Components Shall Be Made Of 0.8Mm High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure.Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin & Faculty Rooms - Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Cushion Arm With Leatherite Covering. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Circular Pipe Having Dia. 28.6Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 480±10 Mm(W) X 460±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 580±10 Mm(H) From Seat & Overall Height = 1020±10 Mm, Overall Width = 610±10 Mm & Overall Depth = 670±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Conference Table - Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2400Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Have Same Size Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Single Sided Flapper Box Shall Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 900Mm X 570Mm. The Gable End Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Be Supported On Ss Pipe Leg 202 Grade. It Shall Have Cross Section Area 80Mm X 20Mm. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Main Chair For Conference Table - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 720±10 Mm(H) From Seat. Overall Height Shall Be = 1180±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Chairs For Conference Table - Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 520±10 Mm(H) From Seat. Overall Height Shall Be = 980±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Discussion Table- Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 900Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Table Understructure Shall Be A Combination Of Ms Powder Coated And Pre-Laminated Particle Board. There Shall Shoe Provided At The Base To Avoid Scratches On The Floor. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Chair For Discussion Table - Supplying And Placing Lounge Chair. The Seat Shall Be Made Of 12 Mm Thick Hot Pressed Plywood Upholstered With High Resiliance Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535 Gsm And The Back Shall Be Made Of Wooden Frame Upholstered With High Resiliance Moulded Polyurethane Foam 25Mm Thick Having Density 32Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535Gsm. The Frame Structure Shall Be 4 Legs Support Type Made Up Of Reducing Pipe Frame Powder Coated Tubular Pipe Having Cross-Section Area Dai 19Mm Thick. The Seat Size Shall Be 430±10 Mm (D) X 450±10 Mm (W) And Back Size Shall Be 500±10 Mm (W) X 400±10 Mm (Ht) From Seat. Overall Height Shall Be = 840±10 Mm, Overall Depth = 540±10 Mm & Overall Width = 580±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Workstation For Hall - Supplying & Placing Modular Workstation In Completely Knock Down Conditions With Size :- W1200 X D600 X H750/1200Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure. The Worktop Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Re Lam Particle Board With Laminate And Sealed With 2Mm Thick Pvc Edge Banding. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Plpn. Partition :- 60Mm Thick Panel Based Partition Of Height 1200Mm Having Provision Of Fabric / Soft Pin Up Board/ Laminate / Race Way. Worktop :- 25Mm Thick Plpb Board With Pvc Edge Banding. All Aluminum Parts Shall Be Pretreated And Duly Powder Coated Of 40?-50? Thick. Raceway Shall Be Provided Of Aluminum Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminum Extrusions Of Size 60X19mm With 1.5Mm Thick And Should Be Covered With Die Cast End Caps On Joints, 2 Ways, 3 Ways & 4 Ways Caps As Required. Wire Management Partition Shall Have Concealed Wire Management Capabilities And Shall Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. Mobile Pedestal :- (2D + 1F) 18Mm Thick Plpb Board With Pvc Edge Banding, Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. A Nylon Castor Based Cpu Unit Shall Be Provided With 18Mm Thick Plpb. Dimensions Tolerance + 20 Mm. , Chair For Workstations - Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Foam Net Tapestry 0.9Mm Thick And 300 Gsm And The Back Shall Be Made Of Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Adjustable Lumbar Support. The Chair Shall Be Supplied With Injection Moulded Pu Adjustable Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Actice Bio-Synchro Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Beinjection Moulded In 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 520±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 495±10 Mm(W) X 610±10(H) From Seat & Overall Height = 1010±10 Mm. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , 2 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 2 Locker Unit. Each Locker Shall Have 1 Nos. Of Hanging Rod. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 3 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 3 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 4 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 4 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , Lab Over Head Unit- Providing And Fixing Lab Over Head Unit With Overall Dimensions 750(W)Mm X 320(D)Mm X 675Mm(H). Over Head Unit Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet. Each Shelf Shall Have Load Carrying Capacity Of 30-40 Kgs. Mp With 180 Degree Cam Lock. Semi Recessed Handle And Ss Hinge. Shutter Shall Be Provided With A Mp Lock. , Laboratory Lab Stools- Providing And Placing In Position Ht. Adjustable Stool With Back. The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm (W) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 40 +/-2 Kg/M3. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079/ Hr ), Powder Coated ( Dft 40-60 Microns ). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Dimensions Tolerance ±20 Mm.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Jammu And Kashmir View Result →
17.
Public Administrative Department #11212849 Price Bid
Tender for Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying And Fixing Of Light Class Gi Pipe Of 50 Mm Dia (Nominal) 3 Meters Length Along The Pole For Protection Of Under Ground Cable As Required. , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C X 6 Sqmm , Fabrication, Supplying And Fixing Class B Galvanised Single Overhang Arm Bracket Made Out Of 250Mm Long Galvanised Top Tube With Cap And 1000Mm Long 32 Mm Dia Galvanised Pipe With Tightening Bolts Complete As Required , Fabrication, Supplying And Fixing Class B Galvanised Double Overhang Arm Bracket Made Out Of 250Mm Long Galvanised Top Tube With Cap And 1000Mm Long 32 Mm Dia Galvanised Pipes With Tightening Bolts Complete As Required. , Supply And Fabrication Of Pole Protection System Made Up Of 8 Swg Steel Wire Mesh Of Size 25Mm X 75Mm Rectangular With 50Mmx50mmx6mm Ms Angle Iron For Supporting The Mesh I/C Mv Danger Plate And Grounding The Protection System In Suitable Quality Of cement concrete Etc As Reqd. , Providing And Laying In Position M25 Grade Reinforced Cement Concrete Foundation Of Size 450 Mm(L) X 450 Mm Wide And 1000 Mm Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Rewinforcement Of Cold Twisted Bars Of 12 Mm Dia -960Mm Long (Approx.) - 8 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 1400 Mm (Approx.) - 6 Nos. (With 150 Mm Spacing) As Required With Supplying And Positioning Of 4 Nos Foundation Bolts Of Size 16 Mm Dia And 600 Mm Long, J Type I/C 2 Nos Template Anchor Plates Of Size 225 Mm X 225Mm X 3 Mm And Providing 63 Mm Dwc Hdpe Pipe For Cable Entry & Exit As Required For 5Mtr Pole , Fabrication, Supply & Erection Of 5.0 Mtr Height, Minimum 3 Mm Thick, Bottom Dia Of 130Mm & Top Dia Of 70Mm, Base Plate Of Size 225 X 225 X 12 Mm Thick Flange Mounted Hot Dip Galvanized Octagonal Pole Made From Ht Steel Plate, Window With Flash Cover With Full Vertical Window Cover At Appropriate Height From The Base Plate On Existing Cement Concrete Pedestal As Required. L/C Supplying And Fixing Of 6 Mm Thick Laminated Mounted Sheet Inside The Window And L/C Providing And Welding 3 Nos. Gi Strips 4 Mm Thick Of Suitable Length And Having Suitable Size Tapped Holes As Reqd, Terminal Block Suitable For 25 Sq Mm Conductor - 4 Nos. & Shorting Links On Din Channel L/C Providing And Fixing Din Channel Of Suitable Length, 6 Amp. Spmcb C Curve Characteristics, Earth Stud, Cable Support Clamp Suitable For Upto 4X25 Sqmm Cable. Logo/Name Of Manufacturer Shall Be Either Embossed Or Rivited Plate On The Pole. Galvanization As Per Relevant Is Code Etc As Required , Fabrication, Supplying, Installation, Testing, Commissioning Of 12 Metres Semi High Mast System With Its Accessories, Mast Shaft Shall Be In One Section, Hot Dip Galvanized 4Mm Thick(Single Dip) Inside & Out Sides &Sultable For Wind Velocity As Per Is 875 Part3.There Shall Be In Longitudinal Seam Weld Per Section And No Circumferential Weld. It Should Also Included Accessories For Seml High Mast Head Frame,2 Point Suspension System,5 X 2.5 Sqmm Copper Conductor With Steel Wire Rope 5Mm Dia. (7/19 Construction) Single Drum Winch ,Galvanized Lantern Carriage Arrangement Suitable For 4/6 Nos. Flood Light Luminaries Symmetrically And Its Control Gears Boxes And Lighting Finial, The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panel Housing Suitable Reinforced Cement Concrete (1:2:4) Shallow Foundation Of Size 1M(L) X 1M Wide And 2M Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100Mm Long (Approx.) 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia 3700 Mm (Approx.) 13 Nos. (With 150 Mm Spacing) As Required With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For The Semi High Mast Considering The Safe Soil Bearing Capacity At Site As 10T/Sqm At 2Mts. Depth With All Material I/C 4 Nos S.P Mcb,1 No. Double Pole 16Amp. Mcb Etc As Reqd. Logo/Name Of Manufacturer Shall Be Either Embossed Or Rivited Plate On The Pole. Galvanization As Per Relevant Is. , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy ≥135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminum Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Freq 50/60 Hz, Operating Temp Range -5 Deg Centigrade To 50 Deg Centigrade, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-45, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2 , P. F.≥0.95, Ip66,Ik-10, Cri ≥70 , Under Voltage And Over Voltage Protection,Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report , Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) , Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminum Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Led Flood Light, Powder Coated Pressure Die Cast Aluminum (System Lumen Efficacy ≥135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminum Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Freq 50/60 Hz, Operating Temp Range -5 Deg Centigrade To 50 Deg Centigrade, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2 , P. F.≥0.95, Ip-66,Ik-10, Cri ≥70 , Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led,Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report , Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminum Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 100W , Supply And Fixing Of 32Mm Dia X 1 Meter Long G.I. Pipe (Medium Class) Bracket For Mounting Of Fluorescent/Hpmv/Hpsv Street Light Fitting On Pole Including Bending The Pipe To The Required Shape , 2 Nos 25Mm X 6Mm Flat Iron Clamps With Nuts, Bolts And Washer , Painting The Flat Iron With Primer And Finish Paint Etc. As Reqd. , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*4 Sqmm
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 6
18.
Public Administrative Department #11212721 Price Bid
Tender for Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying And Fixing Of Light Class Gi Pipe Of 50 Mm Dia (Nominal) 3 Meters Length Along The Pole For Protection Of Under Ground Cable As Required. , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C X 6 Sqmm , Supply And Fabrication Of Pole Protection System Made Up Of 8 Swg Steel Wire Mesh Of Size 25Mm X 75Mm Rectangular With 50Mmx50mmx6mm Ms Angle Iron For Supporting The Mesh I/C Mv Danger Plate And Grounding The Protection System In Suitable Quality Of cement concrete Etc As Reqd. , Fabrication, Supplying, Installation, Testing, Commissioning Of 12 Metres Semi High Mast System With Its Accessories, Mast Shaft Shall Be In One Section, Hot Dip Galvanized 4Mm Thick(Single Dip) Inside & Out Sides &Sultable For Wind Velocity As Per Is 875 Part3.There Shall Be In Longitudinal Seam Weld Per Section And No Circumferential Weld. It Should Also Included Accessories For Seml High Mast Head Frame,2 Point Suspension System,5 X 2.5 Sqmm Copper Conductor With Steel Wire Rope 5Mm Dia. (7/19 Construction) Single Drum Winch ,Galvanized Lantern Carriage Arrangement Suitable For 4/6 Nos. Flood Light Luminaries Symmetrically And Its Control Gears Boxes And Lighting Finial, The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panel Housing Suitable Reinforced Cement Concrete (1:2:4) Shallow Foundation Of Size 1M(L) X 1M Wide And 2M Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100Mm Long (Approx.) 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia 3700 Mm (Approx.) 13 Nos. (With 150 Mm Spacing) As Required With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For The Semi High Mast Considering The Safe Soil Bearing Capacity At Site As 10T/Sqm At 2Mts. Depth With All Material I/C 4 Nos S.P Mcb,1 No. Double Pole 16Amp. Mcb Etc As Reqd. Logo/Name Of Manufacturer Shall Be Either Embossed Or Rivited Plate On The Pole. Galvanization As Per Relevant Is. , Providing And Fixing Name Board Made Of Ms Sheet 90X60cm, 1Mm Thick With Frame Of Ms Angle 50X50x6mm, Two Diagonal Braces At The Back Of The Sheet Of Ms Flat 40X6mm, Total Height Of The Board Above Ground Level 2.40M, Length Of Legs Below Ground 0.30M Embedded In Cement Concrete Block 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20Mm Nominal Size) 30X30x45cm Including Excavation And Removal Of Surplus Earth With In 50M Lead, Applying Priming Coat Of Approved Steel Primer, Painting With Synthetic Enamel Paint Of Approved Quality And Lettering With Enamel Paint Of Approved Colour (One Side) As Per Drawing/Direction Of Engineer-In-Charge , Led Flood Light, Powder Coated Pressure Die Cast Aluminum (System Lumen Efficacy ≥135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminum Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Freq 50/60 Hz, Operating Temp Range -5 Deg Centigrade To 50 Deg Centigrade, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2 , P. F.≥0.95, Ip-66,Ik-10, Cri ≥70 , Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led,Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report , Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminum Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 100W
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
19.
Defence #11198549 AOC
Tender For Spl Repair To Certain Md Accn In Kandhar Line Under Ge Central Delhi Cantt-10; 1 Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc including remove alldebris at 2 KM away from site complete all as specified and directed. 2 M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces, applied in two layers i.e. 1st layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4 )mixed with WPCfinished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately) 3 M&L for rendering 10 mm thickin CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 4 M&L for rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 5 M&L for preparation of new plaster surfaces of wall and applying water proof wall putty 1-2 mm thickness over plastered surfaces to prepare the surfaces even and smooth and finishing walls with Two coats @ 1.67 ltr/10 Sqm each acrylic smooth exterior paint of required shadeover and including priming coat of exterior primer @ 2.20 Kg/10Sqm complete all as specified and directed. 6 M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified and directed. 7 M&L for Preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper complete all as specified and directed. 8 M&L for complete removal of existing treatment of old decorated plastered or unplastered surfaces of wall by rubbing , brooming down, washing with water etc and applying two coats of oil bond distemper complete all a specified and directed. 9 M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etc and providing and applying 1-2 mm thickness wall putty over plastered surfaces to prepare the surface even and smooth and finishing wall surfaces by applying Two coats @ 1.67 ltr/10 Sqm each with acrylic smooth exterior paint of required shade over and including priming coat of exterior primer @ 2.20 Kg /10Sqm complete all as specified and directed. 10 M&L for dismantling water tanks of capacity exc 250 litres & n. exc 500 litres complete all as specified and directed. 11 M&L for rotational moulded polyethylene water storage tanks (ISI Marked) white colour 500 litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball complete all as specified and directed. 12 S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 13 S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 14 Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. 15 Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) complete all as specified and directed. 16 Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting pointcomplete all as specified and directed. 17 M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone crushed aggregates) on roof padding, surface finished even and smooth without using extra cement complete all as specified and directed. 18 M&L for providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer or equivalent (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalentcomplete all as specified and as per manufacturers instructions. 19 M&L for providing and applying Smartcare Dampproof or equivalent, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per manufacturers instructions and all as specified & directed. 20 Supply only integral water proofing compound (ISI marked) complete all as specified and directed 21 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified and directed 22 M & L for brick work with Cement Mortar 1:6 using sub class B bricks, old size, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed. 23 All As per item no 22 before but except bricks etc complete all as specified & directed 24 Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed. 25 Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 26 Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 27 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 28 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 29 S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 30 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 31 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).Note: MTC and Screw Out Test shall be provided by Contractor 32 Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test shall be provided by Contractor 33 S&F Aluminium windowfor outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter(02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. 34 S&F Aluminium windowOuter frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter (02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm SS 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. NOTE:- For installation of windows AC/desert cooler the provn of window glass shutter with wire mesh,grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirementt during execution as direction of Engg-in-Charge. 35 S&F ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone complete all as specified & directed 36 Dismantling of wall and ceiling/cupboard board fibre pulp AC boards etc any thickness including cover fillets removing the wiring complete all as specified & directed 37 S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified & directed. Material test certificate and authentication should be compulsory provided by the contractor. (For WC/Bathroom/Toilet/Kitchen and Cabinets) 38 S&F stainless steel continuous (Piano) hinges, bright finish, width of flap when open 30mm, complete all as specified & directed. 39 S&F of stainless steel handles 100 mm sizefor kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. 40 S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. 41 S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws complete all as specified & directed 42 S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) complete all as specified & directed 43 S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) complete all as specified & directed 44 S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked) complete all as specified & directed 45 S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked) complete all as specified & directed 46 S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all as specified & directed. 47 M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed 48 M&L for preparation of Old or previously treated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed. 49 S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 1mm thick sheet complerte all as specified and directed. 50 S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed. 51 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm etc complete all as specified & directed 52 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm etc complete all as specified & directed 53 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 40mm etc complete all as specified & directed 54 Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed 55 All as per item No. 54here in beforebut 20 mm dia complete all as specified and directed. 56 All as per item No. 54 here in beforebut 40 mm dia complete all as specified and directed. 57 S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed 58 Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for concealed water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all as specified & directed. 59 Supply and fix in repairvitreous China wash hand basin (including pedestal)white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures complete all as specified & directed 60 Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe) complete all as specified and directed, 61 S&F in repair vitreous china wash down water closet EWC white/ ivory/off white (closedpattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flushpipe) complete in all respect complete all as specified & directed 62 Supply only PVC low level white flushing cistern valveless symphonic action type 5/10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified & directed 63 S&F in repairs 15 mm dia 600mm long PVC connectionswith brass check nut complete all as specified & directed 64 S&F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge. 65 S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railingcomplete all as specified and directed by Engineer-in-Charge. 66 S&F in repairsHealth faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. 67 S&F fancy type brass chromium plated toilet paper holder, complete all as specified & directed 68 S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified & directed 69 S&Fin repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 70 S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 71 S&Ffor 15 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 72 S&Ffor 20 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 73 S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed. 74 S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 75 S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture model Quarter half turn (SOLO) omplete all as specified & directed. 76 S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO) complete all as specified & directed 77 S&F in repairs Brass chromium plated mode 2 in 1 sink mixturemodel Quarterhalf turn (SOLO) ofas complete all as specified & directed. 78 S&F in repairs chromium plated soap dish fancy type complete all as specified & directed 79 S & F in repairtowel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embedded in cement mortar 1:3 with MS screws etc complete all as specified and directed. 80 Dismantling of floor of size not exceeding 4.00 Sqm each for EWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 4.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 81 Dismantling of floor of size not exc 1.50 Sqm for IWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 82 Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. 83 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over and including 15mm thick screed bedin cement mortar 1:4 set and jointedin neat cement slurry and pointed in coloured cement. complete all as specified and directed 84 S&F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.. 85 All as per item no. 84 here in before but on vertical surfaces as in skirting etc over and including 10mm thick screed bed in CM 1:3, set and jointed in white cement with pigment to match all as specified and directed. 86 M&L glazed ceramic coloured tiles in vertical surface600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 10mm thick in CM (1:3) complete allas specified & directed. 87 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc incl brushing neat cement slurry with 3.0kg of cement per sqmtr complete all as specified and directed. 88 M&L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes over and including cement mortar bedding of 20 mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. 89 M&L for machine cut kota stone slab flooring, and (one Pieces) as in tread, riser, landing, 20-25 mm thick over and including cement screed bed 20mm thick in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 90 M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete all as specified and directed Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. 91 M&L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water.All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint complete all as specified and directed. 92 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 93 M&L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and directed 94 M&L for 40 mm thick cement concrete 1:2:4type B0(using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fairusing extra cement, complete all as specified and directed 95 Demolition of reinforced cement concrete in any position complete all as specified and directed 96 M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone crushed graded aggregate) as in louvers and jallies 25mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown complete all as specified and directed 97 M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone crushed aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed. 98 Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed. 99 S&F TMTmild steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed. 100 Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter including bends complete all as specified and directed . 101 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete all as specified and directed . 102 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete all as specified and directed 103 S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete all as specified and directed. 104 S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete all as specified and directed. 105 S&F for PVC (SWR) door plates , Yjunction 110 mm bore complete all as specified and directed. 106 S&F for PVC (SWR) door plates ,T junction 110 mm bore complete all as specified and directed. 107 S&F for 100 PVC (SWR) bends with door plate& teecomplete all as specified anddirected. 108 S&F for 75 mm PVC (SWR) bends with door plate & tee complete all as specified anddirected. 109 S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified anddirected. 110 S&F in repair 20 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of Stainless Steel tubefor curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. 111 Dismantling wrought iron or mild steel work of any description not otherwise provided for parapet railing, balconies, tank staging, metre rooms shaft areaany descriptioncompleteas specified and directed. 112 Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm including welding complete all as specified and directed. 113 S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed 114 Dismentling asbestos cement corrugated orsemi corrugated sheets in roof fixed with L hook or cranked bolt complete all as specified and directed 115 S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge 116 S&F in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. 117 ROAD, PATH AND CULVERT 118 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 119 M&Lfor 75 mm thick PCCtype D-2 1:4:8 (40mm graded aggreate) as sub-base complete all as specified and directed 120 S&F Endura colour paving tiles 30cm X 30cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 121 M&L for Providing PCC in coping type B-1, 1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified and directed 122 M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed 123 SEWAGE DISPOSAL 124 Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified and directed 125 Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed 126 Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed complete all as specified and directed 127 M&L for PCC 1 : 4 : 8 type D2 using 40mm graded stone crushed aggregates as in foundation of manholes, posts etc completeall as specified and directed. 128 M&L for PCC 1 : 2 : 4 type B1 using 20mm graded stone crushed aggregates as in surfaces channels and drains complete all as specified and directed. 129 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified and directed. 130 S&F DWCPE(SN8) 150mm dia (Internal Dia)pipes, snap fit coupler and rubber ring including testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed. 131 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified & directed 132 M&L for Brick work with sub class ‘B’ bricks straight or curved on plan, built in cement mortar 1:4 using old size bricks complete all as specified and directed. 133 All as per item no 130 here-in-above but except bricks 134 M&L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Itemwater troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. 135 M&L for precast factory made manhole cover, area of each cover n.exc 0.60 Sqm, 100mm thick with SFRCconcretingincluding grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified and directed. 136 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia pipe, complete all as specified. 137 M&L for rendering 15mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound @ 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately. 138 Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),150 mm diapipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge 139 INTERNAL ELECTRIFICATION 140 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc 141 Taking down old MCCB , TPN DBs , SPN DBs (incl MCB SPN & SP) & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. 142 Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. 143 Disconnecting elect connection and taking down of ceiling fan/ Exhaust fanof any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge. 144 M&L for point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit of 20 mm nominal diaand conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and including provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel concealed in walls, with modular sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, complete all as specified and directed for the following:- 145 One light /Ceiling fan/exhaust fan point controlled by one switch. 146 One light point controlled by two, two way switch ( switch to be measured and paid separtely) 147 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. 148 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board 149 One bell point controlled by one bell push. 150 All as per item Ser No 142 here-in-before but point wiring with 2.5 sqmm single core FRLS 1100 Volts in New PVC concealed conduitmedium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm single core FRLS 1100 Volts copper conductor cableas earth continuityconnected to common earthfor one 15 A switch socket power point, complete all as specified and directed 151 M&L for submain wiring 4 Sqmm nominal cross sectional area,two single core, 1100 Volts grade, multi-stranded, PVC insulated unsheathed, FRLSHcopper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of suitable dia, medium grade with all conduit accessories and connected to common earth dolly to suitable copper lugs including all cutting/chases etc in walls and making good to the disturbed surfaces to match the existingsurfaces.Note:- Three run of single core wire andone run of conduit shall be measured and paid as one unit complete all as specified and directed 152 All as per item ser No 144 here-in-before but for 02 x 6 Sqmm for phase & neutral and 01 x 6 Sqmm for continuousearth wire concealed/surface 153 M&L for switch Modular type 6 Amp one wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110 154 M&L for switch Modular type 6 Amptwo wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 2573402/ Schnider Cat No X1002WH/Wipro Cat No RF 210 155 M&L for switch Modular type type 16 Ampone way,ISI marked complete all as specified and directedMake : Legrand Cat Part No 573410/ Schnider Cat No X11001WH/Wipro Cat No RF 130 156 M&L for Modular type socket outlet 2 in 1, 5 pin 6 Amp ,ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/Wipro Cat No R 1212 157 M&L for Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573471/ Schnider Cat No X2106WH/ Wipro Cat No R 1332P 158 M&L for ceiling rose 3 phase PVCpolycorbonate,isolated body, complete all as specified and directed 159 M&L for bell push,modular type, 6 Amp, 1 moduleISI marked complete all as specified and directed.Make : Legrand Cat Part No 573413/ Schnider Cat No X1005WH/ equivalent in Wipro 160 M&L for bell ding dong AC, 230 volts, single pole complete all as specified and directed. 161 M&L for angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete all as specified anddirected. 162 S&F LED bulb 12 watts, 1200 lumens output, 6500K suitable for B-22 base complete all as specified and directed. 163 M&L for earthing complete with GIelectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earthplate not less than 1.50 mtr below normal ground level connected to GI wire 4.0 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze drilled and screwed all as specified including excavation and earth work and disposal of surplus soil incl 15 mm GI tubing light grade and necessary fitting for protection of GI wire incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MSangle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised wire and protection light grade GI pipe upto 7.5 mtr, excavation, etc shall be deemed to be in the quoted rates. 164 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 08 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 165 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 12 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 166 S&FMCB confirming to ISI/IEC -60898-1 (2002), SPN, AC, 240 volts, of 40Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 167 S&FMCB confirming to ISI/IEC -60898-1 (2002), SP, AC, 240 volts, of 6-32Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 168 Supply and fix in replacement LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 120 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. 169 S&F in replacement of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. 170 M&L for in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate,Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 Including 12 W retrofit LED BULB (B-22 base). NOTE- one piece of LED bulb 12 watts included with city -1 fitting complete all as specified and directed. 171 Supply and fix in replacement 10 watts bulkhead fitting, IK 09 with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover,including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. 172 Taking down existing electric meter & refixing the same after completion of job with electric connection by 8 way DB in good way by cleaning and qtr No. marking complete all as specified and directed.. 173 Supply and fixingexhaust fansmetal body AC single phase 230/240 V of size300 mm sweep, Air flow rate > 900cum/min, Bird screen forprotectionagainst birds, double ball bearing, metal body with louvre also with louvre for fixing of exhaust fan complete all as specified and directed. 174 Supply and fixing new BLDC fan against old ceiling fans BLDC conversionthree blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5star rating for energy saving, rated Air delivery >220 cum/min,AC single phase 230/240 V of size 1200 mm sweep including fan regulators,down rod, canopy & all accessories including making connection with three core flexible, copper winding in fan,copper cable pvc insulated of suitable length, complete all as specified and directed. NoteBLDC Fan should work onelectronic fan regulator & also with remote controled. 175 S&F modular type sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall complete all as specified and directed. 176 S&F of water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity25 Ltrs, having heating element 1.5 KW and not less than 5 star rating,suitable for ,230 volt,50 Hz electric supply complete all as specified and directed . 177 S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed. 178 S&F in replacement pressure die cast aluminium housing LED street light luminaires with IP-66 deg. of protection suitable for 35 watt LED fitting, Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 duly fixed on 25 mm dia GI pipe light grade including 40 X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : Quoted rates shall be inclusive of all accessories like suitable GI pipe, 40x6 mm thick MS flat, fastner, nut & bolts, suitable length of flexiable wire etc. 179 S&F in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-43 protection), mechanical impactstrength IK - 09, with cement spill protector double doorfabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and12 Nos of SP MCB 10 to 63 Amps outgoing and conforming to HSN code : 8537 complete all as specified and directed. Note :- MCCB & MCB will be measured & paid separately. 180 S&F in replacement MCCB 125 Amps, thermal magnetic release,4 pole 16 kA ICS=ICU Complete all as specified and directed.
Contract Date: May 30, 2026 Contract Value : 3.02 Crore
Statutory Bodies & Commissions/Committees No of Bidders 11
20.
Educational and Research Institute #11191269 AOC
Tender For Supply And Installation Of Furniture At Library And Computer Building. , Furniture , Library Chair -01 -Seat Size: 50.0Cm. (W) X 48.0 Cm. (D) -Back Size: 53.0 Cm. (W) X 39.0Cm. (H) -Injection Moulded Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ & Hardness 16 Kgf. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -M.S. Powder Coated Frames (Dft 50 Microns) For 4 Leg Chairs -M. S Pipe Dia 25Mm (Vendor To Submit Powder Coating Laboratory Test Certificate) -Glass Filled Polypropylene Armrest With The Tubular Frame. -Vendor Should Submit Detail Shop Drawings With All Dimensions. , Office Chair Seat Size- 53.5 Cm. (W) X 51.0 Cm. (D), Of 1.5 Cm Thickness Plywood Preferably Hot-Pressed, Furnished With Fabric Covers -Mesh Back Size- 51.0 Cm. (W) X 70.0 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Glass Filled Nylon Armrest With The Tubular Frame Of 6 Cm Hight(Adjustable) -Center Tilt Synchro Mechanism With Seat Slide & Multi Lock, Revolving 360° -Head Rest Sub-Assembly With Hight Adjustment Up To 4 Cm. -Pneumatic Height Adjustment Of 9.5Cm, Pedestal Assembly Of Polished Aluminium With Twin Wheel Injection Moulded Soft Castors Of Nylon With Pu Lining, Having Up To 6 Cm Wheel Diameter. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation Chair Seat Size- 53.5 Cm. (W) X 51.0 Cm. (D), Of Thickness 1.5 Cm Plywood Preferably Hot-Pressed, Furnished With Fabric Covers. -Mesh Back Size- 51.0 Cm. (W) X 70.0 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Glass Filled Nylon Armrest With The Tubular Frame Of 6 Cm Hight(Adjustable) -Center Tilt Synchro Mechanism With Seat Slide & Multi Lock, Revolving 360° Anti-Shock Mechanism. -Pneumatic Height Adjustment Of 9.5Cm, Pedestal Assembly Of Polished Aluminium With Twin Wheel Injection Moulded Soft Castors Of Nylon With Pu Lining, Having 6 Cm Wheel Diameter. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Chair Seat Size: 49.0 Cm. (W) X 51.4 Cm. (D) Of Thickness 1.2 Cm Plywood Preferably Hot-Pressed, Furnished With Synthetic Leather Over Moulded High Resilience Polyurethane Foam. -Mid Back Size: 51.6 Cm. (W) X 65.7 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 55 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Chrome Plated Up-Down Adjustment Armrest Of 8 Steps. -360° Revolving Type Front Pivot Synchro Mechanism, 4-Position Locking With Anti-Shock Feature, Tilting Ratio Of 1:2, Single Point Control. -Back Height Adjustability, Adjusted In 5 Positions. -Pneumatic Height Adjustment Of 10Cm, Pedestal Assembly (Pedestal- 65 Cm, Pitch-Center Dia. 75Cm) Of Polished Aluminium With Twin Wheel Injection Moulded Castors. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Study Chair With Writing Pad Seat Size : 50.0Cm. (W) X 48.0 Cm. (D) Furnished With Fabric Covers And Moulded Polyurethane Foam -Back Size : 53.0 Cm. (W) X 39.0Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -M.S. Powder Coated Frames Dia 25Mm (Dft 50 Microns) For 4 Leg Chairs With Glass Filled Polypropylene Shoe (Vendor To Submit Powder Coating Laboratory Test Certificate) -The Full Desklet Made Of 1.3 Cm. Thick, Compact Laminate Board. Having Front And Back Adjustment Of 4 Cm -Outer Dimension 59.5±0.1Cm. (W) X 29.0±0.1Cm -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Table With Seating Capacity Of 18Seats 2 Str Main - 1350 X 600 X 740 - 2 Nos. -2 Str Shared - 1350 X 600 X 740 - 2 Nos. -2350W - 2350 X 850 X 740 - 2 Nos. -Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board With A High-Quality Wood Matching 2 Mm Thick Pvc Lipping; Plastic Access Flap Is Provided For Easy Access To Wires And Cables -Under Structure Consists Of 18Mm Thick Pre-Laminated Twin Board Wood Matching 2 Mm Thick Pvc Lipping -Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of Wood Matching 2 Mm Thick Pvc Lipping -Powder Coated Accent Metal Strip Provided Below Work Surface Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent Steel, Epoxy Polyester Powder Coated (Dft 40-60 Microns). (Vendor To Submit Powder Coating Laboratory Test Certificate) -Wire Management- An Array Of Panels Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables. Provision To Mount 6 Module Electric Switch Plate Is Provided Below Worktop. Cut-Out On Top With Two-Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Table With Seating Capacity Of 30 Seats 2 Str Main - 1350 X 600 X 740 - 2 Nos. -2 Str Shared - 1350 X 600 X 740 - 8 Nos. - 2Str -2350 X 850 X 740 - 2 Nos. -Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board With Wood Matching 2 Mm Thick Pvc Lipping; Plastic Access Flap Is Provided For Easy Access To Wires And Cables -Under Structure Consists Of 18Mm Thick Pre-Laminated Twin Board Of High-Quality Wood Matching 2 Mm Thick Pvc Lipping -Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of High-Quality Wood Matching 2 Mm Thick Pvc Lipping -Powder Coated Accent Metal Strip Provided Below Work Surface Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent Steel, Epoxy Polyester Powder Coated (Dft 40-60 Microns). (Vendor To Submit Powder Coating Laboratory Test Certificate) -Wire Management- An Array Of Panels Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables. Provision To Mount 6 Module Electric Switch Plate Is Provided Below Worktop. Cut-Out On Top With Two-Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Two-Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette.(Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Leg Assembly Is A Welded Assembly Made In Stainless Steel Tube & Plate With Plastic Endcap Of 146 X 90 X 85.5 Cm With Seat Height Of 45 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Three-Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layer Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) O Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 206 X 90 X 85 Cm Seat Height 45Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , One Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) Or Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 86 X 90 X 85 Cm Seat Height 45Cm. -Vendor Should Submit Detail Shop Drawing With All Dimensions. Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) O Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 86 X 90 X 85 Cm Seat Height 45Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Mobile Compactor Storage Unit-01 3 Bay Drive Type Compactors With 3 Bay Sd - 1 No, 3 Bay Td - 1 No, 3 Bay Sl - 1 No. 3 -Size Of Compactor 2361H Mm X 915 W Mm X 457D Mm, 3 Bay Channel 2400 Mm - 3 No, 3 Bay Channel 800 Mm - 3 No. -Main Body: Rigid Knock Down Construction Made Of 0.8 Mm Thick. Crca Or Equivalent Grade Steel Having 5 Loading Levels Formed By 4 Adjustable Shelves For 1980 Mm Height Body And 6 Loading Levels With 5 Adjustable Shelves For 2361Mm Height Body. -Main Body Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction: Rigid Knock Down Construction Made Of 0.8 Thick Crca Or Equivalent Grade Steel. Each Body Block Consists Of 1 Main Unit & Then Add-On Units. -Front Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Panel Made Of 0.6 Thick Crca Or Equivalent Grade Steel Fixed Together Using Machine Screws To Prevent Access To Inside Files From The Outside. -Door Frame Made Of 0.8 Thick Crca Or Equivalent Grade Steel Of 2 Vertical Door Stiffeners Providing Rigidity To The Entire Body. -Shelf Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction 12-Bend Panel Made Of 0.7 Thick Crca Or Equivalent Grade Steel Having Max Load Bearing Capacity Is 100 Kg Uniformly Distributed Per Shelf, Height Of 351Mm Between Two Shelves. The Last Loading Level For Shelf Is 1721Mm From Ground Level For 1980H Body And 2107Mm From Ground For 2361H Body. Shelves Are Mounted On Support Brackets & Shelf Level Can Be Adjusted At Approx. 25.4 Pitches. There Are 4 Adjustable Shelves Per Body For 1980H And 5 Adjustable Shelves Per Body For 2361H, Giving 5 And 6 Loading Levels For 1980H And 2361H Body Respectively. -Storage Capacity Made Of 0.8Thick Crca Or Equivalent Grade Steel Having Hinged Door Have Recessed Die Cast Handle Cum Lock With 3 Way Locking Through A Lever & Shooting Bolt And Can Hold Up To 10 Nos. Of Box Files -Under Structure Construction Welded Frame Suitably Fabricated To Bear The Loads Based On Configuration Consists Of The Main Channel, Body-Fixing Channel, U-Channel, And Z-Channel Made Of Hr Sheet 3 Mm Thick. -Under Structure Construction Finish Epoxy Polyester Powder Coat Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Movements Of The System Is Drive Type Configuration Achieved By Rotating A Pu Hand Wheel Connected To The Rollers Through A ‘Sprocket-Chain Arrangement Mounted On The Side Of The Body Covered By A 1 Mm Thick Crca Or Equivalent Grade Steel Sheet Drive Unit Cover With Dimensions 1202Mm X 398Mm X 87Mm -Rail Channels- A ‘C Section 3 Mm Thick Hr Sheet On Which Rail Ms Bright Bar Of Sq 25.4Mm Is Firmly Fixed From Bottom Using Counter Sunk Screws. The Rail Channels Are Of 3 Lengths I.E., 800Mm, 1600Mm And 2400Mm. Label Holder Is An Aluminium Extrusion Of Length 453Mm For Ld/Sd And 910Mm For Td, Fitted On To Front Cover Of Body. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Mobile Compactor Storage Unit -02 3 Bay Drive Type Compactors With 3 Bay Sd - 1 No, 3 Bay Td - 2 No, 3 Bay Sl - 1 No. -Size Of Compactor 2361H Mm X 915 W Mm X 457D Mm, 3 Bay Channel 2400 Mm - 1 No, 3 Bay Channel 800 Mm - 1 No. -Main Body : Rigid Knock Down Construction Made Of 0.8 Thick. Crca Or Equivalent Grade Steel Having 5 Loading Levels Formed By 4 Adjustable Shelves For 1980 Mm Height Body And 6 Loading Levels With 5 Adjustable Shelves For 2361Mm Height Body. -Main Body Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction: Rigid Knock Down Construction Made Of 0.8 Thick Crca Or Equivalent Grade Steel. Each Body Block Consists Of 1 Main Unit & Then Add-On Units. -Front Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose -Back Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Panel Made Of 0.6 Thick Crca Or Equivalent Grade Steel Fixed Together Using Machine Screws To Prevent Access To Inside Files From The Outside -Door Frame Made Of 0.8 Thick Crca Or Equivalent Grade Steel Of 2 Vertical Door Stiffeners Providing Rigidity To The Entire Body -Shelf Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction 12-Bend Panel Made Of 0.7 Thick Crca Or Equivalent Grade Steel Having Max Load Bearing Capacity Is 100 Kg Uniformly Distributed Per Shelf, Height Of 351Mm Between Two Shelves. The Last Loading Level For Shelf Is 1721Mm From Ground Level For 1980H Body And 2107Mm From Ground For 2361H Body. Shelves Are Mounted On Support Brackets & Shelf Level Can Be Adjusted At Approx. 25.4 Pitches. There Are 4 Adjustable Shelves Per Body For 1980H And 5 Adjustable Shelves Per Body For 2361H, Giving 5 And 6 Loading Levels For 1980H And 2361H Body Respectively. -Storage Capacity Made Of 0.8Thick Crca Or Equivalent Grade Steel Having Hinged Door Have Recessed Die Cast Handle Cum Lock With 3 Way Locking Through A Lever & Shooting Bolt And Can Hold Up To 10 Nos. Of Box Files -Under Structure Construction Welded Frame Suitably Fabricated To Bear The Loads Based On Configuration Consists Of The Main Channel, Body-Fixing Channel, U-Channel, And Z-Channel Made Of Hr Sheet 3 Mm Thick. -Under Structure Construction Finish Epoxy Polyester Powder Coat Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Movements Of The System Is Drive Type Configuration Achieved By Rotating A Pu Hand Wheel Connected To The Rollers Through A ‘Sprocket-Chain Arrangement Mounted On The Side Of The Body Covered By A 1 Mm Thick Crca Or Equivalent Grade Steel Sheet Drive Unit Cover With Dimensions 1202Mm X 398Mm X 87Mm -Rail Channels- A ‘C Section 3 Mm Thick Hr Sheet On Which Rail Ms Bright Bar Of Sq 25.4Mm Is Firmly Fixed From Bottom Using Counter Sunk Screws. The Rail Channels Are Of 3 Lengths I.E., 800Mm, 1600Mm And 2400Mm. Label Holder Is An Aluminium Extrusion Of Length 453Mm For Ld/Sd And 910Mm For Td, Fitted On To Front Cover Of Body. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Magazine Stand Overall Dimensions 900Mm(W)X450Mm(D)X1830Mm(H). -Steel Periodical Display Rack Providing, Placing And Supplying Of Display Rack. -Rigid Knockdown Construction, Panels Shall Be Made From Crca Or Equivalent Grade Steel 0.6 Mm Thick -Front Frame Shall Be Made From Crca Or Equivalent Grade Steel 0.8 Mm Thick. Crca Or Equivalent Grade Steel D Grade. -There Shall Be 5 Level Racks, Suitable For Full Cape Size Magazines, Periodicals, Aesthetically Appealing Metal Tray At An Angle For Easy Viewing. -Receding Facility To Access The Storage Behind. -Uniformly Distributed Load Capacity Per Each Shelf Is 40 Kg. -Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) Vendor Should Submit Detail Shop Drawing With All Dimensions. , Storage Cabinet 1 Body Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edge Band. The Shelves Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Back Panel Is 9Mm White Plt Assembled With Suitable Fittings. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. -Doors Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Centre Of The Door Having Suitable Hinges And Hdu Is Fitted With Height Adjustment And Has A Three-Point Lock. -All The Storages Are Fitted With A 6 Mm Leveller At Bottom For Levelling As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Storage Cabinet -02 Body Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edge Band. The Shelves Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Back Panel Is 9Mm White Plt Assembled With Suitable Fittings. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. -Doors Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Centre Of The Door Having Suitable Hinges And Hdu Is Fitted With Height Adjustment And Has A Three-Point Lock. -All The Storages Are Fitted With A 6 Mm Leveller At Bottom For Levelling As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Library Table 1 1650 X 600 Desk Based Modular Workstation With System Ht-750 Mm. -Partial Screens: Fabric T- Mould, 19Mm Thick Screen Of 450Mm Ht., Mounted On Studs. -Legs: Providing Metal Powder Coated Cube Leg Vertical (40X40Mm)& Rigid Support (50X30Mm). Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Understructure Comprising Of Metal Powder Coated Cross, Made Up Of Metal Powder Coated Finish -Wire Management: Electric Switch Plate Of 8+3 Module For Power And Data Points. -Worksurface - 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 1650 Mm W X 600 Mm D. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Library Table -2 2400 X 1200 Providing And Placing Modular Workstation Desk Based Modular Workstation With System Ht - 750 Mm. -Legs: Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Understructure Comprising Of Metal Powder Coated Cross, Made Up Of Metal Powder Coated Finish -Wire Management: Electric Switch Plate Of 8+3 Module For Power And Data Points. -Worksurface - 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 2400 Mm W X 1200 Mm D. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Reception Table Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade Confirming To Edge Banded With Matching 2 Mm Thick Pvc Lipping. -Wire Managementu-Access Flap Along With A Grommet Is Provided On Work Surface For Wire Management. Power Box Made With 0.8 Mm Thick Crca Or Equivalent Grade Steel, With Electric Switch Plate Of 8+3 Module Which Is Fixed With Worktop Along The Width Ataccess Flap Position. Wire Riser Made Of 0.8Mm Crca Or Equivalent Grade Steel Is Provided For Proper Wire Management. -Modesty Panel & Side Skirting - Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping. -Under Structure And Top Shelf - Made Of 18 Mm Thick Pre-Laminated Twin Board Of High-Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping - Hinge Door + Drawer Unit - Made Of 18Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Bottom Is Made Of 5.5Thick Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Are Provided With Cam Lock For Security. -Organizer Plate Made Of 1.2Mm Crca Or Equivalent Grade Steel Is Provided For Magnetic Sticky Notes. -Bag Hanger Hook Made Of 1.2Mm Crca Or Equivalent Grade Steel Is Provided For Bag Hanging 2400 X 1770 X 870 Mm , Side Table Providing, Supplying And Placing Of Side Table. -Side Table Glass Is 10 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade Or Equivalent For Facing With Under Structure. -Under Structure Is A Welded Assembly Made In Ss202 Or Equivalent Grade -Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions , Central Table Providing, Supplying And Placing Of Coffee Table. -Center Table Glass Is 10 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Or Equivalent Grade For Facing With Under Structure. -Under Structure Is A Welded Assembly Made In Ss202 Grade Or Equivalent -Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions , Round Table Circular 900Mm Providing And Placing Meeting Tables With Worktop Height - 750 Mm. Cube Legs Vertical (40X40Mm).Rigid Support-(50X30Mm) Are Available For Work Top Level 750 Mm From Base. -Worktop Is 25Mm Thick Prelaminated Particle Board With Pvc Lipping As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Table A- 750X1500 Providing And Placing Desk Based Modular Workstation With System Height - 750 Mm. -Legs Providing Metal Powder Coated Cube Leg Vertical (40X40Mm) Rigid Support (50X30Mm). Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Under Structure Made Up Of Metal Powder Coated Finish And The Entire Assembly Are Fixed To The Worktop. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. . (Vendor To Submit Powder Coating Laboratory Test Certificate) -Metal Modesty And Wooden Modesty Are Mounted On The Worktop Perforated With The Help Of The Modesty Mounting Brackets At 400 Mm From Ground. -Worksurface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500X 750 Mm For Main Table As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Meeting Table Eight-Seater 2350 X 1150 Mm Work Top Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood; Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. -Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of High-Quality Wood; Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. Aluminium Alloy 63400 Or Equivalent - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. Beside Each Cut-Out, An Additional Cut-Out With Plate Is Provided For Mounting Audio-Visual Cables (E.G. Hdmi, Vga-A, Etc.) Vendor Should Submit Detail Shop Drawing With All Dimensions , Table B Supplying And Placing In Position Main Table, Of Dimension 1800X2100X750 Mm. -Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc. -Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc. -Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood, Edge Banded With Matching 2 Mm Thick Pvc Lipping.  Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc Membrane Pressed On To Top. Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Modular, Space-Optimizing Desk With Bench N (Three-Seater Curved) Providing, Supplying And Placing Of Desk Cum Bench N Seater Product Which Provides An Elegant, Modular Solution With 360-Degree Swivel Seat For Easy Entry/Exit And Height-Adjustable -Legs Are Made Of Ms Erw Or Equivalent Tube Section Of Size 75X25X2 Mm Thick Oval Tube With 5 Mm Thick Hr Bracket Sand 2Mm Thick Crca Or Equivalent Grade Steel Brackets On To The Tubes. -Assembly Is Powder Coated With Epoxy Polyester. Leg Height Varies From 705 To 1005 In Pitch Of 50 As Per Layout. Sturdy Anchoring By Anchor Bolts On To Base Of 8Mm Thick Plate For Proper Resting Of Leg. Shoe Made Of Nylon Are Provided At The Bottom For Covering The Base Plate. -Two Side Clads Made Of E18 Mm Thick Plate With 0.8Mm Thick Pvc Lapping And On The Outside Covered With Welded Metal Structure Made Of 2 Mm Thick Crca Or Equivalent Grade Steel Powder Coated With Epoxy Polyester. -Worktop Are Made Of 25 Mm Thick Pre-Laminated Board Of High-Quality Wood; All The Edge Of Work Surface Should Provide With Machine Pressed 2 Mm Thick Pvc Edge Band Glued With Hot Melt Glue. -Seat Has Self-Closing Mechanism. Seat Under Structure Is Made From Combination Of Welded Fabricated Structure Of 5Mm Thick Hr And 8Mm Thick Ply With Moulded Pu Foam Of Density 55 Kg/Cu.Mtr. With Stitched Fabric Made Of Leatherette Or Foam Back Fabric. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Seat Back Is Made From Combination Of 8Mm Thick Ply With Moulded Foam On Top Which In Turn Is Covered With Stitched Upholstery Made Leatherite As Per Or Foam Back Fabric. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Seat Support Frame Is Made From Combination Of Ms Erw Or Equivalent Grade Tube Section Of Size 80X40X2.5 Mm Thick Rectangular Tube And Ms Erw Tube Section Of Size 48X19.1X2 Mm Thick Oval Tube Welded Together. Assembly Is Powder Coated With Epoxy Polyester. -Modesty Is Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood, All The Edge Of Modesty Are Provided With Machine Pressed 2 Mm Thick Pvc Edge Band Glue With Hot Melt Glue. Vendor Should Submit Detail Shop Drawing With All Dimensions . , Table C 1650X600X770Mm Providing, Supplying And Placing Of Conference Table With Product Size 1650 X 600 X 770Mm -Worktop Should Be Made Of 25Mm Thick High-Quality Wood, Edges Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. -All Tables Are Provided With Heavy Duty Table Connector Made With Metal Integrated Engineering Plastic. -Modesty Should Be Made Of 15Mm High Quality Wood, Edges Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. -Recta Table Modesty Is Provided With A Latch Made Of 2Mm Thick Crca Or Equivalent Grade Steel And Is Powder Coated With Min 45-Micron Thickness Of Epoxy Polyester Coating. Latch Is Fixed With Knurled Bush Made Of 20Mm Dia Ms Rod In A Black Finish. Latch Can Be Used To Align Modesty If Two Or More Recta Tables Are Connected Side By Side. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Modesty Is Provided With Rubber Stopper Made Of Tpe Rubber To Reduce Banging While Folding Table. -Legs Should Be Made By Welding The Combination Of Ms Erw Or Equivalent Grade Round Tube Ø63.5 X 2Mm Thick, Flanges Made Crca Or Equivalent Grade Steel Sheet Of 1.6Mm Thick And 1.2Mm Thick Inside Plates Made Of Hr 5Mm Thick Sheet. Assembly Is Epoxy Polyester Powder Coated (Min 45 Micron). -Legs Are Provided With Casters Of Ø65 Mm Lockable Type For Ease Of Movement And Can Be Locked When Required At Any Position. Each Castor Is Also Provided With 2 Knurled Disk Of 50Mm Dia And 5 Mm Thick Made Of Ms Bar With Zn Black Finish For Levelling Adjustment Of 10Mm.. -Table Top Connected With Spring Loaded Mechanism With Pull Handle Made Of Ms Erw Ø16X1.2Mm Thick With An Insert Tube Of Ø12.7X1.6Mm Thick Tube. Coated With Epoxy Polyester Powder Coated (Min 45 Micron) To Operate Table Top. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Table Top With Modesty Folds Upside At Offset Centre Pivot Provided On Support Bracket Which Is Aluminium Alloy Pressure Die Cast Part Coated With Epoxy Polyester Powder Coat (Min 45 Micron). Modesty Is Connected To Worktop With 90 Deg Rotating Hinge Made Of Engineering Plastic. -All Type Of Tables Are Provided With Power Box Which Has Two Universal Power Socket Of 2 Annual Periodical Maintenance Each, One Switch Of16 Annual Periodical Maintenance And 1 Fuse Of 4 Annual Periodical Maintenance With 1000Mm Cable With Male And Female Gst Connector. -All Tables Are Provided With Wire Channel And Wire Clip Made Of 1.2Mm Thick Spring Steel And Is Powder Coated With Min 45 Micron Thickness Of Epoxy Polyester Coating (Vendor To Submit Powder Coating Laboratory Test Certificate) Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation L Type Providing And Placing Desk Based Modular Workstation With System Height - 1200 Mm. -Partial Screens: Fabric T- Mould, 19Mm Thick Screen Of 450Mm Ht., Mounted On Studs. -Legs Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. -Under Structure Made Up Of Metal Powder Coated Finish And The Entire Assembly Is Fixed To The Worktop. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. -Worksurface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 1500X1500X600 Mm. -Metal And Wooden Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390W X 435D X 646Ht, 1Dr = 1 Box + 1 File, Central Locking. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation 2 -900X600Mm Providing And Placing High-Functionality, Modular Office Workstation System & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thick And Ht - 1200 Including Powder Coated Aluminium Trims. -Fin Are 22.5 Mm Thick Panel Which Are 18 Mm Thick Ply Boards Wrapped With Fabric At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. -Wire Management: Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Up To The Panels Through Concealed Conduits Inside The Blocks. -Half Screen With Frame At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Finish. -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor -Work Surface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 900 Mm W1 X600 Mm D As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation 3- 900X600Mm Providing And Placing High-Functionality, Modular Office Workstation System & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thick And Ht - 1050Mm Including Powder Coated Aluminium Trims. -Fin Are 22.5 Mm Thick Panel Which Are 18 Mm Thick Ply Boards Wrapped With Fabric At Intermediate Level. Bottom Block Is Finished In Metal Finish. -Wire Management: Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Up To The Panels Through Concealed Conduits Inside The Blocks. -Half Screen With Frame At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Finish. -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor -Work Surface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 900 Mm W1 X600 Mm D As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Main Table 1650 X 750, Eru- 1200W X 450D With Pedestal Modular Desk-Based System Of Height 750 Mm. -Cube Legs Are Fabricated By Argo Shield & Have A Square Section. Cube Legs(40X40Mm) And Rigid Support (50X30Mm) Are Available For Work Top Level 750 Mm From Base. -Wire Management: Single Power Box With Raiser For Manager Modules, Single Tables (8+3 Anchor Roma). Soft Closing Access Flap With Brush. -Metal Modesty Is Made From 0.8 Mm Thick Crca Or Equivalent Grade Steel. Metal Modesty Is Mounted On The Worktop With The Help Of The Modesty Mounting Brackets. -Worktop Of 25Mm Thick Prelaminated Particle Board With Pvc Lapping. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390X435X646 Mm, 1Dr = 1 Box + 1 File, Central Locking. Vendor Should Submit Detail Shop Drawing With All Dimensions , Modular, Space-Optimizing Desk Legs Are Made Of Ms Erw Or Equivalent Grade Tube Section Of Size 75X25X2 Mm Thick Oval Tube With 5 Mm Thick Hr Brackets And 2Mm Thick Crca Or Equivalent Grade Steel Brackets Welded On To The Tubes. Assembly Is Powder Coated With Epoxy Polyester. Leg Height Varies From 705 To 1005 In Pitch Of 50 As Per Layout. Sturdy Anchoring By Anchor Bolts On To Base Of 8Mm Thick Plate For Proper Resting Of Leg. -Shoe Made Of Nylon Are Provided At The Bottom For Covering The Base Plate. -Two Side Clads Made Of 18 Mm Thick Plate With 0.8Mm Thick Pvc Lapping And On The Outside Covered With Welded Metal Structure Made Of 2 Mm Thick Crca Or Equivalent Grade Steel Powder Coated With Epoxy Polyester. -Worktop Are Made Of 25 Mm Thick Pre-Laminated Board Of El-P2 Grade And Approved Shade. All The Edge Of Work Surface Are Provided With Machine Pressed 2Mm Thick Pvc Edge Band Glued With Hot Melt Glue. -Modesty Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade. All The Edge Of Modesty Are Provided With Machine Pressed 2 Mm Thick Pvc Edge Band Glue With Hot Melt Glue As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions.
Contract Date: Jun 06, 2026 Contract Value : 6.64 Crore
Government Departments No of Bidders 8
Maharashtra View Result →
21.
Public Administrative Department #11181011 Price Bid
Tender for Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. , Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Supplying And Drawing Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3X1.5 Sqmm , Providing And Laying In Position M25 Grade Reinforced Cement Concrete Foundation Of Size 450 Mm(L) X 450 Mm Wide And 1000 Mm Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -960 Mm Long (Approx.) - 8 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 1400 Mm (Approx.) - 6 Nos. (With 150 Mm Spacing) As Required With Supplying And Positioning Of 4 Nos Foundation Bolts Of Size 16Mm Dia And 600 Mm Long J Type I/C 2 Nos. Template Anchor Plates Of Size 225X225x3 Mm And Providing Dwc Hdpe For Cable Entry & Exit As Required For 3 M And 5 Mtr Pole. , Fabrication, Supply & Erection Of 5.0 Mtr Height, Minimum 3 Mm Thick, Bottom Dia Of 130Mm & Top Dia Of 70Mm, Base Plate Of Size 225 X 225 X 12 Mm Thick Flange Mounted Hot Dip Galvanized Octagonal Pole Made From Ht Steel Plate, Window With Flash Cover With Full Vertical Window Cover At Appropriate Height From The Base Plate On Existing Cement Concrete Pedestal As Required. L/C Supplying And Fixing Of 6 Mm Thick Laminated Mounted Sheet Inside The Window And L/C Providing And Welding 3 Nos. Gi Strips 4 Mm Thick Of Suitable Length And Having Suitable Size Tapped Holes As Reqd, Terminal Block Suitable For 25 Sq Mm Conductor - 4 Nos. & Shorting Links On Din Channel L/C Providing And Fixing Din Channel Of Suitable Length, 6 Amp. Spmcb C Curve Characteristics, Earth Stud, Cable Support Clamp Suitable For Upto 4X25 Sqmm Cable. Logo/Name Of Manufacturer Shall Be Either Embossed Or Rivited Plate On The Pole. Galvanization As Per Relevant Is Code Etc As Required , Fabrication Supplyiing And Fixing B-Class Galvanised Single Overhang Arm Bracket Made Out Of 250 Mm Long Galvanized Top Tube With Cap 1000Mm Long 32 Mm Dia Galvanized Pipe With Tightening Bolts Complete As Reqd. , Fabrication Supplyiing And Fixing B-Class Galvanised Double Overhang Arm Bracket Made Out Of 250 Mm Long Galvanized Top Tube With Cap 1000Mm Long 32 Mm Dia Galvanized Pipe With Tightening Bolts Complete As Reqd. , Fabrication,Supplying,Installation,Testing,Commissioning Of 12 Mts.High Mast System With Its Accessories ,Mast Shaft Shall Be In One Section , Hot Dip Galvanized 4Mm Thick (Single Dip ) Inside And Out Sides And Suitable For Wind Velocity As Per Is 875 Part3 .There Shall Be In Longitudinal Seam Weld Per Section And No Circufrential Weld. It Should Also Included Accessories For High Mast Head Frame ,2 Point Suspension System With Steel Wire Rope 5Mm Dia. (7/19Construction) Single Drum Winch ,Galvanized Lantern Carriage Arrangement Suitable For 4/6 Nos. Flood Light Luminaries Luminaries Symmitrically And Its Control Gears Boxes And Lighting Finial ,The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panel Housing Suitable Reinforced Cement Concrete (1:2:4) Shallow Foundation Of Size 1M(L)X1m (W)X2m Deep I/C Excavation Of Earth I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Rewinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100 Mm Long (Approx.) - 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 3700 Mm (Approx.) - 13 Nos. (With 150 Mm Spacing) As Required With Positioning Of 4 Nos Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For High Mast Considering The Safe Soil Bearing Capacity At Site As 10T/Sqm At 2Mts. Depth With All Material I/C,4Nos S.P Mcb,63Amp.Dpisolator Etc As Reqd. Logo/Name Of Manufacturer Shall Be Embossed On The Pole. Galvanized As Per Relevant Is. , Supply And Fabrication Of Pole Protection System Made Up 8 Swg Steel Wire Mesh Of Size 25 Mm X 75 Mm Rectanglar With 50 Mm X50 Mmx6mm Ms Angle Iron For Supporting The Mesh I/C Mv Danger Plate And Grounding The Protection System In Suitable Quality Of cement concrete Etc. , Providing And Fiving Name Board Made Of Ms Sheet 90X60cm, 1Mm Thick With Frame Of Ms Angle 50X50x6mm, Two Diagonal Braces At The Back Of The Sheet Of Ms Flat 40X6mm, Total Height Of The Board Above Ground Level 2.40M, Length Of Legs Below Ground 0.30M Embedded In Cement Concrete Block 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20Mm Nominal Size) 30X30x45cm Including Excavation And Removal Of Surplus Earth With In 50M Lead, Applying Priming Coat Of Approved Steel Primer, Painting With Synthetic Enamel Paint Of Approved Quality And Lettering With Enamel Paint Of Approved Colour (One Side) As Per Drawing/Direction Of Engineer-In-Charge , Providing And Fixing Of Stainless Steel Name Plate Of Size 6X8 Sq Inch Made Of 20 Gauge Sheet Including Engraved Name Of Area Representative Duly Painted Along With Ss Clamp Nut Bolt Etc As Required. , Supply Of Xlpe Insulated,Pvc Sheathed Al.Conductor Armoured Cable 1.1Kv Grade Conforming To Is 7098/1988 Of Following Sizes (A) 2 X6 Sqmm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Excavation Of The Cable Trenches In Hard Rock Not Exceeding 1.5 Metres In Width, And Lift Upto 1.5 Metres, Including Getting Outthe Excavated Soil And Disposal Of Excavated Soil As Directed Within A Lead Of 50 Metres , Providing And Laying In Position Cement Concrete Of Specific Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level:1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources. , Supplying And Fixing Of Light Class G.I. Pipe Of 50 Mm Dia. (Nominal) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All 51 Delhi Schedule Of Rates (E&M)-2025 Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Led Flood Light, Powder Coated Pressure Die Cast Aluminium (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, 54 Delhi Schedule Of Rates (E&M)-2025 Emi-Emc As Per Cispr-15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led, Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) , Sdcm (Standard Deviation Colour Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output. Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 100W
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 6
22.
Public Administrative Department #11181007 Price Bid
Tender for Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required , Providing And Laying In Position M25 Grade Reinforced Cement Concrete Foundation Of Size 450 Mm(L) X 450 Mm Wide And 1000 Mm Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -960 Mm Long (Approx.) - 8 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 1400 Mm (Approx.) - 6 Nos. (With 150 Mm Spacing) As Required With Supplying And Positioning Of 4 Nos Foundation Bolts Of Size 16Mm Dia And 600 Mm Long J Type I/C 2 Nos. Template Anchor Plates Of Size 225X225x3 Mm And Providing Dwc Hdpe For Cable Entry & Exit As Required For 3 M And 5 Mtr Pole. , Fabrication Supplyiing And Fixing B-Class Galvanised Double Overhang Arm Bracket Made Out Of 250 Mm Long Galvanized Top Tube With Cap 1000Mm Long 32 Mm Dia Galvanized Pipe With Tightening Bolts Complete As Reqd. , Supply Of Xlpe Insulated,Pvc Sheathed Al.Conductor Armoured Cable 1.1Kv Grade Conforming To Is 7098/1988 Of Following Sizes (A) 2 X6 Sqmm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Providing And Laying In Position Cement Concrete Of Specific Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level:1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources. , Supplying And Fixing Of Light Class G.I. Pipe Of 50 Mm Dia. (Nominal) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. , providing and Fixing Hot Press Sheet Moulded Compound (Smc) Fire Retradant (Temp.Resistance Up To 200 C),Ip 55Weather Proof Pole Box Of Inner Dimension 300X200x105 Mm (Ns)And Outer Dimension Of 333X233x150 Mm High Dome Complete With Suitable Arrangement For Fixing Of 4 Nos Of 6 To 32Amp Single Pole Mcb &63 annual periodical maintenance .Double Pole Isolator (Mcb/Isolator Excluded)With Netural Link Duly Shorting On Din Channel With 2 Nos Of Ms Clamps With Ss Back Plate Of Suitable Sizewith Danger Monogram Property Printed On The Cover Etc As Reqd. , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All 51 Delhi Schedule Of Rates (E&M)-2025 Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.(A) Single Pole , Supply And Fabrication Of Pole Protection System Made Up 8 Swg Steel Wire Mesh Of Size 25 Mm X 75 Mm Rectanglar With 50 Mm X50 Mmx6mm Ms Angle Iron For Supporting The Mesh I/C Mv Danger Plate And Grounding The Protection System In Suitable Quality Of cement concrete Etc. , Painting With Synthetic Enamel Paint Of Superior Brand And Manufacturer, To Give An Even Shade Of Black Colour. Two Or More Coats On 12 Mtr Shml Complete As Required. , Painting With Synthetic Enamel Paint Of Superior Brand And Manufacturer, To Give An Even Shade Of Black Colour. Two Or More Coats On 3 Mtr To 5 Mtr M.S. Pole Complete As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 1
23.
Defence #11150449 AOC
Tender For Provision Of Offers Mess Under Ge (N) Udhampur; 2 Construction of block of Offrs Mess complete all as shown on drawings and as specified. 3 Construction of block of Servant Quarter complete all as shown on drawings and as specified. 4 Construction of block of Car Garage (09 Cars) complete all as shown on drawings and as specified. 5 TotalAmount of Sch A Part - II (Internal Water Supply Work) 6 TotalAmount of Sch A Part - III (Internal Electric Supply Work) 7 TotalAmount of Sch A Part - IV (Plumbing Work) 8 TotalAmount of Sch A Part - V(Area Drainage Work) 9 TotalAmount of Sch A Part - VI (Sewage Disposal Work) 10 TotalAmount of Sch A Part -VII (Road, Path, Culvert and Hard Standing Work) 11 TotalAmount of Sch A Part - VIII (External Water Supply Work) 12 TotalAmount of Sch A Part - IX (External Electric Supply Work) 13 TotalAmount of Sch A Part -X (Compound Wall , Fencing and Gate Work) 14 TotalAmount of Sch A Part -XI (Hot Water Supply Work) 15 Sch A Part - XII (Misc Items of work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as Rs. 0.00 under col.5 signifies this fact only. 16 Construction of septic tank for 50 users (Brick construction) complete all as shown on drg No. CEUZ /TD-1585/2021 sheet 1/4 to 4/4 and as specified. 17 Construction of soakage well (Brick construction) 1.8m dia and 3.0m deep below inlet pipe level (depth from inlet pipe to ground level 45cm), complete all as specified and shown on drg No. CEUZ/TD-1585/2021 sheet 1/4 to 4/4. 18 Supply, installation and comminssioning of water cooler, fully stainless steel, electric driven single phase having storage capacity 120 litres and nominal cooling capacity of 60 Litres per hour, fitted with hermetically sealed air compressor operating on refrigerant R-134a or 410a, conforming to IS-1391 Part-II) complete all as specified and directed. 19 Supply, installation and comminssioning of refrigerator, double door BEE 5 star rated frost free, digital inverter with hermetically sealed compressor of min capacity 256 litres suitable to use on 230 volt, AC supply complete all as specified and directed. 20 Supply, installation and comminssioning of metal top deep freezer BEE 5 star rated hard top having capacity 320 litres, double door, single phase 240 V, 50Hz, complete all as specified and directed. 21 Voltage stabilizer for automatic operation, single phase naturally air cooled, indoor type, wall mounted type & designed for input variation between 170 volts to 250 volts with output stabilized voltage at 230 volts with accuracy of ± 2.5% and of capacity 2 KVA, complete all as specified and directed. 22 Supply, installation, testing and comminssioning hi wall split unitsindoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating inverter technology and EER 3.2, single phase, capacity 1.5 TR, complete all as directed. 23 Supply, installation, testing and comminssioning hi wall split unitsindoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating inverter technology and EER 3.2, single phase, capacity 2.0 TR, complete all as specified and directed. 24 Voltage stabilizer for automatic operation, single phase naturally air cooled indoor wall mounted type & designed for input variation between 170 volts to 250 volts with output stabilized voltage at 230 volts with accuracy of ± 2.5% and of capacity 4 KVA, complete all as specified and directed. 25 Voltage stabilizer for automatic operation, single phase naturally air cooled indoor wall mounted type & designed for input variation between 170 volts to 250 volts with output stabilized voltage at 230 volts with accuracy of ± 2.5% and of capacity 5 KVA, complete all as specified and directed. 26 Supply, installation, testing and commissioning of solar hot water heating system (Flat plate collector) based on indirect transfer of heat for 300 liters as per IS-12922 and IS-12978 with electrical backup of 2KW, including angle iron support (60mmx60mmx6mm) with nut, bolts, washers and painting with two coat of synthetic enamel paint over one coat of red oxide primer for mounting of hot water plant and cold storage tank, complete all as specified and as directed.Note:- Cold water storage tank shall be measured and paid separately. 27 Construction of valve pit of size (90x60x60)cm (Internal dimensions) using PCC (1:4:8) type D-2, using 40mm graded crushed stone aggregate for foundation 10cm thick and 100mm off sets on all sides, 230mm thick brick masonary walls built in cement mortar (1:6), 15mm thick rendering all around the masonry work in cement (1:6), for internal and up to 15cm below GL for external surfaces of walls, 50mm thick PCC (1:2:4) type B-1 coping with 20mm graded crushed stone aggregate including necessary form work for grouting including 3.15mm thick, MS top sheet cover double door with locking arrangement welded to MS frame made out of (50x60x6)mm angle iron frame fixed with hold fasts in coping including painting of steel surface with two coats of synthetic enamel paint over a coat of redoxide primer as finishes coat including necessary excavation in any kind of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as specified and directed. 28 Supply , installation, testing & commissioning of transformer of capacity 100KVA step down outdoor type level - III, copper wounded, 11/0.433KV (at no load) AC 3 phase, vector group Dyn 11, 50HZ on secondary side double wound oil immersed naturally air cooled with external cooling tubes /radiator , delta connected as on primary and star connected with netural brought out on secondary side and having tapping at -2.5% to +7.5% in steps of 2.5% to be changed by external hand operated self position off load tap change switch. Also provision shall be made for locking the taping switch handle in position. The maximum temperature rise shoud not exceed 35 degree centigrade on top of oil when measured on thermometer and 40 degree centigrade in HV/ LV winding when measured by the resistance method after continuous full load run in ambient temperature the transformer shall confirming to IS 1180-2014 transformerlossess shall be as per latest ammendment No IV as per IS 1180 part - I 2014 and comprising of following accessories complete all as specified and as directed. (Contd.../) 29 a) 03 No porcelains HV bushing with arching horns on HV side suitable for 11 KV complete with bushing rods nuts.b) 01 No cable end box on LV secondry side consisting of 05 No porcelain bushing (One No neutral earth, One No Neutral and 3 No for phaseconnected bushing) with bushing rods and nuts washers and cable glands suitable for reception of out 3.5 core 400 Sqmm cable 3 runs, LT 1100 V grade XLPE insulated heavy duty including gland joint complete. c) Oil conservator with filter type drain valve and oil level guage.d) Dehydrating breather with first filling of dehydrating agent e) Explosive vent.f) THERMOMETER pocket including temperature gaugeg) Two earthing terminal on tank body to facilitate fixing of 32x6mm GI strips.(Contd.../) 30 h) OneNo thermometer dail type vapour pressure type having range 0-120 degree centigrade with maximum temperature indicator and re-setting device to maximum temperature including needle of temperature gauge : Max reading painted terminal.i) Rating plate with terminal plate.j) Oil level guage.k) Oil drain filter valve.l) Oil filling hole on top cover with plug.m) Air release valve/plug.n) 4 Nos plain solid cast steel detachable rollers. o) First fill of tranformer oil conforming to relevent ISI and tested upto 60 KV dielectric strength.p) Two No lifting hook at side of transformerNote : Transformer must be as per Energy efficiency Level-3 of IS: 1180:2014 with amendment No. 4. 31 Construction of PCC platform for transformer of size 3m x 3m and 1m high from ground level with brick construction in walls and steps, PCC 1:5:10 type E-2 in foundation, brick workin CM 1:4, 10mm thick rendering in CM 1:4 to walls, 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushedstone aggregate). In flooring40mm thick PCC on steps, painting to fencing with two coats of synthetic enamel paint over a coat of red oxide primer complete duly surrounded with XPM fencing of length not less than 15 meter and width not less than 10 meter complete with 40mmx5mm angle iron & 12mm dia steel bars, fixed on PCC gate pillers complete including sliding bolt, locking arrangements hinges and all accessories,shown on drawing No CE/TD/1129/96 sheet No. 1/2 & 2/2complete all as specified. 32 Earthing complete with galvanized steel earth plate electrode600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.Note:- On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction. 33 10W decorative inverted tripod type LEDBollard with IP-65 protection, soft 360 degree light distribution body made of die cast aluminium & in triangular shape including 10 W LED with IP 65 ingress protection, 4 KV surge protection, Luminaire should have high efficiency isolated poted driver minimum height of bollard 800mm & with 180mm OEM should have inhouse NABL approved Lab & submit LM-79 report along with NABL certificate, PCC foundation with necessary nuts & bolts complete all as directed by GE. 34 Post top lantern, LED type, 40 watt including40 watt LED AC, outdoor type with decorative post top for 360 degree indirect light IP 66 protection with impact, glare free and better uniformity and corrosion resistant, LED driver shall be constant current type potted driver, luminaire shall have surge protection devices of minimum 10KV inside the driver compartment. Total harmonic distortion shall be <10% with power factor minimum 0.95.The driver shall have an effiviency>85%. It should give consistent performance in the input voltage range of 120V-270V at 50Hz, luminaire shall be embossed or screen printed with manufacturer name/logo, OEM should have in house NABL approved lab and submit LM79 report along with NABL certificate, PCC foundation with necessary nuts and bolts complete with driver and lamp complete all as specified and as directed. 35 Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground ( earth pit not less than 2.25 mtr below normal ground level) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size (32x6)mmas earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead with 15 cm thick alternate layers of charcoal dust & common slat including PCC pit in PCC 1:2:4 type B-1, RCC covermade out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle andangle iron (40x40x5)mm frame, GI medium grade watering pipe 20mm bore and funnel with wire mesh, GI light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and directed. Note: - On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction. 36 Sintex box of size 155mmX210mmX92mm, hinged (L) wiith 2 way connector mounted on epoxy insulators for looping of cablefor phase and neutral fixed on polewith the help of MS nuts bolts and MS clamps; 2 No of size 40mm X 4mm thick, with one No MCB SP 6 Amp capacity mounted on din rail inside box, including making suitable hole in pole to take out connections to fitting if required at site and provisioning of conector of street light, complete all as specified.Make:- Hensel, Sintex or equivalent make approved by GE. 37 LED street light fitting 70 Watt, 230 V, AC, outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, complete all as specified and directed. 38 Supply, installation, testing and commissioning offactory made outdoor type CPRI approved dust and vermin proof LT panel board front opening (double shutter) with locking arrangement of suitable size made out of 3.15 mm thick CRCA sheet with 50mm x 50mm x 6mm angle iron frame duly painted with two coats of powder coated paint over a coat of red oxide primer on outer surfaces and epoxy paint on inner surfaces, protection class IP-56, grouted on floor. The LT panel board shall be suitable for operating on AC 415 volts, 3 phase, 50Hz, 4 wire system with suitable of PVC copper conductor for internal wiring,thimbles gland, cable lugs, nuts, bolts, washers, etc. including PCC foundation (PCC 1:2:4 type B-1)of suitable size as per panel board 0.5mtr above ground level grouting and bottom portion of enclosure shall be minimum 30cm above ground level of legs of angle ironand supply & comprising of the following including internal pre-wiring complete:- 39 INCOMING(i) MCCB 4 pole 160 Amp 16 KAKA thermal magnetic adjustable type- 01 No. (Incoming) (ii) Voltmeter 0-500 V with selector switch(Digital type) - 01 set. (iii) Ammeter 0-500 Amps with 3 Nos. CT coils and selector switch (Digital type) -01 Set(iv) Indicator lamp neon/ LED type RBY -01 Set of three.v) Aluminium bus bar capacity 250 Amps for Phase-R-Y-B- N - 4 No.OUTGOING:(i) MCCB 3 pole 125 Amp 16 KA thermal magnetic adjustable type -02 No. (Outgoing)(ii) MCCB 3 pole40 Amp 16 KAKA thermal magnetic adjustable type01 No. (Outgoing)(iii) MCB SPN 32 Amps 10 KA - 01 No (Outgoing)(iv) Time switch 250 V single phase of 20 Amp rating - 01 No(v) Complete wiring of the panel board with FRLSH PVC insulated multistrand copper conductor cables of suitable current carrying capacity end terminated with lugs and bolts, nuts and washers of galvanised iron.Note: The rate quoted should include the cost ofexcavation/PCC work as per manufacturers recommendation. 40 Bracket made out of GI tubing 40mm dia, light grade 1.5mtr long including fixing withMS clamps - 2 No made out of 50mm wide, 5mm thick, flat iron with M.S nuts bolts 75 mm long 12mm dia, - 4 No with flat washer (3mm thick) - 02 No including painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete, including 1.5sqmm 3.0 core, flexible Copper cable from juction box to connecter of street light fitting complete all as specified and as directed. . 41 Cable route marker with route indication at every 30m length on cast iron disc of 100mm dia and 5mm thick, marked/written for HT cable 11000 VOLTS embosed including indication direction fixed/bolted to 40mm x 40mm x 6mmthick MS angle iron support of 0.50 m long embedded upto 200mmdepth in concrete block of size 200mmx200mmx500mmcasted in PCC 1:3:6 type C-1 including painting with two coats of synthetic enamel paint over a coat of red oxide primer to exposed steel surface, complete all as specified and as directed. 42 Road crossingby adopting trenchless tunneling work through specilised pipe jacking method by errecting the equipment to true to the alignment and gradient by hydraulic pipe jacking technique complete including tunneling, excavation in any kindof soil including hard rock,inserting DWC HDPE casing pipe in any length, and necessary conveyance charges of machinery and other required materials in co-ordination with the concered authorites all as specified and as directed. Note: Quoted rate is deemed to be inclusive of all necessary tools/plant/machinery and obtaining necessary permissions to carryout the work. 43 Point wiring complete with 1.5 sqmm PVC insulated, FRLSH, conforming to IS-694/1990 unsheathed,multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawn through and including PVCConduit 20mm dia medium grade andincluding cutting, chasing work at any height and all accessories are concealedinwalls / roofs / floors / ceiling etc; metal flush boxes suitable modules as directed with top, bottom, side/back wall knockout for conduitentry from any direction made out of 1.60mm thick, including modular top cover plate as per numbers of switch modules for fixing of modular switches,sockets,fan regulators, red colour indicator, blank plates etc. as approved coloursandincluding 1.5 Sqmm PVC insulated multistranded FRLSHunsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providingputty and white cementfor smooth finishing of existing surfacecomplete all as specified and directedfor the following:- 44 One light/fan/bellpoint controlled by one switch 45 One 3/5 pin socket outlet, 5 Amp on independent board 46 One socket outlet 3 Pin, 5 Amps, on the same board 47 One two way point controlled by one 2 way switch 48 One light point controlled by 2 way switches, 49 Point wiring for power point control by one switch with 2.5 Sqmm nominal area PVC insulated single core multi standard copper conductor FRLSH insulated and undheathed heavy duty cable in colour code including earth wire with cable of size 2.5 sqmm copper conductor flexible FRLSH insulated drawn into and including concealed in PVC conduit of not less than 20mm dia and 1.5mm wall thickness (ISI marked) terminated into annealed steel terminal boxes including modular frame and cover plate for fixing of switches, sockets etc; complete all as specified and as directed. 50 Concealed sub main wiring of two run with 06 sqmm single core PVC insulated, FRLSH,flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit 25mm dia, medium grade, ISI marked and fixed, including cutting /chasing as required and its accessories including one run of 6 Sqmm single core PVC insulated, FRLSH, multi stranded copper conductor cable as earth continuity conductor in green colour, connected to common earth dolly, complete all as specified and as directed.Note:- Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only. 51 Sub main wiring with two run of single core FRLSHPVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm drawing through and includingconcealed rigid non metallic PVC conduit medium grade ISI marked 25mm dia or above required including one single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sqmmas earth continuity conductorconnected to commen earth dolly complete all as specified and directed.Note: - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only. 52 Sub main wiring with four run of single core FRLSHPVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm drawing through and includingconcealed rigid non metallic PVC conduit medium grade ISI marked 25mm dia or above required including two run ofsingle core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sqmmas earth continuity conductorconnected to commen earth and earth dolly complete all as specified and directed.Note: - Four run of 6 sqmm single core copper conductor cable and two run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only. 53 Sheet metal, VTPN distribution board (DB) fitted with DPX3, 160 MCCB, 04 way, (DPX3 -160 +12), complete with metal door, 415 volts rating and IP 56 protection the DB shall be fixed flush to wall and including all internal connection, necessary reducer lugs all as directed by Engr-in-Charge. 54 MCB, Single pole, 240 volt, 40 Amp, 10KA rating,C curve, complete with connection testing and commissioning, complete all specified and directed. 55 Deduction to be made from BOQfor Sch A Part -XIII (Schedule of credit) during AOC.Note: Tenderers shall not quote for this schedule.
Contract Date: May 23, 2026 Contract Value : 4.61 Crore
Statutory Bodies & Commissions/Committees No of Bidders 7
Jammu And Kashmir View Result →
25.
Defence #11117617 AOC
Tender For Provision Of Training Shed And Pt Shed At Varanasi; Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 72 metre x 18 metre x7.95 metre height from FFL to bottom of truss using 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 1.01 to1.13 here-in after shall also be included in lump sum rate quoted against Srl item No 1 of BOQ. 2 Site clearance/site developments 3 Anti termite treatment 4 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 5 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 6 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 7 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 8 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 9 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 10 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 11 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 12 Ramp provided same as per flooring specification 13 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 14 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 15 Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 36 metre x 12 metre x 7.95 metre heightfrom FFL to bottom of trussusing 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 2.01 to2.13 here-in after shall also be included in lump sum rate quoted against Srl item No 2 of BOQ. 16 Site clearance/site developments 17 Anti termite treatment 18 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 19 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 20 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 21 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 22 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 23 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 24 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 25 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 26 Ramp provided same as per flooring specification 27 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 28 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 29 INTERNAL ELECTRIFICATIONM&L for point wiring completeforOne light/Fan/Exhaust Fan/Bell point/ Bldg Security Light / Industrial wall mounting fancontrolled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including suitable cover plate of any module including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i) In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL(iii) Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost. 30 M&L for Point wiring completeforone 5 Pin 5 Amp switch Socket outlet point on an independent board, with PVC insualted and unsheathed FRLSH CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i)In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL 31 M&L forPoint wiring completefor power point controlled by oneswitch with PVC insualted and unsheathed FRLSH cable 2.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof /wall/ floor slab and ceiling, suitable for modular switch with modular metal flush box with inner and outer cover plate & frame etc of requied colour complete, including 2.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.One circuit controlled by max one points only. 32 S&F Switch piano, flush type 5 Amps single pole, one way complete all as specified and directed. 33 S&F Socket outlet, flush type 2 in 1, 5 pin, 6 Amps, multi-purpose complete all as speci-fied and directed. 34 S&F Switch piano, flush type single pole, one way 16 Amps complete all as specified and directed. 35 S&F Socket outlet, flush type 2 in 1, 5 pin, 5 and 16 Amps, multipurpose complete all as specified and directed. 36 S&F ceiling rose two to three terminal, complete all as specified and directed. 37 S&F BLDC type air circular wall mounting fan 750mm Sweep, single phase 230 V AC, 1440 RPM, air delivery CMM, power consumption 250 watt, with string, 3 speed choice colour mate, 5 star rating & ISI marked alongwith complete accessories and connecting up the fan to ceiling rose incl PVC insulated 3 core 23/0.0076 copper cable & suitable size of flexible cord with plug top from ceiling rose to wall mounted fan arrangement on pillar / wall is deemed under quoted item rate, complete all as specified and directed 38 S & FLED wide beam optics High Bay Light 100 Wdaylight 150 lum/Wwith PDC housingsuitable for ceiling (surface/suspended) rated aluminium housing indoor type with all fixing arrangement, complete all as specified and directed. 39 S&F LED Building security light fitting 35 Watt with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (35W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers, complete all as specified and directed. 40 S & F MCB DB vertical type 4-way VTPN sheet metal enclosures 415 V with 200 Amp fully insulatedstandard copper Bushbar for each phase & sourrounded with neutral Bars & two common neutral bar, two earth bar incl cable ties fo cable management suitable for housing MCCB/TPN 415 V as incommer IP-54 protection with metal doors all enclosed on standard steel sheet flush mounted type double door factory fabricated complete without MCB & MCCB but with enclosure blank plate, complete all as specified and directed. 41 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete without MCB and with enclosure blank plates for unused way suitable for 12- way ISI marked, complete all as specified and directed. 42 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete withoutMCB and with enclosure blank plates for unused way suitable for 8- way ISI marked, complete all as specified and directed. 43 S&F MCB SPN 32 Amps B series, 10 KA-240 Volts, AC ISI marked, complete all as specified and directed. 44 S&F MCB single pole 6 to 32 Amp rating C Series,10 KA240 Volts, AC50 Hz , ISI marked, complete all as specified and directed. 45 S&F MCCB 415 Volts AC, with 100 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCBand with enclosure blank plates for unused way suitable for 4 way, complete all as specified and directed. 46 M&L for submain wiring with two single core 4 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit not less than 25 mm dia medium grade ISI marked concealed in wallsurface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly, complete all as specified and directed.Note:- Two single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 47 M&L Earthing complete with galvanised mild steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using GI earth wire 4 mm dia as earth electrode connected to bolts, nuts, check nuts and washers of GI or steel etc at one end and connected to equipment at another end.GI earth wire encased in and including 15 mm dia GI light grade pipe from upper end of earth plate upto equipment 20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, test point, GI funnel with wire mesh fixed on water pipe PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pit chamber and RCC pit cover slab of 50 mm thick precast RCC (1:1.5:3) type A-1 duly reinforced with MS TMT bars 8 mm dia @ 150 mm c/c both ways with 10 mm dia MS round baras in lifting handles, excavation earth work including laying the GI pipe concealed in floor/wall all as described in electric plate no 3 of SSR part I complete all as specified and directed and testing on completion. Note:- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.(ii) Earthing wire beyond 7.5m shall be measured and paid separately. 48 B&R WorkM & L One closed side panel of ACP Sheet with framed Mild steel structure at one side of shed with the raised platform arrangement of size12m x 6m of brick work and Tile/marble flooring for Yoga / PT Shed, complete all as specified and directed. 49 M & L for Design, fabrication ,supply & erection of pre-engineered steel building incl civil works inside shed for One store Room of dimension 5 m x 5 m, complete all as specified and directed. 50 Material and Labour for 08 nos Rope Gallows made up of framed mild steel structure fixed to walls/floors with sliding arrangement which can be slided to one side when not in use with 5 ropes to be hung from each rope gallows including painting with primer, complete all as specified and directed. 51 Material and Labour for 04 nos beam bars made up of framed mild steel structure fixed to walls/ floors to be placed at one side of edge including painting with primer, complete all as specified and directed. 52 Material and Labour for 20 nos chin up bars made up of framed mild steel structure fixed to walls/ floors at 2.4m height fixed at one side of edge of shed including painting with primer, complete all as specified and directed. 53 Supply and fixing MS grill bars all around the shed, complete all as specified and directed. 54 EXTERNAL ELECTRIC SUPPLYSupply,installation and testing of factory made,CPRI Approved cubical outdoor (Kiosk) type feeder pillar box 415 volt, 4 wire, AC 50 Hz, made out of 3.15 mm thick CRCA sheet ,weatherand vermin proof powder coating finish bothside(interior & exterior) for outdoor mounting withhaving degree of protection as per IP-56 complete factory lock two earth terminal suitable cable gland for all incoming and outgoing and removable neutral link,Both Side openable double door Indicating light LED type RYB - 01 Set,Ammeter-01, Voltmeter-01, connecting strip/solid conductor brought out to cable chamber brass/copper nut, bolts/washer etc including grouting of feeder pillar box 60 cm above ground level including suitable size angle iron stand made up of65 x 65 x 6 mm welded on all the four corner embedded in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) upto 30 cm includingexcavation and earth work complete with following asseccories:-(a) copper insulatd busbar high conductivity 400 Amp rated 4 phase including neutral bus bar complete - 01 No.Incoming :-(b) MCCB4 -pole 160 Amp make-L & T,415 Volt,breaking capacity 36 KA,50 HZ with thermal magnetic release - 01 No.Outgoing :-(c)MCCB 4 - pole 125 Ampsbreaking capacity 25 KA, 50 HZ- 02 Nos. (d)MCCB 4 - pole 63 Ampsbreaking capacity 25 KA, 50 HZ- 01 No. 55 M&L for bus bar box of sheet metal 3 mm thick powder coated, having 4 Nos. aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 63 Amp 415 volts with thermal magnetic release as incomer, breaking capacity 25 KA inside the box and suitable fixing arrengement like flat iron clamp of size 25x3mm with hinged cover & locking arrangementincluding grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted oncomplete all as directed by Engineer-in-charge. 56 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 16 sqmmto 35 sqmminsulated armoured aluminium cable complete all as specified and directed. 57 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 50 sqmmto 95 sqmminsulated armoured aluminium cable complete all as specified and directed. 58 Supplying ,laying, commissioning & testing 70 Sq.mm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 59 Supplying ,laying, commissioning & testing 50 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including takingout old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 60 Supplying ,laying, commissioning & testing 35 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cable,complete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 61 Supplying ,laying, commissioning & testing 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 62 Excavation in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth;for laying of cable, foundation, etc, or for shafts, wells, cesspits, manholes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil,complete all as specified & directed. 63 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified & directed. 64 Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point,complete all as specified & directed. 65 M&L sand filling under floors or in foundations including watering and consolidation,complete all as specified & directed.Note :- Punned thickness shall be measured and paid. 66 Supplying & laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 450mm x 230mm x 50mm (Note: cable cover shall be laid perpendicular to the axis of cable). 67 M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6.3mm burried directly in ground (Earth pit not less than 2.25 m deep) with top edge of the plate not less than 1.5 m below ground level connected to GI strip of size 32 x 6 mm by means of nuts, bolts & washers,earth wire protected by GI pipe 50 mm dia ‘light grade’ ISI marked including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate),40 mm thick precast RCC cover in 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe ‘light grade’ ISI marked, 20 mm bore all as shown in Electrical plate No. 03 of MES Schedule Part-1 (2009) complete. 68 M&L GI pipes/tubes 80 mm bore,light gradeincluding necessary GI Fitting i.e. GI bends with socket ,reducer socket laid in trenches fixed on pole fixed on walls UG Road/floor for cable protection complete,complete all as specified & directed. . 69 M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25x4mm galvanised iron strip,complete all as specified & directed. 70 Chain Link FencingExcavation in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum filling in and ramming earth or broken rubble mixed with earth around, complete all speecified and as directed. 71 PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified and directed. 72 Supply and Fixing Mild steel work Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. 73 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. 74 Supply chain link MS fencing galvanised mild steel wires 4mm diameter mesh size not less than 75mm x 75mm etc complete all as as specified and directed.
Contract Date: May 20, 2026 Contract Value : 5.24 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
26.
Tourism #11114098 AOC
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. B) All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 40 Kg / Cm2 (Wire Cut Bricks) In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry Usign Fly Ash Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) With Bricks Of Class Designation 40 Kgs / Cm2. Above Plinth Upto Floor V Level 200 X 95 X 95 , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineerin-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. Moulding As In Cornices, Window Sills Etc. Exceeding 15 Cm In Girth. , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates Cornices & Mouldings , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint. B) In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing & Fixing Upvc Door Frame Yashashri Make Or Equivalent Made Out Of Upvc Extruded Multi Cavity Frame Of 60 Mm X 60Mm X 2Mm Wall Thickness. Frame Is Reinforced With G.I. Channel & Welded In Corners With Average Weight 0.80 Kg Per Running Mtr. These Frames Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing & Fixing 20 Mm Door Shutter Yashashri Make Or Equivalent, Made By Using 20Mm X 155Mm X 1.2Mm Upvc Multi-Cavity Section And Boarder Of 30Mm X 40Mm X 2.5Mm Upvc Multi Cavity Section. The Corners Are Joined By Inserting Polymetric Corners & Hardware Used For Fixing The Door Shutter Is Stainless Steel Hinges & S. S. Handle & S.S. Tower Bolt. The Average Weight Of 20Mm Door Shutter Is 4.60Kg Per Sq Mtr. These Upvc Sections Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete 250 X 16 X 5 Mm , Providing & Fixing Bright Finished Stainless Steel Ss 304 Grade Aldrops With Screws Etc. Complete. 250 X 150Mm. All Works Complete As Per The Drawing, Specification And Direction Of The Engineer-In-Charge-In-Charge , Providing And Fixing Stainless Steel D Type Handles With Necessary Screws Etc Complete A) L 300Mm/325Mm X 22 To 25Mm Dia , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete 125 X 70 X 4.0Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 200 X 10 Mm , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 150 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete A) Dark Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. C) 80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.D) 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In Grey Colour (M35 Grade) , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm A) Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 20 Mm Thick. , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing And Laying Jet Black Mirror Polish Granite Flooring And Dado Over 20Mm Thick Base Of Cement Mortar 1:4 Laid Over And Jointed With Cement Slurry Including Rubbling Complete Granitic Slab (Jet Blck With Mirror Polish) 20 Mm Thick Add Q0% Wastage 1.00 , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Approved Make And Colour With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 150 Mm Strip Between Five Stone For Grassing.Strips To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.( Price Including Stone, Gardening Soil, Fertilizer And Grass Etc. ) , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete. 140 Mm Nominal Size , Extra For Providing Flat Iron Bracket 50 X 3 Mm Size Instead Of 40 X 3 Mm Size With Necessary Bolts Nuts, Washers Etc. For Fixing A.C. Gutters To Purlins. , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters. 140 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Of Flashing Tape Along Wall And Tile Jointes ( Abutment Area ) Including Fixing Of Aluminium Strip Above Flash Including Sealing The Top Edge With Uv Resistant Sealant Etc Complete. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Extra For Plastering Done On Mouldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Mts. Lead. , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Carting Away Unwanted Excavated Material Such As Soil, Lime, Moorum, Building Rubbish, Laterite Stone, Excavated Earth, Ordinary Rock Etc. From Site Lead Of 5 Km Including All Loading & Unloading Charges ( A ) ( By Mechnaical Automative Transport ) Contractor Should Arrange Land For Dispose Up These Material At His Own Cost Lead Upto 5 Km. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. , Supply, Fabrication And Installing In Position Ms Gates Of Required Width And Height Of Including Wicket Gate And Rolling Gate(If Necessary) Of Approved Size Made Of Channels Joists, Angles, Plates, Pipes And Ms Sheets Including Stiffeners, Bracing, Fabricated Hinges, Ms Aldrops Locking Arrangement, Tempered Steel Pivots, Guide Track Of Ms Tee, Ball Bearing Arrangement, Casters Wheels Etc. All Complete As Per Drawing, Specification And As Directed By Engineering In Charge All Complete. The Main Entrance Gate Shall Be Fabricated Out Of Mild Steel Sections Completed With Applying A Priming Coat Of Approved Steel Primer And Two Coats Of Synthetic Enamel Painting. The Structural Steel Works For Gates Shall Include Supply, Fabrication, Transportation, Erection Of Structural Steel Gates Complete With Placing In Position Embedded Parts In Concrete / Brickwork And In Road Surface Including Cutting, Grinding, Drilling Of Holes, Welding And Painting Etc Complete , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge A) 110 Mm Dia , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. Size 900 X 400 X 100 Mm With Steel Reinforcement Not Less Than 5.0 Kgs Per Unit -12 T Capacity , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. A) Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. B) Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. C) Theming Work For Nandi Kalash In Frp As Per Tender Drawing , Construction Of Deepstambh Of Reinforced Cement Concrete Pillar With Exposed Laterite Masonary Of Octagonal Shape (1500Mm Length Of Each Side And Total Height Of 5500Mm) With Openings For Placing Diya Lamps And Foundation Platform Of Size (1800Mm Length Of Each Side And Height Of 1500Mm) Including Molding,Etc. As Per The Detail Drawings And As Directed By Engineer In Charge. , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Rough Dressing The Trenched Ground Including Breaking Clods. , Fine Dressing The Trenched Ground. , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Of Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevatia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Sebestena , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Foxtail Palms , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Callistemon (Bottlebrush Tree) , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Mimusops Elengi , Plumbing Works , Proving And Fixing White Vitreous China Wall Hung Type (European Type) Water Closet With Seat And Lid With C.I. Brass Hinges And Rubber Fittings With Flush Valve Nelson/ Similar Fully Chromium Plated With Stop Cock, Wall Flanges, Flush Pipe Or Elbow And Vaccum Breaker Coupling Etc. Including Chair Bracket/Rag Bolts, Cutting & Making Good The Walls And Floors Where Required And Concealed Seat Support - W.C. Pan With White Plastic Seat And Lid , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Large Lipped Front Urinal Basin Of 590X375x390mm Size With Urinal Valve Auto Closing System With Built In Control Cock & Wall Flange With Fittings, Spreader, R.S. Or C.I. Brackets, Standard Size C.P. Brassl Flush Pipe And Spreaders With C. P. Brass Unions & C. P. Brass Clamps With Waste Fitting As Per Is 2556, Pvc Trap With Outlet Grating And Other Couplings In Cp Brass Complete, Including Painting, Fittings, Cutting And Making Good The Walls And Floors Where Required. - Range Of One Urinal Basin , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75 Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 90 X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455 X610mm Internal Dimensions Total Weight Of Cover Ad Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg. ) , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:. 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 32Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Non-Return Valve Of Approved Quality : 40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality Low Pressure With Copper Floats 25 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 20 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 25Mm Outer Dia. , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc25 Mm , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete 150 Mm , Conveying Carefully From Stack At Site, 250M From Both Sides Rolling And Lowering Into Trenches, Laying And Jointing True To Line And Level, Reinforced Cement Concrete Spun Pressure And Non Pressure Pipes Of Various Classes, Specials Including Collar And Perfect Linking Of Joint With Jack To Correct Position Including Cost Of Jointing Material In Cement Mortar 1:2, Necessary Hydraulic Testing, Curing Of Cement Mortar Etc. Complete. 150 Mm , Providing And Fixing Angular Stop Cock With Wall Flangue - Jaquar Make. Florentine (Flr-5053N) 15Mm Of Approved Quality. , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996 1000 Lit. Capacity , Supply Of Inferential, Dry Dial, Type Domestic Water Meter,Suitable For Horizontal Installation, Duly, Sealed Against Tampering With Couplings At Both Ends Having Pulse Output Facility Compatable For Automatic Reading System ,Conforming To Is:779-1974 And Iso 4064-2005 Standards And Bearing Eec/Mid/Oiml Mark, (With Latest Amendments)Along With Test Certificate From Fcri/Nabl As Desired By The Department.25 Mm , Fixing Water Meter & Stop Cock In G. I. Pipe Line Including Cutting & Treading The Pipe And Making Long Screw Etc. Complete (Cost Of Water Meter And Stop Cock To Be Paid Separately) , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality : 15 Mm Nominal Bore , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 60 To 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of Architectural Designed Pole Of 3Mtr Height Post Top Pole Made Of Galvanised Iron Sections Of 114Mm & 60Mm Dia. This Architecturally Designed Pole Is Structurally Sound. Windspeed Considered Should Be As Per Is875:Part 3:1987 ,Material For Tubes Steel Of Grade Yst210.,Material For Base Plate Steel Of Grade E250 To Is2062; 2011. The Pole Will Be Provided With An Inbuilt Junction Box To Fix 16-32Amp Connectors & 6-16Amp Mcb Inside The Cut Window Of The Bottom Pipe The Inbuilt Box Should Have A Flush Door Of Suitable Size With Allenkey Locking On Bothside. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 200X200mm Having 10Mm Thickness. The Base Plate Shall Have 4 Hole Suitable For M16/450 Foundation Bolts . The Galvanized Zinc Coat Should Not Be Less Than 65+/ 10Microns. The Galvanised Pole Should Be Painted In 3Layer Coating (Coating Thickness Should Not Be Than 80Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint With Overall 100 +/- 10 Microns. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of 40-50W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40-45W Led. Fitting Shall Be Post Top Mounting Type Fixture. System Wattage: 40-45W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply, Led Lumens:6000Lm, Cri(Ra):80, Led Colour Temperature: 4000K, Life Span:60,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv . Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Pf=0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -5 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (A) 5 To 20 A , Supply Of 3 Kva 3 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board Consumer Unit 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Hinged Front Acrylic Cover For The Mcb Knobs Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (B) 2 + 8 Way Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. B) Dp, Cat A , Supplying And Fixing Following Rating Double Pole (Single Pole And Neutral) 240 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying & Erecting Of Led 12W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A
Contract Date: Jul 02, 2026 Contract Value : 3.70 Crore
Government Departments No of Bidders 2
27.
Communications and Information Technology  #11104520 AOC
Tender For supply installation testing and commissioning Of It Infrastructural Items, Cctv Surveillance System, Epabx And Voice N/W, Audio Visual Solution For The Conference And Training Room At Igr Office, In The Stp-Ii.- 1 Description 2 SITC of IP 4MP IR Bullet Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 3 SITC of IP 4MP IR Dome Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264 /MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site).Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 4 SITC of 16 Channel IP 4K NVR having minimum technical specification: Video Input: 32 Channel IP Fully Featured NVR; Audio Iuput/Output: 1 Channel Input/2 Channel Outputs, RCA; Display Interface: 2 HDMI (1 HDMI up to 3840 × 2160); 2 VGA; Display Split: 1/4/8/9/16/25/36/64; OSD: Camera title; Time; Video loss; Camera lock; Motion detection; Recording; Compression: H.265/H.264/MJPEG/MPEG4; Resolution: 12 MP (4000 × 3000); 8 MP (3840 × 2160); 6 MP (3072 × 2048); 5 MP (2560 × 1920); 4 MP (2560 × 1440); 3 MP (2048 × 1520); 1080p (1920 × 1080); 720p (1280 × 720); D1 (704 × 576 / 704 × 480); CIF (352 × 288 / 352 × 240); Frame Rate: 1–15 fps (12 MP and 8 MP); 1–25/30 fps (rest of the resolutions); Record Bit Rate: 256Mbps or 200Mbps(when RAID is enabled); Bit Rate: 16 kbps ~ 20 Mbps, per channel; Network Throughput: Input 256Mbps or 200Mbps (when RAID is enabled); Output 256Mbps or 200Mbps (when RAID is enabled); Cascading: Built-in CMS to Monitor and Manage Multiple Matrix NVRs; ONVIF and Major Camera Brands Support; Usb Port: 4; RS232: 1 port (for PC communications and keyboard). Temperature: -10 ºC ~ +55 ºC; REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Wireless Bluetooth Multi Device Keyboard and Mouse. Centralised VMS perpetual license.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 5 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D- LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 350cd/m^2 or nits or higher, Contrast Ratio (Static): 1100:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 6 SITC of Hard Disk .Spec Surveillance Grade HDD of minimum 7200 rpm for storage 8TB storage capacity.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 7 SITC of: Business Communication System with all necessary power accessories: EPBAX system with line: 4 Trunk, 8 Digital & 48 Line Analog Extensions, Expendable up to 96 Analog Extensions with all necessary power accessories; Other Faetures: Hotline, Live Call Supervision, Auto Call Back, Automatic Call, Disconnector, Auto Redial,Call Splitting, Call Conference, Direct Inward Dialing, External Call Forwarding, Executive/ Secretary etc. 8 SITC of Digital Telephone Set 9 SITC of Analog CLI Telephone Set. 10 SITC of: 5 pair Un-armoured Telephone Cable {0.5mm.Dia (Minimum)} 11 SITC of: 200 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete WITH ALL ACCESSORIES. 12 SITC & Laying of PVC conduits(ISI marked) laying through surface with all accessories as required FOR THE ENTIRE SYSTEM WITH ALL OEM ACCESSORIES. (Quality: MMS; Ø=25mm) Quality : ISI, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 13 SITC of ceiling speaker 2 Way, Acoustic Suspension ceiling mount speakers with superior sound quality. Components: LF: 8cone driver; HF: 1 soft dome; Frequency range (-10dB): 55Hz - 20kHz; Nominal coverage: H x V: 100° conical; Power rating: 180W PGM; Transformer taps: 60W, 30W, 15W @ 100V; Sensitivity (1W; 1m on axis): 90dB SPL; Peak: 116dB SPL; Certificate: CE, RoHS; Color- White. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 14 SITC of Multichannel Power Amplifier Output power : 1kHz (THD +N=1%: 4Ω/8Ω) 140W x 4 , Frequency response : 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) , S/N ratio : ≥ 100dB(A-weighted) , Crosstalk : ≤ -60dB. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 15 SITC of column array speaker Full-range, Bass reflex type slim line array/ column array speaker with 8 x 1.5” Cone; Frequency range (- 10dB): 81 Hz – 20 kHz; Nominal coverage: H x V: 170° x 25° - 30°; Power rating: 160 W PGM; Sensitivity (1W; 1m on axis): 91 dB SPL; Peak: 116 dB SPL. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 16 SITC of Multichannel Power Amplifier Output power 1kHz Non-clip 20msec Burst Both channels driven 300W x 2 @ 8Ω & 2Ω and 500W @ 4Ω; Sampling frequency rate: 48kHz; A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling; THD: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power); Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz); Input impedance: 20kΩ (Balance), 10kΩ (Unbalance); I/O Connectors: Speaker output: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4 PHONE(TS) x2; Line Input: XLR-3-31 x2, 1/4 PHONE(TRS) x2; Inbuilt Load protection, Amplifier protection & Power supply protection. 17 SITC of Digital Signal Processor Sampling frequency rate Internal 48kHz/44.1kHz ; Signal delay : 1.9 msec (AD-DA @48kHz), Total harmonic distortion : “0.05% (+4dBu, Gain:-6dB, 48kHz) 0.1% (+4dBu, Gain: +66dB, 48kHz)” (Measured with a 18dB/Oct filter @80kHz) ; YDIF In YDIF RS-422 16IN RJ45 , YDIF Out YDIF RS-422 16OUT RJ45 ; GPI 16IN / 8OUT IN 0V-5V,(IN 16 L(0V-2.5V)/H(2.5V-24V)), Output channel functions : Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter, AEC. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 18 SITC of Digital Control panel 1 Volume & 4 Switch equipped Wall Mounut Control panel for DSP ; Easy connection by CAT5 carrying RS485 + power.Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 19 SITC of Ceiling Microphone Frequency response: 160Hz – 16kHz(- 10dB) or better; Sampling Rate: 48kHz; Bit depth: 24bit; Latency: 60 [ms] (including signal processing) or lower; Audio I/O Dante: 1in x 2out, In1=AEC reference signal/Out1=output of beam mix, Out2= output of beam mix (simple processed); Maximum input level of SPL: 117.8 dB SPL; Self Noise: -0.8 dBA SPL; SNR(Ref. 94 dB SPL at 1 kHz): 94.8 dBA; Sensitivity: -23.8 dBFS/Pa; Dynamic Range: 118.6 dBA; Signal Processing: Multi beam tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain; Power requirements: PoE(IEEE 802.3af), DC 48V; Indicator: Front Indicator(Mute/Unmute & Status) ・Network Port Indicator. (Ceiling Mic & DSP Should be from Same OEM) . Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 20 SITC of L2 Switch for stable operation of a Dante network with Standard IEEE 802.3 (10BASE-T/100BASE-TX/1000BASE-T); Number of ports: 10 Ports; Communication mode: Auto negotiation; Connector type: RJ-45; LAN ports: IEEE 802.3 (1000BASE-T) 2 ports; 8 ports (1-8) PoE Power Supply; PoE Standards: IEEE 802.3at; Max power supply per port: 30 W. 21 SITC of FHD 20x PTZ camera 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be CE, FCC, RoHS & BIS Certified. Warranty: 03 (Three) onsite comprehensive OEM warranty with parts and service. 22 SITC of 86 UHD LED Interactive Display 86, 4K Multi touch interactive display, 450 cd/m2 Panel Technology- IPS, ,Android Pie 11.0, 8 GB Memory, 128 GB storage, Built in Wifi & Bluetooth, 2x20 W - Front Facing Speakers, Continuous Touch Points: 40 Points: Windows,10 Points: Android. Rear port terminals: 4 x HDMI IN, 1 x VGA, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x Micro SD, 1 x secure slot (USB 2.0), 1 x OPS slot (15W), 1 x HDMI Out, 1 x RJ45. Front Port Terminals: 2 x USB2.0 Type-A, 1 x USB2.0 Type-B for touch, 1 x HDMI2.0 Input, Capability to connect & disconnect all devices / group of devices from central location. Application have capability to share and finish casting of BYOD device and have a robust authorization management. Power off & Reboot devices from central location also control external devices such as USB cameras, Speakers, control brightness & clear cache. Device active trend and deactive displays, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, 24x7 operation, with OPS i5, 8GB RAM, 256GB SSD. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 23 SITC of 32 HD Display 32 FHD Ready resolution Android LED display Brightness-500 Nits, Operating Hours- 24x7,with built in 2.4 Ghz Wifi, 1 Ghz Built in Quad core processor, 1.5 GB DDR3 RAM, 8 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, , 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1. 24 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 25 SITC of Wireless Presenter Operating system Windows 10 and higher macOS 11 (BigSur) and higher Android v9 and higher; Video outputs 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-C DisplayPort 1.2 (only Gen2); USB: 1 X USB-A, 1 X USB-C ClickShare Buttons 2, Desktop & Mobile Native protocols: Airplay, Google Cast, Miracast* Maximum number of simultaneous connections (with Buttons and/or App): 32; Noise Level: Max. 25dBA @ 0-30°C Max. 30dBA @ 30-40°C Authentication protocol WPA2-PSK in stand alone mode WPA2-PSK or IEEE 802.1X, Wireless transmission protocol IEEE 802.11 a/g/n/ac and IEEE 802.15.1; Reach: Adjustable with signal strength modulation; max. 30m (100 ft),Frequency band: 2.4 GHZ and 5 GHz. including 2 additional buttons. 26 SITC of 1.5 sq mm Speaker Wire: 27 SITC of CAT6 Cable: 28 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 29 SITC of AUDIO Cable 30 SITC of 10 mtr USB Cable 31 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 32 SITC of Connectors & Interconnects 33 Mics - installation accessories 34 SITC of Digital Podium with 20 or bigger touch display & gooseneck microphone All-in-one Podium with Podium body made from 1.5mm thick CRCA steel, duly powder coated, with security lock cover for Touch display max size 24 Diagonal. With Keyboard tray housing, Mouse, Drawer for doc cam, space for keeping extra laptop/tablet, Gooseneck mic with switch, W/o Central Controller, 360 degree heavy duty movable castor, Open from Front & Back for easy installation, Adjustable Rack, Ample ventilation.Multimedia Controller with Control out put, Multiple input & switchable output. Warranty: 01 (ONE) years onsite comprehensive OEM warranty with parts and service. 35 SITC of Wall Speaker SITC of Wall Mount Speaker with all necessary accessories, having minimum technical specification: System Type: Full range, Acoustic suspension; Components: 3.5 full range; Frequency Range (-10dB): 130Hz-20kHz; Coverage Angle (Horizontal x Vertical): 150° x 160°; Nominal Impedance: 8Ω; Power Rating: 40W; Sensitivity (1W, 1m): 86dB SPL; Maximum SPL (Caluculated, 1m): 105dB SPL; Connectors: 1x Euroblock (4P) (Input: +/-, Loop Thru:+/-); Material, Finish, Color: Black, White; Accessories: Owners Manual, Retaining knob, Terminal cover screw, Wall / Ceiling mount bracket, Terminal cover. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 36 SITC of Mixer Amplifier Output Power : 120W x 2 (20ms Burst) ; Total harmonic distortion : ≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W) ; Crosstalk : ≤ -70dB (MIC/LINE input to other MIC/LINE input) ; Mic/Line Input : Input 1-6: 3.5mm Euroblock (6-pin, balanced) x 3. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 37 SITC of 65 4K display: 65 4K UHD (3840x2160 Ready resolution , Brightness-350 Nits, Operating Hours- 24x7,Built in Android OS LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , Haze-28%, RS232CX1. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 38 SITC of 43 4K UHD (3840x2160) Display Supply, Installation, Testing and Commissioning of 43 4K UHD (3840x2160) Ready resolution Built in Android OS LED display with brightness- 500 Nits, Operating Hours 24x7, built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1, Haze-28%. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 39 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 40 SITC of Wireless Lapel Mic: 24 MHz bandwidth 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal-to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 41 SITC of Wireless Handheld Mic 24 MHz bandwidth: 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 42 SITC of Small format PC for Podium with dual HDMI output: 43 SITC of Ceiling/Wall Brackets for Displays 44 SITC of 1.5 sq mm Speaker Cable: 45 SITC of CAT6 Cable: 46 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 47 SITC of AUDIO Cable 48 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 49 SITC of Connectors & Interconnects
Contract Date: May 17, 2026 Contract Value : 57.09 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
28.
Defence #11104420 AOC
Tender For Repairs / Re-Novation Of Ofti And Ofti Work Shop Buildings Inside Factory Area At Ofmk.; 1 Site clearence 2 FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site 3 GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 mm and not exceeding 150 mm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site. 4 Demolition of cement concrete of any description and in any position not otherwise specifically provided for.Complete all as specified directed. 5 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. Complete all as specified directed. 6 Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified directed. 7 Dismantling floor,heartor wall tiling including cement mortar bedding but nor baking removing serviceable tiles to stores and rubbish off the premises.Complete all as specified directed and directed. 8 Taking down : Taking downcement or cement lime plaster, any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. 9 Removing building materials etc.other than spoilupto a distance of 1.0 Km, including loading, unloading and stacking at the destination. 10 Brick work with sub class ‘B’ bricks straight or curved in plan with 1:6 cement mortar.Complete all as specified and directed. 11 Stone Masonry : Walling of Squared Rubble regular coursed Stonemasonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed. 12 Damp proof course to horizontal or vertical surfaces In cement concrete 1:2:4, type B-0, 40 mm thickincluding necessary formwork . 13 Flush Pointing with 1:4 cement mortar to square rubble, coursed, well bonded and solidly hearted built in cement mortar as directed. 14 Vitrified tiles : Supply and laying of Light shade vitrified tiles 10 mm thick (Square/Rectangle) polished , area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Floor tile finishglossy/mat/ antiskid will be as decided by EIC. Complete all as specified and directed . Make : Johnson, Orient bell, AGL as approved by EIC. 15 GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed. 16 FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell 17 SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed. 18 Plastering : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed. 19 Rounding to edges of stone slabs / granite one edge,such as in steps, cooking platform, and other similar situations. Complete all as specified and directed. 20 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc. complete as directed by EIC. 21 Taking down wooden wall panelling of any description and similar work as directed. 22 Snap grid : Supply and fixing of 605x605 mm snap gridGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediatechannel with connecting clips across the intermediatechannel at 457 mm centre to centre. Complete all as specifiedand directed, Make : Armstrong 23 Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 24 POP ceiling : Providing 10 mm thick plaster of Paris(gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mmwith 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately). Complete all as specifiedand directed, Make : Armstrong 25 Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate boardof siliceous and calcareous material reinforced with cellulose fibre / PVC laminated gypsum tiles with MPL film on rear side, 8 mm thk.for fixing in 600 mm x 600mm grid,Make: Gyproc/ La gyp 26 Door shutter repair : Taking down door shutter of any description exc. 1 sqm and not exc. 2 sqmand repairing and adjusting to the required size including fixing builders hard ware and refixing to the same opening. complete all as specified and directed. 27 Dismantlingof structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed. 28 UPVC window / Ventelator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete all as specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, 29 UPVC window : Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drillingof holes for fixing hardwares and drainage of wateretc. After fixing frame the gap between frame andadjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified anddirected by Engineer-in-Charge. 30 UPVC door : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proofS.S. wire mesh (Two nos. glazed & one no. wire meshpanels) made of (big series) frame 116 x 45 mm & sash46 x 82 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazingbead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVCchambered frame, with in-built roller track and sashextruded profiles duly reinforced with 1.60 + 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionuPVC extruded glazing beads, uPVC extrudedinterlock and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extremepanels along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zincalloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, including drilling ofholes for fixing hardwares and drainage of water etc.After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof siliconsealent over backer rod of required size and ofapproved quality, complete all as specified anddirectd. 31 steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed 32 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 33 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.8 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 34 Wooden Wall panelling : S & F of Prelaminated particle board18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. Complete as specified and directed at site. 35 Wooden panelling frame work : S&F of battens frame work using wooden clean sawn 2nd class soft wood battens of cross sectional area exc. 15 & not exc. 25 sq.cm at a spacing of 35 centres. Complete as specified and directed at site. 36 PCC paving : PCC 1:4:8 in floors/ pavingoftype D-2, 1:4:8 with 40mm graded aggregate,100 mm thick.Complete all as specified and directed. 37 Earth work in excavation in all kind of soils by mechanical means (Hydraulic excavator) means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge 38 Soling (or sub base) of spread thickness 150 mm with broken boulders or quarried stone, inter sticesfilled, surface formed and rolled and consolidated torequired gradient and camber. Complete all as specified and directed. 39 Hard core with broken stone/boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed. 40 Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed 41 Stone sett flooring (M&L) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 42 Edge stones to flooring (M&L) with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep and and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 43 PCC paving : PCC 1:2:4 in floors/ pavingoftype B-2, with 40mm graded aggregate, 100 mm thick. Including finishing concrete surface even and smooth surface without using extra cement.Complete all as specified and directed. 44 Wearproof topping 20 mm thick using CC 1:2:4, as specified incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner). Complete all as specified and directed. 45 Supply of metalic floor hardener 46 Surface excavation not exceeding 30 cm deepand averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed 47 PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. oftype B-1, 1:2:4 (20 mm graded aggregate) 48 Smoth finish : Finishing cement concrete surface even and smooth using extra cement. 49 CC Paver blocks : S&F of Machine pressed precastconcrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement & pigment (Coloured)Complete all as specified and directed. 50 CC chequered tiles :S&F of cement concrete chequered tiles with grey pigment cement and pigments(Coloured tiles) for pavements. size of tile 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.Complete all as specified and directed. 51 PCC paving : PCC 1:3:6 in floors/ pavingof type C-2, with 40mm graded aggregate, 100 mm thick.Complete all as specified and directed. 52 Forming 12mm thick Expansion joints for 100 thick slabsfilled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A. ’ Complete all as specified and directed. 53 Structural steel (S&F) : Structural steel work confirming to Fe-410 W (Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including application of one coat of Zinc chromate primer paint .Make:TATA, Jindal 54 Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed. 55 Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed. 56 Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI basedcorrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed. 57 Supply only of liquid water proofing compound for incorporating concrete.Make. Fosrac, BASF, SIKA 58 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating. complete as specified and directed. 59 Kerb stone : Providing precast cement concrete using Type-B1, 1:2:4 20 mm graded aggregatein window or doorcills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets,etc. with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4. Complete with joints to match . Complete all as specified and directed. 60 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in roofkerbs or mud stops, rounded orchamfered on edges.complete as specified and directed. 61 PCC : Plain Cement Concrete (1:2:4) Type B2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed . 62 RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed. 63 REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. . 64 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 65 SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade A, including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 66 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 150 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 67 SWG PIPE : Supply & fixing of 150 mm dia Salt Glazed Stoneware drain pipeslaid in trenches including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 68 Earth work in excavation of all kind of soils by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Complete all as specified and directed . 69 Returning, filling in of excavated soils, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. 70 PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 71 PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 72 Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit iring, etc., and making good, cutting not exc 10 cm girth. Complete all as specified and directed. 73 Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces. Complete all as specified and directed. 74 S & F ofG.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 75 S & F ofG.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 76 S & F ofG.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches. 77 Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex 78 BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed. 79 NAHANI TRAPS : Supply & Fixing ofCI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4complete all as specified and directed at site. 80 GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified. 81 GRATING : Supply and fixing of grating doom 100 mm dia. of PTMT (min. weight 25 gms) 82 PVC D/E PIPE CONNECTION :Supply and fixing of PVC Double End Pipe connection.in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed. 83 ALUMINIUMPARTITIONS : Supply and fixing complete of anodised aluminium powder coated frames for partition frames and windows etc. all complete as directed by E.I.C. 84 ALUMINIUM WINDOW SHUTTERS : Supply and fixing complete of anodised aluminiumwindow and ventilator shutters powder coated fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary jointig cleats, glazing clips, rubber neoprane packing, handles 2 nos. in each door, hinges, anodised aluminiumsnap beading, screws etc. complete all as directed by E.I.C. 85 HINGES : Supply and fixing of extruded Al. alloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-21 of size 125mmincluding all as specified and directed . 86 Antique aldrop : Supply and fixing of 200 mm long Antique model Brass mixed heavy alloy, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.All as specified and directed and as approved by EIC. 87 Brass hinge: Supply and fixing of extruded brassalloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-11 of size 125mmincluding.All as specified and directed and as approved by EIC.. 88 Antique tower bolt : Supply and fixing of Antique model Brass mixed heavy alloy, barrel tower bolts of extruded section of size 200 mm and fixed all as directed.All as specified and directed and as approved by EIC. 89 Antique Door handle : Supply & fixing of Extruded Antique model Brass mixed heavy alloy, cast type polished bright handles 150 mm long, Complete all as specified and directed 90 TOWER BOLT : Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm and fixed all as directed. 91 BOW HANDLE: Supply & fixing of Extruded aluminium alloy handles 150 mm long, fabricated type, anodised. Complete all as specified and directed 92 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be easured separately), removing materials to store for keeping in safe custody for reuse at site and making good. 93 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) 94 point wiring:S&F / Drawing of cables in PVC pipe,OneLight point or onefan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FR PVC single core sheathed cable 95 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 5 amps independent, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 96 point wiring: S&F /Drawing of cables to One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 97 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 15 amps independent, with cables 4.0 sq.mm size of copper conductor cables FR PVC sheathed. 98 S & F of ceiling rose,3 phase/PVC/Polycorbonate, Isolate body 99 S & F ofswitch modular type of one module, 6 amps 100 S & F ofsocket, 2/3 pin combined, 6 amps, 2 Module 101 S & F ofswitch modular type of one module, 16 amps 102 S & F ofsocket, 2/3 pin combined, 16 amps, 2 Module 103 S & F ofFan step regulator 120 W, 2 Module 104 LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix 105 S & F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. 106 S & F of LED tube lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 107 LED Street Light :Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/Halonix.complete all as specified and directed 108 Exhaust Fan: Supplyand Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding ofsweep 250mm.complete all as specified and directed. 109 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 110 Industrial socket plug: Supply and fixing of 240 V, 20 amps, single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB. 111 MCB :Supply and fixing of MCB / Isolator, 240 V, single pole 40 amp 112 MCB :Supply and fixing of MCB / Isolator, 240 V, double pole 40 amp 113 MCB D.B : S & F of Sheet Metal enclousers for D.B ofsingle doorof SPN,8 way with 200A rated bus bar,240V 114 MCCB: Suppply and fixing of MCCB 3 pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA. 115 S & F of Modular metal flush box 6 module 116 S & F of Modular white cover plate with frame 3 module 117 S & F of Modular white cover plate with frame 4 module 118 S & F of Modular white cover plate with frame 6 module 119 S & F of Modular white cover plate with frame 8 module 120 EARTHING : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and directed 121 Earth continuity conductor : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip. complete all as specified and directed 122 Dismantlng ofAsbestos cement (corrugated,semi corrugated, etc.) sheets in roofcoverings. Sheets shall be deposited to stores as directed. 123 Cutting or uprooting grass on old CC/brick tiles or on old mud phuska,and Taking down old Taf felt and loose material from the roof, cleaning the bitumen surface by wire brushing, washing down & disposing the pealed off tar felt muck etc. for complete as directed. removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. Complete as specified and directed. 124 Surface painting : Removal of old tarfelt sheets,Wire brushing and cleaning top surface of roof tops and surface painting, with a layer of bitumen primer for bitumen membrane @ 0.50 ltr/sqm by the same membrane manufacturere of density at 25° C, 0.87-0.89 Kg/ltr and viscosity 70-160 cps and then left the surface 4 to 8 hours for drying.Complete as specified and directed. 125 Bitumen Tack coat / Seal coat : Applying surface bitumen coat Seal / Tack coatwith lndustrial bitumen 85/25 forwaterproofingtreatments at the rate of 1.2 kg / sqm . 126 Water proofing treatment (M&L) : Rendering water proofing treatment to RCC roof slabs including vertical surfaces with APP based polymetric membrane sheet, minimum 3 kg/sqm and minimum 3.0 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) evenly laid on primed surfaces by forced applicationby torch on treatment. The vital physical and chemical parameters of the membrane shall be : Tensile strength in longitudinal and transverse direction at 23° C as 650/450/5 cm.Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150° C. Cold flexibility shall be up to 2° c when tested in accordance with ASTM, D-5147. The laying of membrane shall be done through the authorised applicator of the manufacturer of membrane. Membrane make : STP / Dr. Fixt / IWL as approved by EIC. 127 Carrying and disposal of debris : Removing building materials etc. to a distance of 1.5 KM or under including loading, unloading and stacking at the destination. Complete all as specified and directed at site. 128 Rolling shutter : S&F ofSteel rolling shutters 1.25 mm thickness of lathe, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle. Complete all as specified and directed. 129 Rough excavation notexceeding1.5 m deepin drains etc in loose/soft soils andgetting out 130 Scarifying : Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc.400 sqm and the thickness Exc 50 mm and n.exc 100 mm deep 131 Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 132 Macadam : Premix bituminous, macadam with paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less).Complete all as specified and directed. 133 Pot holes : Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadamusing paving bitumen, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings,6.3 mmsizeand again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.Complete all as specified and directed. 134 Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 135 Applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5kg per 10 sq metre. Complete as specifiedand directed. 136 Bituminous premixed carpet, 2.5 cm consolidated thickness, with 0.34 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen)per 10 sq.m and mixed in mechanical hot mix plant and laid with mechanical paver and rolled using power roller 8-10 T capacity and compacted to required camber and gradient to uniform smooth surface. Complete as specifiedand directed. 137 Supply and fixing of Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete. 138 Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint and application of priming paint plaster coat. 139 Rendering synthetic enamel painting on new Steel surfacesof any description over 10 cm width or girth- TWO coats including one coat of red oxide Zinc chrome paint. Make: Asian paints/Berger 140 Complete removal existing treatment of of white washing onsurfaces of walls/ concrete. 141 Complete removal existing treatment of of white washing on surfaces of ceilings. 142 CHALK WHITENING : M&L - Chalk whitening (white cement-based, water-resistant, white wall putty) of plastered surfaces as preparatory to distempering on wall surfaces, Make : Birla wall care, complete all as specified & directed. 143 PRIMER : Priming plastered and other surfaces with alkali resistant priming paint. Make : Asion/Dulux- all as specified and directed . 144 WHITEWASH ON CEILINGS : M&L - White washing on ceilings- on old decorated surfaces- including preparation of surfaces – ONE coat of White Wash-complete all as directed. 145 WHITEWASH ON WALLS : M&L - White washing on Walls – on old decorated surfaces- including preparation of surfaces - TWO coats of White wash - complete all as directed. 146 PLASTIC EMULSION PAINT:Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint-complete all as directed. Make: Asian -Apcolite / Dulux-promise. 147 OBD : M&L - Rendering Oil Bound Distempering on old surfaces -including preparation of surfaces on walls - TWO Coats of OBD - complete all as directed. Make : Asian-tractor Uno / Berger-Butterfly / Indigo-gold. 148 External weather proof painting on walls : Material & Labour for applying Two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces. all as specified and directed, Brand : Asian apex,Berger weather shield, Nerolac Rain coat. 149 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting onOld painted Steel surfaces- surfaces of any description over 10 cm width or girth including preparation of surfaces-TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 150 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on Old painted Steel surfaces- surfaces of any description n.exc 10 cm width or girth including preparation of surfaces- TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 151 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on wooden surfaces - old surfaces of any description over 10 cm width or girth including preparation of surface - TWOCoats- all as specified and directed-Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 152 FRENCH POLISHING : French polishing on old surfaces of any description, width or girth –including cleaning and preparing the surface- One or more coats. all as specified and directed. Make : Sheenlac, sealer 153 Supply and fixing of Safety lever locks mild steel with 4 levers for rolling shutters as directed. 154 Fan Hook: Supply and Fixing of Fan hook with double anchor bolt complete fixing as per instructions of EIC. 155 IWC : IWC of approved make fixed with P trap Make: Hindware/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 156 CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware(Prime)/ Cera(Fountain). Complete all as specified and directed. 157 MIRROR : Mirror 5 mm thk. with bevelled edge fixed with concealed screws Make: Saint Gobain/ Nilkamal/ Casa Gold. Complete all as specified and directed. 158 Switch board box with frame plate and cover plate , metal flush box18 module: Supply and Fixing of covering plates with Metal Flush box andcover plate frames of 18 module of make Legrand/ Schneider/ Havellscomplete all as specified by the EIC 159 Concertina coil & 6 straight RBT strands : Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina cross type fencing, GI steel plate & GI core wireon wall top using concertina coils stretched to approx.6 meters length at site and clipped with three nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as C clips, R.B.T clips etc.). Including additional three horizontal R.B.T strands to be fixed with vertical portion of MS angle supports as directed in site. Complete all as specified and directed at site. 160 Accoustic sheets : supply and fixing of choice colourPolyester Fiber Acoustic Board / tiles, Thickness: 12mm, for insula-tion and accoustic purposes, 60x60 cm in size, fixed to wall / ceiling surfaces on snap grid orwith nails to timber frame work or with Z bar/clips etc as specified by manufacturer.Complete all as specified and directed. 161 Floor mat: supply and fixing of choice colourNylon carpet for floors minimum 6 mm thicknesshaving better accoustic co-efficient ,fixed to floor with approved adhesiveas specified by manufacturer.Complete all as specified and directed. 162 ACP wall lining : Supply and fixing of decorative choice colour solid finished Aluminum composit panel 4.0 mm thick sheeting on external wall surfaces upto 12.0 mter heights fixed over aluminium/MS framed wall surfaces as specified by manufacturer. Cost includes ACP panel, frame work, jointing glue and scafolding etc. Complete all as specified and directed. 163 UPVC window (Single glazed panel shutter & fixed wire mesh panel): Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)frame 47 x 50 mm & sash 47 x 68 mm both havingwall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area ofwindow upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel sectionmade from roll forming process of required length(shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension,EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixingframe to finished wall, plastic packers, plastic capsand necessary stainless steel screws etc. Including SS wire mesh panel with aluminium beeding fixed to outer face window using adjustable /removable clips. Profile offrame & sash shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be alsofusion welded including drilling of holes for fixinghardwares and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof siliconsealant over backer rod of required size and ofapproved quality, complete all as specified anddirected by Engineer-in-Charge. 164 WALL TILES : Supply & fixing of Coloured digital glazed ceramic tiles in vertical surface 300x600 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell. 165 PVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 11100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed. 166 PVC door shutter : S & F of Factory Made Solid WPVCDoor Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour. 167 Staircase railing : Supply and fixing of designed Stainless steel hand railing not less than 0.8 mtr height for stairs, balconies etc. using SS grade 304/316 members for balusters & rails etc. and covered with 12 mm thick tampered toughned glass. Design & model shall be as decided by EIC. Cost inclusive of glass, design and other mountings. Complete all as specified and directed. 168 Handicap grab bar : S&F of stainless steel anti slip vertical swing handicap bath room grab bar/rail with paper holder of min. 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 169 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 170 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 0.45 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 171 Wood Door : Supply and fixing of modern & designer soildTeakwood door shutters for Main Doors 32 mm finished thickness as decided by EIC . 172 EWC : Supply and fixing ofItalian Collection ceramic Floor Mount Western Commode, Rim less, One-piece for Bathrooms with Syphonic vortex Flushing system and soft closing seat cover including connection pipe.Make : Jaquar Fusion, Hindware Fabio, Cera cinova 173 WASH BASIN : Supply and fixing of Under counter Wash basin rectangle of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make : Jaquar(Continental)/ Cera(campa)/ Parryware(Aqiline). Complete all as specified and directed. 174 URINAL : Supply and fixing ofSensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 175 PILLAR COCK : S&F ofsensorbased table top model Pillar cock with auto closing system of make: Jaquar / Hindware/ Cera. Complete all as specified and directed. 176 CONCEALED STOP COCK : S&F of CP Concealed stop cock of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 177 2 WAY ANGLE COCK : S&F ofCP 2 way angle cock Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed. 178 EWC JET FAUCET : S&F of EWC jet faucet of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 179 BIB COCK : S&F ofCP Bib cock of make: Jaquar(Solo)/Parrywaare(Uno)/ Cera(Fountain). Complete all as specified and directed. 180 SOAP DISH : S&F of SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 181 Hand drier: Supply and fixing of plastic Automatic Hot air drierfor bath rooms of approved make. Make :Orchid / Dolphy / Bajaj. Complete all as specified and directed. 182 Liquid soap dispensar: Supply and fixing of Liquid soap dispensar for bath rooms of approved make. Make :Jaquar / Orchid / Dolphy. Complete all as specified and directed. 183 Toilet paper holder: Supply and fixing of stainless steel single toilet paper roll holder of approved make. Make :Jaquar continental / Parryware sigma/ Cera Icon. Complete all as specified and directed. 184 Urinal partition : Supply and fixing of HPL (High-Pressure Laminate) urinal partitions using 12 mm thick compact board of width 400 to 500 mm and height 1200 mm of approved make and fixing with stainless steel brackts. Complete all as specified and directed. 185 Bldg.Expansion joint : Preparation of joint by grinding of groove surfae, remoal of dust, providing polymer mixed cement mortar on both sidea of groove and crack filling if any in floor level, fixing of baker rod 25x25 mm to control depth of groove, Providing and applying Nitoseal PU50 of Fosroc or equivalant having MAF 25% or above to the groove 25x12 mm. Including fixing / covering of joint with APP based polymetric membrane sheet sufficient width. Complete all as specified and directed at site. 186 Forming V grooves on granite surfacesn,exc 10mmdeep and n exc 10mm on face in steps, cooking platform, and other similar situations etc. 187 Hiring / Engage of JCB for cleaning, moving and loading materials like sand, gravel, or demolitionand removal of debris and other miscellaneous purposes as directd. The rate includes diesel and driver required to run the vehicle. 188 Carpet grass : Supplly and laying of carpet grass on levelled soil surface including preparing the soil bedby loosning the base ground 100 mm thick and removing old unwanted grass if any and necessary watering as directed. 189 Supply and laying of red earth / soil in loose state which is free from debris, grass and other vegitation to be used for gardening purposes as directed. 190 Architectural design : Before commencement of work Contractor should take architectural consultancy servies for entrance arch at the entrance gate, building front elevations and garden designs by authorised institutions / authorised Designer. Complete all as directed by EIC
Contract Date: May 16, 2026 Contract Value : 3.98 Crore
Government Departments No of Bidders 4
29.
Tourism #11099606 AOC
Tender For Civil Works , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directedwithin A Lead Of 50M.All Kinds Of Soil , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : All Works Upto Plinth Level , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For :Foundations, Footings, Bases For Columns , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-20 Grade Of Concrete , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Electrical Work , Supply Of 6M Decorative Single Arm Cameroon Pole With 72W Sabik Ø480mm Crown Tm Pc:- 6M Height Designer Decorative Single Arm Pole Made In Combination Of Steel Pipe Which Is Fabricated Using 114 Mm(+/-3%)Dia Grooved Pipe X 4Mm Thick Base Section With Minimum Height Of 2000Mm. The Pole Is To Be Provided With A Surface Mounting Suitable Base Plate Dia Of 350 Mm And Suitable Thickness As Per Is Standards And Structural Reports. Decorative Knob On The Top Is Made Of Cast Aluminium In Single Piece Of Minimum Height 360Mm. The Pole Should Be Provided With An Inbuilt Junction Box To Fix Four-Way Connector And 6A Mcb At The Bottom - The Inbuilt Box Should Have A Flush Door Of Suitable Size. The Decorative Pedestal To Be Mounted On A Suitable Size Steel Plate. The Pole Shall Be Hot Dip Galvanized. . The Suitable Size Foundation Bolt Shall Be Supply Along With The Pole Of En 8 Grade. The Manufacturer Needs To Provide A Structural Analysis For Structural Stability Of The Pole With The Relevant Is Standards Is 1239/1161/E250 Needs To Be Clearly Mentioned. The Same Needs To Be Confirmed In Form Of Test Certificates From The Manufacturer. Internal Wiring Backelite Sheet And Mcb Included Please Refer The Attached Drawing No - Cameroon 6M Sa Tm Pole. Including 72W Post Top Fixture Suitable To Mount 72W ± 10% With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. The Led Used Should Be High Power Epoxy Leds (Make- Osram/Bridgelux/Nichia/Cree) With Macadam /= 5 And Cri /= 70 And Cct 4000K. The Luminaire Should Have System Efficacy (Lumens/Watt) 110 Lumens/Watt. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Internal Testing Equipments Especially 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report For Led Used In The Fixtures. Similar To Model No. Sabik Ø480mm Crown Tm Pc Clear Sl. The Luminaire Should Be Rohs Compliant As Per Government Notification And With A Valid Bis Number. Luminaire Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Street Light Panel: Supply Installation Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 63A Tpn Mcb As Incommer And 11 Nos Of 16 A Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based 25 A Programmable Digital Almac Timer As Directed By Engineer In-Charge. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 36W And System Lumen Output Of Not Less Than 2910 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Reytek, Leksa, La-Lumirie,Phillips,Havells As Directed By The Engineer Incharge. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 18W And System Lumen Output Of Not Less Than 1490 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 500Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 12W And System Lumen Output Of Not Less Than 980 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 36W And System Lumen Output Of Not Less Than 3020 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 18W And System Lumen Output Of Not Less Than 1550 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of Static White 3000K Neon Flex With Diffused And Homogenous Light Suitable For Outdoor Applications Of Façade Lighting. Silicon Extrusion Flexible Tubes With Side Bending Option. Silicon Extrusion Technology Having Advanced Process, With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Additionally, With High Grade Appearance, Soft Bend Flexibility, Strong Impact Resistant And High Weather Resistance. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M. On Field Cuttable And Assembly, With Endcap Sealed By Gluing Process. Power Consumption Should Be Between 12~14W/M And Have Atleast 120 Leds Per Meter With 120° Beam Angle. Ingress Protection Should Be Ip 67. And Ik Rating Ik07. Size 10Mm X20mm Side Bend. Dimmable Available With Pwm Signal. Operating Temperature: -10°C To 45°C. The Fixture Shall Have Input Voltage For 24V Dc, With External High Efficiency Driver Having Power Factor 0.90, Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided. The Lumen Maintenance L70@ 25 °C Of The Led Shall Not Be Less Than 70% Of The Initial Lumen After 30,000 Burning Hours, With Suitable Aluminium Mounting Profile. * Power Supply: Dc 24V * Operating Temperature Range: -10°C To +45°C * Led Make: Cree/ Osram/ Lumiled/ Seoul/ Nichia/Sanan/Epistar Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Installation Testing And Commissioning Of Smart Lighting Panel , Supplyof 3M Decorative Single Arm Cameroon Pole With 72W Sabik Ø480mm Crown Tm Pc:- 6M Height Designer Decorative Single Arm Pole Made In Combination Of Steel Pipe Which Is Fabricated Using 114 Mm(+/-3%)Dia Grooved Pipe X 4Mm Thick Base Section With Minimum Height Of 2000Mm. The Pole Is To Be Provided With A Surface Mounting Suitable Base Plate Dia Of 350 Mm And Suitable Thickness As Per Is Standards And Structural Reports. Decorative Knob On The Top Is Made Of Cast Aluminium In Single Piece Of Minimum Height 360Mm. The Pole Should Be Provided With An Inbuilt Junction Box To Fix Four-Way Connector And 6A Mcb At The Bottom - The Inbuilt Box Should Have A Flush Door Of Suitable Size. The Decorative Pedestal To Be Mounted On A Suitable Size Steel Plate. The Pole Shall Be Hot Dip Galvanized. . The Suitable Size Foundation Bolt Shall Be Supply Along With The Pole Of En 8 Grade. The Manufacturer Needs To Provide A Structural Analysis For Structural Stability Of The Pole With The Relevant Is Standards Is 1239/1161/E250 Needs To Be Clearly Mentioned. The Same Needs To Be Confirmed In Form Of Test Certificates From The Manufacturer. Internal Wiring Backelite Sheet And Mcb Included Please Refer The Attached Drawing No - Cameroon 6M Sa Tm Pole. Including 72W Post Top Fixture Suitable To Mount 72W ± 10% With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. The Led Used Should Be High Power Epoxy Leds (Make- Osram/Bridgelux/Nichia/Cree) With Macadam /= 5 And Cri /= 70 And Cct 4000K. The Luminaire Should Have System Efficacy (Lumens/Watt) 110 Lumens/Watt. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Internal Testing Equipments Especially 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report For Led Used In The Fixtures. Similar To Model No. Sabik Ø480mm Crown Tm Pc Clear Sl. The Luminaire Should Be Rohs Compliant As Per Government Notification And With A Valid Bis Number. Luminaire Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Installation Testing And Commissioning Of Junction Box Including Terminations Of Size 130 X130 X 77 Mm Of Make Hensel , Charges For Installation Testing And Commissioning Of All Light Fixtures Of Façade Illumination Of Shantadurga Temple And Mahamaya Temple. , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core25sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core10sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Supply And Making Cable End Terminations With Compression Gland And Aluminium Lugs For Following Sizes Of Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. (4) 2 X 10Sq.Mm , Supply And Making Cable End Terminations With Compression Gland And Aluminium Lugs For Following Sizes Of Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. (6) 2 X 25Sq.Mm , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs. D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately).(A) In Soily Strata , Supplying And Laying 25 Mm X 5 Mm Gi Strip In 40 Mm Dia Gi Pipe From Earth Electrode As Required , Supply, Installation, Testing & Commissioning Of Diesel Generator Set 25Kva @20 Kwe With Volvo Eicher Engine, Canopy Made Of Composite Polymer-Based Material, Glass Reinforced Polymer (Grp) Acoustic Enclosure Which Can Be Recycled When Replaced Having Canopy Dimension Of 2825X1090x1425mm (Lxwxh) With Total Canopy Weight Not Exceeding 900Kg. Output Continuous Rating 3 Ph, 415V, 50 Hz 0.8 P. F A.C Supply. A Totally Enclosed Water Cooled 4-Cylinder Engine Developing 38 Bhp At 1500 Rpm With 10% Overload For 1Hour In 12 Hours. The Generator Canopy Shall Be Of Non-Metallic, Non-Rusting I.E. Corrosion Free, Weatherproof, Material Suitable For Coastal And High Humidity Conditions. The Dg Set Shall Comply With Cpcb Iv+ Noise Norm With Sound Absorbing Material To Restrict Sound Level Up To 75Db At 1.0M With The Silencer Positioned Inside The Canopy. The Canopy Shall Maintain Certified Sound Level For Minimum Of 15 Years. The Inbuilt Tank Fuel Capacity At 85 Litres & Maximum Fuel Consumption 5.3 Ltr/ Hr @ 75% Loading. The Generator & Panel Canopy Material Shall Contain Fire Resistant, Additives With Self -Extinguishing And Non -Conductive Properties. The Controller Should Be Fixed In Grp Panel Box Having Metal Hinges With Ss Finish Should Be Welded From Inside Of Box Size Of 650X450x200mm With Box Having Powder Coated In Ral9001 Mounted At Rear Side At Height Of 954Mm From Ground Level. The Dg Should Come With Low Vibration As Per Is8528 Part 9 & Should Be Aesthetically Pleasing In Colour Combination Of White & Anthracite Grey For Canopy With Ral9001 -Ral 7016 Respectively With Base Frame Size Of 285Mm Made Up Of 2.5Mm Thickness In Ral 9005 Maintaining 2 Coat Of Primer & 1 Coat Of Painting Process Thickness 80Microns. All The Painting Shall Be Done By Qualified Painters. Reference To Cat No- Grp Pkgvef-Iv25 Paikane Make Or Equivalent. , Supplying And Erecting Outdoor Type 5 To 7 W Led Focus Light Fitting Complete With Ip67, 24Vdc, 60W Driver, / Power Supply (If Any), Connecting Wire, Including Gear Box And Junction Box For Cable Connectionwith All Necessary Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Beam Angle Requirement As Per Gtdc With 3000K Cct Of Suitable Make Wipro,Legero,Bajaj,Jaquar,Vin Led,K-Lite,Philips Complete With All Required Accessories . , Supplying And Erecting 15 W Wall/Column-Mounted Rectangular Type Led Downlight Ip 65 Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,With 3000K Cct Of Suitable Make Wipro,Legero,Bajaj,Jaquar,Vin Led,K-Lite,Philips. Complete With All Required Accessories . , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 40W And System Lumen Output Of Not Less Than 3250 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 24W And System Lumen Output Of Not Less Than 1950 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 15W And System Lumen Output Of Not Less Than 1180Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 40W And System Lumen Output Of Not Less Than 3320 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.-Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 24W And System Lumen Output Of Not Less Than 1950 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 12W And System Lumen Output Of Not Less Than 1550 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of Static White 3000K Neon Flex With Diffused And Homogenous Light Suitable For Outdoor Applications Of Façade Lighting. Silicon Extrusion Flexible Tubes With Side Bending Option. Silicon Extrusion Technology Having Advanced Process, With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Additionally, With High Grade Appearance, Soft Bend Flexibility, Strong Impact Resistant And High Weather Resistance. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M. On Field Cuttable And Assembly, With Endcap Sealed By Gluing Process. Power Consumption Should Be Between 10~14W/M And Have Atleast 120 Leds Per Meter With 120° Beam Angle. Ingress Protection Should Be Ip 67. And Ik Rating Ik07. Size 10Mm X20mm Side Bend. Dimmable Available With Pwm Signal. Operating Temperature: -10°C To 45°C. The Fixture Shall Have Input Voltage For 24V Dc, With External High Efficiency Driver Having Power Factor 0.90, Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided. The Lumen Maintenance L70@ 25 °C Of The Led Shall Not Be Less Than 70% Of The Initial Lumen After 30,000 Burning Hours, With Suitable Aluminium Mounting Profile. * Power Supply: Dc 24V * Operating Temperature Range: -10°C To +45°C * Led Make: Cree/ Osram/ Lumiled/ Seoul/ Nichia/Sanan/Epistar Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supplyof Decorative Post Top Led Luminaire Is Designed With A Robust Die-Cast Aluminium Housing And A Clear Injection Moulded Polycarbonate Diffuser,Ensuring Long Life And Durability Against Outdoor Environmental Conditions. It Features An Ingress Protection Rating Of Ip65 And An Impact Resistance Of Ik08, Making It Both Dust-Tight And Resistant To Heavy Impacts. The Luminaire Is Aesthetically Designed With An Overall Diameter Of 460 Mm And A Height Of 785 Mm, And It Is Suitable For Mounting On A Ø 60 Mm Pole Pipe. Top Cover Made Of Spun Aluminium With Decorative Knob On Top Made Of Die Cast Aluminium As Shown In The Drawing For Unique And Better Aesthetics. The Luminaire Should Have Effective Heatsink For Thermal Management For Longer Life Of The Leds. The Luminaire Shall Be Provided With Type V Optics To Provide Uniform Photometric Distribution Suitable For Typical 360 Degree Illumination And Facilitate Minimum Glare, With Degree Of Protection As Ip65 Lamp Compartment. The Design Of The Fixture Has To Be The Same Aesthetics As Shown In The Drawing. The System Ac Wattage Of The Luminaire Shall Be 45W (± 10%) With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. Colour Temperature (Cct) Of 3000K, Colour Rendering Index Cri /= 70 And Residual Flux Of 70% (L70) @ 50,000 Hours At Ta Of 25°C. The Luminaire Shall Be Suitable For Operating Within Temperature Range From - 10°C To + 45°C. The Led Used Should Be High Power Leds (Make- Osram/Bridgelux/Nichia/Cree/Lumiled) With Macadam /= 5. The Luminaire Should Be Designed To Operate At Any Voltage From 140V To 280V, With Power Factor = 0.95 And Shall Be Provided With Optional Built In Over Voltage And Under Voltage Protection And Internal Surge Protection Of 4/4 Kv In Both Common & Differential Modes And External Surge Protection Of 10 Kv, Electrical Class I. The Driver Arrangement Should Be Such That It Can Be Easily Maintained Without Opening The Ip65 Lamp Compartment. All The Mounting Hardware Shall Be Ss304/316 Grade For Better Life. The Luminaire Shall Comply With Safety Requirements Of Applicable Bis Standard And The Bidder Shall Submit A Copy Of Valid Bis Certificate. Overall Outer Dimensions Of Luminaire Shall Be Ø460mm (±3%) And 785Mmh (±3%) Height And The Shape Shall Be As Per The Sketch Attached Herewith. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Valid Iso 9001:2015. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report Along With The Tender. Similar To Model No. Columba Pt 45W Opal Led 30K . The Luminaire Should Be With A Valid Bis Number. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Charges For Installation Testing And Commissioning Of All Light Fixtures Of Poles And Compund Lights Of Kelbai Temple.
Contract Date: May 31, 2026 Contract Value : 2.23 Crore
Government Departments No of Bidders 3
30.
Educational and Research Institute #11098868 AOC
Tender For Iehe Bhopal Invites Online Tender For Supply Of Sound System In The Institute , Sound System , Wall Mount Cabinet Loudspeaker General Requirements: The Loudspeaker Shall Be A Cost-Effective, 12W General-Purpose Cabinet Speaker Designed For Indoor Surface-Mount Applications. It Must Be Suitable For Both High-Quality Speech Intelligibility And Background Music Reproduction Acoustic Performance: Rated Power: 12W, With Adjustable Power Tappings At 12W, 6W, And 3W To Allow For 3 Db Step Adjustments. Sound Pressure Level (Spl): Must Provide A Maximum Special Of 102.0 Db At 6W/1M (1 Khz) And A Sensitivity Of 91.7 Db At 1W/1M (1 Khz). Frequency Range: The Effective Frequency Range Shall Be From 150 Hz To 15 Khz. Opening Angles: Horizontal: 184° (1 Khz) / 86° (4 Khz). Vertical: 66° (1 Khz) / 58° (4 Khz). Electrical Specifications: Input Voltage: Designed For 100 V Line Systems. Rated Impedance: 833 Ohms. Connection: Shall Feature A 4-Pole Push-In Terminal Block On The Rear Panel For Easy On-Site Wiring And Power Tapping. Durability: The Unit Must Be Tested For 100 Hours Of Continuous Operation At Rated Power In Accordance With Iec 268-5 Standards. Mechanical Construction Enclosure Material: The Main Body Shall Be Constructed From Solid Mdf (Medium Density Fiberboard) Covered In Durable, Easy-To-Clean Black Vinyl. Front Grille: The Front Shall Be Abs Plastic Covered With A Fine Woven Cloth In Matching Black. Baffle Design: Shall Feature An Angled Front Baffle To Optimize Sound Distribution Within The Listening Area. Mounting: The Rear Panel Must Include Three Keyholes For Quick And Secure Wall Mounting. Dimensions: 445 Mm X 151 Mm X 150 Mm / 111 Mm Environmental Limits: Operating Temperature: -5 °C To +55 °C, Storage Temperature: -40 °C To +70 °C , Wireless Microphone System General System Requirements: Classification: The System Shall Be An Entry-Level Professional Wireless Microphone System Designed For Ruggedness And Ease Of Use In Daily Operations. Ease Of Setup: The System Must Include A One-Button Automatic Frequency Scanning Function To Identify The Clearest Available Channel. Transmitter Synchronization Shall Be Achieved Via An Infrared Data Link To Ensure Error-Free Setup. Frequency Management: The System Shall Provide 32 Preset Channels, With Compatible Groups Of Eight Channels For Simultaneous Multi-Channel Use. Operating Bands: The System Shall Be Available In Multiple Rf Frequency Bands, Including: A Band: 618-634 Mhz. B Band: 678-694 Mhz. C Band: 516-532 Mhz. E Band: 850-865 Mhz. Receiver Specifications Type: Synthesized Pll With True Antenna Diversity To Ensure Stable Rf Reception. Chassis: The Receiver Must Feature A True Rack-Mountable Metal Chassis Suitable For Professional Installation. Rf Performance: Sensitivity: 1.0 Μv For 12 Db Sinad. Image Rejection: Greater Than 55 Db. Audio Outputs: Balanced Output: 20 Dbv (Max @ 40 Khz Deviation). Unbalanced Output: Adjustable From 8 Mv To 0.755V Rms. Display: Front-Panel Backlit Lcd Displaying Channel, Frequency, And Battery Status. Handheld Transmitter Construction: The Transmitter Shall Feature A Rugged Metal Body Designed To Withstand The Rigors Of Daily Use. Microphone Capsule: Equipped With A Cardioid Dynamic Capsule (Pl22) For Effective Feedback Control And Ambient Noise Rejection. Battery Life: Must Operate For A Minimum Of 14 Hours Using Two Aa Alkaline Batteries. User Interface: Features A Backlit Lcd Display And A Dedicated Mute Function To Protect The Audio Channel. Bodypack Transmitter Construction: Compact And Rugged Metal Enclosure. Input Connector: Industry-Standard Ta4F Connector For Compatibility With Various Lapel Or Headworn Microphones. Antenna: Flexible External 1/4 Wave Antenna. Acoustic & Environmental Performance System Frequency Response: 80 Hz - 18 Khz ± 2 Db Signal-To-Noise Ratio: 100 Db A-Weighted Total Harmonic Distortion: 1.0%, 0.4% Typical (Ref 1 Khz, 40 Khz Deviation) , Professional Gooseneck Microphone General Requirements: The Microphone Shall Be A Professional-Grade, High-Quality Electret Condenser Gooseneck Microphone Designed For Public Address Applications Such As Lecterns, Podiums, And Open Conferences. It Must Feature A Sleek, Slender, And Unobtrusive Design To Maintain A Clear Line Of Sight For The User. Acoustic & Technical Performance Transducer Type: Electret Condenser. Polar Pattern: Unidirectional (Cardioid) To Ensure High Front-To-Back Rejection, Providing More Gain Before Feedback. Frequency Response: Wide Range From 20 Hz To 18,000 Hz. Sensitivity: 7.5Mv/Pa Power Requirement: Operable Via A Dc Power Source Ranging From 1.5V To 9V. Mechanical Specifications Overall Length: 585 Mm (Approximately 23 Inches) Output Connector: Built-In 3-Pin Xlr Male Socket For Secure And Standard Professional Connectivity. Optional Accessories (Compatibility) To Ensure System Flexibility, The Microphone Must Be Compatible With The Following Manufacturer-Specific Accessories: Microphone Base: A Sturdy, Heavy-Duty Die-Cast Aluminium Base With An Integrated On/Off Switch, Led Indicator, And Built-In Housing For 2 Times 1.5V Um-3 Aa Cells To Power The Condenser Element. Mic Stand Adaptor: A Rugged Aluminium Die-Cast Body With A Female Xlr Connector For Direct Mounting And A Male Xlr Bottom Connector For Cable Attachment. It Must Include A 10-Meter Shielded Cable And A Threaded Brass Ferrule 5/8 27 Tpi For Standard Stand Mounting. , Mixer Amplifier General System Requirements Type: The Unit Shall Be A Professional 120W Mixer Amplifier With Integrated Usb And Bluetooth Capabilities, Designed For Public Address And Background Music Applications. User Interface: The Amplifier Shall Feature A Simplified User Interface With Preferred Setting Indicators (Colored Pins) For All Front-Panel Knobs To Ensure Ease Of Operation For Non-Technical Users. It Must Include An Led Vu Meter For Visual Output Level Indication And A 6.3 Mm Headphone Socket For Monitoring The Mixer Output. Reliability: The Unit Shall Have No Moving Parts (Such As Hard Drives) To Ensure Long-Term Operational Reliability. Audio Inputs And Media Source Microphone/Line Inputs: Four (4) Balanced Inputs, Switchable Between Microphone And Line Level Sensitivity. Switchable Phantom Power Must Be Available To Support Condenser Microphones. Priority Handling: Input 1 Shall Have The Capability To Take Priority Over All Other Inputs Via Contact Closure (Push-To-Talk) And Include An Optional 2-Tone Chime To Precede Announcements. Music Source: Integrated Media Player: Must Support Playback Of Mp3 And Wav Files (From 32 Kbit/S) Via A Usb Pen Drive (Up To 32Gb Capacity). Wireless Streaming: Built-In Bluetooth For High-Quality Audio Streaming From Mobile Devices. Remote Control: The Unit Must Be Supplied With An Ir Remote Control For The Integrated Music Source. Aux Input: A Separate Stereo Cinch Input, Internally Converted To Mono, With A Sensitivity Of 200 Mv To 300 Mv. Audio Performance And Output Output Power: 120W Rated Output Power. Loudspeaker Outputs: Constant Voltage: 100 V. Low Impedance: 4-Ohm. Call-Only Output: A Dedicated 100 V Call-Only Channel For Priority-Only Areas Or 3-Wire Remote Volume Control Override. Frequency Response: 80 Hz To 18 Khz (+1/-3 Db At -10 Db Ref. Rated Output). Distortion: 1% At Rated Output Power (1 Khz). Tone Control: Dedicated Bass And Treble Controls Providing Max ± 8 Db Adjustment. System Protection: An Integrated Limiter Circuit Must Be Included To Protect The Output Stage From Signal Clipping And Overload. Insert Feature: A Pair Of Rca Cinch Connectors Shall Be Provided To Allow The Unit To Be Used As A Separate Pre-Amplifier And Power Amplifier. Mechanical And Environmental Dimensions: 100 Mm X 430 Mm X 290 Mm (Standard 19 Wide, 2U High). Mounting: Suitable For Both Stand-Alone Use And 19 Rack Mounting. Operating Temperature: -5 °C To +45 °C. Compliance: The Unit Shall Comply With Iec 62368-1 (Safety), Cispr 32 (Emc Emission), And En 55103-2 (Emc Immunity). , Mixing Console General Requirements The Mixing Console Shall Be A Compact, Versatile 6-Channel Analog Mixer Designed For A Wide Range Of Professional Audio Applications. It Must Feature High-Quality Microphone Preamplifiers And A Rugged Construction Suitable For Both Portable And Fixed Installations. Audio Inputs And Processing Input Channels: The Unit Shall Provide A Total Of 6 Line Inputs, Configured As 2 Mono And 2 Stereo Channels. Microphone Preamplifiers: The Console Shall Include 2 Microphone Inputs Featuring Discrete Class-A D-Pre Preamps With An Inverted Darlington Circuit For Superior Sound Quality. Switchable +48V Phantom Power Must Be Available For All Microphone Inputs. Channel Processing: Mono Inputs (Ch1-2) Shall Include A 26Db Pad For High-Level Sources. Each Mono Channel Shall Feature A High-Pass Filter (Hpf) Set At 80Hz With A 12Db/Octave Slope. Equalization For Mono Channels Shall Consist Of A 2-Band Eq: High (10Khz Shelving) And Low (100Hz Shelving) With Pm15 Db Adjustment. Output And Bus Section Buses: The Console Shall Feature 1 Stereo Bus. Outputs: Stereo Out: Provided Via 2 Xlr-3-32 And 2 Phone Jacks (Balanced). Headphones: One (1) Stereo Phone Jack Output With A Dedicated Level Control. Monitoring: Visual Monitoring Shall Be Provided By A 2 Times 7 Point Led Level Meter (Peak, +6, +3, 0, -3, -10, -20Db). Technical Performance Frequency Response: Pm 0.5Db From 20Hz To 20Khz (Referenced To Nominal Output Level @ 1Khz). Total Harmonic Distortion (Thd): 0.01% @ +8Dbu (20Hz To 20Khz), Gain Knob: Min 0.003% @ +18Dbu (1Khz), Gain Knob: Min Hum & Noise: Equivalent Input Noise Of -128 Dbu (Mono Input Channel, Rs: 150Ω, Gain Knob: Max) Crosstalk: -88Db @ 1Khz. Mechanical And Electrical Specifications Chassis: The Unit Shall Be Housed In A Robust, Impact-Resistant, Powder-Coated Metal Chassis. Power Supply: External Ac Adapter: Pa-130 (120V 60Hz) Or Mu18 (100-240V 50/60Hz) Or Equivalent. Power Consumption Shall Be Approximately 12W. , Indoor Wi-Fi6 Access Point General System Requirements Type: The Unit Shall Be A High-Performance, High-Speed 11Ax (Wi-Fi 6) Indoor Dual-Band Ceiling-Mounted Wireless Access Point (Ap). Standard Support: The Wireless Access Point (Ap) Shall Strictly Adhere To The Ieee 802.11Ax (Wi-Fi 6) Standard. Radio Configuration: The Unit Must Be A High-Power Industrial Ceiling-Mounted Ap Featuring 2X2 Mimo Technology For Both 2.4 Ghz And 5 Ghz Bands. Performance: The System Must Provide A Combined Wireless Data Rate Of Up To 3 Gbps To Support High-Speed Applications Such As 4K/8K Streaming And Vr/Ar. User Capacity: The System Shall Support A High Density Of Users, Accommodating Up To 128 Concurrent Users (Max 64 Users Per Band). Advanced Features: The Ap Shall Support Multi-User Mimo (Mu-Mimo), Orthogonal Frequency Division Multiple Access (Ofdma), Bss Color Bit, And Dynamic Cca-Sd For Improved Interference Management. Hardware Specifications Chipset: The Ap Shall Be Equipped With A High-Performance 4-Core Qualcomm Chipset. Ram: 512Mb Ddr3. Antenna: Integrated Internal 4X4Dbi Dual-Band Mimo Antennas. Combined Rate: A Concurrent Wireless Rate Of Up To 3000 Mbps. Physical Interfaces: 1 X 10/100/1000Mbps Wan/Poe Port. 1 X 10/100/1000Mbps Lan Port. 1 X Reset Button. Provision For A Dc2.0 12V 1.5A Power Connector. Support For Power Over Ethernet (Poe) Following Ieee 802.3Af/802.3At Standards. Thermal Management: The Unit Shall Feature A Heat Sink With A Snap-On Structure And Special Surface Coating To Optimize Heat Dissipation. Indicators: Led Status Lights For Power, Cloud Connection, Lan Speed, 2.4Ghz Status, And 5.0Ghz Status. Audio & Network Management Quality Of Service: Must Support Wmm (Wireless Multimedia Prioritization). Roaming: Support For Seamless Roaming To Ensure Uninterrupted Connectivity For Mobile Clients. Deployment: Flexible Deployment Options Including Standalone Mode, Mobile App Management, And Zero Touch Provisioning (Ztp). Network Management: Support For Vlan Settings, Cloud Access (In Gateway Mode), And System Logging. Management: Support For Remote Configuration And Management. Maintenance: Features For Backup/Restore Configuration, Factory Reset, Scheduled Reboots, And Lifetime Firmware Upgrades. Security Requirements Encryption: Must Support Wi-Fi Protected Access 3 (Wpa3) And Wired Equivalent Privacy (Wep) 64-Bit, 128-Bit, And 156-Bit. Access Control: Integrated Mac Address Filtering And Wireless Access Control To Identify Authorized Devices. Management Security: Secure Socket Layer (Ssl) For Remote Management Login And The Ability To Block Ssid Broadcasting. Environmental & Reliability Operating Limits: Working Temperature: -10°C To 55°C. Storage Temperature: -40°C To 70°C. Humidity: 5% To 95% Non-Condensing. Protection: Esd: Air ±8K, Touch 6K. Electrical Surge: Common Mode 2K, Differential Mode 1K. Power Efficiency: Maximum Power Consumption Shall Not Exceed 16 Watts. Oem Warranty And Support Local Presence: The Original Equipment Manufacturer (Oem) Must Have An Authorized Service Center Or Registered Office In Madhya Pradesh (Proof Of Gst/Msme/Registration Required With Bid). Warranty: A 2-Year On-Site Hardware Replacement Warranty Is Required, With New Hardware Provided Within 12 Hours Of A Call Lock (No Refurbished Or Repaired Products). Technical Support: On-Site Support Must Be Available Within 6 Hours Of A Request. Future Warranty & Support: Oem Must Have Warranty And Support Pack Purchase Option Before Expiry Of Warranty Period For Next Years. Service Availability: The Oem Must Provide A 24X7 1800-Series Toll-Free Number With Support Available In The Local Hindi Language. Product Life Cycle: The Quoted Product Must Have A Life Cycle Of No Less Than 5 Years From The Date Of Supply, Including Lifetime Free Firmware And Technical Assistance. Certifications: The Product Must Be Ce, Fcc, Rohs, Iec 15408 And Iso 9001. Certified. Bidder Must Have To Submit Compliance On Oem Letter Head Along With Maf. , Network Wall Mount Rack Must Have To Supply And Installation Of 15U 500X550 Network Wall Mount Rack With Glass Door And Lock With Hardware, 6 Socket Industrial Pdu 15Amp With Mcb, Cable Manager, Fan, Hardware And Etc. , Goosneck Mic Cable, Speaker Cable In Meter, Installation And Accessories Complete Job Work With Required Cables, Frpvc Conduit, Accessories, Fitting, Installation And Etc.
Contract Date: Jun 09, 2026 Contract Value : 2.02 Lakh
Local Bodies No of Bidders 3
Madhya Pradesh View Result →
31.
Educational and Research Institute #11093693 Technical Bid
Tender For Nit For Annual Rate Contract For Supply Of Various Drugs, Medicine And Surgical Items For Ruhs Hospital, Jaipur , Bupivacaine Hydrochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg [2] , Bupivacaine Inj Ip 0.5% [4] , Halothane Bp [6] , Isoflurane Usp [7] , Ketamine Inj Ip 50 Mg/ Ml [8] , Lignocaine Ointment 5 O/O [9] , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg [ 10] , Lignocaine Gel Ip 2% [ 12] , Lignocaine Inj Ip 2 O/O [ 13] , Propofol Inj Ip 10 Mg/ Ml [14] , Thiopentone Inj Ip 0.5 G [15] , Sevoflurane [491] , Atropine Sulphate Injection 0.6Mg/Ml [654] , Liquid Medical Oxygen (Lmo) [799] , Diclofenac Sodium Inj Ip 25 Mg/ Ml (Im/Iv Use) [19] , Diclofenac Gastro Resistant Tablet Ip 50 Mg(Enteric Coated) [20] , Fentanyl Citrate Injection Ip 2 Ml [21] , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg [22] , Ibuprofen Tab Ip 200 Mg (Coated) [23] , Ibuprofen Tab Ip 400 Mg (Coated) [24] , Morphine Sulphate Inj Ip 10Mg/Ml [25] , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip(Each Ml Contains Paracetamol 150Mg) [26] , Paracetamol Syrup Ip 125 Mg/5Ml 60 Ml Pack (Detail In Rc) [27] , Paracetamol Tab Ip 500 Mg [28] , Paracetamol Inj. 150 Mg/Ml [29] , Pentazocine Inj Ip 30Mg/Ml (Im/Iv Use) [30] , Tramadol Cap Ip 50 Mg [32] , Tramadol Inj 50 Mg/Ml [33] , Indomethacin Cap Ip 25 Mg [436] , Diclofence Prolonged Release Tablet Ip 100 Mg [437] , Ibuprofen Oral Suspension Bp /Usp 100 Mg/ 5 Ml 60 Ml Pack [477] , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg [ 483] , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg [ 492] , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methylsalicylate 10%, Linseed Oil 3%, Menthol 5% [493] , Etoricoxib Tab Ip 120Mg [495] , Mefenamic Acid Tablets Bp 500 Mg [496] , Fentanyl Citrate Injection 50Mcg/Ml [655] , Naproxen Tablet Ip 500Mg [656] , Naproxen Tablet Ip 250Mg [657] , Etoricoxib Tablet Ip 90 Mg [658] , Aspirin Tablet Ip (Gastro-Resistant) 150 Mg [679] , Diclofenac Sodium Aqueous Injection 75Mg/ Ml 1Ml Size, Iv & Im Use [695] , Paracetamol Infusion Ip 1% W/V 100Ml Size [696] , Ketorolac Tromethamine Dispersible Tablet 10 Mg(Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg) [ 697] , Baclofen Tablet Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [698] , Tizanidine Hydrochloride Tablet Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) [699] , Adrenaline Injection Ip 1Mg/Ml Im/Iv Use [34] , Betamethasone Tab Ip 0.5Mg [35] , Chlorpheniramine Maleate Tab Ip 4Mg [37] , Dexamethasone Inj Ip 8Mg/2Ml [39] , Dexamethasone Tab Ip 0.5 Mg [40] , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial (Im/ Iv Use) [42] , Hydroxyzine Tab Ip 25 Mg [43] , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg [ 44] , Pheniramine Inj Ip 22.75Mg /Ml [45] , Prednisolone Tab Ip 5 Mg [47] , Promethazine Syrup Ip 5 Mg/5Ml 60 Ml Pack [48] , Promethazine Inj Ip 25Mg/Ml [49] , Promethazine Tab Ip 25 Mg [50] , Betamethasone Sod Phos Inj Ip 4Mg/Ml [418] , Prednisolone Tablet Ip 10 Mg [469] , Prednisolone Tab Ip 20 Mg [470] , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg 60 Ml Pack [ 497] , Cetirizine Syrup Ip 5Mg/ 5 Ml 60 Ml Pack[499] , Levoceitrizine Tablet 5Mg [659] , Montelucast(10Mg) + Levocetrizine Tablet ( 5Mg) [660] , Dexamethasone Tablet Ip 4 Mg (Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg) [700] , Naloxone Inj Ip 0.4Mg/ Ml [51] , Pralidoxime Chloride Injection Ip 25 Mg/Ml / 500 Mg [52] , Acetylcystine Solution Usp (Injection) 200 Mg/ Ml [500] , Carbamazepine Tab Ip 200 Mg [53] , Carbamazepine Tab Ip 100 Mg [54] , Phenobarbitone Tab Ip 30 Mg [56] , Phenytoin Injection Bp 50Mg/Ml [57] , Phenytoin Oral Suspension Ip 25Mg/Ml 100 Ml Pack [58] , Phenytoin Tab Ip 100 Mg (Film Coated) [59] , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg [61] , Phenobarbitone Inj Ip 200Mg/Ml [420] , Carbamazepine Oral Suspension Usp 100 Mg/5Ml 100 Ml Pack [474] , Sodium Valproate Oral Solution Ip 200 Mg /5 Ml 100 Ml Pack[479] , Sodium Valproate Tablet(Gastro Resistant) Ip 500Mg [661] , Clobazam Tablet Ip/ Capsule 5 Mg [662] , Clobazam Tablet/ Capsule 10 Mg [663] , Levetiracetam Tablet Ip 500 Mg [664] , Levetiracetam Oral Solution/Suspension 100Mg/Ml 100 Ml Pack [665] , Levetiracetam Injection 500Mg/5Ml [666] , Gabapentine Tablet/ Capsule 100Mg [667] , Gabapentine Tablet/ Capsule 300Mg [668] , Lamotrigine Tablet Ip 50 Mg (Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg) [701] , Divalproex Extended Release Tablet Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) [702] , Oxcarbazepine Tablet Ip 150 Mg (Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg) [703] , Lacosamide Tablet 100 Mg (Each Film Coated Tablet Contains Lacosamide 100 Mg) [ 704] , Topiramate Tablet Ip 25 Mg (Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) [ 705] , Acyclovir Oral Suspension Ip 400Mg/ 5Ml 100 Ml Pack [62] , Acyclovir Tab Ip 200 Mg [63] , Acyclovir Tab Ip 800 Mg [64] , Albendazole Oral Suspension Ip 400 Mg/ 10Ml [65] , Albendazole Tablets Ip 400 Mg(Detail In Rc) [ 66A] , Amikacin Inj Ip 100 Mg [67] , Amikacin Inj Ip 500 Mg [68] , Amoxycillin And Cloxacillin Cap 250 + 250 Mg [69] , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125Mg [70] , Amoxycillin Cap Ip 250Mg [71] , Amoxycillin Cap Ip 500Mg [72] , Amoxycillin Dispersible Tablets Ip 125 Mg [73] , Amphotericin B Inj Ip 50 Mg [74] , Ampicillin Injection Ip 500 Mg [75] , Azithromycin Tab 100 Mg Dispersible Tabs (3 Tab Strip 10X3x3) [78A] , Azithromycin Tablets Ip 250Mg [79A] , Azithromycin Tab Ip 500 Mg [80A] , Benzathine Benzylpenicillin Inj Ip 12 Lac Units [81] , Benzathine Benzylpenicillin Inj Ip 6 Lac Units [82] , Cefixime Tab Ip 100 Mg/Cefixime Dispersible Tab Ip 100 Mg [84] , Cefixime Tab Ip 200 Mg [85] , Cefoperazone And Sulbactum For Inj (Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm) (Im/Iv Use) [86] , Cefotaxime Injection Ip 1 G [87] , Cefotaxime Inj Ip 250 Mg [88] , Ceftazidime Inj Ip 1G [ 89] , Ceftazidime Inj Ip 250 Mg [90] , Ceftazidime Inj Ip 500 Mg [91] , Ceftriaxone Inj Ip 1G / Vial [93] , Ceftriaxone Inj Ip 250 Mg/Vial [94] , Ceftriaxone Inj Ip 500Mg/Vial [95] , Cephalexin Cap Ip 250 Mg [96] , Cephalexin Cap Ip 500 Mg [97] , Chloroquine Phosphate Inj Ip 40 Mg/ Ml [98] , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated [99] , Chloroquine Phosphate Suspension Ip 50 Mg/ 5Ml [100A] , Ciprofloxacin Injection Ip 200Mg/100Ml [101] , Ciprofloxacin Tablets Ip 250 Mg Film Coated [ 102] , Ciprofloxacin Tablet Ip 500 Mg Film Coated [ 103] , Clotrimazole Cream Ip 2% W/W [104] , Clotrimazole Vaginal Tab Ip 500Mg [105] , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg 60 Ml Pack [107] , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [108] , Diethylcarbamazine Tab Ip 100 Mg [110] , Doxycycline Cap Ip 100 Mg [111] , Fluconazole Tablets Ip 150Mg [114A] , Gentamycin Injection Ip 80Mg/2Ml (Im/ Iv Use) [116] , Griseofulvin Tab Ip 125 Mg [117] , Itraconazole Cap 100 Mg [118] , Meropenem Inj Ip 500 Mg [119] , Metronidazole Inj Ip 500 Mg/100Ml [120] , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base/5Ml [121] , Metronidazole Tablets Ip 200 Mg (Film Coated) [122] , Metronidazole Tablets Ip 400 Mg (Film Coated)[123] , Norfloxacin Tab Ip 400Mg Film Coated [ 124] , Ofloxacin Tab Ip 200 Mg [125] , Primaquine Tab Ip 2.5 Mg [128] , Primaquine Tab Ip 7.5 Mg [129] , Quinine Dihydrochloride Inj Ip 300 Mg/Ml [131] , Quinine Sulphate Tablets Ip 300 Mg (Film Coated) [132] , Ampicillin Cap Ip 500Mg [412] , Nitrofurantoin Tab Ip 100Mg [413] , Cloxacillin Sodium Inj Ip 500Mg [417] , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip) 125Mg/ 5 Ml [427] , Ofloxacin Oral Suspension Ip 50Mg/ 5Ml 60 Ml [428] , Tinidazole Tab Ip 300 Mg (Film Coated) [430] , Tinidazole Tab Ip 500 Mg (Film Coated) [431] , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg [468] , Amoxycillin Oral Suspension Ip (Dry Syrup) 125 Mg/5Ml [473] , Cefpodoxime Dispersible Tab 50 Mg [ 475] , Cephalexin Tablets 125 Mg (Dispersible Tablets) [476] , Meropenem Inj. Ip 1Gm [481] , Acyclovir Intravenous Infusion Ip 250Mg [502] , Acyclovir Intravenous Infusion Ip 500Mg [503] , Amikacin Inj Ip 250 Mg [504] , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg [505] , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm [506] , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg/5 Ml ( 30Ml Bottle) [507] , Artesunate Injection 60 Mg (I.M. I.V.Use) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O/O W/V (1Ml Ampoule),Sodium Chloride Injection Ip 0.9O/O W/V ( 5Ml Ampoule) [508A] , Aztreonam Injection Usp 500 Mg [509] , Cefepime Injection Ip 500 Mg [510] , Cefixime Oral Suspension Ip 25Mg/Ml (Paediatric Drops) [511] , Cefuroxime Axetil Tab Ip 250 Mg [512] , Clindamycin Capsule Ip 150Mg [513] , Clindamycin Capsule Ip 300 Mg [514] , Levofloxacin Tablets Ip 250 Mg [515] , Linezolid Tablets Ip 600 Mg [516] , Linezolid Inj 200Mg/ 100Ml [517] , Mefloquine Tablets Ip 250 Mg [518] , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg [520] , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) [521] , Vancomycin For Intravenous Infusion Ip 500 Mg [523] , Vancomycin For Intravenous Infusion Ip 1 Gm [524] , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg) [651] , Co-Trimoxazole Tablet Ip (Trimethoprim 160Mg+ Sulphamethoxazole 800Mg) [669] , Aztreonam Injection 1Gm [683] , Framycetin Sulphate Cream 1 O/O 30Gm Pack [684] , Framycetin Sulphate Cream 1 O/O 100 Gm Pack [685] , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg) [686] , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg [ 706] , Piperacillin Injection 2 Gm + Tazobactom 250Mg Ip [707] , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection [708] , Cefadroxil Dispersible Tablet 250 Mg(Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg) [709] , Cefadroxil Tablet 500 Mg [710] , Ofloxacin Oral Suspension Ip (Each 5Ml Contains Ofloxacin Ip 100 Mg) 30 Ml Size [ 711] , Levofloxacin Tablet Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) [712] , Faropenem Tablet Sodium 200 Mg (Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg) [713] , Clindamycin Phosphate Injection Ip 300 Mg [714] , Imipenem + Cilastatin Injection 500Mg/500Mg Ip Powder For Solution [ 715] , Polymixin Sulphate B Injection Usp 5 Lac I.U. [716] , Meropenem Injection Ip 250 Mg [717] , Colistimethate Injection Ip 1M Iu Powder For Solution [718] , Voriconazole Injection 200Mg/Vial [720] , Terbinafine Hydrochloride Tablet 250 Mg [721] , Valganciclovir Tablet 450 Mg [722] , Entecavir Tablet Ip 0.5 Mg (Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg) [ 723] , Ganciclovir Sodium Injection 500Mg ( Lyophilized Powder For Reconstitution) [724] , Azathioprine Tab Ip 50 Mg [133] , Bleomycin Injection Ip 15Mg (Bleomycin Sulphate Injection 15Units) [134] , Chlorambucil Tab Ip 5 Mg [136] , Cisplatin Inj Ip 50 Mg/ 50 Ml [137] , Cyclophosphamide Inj Ip 200 Mg [138] , Cyclophosphamide Inj Ip 500 Mg [139] , Cytarabine Injection Bp 500Mg [141] , Danazol Cap Ip 50 Mg [ 142] , Daunorubicin Inj Ip 20 Mg [143] , Doxorubicin Inj Ip 50 Mg/ 25 Ml [144] , Etoposide Inj Ip 100 Mg [146] , Fluorouracil Inj Ip 250 Mg/ 5Ml [148] , L-Asparaginase Inj 10000 Iu [149] , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg /Ml [150] , Melphalan Tab Ip 5 Mg [151] , Mercaptopurine Tab Ip 50 Mg [152] , Methotrexate Inj Ip 50 Mg/2 Ml [153] , Methotrexate Tab Ip 2.5 Mg [154] , Paclitaxel Inj Ip 260 Mg [155] , Paclitaxel Inj Ip 100 Mg [156] , Tamoxifen Tab Ip 10 Mg [157] , Vinblastine Inj Ip 10Mg/ 10Ml [158] , Vincristine Inj Ip 1Mg( Vial)/Vincristin Injection Usp 1Mg/Ml (Amp) [ 159] , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit [525] , Carboplatin Injection Ip 150 Mg [526] , Carboplatin Injection Ip 450 Mg [527] , Cisplatin Inj Ip 10 Mg/ 10 Ml [528] , Dacarbazine Injection 500 Mg Ip [529] , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor) (Sc/ Iv Use) 300 Mcg [530] , Gemcitabine For Injection 200 Mg [531] , Gemcitabine For Injection Ip 1Gm [532] , Ifosfamide Injection Ip 1Gm [533] , Imatinib Tab Ip 400Mg [ 534] , Methotrexate Tablets Ip 10 Mg [536] , Oxaliplatin Injection Usp 50 Mg [538] , Cyclosporin Capsule Ip 50 Mg [677] , Bendamustine Injection 100 Mg [726] , Capecitabine Tablet Ip 500 Mg (Each Film Coated Tablet Contains Capecitabine Ip 500 Mg) [727] , Letrozole Tablet Ip 2.5 Mg (Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg) [ 728] , Temozolomide Capsule Ip 100 Mg (Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg) [729] , Bortezomib Injection 2Mg [730] , Abiraterone Acetate Tablet Ip 250 Mg (Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg) [731] , Thalidomide Capsule Usp 100 Mg (Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg) [733] , Bevacizumab Injection 400 Mg [734] , Bevacizumab Injection 100 Mg [735] , Cyclophosphamide Tablet Ip 50 Mg (Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50Mg) [736] , Gefitinib Tablet Ip 250 Mg (Each Film Coated Tablet Contains Gefitinib Ip 250 Mg) [737] , Mycophenolate Mofetil Capsule/Tablets Ip 250 Mg (Each Capsule/ Tablets Conatin Mycophenolate Mofetil Ip 250 Mg) [738] , Tacrolimus Capsule Ip 0.5 Mg (Each Hard Gealtin Capsuletacrolimus Ip 0.5 Mg) [ 739] , Mycophenolate Sodium Tablet 360 Mg (Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg) [740] , Bicalutamide Tablet Ip 50 Mg (Each Film Tablet Contains Bicalutamide Ip 50 Mg) [741] , 6 Thioguanine Tablet Usp 40 Mg (Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg) [742] , Zoledronic Acid Injection Ip 4Mg Vial [ 743] , Dasatinib Tab 100 Mg [ 797] , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg [160] , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg [161] , Trihexyphenidyl Hcl Tab Ip 2 Mg [162] , Bromocriptine Tablets Ip 2.5 Mg [540] , Acenocoumarol Tab Ip/ Nicoumalone Tab Ip 2 Mg [163] , Deferasirox Tab 100 Mg [165] , Deferasirox Tab 500 Mg [166] , Deferiprone Cap 250Mg [167] , Deferiprone Cap 500 Mg [168] , Desferrioxamine Injection Ip 500 Mg / Vial (For I.M. Inj And I.V S.C. Infusion) [169] , Dried Human Anti Haemophlic Fraction Ip (Dried Factor Viii Fraction Ip) 250 Iu/ Vial (Iv Use) [171] , Enoxaparin Sodium Inj Ip 60 Mg [172] , Ethamsylate Inj 250 Mg/ 2Ml (Im/Iv) [173] , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) [174] , Human Albumin Solution Ip 20% [175] , Rh-Erythropoetin Inj Ip 10000 Iu [176] , Rh-Erythropoetin Inj Ip 2000Iu [177] , Rh-Erythropoetin Inj 4000 Iu [179] , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. (Aqueous Solution) [180] , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion [405] , Factor Ix Concentrate ( Purified) Ip 500-600 I.U. (Human Coagulation Factor Ix) [406] , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial With 10 Ml Solvent) [407] , Hydroxyethyl Starch ( 130/0.4) 6 O/O W/V With Sodium Chloride 0.9 O/O W/V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion [416] , Tranexamic Acid Tablets Ip 500 Mg [545] , Warfarin Sodium. Tab Ip 5Mg [546] , Vitamin K-1 ( Phytomenadione) Ip 1Mg/0.5Ml Injection ( Detail In Rc) [644] , Dried Factor Viii Fraction Ip (Iv Use) 500 Iu/Vial [688] , Dried Factor Viii Fraction Ip (Iv Use) 1000 Iu/Vial [689] , Recombinant Coagulation Factor Viia 1Mg [690] , Recombinant Coagulation Factor Viia 2Mg [691] , Ethamsylate Tablet 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) [745] , Feracrylum 1% W/V Sterile Solution 100 Ml [746] , Tranexamic Acid Injection Ip 100Mg/Ml 5Ml Size [747] , Recombinant F Ix 500 Iu With Diluent [748] , 3Rd Generation Recombinant F Viii 250 Iu With Diluent [749] , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent [ 750] , Amiodarone Tab Ip 100 Mg [181] , Amiodarone Tab Ip 200 Mg [182] , Amiodarone Hydrochloride Inj 50 Mg /Ml [183] , Amlodipine Tab Ip 2.5 Mg [184] , Amlodipine Tablets Ip 5 Mg [185] , Atenolol Tab Ip 50 Mg [ 186] , Atorvastatin Tab Ip 10Mg [187] , Clopidogrel Tab Ip 75 Mg [188] , Digoxin Inj Ip 0.25 Mg/ Ml [189] , Digoxin Tab Ip 0.25 Mg. [190] , Diltiazem Tabs Ip 30 Mg Film Coated [191] , Dobutamine Inj Ip 50Mg/Ml/250Mg (Vial/) Dobutamine Inj Ip 250 Mg/5Ml(Amp) [192] , Dopamine Hydrochloride Inj Ip 40 Mg/Ml [193] , Enalapril Maleate Tab Ip 5Mg [194] , Enalapril Maleate Tab Ip 2.5Mg [195] , Isosorbide Dinitrate Tab Ip 5 Mg [197] , Isosorbide Mononitrate Tabs Ip 20 Mg [198] , Lisinopril Tab Ip 5 Mg [ 199] , Losartan Tab Ip 50 Mg [ 200] , Magnesium Sulphate Inj. Ip 500Mg/Ml (50%W/V) [201] , Methyldopa Tab Ip 250Mg Film Coated [ 202] , Nifedipine Cap Ip 5Mg [ 203] , Nifedipine Tablets Ip 10 Mg (Sustained Release) [204] , Nitroglycerin Inj 5 Mg/ Ml [205] , Propranolol Tab Ip 40 Mg [207] , Streptokinase Injection 15 Lac Units Ip [209] , Verapamil Tab Ip 40 Mg Film Coated [211] , Labetalol Tab Ip 100Mg [410] , Labetalol Hcl Inj Ip 20Mg/4Ml [411] , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg) [ 444] , Amlodipine And Enalapril Maleate Tablets (Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg) [457] , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg) [458] , Losartan Potassium And Hydrochlorothiazide Tablets Ip(Losartan Potassium 50 Mg, Hydochlorothiazide 12.5Mg) [459] , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril (Anhydrous) 5 Mg [460] , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg) [461] , Atenolol Tab Ip 25 Mg [ 462] , Enalapril Maleate Tablets Ip 10 Mg [463] , Lisinopril Tablets Ip 10 Mg [465] , Lisinopril Tab Ip 2.5 Mg [466] , Losartan Tab Ip 25 Mg [ 467] , Adenosine Injection Ip 6 Mg/2Ml [547] , Atorvastatin Tablets Ip 40 Mg [548] , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg [ 549] , Fenofibrate Capsules/ Tab Ip 200 Mg [550] , Isoprenaline Injection Ip 2Mg / Ml [551] , Metoprolol Tablets Ip 25 Mg [552] , Metoprolol Succinate Extended Release Tablets Ip 50 Mg [553] , Noradrenaline Injection Ip 2 Mg/Ml [554] , Prazosin Tablets ( Extended Release) 2.5 Mg [555] , Telmisartan Tablets Ip 40 Mg [556] , Urokinase Injection 5 Lac Unit (Lyophilized) [ 557] , Ramipril Tablets Ip 2.5 Mg [636] , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets [650] , Clonidine Hydrochloride Tablet Ip 0.1 Mg (Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg) [751] , Sotalol Hydrochloride Tablet Usp/Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp/Bp 40Mg) [752] , Esmolol Hydrochloride Injection 10Mg/Ml 10Ml Size [753] , Sodium Nitroprusside Injection 25Mg/Ml 2Ml Size [754] , Carvedilol Tablet 3.125 Mg [755] , Rosuvastatin Tablet Ip 20 Mg (Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg) [ 756] , Rosuvastatin Tablet 10 Mg [757] , Sacubitril 24 Mg And Valsartan 26 Mg Tablet [ 758] , Chlorhexidine Mouthwash Ip 0.2 O/O [ 580] , Dental Gel Choline Salicylate 8.7 O/O, Benzalkonium Chloride 0.01 O/O, Lignocaine Hcl 2 O/O (Flavoured Gel Base) [581] , Tooth Gel Sodium Monofluorophosphate 0.7 O/O And Potassium Nitrate 5 O/O (In Flavoured Base) [582] , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% [583] , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel [ 584] , Compound Benzoic Acid Ointment Ip Benzoicacid 6 O/O + Salicylic Acid 3 O/O [106] , Acyclovir Cream 5% [ 213] , Cetrimide Cream Ip 0.50 O/O [215A] , Fusidic Acid Cream Ip 2% [216A] , Glycerin Ip 400 Gm [217] , Liquid Paraffin Ip 400 Ml [218] , Miconazole Nitrate Cream Ip 2% [220] , Povidone Iodine Ointment 5% 15 Gm [221] , Neomycin Bacitracin And Sulphacetamide Powder (Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg) [ 223] , Silver Sulphadiazine Cream Ip 1% 50Gm Tube [224] , Gentian Violet Topical Solution Usp 1O/O [246] , Clotrimazole Mouth Paint (Clotrimazole 1 O/O W/V) [443] , Beclomethasone, Neomycin And Clotrimazole Cream (Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 %) [445] , Gamma Benzene Hexachloride Lotion 1% (Lindane Lotion Usp) [ 446] , Betamethasone Dipropionate Cream Ip 0.05% [558] , Betamethasone Lotion Ip 0.05 O/O [559] , Clindamycin Phosphate Gel Usp 1 O/O [560] , Clobetasol Propionate Cream Ip 0.05 O/O [561] , Glycerin Ip [564] , Ketoconazole Cream Bp 2% [565] , Permethrin Lotion 5% [ 568] , Permethrin Cream 5% [ 569] , Tretenoin Cream Usp 0.025% [570] , Coal Tar 6% & Salicylic Acid 3% Ointment [670] , Calamine Lotion Ip 100Ml [671] , Powder Clotrimazole 1 % W/W 30 Gm [759] , Terbinafine Cream 1%W/ W (10 Gm Tube) [760] , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W/V Ip (E/D) 5Ml Size [761] , Oitment Mupirocin Ip 2 % [762] , Anti Blood Grouping Serum/Reagent ( Combi Kit Of Anti A, B & D Monoclonal Serum/ Reagent) [802] , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% (Iodine Conc.= 292 Mg/Ml) [232] , Diatrizoate Meglumine And Diat Sod Inj Usp 76 %W/V (Iodine = 370 Mg/ Ml) [233] , Gadodiamide Inj. 0.5Mml/Ml Vial [235] , Vdrl Antigen (With + Ve And - Ve Control) / Rpr Slide Kit [242] , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine/Ml [482] , Iohexol Usp(Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml [672] , Multistix Test Strip [801] , Povidone Iodine Solution Ip 5 % 500 Ml [222] , Compound Benzoin Tincture Ip [244] , Formaldehyde Solution (34.5 Per. - 38 Per.) [245] , Gluteraldehyde Solution 2% [247] , Hydrogen Peroxide Solution Ip 6 O/O (20 Vol) [248] , Lysol (Cresol With Soap Solution) Ip (Cresol 50 O/O + Soap 50 O/O) [249] , Povidone Iodine Scrub Solution/Cleansing Solution 7.5 O/O W/V Povidone Iodine ( Suitable For Hand Wash) [ 250] , Surgical Spirit Ip (500 Ml) [252] , Chlorhexidine Gluconate Solution 5% 250 Ml [ 447] , Surgical Spirit Ip (100 Ml) [449] , Povidone Iodine Solution Ip 5% 100Ml Bottle [ 450] , Povidone Iodine Ointment Usp 5 O/O 250 Gm [571] , Povidone Iodine Solution Ip 10 % [572] , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar [573] , Acetazolamide Tab Ip 250Mg [253] , Frusemide Tab Ip 40 Mg [254] , Furosemide Injection Ip 10Mg/Ml (Im And Iv Use) [255] , Hydrochlorthiazide Tab Ip 12.5 Mg [256] , Mannitol Inj Ip 20% W/V [257A] , Spironolactone Tab Ip 25Mg [258] , Torsemide Tab 10 Ip Mg [259] , Hydrochlorthiazide Tab Ip 25Mg [464] , Spironolactone Tablets Ip 50 Mg [574] , Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp/ Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Eye Drops/Ear Drops [585] , Clotrimazole 1 O/O With Beclomethasone Dipropionate 0.025 O/O Ear Drops [586] , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp [588] , Ceruminolytic Drops (Wax Dissolving Ear Drops) Paradichlorobenzene 2 O/O , Benzocaine 2.7 O/O , Chlorbutol 5 O/O, Turpentine Oil 15 O/O [ 589] , Drotaverine Hydrochloride Inj 40 Mg/2 Ml [5] , Ointment Containing Lidocaine Ip 3 O/O Zinc Oxide Ip 5 O/O, Hydrocortisone Ip 0.25 O/O, Allantoin Ip 0.5 O/O [219] , Antacid Tablets.Formula,Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil [260A] , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg 100 Ml Pack [261A] , Bisacodyl Tab Ip 5 Mg [ 262] , Dicyclomine Tab Ip 10 Mg [263] , Dicyclomine Inj Ip 10 Mg /Ml [264] , Dicyclomine Hydrochloride Oral Solution Ip 10Mg /5Ml [ 265] , Domperidone Suspension Ip 5Mg/5Ml [266] , Domperidone Tab Ip 10 Mg [267] , Hyoscine Butylbromide Inj Ip 20 Mg/ Ml [268] , Loperamide Tab Ip 2 Mg [269] , Metoclopramide Inj Ip 10Mg/2Ml [270] , Metoclopramide Tab Ip 10 Mg [271] , Omeprazole Cap Ip 20 Mg [272] , Ondansetron Inj Ip 2Mg/ Ml [273] , Ors Powder Ip [274] , Pentoprazole Inj 40 Mg [275] , Ranitidine Hcl Injection Ip 50Mg/2Ml [ 276] , Ranitidine Tab Ip 150Mg Film Coated [ 277] , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O/O Disodium Hydrogen Phosphate Dodecahydrate 8 O/O [ 278] , Hyoscine Butyl Bromide Tablets Ip 10Mg [414] , Drotaverine Tab Ip 40 Mg [415] , Ranitidine Tab Ip 300Mg Film Coated [ 433] , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg [438] , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets [439A] , Metoclopramide Hydrochloride Syrup Ip 5 Mg/ 5Ml 30 Ml Pack [478] , Metoclopramide Hydrochloride Syrup Ip 5 Mg/ 5Ml 60 Ml Pack [478] , Domperidone Oral Drops Ip 10Mg/ Ml (10Ml) [590] , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg [591] , Lactic Acid Bacillus Tab 60 Million Spores [592] , Lactulose Solution Usp/ Bp 10Gm/15Ml Or 3.35 Gm/5Ml [593] , Liquid Paraffin Ip 100 Ml [594] , Ondansetron Orally Disintegrating Tablets Ip 4Mg [595] , Pantoprazole 40Mg And Domperidone 30Mg Special Repair Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Special Repair Pellets [596] , Ursodeoxycholic Acid Tablets Ip 300 Mg [597] , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg) [763] , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores) [765] , Mesalamine Tablet Ip 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Ip 1.2 Gm) [ 766] , Allopurinol Tablets Ip 100 Mg [598] , Hydroxychloroquine Sulphate Tablets Ip 200Mg [599] , Leflunomide Tablets Ip 10Mg(Film Coated) [600] , Leflunomide Tablets Ip 20Mg (Film Coated) [601] , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip [602] , Biphasic Isophane Insulin Inj Ip (30 % Soluble Insulin And 70 % Isophane Insulin) Inj. 40 Iu/Ml(R-Dna Origin) [ 279] , Carbimazole Tabs Ip 5 Mg [280] , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg/Ml [ 281] , Clomifene Tab Ip 25 Mg [282] , Clomiphene Tab Ip 50 Mg [283] , Conjugated Estrogen Tabs Usp 0.625 Mg. [ 284] , Dinoprostone Cream/ Gel 0.5 Mg Dinoprostone In Syringe [285] , Ethinyloestradiol Tabs Ip 50 Mcg [286] , Glibenclamide Tab Ip 5 Mg [287] , Gliclazide Tab Ip 40 Mg [288] , Glimepiride Tab Ip 2 Mg [289] , Glimepiride Tab Ip 1Mg [290] , Glipizide Tab Ip 5Mg [ 291] , Hydroxyprogesterone Inj Ip 250Mg /Ml [293] , Isophane Insulin Inj Ip 40 Iu /Ml [294] , Metformin Tab Ip 500 Mg [295] , Norethisterone Tab Ip 5 Mg [296] , Pioglitazone Tab Ip 15 Mg [297] , Progesterone Inj Ip 200 Mg/ 2Ml [298] , Insulin Injection Ip (Soluble Insulin/Neutral Insulin Injection)40 Iu/ Ml(R.Dna Origin) [300] , Thyroxine Sodium Tablets Ip 100Mcg [301] , Metformin Hydrochloride(Sustained Release Tablets Ip 1000 Mg [451] , Glipizide And Metformin Hydrochloride Tablets Usp (Glipizide 5 Mg, Metformin Hydrochloride 500 Mg) [ 452] , Glibenclamide And Metformin Hydrochloride (Sr) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release) [453] , Metformin Hcl (Sustained Release) And Glimepiride Tab Metformin Hcl (Sustained Release) 500Mg ,Glimepiride 1Mg [454] , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablets Ip (Metformin Hydrochloride(Sustained Release) 500 Mg, Glimipiride 2Mg) [455] , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sustained Release) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride (Sustained Release) 500 Mg [456] , Gliclazide And Metformin Tablets (Gliclazide 80 Mg And Metformin Hcl 500 Mg) [603] , Glucagon For Injection Usp 1 Mg [604] , Medroxyprogesterone Acetate Tablets Ip 10 Mg [605] , Thyroxine Tablets Ip 50 Mcg [607] , Octreotide Injection 50 Mcg/Ml [608] , Insulin Glargine 3Ml (100Iu/Ml) With 15 Insulin Syringes And Needles/Cartridge 3Ml ( 100Iu/Ml) With 15 Needles And 1 Pen Per 20 Cartridges [680] , Tenaligliptin Tablet Ip 20Mg [682] , Insulin Glargine 10 Ml Vial (100 Iu/Ml) With 30 Insuline Syringes With Needle [693] , Human Anti D Immunoglobulin Injection 300Mcg (Im Use) [303] , Human Anti D Immunoglobulin 150 Mcg [304] , Human Rabies Immunoglobulin Inj 150 Iu/ Ml [305] , Rabies Vaccine Human (Cell Culture) Ip (Intradermal) 2.5 Iu [ 306] , Rabies Vaccine Human (Cell Culture) Ip (Intramuscular) 2.5 Iu/Dose [307] , Snake Venum Anti Serum Ip (Lyophilized) Polyvalent Anti Snake Venum, Serum Enzyme Refined. Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum,0.45 Mg Of Common Kraite( Bungaras)Venum(Details In Rc) [308] , Tetanus Immunoglobulin Ip 250 Iu/ Vial[309] , Tetanus Vaccine ( Adsorbed) Ip 5 Ml Vial [ 310] , Rabies Antiserum Ip ( Equine) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments (I.M./Sc Use) [408] , Diphtheria Antitoxin 10000 Iu [480] , Hepatitis B Immunologlobin Injection Ip 200 I.U [767] , Human Immunoglobulin Inj With 12%Igm,12% Iga, 76%Igg In Pack Of 10Ml (0.5Gm) [798] , Atracurium Inj 10 Mg/Ml [311] , Glycopyrrolate Inj Ip 0.2 Mg/Ml [312] , Midazolam Inj Ip 1 Mg/ Ml [313] , Neostigmine Inj Ip 0.5 Mg/Ml [314] , Succinylcholine Inj. Ip 50 Mg/Ml (Iv Use) [317] , Valethamate Bromide Inj 8Mg / Ml [318] , Vecuronium Bromide For Injection 4Mg (Freeze Dried) [419] , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets (Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg) [610] , Neostigmine Injection Ip 2.5Mg/5Ml [638] , Cis Atracurium Besylate Injection 2 Mg/Ml In 5Ml Vial [768] , Tropicamide Eye Drop Ip 1O/O [241] , Atropine Eye Ointment Ip 1% [319] , Atropine Sulphate Ophthalmic Solution Usp 1% [320] , Chloramphenicol Eye Drops Ip 0.5 0/0 [321] , Ciprofloxacin Eye Drops Ip 0.3 O/O W/V / Ciprofloxacin Eye/Ear Drops Ip 0.3 O/O W/V [ 322] , Ciprofloxacin Ophthalmic Ointment Usp 0.3% [323] , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml [324] , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O/O +0.1 O/O [330] , Tobramycin Eye Drops 0.3% [331] , Tobramycin Ophthalmic Ointment Usp 0.3% [ 332] , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O/O W/V [421] , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. [423] , Lidocaine Hcl Topical Solution Usp 4% [424] , Fluconazole Eye/Ear Drops 0.3% [425] , Timolol Eye Drops Ip 0.5 O/O W/V [484] , Homatropine Eye Drops Ip 2% [485] , Travoprost Eye Drops Ip 0.004 O/O [486] , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% [487] , Betaxolol Eye Drops 0.5 O/O [612] , Carboxymethylcellulose Eye Drops Ip 0.5% [613] , Acyclovir Eye Ointment Ip 3% W/W 5Gm Size [ 769] , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip 5Ml Size [ 770] , Chloramphenicol 1% W/ W Eye Ointment Ip, 3Gm Size [771] , Isoxsuprine Inj Ip 5 Mg/ Ml [333] , Isoxsuprine Tab Ip 20 Mg [334] , Methylergometrine Inj Ip 0.2 Mg/Ml [335] , Methylergometrine Tab Ip 0.125 Mg [336] , Misoprostol Tab Ip 200 Mcg [337] , Oxytocin Inj Ip 5 Iu/Ml [338] , Mifepristone Tab Ip 200Mg [615] , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg (Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg)/Natural Micronised Progesteron Tablet 200 Mg (Each Tablet Contains Progesteron Ip 200 Mg) [772] , Cabergoline Tablet Ip 0.5Mg (Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg) [ 773] , Human Chorionic Gonadotropin Injection Ip 5000 I.U. [774] , Leurprolide Acetate Depot 3.75 Mg [775] , Leurprolide Acetate Depot 11.25 Mg [776] , Alprazolam Tab Ip 0.25 Mg [339] , Alprazolam Tab Ip 0.5Mg [340] , Amitriptyline Tab Ip 25Mg Film Coated [341] , Chlordiazepoxide Tablets Ip 10Mg [342] , Chlorpromazine Tablets Ip 100 Mg (Coated Tablet) [343] , Chlorpromazine Tablets Ip 25 Mg [344] , Chlorpromazine Tablets Ip 50 Mg (Coated Tablets) [345] , Diazepam Inj Ip 10Mg/ 2Ml (1M/Iv Use) [349] , Diazepam Tab Ip 5 Mg [350] , Escitalopram Tab Ip 10 Mg [351] , Fluoxetine Cap/Tab Ip 20Mg [352] , Haloperidol Inj Ip 5 Mg/ Ml [353] , Haloperidol Tab Ip 1.5 Mg [354] , Haloperidol Tab Ip 5 Mg [355] , Imipramine Tab Ip 25 Mg (Coated Tab) [356] , Imipramine Tab Ip 75 Mg (Coated) [357] , Lithium Carbonate Tab Ip 300 Mg [358] , Lorazepam Inj Ip 2 Mg/ Ml [359] , Olanzapine Tab Ip 5 Mg [360] , Risperidone Tab 2Mg [ 361] , Risperidone Tab 1 Mg [ 362] , Sertraline Tab Ip 50 Mg [363] , Trifluperazine Tab Ip 5 Mg Coated [364] , Quetiapine Tablet Ip 50Mg [674] , Quetiapine Tablet Ip 25Mg [675] , Clonazepam Tablet 0.5 Mg [678] , Levosulpiride Tablet 25 Mg (Each Uncoated Tablet Contains Levosulpiride 25 Mg) [ 777] , Lorazepam Tablet Ip 2 Mg (Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) [ 778] , Zolpidem Tablet 5 Mg [ 779] , Aminophylline Inj Ip 25 Mg/Ml [365] , Beclomethasone Inhalation Ip 200 Mcg/ Dose [366] , Budesonide Nebulizer Suspension 0.25Mg/Ml [ 367] , Ipratropium Bromide Nebulizer Solution 250 Mcg/ Ml [369] , Salbutamol Tablet Ip 4 Mg [370] , Salbutamol Inhalation 100 Mcg /Dose [371] , Salbutamol Nebuliser Solution Bp 5 Mg/Ml [ 372] , Salbutamol Tab Ip 2 Mg [373] , Theophylline And Etofylline Injection (Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg) [374] , Theophylline And Etofylline Tablets Ip ( Theophylline Ip 23Mg + Etofylline Ip 77 Mg) [ 375] , Theophylline Tablet 400Mg Sustained Release/ Controlled Release (Theophylline Prolonged Released Tablet Ip) [376] , Salbutamol Syrup Ip 2Mg/5Ml 100 Ml Pack [432] , Saline Nasal Solution ( Drops) (Sodium Chloride 0.65 O/O) [442] , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [616] , Budesonide Powder For Inhalation Ip 200 Mcg [ 617] , Ipratropium Powder For Inhalation Ip 40 Mcg [618] , Terbutaline Tablets Ip 2.5 Mg [619] , Xylometazoline Nasal Drops Ip 0.1% [620] , Cough Syrup/ Expectorant (100) Ml (Detail In Rc) [692] , Acebrophylline Tablet/ Capsule 100 Mg [780] , Compound Sodium Lactate Inj. Ip [377] , Dextrose Inj Ip 25% W/ V [378] , Dextrose Inj Ip 10% [ 379] , Dextrose Inj Ip 5% [380] , Multiple Electrolytes And Dextrose Injection Type I Ip (Electrolyte P Injection ) [381] , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection (I.V.) [382] , Potassium Chloride Inj. Ip 0.15 Gm/Ml [383] , Potassium Chloride Oral Solution U.S.P 500Mg/ 5Ml [384] , Sodium Chloride And Dextrose Injection Ip 0.9 O/O + 5 O/O [385] , Sodium Chloride Inj Ip 500 Ml [386] , Sodium Chloride Injection Ip 100 Ml [621] , Ringer Acetate Infusion 500 Ml [781] , Sodium Chloride 0.45% W/V Polypack 500 Ml [782] , Finasteride Tablets Ip 5 Mg [575] , Tamsulosin Hcl Tablets/ Capsule 0.4 Mg [576] , Flavoxate Tablets Ip 200 Mg (Coated Tablet) [579] , Savelamer Carbonate Tablet 400 Mg (Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg) [783] , Sodium Bicarbonate Tablet Usp 1 Gm (Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm) [784] , Levamisol Hydrochloride Tablet Ip 50 Mg (Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg)[785] , Dutasteride Tablet 0.5 Mg [787] , Alkylizer 1.4Gm To 1.53 Gm Per 5 Ml(Disodium Hydrogen Citrate) Syrup/Solution [788] , Betahistine Tab Ip 8 Mg [541] , Betahistine Tab Ip 16 Mg [542] , Cinnarizine Tablets Ip 25 Mg [543] , Cinnarizine Tablet Ip 75 Mg [544] , Ascorbic Acid Tab Ip 500 Mg [387] , Calcium Gluconate Inj Ip 10% (Iv Use) [388] , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg [390] , Ferrous Sulphate With Folic Acid Tab ( Paediatric) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg [391] , Folic Acid Tab Ip 5 Mg [392] , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg [393] , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg [394] , Vitamin B Complex Inj Nfi [395] , Vitamin B Complex Tablet Nfi (Prophylactic) B1 2Mg B2-2Mg B6-0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg (With Appropriate Overages) [ 397] , Vitamin A Paediatric Oral Solution Ip( Vitamin A Concentrate Oil Ip)Each Ml Contains Vitamin A 100000 Iu [ 409] , Calcium And Vitamin D3 Suspension (Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu) [441] , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg [448] , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg [ 472] , Iron Sucrose Injection Usp/Bp 20Mg/Ml (For Iv Use) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg [ 488] , Calcium With Vitamin D Tablets Usp /Calcium And Colecalciferol Tablets Bp/Calcium And Vitamin D3 Tablets Ip( Elemental Calcium 500 Mg, Vitamin D3-250 Iu) (Non-Chewable) [622] , Cholecalciferol Granules 60000 Iu /Gm Or Soft Gelatin Capsule/Tablet 60000 Iu/Capsule / Tablet [623] , Mecobalamin Inj 500 Mcg/Ml [624] , Pyridoxine Tablet Ip 40Mg [627] , Thiamine Tablets Ip 100 Mg [629] , Calcitriol Capsules Ip 0.25 Mcg [630] , Methyl Cobalmine Tablet 500Mcg [652] , Methyl Cobalmine Tablet 1500Mcg [653] , Vitamin D3 Oral Solution 60000 Iu [676] , Ferric Carboxymaltose Injection 50 Mg/Ml 10 Ml Size [789] , Multi Vitamin Syrup [ 790] , Flunarizine Tab 5 Mg [ 147] , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii [ 398] , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can [399] , Peritonial Dialysis Solution Ip [401] , Sodium Bicarbonate Inj Ip 7.5% W/V [402] , Water For Inj Ip [404] , Alendronate Sodium Tablets Usp / Bp 35 Mg [631] , Mannitol With Glycerin Injection 10 O/O + 10 O/O W/V (For Intravenous Infusion) [632] , Normal Human Intravenous Immunoglobulin 5G/ 100Ml [633] , Pregabalin Cap Ip 75 Mg [634] , Surfactant For Intratrecheal Instillation (Natural Bovine Lung Surfactant) [635] , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans [687] , Intravenous Fat Emulsion 20% W/V 250Ml [791] , Pyridostigmine Tablet Ip 60 Mg (Each Tablet Contains Pyridostigmine Ip 60 Mg ) [792] , Caffeine Citrate Usp Injection 20Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) 3Ml Size [793] , Amino Acid 10% Injection 100Ml Size [ 794] , Vitamin E Soft Gelatin Capsule 400 Mg [795] , Inj Poractant Alpha 80 Mg/Ml In Pack Of 1.5 Ml (Detail In Rc) [796] , Oseltamivir Capsule Ip 75 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg) [639] , Oseltamivir Capsule Ip 45 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg) [640] , Oseltamivir Capsule Ip 30 Mg (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg) [641] , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) 100 Ml Pack [642] , Act Kit Containing 3 Tablets Of Artesunate( 25Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(250Mg+ 12.5Mg) [645] , Act Kit Containing 3 Tablets Of Artesunate(50 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+ 25Mg) [646] , Act Kit Containing 3 Tablets Of Artesunate( 100 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine( 750Mg+37.5Mg) [647] , Act Kit Containing 3 Tablets Of Artesunate( 150 Mg Each) And 2 Tablet Of Sulphadoxine And Pyrimethamine( 500Mg+25Mg) [648] , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate(200 Mg Each) And 2 Tablet Of Sulphadoxine Pyrimethamine(750Mg+ 37.5Mg)Each Or 3 Tablets Of Sulphadoxine Pyrimethamine(500+25) Mg [649] , Liposomol Amphotericine Injection B 50Mg [800] , Racecadotril 100Mg Cap. Ip [Nrd-5] , Acitretin 10 Mg Cap. Ip [Nrd-7] , Acitretin 25 Mg Cap. Ip [Nrd-8] , Alectinib 150 Mg Cap. [ Nrd-9] , Anti Oxidants (Beta Carotene 10 Mg,Vit E 25Mg,Vit C 100 Mg, Copper 1.5 Mg, Managanese 1.5 Mg, Zinc 7.5 Mg, Selenium 150 Microgram) Cap. [ Nrd-11] , Aprepitant 125 / 80 Mg Capsule / Tablet Kit ( Each Kit Contains 1 Capsule / Tablet Of 125 Mg And 2 Capsule / Tablet Of 80Mg) [Nrd-12] , Calcium Dobesilate 500Mg Cap. [Nrd-14] , Ceritinib Capsule 150Mg [Nrd-18] , Clomipramine Ip 25 Mg Capsule / Tablet Ip [ Nrd-19] , Cyclosporine 100 Mg Cap. Ip [Nrd-20] , Dacarbazine 200 Mg Inj. Usp [Nrd-21] , Danazol 100Mg Cap. Ip [Nrd-22] , Formetrol 12Mcg And Budesonide 400 Mcg. Powder For Inhalation [ Nrd-24] , Indacaterol And Glycopyronium Inhalation Powder 110/ 50 Mcg Cap. [Nrd-25] , Isotretinoin 10Mg Cap. Ip [Nrd-26] , Isotretinoin 20 Mg Cap. Ip [Nrd-27] , Minocycline 100Mg. Capsule / Tablet [Nrd-29] , Mycophenolate Mofetil 500Mg Capsule / Tablet [Nrd-30] , Ramipril Ip 5 Mg Capsule / Tablet Ip [ Nrd-32] , Rucaparib 200 Mg Tab [ Nrd-33] , Rucaparib 300 Mg Tab [ Nrd-34] , Silodosin 4 Mg Tablet / Capsule [Nrd-35] , Silodosin 8 Mg Tablet / Capsule [Nrd-36] , Temozolamide 250 Mg Cap. Ip [Nrd-37] , Vitamin A 25000 Iu Cap. Ip [Nrd-38] , Amorolfine 0.25% Cream [Nrd-46] , Azelaic Acid 20% Cream [Nrd-47] , Benzoyl Peroxide Gel 2.5 % Ip [Nrd-48] , Desonide 0.05% Cream [Nrd-49] , Glycolic Acid 6% Cream [Nrd-51] , Hydrocortisone 1% Cream Ip [Nrd-52] , Hydroquinone 2% Cream Usp [Nrd-53] , Luliconazole 1% Cream Ip [Nrd-55] , Mometasone 0.1 % Cream Ip [Nrd-56] , Neomycin Sulphate 0.5 % Cream [Nrd-58] , Adaplene (0.1% W/W) Gel [Nrd-60] , Desflurane, Usp, 100 O/O Desflurane. Liquid For Inhalation [Nrd-61] , Salmetrol 50Mcg And Fluticasone 500 Mcg Dpi Ip [Nrd-65] , Budesonide 400 Mcg Dpi Ip [Nrd-66] , Levosalbutamol 100Mcg And Ipratropium Bromide 40Mcg Dpi [ Nrd-70] , Diastase, Pepsin With Simethicone 15Ml Drop Each Ml Contains Diastase (1:1200) 33.33Mg, Pepsin (1:3000) 5Mg And Simethicone Emulsion 40Mg [Nrd-71] , Hydroxyzine Hydrochloride Oral Solution / Drop 6Mg/Ml 30 Ml Pack [Nrd-76] , Hydroxyzine Hydrochloride Oral Solution / Drop 6Mg/Ml 60 Ml Pack [Nrd-76] , Ambroxol Drop 7.5Mg/ Ml 15Ml [Nrd-77] , Anticold Drop (Each Ml Contains Paracetamol 125Mg, Chlorpheniramine Maleate 1Mg And Phenylepherine Hydrochloride 2.5 Mg) 15 Ml [Nrd-78] , Ferrous Ascorbate And Folic Acid Drops 15Ml (Each Ml Contains Ferrous Ascorbate 10Mg And Folic Acid 100Mcg) [Nrd-81] , Vitamin ? E 50Mg/Ml Drops 15Ml [Nrd-83] , Vitamin D3 400Iu/Ml Drop [Nrd-84] , Vitamin D3 800Iu/Ml Drop [Nrd-85] , Lactulose Enema 20% [ Nrd-87] , Natamycin Opthalmic Suspension 5% Eye Drop Ip [Nrd-94] , Olapatadine 0.1% And Ketorolac 0.4% Ophthalmic Solution [ Nrd-95] , Brinozolamide 1% W/V And Brimonidine Tartrate 0.2% W/V Ophthalmic Suspension [Nrd-98] , Cyclopentolate 1% Eye Drop Ip [Nrd-100] , Dorzolamide 2% Eye Drop Ip [Nrd-101] , Fluromethalone 0.1% Eye Drop [Nrd-102] , Gatifloxacin 0.30% And Prednisolone Acetate 1% Ophthalmic Suspension /Solution/ Eye Drop [Nrd-103] , Hpmc 0.3% Eye Drop [ Nrd-104] , Itraconazole 1% Eye Drop [Nrd-105] , Moxifloxacin 0.5% And Ketorolac Tromethamine 0.5% Eye Drop [Nrd-107] , Moxifloxacin 0.5% And Dexamethasone 0.1% Eye Drops [Nrd-108] , Moxifloxacin 0.5% And Prednisolone 1% Ophthalmic Suspension / Solution/ Eye Drop [ Nrd-109] , Nepafenac 0.1% Eye Drop [Nrd-110] , Proparacaine 0.5% W/V Eye Drop Usp [Nrd-114] , Sodium Chloride 5 % Eye Drop Bp [Nrd-115] , Travapost 0.004% And Timolol 0.5% Eye Drops Ip [Nrd-117] , Tropicamide 0.8% W/V And Phenylphrine Hcl 5 % W/V Eye Drop [Nrd-118] , Voriconazole 1 % W/V ( Lyophilized) 30Mg Eye Drop [Nrd-119] , Azithromycin 1% Eye Ointment [Nrd-120] , Chloramphenicol 1%, Polymyxin B Sulphate ( 10000 Units) And Dexamethasone 0.1% Sodium Phosphate Eye Ointment [Nrd-123] , Itraconazole 1% Eye Ointment [Nrd-125] , Moxifloxacin 0.5% Eye Ointment [Nrd-126] , Sodium Chloride 6% Eye Ointment Usp [ Nrd-127] , Povidone Iodine Gargle 0.5% W/V [Nrd-128] , Gatifloxacin 0.3% Eye Drop [Nrd-129] , Metoprolol 1Mg/Ml Inj. [ Nrd-141] , Docetaxel Injection 80 Mg/4Ml [Nrd-143] , Sodium Chloride 3% 100Ml Inj. Ip [Nrd-145] , Adalimumab 40 Mg Inj. [Nrd-147] , Prostaglandin 500Mcg/ Ml Inj. 1 Ml Vial [Nrd-151] , Progesterone Injection 50 Mg Inj. Bp [Nrd- 155] , Artesunate Injection 120 Mg Each Combo Pack Contains Artesunate Inj 120Mg Vial, Sodium Bicarbonate Inj Ip 5% ( 2Ml Amp), Sodium Chloride Inj Ip 0.9%( 10Ml Amp) [Nrd-156] , Avelumab 200 Mg Inj. [ Nrd-158] , Azacitidine 100Mg Inj. [ Nrd-160] , Azithromycin 10 Ml Vial Equaivelent To 500 Mg Inj. [Nrd-161] , Bortezomib 2.5Mg Inj. [ Nrd-163] , Botulinum Toxin Type A For Injection 100 Iu [ Nrd-164] , Botulinum Toxin Type A For Injection 50 Iu [ Nrd-165] , Cabazitaxel Injection 60 Mg [Nrd-167] , Inj.Caffeine Cirate 20Mg/Ml [Nrd-169] , Hepato Protective Tablet Each Film Coated Tablet To Contain: Matadoxine 500Mg, Silymarin 140Mg, L-Ornithine L-Aspartate 150Mg, Pyridoxine Hydrochloride 3Mg, Folic Acid 1.5Mg [Nrd-171] , Carfilzomib 60 Mg Inj. [ Nrd-174] , Carmustine 100 Mg Inj.Ip [Nrd-175] , Caspofungin 50 Mg Inj. [ Nrd-176] , Caspofungin 70 Mg Inj. [ Nrd-177] , Cefipime 1000Mg And Tazobactum 125Mg Inj. [Nrd-178] , Cefoperazone 1Gm And Tazobactum 125Mg Inj. [Nrd-179] , Cefoperazone 500Mg Inj. Ip [Nrd-180] , Ceftazidime 1Gm And Sulbactam500 Mg Inj. [ Nrd-181] , Ceftazidime 2Gm And Avibactum 500Mg Inj. [ Nrd-182] , Ceftriaxone Ip 125 Mg Inj. Ip [Nrd-184] , Ceftriaxone 1000Mg And Salbactum 500Mg And Disodium Edetate 37Mg Inj [Nrd-185] , Ceftriaxone 1000Mg And Sulbactam 500Mg Injection (Detail In Rc) [Nrd-186] , Cefuroxime 750Mg Injection [Nrd-188] , Cetrorelix Acetate 0.25 Mg Inj. [Nrd-189] , Cetuximab 100 Mg Inj. [ Nrd-190] , Cetuximab 500Mg Inj. [ Nrd-191] , Cladrabine 10 Mg Inj. [ Nrd-193] , Clarithromycin 500Mg Inj. Bp [Nrd-194] , Clindamycin 600Mg/4Ml Inj. Ip In 4 Ml Vial [ Nrd-195] , Cytarabine 1000 Mg Inj.Ip [Nrd-199] , Daratumumab 100 Mg Inj. [Nrd-202] , Daratumumab400 Mg Inj. [Nrd-203] , Darbepoietin Alfa 100Mcg Inj. [Nrd-204] , Darbepoietin Alfa 200 Mcg Inj. [Nrd-205] , Darbepoietin Alfa 500Mcg Inj. [Nrd-206] , Decitabine 50 Mg Inj. [ Nrd-207] , Degarelix 80 Mg Inj. [ Nrd-209] , Degarelix 120 Mg Inj. [ Nrd-210] , Degludec Insulin 100Iu/ Ml Injection 3Ml [Nrd-211] , Denosumab 120 Mg Inj. [Nrd-212] , Detemir Insuline 100Iu/ Ml Injection 3Ml [Nrd-214] , Docetaxel 120 Mg Inj. Ip [Nrd-220] , Doxycycline For Injection 100 Mg Inj. Usp [Nrd-221] , Durvalumab 120 Mg Inj. [Nrd-222] , Durvalumab 500Mg Inj. [Nrd-223] , Enalaprilat Injection1.25Mg/Ml In 1Ml Ampoule [Nrd-224] , Ephedrine 30 Mg/Ml Inj. Bp In 1Ml Ampoule [Nrd-225] , Eribulin 0.5Mg Inj. [ Nrd-228] , Eribulin 1 Mg Inj. [Nrd-229] , Ertapenem Sodium 1.046 Gm Equivalent To Ertapenem 1Gm Inj. [Nrd-230] , Fentanyl Transdermal Patch 25 Mcg/Hour [ Nrd-233] , Fentanyl Transdermal Patch 50Mcg/Hour [Nrd-234] , Fluconazole 200 Mg Inj. [Nrd-236] , Fludarabine Phosphate Injection 100Mg Inj. Ip [ Nrd-237] , Fludarabine Phosphate Injection 50Mg Inj. Ip [ Nrd-238] , Folic Acid Cynocobalamine And Nicotinamide Injection ( Each Ml Contains Folic Acid 200 Mcg Cynocobalamine 5 Mcg And Nicotinamide 20 Mg [Nrd-241] , Fondaparinux 2.5Mg Inj.Usp [Nrd-242] , Fsh 75 Iu Inj. [Nrd-244] , Fulvestrant 250Mg Inj. [ Nrd-246] , Telmisartan40mg And Hydroclorothiazide12.5 Mg, I.P. Each Tablet Contain Telmisartan40mg And Hydroclorithiazide12.5 Mg, [Nrd-247] , Goserelin Acetate Implant 3.6 Mg Inj. Bp [ Nrd-249] , Haloperidol (Long Acting) 50Mg/Ml Ampoule Inj. Ip 1Ml Vial/Ampoule [Nrd-251] , Horse Atg(Anti Thymocyte Globulin) 250 Mg Inj. [Nrd-252] , Hp Hmg (Highly Human Menopausal Parodied Gonadotropin) 150 Iu Inj. Ip [Nrd-253] , Hydralazine 20Mg/Ml Inj. Ip 1Ml Vial/Ampoule [Nrd-255] , Insulin Aspart 100Iu/Ml Injection 3 Ml [Nrd-258] , Mefenamic Acid 250Mg And Dicyclomine Hydrochloride10mg Each Tablet Contain Mefenamic Acid 250Mg And Dicyclomine Hydrochloride10mg [ Nrd-259] , Insulin Glulisine ( Monocomponent Insulin Glulisine) 100 Iu/Ml Injection 3 Ml [Nrd-260] , Insulin Lispro Injection [ Nrd-261] , Interferon Beta 1 A Injection 30Mcg [Nrd-262] , Invert Sugar Injection Ip 10% W/V [Nrd-264] , Irinotecan Injection 40Mg/2Ml 2 Ml Vial [Nrd-267] , Irinotecan Injection 100Mg/5Ml 5 Ml Vial [Nrd-268] , Combikit Of (Tab Fluconazole150mg And Azithromycin 1Gm And Secnidazole1gm) Each Kit Contain 1Tab Fluconazole150mg And 1 Tab.Azithromycin 1Gm And 2 Tab.Secnidazole 1Gm. [ Nrd-270] , Lacosamide Infusion 200Mg [Nrd-271] , Levofloxacine 500Mg/ 100 Ml Inj. Ip 100Ml Infusion [Nrd-273] , Levosulpride 12.5 Mg/ Ml Injection 2Ml [Nrd-274] , Lignocaine (Preservative Free) 2% Injection [ Nrd-275] , Lignocaine Hydrochloride 2% 50Ml Vial Inj. Ip [Nrd-278] , Liposomal Doxorubicin Hydrochloride 20Mg/ 10Ml Injection 10Ml Vial/Ampoule [Nrd-279] , Liposomal Doxorubicin Hydrochloride 50Mg/ 25Ml Injection 25Ml Vial/Ampoule [Nrd-280] , Enoxaparin Sodium Injection (Low Molecular Wt. Heparin) 40Mg/0.4Ml 0.4Ml Injection [Nrd-284] , Mephentermine 30Mg/ Ml Injection 10Ml Vial [ Nrd-285] , Mesna 200 Mg/2Ml (Sod. Mercaptoethane Sulphate) Inj. 2 Ml Ampoule [Nrd-287] , Methotrexate 250 Mg Inj. Ip [Nrd-288] , Methotrexate 1000 Mg Inj. Ip [Nrd-289] , Methylprednisolon Acetate 40Mg Inj. Ip [ Nrd-291] , Methylprednisolon Acetate 125Mg Injection [Nrd-292] , Methotrexate 15Mg/Ml Inj. In 1Ml Vial [Nrd-293] , Midazolam 5Mg/Ml Injection 10 Ml Vial [ Nrd-294] , Mitomycin 2 Mg Inj. Ip [ Nrd-296] , Mitomycin 40 Mg Inj. Ip [Nrd-297] , Moxifloxin 400Mg/ 100Ml Inj. [Nrd-301] , Nabpaclitaxel / Paclitaxel Nano Particle Injection 100 Mg [Nrd-303] , Nandrolone Decanoate 100Mg Inj. Ip [Nrd-304] , Nandrolone Decanoate 50 Mg Inj. Ip [Nrd-305] , Natalizumab 300 Mg Inj. [Nrd-306] , Netilmycin 300Mg/3Ml Inj. Ip 3Ml Vial/Ampoule [Nrd-308] , Nimodipine Infusion 10Mg/50 Ml Inj. Bp 50Ml [Nrd-311] , Nimotuzumab 50 Mg Inj. [Nrd-312] , Sodium Chloride 0.9 O/O 500 Ml Glass Bottle Injection Ip [Nrd-315] , Normal Saline 1000 Ml Glass Bottle Injection [ Nrd-316] , Octreotide-Lar (Long Acting Release/Depot) 30 Mg Inj [Nrd-319] , Omalizumab 150 Mg Vial Inj. [Nrd-321] , Ornidazole 500Mg Inj.Ip [Nrd-322] , Palonosetron 0.25Mg Inj. [Nrd-323] , Paracetamol Infusion 500 Mg With Both Temper Evident Caps Spray 10% Injection [ Nrd-324] , Peg Asparaginase 3750 Iu 5 Ml Inj. [Nrd-326] , Peg Filgrastim Injection 6Mg Inj. [Nrd-327] , Pemetrexed 100Mg Inj.Ip [Nrd-330] , Pemetrexed 500 Mg Inj.Ip [Nrd-331] , Phenylephrine Hydrochloride 10 Mg/Ml Inj. Bp/Ip 1Ml Vial [ Nrd-333] , Piperacillin 1 Gm And Tazobactum 125 Mg Inj. Ip [Nrd-335] , Piracetam 200Mg Inj. [ Nrd-336] , Plerixafor 24 Mg Inj. [ Nrd-338] , Ranibizumab Injection (10Mg/Ml) 2.3Mg/0.23Ml Per Vial [Nrd-346] , Rasburicase 1.5 Mg Inj. [ Nrd-347] , Recombinant Fsh 150 Iu Inj. [Nrd-348] , Recombinant Fsh 300Iu Inj. [Nrd-349] , Recombinant Lh 75Iu Inj. [Nrd-351] , Reteplase 18 Mg Inj. [ Nrd-352] , Risperidone Prolonged Released Depot/ Suspension 25 Mg Injection [Nrd-353] , Risperidone Prolonged Released Depot/ Suspension 50 Mg Injection [Nrd-354] , Rituximab 100 Mg Inj. [ Nrd-355] , Rituximab 500 Mg Inj. [ Nrd-356] , Rocuronium 100Mg/ 10Ml Inj. In 10 Ml Vial [ Nrd-357] , Romiplostim 250 Mcg Inj. [Nrd-359] , Romiplostim 500 Mcg Inj. [Nrd-360] , Ropivacaine 0.75% 20Ml Vial Inj. Ip [Nrd-361] , Ropivacaine 0.75% 3 Ml Ampule (Heavy) Injection [Nrd-362] , Secukinumab 150 Mg Inj. [Nrd-363] , Sildenafil Injection 0.8Mg [Nrd-364] , Streptomycin 500Mg Injection [Nrd-369] , Teicoplanin 200 Mg Inj.Ip [Nrd-371] , Teicoplanin 400 Mg Inj.Ip [Nrd-372] , Tenecteplase 20Mg Inj. [ Nrd-373] , Tenecteplase 40 Mg Inj. [Nrd-374] , Tigecycline For Injection 50Mg Inj. Usp [Nrd-379] , Tobaramycin 80Mg Inj.Ip [Nrd-381] , Topotecan 2.5 Mg Inj. Ip [Nrd-383] , Topotecan 4 Mg Inj. Ip [ Nrd-384] , T Pa 20Mg Alteplase For Injection [Nrd-385] , T Pa 50Mg Alteplase For Injection [Nrd-386] , Trabectedin 1 Mg Inj. [Nrd-387] , Dolutegravir 50, Each Film Coated Tablet Contain Dolutegravir Sodium 50 Mg [Nrd-388] , Trastuzumab 440 Mg Inj. [Nrd-389] , Trastuzumab150mg Inj. [Nrd-390] , Trypan Blue 0.06% W/V Injection [Nrd-393] , Triptorelin 3.75 Mg Inj. [ Nrd-395] , Triptorelin 11.25 Mg Inj. [Nrd-396] , Vinorelbine 10Mg Inj. Ip [Nrd-400] , Vinorelbine 50Mg Inj. Ip [Nrd-401] , Vitamin D3 (600000 Iu) Inj. Ip [Nrd-402] , Insulin Glargine 300 Iu Per Ml Inj. Ip 1 Prefilled Pen Of 1.5Ml [Nrd-403] , L-Ornithine L-Aspartate (150Mg) And Pancreatin (100Mg) Capsule / Tablet [Nrd-409] , Clotrimazole 1% And Beclomethasone 0.025% Lotion [Nrd-411] , Ketaconazole 2% Lotion [Nrd-412] , Minoxidil 5% Topical Solution In 60Ml [Nrd-414] , Sunscreen Lotion Spf 30 (Octinoxate 7.5%, Avobenzone 2%, Oxybenzone 3%, Octocrylene 3% And Zinc Oxide 2%) 50Ml [ Nrd-418] , Clotrimazole 10Mg Lozenses [Nrd-419] , Formoterol 6 Mcg. And Budesonide 400 Mcg. Mdi Ip [Nrd-424] , Levosalbutamol 50Mcg. And Ipratropium 40Mcg. Mdi [Nrd-425] , Levosalbutamol 50 Mcg Mdi [Nrd-426] , Fluticasone Propionate Nasal Spray Ip 50Mcg [ Nrd-429] , Neomycin Sulphate And Bacitracin Zinc Ointment Usp 5 Mg And 500 Iu/ Gm Ointment Usp [ Nrd-431] , Neomycin, Polymyxin B And Bacitracin Zinc Ophthalmic Ointment 5 Gm (Each Gram Contains Polymyxin B Sulfate Usp 5000 Units, Bacitracin 400 Units , Neomycin Sulphate 3400 Unit And Zinc Oxide In Ointment Base [Nrd-438] , Tacrolimus 0 .03% Ointment [Nrd-439] , Tacrolimus 0 .1% Ointment [Nrd-440] , Bacillus Clausii Spores Suspension 2 Billion/5Ml [Nrd-452] , Formeterol 20Mcg And Budesonide 0.5Mg Respitory Solution/ Suspension [Nrd-453] , Levosalbutamol 1.25Mg And Ipratropium 500Mcg Respiratory Solution 2.5Ml [Nrd-454] , Budesonide 0.5 Mg/2Ml Respiratory Suspension [ Nrd-456] , Nevirapine 200 Each Tablet Contain Nevirapine 200Mg [ Nrd-457] , Glycopyrronium Inhalation Solution 25Mcg 2 Ml [Nrd-458] , Tiotropium Bromide Powder For Inhalation 18Mcg [Nrd-460] , Fosfomycin Trometamol Powder 3Gm [Nrd-463] , L Arginine 3Gm And Proanthocynadine 75Mg Granules [Nrd-465] , Racecadotril 10 Mg [ Nrd-467] , Atazanavir300 Andritonavir100, Each Tablet Contain Atazanavir Sulphate Ip 300Mg Andritonavir Ip100mg [Nrd-470] , Cefaclor 125Mg Suspension (Each 5 Ml Contain Cefaclor 125 Mg Ip) [Nrd-475] , Codiene Phosphate And Tripolidine Syrup (Each 5Ml Contains Codiene Phosphate 10Mg And Tripolidine 1.25Mg) [ Nrd-476] , Amlodipine Oral Solution 1 Mg/Ml Bp [ Nrd-477] , Calcium Phosphate 200 Ml Syrup (Each 10Ml Contain Elemental Calcium 300Mg Elemental Phosphorus 150Mg Elemental Magnesium 75Mg Elemental Zinc 4Mg Vitamin D3 200 300Iu.) [Nrd-481] , Cefixime Oral Suspension/Dry Syrup 50Mg Each 5 Ml Contain Cefixime Oral Suspension/Dry Syrup 50Mg [Nrd-482] , Cefixime Oral Suspension/Dry Syrup 100Mg Each 5 Ml Contain Cefixime Oral Suspension/Dry Syrup100mg [Nrd-483] , Cefpodoxime Proxetil Oral Suspension 50Mg Syrup I.P. Each 5 Ml Contain Cefpodoxime Proxetil Oral Suspension 50Mg Syrup 30 Ml Pack I.P. [Nrd-484] , Cefpodoxime Proxetil Oral Suspension 50Mg Syrup I.P. Each 5 Ml Contain Cefpodoxime Proxetil Oral Suspension 50Mg Syrup 50 Ml Pack I.P. [Nrd-484] , Cefpodoxime Proxetil Oral Suspension 100Mg Syrup I.P. Each 5 Ml Contain Cefpodoxime Proxetil Oral Suspension 100Mg Syrup 30 Ml Pack I.P. [Nrd-485] , Cefpodoxime Proxetil Oral Suspension 100Mg Syrup I.P. Each 5 Ml Contain Cefpodoxime Proxetil Oral Suspension 100Mg Syrup 50 Ml Pack I.P. [Nrd-485] , Cefuroxime Axetil Oral Suspension 125Mg/5Ml Syrup B.P. 50 Ml Pack [Nrd-486] , Clarithromycin For Oral Suspension/Dry Syrup 125Mg/5Ml (50 Ml Pack) [Nrd-487] , Cefoperazone Injection 1Gm [Nrd-488] , Cyclosporine Oral Solution 100Mg/Ml Syrup I.P. [Nrd-489] , Rabbit Atg (Anti Thymocyte Globulin) 25Mg / 5Ml Inj. [Nrd-490] , Cyproheptadine Hcl 2Mg / 5Ml Syrup I.P. [ Nrd-491] , Drotavarine Hcl 20Mg / 5Ml Syrup/Suspension [ Nrd-494] , Liquid Paraffin And Milk Of Magnesia Suspension (Each 15 Ml Contains: Milk Of Magnesia 11.25 Ml And Liquid Paraffin 3.75 Ml 170 Ml) [Nrd-495] , Paracetamol And Ibuprofen Syrup (Each 5Ml Contains Paracetamol 162.5Mg And Ibuprofen 100 Mg) 60Ml [Nrd-496] , Enzyme Syrup (Each 5Ml Contains Diastase50mg And Pepsin 10Mg) 100Ml [Nrd-497] , Levo Carnitine 500Mg/ 5Ml In 30 Ml Syrup Usp [Nrd-501] , Levofloxacin Oral Solution/ Syrup 125Mg / 5Ml [Nrd-503] , Linezolid 100Mg/5Ml In 30Ml Syrup [Nrd-504] , Mefenamic Acid 100 Mg/5Ml Suspension ( Each 5Ml Contains Mefenamic Acid 100 Mg) [Nrd-505] , Montelucast And Levocetrizine Syrup/ Suspension Each 5Ml Contains Montelucast 4Mg And Levocetrizine 2.5 Mg 60 Ml Pack [Nrd-508] , Montelucast And Levocetrizine Syrup/ Suspension Each 5Ml Contains Montelucast 4Mg And Levocetrizine 2.5 Mg 100 Ml Pack [Nrd-508] , Nitrofurantoin Oral Suspension 25 Mg/5Ml In 100 Ml Bp [Nrd-509] , Ondansetron Oral Suspension/Solution/ Syrup 2Mg/5Ml 60 Ml Pack [Nrd-510] , Phenobarbitone 20Mg/ 5Ml In 100Ml Syrup [ Nrd-512] , Piracetam 500Mg/5Ml Suspension/Syrup 100 Ml [Nrd-514] , Potassium Magnesium Citrate Syrup/ Solution Each 5Ml Contians Potassium Citrate 1100Mg And Magnesium Citrate 375 Mg [Nrd-515] , Ranitidine 75 Mg /5Ml Oral Suspension/Solution/Syrup I.P. 100 Ml Pack [Nrd-516] , Sodium Picosulphate Oral Suspension/ Solution/ Syrup 5Mg/ 5Ml (100 Ml Pack) [Nrd-519] , Sorbitol And Tricholine Citrate Syrup / Solution Each 10Ml Contains Sorbitol (70%) 7.15Gm And Tricholine Citrate ( 66%) 0.55Gm [Nrd-520] , Sucralphate Syrup/ Suspension Each 5Ml Contains Sucralphate 500Mg 100 Ml Pack [Nrd-521] , Triclofos Oral Suspension500 Mg/ 5Ml In 30Ml Syrup I.P. [Nrd-522] , Zinc Oral Syrup / Solution / Suspension 20 Mg / 5Ml 100 Ml Pack [Nrd-524] , Azithromycin 100Mg/ 5Ml Oral Syrup / Suspension 15 Ml Pack [Nrd-525] , Azithromycin 100Mg/ 5Ml Oral Syrup / Suspension 30 Ml Pack [Nrd-525] , Azithromycin 200Mg/ 5Ml Oral Syrup / Suspension 15 Ml Pack [Nrd-526] , Azithromycin 200Mg/ 5Ml Oral Syrup / Suspension 30 Ml Pack [Nrd-526] , Midodrine 5Mg Tab. [ Nrd-527] , Hydroxyurea 500Mg Tab./Cap. I.P. [Nrd-528] , Everolimus 5Mg Tab./ Cap. [Nrd-530] , Everolimus 10Mg Tab./ Cap. [Nrd-531] , Tacrolimus 0.25 Tab./ Cap. I.P. [Nrd-532] , Nintedanib 150Mg Tab./Cap. [Nrd-533] , 6-Mercaptopurine Tablet 20Mg [Nrd-534] , Acebrophylline Special Repair 200 Mg Tab. [Nrd-535] , Aceclofenac 100Mg And Thiocolchicoside 4Mg Tab. [Nrd-536] , Aceclofenac Special Repair 200 Mg Tab. [Nrd-537] , Aceclofenac And Paracetamol And Serratiopeptidase (100 And 325 And 15 Mg) Tab. [Nrd-538] , Afatinib 20 Mg Tab. [ Nrd-539] , Afatinib 30 Mg Tab. [ Nrd-540] , Afatinib 40 Mg Tab. [ Nrd-541] , Alendronate Sodium 70 Mg Tab. I.P. [Nrd-542] , Alfuzosin Prolong/ Extended Release Tab. 10Mg Ip [Nrd-543] , Alpelisib 150 Mg Tab. [ Nrd-544] , Alpelisib 250 Mg Tab. [ Nrd-546] , Amantadine 100Mg Tablet/Capsule [Nrd-547] , Amisulpride 50 Mg Tab. I.P. [Nrd-548] , Apixaban 2.5 Mg Tab. [ Nrd-549] , Apixaban 5Mg Tab. [ Nrd-550] , Aripiprazole 10 Mg Tab. I.P. [Nrd-551] , Aripiprazole 5 Mg Tab. I.P. [Nrd-552] , Atomoxetine 10 Mg Tab/Cap [Nrd-555] , Atomoxetin 18 Mg Tab. [Nrd-556] , Atomoxetin 25 Mg Tab. [Nrd-557] , Axitinib 5 Mg Tab. [ Nrd-559] , Bilastin 20 Mg Tab. [ Nrd-560] , Bosentan 62.5 Mg Tab. I.P. [Nrd-562] , Buprinorphine Tablet 2Mg [Nrd-565] , Calcium Acetate 667 Tab. Usp [Nrd-566] , Capmatinib 200 Mg Tab. [Nrd-568] , Carbimazole 10 Mg Tab. I.P. [Nrd-569] , Cefixime And Potassium Clavulanate 200 And 125Mg Tab. [ Nrd-570] , Cefpodoxime Proxetil Tablet 100Mg / Cefpodoxime Proxetil Dispersibletablet100 Mg [Nrd-571] , Cefpodoxime 200Mg Tab. I.P. [Nrd-572] , Cefpodoxime Cv 325 Tab [Nrd-573] , Chlordiazepoxide 25 Mg Tab. I.P. [Nrd-574] , Chlordiazepoxide 5 Mg And Clidinium 2.5 Mg Tablet [Nrd-575] , Chlorthalidone 6.25 Mg Tab. I.P. [Nrd-576] , Cholchicine 0.5Mg Tab. I.P. [Nrd-577] , Cilostazol 50Mg Tab. I.P. [Nrd-578] , Cilostazol 100Mg Tab. I.P. [Nrd-579] , Clarithromycin 250 Mg Tab. I.P. [Nrd-580] , Clarithromycin 500Mg Tab. I.P. [Nrd-581] , Cilnidipine 5 Mg Tab. I.P. [Nrd-582] , Cilnidipine10 Mg Tab. I.P. [Nrd-583] , Cilnidipine 20 Mg Tab. I.P. [Nrd-584] , Clonazepam 0.25 Tab. I.P. [Nrd-585] , Clonazepam 1Mg Tab. I.P. [Nrd-586] , Clozapine 25 Mg Tab. I.P. [Nrd-587] , Clozapine 50 Mg Tab. I.P. [Nrd-588] , Clozapine 100 Mg Tab. I.P. [Nrd-589] , Cotrimoxazole Tablet Ip 480Mg (Trimethoprim 80Mg And Sulphamethoxazole 400Mg) [Nrd-590] , Cefuroxime Axetil 500 Mg. Tab. I.P. [Nrd-591] , Cyproheptadine 4Mg Tab. I.P. [Nrd-592] , Cyproterone Acetate 2 Mg And Ethynil Estradiol. 035Mg Tab Bp [Nrd-593] , Dabigatran 150 Mg Cap [Nrd-594] , Dabigatran 110 Mg Cap [Nrd-595] , Dabrafenib Capsule / Tablet 50 Mg [Nrd-596] , Dacomitinib 15 Mg Tab. [Nrd-597] , Dapagliflozin 10 Mg Tab. [Nrd-599] , Dapoxetine 30 Mg Tab.I.P. [Nrd-600] , Deflazacort 6Mg Tab. [ Nrd-602] , Deflazacort 12 Mg Tab. [Nrd-603] , Desvenlafaxine 50Mg Cr/Pr/Sr/Er Tablet [ Nrd-604] , Diclofenac Sodium 50Mg And Paracetamol 325Mg And Serratiopeptidase 10Mg Tablet [Nrd-605] , Diltiazem Cr/Prolonged Released Tablet 90Mg [ Nrd-608] , Disulfiram Tablet 500Mg [Nrd-611] , Disulfiram 250Mg Tab. I.P. [Nrd-612] , Donepezil 5 Mg Tab. I.P. [Nrd-613] , Duloxetine Gastro Resistant 20 Mg Tab. I.P. [Nrd-614] , Duloxitine Gastro Resistant30 Mg Tab. I.P. [Nrd-615] , Dydrogesterone 10Mg Tab. I.P. [Nrd-616] , Eltrombopag 25Mg Tablet / Capsule [Nrd-617] , Eltrombopag 50Mg Tablet / Capsule [Nrd-618] , Erlotinib 150 Mg Tab. I.P. [Nrd-622] , Erlotinib 100Mg Tab. I.P. [Nrd-623] , Esomeprazole 40 Mg Tab. I.P. [Nrd-624] , Estradiol Valerate 2 Mg Tab. [Nrd-625] , Enzalutamide 40Mg Tablet / Capusle [Nrd-627] , Ethynil Estradiol 0.02Mg And Desogestral 0.15Mg Tablets [Nrd-628] , Etizolam 0.5 Mg Tab. I.P. [Nrd-629] , Etoricoxib And Thiocolchicoside(60 And 8 Mg) Tab. [Nrd-630] , Febuxostat 40 Mg Tab. [ Nrd-632] , Febuxostat 80 Mg Tab. [ Nrd-633] , Fexofenadine 120 Mg Tab. I.P. [Nrd-634] , Fexofenadine 180 Mg Tab. I.P. [Nrd-635] , Flunarizine 10Mg Tab. [ Nrd-638] , Fluvoxamine 100 Mg Tab. I.P. [Nrd-639] , Fluvoxamine 50 Mg Tab. I.P. [Nrd-640] , Furosemide 20Mg And Spironolactone 50Mg Tab. [Nrd-643] , Ibrutinib 140Mg Tablet / Capsule [Nrd-645] , Indomethacin 75 Mg Special Repair Tablet / Capsule [Nrd-646] , Ivabradine 5Mg Tab. [ Nrd-648] , Ivermectin 6 Mg And Albendazole 400 Mg Dispersible/Chewable Tab [Nrd-649] , Ivermectin 6Mg Tab. I.P. [Nrd-650] , Ivermectin 12Mg Tab.I.P. [Nrd-651] , Ketoconazole 200 Mg Tab. I.P. [Nrd-652] , Lacosamide 50 Mg Tab. B.P. [Nrd-653] , Lamotrigine Dispersible 100Mg Tab. I.P. [Nrd-654] , Lapatinib Tablet 250Mg [Nrd-655] , Lenalidomide 25Mg Cap [Nrd-656] , Lenalidomide 10 Mg Cap [Nrd-657] , Lenvatinib 4 Mg Cap [ Nrd-658] , Lenvatinib 10 Mg Cap [ Nrd-659] , Levetiracetam Ip 250 Mg Tab. I.P. [Nrd-660] , Levodopa And Carbidopa And Entacapone 100Mg/25Mg/200Mg Tab. [Nrd-662] , Levofloxacin 750 Mg Tab. I.P. [Nrd-663] , Thyroxine/ Levothyroxine Sodium 25 Mcg Tab. I.P [Nrd-665] , Thyroxine/ Levothyroxine Sodium 75 Mcg Tab. I.P [Nrd-666] , Linaglipitin 5Mg Tab. [ Nrd-668] , Lopinavir 200Mg And Ritonavir 50 Mg Tab. I.P. [Nrd-669] , Loratadine 10 Mg Tab. I.P. [Nrd-670] , Megestrol Acetate 160 Mg Tab. I.P. [Nrd-673] , Melatonin 3 Mg Tab. [ Nrd-674] , Melphalan 2Mg Tab. I.P. [Nrd-675] , Methimazole Tablet 5Mg [Nrd-677] , Methimazole 10Mg Tab.Usp [Nrd-678] , Methylprednisolone 4Mg Tab. I.P. [Nrd-682] , Methylprednisolone 16Mg Tab. I.P. [Nrd-683] , Methylprednisolone 8Mg Tab. I.P. [Nrd-684] , Mirtazapine 7.5Mg Tab. I.P. [Nrd-689] , Mirtazapine 15Mg Tab. I.P. [Nrd-690] , Montelukast 4 Mg Tab. I.P. [Nrd-692] , Montelukast 5 Mg Tab. I.P. [Nrd-693] , Montelukast 10 Mg Tab. I.P. [Nrd-694] , Morphine 10Mg Tab. I.P. [Nrd-695] , Moxifloxacin 400 Mg Tab. B.P. [Nrd-697] , Moxonidine 0.2 Mg Tab. B.P. [Nrd-698] , Moxonidine 0.3 Mg Tab. B.P. [Nrd-699] , N Acetylecystine Effervescent Form, Orange Flavour, 600 Mg Tab. [Nrd-700] , Naltrexone 50 Mg Tab. I.P. [Nrd-701] , Nebivolol 5Mg Tab. I.P. [Nrd-702] , Nebivolol 10Mg Tab. I.P. [Nrd-703] , Nicorandil 5Mg Tab. I.P. [Nrd-704] , Nicoumalone 1 Mg Tab. I.P. [Nrd-705] , Nicoumalone 3 Mg Tab. I.P. [Nrd-706] , Nicoumalone 4 Mg Tab. I.P. [Nrd-707] , Nifidipine Capsule 10Mg [Nrd-708] , Nifidipine 20Mg Special Repair Tab. I.P. [Nrd-709] , Nilotinib 150 Mg Tablet/Capsule [Nrd-710] , Nilotinib 200 Mg Tablet/ Capsule [Nrd-711] , Nitazoxanide 500Mg Tab. [Nrd-713] , Nitrazepam 5Mg Tab.I.P. [Nrd-714] , Nitrazepam 10 Mg Tab. I.P. [Nrd-715] , Olaparib 100 Mg Tablet [Nrd-716] , Olaparib 150 Mg Tablet [Nrd-717] , Olmesartan Medoxomil 20 Mg Tab. I.P. [Nrd-718] , Osimertinib 80 Mg Tablet [Nrd-720] , Oxcarbazepine 300Mg Tab. I.P. [Nrd-721] , Oxcarbazepine 450Mg Tab. I.P. [Nrd-722] , Oxazepam 15Mg Tab. I.P. [Nrd-723] , Pantoprazole 20Mg Tab. I.P. [Nrd-725] , Paracetomol 650 Mg Tab. I.P. [Nrd-726] , Paroxetine 12.5 Mg Control Release / Prolonged Release Tablet [Nrd-727] , Paroxetine 25 Mg Control Release / Prolonged Release Tablet [Nrd-728] , Pazopanib 200Mg Tablet/ Capsule [Nrd-729] , Pazopanib 400Mg Tablet/ Capsule [Nrd-730] , Pheniramine 25 Mg Tab. I.P. [Nrd-735] , Pirfenidone 200 Mg Tab.I.P. [Nrd-737] , Pirfenidone 400 Mg Tab.I.P. [Nrd-738] , Piroxicam Dt 20Mg Tab. I.P. [Nrd-739] , Pomalidomide 2 Mg Cap [Nrd-740] , Pomalidomide 4 Mg Cap [Nrd-741] , Posacozazole 100Gm Cap. [Nrd-742] , Posacozazole 40 Mg/Ml Suspension [Nrd-743] , Prasugrel 10Mg Tab Tab. [Nrd-744] , Prazosin 5Mg Tab. Er/ Pr/Cr [Nrd-745] , Prednisolone Ip 40Mg Tab. I.P. [Nrd-746] , Desogestrel 0.075Mg Tablet [Nrd-750] , Propranolol 10Mg Tablet/ Capsule [Nrd-751] , Propranolol 40 Mg Special Repair Tablet / Capsule [Nrd-752] , Ranolazine 500Mg Tab. Er/Pr/Cr [Nrd-755] , Rasagiline1mg Tab. [ Nrd-756] , Regorafenib 40 Mg Tab. [Nrd-757] , Repaglinide 1Mg Tab. [ Nrd-759] , Ribociclib 200 Mg Tab. [ Nrd-760] , Rifampicin 450 Mg Tab. I.P. [Nrd-762] , Rifampicin 600 Mg Tab. I.P. [Nrd-763] , Rifaximin 200 Tab. B.P. [Nrd-764] , Rifaximin 550Mg Tab. I.P. [Nrd-765] , Rivaroxaban 10Mg Tab. B.P. [Nrd-766] , Rivaroxaban 15Mg Tab. B.P. [Nrd-767] , Rivaroxaban 20Mg Tab. B.P. [Nrd-768] , Rizatriptan 10Mg Tab. I.P. [Nrd-769] , Ropinirole 0.25Mg Tab. I.P. [Nrd-770] , Rosuvastatin 10Mg And Fenofibrate 160Mg Tab. I.P. [Nrd-771] , Ruxolitinib 5 Mg Tablet/ Capsule [Nrd-772] , Ruxolitinib 15 Mg Tablet / Capsule [Nrd-774] , Ruxolitinib 20 Mg Tablet / Capsule. [Nrd-775] , Selegiline 5Mg Tab. I.P. [Nrd-776] , Serratiopeptidase 10Mg Tab. I.P. [Nrd-777] , Serratiopeptidase 20 Mg Tab. I.P. [Nrd-778] , Sevelamer Carbonate 800 Mg Tab. [Nrd-779] , Sildosin 8 Mg And Dutasteride 0.5 Mg Tablet / Capsule [Nrd-780] , Sitagliptine And Metformin (50/500) Tab [Nrd-782] , Sildenafil 20 Mg Tab. I.P. [Nrd-783] , Sofosbuvir 400 Mg And Velpatasvir 100 Mg Tab. [Nrd-784] , Solifenacin Succinate 10 Mg Tab. I.P. [Nrd-785] , Sorafenib 200 Mg Tab. I.P. [Nrd-786] , Sunitinib 12.5 Mg Capsule [Nrd-788] , Sunitinib 25 Mg Cap [ Nrd-789] , Sunitinib 50 Mg Cap [ Nrd-790] , Tacrolimus 1Mg Tablet/ Capsule [Nrd-791] , Tapentadol 50Mg Tab. [ Nrd-793] , Tegafur 100Mg And Uracil 224Mg Capsule [ Nrd-794] , Tenofovir 300Mg Tab. [ Nrd-795] , Tetrabenazine 25Mg Tab. [Nrd-796] , Ticagrelor 90Mg Tablet / Capsule [Nrd-797] , Tofacitinib 5 Mg Tab. [ Nrd-798] , Tolvapatan 15Mg Tab. [ Nrd-799] , Topiramate 50Mg Tab. I.P. [Nrd-800] , Torsemide 20Mg Tab. I.P. [Nrd-801] , Tramadol 37.5Mg And Paracetamol 325Mg Tab. [Nrd-802] , Trimetazidine Hcl Modified Release Tablet 35Mg [Nrd-804] , Trimetazidine Hydrochloride Modified Release (Cr/Sr/Pr) 60 Mg Capsule/Tablet [ Nrd-805] , Trypsin 48Mg And Rutoside 100Mg And Bromelain 90 Mg Tablet [Nrd-806] , Trypsin Chymotripsin Tablet (Each Enteric Coated Tablet Contains 1 Lacks Unit Of Enzymetic Activity) [Nrd-807] , Ulipristal 5Mg Tab. [ Nrd-808] , Voriconazole 200 Mg Tab. I.P. [Nrd-809] , Verapamil Hydrochloride Tablet Sustained Release 120Mg [Nrd-811] , Vildagliptin 50Mg Tab. I.P. [Nrd-812] , Voglibose 0.2 Mg Tab Tab. I.P. [Nrd-813] , Voglibose 0.3 Mg Tab Tab. I.P. [Nrd-814] , Warfarin 1Mg Tab. I.P. [Nrd-815] , Warfarin 2Mg Tab. I.P. [Nrd-816] , Warfarin 3Mg Tab. I.P. [Nrd-817] , Zinc 50Mg Tab. [Nrd-818] , Zolpidem 10Mg Tab. I.P. [Nrd-819] , Zonisamide 50 Mg Cap [ Nrd-820] , Zonisamide 100 Mg Tab. [Nrd-821] , Tiotropium Inhalation 9Mcg [Nrd-822] , Human Albumin 20% In 50 Ml Vial Inj. [Nrd-823] , Tetanus Vaccine ( Adsorbed) Ip In 0.5 Ml Inj. [Nrd-824] , Abacavir300 Each Tablet Contain Abacavir 300Mg Ip [Nrd-825] , Lamivudine 100 Each Tablet Contain Lamivudine 100 Mg [ Nrd-826] , Zideovudine 60Mg And Lamivudine 30Mg [Nrd-828] , Triamcinolone Oromucosal Paste Bp 0.1% W/W [Nrd-886] , Glycopegylated Extended Half Life Nonacog Beta Pegol F Ix 500Iu [Nrd-889] , Glycopegylated Extended Half Life Nonacog Beta Pegol F Ix 1000Iu [Nrd-890] , Glycopegylated Extended Half Life Factor Viii 500Iu [Nrd-891] , Glycopegylated Extended Half Life Factor Viii 1000Iu [ Nrd-892] , Entecavir 1Mg Tab./Cap Film Coated [Nrd-894] , Nicotine 2Mg Flavoured Gum/Oral Thin Film/ Ods [Nrd-899] , Nicotine 4Mg Tab [Nrd-900] , Dapagliflozin 5Mg Tablet [Nrd-901] , Chlorthalidone 12.5 Mg Tab [Nrd-902] , Chlorthalidone 25Mg Tablet [Nrd-903] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 [R1] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 [R2] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 [R3] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 [R4] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 [R5] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 [R6] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 [R7] , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) [R8] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm [R9] , Absorbable Surgical Suture (Synthetic) Sterilised Needled ( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm [R10] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle Size-1/0 30Mm Length 90 Cm [R11] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40Mm Length 90 Cm [ R12] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-1 1/2 Cir Rb Needle40mm Length 90 Cm [R13] , Absorbable Surgical Suture(Synthetic) Sterilised Needled( Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed [ R14] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) [R15] , Absorbable Surgical Suture (Synthetic) Sterilised Needled ( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm [ R16] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) [R17] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm [ R18] , Absorbable Surgical Suture(Synthetic) Sterilised Needled( Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm [R19] , Chromic Catgut Suture(3/ 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm) Size 5/0 (Details In Rc) [R76] , Chromic Catgut Suture(3/ 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm) Size 6/0 (Details In Rc) [R77] , Chromic Catgut Suture(3/ 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm) Size 4/0 ( Details In Rc) [R80] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0 (1/2 Cir Rb Needle 20Mm, Length 76 Cm) [ R20] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) [R21] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0 (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) [R22] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) [R23] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) [R24] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 4/0 (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) [R25] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 5/0(3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) [R26] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) [R27] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) [R28] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb 13 Mm Needle, Length 75Cm) Double Arm [R29] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle,Length 90 Cm)Size 6/0 [R30] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7/0 (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) [R31] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) [R32] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) [R33] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) [R34] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb Double Needle 17Mm Length 70 - 90 Cm)(Detail In Rc) [R35] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Cir Tapercut Double Needle 17Mm Length 70 Cm)( Detail In Rc) [R36] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm [R37] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) [R38] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm [R39] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0(1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm [R40] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) [R41] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm [R42] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0(1/2 Cir Rb Needle 16 Mm Length 70 Cm) [R43] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) [R44] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) [R45] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) [ R46] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8/0 (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) [R47] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Circle Tapercut 13Mm Double Needle 70Cm) [ R48] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0 (1/2 Circle Cement Concrete 13Mm Needle, Suture Length Of 70Cm) Double Arm [R49] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm [R50] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm [R51] , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/ Blue Size 4/0(1/2 Cir Tapercut,17 Mm Double Needle, Length 75 Cm) [R52] , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/ Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) [ R53] , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm)(Detail In Rc) [R54] , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue) Size 2/0 1/2 Circle Taper Cut,17Mm Double Armed Needle,Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm [R55] , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2-0 1/2 Circle Taper Cut,25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm [ R56] , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green/ White Or Blue/White Coated Polyster Braided (Green / Blue) With Size 3/0 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm [ R57] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size10/0 (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm [R75] , B.B Silk Suture (3/8 Cir Rb Needle 20Mm, Length 76 Cm Size 4/0 ( Details In Rc) [R78] , B.B Silk Suture (3/8 Cir Rb Needle 16Mm, Length 76 Cm Size 5/0 ( Details In Rc) [R79] , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) [R81] , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Contrast Needle 20-26Mm,Suture Length 70Cm) [R82] , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone/Polyglyconate, Monofilament Sutures Size 2/0 (1/2 Circle Oval Rb Needle 26Mm Needle,Suture Length Of 70Cm) [R61] , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate,Size 3/0 (1/2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm) [ R62] , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecapr/Polyglyconate Size 4/0 (1/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) [R63] , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecapr /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) [R64] , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 Mm Length 90Cm) [R65] , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle Rb 31Mm Needle, Length 70Cm) [R66] , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) [R67] , Absorbable Surgical Suture(Synthetic) Antibacterial Coated Sterilised Needled( Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm [R68] , Absorbable Surgical Suture(Synthetic) Antibacterial With Sterilised Needled( Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm [R69] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm [ R70] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/Polyglycolic Acid Violet) Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm [R71] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet) Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm [R72] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture( Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm [R73] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm [ R74] , Absorbable Gelatin Sponge 80 X 50X 10Mm( Details In Rc) [S1] , Asepto Syringe With Transparent Bulb Sterile, 60 Ml [S3] , Blood Administration Set Blood Transfusion Set (Details In Rc) [S4] , Gloves Size 6.5 Inches, Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S5.A] , Gloves Size 6.5 Inches, Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S5.B] , Gloves Size 7 Inches, Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S6.A] , Gloves Size 7 Inches, Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S6.B] , Gloves Size 7.5 Inches, Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S7.A] , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves) (Details In Rc) [S7.B] , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc) [S8.A] , Suction Catheter, Sterile. Size: F G-6 (Details In Rc) [S8.B] , Suction Catheter, Sterile. Size: F G-8 (Details In Rc) [S8.C] , Suction Catheter, Sterile. Size: F G-10 (Details In Rc) [S8.D] , Suction Catheter, Sterile. Size: F G-12 (Details In Rc) [S8.E] , Suction Catheter, Sterile. Size: F G-14 (Details In Rc) [S8.F] , Suction Catheter, Sterile. Size: F G-16 (Details In Rc) [S8.G] , Suction Catheter, Sterile. Size: F G-18 (Details In Rc) [S8.H] , Suction Catheter, Sterile. Size: F G-20 (Details In Rc) [S8.I] , Suction Catheter, Sterile. Size: F G-22 (Details In Rc) [S8.J] , Catheter,Size 8(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.A] , Catheter,Size 10(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.B] , Catheter,Size 16(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.C] , Catheter,Size 18(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.D] , Catheter,Size 20(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.E] , Catheter,Size 22(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.F] , Catheter,Size 24(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.G] , Infant Feeding Tube Size 10Fg(Details In Rc) [S10.A] , Infant Feeding Tube Size 8Fg(Details In Rc) [S10.B] , Infant Feeding Tube Size 5Fg(Details In Rc) [S10.C] , Perfusion Set With Airway And Needle,( Adult Use) Sterile Disposable(Details In Rc) [S11] , Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) Sterile Disposable( Details In Rc) [S12] , Infusion Set With Microdrip,(I.V.)Sterile Disposable(Details In Rc) [S13] , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conforn To Is 12227 [S14] , Sterile Disposable ( Single Use) Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G (Details In Rc) [S15.A] , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.) Size 18G (Details In Rc) [S15.B] , Sterile Disposable ( Single Use) Teflon/ Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G (Details In Rc) [S15.C] , Sterile Disposable ( Single Use) Teflon/ Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G (Details In Rc) [S15.D] , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc) [S15.E] , Mucus Extractor Sterile( Details In Rc) [S16] , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc) [S17.A] , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics (Details In Rc) [S17.B] , Paper Adhesive Plaster 1Inx9 Mts(With Cutter), Non Woven, Non Allergic And Strong Adhesive But Gentle To Skin, Should Conform To The Standards And Test As Per Is And Bp Standard (Detail In Rc) [S18] , Paper Adhesive Plaster 2In X 9.0 Mts(With Cutter), Non Woven, Non Allergic And Strong Adhesive But Gentle To Skin, Should Conform To The Standards And Test As Per Is And Bp Standard (Detail In Rc) [S19] , Paper Adhesive Plaster 3Inx9mts(With Cutter), Non Woven, Non Allergic And Strong Adhesive But Gentle To Skin, Should Conform To The Standards And Test As Per Is And Bp Standard (Detail In Rc) [S20] , Plaster Of Paris Bandage 15Cm X 2.7 Mts/Roll [ S21] , Plaster Of Paris Bandage 10Cm X 2.7Mts [S22] , Ryles Tube / Nasogastric Tube Size: 10(Details In Rc) [S23.A] , Ryles Tube / Nasogastric Tube Size: 12(Details In Rc) [S23.B] , Ryles Tube / Nasogastric Tube Size:14(Details In Rc) [S24.A] , Ryles Tube/Nasogastric Tube Size: 16 (Details In Rc) [S24.B] , Ryles Tube / Nasogastric Tube Size: 18 (Details In Rc) [S24.C] , Scalp Vein Set ( Disposable) Size 18G ( Details In Rc) [S25.A] , Scalp Vein Set ( Disposable) Size 20G ( Details In Rc) [S25.B] , Scalp Vein Set ( Disposable) Size 22G ( Details In Rc) [S25.C] , Scalp Vein Set ( Disposable) Size 24 G ( Details In Rc) [S25.D] , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile,Single Use Disposable(Details In Rc) [S26] , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile,Single Use Disposable(Details In Rc) [S27] , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile,Single Use Disposable(Details In Rc) [S28] , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile,Single Use Disposable(Details In Rc) [S29] , Surgical Blade Sterile, Size 11(Details In Rc) [ S30.A] , Surgical Blade Sterile, Size 15(Details In Rc) [ S30.B] , Surgical Blade Sterile, Size 22(Details In Rc) [ S30.C] , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1/2 Inch ( Details In Rc) [S39.A] , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1/2 Inch ( Details In Rc) [S39.B] , Urine Collecting Bag, Disposable 2000 Ml( Details In Rc) [S40] , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm [S41.A] , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm [S41.B] , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm [S42.A] , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm [S42.B] , Endotracheal Tube, Plain - Size 2.5 (Details In Rc) [S43.A] , Endotracheal Tube, Plain - Size 3 (Details In Rc) [S43.B] , Endotracheal Tube, Plain - Size 3.5 (Details In Rc) [S43.C] , Endotracheal Tube, Plain - Size 4 (Details In Rc) [S43.D] , Endotracheal Tube, Plain - Size 4.5 (Details In Rc) [S43.E] , Endotracheal Tube, Plain - Size 5 (Details In Rc) [S43.F] , Endotracheal Tube, Plain - Size 5.5 (Details In Rc) [S43.G] , Endotracheal Tube, Plain - Size 6 (Details In Rc) [S43.H] , Endotracheal Tube, Plain -Size 6.5 (Details In Rc) [S43.I] , Endotracheal Tube, Plain - Size 7 (Details In Rc) [S43.J] , Endotracheal Tube, Plain - Size 7.5 (Details In Rc) [S43.K] , Endotracheal Tube, Plain - Size 8 (Details In Rc) [S43.L] , Endotracheal Tube, Plain - Size 8.5 (Details In Rc) [S43.M] , Endotracheal Tube, Cuffed - Size 4 (Details In Rc) [S44.A] , Endotracheal Tube, Cuff- Size 4.5 (Details In Rc) [S44.B] , Endotracheal Tube, Cuff - Size 5 Details In Rc [ S44.C] , Endotracheal Tube, Cuff- Size 6 (Details In Rc) [S44.D] , Endotracheal Tube, Cuff- Size 6.5 (Details In Rc) [S44.E] , Endotracheal Tube, Cuff- Size 7 (Details In Rc) [S44.F] , Endotracheal Tube, Cuff- Size 7.5 (Details In Rc) [S44.G] , Endotracheal Tube, Cuff- Size 8 (Details In Rc) [ S44.H] , Endotracheal Tube, Cuff- Size 8.5 (Details In Rc) [S44.I] , Endotracheal Tube, Cuff- Size 9 (Details In Rc) [ S44.J] , Tracheostomy Tube, Plain - All Sizes(Details In Rc) [S45] , Tracheostomy Tube ( Pvc), Cuffed - All Sizes (Details In Rc) [S46] , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc) [S47.A] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) Size 28 ( Details In Rc) [S47.B] , Abdominal Drain Kit, Sterile,Having Drainage Cather And Collection Bag(2000) Ml Size 32 ( Details In Rc) [S47.C] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm [S73] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm [S74] , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm( Details In Rc) [S79] , Bone Wax Sterilised [ S80] , Skin Graft Knife Blade ( Sterile)(Details In Rc) [ S82] , K Wire, Length 375 Mm; 1Mm(Details In Rc) [ S84.A] , K Wire, Length 375 Mm; 1.6Mm(Details In Rc) [ S84.B] , K Wire, Length 375 Mm; 1.8Mm(Details In Rc) [ S84.C] , Face Mask, Disposable( Details In Rc) [S85] , Surgical Cap Disposable (For Surgeons)(Details In Rc) [S86.A] , Surgical Cap, Disposable (For Nurses) (Details In Rc)(Details In Rc) [S86.B] , Foldable Intra Ocular Lense With Injector ( Details In Rc) 11 To 17.5 [S87.A] , Foldable Intra Ocular Lense With Injector ( Details In Rc) 18 To 24 [ S87.B] , Foldable Intra Ocular Lense With Injector ( Details In Rc) 24.5 To 28.5 [S87.C] , Standard Pama Intra Ocular Lenses (Details In Rc) 11 To 17.5 [S88.A] , Standard Pama Intra Ocular Lenses (Details In Rc) 18 To 24 [S88.B] , Standard Pama Intra Ocular Lenses (Details In Rc) 24.5 To 28.5 [S88.C] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powdered [S89.A] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powder Free [S89.B] , Rubber Examination Gloves, Non-Sterile, Extra Small(Details In Rc) [S90.A] , Rubber Examination Gloves,Size Small ( Details In Rc) [S90.B] , Rubber Examination Gloves,Size Medium (Details In Rc) [S90.C] , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large (Details In Rc) [S90.D] , Pressure Monitoring Line / High Pressure Extension Line (Details In Rc) [S91] , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml (Details In Rc) [S92] , Umbilical Catheter For New Born, All Sizes -( Details In Rc) [S93] , Umbilical Cord Clamp ( Details In Rc) [S94] , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property( Details In Rc) [S95] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) [ S96.A] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) [ S96.B] , Bone Cement [S98] , Sanitary Napkin Beltless (Details In Rc) [S99.A] , Sanitary Pads Belt Type( Details In Rc) [S99.B] , Oxygen Mask (Adult) [ S100] , Oxygen Mask (Pediatric) [S101] , Foleys Catheter No. 14 ( Detail In Rc) [S102] , Nelaton Catheter Size 14 Fg(Detail In Rc) [S103] , Ecg Electrode (Detail In Rc) [S104] , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 (Detail In Rc) [S105] , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml (Detail In Rc) [S106] , Urethral Catheter 90 ( Fg-14) Made Up Of Medical Grade Pvc ( Detail In Rc) [S107] , Urethral Catheter 91 ( Fg-10), Made Up Of Medical Grade Pvc ( Detail In Rc) [S108] , Vaccum Suction Set, 2.5 Meter Length (Detail In Rc) [S109] , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile (Detail In Rc) [S110] , Vascular Catheter 16G/ 5Fr, Double Lumen Length 40Cm [S111] , Vascular Catheter With Metal Guide Wire, 4Fr Single Lumen, Distalvalve, Saline Flush Only Size 45Cm Or More [S112] , Vascular Catheter With Metal Guide Wire 3Fr Single Lumen,Micro Introducer,Contrast Media Compatible, Size 45Cm Or More (Logline Iv) [S113] , Vascular Catheter 7Fr-16 Cm With Chlorhexidine, Silver Sulfadiazine Coated Triple Lumen Usfda/Bis With Testing Standard. Introducer Needle 18 G., Spring Guide Wire 45 Cm J Tip, Dilator 8.5 Fr., Raulerson Spring Introduction Syringe 5 Ml [S114] , Vascular Catheter 5Fr/ 16G, Double Lumen Length 50Cm [S115] , Vascular Catheter 5Fr/ 16G, Double Lumen Length 55Cm [S116] , Vascular Catheter With Metal Guide Wire 5Fr Double Lumen, Introducer Safety Piv Catheter 20G, 45Cm Or More (Logline Iv) [S117] , Vascular Catheter With Metal Guide Wire,5Fr Triple Lumen, Size Range 55Cm Or More ( Logline Iv) [S118] , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements (Detail In Rc) [S119] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 10Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S120] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 50Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S121] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 100Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S122] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 150Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S123] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) (Detail In Rc) [S124] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) (Detail In Rc) [S125] , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube (Detail In Rc) [S126] , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property (Detail In Rc) [S127] , Sterile Disposable ( Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G (Detail In Rc) [S128] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Ventilator Without Vent (Detail In Rc) [S129] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc) [S130] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Bipap With Vent (Detail In Rc) [S131] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Bipap With Vent (Detail In Rc) [S132] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support (Detail In Rc) [S133] , Nebulization Mask Adult (Detail In Rc) [ S134] , Nebulization Mask Paediatric (Detail In Rc) [S135] , Chemotherapy Port And Non-Coring Needles( Adult) (Detail In Rc) [ S136] , Chemotherapy Port And Non-Coring Needles( Pediatric) (Detail In Rc) [S137] , Core Biopsy Instrument With Compatible Co-Axial Needle ( Automatic Disposal) [ S138] , Disposable Bone Marrow Biopsy Needle [S139] , Eyelid Occlusion Dressing [S140] , Eye Pressure Shield [ S141] , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point [Nrr-1] , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3O Mm 1/2 Circle Taper Point [Nrr-2] , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting [Nrr-3] , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Taper Point, 90 Cm [Nrr-4] , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting [Nrr-5] , Polyglactin 910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,30Mm Needle, Size 2-0, 1/2 Circle Taper Point, 90 Cm [Nrr-6] , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Reverse Cutting Os Needle, 90 Cm [ Nrr-7] , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point [Nrr-8] , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,20Mm Needle, Size 3-0, 1/2 Circle Taper Point, 70 Cm [Nrr-9] , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Undyed 37-40Mm 1/2 Circle Reverse Cutting [Nrr-10] , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting ( Heavy) 23 Mm -25 Mm Needle [Nrr-11] , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm [Nrr-12] , Polyglactin 5-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm [ Nrr-13] , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure Mp, Purest Form Of Triclosan, 26Mm Needle, Size 2-0, 3/8 Circle Cutting, 90 Cm [Nrr-15] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% And Above, Violet 1/2 Circle Taper Point, 17-20Mm Needle, Length 70Cm Size 3-0 [Nrr-16] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan , Violet 1/2 Circle Taper Point Rb-1, 17 Mm Needle, Length 70Cm Size 4-0 [Nrr-17] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/ 2 Circle Taper Point Rb-2, Double Needle, 13 Mm Needle, Length 70Cm Size 5-0 [Nrr-18] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/ 8 Circle Taper Point, Bb Sgle Armed Needle 17 Mm Needle, Length 70Cm Size 5-0 [Nrr-19] , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm [Nrr-22] , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm [Nrr-23] , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm [Nrr-24] , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm [Nrr-25] , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point [Nrr-26] , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm ½ Circle Taper Point [ Nrr-27] , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm ½ Circle Taper Point [ Nrr-28] , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm ½ Circle Taper Point [Nrr-29] , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 3-0,70 Cm,1/2 Circle R.B.,20 Mm [Nrr-30] , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 4-0,70 Cm,1/2 Circle R.B.,20 Mm [Nrr-31] , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 5-0,70 Cm,1/2 Circle R.B.,13 Mm [Nrr-32] , Monofilament Glycomer 1 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont [Nrr-33] , Monofilament Glycomer 2-0 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont [Nrr-34] , Non Absorbable Surgical Suture, Sterilized Surical Needled Black Braided Silk With Needle 1/2 Circle Round Bodied 30 Mm Needle , Length 70 Cm Size 2-0 [Nrr-35] , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 [Nrr-36] , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 [Nrr-37] , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 [Nrr-38] , Silk Reel 4-0 [Nrr-39] , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm [Nrr-44] , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm [Nrr-45] , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle 26 Mm [Nrr-54] , Polypropylene Blue Monofilament Usp 3/0,2,90 Cm,1/2 Circle Taper Point ( Double Armed),26 Mm [ Nrr-55] , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm [Nrr-56] , Polypropylene Blue Monofilament Usp 5/0,1,90 Cm,1/2 Circle Taper Point ( Double Armed),18 Mm [ Nrr-57] , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle (Cutting) 13 Mm [Nrr-58] , Non Absorbable Polypropylene Surgical Sutures Size:7-0,3/8 Circle C1 Taper Point Cv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed, 8 Mm,60 Cm [Nrr-59] , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point [Nrr-60] , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm ½ Circle Taper Point [ Nrr-61] , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point [Nrr-62] , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X36 , Blue 26Mm ½ Circle Taper Point [ Nrr-63] , Monofilament Polybuetester Coated With Polytribiolate 3-090Cm 2Xv-20X36 , Blue 26Mm ½ Circle Taper Point [ Nrr-64] , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Tp [Nrr-65] , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Tp, [Nrr- 66] , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm ½ Circle Taper Point [Nrr-67] , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Tp [Nrr-68] , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Tp [Nrr-69] , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Tp [Nrr-70] , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc [Nrr-71] , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 [Nrr-73] , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm [ Nrr-74] , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 [Nrr-75] , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 1-0,90 Cm,1/ 2 Circle R.B.,30 Mm [ Nrr-79] , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm [ Nrr-80] , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm [ Nrr-81] , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 5-0,76 Cm,3/ 8 Circle R.B,12 Mm [ Nrr-82] , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm [Nrr-83] , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 - Undyed 2-0, 1/2 Circle Taperpoint, 36 Mm,100 Cm [Nrr-85] , Absorbable Surgical Suture (Synthetic ) Coated Polyglactin/Pga 910 Voilet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm 2670 [Nrr-86] , Absorbable Surgical Suture (Synthetic ) Coated Polyglactin/Pga 910 Voilet 4-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm 2442 [Nrr-87] , Absorbable Surgical Suture (Synthetic ) Coated Polyglactin/Pga 910 Voilet 3-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm 2442 [Nrr-88] , Absorbable Surgical Suture (Synthetic ) Coated Polyglactin/Pga 910 Voilet 5-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm 2442 [Nrr-90] , Absorbable Surgical Suture (Synthetic ) Coated Polyglactin/Pga 910 Voilet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm [Nrr-91] , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 26Mm Length 70Cm3-0 [Nrr-95] , Non Absorbable Surgical Suture Sterilized Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm4-0 [Nrr-96] , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm 5-0 [Nrr-97] , Non Absorbable Polypropylene Surgical Sutures Size:6-0,3/8 Circle 175-6 Taper Point/Rc Bv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed, 9.3 Mm,60 Cm 13 Mm [ Nrr-98] , Non Absorbable Polypropylene Surgical Sutures Size:7-0, Compound Curve ( 1/2 &3/8 Circle) Circle 175-6 Taper Point Blackmatte Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed, 9.3 Mm,60 Cm [Nrr-99] , Monofilament Synthetic Absorbable Suture Poliglecaprone 25 - Undyed Ep 3-0,70 Cm,1 /2 Circle Oval R.B. J.B. Needle,26 Mm [Nrr-100] , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 - Undyed 3-0, 3/8 Circle Reverse Cutting,Ps Prime 24 Mm,75 Cm [ Nrr-103] , Nonabsorbable Polypropylene Light Weight Macroporous Mesh. Usfda/Ce Certificate With Nnotified Body [Nrs-1] , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body [Nrs-2] , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body [Nrs-4] , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm. Circular Usfda/Ce Certificate With Notified Body [Nrs-5] , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm.Circular Usfda/Ce Certificate With Notified Body [Nrs-6] , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96 Mm Width And 0.61 Mm Diameter Usfda/Ce Certificate With Notified Body [Nrs-7] , Light Weight Monofilament Polypropylene Mesh Size Large Left 10.8* 16Cm /15*10 Cm [Nrs-10] , Light Weight Monofilament Polypropylene Mesh Size Large Right 10.8* 16Cm /15*10 Cm [Nrs-11] , Light Weight Monofilament Polypropylene Mesh Size Extra Large Left 12.4Cm * 17.3/16*12 Cm [Nrs-12] , Light Weight Monofilament Polypropylene Mesh Size Extra Large Right 12.4Cm * 17.3/16*12 Cm [Nrs-13] , Linear Cutter 55Mm With Six Rows [Nrs-15] , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only [Nrs-16] , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter75mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only 6 Rows 3-D Staple Technology [Nrs-17] , Universal Linear Cutter Cartridge 55-60 Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55-60 Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology [ Nrs-18] , Curved Cutter Stapler 40 Mm Linear Cutter Or Curved Shaped Radial Stapler Cartridge For Simultaneous Cutting And Stapling [Nrs-19] , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm( Detail In Rc) [Nrs-20] , Circular Stapler 33Mm With Controlled Tissue Compression With Adjustable Staple Hight (1.5-2.2 Mm) For Controlled Tissue Compression Longer Staple Leg 5.2 Mm To 5.5Mm, Non Slip Grip Surface [Nrs-23] , Laparoscopic Cartridge For Stapler 60 Mm Blue,1.5 Mm [Nrs-24] , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm [Nrs-25] , Procedure For Prolapse And Hemorrhoids Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler [Nrs-26] , Optically Guided Bladeless Trocar 12Mm Length 150Mm [Nrs-27] , Optically Guided Bladeless Trocar 12Mm Length 100Mm [Nrs-28] , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure [ Nrs-29] , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology (Detail In Rc) [Nrs-30] , Varied Staple Height Reloads/Cartridges For 80 Mm Gia [Nrs-31] , Linear Cutter With Varied Staple Height Tri -Staple Gia 60 Mm [ Nrs-32] , Eea Circular Stapler Purple Colour Medium Thick [Nrs-33] , Linear Cutter With Varied Staple Height Tri -Staple Gia 80 Mm [ Nrs-34] , Wound Protector Medium 5-9 Cm [Nrs-36] , Endo Catch Specimen Removal Kit With 34.5Cm Shaft Length [ Nrs-38] , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology/Over Load Mechanism And Digital Display/Clip Indicator Titanium Alloy Clips- U Shaped [Nrs-39] , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360 Rotation And 0-45 Articulation In Both Direction For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only [Nrs-41] , Laparoscopic Liner Cutter With Or Without Integrated/Integrated Fresh Knife With 360 Rotation And 0-45 Articulation In Both Direction For Use With Cartridges Sizes Of 60Mm (Detail In Rc) [ Nrs-42] , Hand Activated Curved Taper Tip Coagulating Shears Compatible Focus 9 [Nrs-43] , Hand Activated Curved Taper Tip Coagulating Shears Compatible Focus 17 [Nrs-44] , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide [Nrs-45] , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm [ Nrs-50] , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade (Detail In Rc) [Nrs-52] , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy With Focus Plus Shear- Hp Blue [Nrs-53] , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy With Ace Plus Shear Hp054 [Nrs-54] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates-2 Mm Thickness (2*2) Hole [Nrs-57] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates-2 Mm Thickness (1*2) Hole [Nrs-58] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates-2 Mm Thickness (1*1) Hole [Nrs-59] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (2 Mm ) [Nrs-60] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (1.5 Mm ) [Nrs-61] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (2.5 Mm ) [Nrs-62] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (3 Mm ) [Nrs-63] , Speech Prosthesis For Laryngectomy 22 5Fr ( 6 Mm) [Nrs-74] , Speech Prosthesis For Laryngectomy 22 5Fr ( 8 Mm) [Nrs-75] , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm [Nrs-81] , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm [ Nrs-82] , Varied Staple Height Reloads/Cartridges For 60 Mm Gia [Nrs-83] , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm Or Size 2-3*5-6Cm [Nrs-85] , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5 *10Cm Or Size 5-7*7-11Cm Or 4*8Cm [Nrs-86] , Disposable 10 Mm Endoscopic Clip Applier Medium/Large Size [ Nrs-87] , Disposable Clip Applier Preloaded With 20 Clips Medium [Nrs-92] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) 8 No [ Nrs-98] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) 10 No [ Nrs-99] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) No. 14 [ Nrs-100] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) No. 12 [ Nrs-101] , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter [ Nrs-103] , Central Neck Line Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Bis With Testing Standard [Nrs-104] , Microcatheter For Aneurysm, Two Tip,Outer Diameter-2.1 To 2.4 And 1.7 Fr. Inner Diameter- 0.017 To 0.015. Nitinol Brading, Straight Tip Compatible With 0.014 Inch Microwire It Should Have Radio Opaque Tip And Hydrophilic Coating. [Nrs-105] , Straight Tip Microcatheter With 4 Transtion Zone Proximal Ss Triple Braid, Distal Segment Ss Soft Distal Of 6/10 Cm, Outer Layer Pebax,Inner Layer Of Ss Braid Coil ( Detail In Rc) [Nrs-106] , Straight Tip Microcatheter With 4 Transtion Zone Proximal Ss Triple Braid, Distal Segment Ss Soft Distal 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Ss Braid Coil, Ptfe And Polyolefin Elastomer Single Tip Markar 0.027 Id [Nrs-107] , Flow Guided Microcatheter Extruded Construction Prox. Size 2.7 F Middle Size 2.4 F D. Size 1.2 To 1.8 F Working Length 155 To 180 Cath. Endo Hole Dia 0.009-0.13 (Detail In Rc) [Nrs-108] , Stinless Steel Hydrophilic Coated 0.14 Inch Neuro Guide Wire With Twister Technology, Microridge Design, Optimized Core Wire Profile 205Cm In Length And Coil Length 5Cm [Nrs-109] , Aortic Punch 4 [Nrs-117] , Aortic Punch 4.5 [Nrs-118] , Aortic Punch 3.6 [Nrs-121] , Laproscopic Port With Trocar 150Mm Length [ Nrs-124] , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle 14G X 11Cm To 20Cm [Nrs-128] , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Size 18Gx11cm Or Above [ Nrs-134] , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Size 18Gx15cm Or Above [ Nrs-135] , Incise Drape Made Up Of Polyester Film With An Acryllc Adhesive That Contains A Complex Of Lodoform Lodine Concentration Of 0.092 Mg Lodine/Cm2. It Should Be Gamma Sterile And Us-Fda Approved. Size Should Be 56Cm 45Cm (Adhesive Area) [Nrs-140] , Rem (Return Electrode Monitoring) Single Use ( Detail In Rc) [Nrs-141] , Surgical Gloves 6.5 Puncture Indicator Technology [Nrs-144] , Surgical Gloves 7 Puncture Indicator Technology [Nrs-145] , Surgical Gloves 7.5 Puncture Indicator Technology [Nrs-146] , Ionic Silver Highly Absorbent Multilayer Foam Dressing With Broad Spectrum Antimicrobial, Bactericidal Efficacies Size 10Cmx10cm And More (Detail In Rc) [ Nrs-148] , Self-Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms And More [Nrs-149] , Double/Single Wall Resuscitator With Peep Valve In Adult Made Of Silicone Rubber (1300 Ml Or More) Weight Adult (415 G) And More [Nrs-151] , Double Wall Resuscitator With Peep Valve In Paediatrics [ Nrs-152] , Single Patient Use Sebs Resuscitator (With Peep Valve In Neonatal 220-300Ml) [Nrs-155] , Pre-Formed Sga With Gastric Access & Intubation Sizes ? 3 [Nrs-160] , Pre-Formed Sga With Gastric Access & Intubation Size 4 [Nrs-161] , Silicone Pre-Formed Sga Size 2 [Nrs-166] , Silicone Pre-Formed Sga Size 3 [Nrs-168] , Silicone Pre-Formed Sga Size 4 [Nrs-169] , Offset Connector Cardio Sensor Electrodes Sizes?Adult [Nrs-174] , Disposable Sga Anatomical Curve Size 3 [Nrs-188] , Disposable Sga Anatomical Curve Size 4 [Nrs-189] , Ultrasorbs Ap Disposable Drypads For Moisture Management 58.4X90cm (Detail In Rc) [Nrs-194] , Over-The-Ear Nasal Cannula Usfda/Bis With Testing Standard. [Nrs-196] , Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Cm Star-Lumen Tubing [Nrs-197] , Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle (Detail In Rc) [ Nrs-199] , Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle ( Detail In Rc) [Nrs-200] , Adult Mask For Tracheostomy [Nrs-202] , Pardiatric Mask For Tracheostomy [Nrs-203] , Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Adjustable Nose Clip Designed For Aerosol Therapy; Must Be With Supplied With 6Ft -7Ft. Usfda/Bis With Testing Standard. [Nrs-204] , Adult Conventional Single Water Trap (Non-Heated) [Nrs-207A] , Adult Conventional Single Water Trap ( Heated) [Nrs-207B] , Adult Ventilator Circuit With Universal Single Limb [Nrs-208] , Adult Ventilator Circuit Single Water Trap (Non-Heated) Available In A Variety Of Different Configurations And Styles. All Adult Conventional Circuits With 70-72 Inch. Long, Manufacturer Must Be Us- Fda/ Eu Ce Four Digit Notify/ Iso [Nrs-209] , Infant Prong Cpap Cannula Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K And Ce Certification. [Nrs-211] , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters [Nrs-212] , Tracheostomy Hme [ Nrs-213] , Double Lumen Endobronchial Tube Left: Size-37Fr [Nrs-217] , Double Lumen Endobronchial Tube Left: Size-39Fr [Nrs-218] , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. [Nrs-231] , High Pressure Tube In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda And Ce/ Dgci Or Usfda/Bis With Testing Standard. [Nrs-232] , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda And Ce/ Dgci Or Usfda/Bis With Testing Standard [Nrs-233] , High Pressure Tube High Pressure Tubing In 76Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard [Nrs-234] , High Pressure Tube In 122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi Usfda/Bis With Testing Standard [Nrs-235] , High Pressure Tube In 83Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda And Ce/ Dgci Or Usfda/Bis With Testing Standard [Nrs-236] , Torque Device For .014 Inch To .038 Inch Standard And Hydrophilic Guide Wires With Squeeze-Load-Release Mechanism [Nrs-237] , Radial Hemostatis Band In 24Cm Curved Backer Plat With Large Area And Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers (Detail In Rc) [ Nrs-238] , Radial Band Radial Hemostatis Band In 29 Cm [Nrs-239] , Angiography Needle 18G [Nrs-240] , Angiography Needle 20G [Nrs-242] , Angiography Wire Ptfe Guidewire In 0.035,0.038 In Regular Length [Nrs-244] , Angiography Wire Long Length Ptfe Guidewire In .035 Inch, .038Inch, With Exchange Length (Detail In Rc) [ Nrs-245] , Hydrophilic Wire Long Length Of .018Inch, . 025Inch, .035Inch, . 038Inch In 150-180Cm Length With Straight, Angled Tip. Hydrated Gel Coating And True 1: 1 Torque. [Nrs-248A] , Hydrophilic Wire Long Length Of .018 Inch, . 025 Inch, .035 Inch, .038 Inch In 220-260Cm Length With Straight, Angled Tip. Hydrated Gel Coating And True 1: 1 Torque. [Nrs-248B] , Hydrophillic Braided Sheath Introducer In 4F To 7F, Length: 7Cm, 10-11Cm, 15-16Cm, 23-25Cm Or 7-25 Cm With The Option Of .018 Inch, .021 Inch, .025 Inch Plastic Jacketed And Spring Coil Guidewire. [ Nrs-249] , Femoral Sheath With Needle In 5F To 8F, Length: 11-25Cm With Puncher Needle Of 18G And Guidewire Of .035 Inch, .038 Inch. Should Be Available In Polypropylene. Usfda Approved [Nrs-250] , Angiography Radial Catheters 4-6F [Nrs-252] , One Loop And Triple Loop Snare Kit(2-35Mm Diameter, 90-Degree Nitinol And Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2-45Mm Diameter Three Interlaced Nitinol Loops) For Foreign Body Retrieval [Nrs-253] , Ptca Kit (1)Three Port Manifold Withknobs (2)Pressure Line(3)Fluid Line (4)Contrast Line (5) Three Way Stopcock(6) One Y-Conector(7)One Inflation Device With Manometer Upto 30 Atm( 8)Luer Lock Syringe 10 Ml(9)Insertion Needle (10)Torque Device [Nrs-254] , Closed Suction Catheter For Paediatrics 5Fr [Nrs-255] , Closed Suction Catheter For Paediatrics 6Fr [Nrs-256] , Closed Suction Catheter For Paediatrics 7Fr [Nrs-257] , Closed Suction Catheter For Paediatrics Number And Color Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors For Different Tubes In The Pack. Catheter Is Made By Medical Grade Silicon/ Poly Urethane Material. Sizes 8Fr. [ Nrs-258] , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations Made Of Medical Grade Silicon/ Poly Urethane Material. Sizes Are 10Fr (Detail In Rc) [Nrs-259] , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 12Fr ( Detail In Rc) [Nrs-260] , Paediatric Endotracheal Tube Size 3Mm [Nrs-261] , Paediatric Endotracheal Tube Size 3.5Mm [Nrs-262] , Paediatric Endotracheal Tube Size 5.5Mm [Nrs-263] , Kimvent Bal Cath 13Fr [Nrs-266] , Kimvent Bal Cath 16Fr [Nrs-267] , Catheter Mount Double Swivel Connector With Bronchoscopy Port Approved By Us Fda [ Nrs-269] , Gastrostomy Feeding Tube Size ? 20 [Nrs-274] , Gastrostomy Feeding Tube Size ? 24 [Nrs-275] , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr [Nrs-278] , Anti Microbial Gloves 6 Inches [Nrs-308.A] , Anti Microbial Gloves 6.5 Inches [Nrs-308.B] , Anti Microbial Gloves 7 Inches [Nrs-308.C] , Anti Microbial Gloves 7.5 Inches [Nrs-308.D] , Anti Microbial Gloves 8 Inches [Nrs-308.E] , Anterior Chamber Iol Pmma Material Single Piece Kelman Multiflex Design 5-6 Mm Optic Size With 12-13Mm Overall Size Biconvex Power Range 12 To 24 [Nrs- 309] , Capsular Tension Ring Standard Pmma Material With One Eyelet Each At Each End 10 To 12 Mm Overall Diameter Sterile [Nrs-310] , Neonatal High Flow Nasal Cannula Having 8 Litre Flow With Soft Tip [ Nrs-326] , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 0.7Ml/Min) [Nrs-327] , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 4.5Ml/Min) [Nrs-328] , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr.) [Nrs-334] , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) [Nrs-335] , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) [Nrs-336] , Trans Radial Introducer Sheeths 4F [Nrs-341] , Trans Radial Introducer Sheeths 5F [Nrs-342] , Trans Radial Introducer Sheeths 6F [Nrs-343] , Long Introducer Sheath Dedicated For Transradial Access Size 5Fr [Nrs-368] , Long Introducer Sheath Dedicated For Transradial Access Size 6Fr [Nrs-369] , Long Introducer Sheath Dedicated For Transradial Access Size 7Fr [Nrs-370] , Ptfe Coated Diagnostic Guide Wire (Exchange Length, Regular Stiffness) 0.035Inches [ Nrs-381] , Hydrophilic Diagnostic Guide Wire ? Radifocus Tarumo Type (Regular Length, Regular Stiffness) 0.032 Inches [ Nrs-387] , Hydrophilic Diagnostic Guide Wire ? Radifocus Tarumo Type (Regular Length, Regular Stiffness) 0.035Inches [ Nrs-388] , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.035Inches [ Nrs-392] , Judkins Catheter (Jr) Right Judkins Diagnostic Catheter In Various Standard Curves And Length 5Fr [Nrs-398] , Judkins Catheter (Jr) Right Judkins Diagnostic Catheter In Various Standard Curves And Length 6Fr [Nrs-399] , Judkins Catheter (Jr) Right Judkins Diagnostic Catheter In Various Standard Curves And Length 7Fr [Nrs-400] , Judkins Catheter (Jl) Us Fda + Ce/Dgci Approved Left Judkins Diagnostic Catheter In Various Standard And Length 5Fr [Nrs-403] , Judkins Catheter (Jl) Us Fda + Ce/Dgci Approved, Left Judkins Diagnostic Catheter In Various Standard And Length 6Fr [Nrs-404] , Judkins Catheter (Jl) Us Fda + Ce/Dgci Approved, Left Judkins Diagnostic Catheter In Various Standard And Length 7Fr [Nrs-405] , Pigtail Catheter Us Fda And Ce/Dgci Approved Left And Right In Various Standard Curves And Lengths 5 Fr [ Nrs-408] , Pigtail Catheter Us Fda And Ce/Dgci Approved Left And Right In Various Standard Curves And Lengths 6 Fr [ Nrs-409] , Pigtail Catheter Us Fda And Ce/Dgci Approved Left And Right In Various Standard Curves And Lengths 7 Fr [ Nrs-410] , Multipurpose Catheter 5 French Us Fda And Ce/ Dgci Approved Multipurpose Catheters In Various Standard Curves And Lengths [Nrs-413] , Amplatz Catheter Amplatz Left (Al) 5Fr [ Nrs-418] , Amplatz Catheter Amplatz Left (Al) 6Fr [ Nrs-419] , Amplatz Catheter Amplatz Left (Al) 7Fr [ Nrs-420] , Amplatz Catheter Amplatz Right (Ar) 5Fr [Nrs-423] , Amplatz Catheter Amplatz Right (Ar) 6Fr [Nrs-424] , Amplatz Catheter Amplatz Right (Ar) 7Fr [Nrs-425] , Nternal Mammary Catheter 5Fr [Nrs-428] , Nternal Mammary Catheter 6Fr [Nrs-429] , Nternal Mammary Catheter 7Fr [Nrs-430] , By-Pass Graft Catheter 5Fr [Nrs-433] , By-Pass Graft Catheter 6Fr [Nrs-434] , By-Pass Graft Catheter 7Fr [Nrs-435] , Transradial Diagnostic Coronary Catheter Tiger Type 5Fr [Nrs-438] , Introducer Sheaths For Pediatric Use (Size 5 Fr. [Nrs-453] , Arterial Pressure Monitor Lines (100 Cm Long) Should Be Soft And Kink Resistant·Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End [Nrs-478] , Arterial Pressure Monitor Lines (150 Cm Long) Should Be Soft And Kink Resistant·Should Give Reliable Pressure Measurements·Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End [Nrs-479] , Arterial Pressure Monitor Lines (200 Cm Long) Should Be Soft And Kink Resistant·Should Give Reliable Pressure Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End·[Nrs-480] , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved [Nrs-501] , Venaseal Closure System For Varicose Veins N Butyl Based Adhesive Formation 50/90/105/ 120Cm 145Cm(3/4/6/8 F,014/0.35Inch Compatible [Nrs-515] , Bone Marrow Biopsy Needle Size8g 4And6 In With Diamond Bevel Tip And Tapered Distal Canula Trocar/Diamond Tip For Easy Coring Of Bone Marking Available In 8,11,13 Gauze ( Detail In Rc) [Nrs-532] , Silicone Foleys Catheter Size 12 Fr,2-Way With Three Noble Metal Alloy Coating Consisting Of Gold, Silver And Palladium [Nrs-537] , Silicone Foleys Catheter Size-14 Fr,2-Way With Three Noble Metal Alloy Coating Consisting Of Gold, Silver And Palladium [Nrs-538] , Silicone Foleys Catheter Size-16 Fr ,2-Way With Three Noble Metal Alloy Coating Consisting Of Gold, Silver And Palladium (Coated Internally And Externally Surfaces) [Nrs-539] , Silicone Foleys Catheter (18Fr, 2-Way) 100% Medical-Grade Silicone. Radiopaque Stripe Throughout The Catheter Length For X-Ray Visibility. Standard (Rounded) Tip. Color-Coded System To Identify French Sizes [Nrs-540] , Cutting & Coagulations Device With With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. [ Nrs-542] , Cutting & Coagulations Device With With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. [Nrs-543] , Cutting And Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument(Deatail In Rc) [Nrs-544] , Cutting And Coagulations Device With Tissue Fusion Vessel Sealing Technology Instrument For Open Surgeries With Instrument Length Between 21-23Cm And Electrode Length Between 17-21Cm Having [Nrs-545] , Cutting And Coagulations Device With Tissue Fusion Ligasure Technology Have36mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. [Nrs-546] , Cutting And Coagulations Device With Tissue Fusion Vessel Sealing Technology For Open Surgeries With Reusable Clamp Length Between 16-23Cm, With 12-40 Degree With Straight / Curved Jaw (Detail In Rc) [Nrs-547] , Double Lumen Catheter With Kit Internal Juglar/ Straight (Madeup Of Flexible Radiopaque Polyurethane With Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator , Introducer, Needle 18 G, Size- 12 Frx16 Cm [Nrs-552] , Double Lumen Catheter With Kit Internal Juglar/ Straight Madeup Of Flexible Radiopaque Polyurethane With Tip, Needle 18G, Size- 12 Frx13 Cm (Detail In Rc) [Nrs-553] , Long Term Double Lumen Dialysis Catheter With Kit Accessories, Symmetrical Tip Retrograde And Antigrade Size-15 Frx27 Cm (Detail In Rc) [Nrs-555] , Long Term Double Lumen Dialysis Catheter With Kit Retrograde And Antigrade Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 19 Cm [Nrs-556] , Long Term Double Lumen Dialysis Catheter With Kit Retrograde And Antigrade Long Term Double Lumen Dialysis Catheter Size 15 Fr X 23 Cm [Nrs-557] , Transperant Surgical Wound Dressing Size-5Cm X 5.72Cm [Nrs-558] , Transperant Surgical Wound Dressing Size-10X15 [Nrs-559] , Transperant Surgical Wound Dressing Size-10X30 [Nrs-561] , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property Size 9To11cm And 25To35cm [Nrs-562] , Multi-Vent Mask Pediatric, Air Entrainment Masks, Each Mask Includes Color-Coded Diluters Green For Low Concentration, White For Medium Concentration. Locking Ring. Complete Kit With 7-Ft Oxygen Tubing (Detail In Rc) [ Nrs-564] , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Zigzag Ports. Available Both Endotracheal And Tracheostomy. Used For 72Hr,12-Fr (Detail In Rc) [Nrs-566] , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Medical Grade Silicon Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. [ Nrs-567] , Closed Suction Catheter Has Isolated Cleaning Chamber 12 Fr. Isolated Turbo Cleaning Chamber. Made Up Of Medical Grade Silicon/ Poly Urethane Zig-Zag Ports. Available In Both Endotracheal And Tracheostomy Version. Used For 72Hr. Size 12 Fr. [Nrs-568] , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports. Can Be Used For 72Hr. Size 14-Fr [Nrs- 569] , Multifocal Iol Biconvex, Single Piece Optic Size 6 Mm, Overall 12-13 Mm Single Or Double Loop Uv Blocking 360 Degrees Square Edge Sterile Injector For Sub 2.8 Mm Incision Power Plus16 To Plus25 D Diffractive Multifocal Design(Deatil In Rc) [Nrs-571] , Glaucoma Drainage Implant (Valved) With Silicon Tube Adult 184Mm Square [Nrs-572] , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric 96Mm Square [Nrs-573] , Scleral Fixiated Intraoccular Lense Single Piece Pmma Optic6-6.5Mm Overall13.5Mm Haptic With Hole For Suture Fixation [Nrs-586] , Central Line With Triple Lumen With Y Needle With Syringe And Guide Wire 7Fr To 8.5Fr With 15 Cm To 20 Cm Catheter With Tecoflex/ Polyurathane Material With Usfda Approved. [ Nrs-593] , Post Operative Surgical Cover Dressings Hydrofiber/Foam Dressings With 1.2% W/ W Impregnated Ionic Silver (Detail In Rc) [ Nrs-602] , Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver And Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce, Iso And Fda Approved [Nrs-603] , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit [ Nrs-604] , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit [Nrs-606] , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit [Nrs-608] , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm ( Detail In Rc) [Nrs-609] , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm ( Detail In Rc) [Nrs-610] , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm (Detail In Rc) [ Nrs-611] , Antimicrobial Transperant Provides Immediate And Continuous Antimicrobial Protection With Integrated Chlorhexidine Gluconate (Chg) Gel Pad Size 11.5Cm To 8.5Cm [ Nrs-615] , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Size 13X13 Cm And More [Nrs-620] , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Size 10X25 Cm [ Nrs-625] , Polysiloxane Or Silicone Gel Sheet For Scar Management. Size 10 X 10 Cm Or 10X18cm [ Nrs-626A] , Polysiloxane And Silicone Gel Sheet For Scar Managment Size 5 X 5 Cm [Nrs-626B] , Triple Layered Antimicrobial Form Dressing For Burn Wounds With Silver Sulphate, Silver Content 1 2Mg/Cm2 Size 20X20 Cm [Nrs-627] , Dressing With Native Collagen-Elastin / Biodegradable Matrix, Flexible, Conformable At Anatomical Area, Easy To Use, Apply And Handle Size More Than 70X50mm And 2Mm In Thickness [Nrs-629] , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge, Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour 8Mm [ Nrs-633.A] , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge, Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0Mm , Purple Colour 10Mm [Nrs-633.B] , Nasal Haemostatic Sponge Pack With Out Airway 8Cm [Nrs-686] , Nasal Haemostatic Sponge Pack With Out Airway 10Cm [Nrs-687] , Nasal Haemostatic Sponge Pack (With Airway) 8Cm [Nrs-688] , Flexomatlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To End. It Should Be Usfda/Ce/Bis/Is. [ Nrs-718] , Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp Data Scope And Cath Lab Transducer) And Iccu Should Meet Highest Medical Industrial Standards [ Nrs-721] , Dialyzer Size 1.3 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs-732] , Dialyzer Size 1.4 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs-733] , Dialyzer Size 1.6 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs-734] , Dialyzer Size 1.8 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs-735] , Padiatric Dialyzer Size 0.6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/ Polyethersulfon) With 1.Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector [Nrs-736] , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/ Polyethersulfon) With 1.Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector [Nrs-737]
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
32.
Tourism #11085444 Technical Bid
Tender For Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer. , Supplying And Filling Moorum In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry In Cement Mortar 1:3 (1Cement : 3 Coarse Sand) With Bricks Of Class Designation 75 Kg /Cm2. B. Upto Floor V Level. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs, Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of Sail, Tata, Vizag Made Only (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. Minimum Grade Of Steel - Fe 500 , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4B Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint.In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Providing & Fixing In Position Galvalume/Zincalume Flashings, Cappings, Ridges, Gutters Upto 600Mm/610Mm Girth And Min 3.00M In Length (Cold Rolled Steel 550 Mpa Yeild Stress Astm A 446 Grade E) With Hot-Dip Metallic Coating Of Aluminium-Zinc Alloy(Az 150 Galvalume) (150 Gms/Sqm Total Of Both Sides With Al-Zn Composition= 55% & 43.5% Resp. & 1.5% Si Conforming To Astm 792/ As 1397) 0.45 Mm Base Metal Thickness And 0.50Mm Total Coated Thickness, Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respects With Az 150 Gsm Smp Color Coated (20Mic Exterior Coat Of Silicon Modified Polyester Paint System Over 5 Mic Primer And 5 Mic Polyester Back Coat Over 5 Mic Primer) Incl. Fixing To Purlins With No 12X14X55Mm Mechanically Galvanised Hex Head Self Drilling Screws Of The Best Quality As Per As-3566 Class 3-4 Approved, Which Should Be Compatible To Be Used With Sheets. With Integral Washers And Epdm Seals Etc. Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. Plain Grill , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excludingfixingaccessoriessuchasnuts,Bolts, Fasteners Etc.). , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. Light Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Jet Black With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. ( Price Range 2000 To 2100 Rs Per Sq Mtr.) , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. ( Price Range 1550 To 1600 Rs Per Sq Mtr.) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm .80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Fixing 18Mm Thick Polished Black Granite Machine Cut For Kitchen Platforms, Counters, Window Sills, Door Frame, Urinal Partitions , Fascia And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edge To Give High Gloss Finish, Etc. Complete At All Levels.( Price Range Rs.1500 To Rs.1700 Per. Sq.M ) , Providing 25Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 60 Cm L X45 Cm H X 15 Cm T , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). 20 Mm Thick. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 (1 Cement: 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , 12 Mm Thick Cement Plaster 1:4 (1 Cement:4 Fine Sand) , 6Mm Thick Cement Plaster To Ceiling With 1:3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer , Extra For Plastering Done On Moldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws , Plugs And Priming Coat On Unexposed Surfaces Etc. 50X12Mm Size. , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 300X 16 X 5 Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Provided And Fixing 150 Mm Chromium Plated Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutters Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete. 200 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Window With 3 Tracks And 2 Shutters Sliding Window With Tobular Frame Ployster Powder If Thicness 75-80 Microns With Approved Standard Accessaries Such As Ball Beaing Rollers, Concealed Lock, 6Mm Thick Plain Clear Glass With Epdm Beading Etc. , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete. 10 Mm Dia , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete.12 Mm Dia , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work, For Every Additional Span Of One Meter Or Part Thereof Beyond 10 Mts. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Doors, Windows And Clearestory Windows (Steel Or Wood) Shutters Including Chowkhats Architrave Holdfast Etc. Complete And Staking Within 50 Mt. Lead. Of Area 3 Sq.M. And Below , Dismantling Wood Work Of Area Below 40 Sq.Cm. Wrought Framed And Fixed In Frames, Other Frames And Trusses Including Stacking Of Material Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Nandi In Frp As Per Tender Drawing , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Laying 300X350X160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete) , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Or Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Saraca Ashoka , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Nyctanthes , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Filliciam Decipiens , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Dichotoma , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Millingtonia Hortensis , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Jacaranda Mimosifolia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neolamarckia Cadamba , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevetia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Alba , Supplying & Planting Shrubs, Creepers, Ground Covers, As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. , Providing And Fixing White Vitreous China Type Water Closet Squatting Pan (European Type W.C. Pan) With Dual Flushing (Citren Nelson/ Similar)With Stop Cock Wall Flanges Flush Pipe Or Elbow And Vacuum Breaker Coupling Etc. Including Cutting Making Good The Walls And Floors Where Required. (Excluding Handicap Toilets) , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430 X 260 X 350 Mm And 340 X 430 X 265 Mm Sizes Respectively With Pvc Automatic Flushing Cistern With Fittings, R.S. Or C.I. Brackets, Standard Size Galvanized Steel Flush Pipe And Spreaders With Brass Unions & G.I. Clamps Complete, Including Painting Of Cistern And Fittings, Cutting And Making Good The Walls And Floors Where Required. (A)One Urinal Basin With 5 Liters P .V .C. Automatic Flushing Cistern. , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required. Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws. Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Wall Mixer With 3 In 1 System With 115Mm Long Bend Pipe For Connection To Over Head Shower Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing C.P. Brass Towel Rail Complete With C.P. Brass Brackets Fixed To Wooden Cleats With C. P. Brass Screws. 750X20 , Providing & Fixing Soap Dish Chromium Plated With Brackets Fixed To Wooden Cleats With Cp Brass Screw , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed .110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed. 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating.110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door :110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door :110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door 110Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door . 75Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Providing And Fixing R.P.V.C. Vent Cowl: 75Mm , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Cm2 In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar. , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:.B) 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 32Mm Outer Dia. , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 15Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 40 Mm Nominal Bore . , Providing And Fixing Non-Return Valve Of Approved Quality :40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality .25 Mm Nominal Bore , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 25 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 32 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 40 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 50 Mm , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701;1996. 1000 Lit. Capacity , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70B50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Wall Mounted Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Complete. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (B) 10 To 40 A , Supply, Installation, Testing And Commissioning Of 3 Kva 1 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Square / Circular Max. 20 W Pendent Light With Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd10%, P.F. 0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Suspended Accessories Complete. , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii))
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
33.
Power #11055259 AOC
Tender Document For Sub-Station and Transmission Line [PACKAGE-C8(1B)]-TECHNICALSPECIFICATION FOR 12kV, 800A, 18.4kA, MULTI PANEL (Incoming, Bus Coupler with Adaptor Panel and Outgoing) SHUNT TRIP, INDOOR TYPE SCADA COMPATIBLE SWITCHGEAR WITH MOTOR OPERATED SPRING CLOSING VACUUM CIRCUIT BREAKER- 1 ELECTRICAL PART : 2 WBSETCL Assessed Quantities: 3 245KV 40KA for 3sec Gas Insulated Switchgear - i)2500 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker for line and Transformers & 2500A for Bus coupler Bay iv) CT with current ratio 1600-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification v) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc. vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 4 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 5 LA for Line bay ( one number per phase - to be installed within GIS) 6 CompleteTransformer Bays 7 Buscoupler Bay 8 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 9 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 10 Portable UHF PD monitoring System - The analyser shall have 6 channel input withinherent PD location accuracy of 0.5m., colour display unit and user friendly interface for detailed analysis.The system includes allaccessoriesto monitorPD, UHF cables,required software and other accessories to complete as per Technical Specification. 11 Dew Point Meter as per Technical Specification 12 145KV 31.5KA for 3sec Gas Insulated Switchgear i)2000 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker iv) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc.v) CT with current ratio 1000-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 13 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 14 Complete Transformer Bays for LV side of 160 MVA 220/132 KV Transformer & HV side of 50 MVA 132/33 KV Transformers 15 Bus coupler Bay 16 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 17 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 18 36 KV, 31.5KA for 3sec Indoor, floor mounted drawoutSwitchgear Assembly (2500A Bus rating with Copper Bus Bar) with VCB suitable for EHV cable entry withtripple termination arrangement and bus earthing arrangement from both side, Line earthing arrangement and dead line status and corresponding electrical and mechanicalinterlocking arrangementas per technical specification and requirement comprising of - 19 Outgoing Feeder Bays, 1250A Circuit Breaker ratingas per Techspec. 20 LV side of50MVA 132/33KV Transformer Bays (2000 A Breaker Capacity) CT Ratio 2000-1000/1A 3 coreas per Tech spec 21 HV side of6.3 MVA 33/11KV Transformer Bays(1250 A Breaker Capacity ) as per Tech Spec 22 Station service transformer bay (1250A Circuit Breaker rating) 23 Bus section Bay (2500 A Breaker Capacity) 24 (i)2(two) set of 3 phase Bus PT - 5 limb, (One set each for Main Bus-I & Main Bus-II) with isolation arrangement.as per Tech Spec. (ii) Other required equipment & accessories like Bus Earthing arrangement etc. to complete the system . 25 12 KV, 1600 A, 25 KA, 30 V DC, SCADA compatible, VCB Switchgear includingProtection Relays, ,control & annunciation equipment and other accessories complete as per technical specification (uploaded for Nandanpuronly) Cable and bus earthing shall be electrically and mechanically interlocked with associated breaker as per interlock requirement. but rating should be as per BOQrequirement comprising of - 26 Outgoing Line Bays (CT Ratio 400-200/1) 2 coreVCB rating 1250A 27 Incoming Transformer Bays(CT Ratio 600-400/1A) 4 core VCB rating 1250A 28 Bus section Bay VCB rating 1600A 29 (i) 3(Three) set of 3 phase Bus PTwith isolation arrangement must be mounted above incomer switchgearpanel. (ii) Other required equipment and accessories like Bus earthing arrangement etc to complete the system 30 Electric Overhead Travelling Crane (E.O.T.) 31 Electric Overhead Travelling Crane (E.O.T.)- For 220 KV GIS Building 5.0 Metric Ton capacity or maximum weight of GIS shipping unit whichever is higher -complete with all accessories as per technical specification and requirement. 32 Transformers : 33 160 MVA, 220/132/33 KV, 3 Phase ,Auto Transformer suitablefor NIFPSwith Bushing CTs and NCTS andRTCC panel alonwith BCUand other accessories as per technical specification ofAuto Transformer. 220KV & 132KV bushingshall be of RIP/RIS type. 34 Nitrogen injection type Fire Prevention and ExtinguishingSystem including reservoir tank andall required accessories for 160 MVA, 220/132/33 KV, 3 Phase Power Transformer 35 50 MVA, 132/33 KV, 3 Phase, 2 winding Power Transformerwith Bushing CTs and NCTsincluding RTCC panel alongwith BCU and alongwith all accessoriesin line with technical specification of Power Transformer.132 KVbushingshall be of RIP/RIS type. 36 6.3 MVA, 33/11 KV, 3 Phase, 2 winding Power Transformer with Bushing CTs and NCTs in line with technical specification of Power Transformer . As per Tech spec 37 STATION SERVICE TRANSFORMER: 315 KVA, 33/0.415 KV, 3Ph, 2-Windingas per technical specification andrequirement 38 EARTHINGTRANSFORMER: 33KV, 3 Ph ,fault current rating of874 Amp for 30 secas per Technical Specification and requirement 39 Isolators : As per Technical specification 40 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITHOUT EARTHING SWITCH (excluding insulators) for HV side of 160 MVA Transformers(water proof mechanism housing with auxiliary switch) 41 Solid Core Insulator for each set of above Isolators 42 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITH EARTHING SWITCH (excluding insulators) for Line bay(water proof mechanism housing with auxiliary switch) 43 Solid Core Insulator for each set of above Isolators 44 132KV, 1250 A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with Earth Switch for line feeder, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 45 Solid coreInsulator for each set of above Isolators 46 132KV, 1250A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with out Earth Switch for Transformers, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 47 Solid coreInsulator for each set of above Isolators 48 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - forHV side of 33/11KV Transformer & Earthing Transformer(excludingInsulators ) 49 Solid coreInsulator for each set of above Isolators 50 33KV, 2000 A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - for LV side of 132/33 KV Transformer,(excludingInsulators ) 51 Solid coreInsulator for each set of above Isolators 52 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assembly with Horn-gap fuse units to be mounted on same structure of isolator ( for Station service Transformers ) as per Tech. Specification(excluding insulator) 53 Solid Core Insulator for each set of above Isolators 54 LIGHTNINGARRESTORAs per Technical specification 55 198 KV, single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos. 160 MVA Transformersas per technical specification and as per requirement. (Polymer type) 56 198 KV class polymer type LA at Composite Tower 57 120 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless for 2 nos 160MVA Transformers,2 nos 50MVA Transformerand line bays (Polymer type) 58 42 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos 50MVA transformer, 3 Nos 6.3 MVA 33/11 KV Transformer &2 nos.315KVA station serviceTransformer) ((Polymer type) 59 12 KV, 3 phase 10KA,Station class GapelessLA (LV side of 3nos. 6.3MVA Transformers) (Polymer type) 60 220 V Battery & Charger( As per technical Specification ) 61 VRLA Battery SET - 800AH 220 Voltas per Tech Spec. 62 Battery Health monitoring system forabovementioned 220V batteries as per Technical Specification. 63 Battery Charger - 220Volt. suitable for above Battery set in line with Technical Specification(Float Charger capacity - 80A and Float cum Boost Charger capacity - 150A) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also. 64 VRLA BATTERY SET -75 AH 30 VoltCapacity will be as per design or75 AH whichever is higher as per uploadedtech spec 65 Battery Charger - 30Volt. Foalt cum Boost Charger Float charger capacity 35A or as per design whichever is higher as per Tech Spec ( uploaded) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also.(as per uploaded spec.) as per uploaded spec 66 PROTECTION PANEL ( SIMPLEX REAR Open Door type ) inclusive of all relays, Annunciator (Minimum 24 windows or more as per scheme requirement, with RS485 port for Modbus Communication, Auxiliary AC and DC Supply as well as Dedicated AC Fail and DC Fail windows) at each panel and other accessories as per specificaction and requirement. (Protection Panels will be installed in Relay Room.) 67 Protection panel with BCU and Breaker Control Switch for 220 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 68 Protection Panel with BCU and Breaker Control Switch for 220 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, Circulating Curent Protection Relay in addition to all other Transformer HV Protection relays are to be considered in HV side Panel). 69 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 220 KV Bus Coupler complete as per Tech. Spec. 70 220 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 71 Protection panel with BCU and Breaker Control Switch for 132 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 72 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. 73 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, HV REF Protection Relay in addition to other Transformer HV Protection relays are to be considered in HV side Panel) 74 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 132 KV Bus Coupler complete as per Tech. Spec. 75 132 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open Detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 76 Protection Panel with BCU and Breaker Control Switch for 33 KV Line Feeder as per Tech. Spec. 77 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/0.415 KV Station Service Transformer (S.S.T.) as per Tech. Spec. Panel schematics will be similar to Line Feeder Panel, along with addtitional S.S.T. Supervision Relays. 78 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 132/33 KV Transformer as per Tech. Spec. 79 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/11 KV Transformer (considering HV REF Protection Relay, HV Over-current Relay and all other accessories alongwith space and provision for future Transformer Differential Relay) as per Tech. Spec. and actual requirement. 80 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both side Bus PTs) and Breaker Control Switch for 33 KV Bus Section bay as per Tech. Spec. 81 Meter Panel without meter( As per drawing uploaded) 82 XLPE Copper Cableas per Technical Specification 83 220 KV 630 Sq. mm single Core Copper Cable AL sheath forLine from Composite Tower To GIS- Single phase connection with double run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 84 220 KV 630 Sq. mm single Core Copper Cable AL Sheath for HV side of 160 MVA TransformersSingle phase connection with single run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 85 220 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) forLine bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 86 132 KV 630 Sq. mmsingle core Cu cable AL sheath (as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 160 MVA, 220/132/33 KV Transformers - Single phase connection with doublerun cable for each phase - The actual length will be decided after finalisation of LUP drawing. 87 132 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 50MVA, 132/33 KV Transformers and Line bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 88 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer - Single phase connection with double run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 89 33 KV 240 Sq.mmThree Core copper cable for three 33/11KV 6.3MVA Transformer , two 315KVA Transformer - Three Phase Connection with single run cable - The actual length will be decided after finalisation of LUP drawing. 90 11 KV 400 Sq.mm 3 coreCopper for 33/11KV 6.3MVA Transformer - Three Phase Connection with singlerun cable - The actual length will be decided after finalisation of LUP drawing. 91 Outdoor End Termination Kit/ cable sealing end and other required accessories for above XLPE cables as per requirement and specification : 92 For 220KV 630 Sq.mmsingle core copper cable for Line 93 For 220KV 630 Sq.mmsingle core copper cable forTransformer 94 For 220KV 400 Sq.mmsingle core copper cable for Line 95 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 96 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 97 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 98 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 99 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 100 Indoor End Termination Kit for above XLPEcable : Dry Plug-In type GIS Indoor Termination kitwith all its accessories complete. This includes cable connecting contact plates and cable terminal box at GIS termination of type-A, Fig -3 as per IEC 60859 with support structure and insulator as per approved drawing, technical specification /requirement as per the following cables. For 33 : Dry Heat Shrink type as per approved drawing, technical specification /requirement as per the following cables. 101 For 220KV 630 Sq.mmsingle core copper cable for Line 102 For 220KV 630 Sq.mmsingle core copper cable forTransformer 103 For 220KV 400 Sq.mmsingle core copper cable for Line 104 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 105 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 106 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 107 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 108 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 109 Generator 110 DG set 100KVA with all accessoriesas per Technical specification 111 Communication Equipment (As per technical specification, BOQ and mentioned Annexure) 112 Fibre Optic Terminal equipment ( with minimum five redundantdirections with MSP protection)/Optical Line Terminal Equipment (SDH-STM 4) for the Sub Station Reduntant Power Supply card and Control card etc. complete to meet Tech. Spec. Requirement in all respect ( should be compatible with FO equipment at BAPL,SLDC & Backup SLDC for data and voice communication and carrier aided protection). 113 E1 Interface cards( Minimum 16 interfaces/card) 114 Ethernet Interfaces10/100 Mbps with Layer-2 switching ( Minimum 8 interfaces/card) 115 Equipment Cabinets 116 Main Distribution Frame (100 pairs) 117 Pre-connectorised optical fibre patch cords as per requirement 118 E-1 Port Interfacing Cable 119 EPAX (with cabinet)To be suitable both for FO Equipment and PLCC equipment with 2 digit, 3 digit & 4 digit Station numbering facility and programmable features such as using analog telephone & Laptop with (4 x 8 nos.) Local Subscribers 120 Digital Teleprotection Coupler suitable for integration with SDH terminal equipment to communicate on G 703 (E1, 2 Mbps) with minimum eight commands as per Technical Specification requirement. 121 Telephone Receiver (2-wire) for connection with EPAX,to be installed at different rooms of GIS cum Control& office building, C-type quarter, Colony buildings, Security room at main gate and other areas as per direction of Site-In-Charge. 122 Telephone cable (armoured) for all2-wire telephones & other requirements as per specification and as per requirement 123 STP Data Cable(CAT 6) with flexible GI conduit pipe for data transfer and for connecting IP phones (placed at Control room, communication room, Sub-Station In-charges room etc.) with FO Panel 124 Two no. licensed software for configuration of SDH and DPC to be handed over in two pendrive to Communication wing 125 48V, 300AH VRLA type Battery 126 48V, 60A Battery Charger 127 48V DCDB as per technical specification 128 Integration withexisting Fiber Optic System at connecting Sub-Stationon optical channel (STM-4), in consultation with the OEM, whose equipment is installed at other end. i) for voice & data communication ii)for carrier aided protection purpose -with supply of equipment and material(SFP,Patchcord, etc) as required. Intigration of new SDH, with existing SDH at connecting substation must not affect repoting of existing SDH at NMS, for which necessay action needs to be taken. 129 SAS system (as perindicative Scheme diagram, Technical Specification and requirement) -Monitoring & Control of the Sub Station from a far end Operting Station in addition to local unit 130 Rack mounted Main Server (Intel XeonSilver 4215processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-1, for connection FO port to be considered). 131 Rack mountedStandbyServer (Intel Xeon Silver 4215 processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-2, for connection FO port to be considered). 132 Local HMI (client Terminal) with 32 Monitor (LED) 133 Remote HMI PC with monitor (32LED) and necessary software for remote control and monitoring via local substation Gateway ,shall support IEC60870-5-104and IEC 61850 protocol. Remote HMI shall 100% replication of local substation HMI in all respect . 134 MainGateway (Intel Xeon Silver 4215 processor or higher)-Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol. 135 Standby Gateway (Intel Xeon Silver 4215 processor or higher)- Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol 136 Disturbance Recorder Cum Engineering Workstation PC (Industrial Grade) withMonitors (24 size- LED) 137 1 no PC with monitor (24 size LED) and necessary software for remote end to fetch DR data from relays and to configure all relays . 138 Rack mounted complete GPS unit, to be mounted in server panels . 139 Laser Colour Printer (suitable for at least A3 size) 140 Dot Matrix Printer 141 PRP Compliant, managed 20 FO port Ethernet Switch, industrial grade. 142 SAS application software with required license (suitable for 8000 signals, with life time validity) and other relevant operating & system software for running the scheme successfully. 143 Redundant Inverter of 5KVA or higher capacity in HOT-STANDBY Mode, on220V station battery , to feed SERVER, GATEWAY, HMI, Engineers WorkStation,Monitors, Ethernet Switches, KVM Switches,Printers, MODEM/ROUTER, etc. 144 Cabling System -Multimode / Single Mode Dual Window armoured fibre optic approach cable as required with HDPE duct, Flexible GI Conduit, all other power & control cables, Jacks, connectors and any other hardware to meet functional / performance requirement. 145 LIU having minimum 12 ports. 146 Red Box having minimum 4 RJ45 & 2 FO ports. 147 Remote Monitoring & control (wherever required) of Station Auxilliary System like Fire Fighting System, Air Conditioning System, Battery System, Lighting System, ACDB, 220V & 48V DCDB,replica of annunciator with buzzer & reset arrangement,& fire fighting annunciatoretc. complete as per technical specification requirement. For auxilliary system, AUX BCU to be mounted in separate panel. 148 Premium quality Integrated Control console deskwith chairs and other furnituresfor HMI Workstations, DR PC, telephones, storing of log sheets & manuals etc. suitable for three operators 149 Data Integration with SLDC and Back up SLDC End Including programme as per technical specification and also as per site requirement by directly communication with agency engaged for AMC of SCADA at SLDC and Back up SLDC End. 150 Router cum firewall shall be provided at local end for remote data transmission . 151 Network panel and other material / equipment / accessories required for successful completion ofthe job . 152 Automated notification in the form of SMS - i) SMS is required to be sent to 5 (five) mobile numbers at a time. ii) When required, any number can be deleted or altered. For that easy interface is to be provided. A log (with user-id and time) for the same is also required to be maintained. iii) The type of disturbaces or trippings for which SMS to be sent must be cofigurable. iv) All required hardwares and softwares to establish the system is under scope of the bidder. v) ISP connection in the name of WBSETCL and any formalities (if required) is to be done by the Bidder.SIM will be provided by WBSETCL. vi) After handing over the system, any recurring charges for SIM will be borne by WBSETCL. 153 Vendor Assessed Quantities: 154 ACDISTRIBUTION BOARD(comprising of Main ACDB, Sub-ACDBMLDB,DB) complete as per technical specificationand as per requirement. In addition to incomers from 2 nosStation Transformer, and Diesel Generator, suitable incomer for Solar Roof Top plant (40 kWp capacity) is to be considered as per requirement for GIS building and 11 KV room . 155 DCDISTRIBUTION BOARD (220 V DC)complete as per technical specificationand as per requirement 156 30V DCDB (with single source) for 11 KV System as per uploaded Tech spec 157 Control cable 1.1KV grade( Cupper ) as per TECH Spec and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing . Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 158 19 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 159 16 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 160 12 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 161 8 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 162 4 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 163 5 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification.(For all CT, PT & CVT connection. For CT individual colour coded cables are to be used for individual core). 164 4 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification. 165 5 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 166 3 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 167 2 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 168 POWERCABLE-Multi Core, PVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing (Allcablesshall be of Copper only.)Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 169 1C X 500 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 170 3.5C X 185 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 171 4C X 16 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 172 4C X 25 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 173 4C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 174 4C X 35 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 175 2C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 176 1C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 177 2C X 4 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 178 ACSR CONDUCTORwith accessoriesas per Technical Specification and as per requirement 179 ACSR Moose 180 ACSR Panther 181 Earth /Shield wirefor LM down comer 182 ALUMINIUM TUBULAR PIPE (Schedule 80) as per Technical Specification and as per requirement 183 3 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 184 2.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 185 1.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 186 CLAMPS,CONNECTORS,BUNDLE SPACER, Hardware fittings & accessoriesincluding equipment connectors(SUITABLE FOR SCH. 80) and as per approved ACSR conductor as per Technical Specification and as per requirement 187 220KV System 188 132KV System 189 33 KV System 190 11KV System 191 0.4KV System 192 Solid Core POSTINSULATOR& Anti fog type Disc insulatorwithhardware fittings and accessories as per Technical Specification andrequirement 193 220KV System 194 132KV System 195 33 KV System 196 11KV System 197 ILLUMINATION SYSTEM 198 ILLUMINATION SYSTEM COMPLETE (Both Indoor & outdoor)GIS building control building switchyard periphery C type building B type buildingPump House, Security Goomty / Barrack, DG Room,other area installation including light pole with foundation worketc as per technical specificationandrequirement. Allluminaire used shall be of LED type (irrespective of the type mention in specification) and all fans shall be of energy efficient BLDC type. 199 Dehumidifier as per specification 200 Dehumidifier with suitable capacity & size for 33 KV Switchgear Roomas per approved drawing 201 Direct Stroke Lightning Protection for GIS building(considering Roof Top Solar Plant), Control builting, FFPH, as per relevant IEC. 202 Furnitures and Gadgets for Conference Room - Premium quality furnitures of reputed brand like Godrej or equivalent are to be considered. However, before procurment of furnitures and gadgets, written approval from WBSETCL site-in-charge is to be taken. 203 Conference table suitable for 30 person 204 Executive High Back chairs 205 Digital Audio / visual projector - 4K resolution, 2 nos USB 2.0 and 2 nos HDMI 2.0 ports (Preferred make - Sony, Epson, JVC, Panasonic) 206 64 or higher Interactive smart whiteboard of reknowned make 207 Meeting room Audio system (microphones - 30 nos., wall mounted speakers, amplifiers, other required hardwares & softwares) - (Make Harman, Sennheiser or equivalent) 208 Decorative dimmable LED lights (average 500 lux level) 209 High quality window blinds matching with room interior 210 AIR CONDITIONING SYSTEM COMPLETE as per Technical Specification and as per requirement (All machines must be of same make.) 211 RelayRoom and SAS Room & communication Room- Ductable Air Conditioning System is to be considered. -All machines must be ofsame make . Considering continuous operation ,machines must be of Industrial gradeand refrigerent must be of R32 or better environmental standards .as per spec 212 5star rated Split type Non-Ductable AC for Battery & Chargerroom, In-Charge Room, Conference room DB Room etcAll machines must be ofsame make . Considering continuous operation, machines must be of Industrial grade / 5 star rated split and refrigerent must be of R32 or better environmental standards as per spec 213 FIRE FIGHTING & FIRE PROTECTION SYSTEM - As per Tech spec 214 Fire hydrant system in ring formation along the periphery of switchyard covering entire portion (Entire 132 KV Switchyard &220 KV switchyard), GIS building, Control Building etc as required. 215 Portable fire extinguisher & bucket at key locations of switchyard ,control room, GIS building, office area ,residential and other building and near each Power Transformer as per Technical spec . and as per requirement. 216 Fire Alarm System (Concealed cabling is preferred ) - i) Smoke & heat detection system covering all the rooms of GIS cum Control room building ii) adequatebeam detector with redundancyfor GIS room - as per technical specification & requirement 217 CCTV Survelliance system (as perTech specification ) - The system shall be capable to integrate with central control centre. The actual quantity shall be finalised depending on the approved design . 218 Fixed Bullet camera (short range) with all accessories -as per technical specification. 219 Fixed Bullet camera (long range) with all accessories -as per technical specification. 220 Fixed Dome camera with all accessories-as per technical specification. 221 PTZ camera with all accessories-as per technical specification. 222 IP Based Outdoor Thermal Camera with all accessories as per technical specification 223 VMS management server with 30 days recording facility for minimum 40 cameras (with MS Windows professional operating system) -as per technical specification. 224 Video surveillance software and license for 40 cameras or more (which shall be valid for lifetime) -as per technical specification. 225 40 4K Display, 24 x 7 operation; as per technical specifications 226 2 KVA online UPS with 30 minute backup-as per technical specification. 227 24 Port PoE 1G Network Switch with 4 nos SFP Ports along with 1G SM SFP Modules; as per technical specifications 228 Required number of Industrial Grade 4 Port 1G Network Switch with 2 Nos. SFP Ports along with 1G SM SFP Modules; as per technical specifications 229 Media Converter, PTZ keyboard with joystick, cabinet, junction box, POE injector, LIU, power supply, Indoor floor mount rack, outdoor rack, clamp, connector and hardware for camera fixing etc. -as per technical specification. 230 All types of armoured fibre optic cables, CAT 6 cables, armoured copper cables, HDMI cable, HDPE conduits, PVC straight pipe and accessories etc. required to complete the system-as per technical specification. 231 Computer Table, rolling Chair, additional mounting pole and Other tit-bit materials not specified above but required for successful completion of CCTV surveillance systemas per site requirement. 232 NEXT GENERATION FIREWALL/ CYBERSECURITY GATEWAY and all required hardwares & software for integration with remote Control Command & Centre AS PER TECHNICAL SPECIFICATIONS. 233 One additional viewing unitsat In-Charge Room with all required hardware and software 234 SUBSTATION EARTHING SYSTEM : As per Technical specification 235 32mm dia or higherMS rod for main earthmat grid,corner mesh and periphry for outdoor switchyard . The actual quantity shall be finalised depending on the approved design (Only design quantity with lap length without any wastage for main mat, periphry& corner mesh will be considered for payment.) The Earthmat design is to be done considering earth resistivity of 30 Ohm-m oractual measured value whichever is higher. 236 32mm dia or higherMS rod for riser below and aboveground auxiliary Mat fencing and gate earthing bending length and overlapping length as per requirement & as per approved drawing 237 GS flat for riser above ground / cable trench & other areas.Rod/pipe electrode , test link and other materials etc. - as per requirement, technical specificationand approved design/layout including earthpit. 238 Earthing for GIS enclosure and GIS building as per manufacturers recommendation including civil work. 239 Earth Link Box, SVL, Earth Strip, earth continuity cable for single bondwherever required for Earthing of allXLPE Cablecomplete at cable conductor junction point etc as per technical requirement / as per approved drawings. 240 Earth Strip and other accessories including lugs for link box etc wherever required for Earthing of allXLPE Cablecompletei as per technical requirement / as per approved drawings. 241 3 ph Earth Link Box with SVLas per technical requirement / as per approved drawings. 242 3 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 243 1 ph Earth Link Box with SVL as per technical requirement / as per approved drawings. 244 1 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 245 6.6 KV/3.8 KV Copper Bonding Cableas per technical requirement / as per approved drawings. 246 1.1KV Grade 240 sqmm CopperEarth continuity Cableas per technical requirement / as per approved drawings. 247 GRID CONNECTED ROOF TOP SOLAR POWER SYSTEM (As per Technical Specification) 248 5kWpSolar Roof Top plant (at the roof of GIS & Control building) having high quality mono. crystalline type solar PV module from reputed brand (as mentioned under WBSETCL Makers list), Mounting structures (Fixed Type) with Civil pedestals including civil work as per requirement. 249 i) High quality inverter from reputed brand as mentioned under WBSETCL Makers list) suitable for 40kWp solar roof top plant. ii ) All other required accessories- Data logger with CPU, LCD monitor, UPS,Metering,Junction box & distribution boxes, Type-II Surge protective device, string monitoring uints, pyrano.meter with sensors, all Cables, hardware, earthing & lightning protection materials, required furnitures & cabinets, conduits etc. to complete the system of 40kWp grid connected plant 250 Essential spares necessary for operation, routine maintenance and testing of equipment supplied for 3 years to be covered under Annual Maintenance Contract. 251 MISCELLANEOUS ITEMS -As per Technical specification 252 i) Glow signboard for name of the substation- minimum size 50 sq ft, ii) schematic SLD on glow signboard iii) Danger plate, phase plate, bay nameplate etc iv) Statutory caution boards made of mild steel of 250 mm x 200 mm and at least 2 mm thick and vitreous enamelled, white on both sides and with inscription in signal red colour on front side as required. v) Shock treatment chart in local and English language duly mounted on wooden frame with glass as required vi) Safety Slogans - to be put up in Offices and Sub-station premises (Site-in-charge may select the slogans from WBSETCL Safety Manual, Version 2.0, Page 18)vii) WBSETCLLOGO & Sub-Station Nameat main gate of Sub-Station entry with good quality durable materials 253 Ferrules & lugs, GI conduit, Cu flexible wires for panel earthing etc. 254 .Angle, Channel and other hardwares for installation of panels, DBs etc. 255 Supply of itemsfabrication marker, tags,Protection cover tiles, PVC warning tape, route marker, jointing marker, clamps connector etc as per specification & approved drawing 256 Trefoil clamp suitable for approved XLPE cable 257 Bay marshalling kiosk, dummypanel, junction box, , Lighting & other Distribution Boards etc. As per requirement& as per Technical specification 258 Bay marshalling kiosk, 259 Dummypanel, 260 Junction box, (CT,PT,CVT as per requirement 261 Distribution Boards as per requirement 262 Cable Tray (Ladder type & perforated type etc ) as per requirement for indoor cable trench and and as per requirement within GIS building 263 Industrial type Exhaust Fans and mechanised louvers of required quantity for 220KV & 132KV GIS Hall, 33 KV indoor switchgear& 11 KV Switchgear Room as per requirement & as per Tech Spec 264 HDPE Pipes 265 200 mm Dia 266 150 mm Dia 267 One storage type RO + UV + UF water purifier for office building 268 Spares:- Spare relays including test jack are to be delivered after duly tested at CTD WBSETCL on chargeble basis. All materias will be as per scheme of this project ) 269 Distance Protection relay (as approved at 220 KV Line bay for Main-1 potection) 270 Distance Protection relay (as approved at 220 KV Line bay for Main-2 potection) 271 Distance Protection relay (as approved at 132 KV Line bay for Main-1 potection) 272 Distance Protection relay (as approved at 132 KV Line bay for Main-2 potection) 273 Transformer differential Relay(same as approved for 220 KV Transformer bay) 274 Transformer differential Relay(same as approved for 132 KV Transformer bay) 275 BCU (same as approved for 220KV bays ) 276 BCU (same as approved for 132KV bays ) 277 BCU (same as approved for 33KV bays ) 278 BCU (same as approved for auxilliary system) 279 PRP Compliant, managed Ethernet Switch, industrial grade. (same as approved for SCADA Systeml) 280 Over Current& Earth fault Relay 281 Bus Bar Differential Relay (One Central Unit and one Peripheral Unit) 282 Trip Relay 283 VT selection Relay 284 Spares: Spare are to be delivered at nearest store in consultation with in charge All materias will be as per scheme of this project. 285 220KV GIS Circuit Breaker complete mechanism 286 220KV GIS Disconnector complete mechanism 287 220KV GIS High speed earth switch complete mechanism 288 132KV GIS Circuit Breaker complete mechanism 289 132KV GIS Disconnector complete mechanism 290 132KV GIS High speed earth switch complete mechanism 291 33KV CT - same as supplied for Line bay 292 33KV CT - same as supplied for 50 MVA Transformer bay 293 Safety Equipment 294 Full Body Safety Harness with Twin rope lanyard, length < 3 meter with waist belt and accessories as per IS - 3521 295 First aid box complete with all items (as perAnnexure in line with WBSETCL Safety Manual, Version 2.0) - to be placed at Control Room & Maintenance Room 296 Discharge cum earthing rod - Highly insulated FRP telescopic type with all accessories suitable for 245 KV system or higher,CPRI type tested as per IEC - 1230:1993 & IEC - 1235 with tested epoxy earthing rod for 10 KV /ft for 1 min as per IEC- 855 297 Safety Helmet - Made of Polyethylene/ glass fibre reinforced with head band, cradle, strap fittings with withstanding temp of 50oC as per IS – 2925 (Suitable stand / Racks are to be provided to store the helmets. Helmets are to be colour coded for visitors, technical staff and others) 298 Gum Boot made of Rubber (Suitable stand / Racks are to be provided for storage.) 299 Renowned make High Voltage Detector - Suitable for 11 KV to 245 KV , 50 HZ system with sensing level 1 mtr. for 132/220/ 400 KV system complete with HV probe, 5.0 mtr telescopic insulation stick with visual LED and Buzzer indication as per IS - 13771/ IS - 2071 300 Safety shoes - Double density PU sole, leather with hard Toe cap, Non-woven Eva lining, anti static /electric shock proof Insole (with minimum electrical resistance and high voltage of 18 KV), conforming to IS – 15298 301 Hand Gloves - Made of soft quality rubber, seamless latex, shock proof, for electrical purpose suitable upto33 KV -system as per IS - 4770 302 Electric Arc Protection Suit - FR suit compatible to wearwith hood, jacket, face shield, trouser etc complaint with NEFA- 70 E standard as per IEC - 61482-1-1-2007/9 303 Insulating mat - High density insulating matsasper IS - 15652 with ac(rms) kv 3.3, sizes of rolls 5000 mm X 1000 mm (to cover entire operating length of 33KV switchgear, DB room & Panel room) 304 Safety Ladder - Single step self supporting type with complete Fiber glass, 3 inch wide, antiskid fibre steps, non - slip fibre glass shoes with thick rubber pad, Height 8 ft 305 Safety Torch / Search Light - Body:- Fibre glass, PCB - glass epoxy to meet all weather condition, Circuitry - IC Control, Charge -220 Volt AC, Light Source - 12 V Halogen Bulb, 55 watt, Power source - 12 volt, 7 AH sealed battery, Extra jack tobe provided for direct lightning by 12 volt DC, Continuous run - 2 hr High beam Rechargeable Hand Held Search light 306 Lifting Rope - Hemp Rope / Sisal Rope / Manila Rope - One inch dia., 30mtr long 307 Passenger Elevator (6 person capacity, ) - For GIS & Control buildingcomplete in all respect as per technical specification and as per requirement. 308 Industrial grade Vacuum Cleaner of reputed make 309 Civil Part: 310 Supply, fabrication, galvanisaton of variousswitchyard & equipment structures,LM-Lattice type ( 35Mtr or 50 Mtr-based on DSLP Calculation), XLPE cable supporting structure completeas per approved electrical layoutdrawings and technical specification (Electrical & civil) and as per requirement complete. (including Nuts & Bolts and foundation bolts) 311 Switchyard Structures including Nuts & Bolts 312 Foundation Bolts for switchyard structures including nuts, washers and anchor plates (Foundation Bolts shall be galvanisedupto threaded length from top) 313 Supply, fabrication of various structures (MS FLAT, MS Plate, Insert plate, Angles, Transformer Rail, Channels, ISMB, Chequred plate, MS grating for GIS Building, Transformer, Cable trench , drain etc. as per approved drawings, technical specification (Electrical & civil) andrequirement complete.
Contract Date: May 11, 2026 Contract Value : 242.30 Crore
Government Departments No of Bidders 3
West Bengal View Result →
34.
Power #11047679 Technical Bid
Tender for Purchase Of Furniture For New Created Satanwada Dc, (O&M) Dn. Shivpuri-I. Under Jurisdiction Of General Manager (O&M) Mpmkvvcl,Shivpuri. , Furniture For New Created Satanwada Dc, (O&M) Dn. Shivpuri-I , Officer Table :- Providing And Supplying Table Of Size 6X4X26 With C-Frame Leg 200 Mm Wide Made Of Aluminum Profile And Crca Formed Section Having Provision For Wire Management. Top Made Of 18 Mm Thick Bwr Plywood Finish With 1.0 Mm Thick. Laminate, Wooden Edge Banding Of Edges. Dotted Embossed Cable Duct And With Single Drawer (W-350 Mm, H-165 Mm, D-475 Mm) With Branded Telecopic Channel. All Steel Components Are Epoxy Powder Coated After Seven Tanks. Anti-Corrosion. , Officer Chair :- Supply And Placing High Back Revolving Chair Size Total Height - 1030-1115 Mm, Depth 685 Mm Width 590 Mm Seat Hight 425-510 Mm, 5- Prong Nilony Base For Stability Twin Wheel Heavy Duty Caster For Easy Mobility Under Load - Hot Pressed Plywood With Steel T-Nuts For Rigid Fasting Seat And Back Are Covered With Pp Cover, Sturdy Steel Colum Gas Lift For Center Support And Seat Height Adjustment, Telescopic Abs Cover Over Steel Colum Low Cable Center Tilt Mechanism And With Single Piece Integral Center Tilt Mechanism And With Single Piece Integral Skin Pu Arm Rest, Quality Tapestry High Density Molded Pu Cushion. , Staff Table :- Providing And Supplying Table Of Size 5X26 X26 With C-Frame Leg 200 Mm Wide Made Of Aluminum Profile And Crca Formed Section Having Provision For Wire Management. Top Made Of 18 Mm Thick Bwr Plywood Finish With 1.0 Mm Thick. Laminate, Wooden Edge Banding Of Edges. Dotted Embossed Cable Duct And With Single Drawer (W-350 Mm, H-165 Mm, D-475 Mm) With Branded Telecopic Channel. All Steel Components Are Epoxy Powder Coated After Seven Tanks. Anti-Corrosion. , Staff Chair :- Supply And Placing Staff Chair Size Total Height 850 Mm Depth 570 Mm, Width 550 Mm Seat Hi=Eight 440 Mm, Uinder Structure Cantilever Type Ms Crca Tube 1.6 Mm Thick. Hot Pressed Plywood With Steel T-Nuts For Rigid Fastening. Single Piece Integarl Skin Pu Arm Restoration Quality Tapestry. High Density Pu Molded Cushion. All Steel Components Are Epoxy Powder Coated Followed By Seven Tanks Anti Corrosion Treatment Of Surface. , Computer Table :- Supply And Fixing In Position Computer Table (Work Station) Having Size - Length 900 Mm, Width 600 Mm, Height 760 Mm, C-Frame & Tubular Crca Steel Structure, Fabrication Involves Only Mig/Tig & Spot Welding. Top & Shelf Made Of 18 Mm Thick Bwr Plywood Finish With 1.0 Mm Thick. Laminated, Wooden Edge Banding Of Edge, Shelf Adjustable On Steel Brackets. Removable Tubular Cpu Stand And An Embossed Modesty Panel Below Table Top Provided. Provision For Wire Management, Drum Type Leveler. All Steel Components Are Epoxy Powder Coated After Seven Tanks Anti Corrosion Treatment Of Surface. , Plastic Chair:- Plastic Arm Chair For Office , Godrej Almira :- Godrej Interio Almira Slim Size 2 Door Steel Almira, 4 Shedves, Size Length 1828 Mm, Width 914 Mm , Cash Counter:- Office Reception Table & Cash Counter Desk Of Wooden Product Dimensions Length 48 , Width 24 , Height 36 Approx. , Record Rack :- Material- Mild Steel No. Of Shelves- 5 Shelves Mount Type- Finish Type Color- Grey Usage/Application- Office Rack Type- Open Rack Appearance- Modern Product Type- Pre Standing Unit Assembly Required- No , Water Cooler :- Cooling Capacity- 5 Ltr./Hr. Number Of Taps- 2 Color- White Weight- 10 Kg. , Wall Mounted Steel Locker (Godrej) With Dual Key Locking System Made Of Crca Steel With Epoxy Power Coated Finish , Heavy Gauge Body With Internal Self/Tray Size Approx. 800X600x300 Mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
35.
Public Administrative Department #11014465 AOC
Tender for Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.In The Existing Trench, Complete As Required. 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying And Fixing Of Light Class Gi Pipe Of 50 Mm Dia (Nominal) 3 Meters Length Along The Pole For Protection Of Under Ground Cable As Required. , Excavation Of The Cable Trenches In Hard Rock Not Exceeding 1.5 Meters In Width, And Lift Upto 1.5 Meters, Including Getting Out The Excavated Soil And Disposal Of Excavated Soil As Directed Within A Lead Of 50 Meters. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C X 6 Sqmm , Providing And Fixing Stainless Steel Name Plate Of Size 6×8 Sq Inch Made Of 20 Gauge Sheet Including Engraved Name Of Area Representative Duly Painted Along With Ss Clamp Nut Bolt Etc As Required. , Fabrication, Supplying And Fixing Class B Galvanised Single Overhang Arm Bracket Made Out Of 250Mm Long Galvanised Top Tube With Cap And 1000Mm Long 32 Mm Dia Galvanised Pipe With Tightening Bolts Complete As Required , Fabrication, Supplying And Fixing Class B Galvanised Double Overhang Arm Bracket Made Out Of 250Mm Long Galvanised Top Tube With Cap And 1000Mm Long 32 Mm Dia Galvanised Pipes With Tightening Bolts Complete As Required. , Supply And Fabrication Of Pole Protection System Made Up Of 8 Swg Steel Wire Mesh Of Size 25Mm X 75Mm Rectangular With 50Mmx50mmx6mm Ms Angle Iron For Supporting The Mesh I/C Mv Danger Plate And Grounding The Protection System In Suitable Quality Of cement concrete Etc As Reqd. , Providing And Laying In Position M25 Grade Reinforced Cement Concrete Foundation Of Size 450 Mm(L) X 450 Mm Wide And 1000 Mm Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Rewinforcement Of Cold Twisted Bars Of 12 Mm Dia -960Mm Long (Approx.) - 8 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 1400 Mm (Approx.) - 6 Nos. (With 150 Mm Spacing) As Required With Supplying And Positioning Of 4 Nos Foundation Bolts Of Size 16 Mm Dia And 600 Mm Long, J Type I/C 2 Nos Template Anchor Plates Of Size 225 Mm X 225Mm X 3 Mm And Providing 63 Mm Dwc Hdpe Pipe For Cable Entry & Exit As Required For 5Mtr Pole , Fabrication, Supply & Erection Of 5.0 Mtr Height, Minimum 3 Mm Thick, Bottom Dia Of 130Mm & Top Dia Of 70Mm, Base Plate Of Size 225 X 225 X 12 Mm Thick Flange Mounted Hot Dip Galvanized Octagonal Pole Made From Ht Steel Plate, Window With Flash Cover With Full Vertical Window Cover At Appropriate Height From The Base Plate On Existing Cement Concrete Pedestal As Required. L/C Supplying And Fixing Of 6 Mm Thick Laminated Mounted Sheet Inside The Window And L/C Providing And Welding 3 Nos. Gi Strips 4 Mm Thick Of Suitable Length And Having Suitable Size Tapped Holes As Reqd, Terminal Block Suitable For 25 Sq Mm Conductor - 4 Nos. & Shorting Links On Din Channel L/C Providing And Fixing Din Channel Of Suitable Length, 6 Amp. Spmcb C Curve Characteristics, Earth Stud, Cable Support Clamp Suitable For Upto 4X25 Sqmm Cable. Logo/Name Of Manufacturer Shall Be Either Embossed Or Rivited Plate On The Pole. Galvanization As Per Relevant Is Code Etc As Required , Fabrication, Supplying, Installation, Testing, Commissioning Of 12 Metres Semi High Mast System With Its Accessories, Mast Shaft Shall Be In One Section, Hot Dip Galvanized 4Mm Thick(Single Dip) Inside & Out Sides &Sultable For Wind Velocity As Per Is 875 Part3.There Shall Be In Longitudinal Seam Weld Per Section And No Circumferential Weld. It Should Also Included Accessories For Seml High Mast Head Frame,2 Point Suspension System,5 X 2.5 Sqmm Copper Conductor With Steel Wire Rope 5Mm Dia. (7/19 Construction) Single Drum Winch ,Galvanized Lantern Carriage Arrangement Suitable For 4/6 Nos. Flood Light Luminaries Symmetrically And Its Control Gears Boxes And Lighting Finial, The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panel Housing Suitable Reinforced Cement Concrete (1:2:4) Shallow Foundation Of Size 1M(L) X 1M Wide And 2M Deep I/C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100Mm Long (Approx.) 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia 3700 Mm (Approx.) 13 Nos. (With 150 Mm Spacing) As Required With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For The Semi High Mast Considering The Safe Soil Bearing Capacity At Site As 10T/Sqm At 2Mts. Depth With All Material I/C 4 Nos S.P Mcb,1 No. Double Pole 16Amp. Mcb Etc As Reqd. Logo/Name Of Manufacturer Shall Be Either Embossed Or Rivited Plate On The Pole. Galvanization As Per Relevant Is. , Providing And Fixing Name Board Made Of Ms Sheet 90X60cm, 1Mm Thick With Frame Of Ms Angle 50X50x6mm, Two Diagonal Braces At The Back Of The Sheet Of Ms Flat 40X6mm, Total Height Of The Board Above Ground Level 2.40M, Length Of Legs Below Ground 0.30M Embedded In Cement Concrete Block 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20Mm Nominal Size) 30X30x45cm Including Excavation And Removal Of Surplus Earth With In 50M Lead, Applying Priming Coat Of Approved Steel Primer, Painting With Synthetic Enamel Paint Of Approved Quality And Lettering With Enamel Paint Of Approved Colour (One Side) As Per Drawing/Direction Of Engineer-In-Charge , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy ≥135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminum Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Freq 50/60 Hz, Operating Temp Range -5 Deg Centigrade To 50 Deg Centigrade, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-45, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2 , P. F.≥0.95, Ip66,Ik-10, Cri ≥70 , Under Voltage And Over Voltage Protection,Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report , Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) , Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminum Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Led Flood Light, Powder Coated Pressure Die Cast Aluminum (System Lumen Efficacy ≥135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminum Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Freq 50/60 Hz, Operating Temp Range -5 Deg Centigrade To 50 Deg Centigrade, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2 , P. F.≥0.95, Ip-66,Ik-10, Cri ≥70 , Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led,Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report , Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminum Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 100W
Contract Date: Jun 11, 2026 Contract Value : 40.54 Lakh
Local Bodies No of Bidders 3
36.
Defence #10969895 Price Bid
Tender for Dismantling Water Tanks Exc 500 Ltr But Not Exc 1000 Ltr And Removing To Store Or Issued To Contracror Under Sch Of Credit Complete All As Specified And Directed. , Taking Up Or Down 25 Or 32 Mm Dia Steel Tubing And Connections, Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Down Shutters Of Any Description Exc 2 Sqm Of Doors Each Complete All As Specified And Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Un-Reinforced) In Ground Floors And Pavings N Exc 15 Cm Thickness (Below Or Above Ground Levelr All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And In Any Position Not Otherwise Specifically Provided For All As Specified And Directed. , Dismantling Of Plain Or Corrugated Steel Sheeting Any Gauge, Thickness As In Roof Covering Complete All As Specified And Directed , Use And Waste Flat Form Work To Vertical Faces Of Drain/Retaining Wall And Similar Work . , Taking Down Chowkats Or Frames With Shutter (Without Taking Off Shutter From The Frame) Not Exc 1.50 Sqm Each Including Iron Mongeries Complete All As Specified And Directed. , Material And Labour For Providing Cement Concrete 1:2:4 Type B-1 Using 20 Mm Graded Aggregate ) In Plinth Walls Or Retaining Walls,Drain Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Bases) , M&L For Cement Concrete Type B-2, 1:2:4 (Using 40Mm Graded Agg) As In Surface Channels And Drains Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms, Moulds, Mi- Tred/Stopped Ends Etc , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing. Complete All As Specified And Directed By Engr-In-Charge. , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fix 30Mm Thick Single Piece, Coloured Abc (Acrylonitrile Brutadine Styrene) Coated, Puf Filled Door Shutters With Puf (Poly Urethanefoam) Insulation Of Minimum Density 40 Kg/Cum Filled In Between Two Abs Sheets Of Thickness 1.2Mm (Min), Border Covered With Insitu Pasted Abs Strips Of Width Equal To Thickness Of Door Shutters, 1.2Mm Thickness, Reinforced With Two Number 10Mm Ctd Bars, PreEmbedded With Wooden Blocks Of Suitable Sizes For Receiving Hinges, Tower / Sliding Bolts, Towel Rails, Handles Etc, With/Without Embossed Pattern Completed All As Specified And Directed. , S&F 150Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 300Mm Mild Steel Sliding Door Bolts, Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Galvanised Mild Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm And Fixed With Tinned Tacks, Or Galvanised Wire Staples , S&F Powder Coated Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified , S&F Powder Coated Anodised Aluminium Window And Ventilator Shutters Powder Coated (Min Thickness 50 Micron), Fixed Type Without Sash Bar, Aluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws Etc. Complete All As Specified , M&L For Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified , M&L For Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified , S&F Tank Connector With All Fitting Suitable To 32Mm Dia Ppr Pipe Complete All As Specified And Directed. , S&F In Repair 32Mm Dia Waste Pipe For Whb/Sink Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Angle Valve, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle And Fixedcomplete All As Specified And Directed. , M&L For 75Mm Thick Plain Cement Concrete Type C-2, 1:3:6 (Using 40Mm Graded Stone Agg) As In Plinth Protection Complete All As Specified And Directed. , M&L For 40 Mm Thick Plain Cement Concrete Type B-1, 1:2:4 (Using 20Mm Graded Stone Agg) As In Sub Base, Floors And Pavings Complete All As Specified And Directed. , M&L For Non-Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square/Rectangular) Area Of Each Tile Exc 0.06 Sqm But Not Exc 0.11 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Joint Free Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exc 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed. (Note: Colour And Pattern Of Tile Will Be Decided By Ge/ Engr-In-Charge. Contractor Will Brought The Tiles Only After Approval Of Colour And Pattern By Ge/Engr-In-Charge). , M&L For Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces With Cm 1:4 Complete All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , M&L For Preparing Plastered Or Unplasterd Newly Surface Of Any Description With Three Coat Of White Wash On Walls Surfaces. , Supply And Fix Sheet Glass 4Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N.Exc 0.50 Sqm In Each Pane, Complete All As Specified And Directed. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , S&F 32Mm Dia 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or Infloors Etc. Complete All As Specified And Directed. , S&F 25Mm Dia 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. Complete All As Specified And Directed. , S&F 32Mm Dia Pp-R Gate Valves (Brass Insert) As Per Requirement Of The Site Complete All As Specified And Directed. , S&F 750 Ltrs Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Complete All As Specified And Directed. , S&F 1000 Ltrs Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Fancy Type Bib Taps, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F Waste Coupling Of Ptmt (Half Or Full Threaded) (Minimum Weight 32Mm - 45Gms/40Mm-60 Gms) Complete All As Specified And Directed. , S&F Repairs Grating Doom 100Mm Dia Of Ptmt (Minimum Weight 25Gms) Complete All As Specified And Directed. , S&F In Repair Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600Mm Complete All As Specified And Directed. , S&F In Repairs Vitreous China Squatting Pan, ‘Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe) Squatting Pan Including Connection To Trap, And To Flushing Pipe, Anti-Syphonage Pipe, Etc. Complete Including Making Good To Floor Complete All As Specified And Directed. , S&F In Repairs Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Bracket High Or Low Level Fluslhing Cistern (Exclusive Of Brackets), And Connections To Pipes And Fixing Of Chain And Pull, Or Lever, If Any Complete All As Specified And Directed. , S&F In Repairs Vitreous China Wash Basin, White, Flat Back, Size 550X400mm Excluding Taps, Waste, Chain And Plugs But Including Brackets Complete All As Specified And Directed. , Supply & Fix Aluminium Anodised Barrel Tower Bolt 150 Mm Long Of Extruded Section Etc Complete All As Specified And Directed. , Supply & Fix Aluminium Alloy, Anodised, Sliding Door Bolts 250Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets , Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed Etc Complete All As Specified And Directed. , Supply And Fix Ms Butt Hinges Medium Weight, Cold Rolled 100Mm Size Complete All As Specified And Directed. , Supply & Fix Extruded Aluminium Anodised Alloy Handles Fabricated Type 150Mm Long Complete All As Specified And Directed. , Taking Down Copper/Aluminium Point Wiring (Light, Fan, Socket Or Power) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting Etc. Removing Materials To Store For Keeping In Safe Custody Or For Taking Credit (Credit For Above Items Should Be Made As Per Conditions Separately) And Making Good Disturbed Surfaces Of Walls, Floors, Etc. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: -One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Socket Outlett 2 In 1, 3 Pin, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 100Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 4 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , M&L For Sub Main Wiring With Two Single Core Pvc Insulated Of Size 6 Sqmm Frls Unsheathed Copper Conductor 1100 Volt Grade Multistandard And Incl Drawn Through And Including Pvc Casing Caping Including 6.0 Sqmm Frls Copper Wire For Earth Continuity Wire And Connected Of Common Earth Dolly Including Taking Down Old Unserviceable Sub Main Wiring And Making Good Of Existing Surface. Note:- (I)One Run Of Pvc Casing Caping, Two Run Of 6 Sq Mm Copper Conductor & One Run Of 6.0 Sq Mm Copper Conductor Is Measured As One Unit. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- Havells, Legrand, Indo Asian , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipe, 1100 Volts Grade Heavy Duty Cable With Pvc Insulated Aluminium Conductor Served With Aninner Sheathing Of Pvc Tape Armoured With Galvanised Steel Wire Or Tape And Overall Pvc Sheathed 6 Sq. Mm Nominal Cross Section In Service Connections , Supply And Fix Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz, Rpm 1200, Copper Winding Of Sweep 300M Complite All A Specified And As Directed By Engineer-In-Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 10 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , M&L For Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation Of Poles, Etc. Or For Laying Of Cable, Pier Holes, Etc. Nexc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft And Loose Soil , M&L For Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Of Hard & Dense Soil , M&L For Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Of Any Type Of Soil , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
37.
Educational and Research Institute #10940962 Price Bid
Tender For 9th Convocation Ceremony (VVIP Program) at JRDSU Chitrakoot Providing and erection of waterproof German hanger along with associated works for inaugural function of New Civil Enclave.-1.00 Providing and erecting waterproof German Hanger pandal made of toughened aluminum alloy casted into sections joint together to form a V shape structure with specially designed 3 layered weather/waterproof PVC fabric of white color which are fire retarted and heat proof tightened by industrial ratchets etc. complete as per the direction of Engineer-in-Charge. 2.00 Providing and fixing of stage to accommodate 20 to 30 dignitaries. Stage shall be made of Heavy Iron Base and required Ply Platform on top surrounding with SS Railing, 2 staircase each with landing and side ramp with podium & railing (Size 35 ft. x 60 ft.) complete as per the direction of Engineer-in-Charge. Safety certificate/undertaking of the Dais to be given by the agency. 8.00 Providing and fixing of complete Swiss cottage for WIPS with AC, Fan, Urinals, matting, furniture etc. with generator and fuel. 16ft x 24ft complete as per the direction of Engineer-in-Charge. 4.00 Providing and erecting Pagoda for Buffet Area all complete as per direction of EIC.. 5.00 Providing Media Manch size (12 ft. x 20 ft.) all complete as per direction of E.I.C. 8.00 Providing and fixing of WIP stage cushioned chair with cover all complete as per the direction of Engineer-in-Charge. 7.00 Providing Center Table for Stage and VIP seating area all complete as per direction of E.I.C. 8.00 Providing and fixing of two seater sofa all complete as per the direction of Engineer-in-Charge. 9.00 Providing and fixing of cushioned chairs with cover all complete as per the direction of Engineer-in-Charge. 10.00 Providing and fixing of molded PVC chairs for public audience laid into blocks of row & columns in the part of pandal complete as per the direction of Engineer-in-Charge. 11.00 Providing and fixing of Mujo Banicading for pandal äréa as per the seating plan & security requirement all complete as per the direction of Engineer-in-Charge. 12.00 Providing and fixing of good quality carpet for stage, pandal area and Apron to New Terminal Building. 13.00 Providing suitable lighting arrangement for pandal & adjoining area and suitable nos. of Generators (noiseless) for operating electric and related equipment with fuel with 8 Hr. of Backup for the entire event complete as per the direction of Engineer-in-Charge. 14:00 Providing, fixing and operating Air-condition tower of suitable capacity for Stage and VIP dining area with all accessories complete as per direction of EIC. 1500 Providing & fixing with operating Air desert cooler with all accessories complete as per direction of EIC. 16.00 Providing pedestal fans (noiseless) as per requirement: different locations complete as per the direction Engineer-in-Charge. 17.00 Providing Fresh flower decoration, cut flower and seas decorated flower in front of gates, main stage, rar staircase, podium, and backdrop center table etc. arrangements of required nos of bouquets for dignitar on Dais, and during reception and for New Termi Building decoration all complete as per the direction Engineer-in-Charge. 18.00 Arrangement of sound system with JBL VTX, JBL SR stage monitor with sufficient number, speaker box, to speaker box amplifier, high power amplifier podium se microphone on WIP stage and electronic media stage horn speakers throughout the pandal, transformers wit cabling, earthing etc with emergency battery backu complete as per the direction of Engineer-in-Charge. 19.00 Providing and fixing high contrast LED projection liv display on stage for better vision to audience in panda area (size 10ft. x 30ft.) all complete as per the direction a Engineer-in-Charge. 20.00 Providing and fixing of outdoor high contrast LED projection live display for better vision to audience in pandal area (size 10ft. x 10ft.) complete as per the direction of Engineer-in-Charge. 21.00 Providing of high resolution still photography & videography and submission of softcopy all complete as per the direction of Engineer-in-Charge. 22.00 Providing professional Anchor / Compare along with supporting staff for management of the entire inaugural function, all complete as per direction of Engineer-in-Charge. 23.00 Providing Inaugural lamp with all required paraphernalia i.e. wicks, oil, camphor, candles, match box and good quality tray etc. complete as per the direction of Engineer-in-Charge. 24.00 Making all arrangements for Flex Branding of minimum size 10 x 12 at locations finalized by A.A.I. 25.00 Provision of Catering along with Lunch, tea/coffee & seating arrangement for invited guests by providing round tables with cover, VVIP chairs with cover, Buffett tables for 500 guest complete as per the direction of Engineer-in-Charge. 26.00 Providing drinking water arrangement, serving by deploying trained personnels and maintaining decorum complete as per the direction of Engineer-in-Charge. Water bottle 1000 ml 500 nos., water bottle 500 ml 250 nos. water bottle 250 ml 1,000 nos. and water jar 20 ltr 250 nos. with dispenser base along with suitable number of glass and stand / table. 27.00 Complete fire fighting arrangement for main pandal and surrounding area with manpower i/c obtaining of necessary fire clearance from statuary authority complete as per the direction of Engineer-in-Charge. 28.00 Providing dustbins ensuring proper cleaning and garbage 1 disposal time to time by deploying required manpower and material, room freshener, napkin, hand towel, parking lots. seating area indicator, name plate area for dignitaries complete as per satisfaction of EIC 29.00 Providing bio-toilets for public i/c maintaining hygiene and 6. sanitization by deploying required manpower and material complete as per satisfaction of EIC.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
Uttar Pradesh View Result →
38.
Educational and Research Institute #10910485 Technical Bid
Tender For Supply, Installation, Testing And Commissioning Of Public Address System At Kuttambalam, Kerala Kalamandalam , Supply, Installation, Testing And Commissioning Of Public Address System At Kuttambalam, Kerala Kalamandalam (Before Quoting The Rate, The Bidder Shall Carefully Read The Conditions In The Nit And The Accompanying Special Conditions.) The Rates Quoted Are All-Inclusive And Include A Comprehensive Annual Maintenance Contract For One Year After The Oem Warranty Period Of Two Years.) The Reference Make And Model Mentioned Are Provided Solely To Indicate The Required Technical Specifications And Performance Standards Of The Item To Be Supplied. Bidders May Offer Any Approved Make, Provided That Such Products Fully Comply With Or Exceed The Specified Technical Parameters And Quality Requirements. , Powered Line-Array Loudspeaker Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Two-Way Self-Powered Line-Array Loudspeaker Module Suitable For Live Sound Reinforcement, Auditorium, Touring, And Fixed Installation Applications, Incorporating Dual Low-Frequency Neodymium Transducers Of Approximately 6-7 Inches Each And A High-Frequency Compression Driver With Waveguide, Driven By Integrated Class-D Amplification With Built-In Dsp Processing For Crossover, Equalization, Delay, Limiting, And System Protection. The Loudspeaker Shall Deliver Continuous Power Handling In The Range Of Approximately 500-800 W Or Higher, Maximum Sound Pressure Level Of Not Less Than 130 Db Spl, Usable Frequency Response Extending Approximately From 60 Hz To 17 Khz Or Wider, And Horizontal Coverage Of About 100°-120°, Suitable For Scalable Vertical Array Deployment. The Enclosure Shall Be Of Rugged, Tour-Grade Construction With Integrated Rigging Hardware Enabling Safe Suspension Or Ground-Stacked Line-Array Configuration, And Shall Include Balanced Audio Input/Output Connectivity, Network Or Software-Based Control/Monitoring Capability Where Applicable, Power Cabling, Flying Accessories, And All Necessary Mounting Hardware Required For Complete System Deployment. The System Shall Be Fully Compatible With Professional Subwoofer Systems And Digital Audio Infrastructure, And Shall Be Supplied Complete With All Accessories, Interconnections, Documentation, Installation, Alignment, Testing, And Commissioning, Ensuring Uniform Coverage, Phase Coherence, Safe Rigging Compliance, And Noise-Free Operation In Accordance With Approved Technical Standards And Site Requirements. Reference Make & Model: Jbl Srx 906La Jbl Professional / Rcf / Db Technologies / Qsc / Wharfedale Pro , High-Power Powered Subwoofer Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Low-Frequency Subwoofer System Suitable For Live Sound Reinforcement, Auditorium, Touring And Fixed Installation Applications, Incorporating A Minimum Single 18-Inch High-Excursion Low-Frequency Transducer Housed In An Acoustically Optimized Enclosure And Driven By Integrated High-Efficiency Class-D Amplification With Built-In Dsp Processing For Crossover, Equalization, Delay, Polarity Control, Limiting, And Comprehensive System Protection. The Unit Shall Deliver Continuous Amplifier Power Of Not Less Than Approximately 1000 W Rms (Or Higher), Maximum Peak Sound Pressure Level Of Not Less Than About 130 Db Special And Usable Low-Frequency Response Extending To Approximately 35 Hz Or Lower, Suitable For Integration With Professional Full-Range And Line-Array Loudspeaker Systems. The Enclosure Shall Be Of Rugged Tour-Grade Construction With Durable Finish, Integrated Handles, Pole-Mount Provision For Satellite Loudspeakers, And Provision For Safe Ground-Stacking Or Transport, And Shall Include Balanced Audio Input And High-Pass Filtered Output Connectivity, Selectable Presets Or Network/Software-Based Control And Monitoring Where Applicable, Power Cabling, And All Necessary Mounting And Interconnection Accessories Required For Complete Deployment. The System Shall Be Supplied Complete With All Accessories, Interconnections, Documentation, Installation, Alignment, Testing, And Commissioning, Ensuring Proper Phase Integration, Uniform Low-Frequency Coverage, Safe Electrical And Mechanical Operation, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Fully Operational High-Power Subwoofer Solution. Reference Make & Model Jbl Srx 918S Approved Makes: Jbl Professional / Qsc / Rcf / Db Technologies / Wharfedale Pro , Compact Array Flying Frame For Powered Line-Array Loudspeaker Supply, Installation, Testing And Commissioning (Sitc) Of A Certified Compact Array Flying Frame Compatible With The Offered Professional Line-Array Loudspeaker System, Suitable For Suspension Or Ground-Stack Deployment In Live Sound, Auditorium, Touring, And Fixed Installations. The Frame Shall Feature A Two-Part Collapsible Or Modular Quick-Deployment Design, Constructed From High-Strength Corrosion-Resistant Metal, And Shall Be Rated To Safely Support The Complete Loudspeaker Array With Appropriate Safety Factor In Compliance With Relevant Rigging And Safety Standards. It Shall Include Secure Locking Mechanisms, Adjustable Tilt/Angle Provision, Certified Suspension Points, And Compatibility With Standard Lifting Hardware, And Be Supplied Complete With All Necessary Rigging Accessories, Fasteners, Safety Pins, Load-Rated Fittings, And Transport Provisions. Preferred Make & Model: Jbl Eon 710 Approved Makes: Jbl Professional / Yamaha / Qsc / Rcf / Db Technologies / Mackie / Ld Systems , Self-Powered Two-Way Floor Monitor Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Floor Monitor Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Sound Applications, Incorporating A Custom-Designed 10-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Waveguide, Driven By Integrated High-Efficiency Class-D Amplification Delivering Not Less Than 1300 W Peak And 650 W Continuous Power, With Maximum Sound Pressure Level Of Approximately 125 Db Or Higher And Usable Frequency Response Extending Approximately From 52 Hz To 20 Khz. The Unit Shall Include A Built-In Multi-Channel Digital Mixer, Advanced Digital Signal Processing Derived From Professional Audio Processing Platforms Providing Equalization, Delay, Crossover, Feedback Control, And Protection Functions, Along With Balanced Xlr/Trs Combo Inputs, Bluetooth Or Equivalent Wireless Audio/Control Capability, And Balanced Xlr Link/Thru Output. Input Impedance, Gain Range, And Crossover Characteristics Shall Be Suitable For Professional Microphone- And Line-Level Operation. The Enclosure Shall Be Of Rugged, Acoustically Optimized Construction Suitable For Wedge-Monitor Or Pole-Mounted Deployment, Incorporating Integral Handles, Stable Base Geometry, And Durable Finish For Continuous Professional Use. The System Shall Be Supplied Complete With All Required Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Safe Electrical Performance, And Full Functional Compliance In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Deployable Powered Floor-Monitor Solution. Reference Make & Model: Jbl Eon 710 Approved Makes: Jbl Professional / Yamaha / Qsc / Rcf / Db Technologies / Mackie / Ld Systems , Supply, Installation, Testing And Commissioning Of: A 24-Channel Analog Mixing Console. A Professional Multi-Channel Analog Mixing Console Suitable For Live Sound Reinforcement And Auditorium Applications, Comprising A Minimum Of 16 Mono Microphone Input Channels With High-Quality, Low-Noise Mic Preamplifiers And +48 V Phantom Power, Along With Additional Stereo Input Channels, Together Forming A 24-Channel Analog Mixing Console, Balanced Xlr/Trs Connectivity, 3-Band Equalization With Sweepable Mid-Frequency And High-Pass Filter On Mono Channels, Equalization On Stereo Channels, Multiple Auxiliary Sends For Monitor And Effects Operation, Built-In 24-Bit Digital Signal Processor Providing Selectable Reverberation, Delay, And Modulation Effects, Subgroup And Main Stereo Bus Routing, Stereo Usb Or Equivalent Interface For Playback And Recording, Led Level Metering, Headphone And Control-Room Monitoring Outputs, Graphic Equalization On Main Outputs, Rugged Metal Chassis Suitable For Continuous Professional Use, And Complete With All Required Accessories, Interconnections, Power Supply, Documentation, Installation, Testing, And Commissioning In Accordance With Approved Technical Standards And Site Requirements. 24-Channel Analog Mixing Console Reference Make & Model: Soundcraft Nano M24 Approved Makes: Sound Craft / Yamaha / Allen & Heath / Mackie / Behringer. , Dynamic Vocal Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wired Dynamic Vocal Microphone Suitable For Live Sound Reinforcement, Stage Performance, Public Address, And Studio Applications, Featuring A Moving-Coil Dynamic Transducer, Cardioid Polar Pickup Pattern For Effective Rear-Noise Rejection And Feedback Control, And Frequency Response Approximately 50 Hz To 15 Khz Optimized For Vocal Clarity. The Microphone Shall Incorporate A Durable All-Metal Body Construction, Integral Pneumatic Or Equivalent Shock-Mount System To Minimize Handling Noise, And Balanced Low-Impedance Xlr Output Compatible With Standard Professional Audio Mixing Consoles And Pa Systems. The Unit Shall Be Supplied Complete With Microphone Clip/Holder, Thread Adapter, Protective Storage Pouch Or Case, And Necessary Interconnection Accessories, And Shall Be Installed, Tested, And Commissioned To Ensure Noise-Free Performance, Proper Signal Integrity, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Vocal-Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 58 Approved Makes: Shure / Sennheiser / Akg / Audix , Dynamic Instrument Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wired Dynamic Instrument Microphone Suitable For Live Sound Reinforcement, Studio Recording, Public Address And Installed Audio Applications, Incorporating A Moving-Coil Dynamic Transducer, Cardioid Polar Pickup Pattern For Effective Off-Axis Noise Rejection And Feedback Control, And Frequency Response Approximately 40 Hz To 15 Khz Optimized For Close-Miking Of Musical Instruments, Percussion, And Amplified Sound Sources. The Microphone Shall Feature A Rugged All-Metal Body Construction, Integral Pneumatic Or Equivalent Internal Shock-Mount System To Minimize Handling Noise And Vibration, And Balanced Low-Impedance Xlr Output Compatible With Standard Professional Mixing Consoles And Pa Systems Without The Need For External Power. The Unit Shall Be Supplied Protective Storage Pouch Or Case And Necessary Interconnection Accessories, And Shall Be Installed, Tested, And Commissioned To Ensure Noise-Free Performance, Proper Signal Integrity, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Instrument-Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 57 Approved Makes: Shure / Sennheiser / Akg / Audix , Professional Drum Microphone Package Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Complete Drum Microphone Package Suitable For Live Sound Reinforcement, Studio Recording, And Installed Performance Applications, Comprising Not Less Than Seven Wired Microphones Including One Dedicated Low-Frequency Kick-Drum Dynamic Microphone, Multiple Dynamic Microphones For Snare And Tom Applications, And A Pair Of Condenser Overhead Microphones Of Identical Make And Model Requiring Standard 48 V Phantom Power, All Featuring Cardioid Pickup Pattern, High Sound-Pressure-Level Handling Capability, Balanced Xlr Output Connectivity, And Frequency Response Optimized For Percussion Instruments. The System Shall Be Supplied Complete With Drum-Rim Mounting Hardware, Microphone Clips, Appropriate Interconnection Cables Where Applicable, And A Durable Protective Carrying Case, Forming A Fully Deployable Drum-Miking Solution Compatible With Standard Professional Audio Mixing Consoles And Pa Systems. The Equipment Shall Be Of Robust Construction Suitable For Continuous Professional Use And Shall Include All Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning In Accordance With Approved Technical Standards And Site Requirements. Reference Make & Model: Shure Pga Drumkit 7 Shure / Sennheiser / Akg / Audix , Compact Overhead Condenser Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Overhead Condenser Microphone System Suitable For Speech Reinforcement, Choir Capture, Conferencing, And Installed Sound Applications, Comprising A Miniature Condenser Microphone Capsule With Flexible Gooseneck Or Suspension Provision And Interchangeable Polar Pattern Cartridges (Minimum Omnidirectional And Cardioid) To Enable Adaptable Coverage. The Microphone Shall Provide Wide And Natural Frequency Response Approximately 50 Hz To 17 Khz, High Dynamic Range (˜ 95 Db Or Greater), Minimum Common-Mode Rejection Of About 45 Db, And Balanced Low-Impedance Output With Defined Polarity, Ensuring Clear And Accurate Sound Reproduction With Low Noise And Distortion. The Unit Shall Operate On Standard Phantom Power In The Range Of Approximately 11 V To 52 V Dc With Low Current Consumption, And Shall Include An In-Line Or Integrated Preamplifier With Controlled Clipping Characteristics Suitable For Professional Audio Systems. The System Shall Be Supplied Complete With Suspension Accessories, Interchangeable Cartridges, Necessary Interconnection Components, Documentation, Installation, Testing And Commissioning, Ensuring Stable Overhead Deployment, Noise-Free Performance, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Fully Deployable Overhead Condenser Microphone Solution Suitable For Continuous Installed Use. Reference Make & Model : Shure Mx202 Shure / Audio-Technica / Akg / Electro-Voice / Earthworks / Samson / Peavey , 12-Inch Powered Two-Way Loudspeaker With Tripod Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Full-Range Loudspeaker Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Sound Applications, Incorporating A Custom-Designed 12-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Waveguide, Driven By Integrated High-Efficiency Class-D Bi-Amplification Delivering Not Less Than 1300 W Peak And 650 W Continuous Power, With Maximum Peak Sound Pressure Level Of Approximately 127 Db Or Higher And Usable Frequency Response Extending Approximately From 50 Hz To 20 Khz. The Loudspeaker Shall Provide Nominal Dispersion Coverage Of About 100° (H) × 60° (V), Balanced Xlr/Trs Combo Audio Inputs With Xlr Link/Thru Output, And Integrated Advanced Digital Signal Processing Including Equalization, Delay, Feedback Suppression, Ducking, And Protection Functions, Together With A Built-In Multi-Channel Digital Mixer, Bluetooth Or Equivalent Wireless Audio/Control Capability, And User-Interface Display For System Configuration. The Enclosure Shall Be Of Rugged, Acoustically Optimized Portable Construction With Integral Handles, Pole-Mount Provision, And Durable Finish Suitable For Continuous Professional Deployment. The System Shall Be Supplied Complete With A Heavy-Duty Adjustable Tripod Speaker Stand Compatible With The Loudspeaker Pole Socket, Incorporating Stable Base Design, Height-Locking Mechanism, And Adequate Load-Bearing Capacity For Safe Operation, Along With All Necessary Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Safe Mechanical And Electrical Performance, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Powered Loudspeaker Solution. Reference Make & Model Jbl Eon 712 Jbl Professional / Qsc / Rcf / Yamaha , Compact 12-Channel Analog Audio Mixing Console Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Multi-Channel Analog Audio Mixing Console Suitable For Live Sound Reinforcement, Studio Recording, Public Address, And Installed Sound Applications, Comprising Not Less Than 12 Input Channels Including A Minimum Of 8 Mono Microphone/Line Input Channels With High-Quality Low-Noise Mic Preamplifiers And +48 V Phantom Power, Together With Additional Stereo Input Channels, Balanced Xlr/Trs Connectivity And Channel Equalization Suitable For Professional Audio Mixing. The Mixer Shall Incorporate Built-In Digital Signal Processing And/Or Effects Processing, Integrated Stereo Usb Audio Interface For Recording And Playback With Computer Connectivity, Usb Media Playback/Recording Capability, And Bluetooth Or Equivalent Wireless Audio Input, Along With Auxiliary Send(S), Main Stereo Outputs With Level Metering, And Headphone/Control-Room Monitoring Facilities. The Unit Shall Feature A Rugged Compact Chassis Suitable For Continuous Professional Use, And Shall Be Supplied Complete With All Required Accessories, Interconnections, Power Supply, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Performance, Reliable Operation, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Compact Mixing Solution Suitable For Stage, Studio, And Installed Environments. Reference Make & Model: Soundcraft Nano M12bt Soundcraft / Yamaha / Behringer / Mackie / Allen & Heath , 24-Channel Rack-Mountable Remote-Controlled Digital Mixer With Usb Multitrack Recording Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Rack-Mountable Digital Audio Mixing Console With Integrated Usb Multitrack Recording Capability, Suitable For Live Sound Reinforcement, Studio Production, Broadcast, And Installed Sound Applications, Comprising Not Less Than 24 Input Channels With High-Quality Microphone Preamplifiers, Balanced Analog And Digital Input Connectivity, And Fully Recallable Digital Signal Processing On All Channels. The System Shall Provide Remote-Control Capability Via Built-In Dual-Band Wi-Fi And/Or Ethernet, Enabling Operation From Multiple Standard Web-Browser-Enabled Devices Across Major Operating Systems Without Dedicated Software, And Shall Support Simultaneous Control From Multiple Devices For Flexible Mixing And Monitoring. The Mixer Shall Incorporate Integrated Professional Signal Processing Including Equalization, Dynamics Control, Feedback Suppression, Delay, And Effects Derived From Established Audio-Processing Platforms, Along With Multitrack Recording Of Input Channels And Stereo Mix Directly To Usb Storage And/Or A Connected Computer, Forming A Complete Recording And Mixing Solution. The Unit Shall Be Housed In A Road-Rugged Rack-Mountable Enclosure Suitable For Stagebox Or Fixed-Installation Deployment, And Shall Provide Multiple Auxiliary Outputs, Main Outputs, Headphone Monitoring, And Computer Audio-Interface Functionality. The Scope Shall Include The Supply Of The Latest Compatible Software/Firmware Version And An Appropriate Control Interface Device (Tablet) Required For Proper Configuration, Remote Operation, And Monitoring Of The System. The Supply Shall Further Include All Necessary Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Reliable Operation, Noise-Free Performance, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Digital Mixing And Recording System. Reference Make & Model: Soundcraft Ui24r Soundcraft / Allen & Heath / Behringer / Yamaha Tablet: Fully Compatible With The Supplied Mixer For Seamless Operation And Control. , Supply, Installation, Testing And Commissioning Of Signal Cable & Interconnectors As Per Requirements. Approved Make Cable: Belden / Canare / Mogami / Amphenol Approved Interconnectors Neutrik,Canare, Belden, Switchcraft, Amphenol, Seetronic, Rean, Hicon, Deltron , 8-Channel Stage Snake Cable With Stage Box Supply, Installation, Testing And Commissioning (Sitc) Of A Professional 8-Channel Audio Multicore (Snake) Cable Assembly With Stage Box, Suitable For Live Sound Reinforcement, Auditorium, Studio, And Installed Pa System Applications. The System Shall Comprise Not Less Than Eight Balanced Low-Noise Microphone/Line Channels Constructed Using High-Purity Copper Conductors With Individually Shielded Twisted Pairs And Overall Protective Shielding, Enclosed In A Flexible, Abrasion-Resistant Outer Jacket Designed For Stage And Fixed-Installation Environments To Ensure Minimal Signal Loss, Low Electromagnetic Interference, And Reliable Long-Term Performance. The Stage End Shall Terminate In A Rugged Metal Stage Box Fitted With Clearly Numbered Professional Xlr Female Input Connectors (Minimum 8 Channels) And Appropriate Strain Relief, While The Console End Shall Provide Matching Xlr Male Fan-Out Connectors Or Multipin Termination Of Suitable Length For Mixer Connectivity. All Connectors Shall Be Professional-Grade With Secure Contact, Proper Grounding, And Mechanical Protection To Maintain Consistent Signal Integrity. The Multicore Assembly Shall Be Of Suitable Length As Required At Site, Properly Laid, Dressed, Labeled, And Tested For Continuity, Insulation Resistance, Shielding Effectiveness, And Noise-Free Operation. The Supply, Installation, Testing And Commissioning Scope Shall Include All Terminations, Routing Accessories, Identification Ferrules, Documentation, Testing, And Commissioning, Forming A Complete And Fully Operational Stage-To-Mixer Signal Interconnection System In Accordance With Approved Technical Specifications And Site Requirements. Approved Make: Belden / Neutrik / Canare / Mogami / Amphenol , 27U Equipment Rack With Power Distribution Unit Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Standard 27U Equipment Rack Enclosure Suitable For Housing Audio, Networking And Control Equipment Associated With The Pa And Av System. The Rack Shall Be Of Robust Steel Construction With Corrosion-Resistant Powder-Coated Finish, Providing Adequate Load-Bearing Capacity, Ventilation Provisions, Cable-Management Access, And Secure Front Door With Locking Arrangement, Along With Removable Side Panels And Appropriate Mounting Rails Conforming To International Rack Standards. The Rack Shall Be Supplied Complete With A Rack-Mountable Power Distribution Unit Providing Multiple Switched And Fused Ac Output Sockets, Proper Earthing/Grounding Arrangement, Overload Protection, And Suitable Input Power Cord, Ensuring Safe And Reliable Power Distribution To All Installed Equipment. The Installation Shall Include All Necessary Mounting Hardware, Blanking Panels, Cable Organizers, Labeling, Earthing Connections, And Internal Power Wiring, And The System Shall Be Properly Assembled, Installed, Tested, And Commissioned To Ensure Mechanical Stability, Electrical Safety, Effective Heat Dissipation, And Reliable Operation In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete And Ready-To-Use Equipment Rack Solution. Approved Makes: Valrack / Netrack / Rittal / Or Equivalent Professional-Grade Manufacturers Meeting Or Exceeding The Specified Technical Parameters. , Microphone Mini Boom Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Microphone Mini Boom Stand Suitable For Stage Performance, Studio Recording, Auditorium, And Installed Sound Applications. The Stand Shall Be Of Robust Metal Construction With Corrosion-Resistant Finish, Incorporating A Stable Weighted Base Or Tripod Base, Height-Adjustable Vertical Shaft, And A Compact Adjustable Boom Arm With Secure Locking Mechanism For Precise Microphone Positioning. The Stand Shall Provide Standard Microphone Mounting Thread Compatibility (3/8? And 5/8? With Suitable Adapter) And Shall Be Capable Of Supporting Typical Dynamic Or Condenser Microphones Without Vibration Or Drift, Ensuring Stable And Noise-Free Operation During Use. The Unit Shall Be Supplied Complete With All Necessary Mounting Accessories, Thread Adapters, Tightening Knobs, And Protective Fittings, And Shall Be Installed, Tested, And Commissioned To Ensure Mechanical Stability, Smooth Adjustment, And Reliable Performance In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Deployable Microphone Stand Solution Suitable For Continuous Professional Use. Approved Makes : Hercules / K&M / On-Stage / Gator / Samson / Ultimate , Supply, Installation, Testing And Commissioning Of Microphone Boom Stand Having Technical Specifation As Item No: 1.16 Approved Makes : Hercules / K&M / On-Stage / Gator / Samson / Ultimate , 16A + 6A Combo Power Distribution Unit (8-Socket) Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Rack-Mountable Or Portable Power Distribution Unit (Pdu) Suitable For Audio-Visual, Pa, And Equipment Rack Applications, Providing A Minimum Of Eight Ac Output Sockets In A 16A + 6A Combination Configuration Compatible With Standard Indian Electrical Systems. The Unit Shall Be Of Robust Metal Construction With Fire-Retardant Insulated Components, Incorporating Individual Or Grouped Switched Outputs, Suitable Internal Wiring, Proper Earthing/Grounding Provision, And Protection Features Such As Overload Protection, Fuse Or Mcb Safeguarding, And Surge Suppression Where Applicable, Ensuring Safe And Reliable Power Delivery To Connected Equipment. The Pdu Shall Be Designed For Continuous Professional Use, With Clearly Labeled Sockets, Secure Input Power Connection Of Appropriate Current Rating, And Compatibility With Standard Rack Or Equipment Mounting Arrangements. Approved Makes : Valrack / Netrack / Rittal / Hager / Legrand / Or Equivalent Professional-Grade Manufacturers Meeting Or Exceeding The Specified Technical Parameters. , Wireless Handheld Vocal Microphone System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wireless Handheld Vocal Microphone System Suitable For Live Sound Reinforcement, Stage Performance, Auditorium And Installed Pa Applications, Comprising A Dynamic Handheld Microphone Capsule With Cardioid Polar Pickup Pattern And Frequency Response Approximately 50 Hz To 15 Khz Optimized For Clear Vocal Reproduction And Effective Feedback Rejection. The System Shall Include A Uhf Or Equivalent Professional Wireless Transmission System With Rack-Mountable Or Desktop Receiver, Stable Rf Performance With Selectable Channels/Frequencies As Permitted By National Regulations, Balanced Audio Output Connectivity, And Provisions For Antenna Diversity Or Equivalent Signal-Stability Technology To Ensure Reliable, Noise-Free Operation. The Handheld Transmitter Shall Feature Rugged Metal Construction, Secure Battery Compartment, Suitable Operating Range For Stage Use, And Compatibility With Standard Rechargeable Or Replaceable Batteries. The Receiver Shall Provide Audio Level Control, Rf/Af Indication, And Necessary Output Interfaces For Connection To Professional Mixing Consoles And Pa Systems. The Unit Shall Be Supplied Complete With Microphone Transmitter, Receiver, Antenna System, Power Supply, Mounting Accessories, Interconnection Cables, Documentation, Installation, Testing, And Commissioning, Ensuring Stable Rf Transmission, Clear Audio Performance, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Wireless Vocal Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 58 Approved Makes Sennheiser / Shure / Sennheiser / Audio-Technica / Akg , Digital Speaker Management System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Digital Loudspeaker Management And System-Processing Unit Suitable For Pa, Auditorium, And Installed Sound Reinforcement Systems, Incorporating Multi-Input And Multi-Output Balanced Analog Audio Channels (Minimum 2 Inputs And 6 Outputs Or Higher) With High-Resolution Digital Signal Processing For Complete System Optimization And Protection. The Processor Shall Provide Configurable Crossover Filtering, Parametric And Graphic Equalization, Delay Alignment, Polarity Control, Dynamic Limiting, And System Protection, Along With Automatic Feedback Suppression, Room Equalization, And Loudspeaker Tuning Functions Derived From Established Professional Audio-Processing Technologies. The Unit Shall Support Front-Panel Control With Display Interface And Remote Configuration Via Computer Or Network Connection, And Shall Include Non-Volatile Memory For Storing Multiple User Presets Suitable For Different System Configurations. Audio Performance Shall Ensure Low Noise, Wide Dynamic Range, And Minimal Distortion, Appropriate For Professional Live And Installed Sound Applications. The Equipment Shall Be Housed In A Standard Rack-Mountable Enclosure Suitable For Continuous Operation, And Shall Be Supplied Complete With Power Supply, Interconnection Accessories, Mounting Hardware, Documentation, Installation, Testing, And Commissioning, Ensuring Reliable Signal Processing, Safe Operation, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Speaker-Management Solution. Reference Make & Model Dbx Drive Rack Venue 360 Approved Makes : Dbx / Xilica / Behringer / Bss Audio , Condenser Pickup Microphone System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Miniature Condenser Pickup Microphone System Suitable For Acoustic Musical Instruments, Stage Performance, Studio Recording, And Installed Sound Applications, Incorporating A Contact-Type Or Surface-Mount Condenser Transducer With Figure-8 (Bi-Directional) Polar Pickup Pattern And Wide Frequency Response Approximately 10 Hz To 18 Khz For Accurate Vibration And Tonal Reproduction. The Microphone Shall Provide High Sensitivity, Low Self-Noise, And Wide Dynamic Range, And Shall Operate On Standard Phantom Power (Approximately 9 V To 52 V Dc) Through An In-Line Or Integrated Preamplifier Module With Balanced Low-Impedance Xlr Output Suitable For Connection To Professional Mixing Consoles And Pa Systems. The System Shall Include Non-Permanent Mounting Provision Such As Adhesive Pad Or Equivalent Detachable Fixing Method To Enable Secure Attachment To Musical Instruments Without Damage, Along With Shielded Connecting Cable, Preamplifier Interface, And Strain-Relief Protection To Ensure Reliable Stage Use. The Unit Shall Be Supplied Complete With Mounting Accessories, Interconnection Components, Protective Storage Provision, Documentation, Installation, Testing, And Commissioning, Ensuring Stable Pickup Performance, Noise-Free Signal Transmission, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Condenser Pickup Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Akg C411pp Approved Make : Akg / Audio-Technica / Shure / Dpa , Direct Injection (Di) Box Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Direct Injection (Di) Box Suitable For Stage, Studio, Auditorium, And Installed Pa Applications, Designed To Convert High-Impedance Unbalanced Instrument Or Line-Level Signals To Balanced Low-Impedance Microphone-Level Output For Direct Connection To Mixing Consoles And Audio Systems. The Unit Shall Provide High-Quality Signal Isolation And Impedance Matching Using Transformer-Based Or Active Electronic Circuitry, Incorporating Balanced Xlr Output, Parallel/Thru Output For Amplifier Feed, Ground-Lift Switch To Eliminate Hum And Noise, And Attenuation Pad Or Level-Control Facility Where Applicable. The Di Box Shall Support Passive Operation Or Active Powering Via Internal Battery And/Or Phantom Power, Ensuring Compatibility With A Wide Range Of Musical Instruments And Audio Sources. Audio Performance Shall Ensure Wide Frequency Response, Low Distortion, High Headroom, And Minimal Noise, Suitable For Professional Live And Recording Environments. The Enclosure Shall Be Of Rugged Metal Construction With Protective Finish, Suitable For Continuous Stage Use, And Shall Be Supplied Complete With Necessary Connectors, Accessories, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Signal Transmission, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Di Interface Solution. Reference Make & Model Akg C411pp Approved Make : Radial / Dbx / Klark Technik / K & M / , Additional Xlr-To-Xlr Microphone Cable (10 M Length) Supply, Installation, Testing And Commissioning (Sitc) Of Professional Balanced Xlr-To-Xlr Microphone Interconnection Cables Of Minimum 10 Metres Length, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cables Shall Be Constructed Using High-Purity Copper Conductors With Twisted-Pair Configuration, Effective Overall Shielding, And Low-Capacitance Insulation To Ensure Minimal Signal Loss, Low Electromagnetic Interference, And Noise-Free Audio Transmission Over The Specified Distance. Each Cable Shall Be Terminated With Professional-Grade 3-Pin Xlr Male And Female Connectors Featuring Secure Locking Mechanism, Proper Grounding, Strain-Relief Protection, And Durable Metal Housing, Ensuring Reliable Connectivity And Long-Term Mechanical Integrity Under Continuous Professional Use. The Outer Jacket Shall Be Flexible, Abrasion-Resistant, And Suitable For Stage Handling And Fixed Installation Environments. The Supply, Installation, Testing And Commissioning Scope Shall Include Supply Of Complete Ready-To-Use Cables, Identification/Labeling, Testing For Continuity, Insulation, Shielding Effectiveness, And Signal Integrity, And Commissioning To Achieve Stable, Hum-Free Operation In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Professional Microphone Interconnection Solution. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Trs To Trs Audio Interconnection Cables Supply, Installation, Testing And Commissioning (Sitc) Of Professional Balanced Trs-To-Trs Audio Interconnection Cables Of Minimum 10 Metres Length Each, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cables Shall Utilize High-Purity Copper Twisted Conductors With Effective Shielding And Low Capacitance, Ensuring Low Noise, Minimal Signal Loss, And Reliable Balanced Audio Transmission Over The Specified Distance. Each Cable Shall Be Terminated With Professional 6.35 Mm Trs (Stereo) Male Connectors Having Durable Metal Housing, Proper Strain Relief, And Secure Electrical Contact, And Provided With A Flexible, Abrasion-Resistant Outer Jacket Suitable For Continuous Professional Use. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Ts To Ts Audio Instrument Cable Supply, Installation, Testing And Commissioning (Sitc) Of Professional Unbalanced Ts-To-Ts Audio/Instrument Interconnection Cable Of Minimum 10 Metres Length, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cable Shall Be Constructed Using High-Purity Copper Conductor With Effective Shielding And Low Capacitance, Ensuring Low Noise Pickup, Minimal Signal Loss, And Reliable Signal Transmission For Instrument Or Line-Level Audio Connections. Each Cable Shall Be Terminated With Professional 6.35 Mm Ts (Mono) Male Connectors Featuring Durable Metal Housing, Secure Electrical Contact, And Proper Strain-Relief Protection, And Provided With A Flexible, Abrasion-Resistant Outer Jacket Suitable For Continuous Professional Use. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Two-Way Loudspeaker With Speaker Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Full-Range Loudspeaker Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Pa System Applications, Incorporating A High-Efficiency 12-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Constant-Directivity Waveguide, Driven By Integrated Class-D Amplification Delivering Not Less Than Approximately 1000 W Peak Power (Or Equivalent Continuous Rating). The Loudspeaker Shall Provide Maximum Sound Pressure Level Of About 130 Db Special Or Higher And Usable Frequency Response Extending Approximately From 50 Hz To 20 Khz, Ensuring Clear, High-Output Full-Range Audio Performance. The Unit Shall Include Balanced Xlr/Trs Combo Input(S), Additional Line/Microphone Input Capability, And Xlr Link/Thru Output, Along With Built-In Digital Signal Processing Providing Equalization, Crossover Management, Dynamic Protection, And Selectable Operating Modes Suitable For Front-Of-House Or Monitor Use. The Enclosure Shall Be Of Rugged, Acoustically Optimized Moulded Or Composite Construction With Integral Handles, Pole-Mount Socket, Monitor-Wedge Angle Provision, And Durable Protective Finish Suitable For Continuous Professional Deployment. The System Shall Be Supplied Complete With A Heavy-Duty Adjustable Tripod Speaker Stand, All Required Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Electrical Safety, Mechanical Stability, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Powered Loudspeaker Solution. Reference Make : Yamaha Dbr Approved Make : Yamaha / Jbl Professional / Rcf Art, Qsc , Stage-Monitor Loudspeaker Supply, Installation, Testing And Commissioning Of A Self-Powered (Active) Two-Way Bi-Amped Bass-Reflex Professional Stage-Monitor Loudspeaker Comprising A 12-Inch Low-Frequency Woofer With Minimum 2.5-Inch Voice Coil And Ferrite Magnet And A 1.75-Inch High-Frequency Compression Driver In Coaxial Configuration, Providing Nominal Coverage Of Approximately 90° Horizontal × 60° Vertical With Fir-X Dsp-Controlled Crossover Around 1.8 Khz. High-Efficiency Class-D Bi-Amplification Delivering Not Less Than 1000 W Dynamic Power (Lf About 800 W And Hf About 200 W) And Approximately 465 W Continuous Output, Capable Of Producing A Maximum Sound Pressure Level Of At Least 129 Db Peak With A Frequency Response Of Approximately 55 Hz To 20 Khz (-10 Db) Or Wider. A Minimum Of Two Balanced Xlr/Trs Combo Mic/Line Inputs, Stereo Rca Input Provision, Balanced Xlr Link/Output, Integrated Dsp Processing And Protection Circuits, Housed In A Rugged Plywood Bass-Reflex Enclosure With Protective Grille, Monitor-Tilt Provision And Pole-Mount Socket, Suitable For Operation On 220-240 V Ac, 50 Hz Supply, Complete With All Necessary Accessories, Cabling, Installation Hardware. Reference Make & Model : Yamaha Dhr Approved Makes Yamaha / Jbl Professional / Rcf Art, Qsc , Analogue Audio Mixing Console Supply, Installation, Testing And Commissioning Of A Professional Analogue Audio Mixing Console With Minimum 16 Input Channels, Comprising At Least 8 Mono Microphone/Line Input Channels With High-Quality Microphone Preamplifiers, Switchable 48 V Phantom Power, Insert Points, High-Pass Filters, And Single-Knob Compressors On Selected Mono Channels, Together With Additional Stereo Line Input Channels To Realize Not Less Than 16 Simultaneous Inputs. The Mixer Shall Provide Balanced Xlr/Trs Connectivity, Multi-Band Channel Equalization With Sweepable Mid-Frequency On Mono Channels, Minimum Four Auxiliary Sends Including Effects Send, Group And Stereo Bus Routing, Peak Indication, And Comprehensive Master Level Metering. The Unit Shall Incorporate A Built-In Digital Multi-Effects Processor With Multiple Preset Programs And An Integrated Usb Audio Interface Supporting At Least 2-In/2-Out Operation With 24-Bit/192 Khz Resolution For Computer Recording And Playback. The Console Shall Be Housed In A Robust Metal Chassis Suitable For Portable Or Fixed Installation, Operate On 220-240 V Ac, 50 Hz Supply, Complete With All Necessary Accessories, Cabling, Installation Hardware. Reference Make: Yamaha Mg16xu Approved Makes : Yamaha, Allen & Heath, Soundcraft, Mackie, Behringer, Presonus, Midas, Studiomaster. , Supply, Installation, And Execution Of All Electrical Wiring Works Required For The Public Address System, Including Equipment Fixing, Speaker Cabling, Projector Cabling, Scaffolding, Carpentry, Fabrication, Conduit Laying, And Associated Civil Works, Complete In All Respects As Per Site Requirements And Directions Of The Universitys Engineer-In-Charge And Calibration, Testing, And Fine-Tuning Of The Installed Public Address System To Ensure Optimal Performance And Sound Quality, Complete In All Respects As Directed By The Universitys Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
39.
Educational and Research Institute #10838901 Price Bid
Supply Of Academic Books For The Central Library Of Bethune College Supply Of Academic Books For The Central Library Of Bethune College, Kolkata , Department Of History , Title: Communalism In Modern India. Author: Bipan Chandra Publisher: Haranand Publications Pvt.Ltd. , Title: The Construction Of Communalism In Colonial North India. Author:Gyanendra Pandey Publisher: Oxford India Perennials , Title: Communal Riots In Bengal. Author: Suranjan Das Publisher:Oxford India Paperbacks , Title: Communalism From Indian Perspectiv Author: Sarajit Kumar Chatterjee Publisher: Concept Publishing Company , Title: The Kashmir Dispute 1947-2012 Author: A.G. Noorani Publisher: Tulika Books , Title: Independence And Partition. Author: Sucheta Mahajan Publisher: Sage Publications Pvt. Limited , Title: The Egyptians: An Introduction. Author: Robert G. Morkot Publisher: Routledge , Title: The Holocaust Of Indian Partition, An Inquest. Author: Madhav Publisher: Rupa Publications India , Title: The Politics Of India Since Independence. Author: Paul R. Brass Publisher: Cambridgeuniversity Press , Title: Integration Of The Indian States. Author: V.P Menon Publisher: Orient Blackswan , Title: Cultural Theory And Popular Culture: An Introduction. Author: John Storey Publisher: Pearson , Title: Popular Culture. Author: Abin Chakraborty Publisher: Orient Blackswan , Title: Of The People: Essays On Indian Popular Culture. Author: Biswarup Sen Publisher: Nan , Title: Narratives Of Indian Cinema. Author: Edited By Manju Jain Publisher: Primus , Title: Popular Culture: Schooling And Every . Author: Henry Giroux Publisher: Abc-Clio Llc , Title: Connecting Through Culture. Author: Vinay Sahasrabuddhe & Sachchidananda Joshi Publisher: Wisdom Tree , Title: Teaching. Author: Edited By David Buckingham Publisher: Taylor & Francis Ltd. , Title: Understanding Popular Culture. Author: Steven L. Kaplan Ed. Publisher: De Gruyter , Title: Banlar Jatra Natak. Author: Brojendrokumar Dey Publisher: Dishari Prakashani , Title: Fingerprinting Popular Culture. Author: Vinay Lal And Ashis Nandy Publisher: Oxford India Paperbacks , Title: Makers Of Modern Dalit History. Author: Sudarshan Ramabadran & 1 Publisher: Penguin Random House India , Title: India From Curzon To Nehru And After. Author: Durga Das Publisher: Rupa& Company , Title: Makers Of Modern India. Author: Ramchandra Guha Publisher: Penguin India , Title: World Politics Since 1945. Author: Petercalvocoressi Publisher: Taylor & Francis , Pg Department Of English , Title: The Cambridge Companion To Shakespearean Tragedy. Publisher: Cup , Title: The Cambridge Companion To Greek Tragedy. Publisher: Cup , Title: The Perishable Empire By Meenakshi Mukherjee. Publisher: Oup , Title: Imaginary Homelands By Salman Rushdie. Publisher: Granta , Title: Study Writing: A Course In Writing Skills For Academic Purposes By Liz Hamp-Lyons & Ben Heasley. Publisher: Cup , Title: A Course In Academic Writing By Renu Gupta. Publisher: Orient Blackswan , Title: An Introduction To English Language Teaching By Jaydeep Sarangi. Publisher: Saha Book House Publisher: Orient Blackswan , Title: Teaching And Learning English: A Sourcebook For Teachers And Teacher Trainers- M.L. Tickoo. Publisher: Orient Longman , Title: English Language Teaching : Approaches, Methods, Techniques By Geetha Nagaraj. Publisher: Orient Blackswan , Title: From Puritanism To Postmodernism By Malcolm Bradbury & Richard Ruland. Publisher: Penguin , Title: The Golden Treasury (Palgrave). Publisher: Classics Library , Title: Selected Writings Of Ralph Waldo Emerson. Publisher: Signet Classics , Title: A Critical History Of English Poetry By H.J.C Grierson. Publisher: Bloomsbury Academic India , Title: Mla Handbook For Writers Of Research Papers 9Th Edition. Publisher: Mla , Title: The Cambridge Companion To Emily Dickinson. Publisher: Cup , Title: Harper Lee “To Kill A Mockingbird”. Publisher: Harper Collins , Title: Samuel Taylor Coleridge “Biographia Literaria”. Publisher: Norton , Department Of Philosophy , Title: Naribaad . Author: Rajashree Basu Publisher: West Bengal State Book Board , Title: Paschatya Darsaner Prathamik Bislesan. Author: Samarendra Bhattacharya And Sisir Ranjan Bhattacharya Publisher: Book Sindicate Private Limited , Title: Paribesh O Naitikata. Author: Nirmalya Narayan Chakraborty Publisher: West Bengal State Book Board , Title: Shanti O Sangharsha Samadhaner Darshan . Author: Raspati Mondal Publisher: Sanskrit Book Depo , Title: Manab Adhikarer Darshan . Author: Aayesha Dutta Publisher: Sanskrit Pustak Bhandar , Title: Nitishastra. Author: Dikshit Gupta Publisher: Poshcimbongo Rajjo Pustok Porshod , Title: Manabadhikar Porichay. Author: Sekh Tabarak Ali And Afrin Akhter Publisher: Maity Publication , Title: Manabadhikar Ki Ebong Keno. Author: Benulal Dhar Publisher: Progressive Publishers , Title: Hume-R Enquiry. Author: Samarendra Bhattacharya Publisher: Book Sindicate Pvt. Ltd. , Title: Phalita Nitishastra -1St Part. Author: Dr.Santosh Kumar Paul Publisher: Levant Books , Title: Niti O Nyajyata. Author: Amartya Sen Publisher: Ananda Publishers , Title: Byanbhaharik Nitibidya. Author: Samarendra Bhattacharya Publisher: Book Syndicate Pvt. Ltd. , Title: Naitikata O Naribad. Author: Shefali Moitra Publisher: New Age Publishers Private Ltd , Title: The Idea Of Justice. Author: Amatya Sen Publisher: Penguin Books , Title: Social And Political Philosophy. Author: O.P.Gauba Publisher: National Peperbacks , Title: Handbook Of Peace And Conflict Studies. Author: Charles Webel And Johan Galtung Publisher: Routledge Yaylor And Francis Group , Title: Jukti Baigyanik Paddhoti. Author: Ramaprasad Das Publisher: Calcutta University , Title: Symbolic Logic. Author: I M Copi Publisher: Phi Learning Pvt. Ltd. , Title: Introduction To Logic. Author: P Suppes Publisher: Litton Educational Publishing , Title: Sabda Jigyasa. Author: R P Das Publisher: Aananda Publishers , Title: Peace By Peaceful Means-Peace And Conflict, Development And Civilization. Author: Johan Galtung Publisher: Sage Publications , Title: Classical Indian Ethica Thought. Author: Kedar Nath Tiwari Publisher: Motilal Banarsidass Publishers , Title: Bharatiya Darsaner Ruprekha - Bengali Translation Of Outlines Of Indian Philosophy - M.Hiriyanna. Author: Dr. Srikanta Samanta Publisher: Suhrid Publication , Title: Darshan Diganta Semester-2. Author: Atashi Mallick Mondal Publisher: Suhrid Publication , Title: A Theory Of Justice. Author: John Rawls Publisher: Belknap Press , Title: Political Theory . Author: D. C. Bhattacharya Publisher: Vijoya Publishing House Pvt Ltd , Title: Introduction To Philosophy. Author: J .N. Sinha Publisher: New Central Book Agency (P) Ltd , Pg Department Of Mathamatics , Title: Classical Mechanics . Author: Gupta And Sharma Publisher: Pragati , Title: Python Programming. Author: Reema Thareja Publisher: Oxford University Press , Title: Python For Everyone. Author: Saurabh Chandrakar; Dr. Nilesh Bhaskarrao Bahadure Publisher: Bpb Publications , Title: Let Us Python. Author: Yashwant Kanetkar; Aditya Kanetkar Publisher: Bpb Publications , Title: Core Python Programming. Author: Dr. R. Nageswara Rao Publisher: Dreamtech Press , Title: Basic Abstract Algebra, 2Nd Edition . Author: P. B. Bhattacharya, S. K. Jain, S. R. Nagpal Publisher: Cambridge University Press , Title: Foundation Of Complex Analysis . Author: S . Ponnusamy Publisher: Narosa , Title: Functional Analysis . Author: S. Kesavan Publisher: Hindustan Book Agency , Title: Measure And Integration . Author: S. Kesavan Publisher: Hindustan Book Agency , Title: Algebraic Geometry For Beginners . Author: C. Musili Publisher: Hindustan Book Agency , Title: Mathematical Models In Biology & Medicine. Author:J Kapur Publisher: Affiliated , Title: Bio - Mathematics: For B.Tech/ B.Sc. Author:Dr. Praveen Kumar Mathur (Author), Dr. Mohit Saxena Publisher: Adhyyan Books , Pol Sc. Book List , Title: Feminisms. Author: Arpita Mukhopadhyay Publisher: Orient Blackswan , Title: Governance: Issues And Challenges. Author: Shivani Singh Publisher: Sagetexts , Title: Governance: Isuues And Challenges. Author: Abhay Prasad Singh & Krishna Murari Publisher: Pearson , Title: Legal Studies In India. Author: Ed. Namrata Kothari Publisher: Avenel Press , Title: Agrarian Struggles In India After Independence . Author: Ed. A.Desai Publisher: Oup , Title: Power Matters. Author: Ed. J Harris Publisher: Oup , Title: Development Process & Social Movt. In Cont.India. Author: Haridwar Shukla Publisher: Mahaveer Publications , Title: Understanding Political Theory. Author: Haridwar Shukla Publisher: Mahaveer Publications , Title: Development Process & Social Movt. In Cont.India. Author: Abhay Prasad Singh Publisher: Pinnacle Learning , Title: Political Theory . Author: R C Agarwal Publisher: S.Chand , Title: ???????? ?????? : ??????????? ? ?????? . Author: ???? ???????????? Publisher: ???? ???????? , Title: ???????. Author: ??????? ??? Publisher:West Bengal State Book Board , Title: ????????? ???????? ??????. Author: ?????? ???? Publisher: ?????? ???? ????? ?????? ????? , Title: ??????? ???????? ?????? ??????? . Author: ?????? ?????? ??? Publisher: ?????? ???? ????? ?????? ????? , Title: ?????????? . Author: ????? ???? ?? Publisher: ?? ??? ????? , Title: Social Movements In India . Author: Ghanshyam Shah Publisher: Sage Publications , Title: Political Sociology . Author: Ed. Pradip Basu Publisher: Setu Publications , Title: Public Admn. : From Government To Governance . Author: Bidyut Chakraborty Publisher: Orient Blackswan , Title: Legislative Practices And Procedures. Author: Gautam Mukhopadhyay Publisher: Setu Publications , Title: Constitutional Values And Fundamental Duties . Author: Gautam Mukhopadhyay Publisher: Setu Publications , Title: ?????? ??? ???????? . Author: ???? ???????????? Publisher: ???? ???????? , Title: Western Political Thought . Author: Deepan Das Publisher: Concept Pub Com Ltd , Title: Indian Public Administration: Insti. And Issues. Author: R.K . Arora And Goyal Publisher: New Age Intl. Publishers , Title: Global Politics: Issues And Perspectives . Author: Nirmal Jindal,Kumar Publisher: Sage Publications , Department Of Statistics , Title: Descriptive And Inferential Statistics Using R. Author: Dabas Preeti Publisher: Sultanchand & Sons , Title: Fundamentals Of Mathematical Statistics. Author: Gupta Sc & Kapoor Vk Publisher: Sultan Chand & Sons , Title: Fundamentals Of Applied Statistics. Author: Gupta Sc & Kapoor Vk Publisher: Sultan Chand & Sons , Title: Problems & Solutions In Mathematical Statistics. Author: Gupta Sc, Gupta Vikas & Gupta Sanjeev Kumar Publisher: Sultan Chand & Sons , Title: Probability Theory: An Advanced Course (Paperback). Author: Borkar V.S. Publisher: Springer , Title: A Second Course In Probability (Paperback). Author: Sheldon M. Ross And Erol A. Peköz Publisher: Cambridge University Press , Title: Probability Theory Paperback. Author: Sinai Publisher: Springer-Verlag , Title: Introduction To Linear Regression Analysis. Author: Douglas C. Montgomery, Elizabeth A. Peck, Et Al. Publisher: Wiley , Title: Understanding Regression Analysis (Paperback). Author: Andrea L. Arias And Peter H. Westfall Publisher: Crc Press , Title: Logistic Regression: A Self-Learning Text. Author: Kleinbaum D.G. Publisher: Springer , Title: Statistical Learning From A Regression Perspective . Author: Richard A. Berk Publisher: Springer , Title: Multiple Regression And Causal Analysis. Author: Mckee J. Mcclendon Publisher: Waveland Press , Title: Bayesian Thinking In Biostatistics. Author: Rosner, Gary L; Laud, Purushottam W. And Johnson, Wesley O Publisher: Chapman & Hall , Title: State-Space Methods For Time Series Analysis. Author: Jose Casals, Alfredo Garcia-Hiernaux, Et Al. Publisher: Crc Press , Title: The Analysis Of Time Series: An Introduction. Author: Chris Chatfield Publisher: Chapman & Hall , Title: The Statistical Analysis Of Time Series Paperback. Author: T. W. Anderson Publisher: John Wiley & Sons, Inc. , Title: Statistical Analysis Of Stationary Time Series. Author: Ulf Grenander Publisher: American Mathematical Society , Title: Effect Size For Anova Designs Paperback. Author: Jose M. Cortina Publisher: Sage Publications Inc , Title: Design And Analysis Of Experiments. Author: Douglas C. Montgomery Publisher: Wiley , Title: Anova And Mixed Models. Author:Lukas Meier Publisher: Crc Press , Title: Analysis Of Variance, Experimental Design, And Multivariate Anova. Author: Dawn Iacobucci Publisher: Crc Press , Title: Statistical Design . Author: George Casella Publisher: Springer , Title: Anova And Ancova: A Glm Approach. Author: Andrew Rutherford Publisher: Wiley , Title: Statistical Design And Analysis Of Stability Studies. Author: Shein-Chung Chow Publisher: Chapman & Hall/Crc , Title: Sampling: Design And Analysis . Author: Sharon L. Lohr Publisher: Chapman & Hall , Title: Sample Survey Methods And Theory Paperback. Author: Morris H. Hansen, William N. Hurwitz, William G. Madow Publisher: Wiley-Interscience , Title: Theory Sample Surveys And Statistical Decisions. Author: K.S.Kushwaha & Rajesh Kumar Publisher: New India Publishing Agency , Title: Survival Analysis: A Self-Learning Text. Author: David G. Kleinbaum Publisher: Springer , Title: Survival Analysis: . Author: Rupert G. Miller J . Publisher: Wiley , Title: Reliability Theory And Survival Analysis. Author: P. G. Dixit Andsandesh Kurade Publisher: Nirali Prakashan , Title: Survival Models And Data Analysis. Author: Elandt-Johnson And Johnson Publisher: Wiley India , Title: Survival Analysis: Techniques For Censored And Truncated Data. Author: John P. Klein And Melvin L. Moeschberger Publisher: Springer-Verlag , Title: Survival Analysis. Author: H J Vaman And Prabhanjan Tattar Publisher: Crc Press , Title: Statistical Quality Control: A Modern Introduction . Author: Douglas C. Montgomery Publisher: Wiley , Title: Statistical Quality Control & Quality Management. Author: R.C.Gupta Publisher: Khanna Publishers , Title: Statistical Quality Control. Author: Mahajan M Publisher: Dhanpat Rai & Co. , Title: Statistical Process Control For Quality Improvement- The Deming Paradigm And Beyond. Author: J. Koronacki And J.R. Thompson Publisher: Chapman & Hall/Crc , Title: Statistical Method From The Viewpoint Of Quality Control. Author: Walter A. Shewhart Publisher: Dover Publications Inc. , Title: Exploratory Data Analysis Author: Tukey, J.W. Publisher: Addison-Wesley Publishing Co , Title: Modern Probability Theory And Its Applications. Author: Parzen, E Publisher: John Wiley , Title: An Introduction To Statistical Learning: With Applications In Python . Author: James, G., Witten, D., Hastie, T., Tibhsirani, R., And Taylor, J. Publisher: Springer , Title: Math For Deep Learning: What You Need To Know To Understand Neural Networks. Author: Kneusel, R.T. Publisher: No Stratch Press , Title: Statistical Image Processing Techniques For Noisy Images: An Application-Oriented Approach. Author: Refregier, P., Goudail, F. Publisher: Kluwer Academic/Plenum Publishers , Department Of Botany , Title: Economicbotanyin Tropics 2012 Author: Koclili:Ir, S.L.. Publisher: Macmillan& Co. New Delhi , Title: Jha, T.B. & Gliosli, 13.2003 Author: Ilaizttissuel Ultrirc Publisher: Uni Varsitiesircss , Title: Singh. D. &Manivannan,S.2009. Author: Geneticresorwces Of Horticultural Crops Publisher: International Bookdistributing Co , Title: Developmentalbiology Of Flowering Plants2000 Author: Raghavan Publisher: Springer , Title: Developmentalgenetics And Plant Evolution. Author: Quentin C.B. Cronk, Richardm. Bateman, Julie Hawkins (2002) — Publisher: Crcpress , Title: Plant Physiology And Developmen. Author: Lincoln Taiz,Eduardo Zeiger. Et Al. Publisher: Sinaur Oxford Universitypress , Title: Plant Systematics Theory And Practice. Author: Gurcharansingh Publisher: Crcpress (Taylor And Francis Group) , Title: Plant Anatomy. Author: Piyush Roy Publisher: New Central Bookasency , Title: Cell Biology Genetics And Molecular Biology Ed 2. Author: Dipakkr Kar Some Haldcr Publisher: Newcentral Book Agency , Title: Plant Tissue Culture. Author: Kalyankumar De Publisher: New Central Book Agency , Department Of Economics , Title: Descriptive And Inferential Statistics Using R. Author: Dabas Preeti Publisher: Sultanchand & Sons , Title: Fundamentals Of Mathematical Statistics. Author: Gupta Sc & Kapoor Vk Publisher: Sultan Chand & Sons , Title: Fundamentals Of Applied Statistics. Author: Gupta Sc & Kapoor Vk Publisher: Sultan Chand & Sons , Title: Problems & Solutions In Mathematical Statistics. Author: Gupta Sc, Gupta Vikas & Gupta Sanjeev Kumar Publisher: Sultan Chand & Sons , Title: Probability Theory: An Advanced Course (Paperback). Author: Borkar V.S. Publisher: Springer , Title: A Second Course In Probability (Paperback). Author: Sheldon M. Ross And Erol A. Peköz Publisher: Cambridge University Press , Title: Probability Theory Paperback. Author: Sinai Publisher: Springer-Verlag , Title: Introduction To Linear Regression Analysis. Author: Douglas C. Montgomery, Elizabeth A. Peck, Et Al. Publisher: Wiley , Title: Understanding Regression Analysis (Paperback). Author: Andrea L. Arias And Peter H. Westfall Publisher: Crc Press , Title: Logistic Regression: A Self-Learning Text. Author: Kleinbaum D.G. Publisher: Springer , Title: Statistical Learning From A Regression Perspective . Author: Richard A. Berk Publisher: Springer , Department Ofphysics , Title: Descriptive And Inferential Statistics Using R. Author: Dabas Preeti Publisher: Sultanchand & Sons , Title: Fundamentals Of Mathematical Statistics. Author: Gupta Sc & Kapoor Vk Publisher: Sultan Chand & Sons , Title: Fundamentals Of Applied Statistics. Author: Gupta Sc & Kapoor Vk Publisher: Sultan Chand & Sons , Title: Problems & Solutions In Mathematical Statistics. Author: Gupta Sc, Gupta Vikas & Gupta Sanjeev Kumar Publisher: Sultan Chand & Sons , Title: Probability Theory: An Advanced Course (Paperback). Author: Borkar V.S. Publisher: Springer , Title: A Second Course In Probability (Paperback). Author: Sheldon M. Ross And Erol A. Peköz Publisher: Cambridge University Press , Title: Probability Theory Paperback. Author: Sinai Publisher: Springer-Verlag , Title: Introduction To Linear Regression Analysis. Author: Douglas C. Montgomery, Elizabeth A. Peck, Et Al. Publisher: Wiley , Title: Understanding Regression Analysis (Paperback). Author: Andrea L. Arias And Peter H. Westfall Publisher: Crc Press , Title: Logistic Regression: A Self-Learning Text. Author: Kleinbaum D.G. Publisher: Springer , Title: Statistical Learning From A Regression Perspective . Author: Richard A. Berk Publisher: Springer , Title: Multiple Regression And Causal Analysis. Author: Mckee J. Mcclendon Publisher: Waveland Press , Title: Bayesian Thinking In Biostatistics. Author: Rosner, Gary L; Laud, Purushottam W. And Johnson, Wesley O Publisher: Chapman & Hall , Library Requisition , Title: Computer Graghics(Multimedia &Lamination). Author:Malay K.Pakhira Publisher: Phi , Title: Quantum Mechanics. Author: S.P Singh M.K Bagde Publisher: S.Chand , Title: Statistical Mechanics. Author: R.K.Pathria Pauld.Beale Publisher: B-H , Title: Classical Mechanics. Author: Gupta,Kumar Sharma Publisher: Pragati Pravashan , Title: Cognitive Psychology. Author: Robert L.Solso Publisher: Pearson , Title: Organizational Behaviour. Author: Fred Luthans Publisher: Megraw-Hill , Title: Psychological Psychology. Author: Simon Green Publisher: Poutledge & Keegam-Paul , Title: The Human Nervous System. Author: Noback Publisher: Megraw-Hill , Title: Psychology. Author: Hockenbury,Hocken Bury Publisher: Worth Publisher , Title: The Demand For Money:Theories & Evidence. Author: David E.W.Laidler Publisher: Allied Publishers , Title: Contemporary Issues In Globalization. Author: Soumyen Sixdar Publisher: Oxford , Title: Development Policies,Problems And Institute. Author: Debes Mukherjee Publisher: Central Book Agency , Title: Economics Theory And Operation Analysis. Author: Willam J.Baumol Publisher: Phi , Title: Systems &Theories In Psychology. Author: Melvin H.Marx Willam A.Gronam-Hillix Publisher: Megraw-Hill , Title: Microeconomics. Author: Robert Pindyek Daniel Rubinfeld Publisher: Pearson , Title: An Introduction To Electro Chemistry. Author: Samuel Glasstone Publisher: East-West Press , Title: Organic Chemistry. Author: I.L Finar Publisher: Pearson , Title: Organic Chemistry. Author: Nan Publisher: Nan , Title: Quantum Chemistry & Spectroscopy. Author: Thomas Engel Publisher: Pearson , Title: Neurobiology. Author: Gordon M.Shephered Publisher: Oup , Title: Introduction To General Zoology. Author: Chaki,Kundu,Sarkar Publisher: New Central Book Agency , Title: Social Psychology. Author: Arun Kumar Sigh Publisher: Phi , Title: Fundamental Statistics In Psychology Education. Author: Guilford & Fruchter Publisher: Mcgrant Hill Intrio Education , Title: Plant Breeding Biometry. Author: Dipak Kr.Kar Soma Halder Publisher: New Central Book Agency , Title: Cell Biology Genetics. Author: Dipak Kr.Kar Soma Halder Publisher: New Central Book Agency , Title: A Text Book Of Botany. Author: Hait,Bhattacharya,Ghosh Publisher: New Central Book Agency , Title: Title: Dewey Decimal Classification Scheme 23Rded .4 Vol. Publisher: Oclc , Department Of Computer Science , Title: Computer Graghics(Multimedia &Lamination). Author:Malay K.Pakhira Publisher: Phi , Title: Quantum Mechanics. Author: S.P Singh M.K Bagde Publisher: S.Chand , Title: Statistical Mechanics. Author: R.K.Pathria Pauld.Beale Publisher: B-H , Title: Classical Mechanics. Author: Gupta,Kumar Sharma Publisher: Pragati Pravashan , Title: Cognitive Psychology. Author: Robert L.Solso Publisher: Pearson , Title: Organizational Behaviour. Author: Fred Luthans Publisher: Megraw-Hill , Title: Psychological Psychology. Author: Simon Green Publisher: Poutledge & Keegam-Paul , Title: The Human Nervous System. Author: Noback Publisher: Megraw-Hill , Title: Psychology. Author: Hockenbury,Hocken Bury Publisher: Worth Publisher , Title: The Demand For Money:Theories & Evidence. Author: David E.W.Laidler Publisher: Allied Publishers , Title: Contemporary Issues In Globalization. Author: Soumyen Sixdar Publisher: Oxford , Title: Development Policies,Problems And Institute. Author: Debes Mukherjee Publisher: Central Book Agency , Title: Economics Theory And Operation Analysis. Author: Willam J.Baumol Publisher: Phi , Title: Systems &Theories In Psychology. Author: Melvin H.Marx Willam A.Gronam-Hillix Publisher: Megraw-Hill , Title: Microeconomics. Author: Robert Pindyek Daniel Rubinfeld Publisher: Pearson , Title: An Introduction To Electro Chemistry. Author: Samuel Glasstone Publisher: East-West Press , Title: Organic Chemistry. Author: I.L Finar Publisher: Pearson , Title: Organic Chemistry. Author: Nan Publisher: Nan , Title: Quantum Chemistry & Spectroscopy. Author: Thomas Engel Publisher: Pearson , Title: Neurobiology. Author: Gordon M.Shephered Publisher: Oup , Title: Introduction To General Zoology. Author: Chaki,Kundu,Sarkar Publisher: New Central Book Agency , Title: Social Psychology. Author: Arun Kumar Sigh Publisher: Phi , Title: Fundamental Statistics In Psychology Education. Author: Guilford & Fruchter Publisher: Mcgrant Hill Intrio Education , Title: Plant Breeding Biometry. Author: Dipak Kr.Kar Soma Halder Publisher: New Central Book Agency , Title: Cell Biology Genetics. Author: Dipak Kr.Kar Soma Halder Publisher: New Central Book Agency , Title: A Text Book Of Botany. Author: Hait,Bhattacharya,Ghosh Publisher: New Central Book Agency , Department Ofzoology , Title:Genetics And Genomics In Medicine Author:Ronald Cohn Et Al., Thompson Publisher:Thompson, Elsevier , Title:Human Molecular Genetics. Author:Stachan Tgs (5 Th Edition) Publisher: , Title: An Introduction To Statistical Genetic Data Analysis. Author: Mc Mills Et Al. Publisher: , Title:Encyclopedia Of Aquarium And Pond Fish. Authordavid Alberton Publisher: , Title: Fundamentals Of Ecology And Environment. Author: P. Kumar And U. Mina, Pathfinder Publication, 4Th Edition Publisher: , Title: Environmental Science. Author:Botkin And Keller, Willey Publication, 8Th Edition Publisher: , Title: Environmental Science Author:G. Tyler Miller And Se Spoolman, Cengage Learning India Pvt. Ltd.16Th Edition Publisher: , Title:A Concise Textbook On Practical Zoology (04, Four Copies Required). Author:Som Dk Et Al.Rainbow Publishers Publisher: , Department Of Library , Title:Prosongo Manobibidya Author: Basabi Chakraborty Publisher: , Title:Nari Prithibi Bohushor. Author:Basabi Chakraborty Publisher: , Title: Nari Prithibi Bohuswar. Author: Basabi Chakraborty. Publisher: , Title:Womens Studies Various Aspects. Authorbasabi Chakraborty Publisher: , Title: Fundamentals Of Ecology And Environment. Author: Publisher: , Title:Nta Ugc Net Womens Studies. Author: Publisher:Ramesh Publishing House , Title:Gender Justice And Feminist Jurisprudence Author Ishita Chatterjee Publisher:Central Law Publications , Title:Womens Studies And Womens Movement In India. Author:Kusum Datta Publisher:The Asiatic Society , Title: Women And Law.Paperback Edition Author:Upasana Borah Publisher:Notionpress.Com , Title: Gender Trouble. Author:Judith Butler Publisher:Routledge , Department Of Psychology , Title:Miltenberger, R.G.(May 12Th 2011) Behaviour Modification: Principles And Procedures. Wadsworth Publishing Company Author: Publisher: , Title:Bar-On, R., & Parker, J.D.A.(Eds.) (2000). The Handbook Of Emotional Intelligence. San Francisco, California: Jossey Bros. Author:Basabi Chakraborty Publisher: , Title:Carr, A. (2004). Positive Psychology: The Science Of Happiness And Human Strength.Uk: Routledge Author: Publisher: , Title:Peterson, C. (2006). A Primer In Positive Psychology. New York: Oxford University Press. Author Publisher: , Title: Goldberger, I. &Breznitz,S.(1986). Handbook Of Stress: Theoretical And Clinical Aspect. The Free Press Collier Macmillan Publishers. London. Author: Publisher: , Title:Seligman, M.E.P. (2002). Authentic Happiness: Using The New Positive Psychology To Realize Your Potential For Lasting Fulfillment. New York: Free Press/Simon And Schuster Author: Publisher: , Department Of Bengali , Title:Kobor . Author: Munier Choudhury Publisher:Kamalini , Title: Bangladesher Kobita. Author: Sajjad Sharif And Ranajit Das (Ed) Publisher: Kamalini , Title: The Book Makers.A History Of The Book In Eighteen Remarkable Live Author:Adam Smyth Publisher: Penguin , Title: Pather Deshkal. Author: Swapan Chakravorty Publisher:Ababhas , Title: Rabijibani (10Th Volume). Author: Prasanta Kumar Pal Publisher: Ananda , Title:Sobuj Dwiper Raja. Author: Sunil Gangopadhyay Publisher: Ananda , Title:Pather Deshkal. Koyekti Pothon Author: Aniruddha Chakrabarti Publisher: Anustup , Title: Mudroner Sanskriti. Author: Swapan Chakravorty Publisher: Ababhas , Title: Bhaskar Chakrabary Kobita Somogro (Vol. 1 And 2) Author: Publisher:Deys , Title: 200 Bochore Marx. Author:Sobhanlal Duttagupta Publisher:Ananda , Title: Onubader Totto, Onubadoker Mon. Author:Sumita Chakrabarti Publisher:Ashadeep , Title: Alibabar Guptobhandar. Author: Sibaji Bandhopadhyay Publisher: Ekalavya , Title: Birendra Chattopadhyay Srestho Kobita. Author: Publisher: Dey’S , Title: Cinemapara Diye (2 Volumes). Author:Tarun Majumdar Publisher: Dey’S , Title: Sankha Ghosh Kobita Somogro (4Th Volume) Author: Publisher: Dey’S , Title: Jatiyotabader Sotyi-Mithye. Author:Partha Chatterjee Publisher: Anustup , Title: Ebar Kotha Prane Prane. Author: Amita Chatterjee Publisher: Ekalavya , Title: Greek Natok Songroho. Author:Sisir Das Publisher:Dey’S , Title: Bangla Sahittyer Itihas. Author: Anisujjaman (Ed) Publisher: Bangla Academy, Dhaka , Title:Alokranjan Goddyo Somogro (2Nd Volume) Author: Publisher: Prativas , Title:Utpal Dutta Goddyo Somogro (2Nd Volume). Author: Chaki,Kundu,Sarkar Publisher: Prativas , Title: Tarashankar Jibani (1St Volume),. Author:Debashis Mukhopadhyay Publisher: Setu , Title: Satovisha Sangkalan. Author: Publisher:Wriddhi , Title:Purashree. Author: Satyajit Roy Publisher: Calcutta Municipal Corporation , Title: Adhunikata O Rabindranath. Author: Bipan Chandraabu Syed Ayub Publisher: Deys , Title: Chitrito Padme. Author:Arun Nag Publisher: Deys , Title: Saratchandra : Punarbichar Author: Arunkumar Mukhopadhyay Publisher: Deys , Title: Manik Bandyopadhyay: Jibandrishti O Shilparitiauthor:Gopikanath Roy Chowdhury Publisher:Deys , Title: Tarashankar : Nirantar Desh Author: Debes Roy Publisher: Deys , Title: Bankim Yug Author: Purnendu Patri Publisher: Deys , Title: Babubrittanta O Prasangik. Author: Samar Sen Publisher: Deys , Title: Mancha-Chitrer Brittanta Parampara. Author:Suman Mukhopadhyay Publisher:Deys , Title: Kathashilpi Satyajit : Pratibha O. Author: Suravi Bandyopadhyay Publisher: Deys , Title: Bishay : Bigyapan. Author: Rangan Chakraborty Publisher: Deys , Title: Chalachhitra Manush Ebang Aro Kichuauthor: Ritwikkumar Ghatak Publisher: Deys , Title:Panthajaner Sakha. Author: Abu Syed Ayub Publisher: Deys , Title: Byaktigata O Naibyaktik. Author: Abu Syed Ayub Publisher: Deys , Title: Aathero Shataker Bangla Gadya.O Upanibesher Samajauthor:Debes Roy Publisher: Primus , Title: Bastubadi Baul . Author: Shaktinath Jha Publisher: Deys , Title: Banglasahitye Krishnakathar Kromobikash Author: Satyabati Giri Publisher: Deys , Title:Dwisatabarshe Bangla Sambadpatra Author: Swapan Basu(Ed)Publisher: Deys . , Title: Unish Sataker Bangla Chhapakhana. Author: Asish Khastagir. Publisher:Deys , Title: Srichaitanyer Antardhan Rahashya Author: Maliburo Publisher :Deys , Title: Metropolitan Mon : Moddhyobitto. Author: Binoy Ghosh Publisher: Orient Blackswan , Title: Bangla Bhashar Byakaran O Taar Kromobikash . Author: Kromobikash Publisher: Pustak Bipani , Title: Upabhasha Charchar Bhumika. Author:Manirujjaman Publisher: Bangladesh , Title: Bangla Bhashar Itibritto. Author: Muhammad Shahidullah Publisher: Bangladesh , Title: Hridayer Shabdaheen Jyostnaar Bhitorauthor: Buddhadeb Bhattacharya Publisher: Deys , Title: Bange Sufi Prabhab Author: Kshitimohan Sen Publisher: Bangladesh , Title: Banglar Baul. Author:Kshitimohan Sen Publisher: Viswabharati , Title: Banglar Baul : Kabya O Darshan. Author:Somendranath Publisher: Viswabharati , Title: Durer Madolauthor: Abdul Kafi Publisher: Tritiya Parishar , Title: Amalin Sholok Author: Abdul Kafi Publisher: Tritiya Parishar , Title: Bangla Upanyase Yubasamaj. Author: Urmi Roy Chowdhury Publisher: Bangiya Sahitya , Title: Uttal Challish : Asamapta Biplab. Author: Amalendu Sengupta Publisher: Pratibhas , Title: Galpa O Taar Goru Author: Arun Nag Publisher: Thima , Title: Ganayuger Dinpanji. Author: Arupkumar Das Publisher: Progressive , Title:Shaat O Sottor Dashaker Rajnitir Prekkhapotey Author: Arupkumar Das Publisher: Karuna , Title: Nakshalbadi Andolan O Bangla Sahitya. Author: Nirmal Ghosh Publisher:Karuna , Title: Bangla Rajnaitik Upanyaser Koekti Porjaai Author: Biswabandhu Bhattacharya Publisher:Manisha , Title: Ekaler Gadya Padya Andolaner Dalil Author: Satya Guha Publisher: Dhriti , Title: Deshbhag : Smriti Aar Sotta. Author: Sandip Bandyopadhyay Publisher: Progressive , Title: Ranakshetra Rajpath . Author: Sandip Bandyopadhyay Publisher: Anustup , Title: Uttar Prajanmer Khonj (1-3). Author: Manan Kumar Mondal Publisher: Nsou , Title: Dalit Nandantattwa Author:Sarankumar Limbaley Publisher:Tritiya Parishar , Title: Danga, Deshbhag O Udbashtu Samay. Author: Smridul Haque(Ed) Publisher: Mandaas , Title: Abrahman Purohit Author: Sushil Kumar Barman Publisher: Mandaas , Title: Raja Rammohan Roy. Author: Soumendranath Tagore Publisher: Mandaas , Title: Captain Sparkder Diary. Author: Joy Aichbhowmick Publisher: Mandaas , Title: Bigyapaney Bangali Author:Yashodhara Gupta Publisher:Khasrakhata , Title:Boipora Boipara. Author: Arun Sen Publisher: Pratikkhon , Title:Haraf Bichar :Bangala Type O Case Publisher: Bodhshabda Author: Arun Sen , Title: Ashruta Konthoswar Author: Sumanta Bandyopadhyay Publisher: Ekalabya , Title: Bankim- Manisha. Author: Aloke Roy Publisher: Ebang Mushayera , Title: Manik Bandopadhyay: Nirantar Manush Author: Debes Roy Publisher: Ebang Mushayera , Title: Satyajit, Ritwik, Mrinal O Anyanya. Author: Dheeman Dasgupta Publisher: Ebang Mushayera , Title: Bangla Bidyacharcha : Unish Satak Author:Nandita Basupublisher: Ebang Mushayera , Title:Bish Sataker Bangla Sishusahitya. Author: Manjaraita Chakraborty Publisher: Ebang Mushayera , Title: Samagra Manik : Dwandwer Dui Mukh. Author: Jugantar Chakraborty Publisher:Ebang Mushayera , Title: Upannyas Tattwa : Kichu Kotha. Author:Rabin Pal Publisher:Ebang Mushayera , Title: Pratibaader Sahitya Author: Saileshwar Ghosh Publisher: Ebang Mushayera , Title: Bangla Punthi Charchar Bhumika Author: Satyabati Giri Publisher: Ebang Mushayera , Title:Bangla Galpa O Galpakar. Author: Subal Samanta (Ed) Publisher: Ebang Mushayera , Title:Bangla Kabita : Shrishti O Shrasta. Author: Subal Samanta (Ed) Publisher: Ebang Mushayera , Title:Satyajiter Sahitya. Author: Kshetra Gupta Publisher: Abhijaan , Title: Ardheker Khonje. Author: Amrita Sarkar Publisher: Baibhashik , Title: Prabadmala. Author: Kalyani Dutta Publisher: Thima , Title: Badal Sircar : Ebang Indrajit Theke Third Theatre. Author: Shamik Bandyopadhyay Publisher: Thima , Title: Ashariri Abhidhan : Bharatiya Bhooter Sandhane Author: Wriksundar Bandyopadhyay Publisher: Dhansinri , Title: Surya Dighal Bari. Author: Abu Ishaque Publisher:Chirayata , Title: Bangladesher Sahitya O Sanskriti. Author:Biswajit Ghosh Publisher: Bangladesh , Title: Bangladesher Theatre . Author: Nripendra Saha ( Ed) Publisher: Bangladesh , Title: Bangladesher Kabita : Samabayi Swaratantra Author: Rafiqullah Khan Publisher: Bangladesh , Title: Bangladesher Chhotogalper Shilparup Author: Chanchalkumar Bose Publisher: Bangladesh , Title: Bhasha Andoloner Dalilpatra. Author: Steven L. Kaplan Ed. Publisher:Bangladesh , Title: Joaar Bhaatai Shaat - Sottor Author:Amalendu Senguptapublisher:Pearl Publishers , Title: Buddhijibir Noteboi. Author: Sudhir Chakraborty (Ed) Publisher: Pustak Bipani , Title: Rabindranather Jibansmriti Author: Baridbaran Ghosh(Ed) Publisher: Mitra O Ghosh , Title: Samasta Galpa(1-2). Author: Premendra Mitra Publisher: Deys , Title: Aloukik Galpasamagra. Author: Saradindu Bandyopadhyay Publisher:Ananda , Title: Byomkesh Samagra. Author: Saradindu Bandyopadhyaypublisher: Ananda , Title: Tebhaga Andolan. Author: Dhananjay Roy (Ed) Publisher: Ananda , Title: Crime Kahinir Kalkranti. Author: Sukumar Sen Publisher: Ananda , Title: Bishay: Chalachhitra. Author: Satyajit Roy Publisher: Ananda , Department Of Chemistry , Title: Fundamental Concepts Of Inorganic Chemistry (Vol. 1-7) Author: Asim Das Publisher: , Title:Fundamentals Of Chemistry-1 (Dasgupta & Co. Pvt. Ltd.) Author: Sulakshana Karmakar, Paramita Majumder Publisher:Anand Prakashan , Title: Supramolecular Chemistry. Author: J. M. Lehn Publisher: , Title: Essentials Of Nuclear Chemistry. Author: H. J. Arnikar Publisher: , Title: Supramolecular Chemistry. Author:J. W. Steel, J. L. Atwood Publisher: , Title: Application Of Microsoft Excel In Analytical Chemistry (2Nd Edition) Author:Stanley R Crouch, F. James Holler Publisher: , Titlefortran Programming (Techno India). Author: N. Bose Publisher: , Title:Physical Chemistry (Vol. 1-6). Author:K. L. Kapoor. Publisher: , Title: Mathematics And Computation- Applications In Chemistry (Sarat Book House/ Cu Publication) (Vol. 1, 2) Author:D. S. Ray, K. Bhattacharya, N. Bera, S. Ghosh, P. Ghosh Publisher: , Title: Stereochemistry With Applications To Organic Reactions, 2Nd Editionauthor: New Age International Publisher. Publisher: , Title: The Organic Chemistry Lifesaver (Vol. 1,2) . Author: Techno World Publisher: , Title:Introduction To Spectroscopy (5Th Edition) Author: Pavia, Lampman, Kriz And Vyvyan Publisher: , Department Of Hindi , Title: Samakalin Patrakarita Mulyankan Aur Mudde. Author: Rajkishor Publisher: Vani Prakashan , Title:Tulanatmak Sahitya. Author: Dr. Niraj Sharma Publisher:Anand Prakashan , Title: Loksahitya Chintan Ke Vividh Aayam. Author: Ranjana Sharma Publisher:Anand Prakashan , Title: Sahitya Aur Bhasha Chintan. Author: Ranjana Sharma Publisher: Anand Prakashan , Title: Hindi Bhasha Aur Mahavirprasad Diwedi. Author: Madhu Gautam Publisher:Lokbharti Prakashan , Title: Samachar Patron Ki Bhasha Author: Dr. Manik Mrigesh Publisher:Vani Prakashan , Title Sanchar Madhyam Lekhan. Author: Gaurishankar Raina Publisher: Vani Prakashan , Title:Adhunik Hindi Gadya Sahitya Ka Vikas Aur Vishleshan. Author:Vijaymohan Singh. Publisher: Bhartiya Gyanpith , Title: Hindi Bhasha Ka Itihas Author: Bholanath Tiwari Publisher: Vani Prakashan , Title: Rangmanch Ki Kahani:. Author: Dewendra Raj Ankur. Publisher: Vani Prakashan , Title: Ek Sau Dalit Atmakathaen Itihas Ewam Vishleshan . Author: Mohandas Naimisharay Publisher:Vani Prakashan , Title: Hindi Alochana Ka Saiddhantik Adhar Author: Krishnadatta Palival Publisher: Vani Prakashan , Title:Dasaven Dashak Ke Hindi Upanyason Mein Sampradayik Sauhard Author: Manjula Rana Publisher:Vani Prakashan , Title: Hindi Bhasha Ki Parampra Prayog Aur Sambhawanaen Author: Dayanidhi Mishra. Publisher:Vani Prakashan , Title:Hindi Alochana Itihas Aur Siddhant. Author: Yogendra Pratap Singh Publisher: Vani Prakashan , Title: Prayojanmulak Hindi Prayukti Aur Anuvad. Author:Dr. Madhav Sontakke Publisher: Vani Prakashan , Title: Prakriti Aur Antah Prakriti. Author: Ed. Prabhakar Hebbar Illat Publisher: Vani Prakashan , Title: Parywvaran Aur Samkalin Hindi Sahitya. Author: Ed. Prabhakar Hebbar Illat Publisher: Vani Prakashan , Title: Hindi Ka Parywarniya Sahitya. Author: Ed. Prabhakar Hebbar Illat Publisher: Vani Prakashan , Title: Vichar Ka Kapda. Author: Anupam Mishr Publisher:Rajkamal Prakashan , Title: Bhartiya Sahitya. Author:Dr. Prakash A.I Publisher: Vani Prakashan , Title: Adhunik Kavita Ka Punarpath. Author: Karunashankar Upadhyay Publisher: Radhakrishna Prakashan , Title: Adhunikta Aur Hindi Sahitya. Author:Indranath Madan Publisher:Rajkamal Prakashan , Title: Samakalin Hindi Kavita. Author: Vishwanathprasad Tiwari Publisher: Lokbharti Prakashan , Title: Chhayavad : Sau Sal Baad. Author: Ed. P. Ravi Publisher: Lokbharti Prakashan , Title: Hjindi Sahitya Aur Asmita Mulak Vimarsh. Author:Kiran Tiwari Publisher: Anand Prakashan , Title: Sahitya Mein Vimarsh Ke Vividh Ayam Author: Ed. Ajit Kumar Das Publisher: Anand Prakashan , Title:Adikal : Purani Hindi. Author: Dr. Suryaprasad Dixit Publisher: Lokbharti Prakashan , Title: Bhasha Vigyan Hindi Bhasha Aur Lipi . Author: Ramkishor Sharma Publisher:Lokbharti Prakashan
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 5
West Bengal View Result →
40.
Defence #10832999 Price Bid
Tender For Additional / Alternator To Swimming Pool And Other Works Under Age B/R Iii At Chandimandir; 1 Dubbing out average 20mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:4,including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified. 2 Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed. 3 providing cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate,as in foundations, filling and mass concrete etc., complete all as specified and as directed 4 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. 5 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base finished fair and rough without using extra cement, complete all as specified and directed. 6 Coloured non skid porcelain tiles exterior grade 300x300x 8-10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, complete all as specified and directed 7 Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. 8 Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 15mm thick in cement mortar 1:6, complete all as specified and directed 9 Coloured vitrified ceramic tiles, 10mm thick (square/rectangular ) , area of each tiles exc 0.18 Sqm but n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 10 20mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compelte all as specified and directed. 11 Kota Stone Slab flooring, 18-20mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. 12 Factory made machine pressed, pre polished, coloured chequered cement concrete tiles 250mm x 250mm x 20-22mm thick (with grey cement and no pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 13 Plain cement mortar 1:3:6 (type C-2 using 20mm graded aggregate), 75mm thick as in Plinth protection , finishing cement concrete even and smooth without using extra cement,all as specified.Note: 10mm construction joint will be provided and panel should not be more than 3metre in length and joint filled with filler bitumen and sand in ratio (1:3) 14 Two coats of oil bound distemper on wall surfaces over a coat of primer including preparation of new plastered surfaces complete all as specified and directed 15 Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. 16 Applying Two or more coats on new plastered surfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paintof required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. 17 Prepartion of new surface and applying two coat of premium acrylic emulsion weather proof exterior paint over a coat of primer complete all as specified and directed. 18 Rendering 15mm thick in Cement and Sand mortar 1:4 overfair faces of brick / concrete ,finished even and smooth without using extra cement, inclunding using water proofing compound complete all as specified.Note : WPC shall be measured and paid separately. 19 Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. 20 Rendering 15mm thickin Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. 21 PCC 1:3:6 type C-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed. 22 15mm thick (average thickness) rendering on roof surfaces inclduing flashings and junction of parapets etc finished even and fair in cement mortar 1:4 using water proofing compound as per manufacturers instruction after brushing cement slurry complete all as specified and directed 23 Supply only integral water proofing compound complete all as specified & directed. 24 3mm thick Atactic polypropylene polymer (APP) modified prefabricated water proofing membrane, based polymeric membrane minimum weighing 3kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished, complete all as specified & directed. 25 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete allas specified and directed. 26 Factory made steel window box type with side hung shutters including box type hinges and oneshop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc , complete all as specified. 27 Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square, area not exc 0.5 sq. mtr in each pane,complete all as specified and directed. 28 Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,including filling of PCC 1:3:6 in hollow frame complete all as specified and directed. 29 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated, all as specified and directed. 30 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 31 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge 32 Butt hinges 100mm size, of extruded aluminum alloy with galvanisedmild steel hinge pin, anodised, type C-21, complete all as specified and directed. 33 200 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 34 150 mm extruded aluminium handles cast typecomplete all as specified and directed. 35 Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. 36 Factorymade fixed type steel ventilator with glazing bar compelte all as specified and directed. 37 Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples, complete all as specified and directed. 38 preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 39 Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 40 Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. 41 Two coats of synthetic enamel paint over priming coat onnew stone and concrete surfaces of any description not otherwise described over 10 cm width or girth including preparation of new surfaces complete all as specified 42 Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed(Note : Colour/design and pattern shall be as decided by the GE) 43 Providing & fixing hangers of 6 mm dia. aluminium (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat of 40 x 3 mm size, 60mm long and expansion hold fasteners of 12.5mm dia, 40mm long with and including anodised aluminium snapgrid of size 605mm x 605mm, framed work for false ceiling with and including 4mm thick nonasbestos fibre cement building boardsfixed in aluminium framework with screws, complete all as specified and directed 44 Providing & fixing hangers of 6 mm dia. aluminium (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat of 40 x 3 mm size, 60mm long and expansion hold fasteners of 12.5mm dia, 40mm long with and including anodised aluminium snapgrid of size 605mm x 605mm, framed work for false ceiling with and including 4mm thick nonasbestos fibre cement building boardsfixed in aluminium framework with screws,fixed as in repair complete all as specified and directed 45 Rolled sections as in main and cross beams, hip and jack rafters,purlins where connectedto common rafters and running rails and guidesforsliding doors, fixedwithangle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed. 46 Mild steel framed work as in doors or gates of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O all as specified and directed. 47 Mild steel framed work as in doors or gates of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O including dismantling old iron all as specified and directed. 48 Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified & directed by Engineer-in-Charge 49 Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. 50 TMT bars for reinforcement, 6 to 8mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge. 51 Pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc , complete all as specified & directed by Engineer-in-charge. 52 Powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. 53 5.00mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels exc 0.5 Sqm in each pane, complete all as specified & directed. 54 Door closer hydraulically regulated aluminum (die cast) body, designation No 2, universal type, suitable for door shutters of 701mm to 850mmin width and of weight between 36 to 60 Kg,complete all as specified and directed. 55 Demolition of cement concrete (unreinforced) any description and in any position complete all as specified. 56 Demolition of stone slabs and tiles of any description or thicknessin floors laid, bedded and pointed in any mortar complete all as specified and directed. 57 Surface dressing n.exc 15cm deep in hard dense soil complete all as specified and directed 58 Hard core ofbroken stone or boulders of gauge of guage n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 59 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as speciied and directed. 60 Cement concrete type B-0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately). 61 Excavation in trenches in hard/dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc. or for shafts, wells cesspits, manholes, pier hole etc. and getting out, complete all as specified. 62 Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth , complete all as specified and directed. 63 Removal of excavated material to distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. 64 Reinforced cement concrete, 1:1½:3(nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in beams, cantilevers , bressumers,lintels over 1.5m span, all as specified and directed . (reinforcement shall be measured and paid for separately). 65 Reinforced cement concrete, 1:1½:3(nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in chajja and the like, complete all as specified and directed (reinforcement shall be measured and paid for separately). 66 Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified. 67 Form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintelsetc rough finished surface of concrete flat complete all as specified and directed. 68 Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete, all as specified. 69 Dismantling floor hearth or wall tiling including cementmortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed 70 Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. 71 12mm thick toughned glassas in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holeswith necessary screws/ beading, rubber packing, L patch bottom and top, self closing patch etc,complete all as specified and directed.NOTE : Decoratiion/Design or unit name, emblem, crest over glass shutter will be approved by Engr-in-Charge before executionand the rates are inclusive of the same 72 Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. 73 300 mm long stainless steel handle, fancy type , fixed to toughened glass, complete all as specified and directed. 74 Stainless steel lock for 10-12mm thick glass door, having knob inside with three keys, satin finish, complete all as specified and directed. 75 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. 76 Material and labour forpoint wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account.Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. 77 All as per serial item 76 herein before but for socket outlet 3 pin 6Amps on same board complete all as specified and directed 78 All as per serial item 76 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed 79 All as per serial item 76 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSHcable & 2.5 Sqmm (nominal area) cable as earth continuity conductor 80 Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. 81 Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. 82 Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. 83 Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. 84 Modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. 85 Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. 86 Lamp holder, PVC/Polycarbonate type with back plate modular type fixed on wall suitable for batten fitting ,complete all as specified and directed. 87 LED lamp9 watts, B-22 type complete all as specified . 88 Disconnecting the power supplyand taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCBs ,MCBs etcand removing from site, Complete all as specified and directed . 89 MCCB, 125 Amps, four pole, 3 phase , 16KA, 415 volt with adjustable thermal andmaganetic release, with proper thimble complete all as specified and directed 90 Vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 125 Amps & outgoing 4 way having IP 43 protection Complete all as specified and directed . 91 TPN distribution board double door flush mounting with provisions for MCB TPN 6 way, 415 volts having IP 43 protection Complete all as specified and directed . 92 MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed. 93 MCB, DP, 240 volt,32Amps, 10 KA , B series including connection with suitable size aluminium / copper lugs complete all as specified and directed 94 MCB, SP, 240 volt,40 to 63Amps, 10 KA , C series including connection with suitable size aluminium / copper lugs complete all as specified and directed 95 MCB SP , 240 volt, 6Amps to 32Amps, 10 KA , C series including connection with suitable size aluminium / copper lugs complete all as specified and directed 96 MCB , TPN/FP 40 to 100 Amp 415 volts, 16 KA , C series including connection with suitable size aluminium / copper lugs complete all as specified and directed 97 Single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP 20 Amp MCB complete all as speicified and directed. 98 Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and provision of flexible copper cable 3 core from ceiling rose tofan complete all as specified and directed. 99 LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed. 100 LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completecomplete all as specified and directed. 101 LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete fixed as in repair complete all as specified and directed. 102 LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size fixed as in repair complete all as specified and directed. 103 Exhaust fan energy efficient metallic blades heavy duty turbo force of size 300mm sweep, 1400 rpm, AC 230 volts complete with louvers shutters mounting on wall with holding down bolts, nuts, washerscomplete all as specified and directed. 104 Wall mounted fan PVC body, 400mm sweep, 230 volt , AC,quick start torque motor with copper winding complete all as specified and directed. 105 LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size ncluding taking down any type ceiling fittingcomplee all as specified and directed. 106 LED flood light fitting 100 Watt 6500K outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrision resistantincluding thermal management in multiple optics complete with IP 65 protectioncomplete all as specified and directed. 107 Suface mounting back lit LED 1 x 4 tile in CRCA housing with full opel diffuser for soft & glare free distribution panel with surge protection complete including cutting hole of required size in POP/false ceiling making good disturbedincluding taking down any type ceiling fittingcomplee all as specified and directed. 108 Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed. 109 Sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.NOTE: (i)Two runs of cable, one run of earth wireshall be considered as one running metre(ii) colour code shall be Red for phase, Black for neutral and green for earth 110 Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mmburried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe of20mm dia, GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete including dismantling of old earthing, all as specified and directed. 111 Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mmburried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe of20mm dia, GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), completeall as specified and directed. 112 LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,includinglamp bracket upto 1.5metre length as per suitable for fitting including clamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, including taking down old street lght complete all as specified and directed. 113 LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,includinglamp bracket upto 1.5metre length as per suitable for fitting including clamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection,complete all as specified and directed. 114 XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 3.5core, laid in trenches , sleeving through pipes of fixed on poles & wall or laid under floors inlcuding jointing with suitable size of alumunium lugs as specified and directed. 115 32mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS 14930 Part-II with anti rodent and non flame propogating properties of approved colour with fittings for cable protection from approval make complete , all as specified and directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
41.
Youth Affairs and Sports and Culture #10831072 Price Bid
Cricket Goods 2025 Iind Call E Tender For Purchase Of Cricket Goods And Equipment 2025 Second Call , Cricket Accessories & Others :- , Cricket Bat English Willow, Rs 5,000 To 8000 Bow Size - Standard Sweet Spot Location - Mid Willow Type - English Willow Cover Included - Yes Toe Guard - Yes Handle Type - Standard Handle Weight : 2Lb 10Oz To 3Lb Willow Type : English Willow Handle Type : 12 Piece Swark Cane Handle For Outstanding Feel, Flex And Control Body Features : Powerarc Blade With Contoured Edges, Unique Shock-Absorba Acttop Grip, Larger Sweet Spot For Extra Power In Stork Bat Size - Full Size , Cricket Bat English Willow (Rs-8001/- To 12500/-) • Selected English Willow Grade 4 • Air Dried Willow , • Designed As Per Specification Of World Top Player, • Latest Shape With Massive Concave Ton Edges Enable High Impact With Optimum Performance , • Embossed Retro Sticker With Superb Grip, • Wide Play Area With Clean Bat Face, • Premium / Portable Ss Bat Cover • Pride To Be Made In India , Cricket Bat English Willow ( Rs- 12501/- To 18500/-) • Finest English Willow Hard Pressed & Traditionally Shaped For Superb Stroke • Approx 5-6 Straight Grains • Imported Cane Handle With Special Formulation Cork Inserts For Enhanced Flexibility And Shock Absorption • Traditional Round Cane Handle For Superior Grip And Bat Control • Approx 1160-1200 Gm (2.9-2.11 Lbs) • Full Size Length Approx 85.7 Cm (33.7 Inches) • Depending On Player Height, Suitable For 15 Yrs+, If Height 171 Cms (5’6? And Above) • Available Sizes – Sh • Tested For Usage Against Leather Ball • Comes With A Coated Fabric Full-Length Bat Cover With Adjustable Carry-Straps , Cricket Bating Pad (Rs 2,000/- To 3,000/-) Ultralite Foam Pad Moulded To Fit Any Leg Perfectly And Half Of Weight In Comparsion To Traditional Legguard. Specification - Lh, Rh Pad Size Options - Boys, Mens, Youth , Cricket Bating Pad (Rs 3001/- To 4,500/-) • Made From Premium Quality Imported Polyurethane Facing • High-Density Sponge Filled Vertical Bolster With Tpu Insert For Knee Protection • Extra High Density Foam Filling In The Side Wings • Comes With Padded Straps • Mesh Instep With Hard-Wearing Piping • Added Protection On Top Hat • Available In Size Adult , Cricket Thigh Guard (Between Rs-600/- To 1100/- Superior Quality Thigh Pads Made From Premium Quality Material. Suitable For All Levels Of Play. Made From High-Quality Pvc Material High-Density Foam Inside Towel Back For Absorption , Cricket Thigh Guard (Between Rs. 1101/- To 1899/- • Combination Of Thigh Pad And Inner Thigh Pad • Made From Imported Pu Facing • Constructed From Microweight Uhdf With Polycarbonate Rainforcement. • Used By Top International Players • Soft Absorbent Polyester Back • Premium Quality Elastic Waist And Thigh Straps • Available For Both Right And Left-Handed Batsmen • Available In Size Adult, S. Adult, Youth & Junior , Cricket Helmet (Rs 2000/- To 3300/-) • Lightweight Shell Just Over 550 Gms • Carbon Outer Shell – Because Of Its High Flexural Strength Gives Tremendous Impact Resistance • Polystyrene Inner Shell – Because Of Good Dimensional Stability Dissipates And Absorbs Shocks Across The Entire Shell • Strategically Placed Ethylene Vinyl Acetate Foam Pads With Ventilated Airflows Known For High Durability And Sturdiness Even At Low-Temperatures. Is The Best Available Material To Withstand Impact Without Cracking Or Breaking • Ergonomically Designed Steel Visor For Maximum Safety And Individual Personalised Fit • Twin-Featured Inner Fabric Made Of High Sweat Absorbing Material With Special Mesh That Assists In Faster Sweat Evaporation • Washable Sweat Bands For Extra Protection, Comfort And Better Fitting • High Quality Multiple Layered Rear Protection System For Better Fitting And Comfort , Cricket Helmet (Rs 3301/- To 5500/-) • Features 3 Layers Protection • A Layer Of Rigid Pu Shell Sandwiched In Between Two Layers Of Fibre Glass And Epoxy • An Inside Comfort Layer With Epdm Padding And Soft Pu Foam Pads • Veicro Based Adjuster For Better Fitting • Moulded Eva Ear Pads Attached To Powder Coated Steel Face Guard • Size Available Junior And Senior , Cricket Wicket Keeping Gloves (3000/- To 4400/-) Made From The Finest Genuine Leather And Has All-Leather Palm, Cuffs, And Back. White Padded Towel Lining In The Cuffs Of Wicket Keeping Gloves. • High-Quality Wicket Keeping Glove • Made From The Finest Aniline Leather • All-Leather Palm, Cuffs, And Back • Superior Rubber In The Palm Facing • Towel Lining In The Cuffs , Cricket Wicket Keeping Gloves (4401/- To 5500/-) • Premium Quality Pair Of Professional Wicket Keeping Glove. • Made From The Finest Aniline Leather And Has All Leather Palm, Cuffs And Back. • Tricolor Octopus Design Rubber In Palm Facing. • White Padded Leather Cuff. • Available In Size Adult, Youth , Cricket Keeping Pads (Rs. 2500/- To 3500/-) Made From Finest Grades Of Polyurethane (Pu) And Other Raw Materials And Provide Double Sponge For Outstanding Comfort. New Look Design And Super-Lite In Weight. Stringent Grades Of Quality By Adhering To Well Defined Industry Norms. • Light And Sturdy In Construction • Flawless Finish , Cricket Keeping Pads (Rs. 3501/- To 5000/-) Top-Quality Lightweight Pad For Professional Cricketers High-Density Foam And Cane Construction For Shock Absorption Extended Side Wing With High-Density Foam For Extra Protection Compact Design With Tri-Section Shin Bolsters Wrap Comfortably Around Legs And Provides Reinforced Knee Protection (Rkp) With Tpu Insert On The Highly Sensitive Knee Area Premium Pu Facing Breathable Mesh Lines Bolster With High-Density Foam Leading To Enhanced Protection And Comfort 2 Wide Designed Straps With Padded Buckle Protection For Extra Comfort And Quick Fastening , Cricket Abdominal Guards (Rs. 150/- To 300/-) • High Impact Resistant Poly Protector. • Border Bound With Foam Casing Stuffed With Fluffed Cotton. • Strap-On. • Pin-Less Buckle System. • Elastic Leather Combination Straps For Added Comfort And Adjustments. • Shaped To Give Optimum Groin Protection. • Available In Size Adult. , Cricket T-Shirt White (Rs. 600/- To Rs. 1000/-) Premium Quality Knitted Lightweight Material, 100% Polyester Knitted Fabric, All New Drimaxx Technology (Moisture Management) For Keeping Dry And Comfortable, Mesh Panels For Optimum Ventilation, Excellent Stretch And Comfort, Size S,M,L,Xl , Cricket Pent White (Rs. 600/- To 1000/-) Premium Quality Knitted Lightweight Material, 100% Polyester Knitted Fabric, All New Drimaxx Technology (Moisture Management) For Keeping Dry And Comfortable, Excellent Stretch And Comfort, Size S,M,L,Xl , Cricket Kit Bag (Rs. 2000/- To 3500/-) • Size: 35”X 13.5” X 12” • Material: Waterproof • Color: As Per Requirement • 1 Main Large Compartment • 1 Separate Shoe Pocket • Front & Back Foam Padded • 2 Wheels Plastic Rail Strips For Better Ground Clearance , Cricket Kit Bag (Rs. 3501/- To 6000/-) Made From Premium 600 D Coated Materials. • Two Additional Outside Pockets And Front Shoe Compartments. •Can Be Carried As Backpack As Well As Trolley Bag. • Extra Reinforcement At The Bottom Of The Bag With Heavy Duty Pvc Material. • Foam Padded Adjustable Shoulder Strap For Carrying. • Premium Quality Zips For Better Durability. •Foam Padded Wall For Safety And Durability. • Small Pocket At The Top For Carrying Valuable Items. • Capacity Of Carrying 4 Bats Inside The Bag. • Size : 94 X 41 X 25 Cm. , Cricket Ball (Practice) Red ( Rs. 500/- To 800/-) Strong Alum Tanned Leather With Moulded Cork/Rubber Centre. ? Cover With Fine Linen Machine Stitching. ? P.U. Finish. , Cricket Ball (Practice) White (Rs. 600/- To 1000/-) • High Quality Four-Piece Cricket Ball Made From High Quality Alum Tanned Leather. The Club Red Is Ideally Suited For Club And School Matches. • Water-Proofed • Solid One Piece Grade 2 Core , Cricket Ball (Match) Red (Rs. 1200/- To 2000/-) • Most Superior Quality Conventional Cricket Ball In The Range. Specially Formulated Pre-Shaped Compressed Cork And Fine Rubber Center, Pure New Wool, Natural Cork Layer And Fine Leather Combine For Best Performance. Super Strict Quality Control Of Material And Construction Provides Superior Shape Retention And True Seam. • Water-Proofed • High Abrasion Resistance And Excellent Shape Retention. • Solid One Piece Core Made From Premium Grade 1 Rubberised Cork. , Cricket Ball (Match) White (Rs. 1500/- To 2200/-) • Most Superior Quality Conventional Cricket Ball In The Range. Specially Formulated Pre-Shapedcompressed Cork And Fine Rubber Center, Pure New Wool, Natural Cork Layer And Fine Leather Combine For Best Performance. Super Strict Quality Control Of Material And Construction Provides Superior Shape Retention And True Seam. • Water-Proofed • High Abrasion Resistance And Excellent Shape Retention. • Solid One Piece Core Made From Premium Grade 1 Rubberised Cork. , Pvc Coated Pitch Cover (Rs. 150/- To 195/-) 380 Gsm Economy 630 Gsm Professional , Pvc Coated Pitch Cover (Rs. 370/- To 580/-) 380 Gsm Economy 630 Gsm Professional , Bowling Machine (Rs. 325000/- To 425000/-) As Per Approved Bcci Specification , Surface Cricket Turf (Rs. 160/- To 230/-) Supply & Installation Of Artificial Grass , Cricket Batting Shoes (Rs. 2,750 To 3999/-) Made From A Combination Of Breathable Mesh Upper, Premium Rubber And Phylon Sole For Maximum Traction. , Cricket Batting Shoes (Rs. 4500 To 6999/-) Cushioning Technology In The Upper, High Grade Moulded Eva In Sock To Enhance Comfort, Uper Mesh With Phylon Sole, , Cricket Bowling Shoes/Spicks (Rs. 5000/- To 7000/-) Made From A Combination Of Breathable Mesh And High Peeling Pu, Heel With Shock Absorbing Foam For Superior Cushioning , Cricket Bowling Shoes/Spicks (Rs. 7001/- To 9990/-) Extra Durable Heel Counter For Shock Absorbing And Added Stability During Landing Phase, Extra Eva Lining Below The In Sock For Extra Comfort , Fusion Fielding Stump (Rs. 10000 To 15000/-) Base Made Ofrubber With 3 Stump And Two Bails , Run-Up Markers (Rs. 75/- To 200/-) (Collections /Training Equipment/ Products /Run-Up-Bowler-Markers) , Dumbbells All Categories (Rs. 160/- To 250/-) Made Of Steel/Rubber , Cap (County/Hat Round) (Rs. 500/- To 900/-) Cotton Cloth , Cricket Tennis Ball (Rs. 150/- To 190/-) • All-Weatherproof Rubber Composite Ball. . • Heavyweight/ Light Weight • Tennis-Ball Size • Solid Inner Core • Enduring Firmness • Perpetual Shape Retention , Cricket Bat Grip (Rs. 150/- To 250/-) High Quality Rubber & Colored Grip , Gripper For Finger Exercise (Rs. 250/- To 400/-) Plastic And Silicon Rubber Construction Adjustable Tension From 5-20 Kgs Excellent Grip For Hand Ideal For Hand And Forearm Strength , Balance Board (Rs. 1000/- To 2500/-) Wood & Plastic Construction Anti Slip Surface , Side Arm (Rs. 2000/- To 3500/-) Imported , Hanging And Knocking Ball/ I Ball (Rs. 250 To 390/-) • Pvc Ball With A Cord • Helps The Batsman In Practicing And Mastering Hand Eye Co-Ordination , I Bat (Rs. 1500/- To Rs.2500/-) • Half The Width Of A Normal Cricket Bat • Helps The Batsman In Practicing And Mastering The Art Of Middling Of The Ball, Both While Driving And Defending , Plastic Balls (High Level) , Weighted Balls (250Gm/300Gm) , Bowling Machine Bals (A/E) , Tennis Racket Babolet (Babolet Adult Carbon Fibre) , Pitch Roller (Diesel 2.5 Ton) , Pitch Roller (Electrical 1.5 Ton) , Rubber Pipe Dunlop (Dunlop 100M) , Dug Outs , Ground Umbrella , Adjustable Bench Ex , Plyometirc Box , Plastic Chairs
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
Madhya Pradesh View Result →
42.
Housing Urban and Rular Development #10819814 Price Bid
Procurement Of New Equipment For Water Lab Running And Maintenanace Of Water Lab Of Central Laboratory Ces Office Sub Work_Procurement Of New Equipment For Water Lab , Supply Of Ph Meter ( Bench Top ) Digital Display ( 0.14 Range ) ( Type Of Ph Meter - Portable Type - Digital Ph Range - 0.00 To 14.00, Power - Dc9v / 200M A ( Reputed Company ) , Supply Of Autoclave ( Medium Size Steel Cabinet ) , Temperature Range - 120 Degree C, Pressure Range ( Psi ) - 15-20Psi, Material - Stainless Steel Chamber Volume ( Ltr ) - 22-250 Ltr, Shape - Vertical, Insulation Wall - Double Wall, Triple Wall. ( Reputed Company ) , Supply Of Turibidimeter ( Direct Reading Range 0-100 Ntu, Accuracy: + 2% Of Measured Range + 0.01 Ntu, Repeatability: + 1% Of Measure Range + 0.01Ntu, No. Of Calibration Points: Up To 3 Points, Auto - Ranging For Fast Reaponse And Best Reolution. ( Reputed Company ) , Supply Of Digital Balance ( Single Pan Capacity ) 200 Gram Training Device Accuracy-0.0001 Gram. ( Reputed Company ) , Supply Of Uv-Visible Spectrophotometer ( Should Cover Wavelength Of Important Matrial Ions, Model - Lt-291, Brand - Labronics, Application - Industrial Use, Labortory Use, Education, Brand Width - 1 Nm, Photometeric Accuracy - + / - 0.1% T, Photometeric Display Range - 0.3-3.0A, - 200% T, 0 - 9999C. ( Reputed Company ) , Supply Of Filtration Apparatus Of Laboratory, Usage / Application - Laboratory Capacity - Up To 200Ml, Material - Borosilicate Glass, No. Of Nerck - 1 Pack Type - Box. ( Reputed Company ) , Supply Of Wate Still ( Stainless Steel Capacity 5 Ltrs / Hr ) , Material - Stainless Steelvoltage - 240 V, Power Source - Electric, Usage - Industrial, Capacity - 2-10 Ltrs, Power - 1500 - 8000 Watt. ( Reputed Company ) , Supply Of A Portable Photometer / S Using An Integral Coloimeter With Built In Automatically Deployed Color Filtration, Via Manually Selectable Programs For Testing Of 1. Alkalinity-M, 2. Alkalinity-P, 3. Ammonia, 4. Calcium Hardness, 5. Chloride, 6 Chromium, 7. Cod, 8. Copper, 9. Cyanide, 10. Fluoride, 11. Iodine, 12 Iron, 13.Mananese, 14. Molybate, 15. Nitrate, 17.Nitrite, 18. Oxygen Active, 19.Oxygen Dissolved, 20. Phosphate, 21. Potassium, 22. Silica, 23. Sulphate, 24. Sulphite, 25. Sulphite, 26. Suspended Soplids, 27. Total Hardness, 28. Otal Nitrogen, 29. Turibidty, 30. Urea , 31. Zine. A ) Along With Integrated Portable And Battery Powered Ec / Tds / Temp / Ph Meter With The Capability Of Field Testing And Reporting Of The Above Digilatly - Tested Parameters By Way Of Immediate Reading. B ) Provision Of Data Management Platform, Training Ad Tools To Enable Mobile Uploading Of Data Form Fields Sites. C ) Fully Automated, Paperless, Cellular Based Remote Monitoring Of Water Quality Sampling, Key Indicators Of Water Testing And Technician Performance. D ) Provision Of Mobile Smart Phones Or Equivalent For Revording Results And Automatic Transmission Of Data To The Secure Server For Online Reports. E ) Administrative Description, Sanitary Surveys And Gps Location Of Water Source Authomatcally Loaded On Web To A Souce Site. F ) The Supplier Has To Provide Mobile Phones Pre-Loaded With Water Quality Monitoring Software But Not Dependent On Any Make To Band Of Equipment And Provide Training Tools To Enable Mobile Uploading Of Data From Field Sites. Lobi Brand Or Equivalent Brand.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
Andaman And Nicobar Islands View Result →
43.
Educational and Research Institute #10815224 Price Bid
Procurement, Installation And Maintenance Of Infrastructure And Communication Technology (Ict) Equipment And Consumables Procurement, Installation And Maintenance Of Infrastructure And Communication Technology (Ict) Equipment And Consumablesprabodhini College, Porvorim, Goa. , Category 2: Ict Equipment’S Estimated Cost:59,88,000 /- , Digital Metal Podium Powder-Coated Metal Cabinet, Free-Standing, With Lockable Caster Wheels For Mobility; Crca Steel ~1.6 Mm Thick; Metal Top; Locking Security System; Storage Space For Cpu, Keyboard & Mouse, Laptop Trays, Side Shelf, 21.5? Interactive Touch Monitor; Motorised Tiltable Monitor Mechanism; Scratch-Resistant, Anti-Glare Screen; Full Hd (1920×1080) Resolution; Supports Finger & Stylus Input; Annotation Software Capabilities, Built-In 120 W Rms Amplifier; Two 30 W Wall Speakers; Two Gooseneck Microphones; One Wireless Handheld Mic; One Wireless Collar Mic; The Usual Av Input/Output (Vga, Hdmi, Usb, Aux, Xlr, Etc., Cpu: Intel I5; Ram 8 Gb; Storage: 500Gb Hdd; Wifi And Bluetooth; Includes Keyboard & Mouse., Vga, Hdmi, Usb, Aux, Xlr; Rj-45 Lan Port; Vga/Hdmi Switcher; Front Panel “Source” Control; Power Sockets Etc., Dimensions: 28? X 22? X 47? (L × W × H) ; Weight ~ 80 Kg, Minimum 1 Year Warranty , Smartboards Preffered Make:Viewsonic/Samsung/Solitaire Panel Size: 75,Type/Tech: Ips Type,Display Area (Mm): Minimum 1650.24(H) × 928.26(V),Aspect Ratio: 16:9,Native Resolution: 4K60hz,Colours: 10 Bits,Brightness: Minimum 450 Nits Or Higher,Contrast Ratio: 1200:1 (Typ) 5000:1 (Dcr) Or More,Response Time: 8Ms Or Better,Viewing Angles: H = 178, V = 178 Typ.,Backlight Life: Minimum 50,000Hr Of Higher Surface Treatment: Hardness: 9H Or Higher,Thickness: 4Mm,Orientation: Landscape,Processor: Octa Core Arm Cortex-A73*4 + A53 * 4 Or Higher,Android 11.0 And Upgarade To 13,Ram: 8Gb Ddr4 Or More,Storage: 64Gb Or More Type/ Tech: Ir Recognition/ P-Cap,Touch Point: 40 Points Or Higher,Hdmi In: Minimum 3,Rs232: X1,Ops: 1 Audio Out: 3.5Mm X1,Spdif: X1, Rj45: X2,Type A: Usb 2.0 X2, Usb 3.0 X4 “Smartport Usb” To All Channels,Type B: X2, For Touch,Type C: X1 (Dp 1.2, Usb2.0, Pd65w, Ethernet 100M),Speakers: 12W X 2 + 16W X 1 Or More Light Sensor : Yes,Power Consumption: 140W Or Less,Eye Care Certification Like Low Blue Light & Flicker Free Certifications: Tuv, Fcc, Energy Star 8, Emc/Ce, Cb, Rohs & Doc, Reach Test Report, Weee Test Report, Bis, Epat Software Features: Entity Management & Device Manager To Manage Ifp Remotely Without Lan, Also To Share Content & Broadcast Messages Remotely Onto Ifps,Same Whiteboard Software For Windows, Android & Browser,Live Webcast Directly From Interactive Whiteboard Software To Youtube And Facebook, Screen Recording,Artificial Intelligence Pen,Wireless Casting On Ifp From Mobile & Laptop,Drag And Drop Youtube Videos, Direct Images From Google Search,Handwriting Recognition Text To Speech Inbuilt In Whiteboard Software (Male Or Female Voice),Create Online Quiz With Time Limit From Whiteboard Software,Auto Grading Of Answers,Download Results As Excel Sheets,Sign In Directly From Qr Code On Interactive Whiteboard Software And Link Cloud Storages (Google Drive, Microsoft One Drive, Box Or Drop Box),4K Ops Module With Intel Core I5 Or Better, 8 Th Generation Or Better, 8 Gb Ram 256Gb Ssd Or Better. Ops Secification: 4K Ops Module With Intel Core I5 Or Better, 8 Th Generation Or Better, 8 Gb Ram 256Gb Ssd Or Better. Additional: Latest Microsoft Office And Ups , Video Conferencing Equipment- Webcamera Along With Wireless Speaker And Bluetooth Dongle Microphones For Large Classroom Setup- Evota Ultra-Wide 4K Resolution Camera For High-Definition Video Capture, Hd Support, Built In Microphone, And Microphone Wireless Speaker Phone With Bluetooth Dongle, Speaker Output, Ai Noise Reduction, 8 Mic Array, Built In Dsp,High-Quality Audio Output Suitable For Conference Or Meeting Rooms,Plug-And-Play Support , Camera And Lens- Preffered Make:Canon, Nikon Sensor: 24.2Mp Full-Frame Cmos Sensor,Processor: Digic X,Iso Range: 100–102,400 (Expandable To 50–204,800) Autofocus: Dual Pixel Cmos Af Ii With Up To 1,053 Af Points,Continuous Shooting: Up To 40 Fps With Electronic Shutter,Viewfinder: 2.36M-Dot Oled Evf,Display: 3.0 Vari-Angle Touchscreen Lcd With 1.62M Dots,Video: 4K Uhd At 60P, 10-Bit 4:2:2, Connectivity: Wi-Fi, Bluetooth, Uvc/Uac For Webcam Use Lens Format: Full-Frame,Focal Length: 24–105Mm,Aperture: F/4–7.1,Image Stabilization: Up To 5 Stops,Autofocus: Stm Stepping Motor For Smooth And Quiet Focusing,Macro Capabilities: Center Focus Macro With 0.5X Magnification,Minimum Focusing Distance: 0.66 Ft (0.20 M) In Autofocus; 0.43 Ft (0.13 M) In Macro Mode,Filter Size: 67 Mm , Dual-Channel Wireless Microphone System System Type: Dual-Channel Wireless Microphone System With One Receiver And Two Transmitters. Microphone Type: Built-In Omnidirectional Microphones In Each Transmitter; Supports External Lavalier Microphones Via 3.5Mm Trs Input. Transmission Technology: Series Iv 2.4Ghz Digital Transmission With 128-Bit Encryption. Transmission Range: Up To 200 Meters (Line Of Sight). Frequency Response: 50Hz – 20Khz. Maximum Spl: 100 Db Spl (1Khz @ 1M). Battery Life: Up To 7 Hours On A Full Charge. Charging Port: Usb Type-C. , Wireless Connectivity- Wifi Routers Wifi Routers- Tplink Archer C6 Dual Band Router,Dual-Band Wi-Fi: Supports Both 2.4 Ghz And 5 Ghz Frequencies , All In One Pcs Preffered Make: Hp / Dell /Lenovo I5- 13Th Gen 1355U Or Above,8 Gb ,512 Gb ,23.8 Diagonal, Fhd (1920 X 1080), Ips, Anti-Glare, Wled-Backlit, 250 Nits, 72% Ntsc,Win 11 Pro,Intel® Uhd Graphics; Intel® Iris® X? Graphics; Intel® Graphics,Wired,Microsoft Office 21 Or Above 3 -Years , Video Camcorder- Preffered Make:Canon, Sony 4K Uhd Recording,1/2.3 Cmos Sensor,Digic Dv 6,Mp4 And Xf-Avc (Mxf),4K Uhd (3840 X 2160) At Up To 30 Fps,Full Hd 1080P At Up To 60 Fpsuhd 4K Camcorder, Xf-Avc: Up To 160 Mbps,Mp4: Up To 150 Mbps,Iso/Gain: 0 To 24 Db,F/1.8 To F/2.8,Up To 800X,5-Axis Dynamic Is (Optical + Digital),2 X Xlr Terminals (With Phantom Power),3.5Mm Stereo Mini-Jack,16-Bit/48Khz Linear Pcm And Aac,Headphone Output, Lcd Screen,Touchscreen, Usb-C: Supports Uvc For Livestreaming,Hdmi Output: Mini-Hdmi 2.0, Recording Media: Dual Sd/Sdhc/Sdxc Uhs-I Slotsheavy Duty Tripod Stand For Video Camera , Drone- Weight: < 249 G Flight Time: Min 34–45 Minutes Camera: 1/1.3 Cmos, 48 Mp, 24 Mm F/1.7 Lens Video: 4K Up To 100 Fps, 1080P Slow-Motion Up To 200 Fps, 150 Mbps Bitrate Photo Formats: Jpeg, Raw (Dng) | Video Formats: Mp4, H.264/H.265, Supports Vertical Video Capture, Panorama Modes: Sphere, 180°, Wide Angle, Vertical, Remote Controller- 5.5-Inch Fhd Screen With A Resolution Of 1920×1080 Pixels, 60Hz Refresh Rate, And 700 Nits Brightness. Supports 10-Point Multi-Touch,Up To 1080P/60Fps Live Feed When The Aircraft Is In Photo Or Video Mode,4 Antennas, 2T4r (Two Transmitters, Four Receivers), Two Built-In Antennas And Two External Antennas With Manual Angle Adjustments For Optimal Video Transmission,Supports Quick Charging , Copier Machine: Preffered Make: Canon, Xerox, Ricoh Main Unit -Machine Type-A3 Monochrome Laser Multifunctional; Core Functions-Print, Copy, Scan, Send And Optional Fax; Processor Speed 1.6Ghz Dual Core Processor; Control Panel Standard: 7 Inch Tft Lcd Wvga Colour Touch Panel; Memory Standard: 2.0Gb Ram; Storage Standard: 64Gb Emmc,Optional: 256Gb Ssd; Interface Connection- Network Standard: 1000Base-T/100Base-Tx/10-Base-T, Wireless Lan (Ieee 802.11 B/G/N), Wi-Fi Direct Connection Others Standard: Usb 2.0 (Host) X2, Usb 2.0 (Device) X1; Paper Input (Standard); Paper Supply Capacity (A4, 80 Gsm)-Standard: 1,200 Sheets Maximum: 2,300 Sheets (With Cassette Feeding Unit-Aw1); Paper Output Capacity (A4, 80 Gsm)-Standard: 250 Sheets Maximum: 645 Sheets (With Inner Finisher-L1 And Copy Tray-T2); Finishing Capabilities -Collate, Group, Offset, Staple, Hole Punch, Eco Staple, Staple On Demand; Supported Media Types- Main Body Cassette (Upper/Lower): Thin, Plain, Recycled, Color, Heavy, Bond, Pre-Punched, Letterhead, Postcard Multi-Purpose Tray:Thin, Plain, Recycled, Color, Heavy2, Bond, Pre-Punched, Letterhead, Postcard, Labels, Coated, Tracing;Supported Media Sizes-Upper Cassette: Standard Size: A4, A5, A5r, A6r, B5custom Size: 105.0 X 148.0 Mm To 297.0 X 215.9 Mm Lower Cassette: Standard Size: A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r, Com 10 No. 10*, Monarch*, Dl* Custom Size: 105 X 148 Mm To 304.8 X 457.2 Mm; Supported Media Weights -Main Body Cassette (Upper/Lower): 52 To 256 Gsm Multi-Purpose Tray: 52 To 300 Gsm Duplex: 52 To 220 Gsm; Warm-Up Time -4 Seconds Or Less From Sleep Mode: 10 Seconds Or Less From Power On: 10 Seconds Or Less; Dimensions (W X D X H)- 565 X 687 X 891 Mm; Installation Space (W X D)-1,286 X 1,116 Mm (With Dadf-Ba1 + Inner Finisher Tray Max Extended + Copy Tray-T2 Max Extended + Paper Cassette Opened; Weight -Approx. 66 Kg Print Specifications-Print Speed:Up To 45 Ppm (A4, A5, A5r, A6r), Up To 22 Ppm (A3), Up To 32 Ppm (A4r),Print Resolution (Dpi):Up To 1200 X 1200;Page Description Languages;Standard: Ufrii, Pcl6, Optional: Adobe Postscript 3Tm; Double-Sided Printing: Yes; Direct Print: Pdf, Eps, Tiff/Jpeg, Xps; Mobile / Cloud Printing: Airprint, Mopria, Canon Print Business, Uniflow Online And Universal Print By Microsoft; Fonts : Ps Fonts: 136 Roman Pcl Fonts: 93 Roman, 10 Bitmap Fonts, 2 Ocr Fonts, Andalé Mono Wt J/K/S/T (Japanese, Korean, Simplified And Traditional Chinese) , Barcode Fonts Print Features: Secure Print, Secure Watermark, Header/Footer, Page Layout, Duplex Printing, Mixed Paper Sizes/ Orientations, Toner Reduction, Poster Printing, Forced Hold Printing, Print Date, Scheduled Printing, Printing Using A Virtual Printer Operating Systems :Ufrii: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022, Mac Os X (10.13 Or Later) Pcl: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022 Ps: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022, Mac Os X (10.13 Or Later) Ppd: Windows 10/11, Mac Os X (10.13 Or Later) Copy Specifications :Copy Speed Up To 45 Ppm (A4, A5, A5r, A6r), Up To 22 Ppm (A3), Up To 32 Ppm (A4r),First-Copy-Out Time:5.3 Seconds; Copy Resolution (Dpi):600 X 600; Multiple Copies: Up To 999 Copies; Copy Density: Automatic Or Manual (9 Levels); Magnification:25% - 400% (1% Increments); Preset Reductions: 25%, 50%, 70%, 100% (1:1), 141%, 200%, 400%; Preset Enlargements:25%, 50%, 70%, 100% (1:1), 141%, 200%, 400%; Basic Copy Features: Preset R/E Ratios By Area, Two-Sided, Density Adjustment, Original Type Selection, Interrupt Mode, Book To Two Pages, Two-Sided Original, Sort, Job Build, N On 1, Different Size Originals, Sharpness, Erase Frame, Copy Id Card, Skip Blank Pages, Free Size Original, Color Mode, Reserved Copy, Copy Sample; Scan Specifications:Type: Color Scanner; Pull Scan Specifications: Colour Network Scangear2. For Both Twain And Wia Supported Os: Windows 10/11/Server2012/Server2012 R2/Server 2016/Server 2019/Server2022; Scan Resolution (Dpi): Scan For Copy: 600 X 600 Scan For Send: (Push) 600 X 600 (Smb/Ftp/Webdav/Ifax), (Pull) 600 X 600 Scan For Fax: 600 X 600; Document Feeder Paper Capacity (80 Gsm): Up To 100 Sheets; Acceptable Originals/Weights: Platen: Sheet, Book, 3-Dimensional Objects Document Feeder Sheet Media Weight : 1-Sided Scanning: 38 To 128 Gsm (Bw), 64 To 128 Gsm (Cl) 2-Sided Scanning: 50 To 128 Gsm (Bw), 64 To 128 Gsm (Cl); Supported Media Sizes: Platen: Max. Scanning Size: 297.0 X 431.8 Mm Dadf: A3, A4, A4r, A5, A5r, B4, B5, B5r, B6, Custom Size: 139.7 X 128.0 Mm To 297.0 X 431.8 Mm; Scan Method:Push Scan, Pull Scan, Scan To Network, Scan To Usb Memory Key, Scan To Mobile Device, Scan To Cloud-Based Services (Uniflow Online); Scan Speed:1-Sided Scanning: 70/70 (300 X 300 Dpi, Send), 51 /51 (600 X 600 Dpi, Copy) 2-Sided Scanning: 35/35 (300 X 300 Dpi, Send), 25.5 /25.5 (600 X 600 Dpi, Copy); Double-Sided Scanning: Yes;Supported Media Sizes: Platen: Max. Scanning Size: 297.0 X 431.8 Mm Dadf: A3, A4, A4r, A5, A5r, B4, B5, B5r, B6, Custom Size: 139.7 X 128.0 Mm To 297.0 X 431.8 Mm; Scan Method:Push Scan, Pull Scan, Scan To Network, Scan To Usb Memory Key, Scan To Mobile Device, Scan To Cloud-Based Services (Uniflow Online); Scan Speed:1-Sided Scanning: 70/70 (300 X 300 Dpi, Send), 51 /51 (600 X 600 Dpi, Copy) 2-Sided Scanning: 35/35 (300 X 300 Dpi, Send), 25.5 /25.5 (600 X 600 Dpi, Copy); Double-Sided Scanning: Yes; Send Specifications- Optional / Standard-Destination: Standard: E-Mail/Internet Fax (Smtp), Smb3.1.1, Ftp, Webdav,Optional: Super G3 Fax;Address Book / Speed Dials: Ldap (2,000)/ Local (1,600) /Speed Dial (200); Send Resolution (Dpi):Push: Up To 600 X 600 Pull: Up To 600 X 600; Communication Protocol: Ftp (Tcp/Ip), Smb3.1.1 (Tcp/Ip), Webdav Email/Ifax: Smtp(Send), Pop3(Receive); File Format: Standard: Tiff (Mmr), Jpeg Pdf (Compact, Searchable, Pdf/A-1B, Encrypted), Xps(Compact, Searchable), Pdf/Xps (Device Signature, Office Open Xml (Powerpoint, Word) Optional: Pdf (Trace & Smooth), Pdf/Xps (User Signature); Universal Send Features:Original Type Selection, Two-Sided Original, Book To Two Pages, Different-Size Originals, Density Adjustment, Sharpness, Erase Frame, Job Build, Delayed Send, Preview, Job Done Notice, File Name, Subject/Message, Reply-To, E-Mail Priority, Tx Report, Original Content Orientation; Fax Specifications- Optional; Modem Speed: Super G3: 33.6 Kbps G3: 14.4 Kbps; Compression Method: Mh, Mr, Mmr, Jbig; Resolution (Dpi):200X100dpi (Standard), 200X200dpi (Fine), 200X400 Dpi (Super Fine), 400X400 Dpi (Ultra Fine); Sending/Receiving Size: Sending: A3, A4, A4r, A5*1, A5r*1, B4, B5*2, B5r*1 Receiving: A3, A4, A4r, A5r, B4, B5, B5r *1 Sent As A4. *2 Sent As B4 Short.; Fax Memory: Up To 30,000 Pages (2,000 Jobs); Fax Features:Senders Name (Tti), Selecting The Telephone Line (When Sending Fax), Direct Send, Delayed Send, Preview, Finished Stamp, Job Done Notice, Tx Report, Interrupt Transmission, Sequential Broadcasting, Password/Sub-Address Sending, Confidential Mailbox Store Specifications- Memory Media: Standard: Usb Memory, Security Specifications; Authentication & Access Control: User Authentication(Picture Login, Picture And Pin Login, Username And Password Login, Function Level Login, Mobile Login), Department Id Authentication(Depertment Id And Pin Login, Function Level Login), Uniflow Online (Pin Login, Picture Login, Picture And Pin Login, Card Login, Card And Pin Login, Username And Password Login, Depertment Id And Pin Login, Function Level Login), Access Management System(Access Control);Network Security:Tls 1.3, Ipsec, Ieee802.1X Authentication, Snmpv3, Firewall, Functionality(Ip/Mac Address Filtering), Wpa3 Support (Wi-Fi), Dual Network Support(Wired Lan/Wireless Lan, Wired Lan/Wired Lan), Enabling/Disabling(Network Applications, Remote Ui, Usb Interface), G3 Fax Separation From Lan, Usb Port Separation From Lan, Scan And Send -Virus Concerns For E-Mail Reception Document Security -Print Security(Secure Print, Encrypted Secureprint, Forced Hold Printing, Uniflow Secure Print 1),Receive Data Security(Confidential Fax Inbox Forwarding Received Documents Automatically), Scan Security (Encrypted Pdf, Device Signature Pdf/Xps, User Signature Pdf/Xps112), Send Data Security(Setting For Requesting Password Input Per Transmission, Restricted E-Mail/File Send Functions, Confirming Fax Number, Allow/Restrict Fax Driver Transmissions, Allow/Restrict Sending From History, S/Mime Support) Environmental Specifications- Operating Environment: Temperature: 10 To 30 °C (50 To 86 °F);Humidity: 20 To 80 % Rh (Relative Humidity); Power Source: Eur: 220-240V 50/60Hz 10A; Power Consumption: Maximum: Approx. 1,500W,Copying (With Dadf Continuous Scan): Approx. 666W (220-240V)*1,Standby: Approx. 28.1W (220-240V)*1,Sleep Mode: Approx. 0.8W*2,* 0.8W Is Not Available In All Circumstances Due To Certain Settings.,*1 Reference Value: Measured One Unit,*2 0.8W Is Not Available In All Circumstances Due To Certain Settings.,Typical Electricity Consumption (Tec): 0.48 Kwh*,*As Per Energy Star Version 3.0 Software & Printer Management- Tracking & Reporting: Uniflow Online; Remote Management Tools: Iw Enterprise Management Console Emaintenance Content Delivery System; Scanning Software: Network Scangear;Toner Cartridge/S: Toner C-Exv 67 Black; Toner Estimated Yield:33,000 Pages (A4), (Estimated @ 6% Coverage); Cassette Feeding Unit:Cassette Feeding Unit-Aw1: Paper Capacity: 550 Sheets X 2 (1,100 Sheets) (80 Gsm), Paper Type: Thin, Plain, Recycled, Color, Heavy, Bond, Transparency, Pre-Punched, Letterhead Paper Size: A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r,Custom Size: 105.0 X 148.0 Mm To 304.8 X 457.2 Mm,Paper Weight: 52 To 256 Gsm,Power Source: From The Main Unit Dimensions (W X D X H): 565 X 635 X 248 Mm,Weight: Approx. 16.0 Kg Output Options- Copy Tray: Check For Impacted Products.; Copy Tray:Inner 2Way Tray-M1:Tray Capacity (With 80 Gsm Paper):Upper Tray: Sra3, A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r: 100 Sheets,Lower Tray (Standard Tray): A4, A5, A5r, A6r, B5, B5r: Up To 250 Sheets,Sra3, A3, A4r, B4: Up To 100 Sheets Paper Weight: 52 To 300 Gsm, Dimensions (W X D X H): 428 X 405 X 88 Mm,Weight: Approx. 0.7 Kg, Inner 2-Way Tray-Copy Tray-T2:Capacity (80Gsm Paper):A4, A5r, B5, B5r: 100 Sheets,A3, A4r, B4: 65 Sheets,Dimensions (W X D X H): 444 × 373 × 176 Mm (Attached To The Main Unit, When The Extension Tray Is Extended),Weight: 0.5 Kg, Inner Finisher - Inner Finisher-L1:Upper Tray: Sra3, A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r: Approx. 45 Sheets,Lower Tray: A4, A5, A5r, B5: Approx. 500 Sheets Sra3, A3, A4r, B4, B5r: 250 Sheets,A6r: 30 Sheets,Envelope: 10 Sheets Paper Weight: 52 To 300 Gsm,Staple Position: Corner, Double,Staple Capacity: A4, B5: 50 Sheets (52 To 90 Gsm),A4r: 40 Sheets (52 To 90 Gsm),A3, B4: 30 Sheets (52 To 90 Gsm),Eco Staple: A3, A4, B4, B5: 10 Sheets (52 To 64 Gsm)/8 Sheets (65 To 81.4 Gsm)/6 Sheets (82 To 105 Gsm),Staple On Demand: Approx. 40 Sheets (80 Gsm) Dimensions (W X D X H): 727 × 525 × 225 Mm (Attached To The Main Unit, When The Extension Tray Is Extended),Weight: Approx. 9.1 Kg Hardware Accessories- Card Readers: Ic Card Reader Attachment-B4 Attachment Kit For Reader-A2; Print Accessories- Pcl International Font Set-A Ps Printer Kit-Bt1; Send Options: Universal Send Trace & Smooth Pdf Kit-A1 Universal Send Digital User Signature Kit-C1; Barcode Printing: Barcode Printing Kit-D1; , Audio Accessories-Ahuja Wired Mikes , Audio Accessories-Ahuja Cordless Mikes , Audio Accessories-Mike Stand (Tall And Small), , Audio Accessories-Cordless Mike Holder Cap, , Audio Accessories-Wired Mike Holder Cap , Audio Accessories-Jack To Jack Wired , Audio Accessories-3 Pin Xlr Male To Xlr Female , Audio Accessories-Universal Aaa And Aa Battery Recharger Adapter , Audio Accessories-Aa Recharge Batteries, Aaa Recharge Batteries , Audio Accessories-Mains Power Cable Cords
Contract Date: Ref. Documents Contract Value : Ref. Document
Private Organizations No of Bidders 3
44.
Defence #10801071 Price Bid
Tender For Comprehensive B R And Em Repair Maintenance Works To 14 Asc Af Kakkanad Under Age I R D Kochi; 1 Hacking out old broken glass panes 4 mm thick from steel frame including putty/ metal beadings and supply and fix sheet glass ordinary 4 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete all as specified and as directed 2 Hacking out old broken glass panes 4 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 4 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary oil putty/wooden beads complete all as specified and as directed. 3 S&F in repairs extruded aluminium anodised 150 mm long handles fabricated type. 4 All as per item No 3 above but 100 mm long. 5 Supply and fix in repairs foot operated door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring and cover plate overall length 150 mm including taking down defective foot operated door stopper all as specified and as directed. 6 S&F in repairsmortice lock brass 4 levers vertical type 100 mm 7 S & Fin repairs door closer hydraulically regulated, castiron body, designation No -3, universal type ,suitable for door shuttersof 851 to1000 mm in width and of wt between 61 to 80 Kg and fixed 8 Re securing and easing to wooden shutters of any description area n.exc 1 Sqm each without taking down the shutter all as specified and as directed. 9 Re securing and easing to wooden shutters of any description exc 1 Sqmbut n.exc 2 Sqm each without taking down the shutters all as specified and as directed. 10 S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long. 11 All as per item No 10 above but 100 mm long. 12 S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long 13 Taking down shutters exc 1 sq. m and n exc2 sq. m each and re-fixing in same openings. 14 Taking down shutters n exc 1 sq. m each and re-fixing in same openings. 15 S&F in repairs Butt hinges, medium weight cold rolled mild steel 100 mm size. 16 All as per item No 15 above but 75 mm size. 17 Taking down and removing to or from store chowkats or framesexc 1.5 sq. m and not exc 4 sqm each but with shutters (without taking off shutters from the frames) 18 S&F Solid PVC door frame of size 50mm x 47mm made of of 5mm plain color PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing. 19 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain color PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain color PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 20 S&F Aluminium, anodised, barrel tower boltsof extruded section and fixed length of bolt in 200 mm complete all as specified and directed. 21 S&F Butt hinges, medium weight, cold rolled mild steel, and fixed size of hinges in 100 mm complete all as specified and directed. 22 S&F Aluminium handles, cast type, anodised size of handle in 150mm 23 Supply and fix in repair PVC low level flushing cistern 10 liters capacity with ISI mark including inlet, ball valve, float, handle and brackets etc. including taking down old defective low level flushing cistern all as specified and as directed. 24 Supply and fix plastic seat and cover superior quality closed pattern with flat bottom of heavy duty including necessary hinged devices, including taking down damaged/ broken plastic seat and cover from EWC all as specified and as directed. 25 Supply and Fix in repair PVC connection with PTMT nuts of length 450 mm screwed for iron pipe15 mm bore. 26 Supply and fix in repair 15 mm dia CP pillar cocks fancy type for wash hand basin including taking down existing pillar cock, all as specified and as directed. 27 Supply and fix 150 mm square grating of PTMT to floor trap/nahani trap including taking down existing damaged CI grating from floor tap/nahani trap all as specified and as directed. 28 Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore pipe, all as specified and as directed. 29 All as per item No 28 above but 20mm bore. 30 All as per item No 28 above but 25/32 mm bore. 31 Supply and fix Unplasticised PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 32 Supply and fix Unplasticised PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 33 Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 34 S&F in repairs bib taps 15mm bore, cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed for iron pipe or for brass ferrule all as specified and as directed 35 S&F in repairs stop valves 15mm bore, cast copper alloy chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. 36 S&F in repairs vitreous china wash basin white flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper including brackets all as specified and as directed. 37 S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe). 38 Supply and fix tubular towel rail aluminium anodised20 mm dia D type 60 cm long between flanges including taking down defective aluminium tubular towel rail all as specified and as directed. 39 Supply and fix in repair beveled edgedmirror of size 600 x 450 mm selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. 40 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore. 41 All as per item 40 above but 110 mm bore 42 S&F PVC (SWR) bends any radius 75 mm bore 43 Supply and fix in repairs 100 mm dia CIfloor trap/nahani trap including taking down existing damaged CI grating from floor trap/nahani trap 44 M&L Dismantling water tanks and removing to store exc 250 & n exc 500 capacity 45 M&L Dismantling water tanks and removing to store exc 500 & n exc 1000 capacity 46 M&L Rotational moulded polyethylene water storage tanks 500 litres capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia PTMT Ball valve high pressure all as directed. 47 Allas per item No 46 above but 1000 ltr capacity 48 M & L for PU injection grouting by making necessary holes of 8 to 10 mm in concrete to a depth of about 75mm using proper electric hammer drill. Fix new nipples of 8 to 10mm using aluminum pipes using neat cement or M-Seal for proper anchorage. Carry-out pressure grouting using shaligrout 2k /equivalent) using a proper grouting pump. Seal the holes properly after the grouting nipples have been removed all as specified and directed by Engg -In Charge. 49 Material and labour for taking down old plaster and rendering 10mm thick in CM 1:6 on other than fair faces of brickor concrete surfaces finishing smooth and even and smooth without using extra cement making good match the old surface finish. 50 M&L two coat of OBD over a coat of primer on newly plastered surfaces of wall including cornices and preparation of surfaces. 51 M&L pre laminated particle board 12mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixture with screws to frame work 52 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge 53 M&L Screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge 54 M&L Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces, finished fair and even for receiving wall tiles. 55 S&F glazed ceramic coloured tiles 300 x 200 x 7 mm thickon vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over 10 mm thick rendering (backing coat)in cm 1:3, complete all as specified and directed by Engineer-in-Charge. 56 M & L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm In floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge 57 S&F Vitrified ceramic coloured tiles 10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match 58 S&F in repairs health faucet 15mm size chromium plated standard size all as specified and directed. 59 Supply and fixed in repairs stainless steel wire cloth, 0.63mm nominal dia of wire and average width aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples 60 M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removingthe debris with in a lead of 100 meters as directed by Engineer-in-charge. 61 M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge. 62 M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd. or equivalent) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge. 63 M&L for plastering with Nitobond SBR (Styrene butadiene polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd or equivalent) modified cement mortar (1:4) under the slab to an average thickness of 40 mm (applied in two layers not exceeding 20mm each) , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge. 64 M&L Preparation of newsurfaces of ceiling and applying two coats of distemper oil emulsion on ceiling over a coat of primer over 3 mm thick wall care putty plastered and other surfaces with alkali resistant priming paint complete all as specified. 65 Taking down cement plaster of any description on walls incl raking out joints, hacking for key scrubbing down with water 66 M&L for plastering in CM1:6, 10 mm thick on interior walls finished even and smooth w/o using extra cement. 67 M&L for plasteringin CM 1:3, 5mm thick on ceiling finished even and smooth w/o using extra cement 68 M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Professional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces . 69 M&L Preparation of Newsurfaces of internal walland applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 70 M&L Preparation of oldsurfaces of internal wall by complete removal of existing treatment , and applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 71 M&L Preparation of old surfaces of ceiling by complete removal of existing treatment, and applying two coats of distemper oil emulsion on ceiling over a coat of primer, plastered and other surfaces with alkali resistant paint complete all as specified. 72 Demolition of brick work / PCC block masonry work built in cement mortar etc complete all as specified. 73 M&L Precast Concrete block masonry with solid blocks in PCC 1:3:6 type C1 (using 20 mm stone agg) exc 10 cm in width and setting in mortar 1:4with minimum compressive strength of 5N/ sq mm complete all as specified and as directed. 74 M&L for providing and fixing Gypsum Board 12mm thick in walls fixed with screw as per manufacturer’s instructions complete all as specified. 75 Dismantling in Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified. 76 M & L Anodised aluminium snap grid frame work (size of grid 605x 605) mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified and as directed. 77 M&L for providing and fixing Exposed metal frame ceiling with fire resistant calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) fixed with screw as per manufacturer’s instructions complete all as specified. 78 Cleaning (mechanically)of sewage line/effluent drains 150/110 mm dia and disposing offthe sludge outside MoD land complete all as directed. 79 Removing the chokes in drains of WC/bath room/kitchen up to 1st manhole including cleaning of gully traps in single storey/ground floor of multi storeyed buildings, all as specified and directed. 80 Removing chokes in drains of WC/bath room/kitchen other than ground floor all as specified and directed. 81 Destruction of growth of weed plants with roots level on wall/ roof of building any height with weedicides such as Round up manufactured by Excel Chemical Industries and sprayed in and around roots and the place of possible growth of weeds as per manufacturer’sinstructions and making good the surfacescomplete all as specifiedand as directed. 82 Demolition of reinforced cement concrete in any position not otherwise specifically provided for 83 M& L for Precast RCC Cover slabs type B-1, 1:2:4 (20 mm graded stone aggregate as in slabs of drains including necessary form works. (Reinforcement bar will be measuredand paid separately). 84 M&L TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips 85 Demolition of cement concrete in any position not otherwise specifically provided for complete all as specified and directed. 86 M & L for 1:3:6 Type C-2 (using 40 mm graded stone aggregate) for surface channels anddrains all as specified 87 Extra for forming fair finished drain or channel 30 Cminner girth in cement concrete ,using extra cement, including forms, moulds, mitered /stopped endsetc 88 Opening manhole of septic tank remove night soil and sediments including liquid by mechanical pumping into tanker lorry having cleaning internal surface with water and re-fix the manhole covers, complete all as specified and directed. Notes :-(i)Volume of the manhole will be worked out based on the depth or actual depth of sludge, whichever is less.(ii) Water shall be procured by the contractor for cleaning purpose. 89 Demolition of cement concretein ground floors and pavings n.exc 15 cm thickness (below or above ground level) 90 M&L for 100mm thick PCC ( 1:3:6)type C-2,using 40mm graded stone aggregate as in hard standing/path/sub basefinished to an even and fair surfaces. 91 M&L forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade A. 92 Dismantling structural steel work incl doors, gates but excluding framed trusses. 93 S & FMS work in railings, balusters, posts and struts in fencing etc including cutting tops to shapeas directed, includingall necessary welding, drilling bolting or riveting etc and similar work conforming to FE 290 Gd E-165 complete all as specified 94 S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging with and including hooks and hinges, also fastening and fixing complete conforming to Fe-410W (Gde-E-250) 95 M&L for Point wiring for light point /fan point/Exhaust fan /Bell Pointwith 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate and cover with GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. including dismantling /removing of burnt cable/making good surface asrequired . 96 M&L for submain wiring for 5 Amp socket outlet point on independent board with 2x 1.5 sqmm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with multi standard copper conductors and earth continuity wire with similar 1x1.5 sqmm cable (incl connecting to earth dolly) drawn through and single core cable in surface/recessed medium class PVC conduit including dismantling /removing of burnt cable/making good surface as persiterequirement . 97 Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular switch and 5/6A modular socket ,connection etc. as required atsitecomplete all as specified and directed (for Independent 5 Amp socket ) . 98 M&L for wiring for circuit along with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit as required .wire 2x22.5 sq.mm + 1x2.5 sq.mm earth wire for 15/25 power plug/socket. 99 All as per item above but Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 A modular switch and 15/16A modularsocket ,connection etc. as required atsitecomplete all as specified and directed( for 15/16 Amp Socket ). 100 M&L for wiring for circuit along with 4 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface /recessed steel conduit as required .wire 2x4 sq.mm + 1x4 sq.mm earth wire (for Ac & Geyser ) 101 S&F Electronic ceiling fan regulator, modular type stepped /socket type heavy duty suitable to work on 230 volts complete all as specified and directed. 102 Supply & Fixing piano type 5/6 amps switch on the existing Switch box including connection as required on site. 103 Supply & Fixing piano type 2 way 5/6 amps switch on the existing Switch box including connection as required on site. 104 Supply & Fixing piano type 15/16 amps switch on the existing Switch box including connection as required on site. 105 Supply & Fixing piano type 3 pin 5/6 amps socket outlet switch on the existing Switch box including connection as required on site. 106 Supply & Fixing piano type 6 pin 15/16 amps socket outlet switch on the existing Switch box including connection as required on site. 107 Supply & Fixing 5/6 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 108 Supply & Fixing 15/25 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 109 Supply & Fixing 3 pin 5/6 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 110 Supply & Fixing 6 pin 15/25 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 111 Supply & Fixing modular bell push on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 112 Supply and fixing 1 or 2 module base & cover plate on existing modular metal boxes etc as required. 113 Supply and fixing 3 module base & cover plate on existing modular metal boxes etc as required. 114 Supply and fixing 4 module base & cover plate on existing modular metal boxes etc as required. 115 Supply and fixing 6 module base & cover plate on existing modular metal boxes etc as required. 116 Supply and fixing 8 module base & cover plate on existing modular metal boxes etc as required. 117 Supply and fixing LED light fitting 1X20W,220V high efficiency(efficiency up to 100lm/w) polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-20-30/40/65-SL-DP-NWHor GM/ Panasonic/Havells etc. 118 Supply and fixing LED light fitting 1X10W,220V high efficiency(efficiency up to 100lm/w)polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-10-30/40/65-SL-DP-NWH or Havells /Panasonic/GM etc. 119 S & F in repairs LED 20W T8 Tube within built driver and efficiency of 100lm/w having glare free lighting distribution, double sided connection, housing made of high grade polycarbonate cover, 2.5 KV internal surge protection, IP20 ingress protection, PCB mounted on extruded metal plate. Make: Crompton model No LT8-20-865-(2) or equivalent in Havells/C&S/ Phillips/Bajaj. 120 S&F switch socket combination 5 Amp with PVC box suitable for 230 Volt on surface. 121 S&F switch socket combination 15 Amp with PVC box suitable for 230 Volt in surface 122 M&L switch socket combination2 in 1, 6/16 Amp flush type in existing switch box. 123 All as per item above but 6 Amp flush type in existing switch box. 124 M&L forbell AC 230 V Single pole ding dong type. 125 Supply and fixing angular type batten holder insulator body of PVC/ polycarbonate type suitable for 10/9 W Led bulb. 126 Supply and fixing fan condenser / capacitor of size 2.25/2.5 suitable for ceiling fan of any sweep. 127 Supply and fixingonly LED lamp of 9 watt, Make : Crompton/ Havells /Panasonic 128 S&F of 20 Amps 240 V , SPN Industrial type socket outlet, with 2 pole and earth ,metal enclosed plug top along with 20 A C Curve ,SP MCB , in sheet steel enclosure ,on surface or in recess with chained metal cover for the socket outlet and complete with connections ,testing and commissioning etc. as required . 129 Supplying and fixing 6 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 130 Supplying and fixing 8 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB / RCCB/Isolator) 131 Supplying and fixing 4 way, Horizontal type , Three pole and neutral Dl sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 132 Supply and fixing of 5A to 32 A rating, 240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole in the existing MCB DB Complete with connections, testing and commissioning etc ax required. 133 Supply and fixing of 5A to 32 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc ax required. 134 Supply and fixing of 63 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of Triplepole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc as required. Make: IndoAsain, HSN Code: 8536, Cat. Nos.: 810107 or equivalent make of LT/ Havells. 135 M & L LED Square surface mounted Led Panel 12w, PDC housing and high translucent frosted plastic diffuser makes it a robust Luminar and efficiency up to 100lm/w. Make: Crompton, Model no LCDSPLN-R-12-CDL or equivalent make of GM/Havells. 136 M & L LED Round and Square recess mounted 12w LED edge lit slim down light with die cast aluminium housing finished in premium white coating and efficacy up to 100lm/w suitable for false ceiling. Make Crompton, Model no LSCRM-12W-WW/NW/ CDL or equivalent make of GM/Havells. 137 Dismantling and taking down ceiling fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying and re fixing the same in position, connecting and testingall as specified and directed. 138 M & L for carry out rewinding of ceiling fan motor of any size/ make including taking down from any height ,dismantling ceiling fan motor , removing old burnt winding wire, cleaning the armature thoroughly and replacing the same with new enameled copper wire of adequate size/gauge including class B insulation, varnishing heating etc, reassembling and removing the old painting and providing newpainting to ceiling fanscompletewith synthetic enamel Grey paintby spraying using machine including filling cavities with filler one coat after cleaning all dust making the surface in good finishes etc , testing, re-fixing the same in original position complete all as specified and as directed by the Engineer - in - Charge.Note: Rate include the taking down the ceiling fan and deposited to MES store for checkingand repairing) 139 All as per Item above but for the Exhaust fan of 300 /450 mm sweep sizes: 140 S & F in repairs of LED 36W surface full lit luminaire with glare free uniform illumination with longer life and less maintenance available in 2x2 ft (> 100 lm/w).Make: Crompton, Model No LCTLSNE-36-FO-WW/TL/CDL or Havells /C&S/ Phillips/Bajaj. 141 Supply andLayingGI tubing medium grade of size 50 mm with and including all fittings such as bends, elbows, tees, short pieces etc complete in trenches of following sizes after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. Note- Excavation & earth work will be measured & paid separately. 142 All as per item above but 40 mm bore 143 All as per item above but 25 mm bore 144 Supply & Fixing of Size 50 mm GI tubing medium grade withand including all fittings such as bends, elbows, tees, short pieces etc complete on wall and ceiling or laid in floors after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. 145 All as per item No 4 above but 40 mm bore 146 All as per item No 4 above but 25 mm bore 147 All as per item No 4 above but 20 mm bore 148 Repairs to leakage /damaged G.I. pipe of size 50/40 mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples ,Bends etc. all asdirected by Engr- in- charge. Note:- G.I. pipe length will be measured and paid separately under relevant item of sch A 149 All as per item above but 25/20 mm bore 150 Supply and fix in repairs gun metal gate valve of size 50 mm ISI marked with iron wheel head screwed both ends all as directed. 151 All as per item above but 40 mm bore 152 All as per item above but 25 mm bore 153 All as per item above but 20 mm bore 154 All as per item above but 15 mm bore 155 S&F in repairs un plasticized PVC pipe, 25mm bore of pressure rating 10 Kg/ Sqcm with all fittings, fixed to walls, ceilings or in floors complete with snap clips hooks etc and taking out old unserviceable one all as specified an as directed 156 All as per item above butof size 20 mm bore dia 157 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil forlaying/taking out GI pipe line all as specified and directed. 158 Returning filling in including spreadingleveling watering and well rammingin layer not exceeding 25 cm in soft/loose soil all as specified and directed. 159 Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mabove the starting point all as specified and directed. 160 M & L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside of the RCC Under Ground Sump of10,000 Ltrscapacity by dewatering the sump and cleaning the complete inner surfaces by rubbing / scrapping by wire brush to removethe sludge, washing with bleaching powder solution and then with water and draining out sludge, water completely including applying one coat of white wash to all the inner surfaces, and details of tanks like date of cleaning ,capacity of tanks etc shall be written on the outside of the tank with synthetic enamel paint with lettersize 20 cm high in white color , over a black backgroundof size 100x60 cmand charges included for pump set for de watering incl operator all as specified anddirected 161 M&L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside PVC Service tanks kept on roof top of buildings or on stagings, cleaning the surface using brush and other cleaning materials such as bleaching powder as required including writing the capacity of the tank and date of cleaning with white enamel paint over black back ground all as specified and directed for the following capacity of tanks at different locations on Technical/Residential Buildings all as specified and directed by Engr-in-Charge. 162 2000 Ltr capacity 163 1000 Ltr Capacity 164 500/300 Ltr capacity 165 S&F in repairs float Valve 40mm bore (Ball brass valves) high pressure type with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and taking out old unserviceable one all as specified and directed 166 All as per item above but of size 25mm bore 167 All as per item above but of size 20mm bore 168 S&F in repair/replacement HDPE Tank cover suitable for 300 to 1000 Litr capacity and taking out old unserviceable one 169 All as per item above but for 2000Ltr capacity tanks 170 M&L for repair/replacement ofFoot valve of size 50mmbrass heavy duty including taking up the suction pipe and re-fixing the same after replacement of foot valve in to the sump for proper functioning of pump and taking out old unserviceable one all as specified and directed 171 Dismantling of Mono-block Pump set from the existing position for servicing including opening the pump replacing the unserviceable ball bearings of suitable size for capacities up to 5 HP including greasing complete all as specified and directed 172 Repairs and servicing of Electric chlorine dozing Pump/ system Make Sathya sai Aqua Pura Services with Ant siphon valve including servicing of pump and motor with repair/ replacement of unserviceable parts like piston, stroke controller, suction and delivery tubing, PVC foot valve, nozzle, solution tank inlet, PVC water tubing 15mmbore, gate valve 15mm size etc, complete all as specified and directed. 173 M&L for cleaning of pump sets starter panel after dismantling the incoming and outgoing connections from MCCBs /MCBs and replacing the old unserviceable gland, lugs, nuts &bolts, push buttons, indicating lamps, supporting insulators etc, and checking the serviceability of MCBs cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed 174 M&L for Replacement of unserviceable DOL Starter suitable for motor up to 5 HPincluding connections 175 M&L for Repairing the old Valve pit of dimension 60x45x45 cm by taking out plaster and rendering with 10mm thick CM(1:4) including PCC (1:3:6) TYPE C2 on base, brick work inCM (1:4) as required and applying two coats of white wash on plastered surface including applying two coats of synthetic enamel paint over one coat of red oxide primer over steel surfaces after preparation, complete all as specified and directed 176 M&L for painting pump set including preparation old surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer including marking the signs, letters, Nos on the pump setof capacity up to 2HP all as specified and as directed. 177 M&L for painting of old painted GI pipe of any size on the external surfaces after preparation, located in and out of Pump House, by scrapping and cleaning of external surfaces and applying two coats of Sky Blue paint over a coat of red oxide primer complete all as specified and directed. 178 Dismantling , taking out complete burnt winding wire of submersible motor including cleaning of statorslots replacement of defective parts and rewinding with existing type & gauge ofcopper wireas per motor capacity and using new insulation material such as insulating paper sleeves etc. replacement of submersible cable as required length complete all as directed of rating 1.5/2HP Single phase 179 Repairs to leakage /damaged G.I. pipe of size 80 to 100mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples, Bends etc. all asdirected by Engr- in- charge. Note:- (i) G.I. pipe length will be measured and paid separately under relevant item of sch A 180 Material Labour for fixing Mechanical joint suitable 80 mm dia GI pipe, fabricated and made out of MS sheet of thickness 6/8 mm including welding work, rubber gasket, nuts, bolts and washers complete all as specified and directed by Engr in charge. 181 Comprehensive Maintenance, Servicing and carrying out periodical service to DG set along with AMF panel or standard panel like carry out oil service and routine checkup/maintenance as per manufacturers schedule, checking complete system of lubrication, cooling systems, air intake systems, fuel systems, exhaust systems, DC/AC electrical systems in DG Set as well as in AMF/Standard Panel, tightening bolts and nuts in engine and alternator related systems, etc and repairs including material for renewal/ replacement of minor defective parts of like connectors, MCBs , phase indication lamps etc for following capacity of DG sets all as specified and directed by Engr in charge. 182 35 KVA with AMF Panel installed at 14 ASC, AF Kakkanad 183 20 KVA with AMF Panel installed at 14 ASC 184 Note:The spares to DG Sets items as listed below as SUPPLY ONLY will be used whenever required only and it shall measured and paid separately under respective items. 185 The rate is inclusive of all items as required at site except those items as SUPPLY ONLY below to keep the DG Set along with AMF / Standard panel on monthly basis complete all as specified and as directed by Engr-in-Charge. 186 The contractor should attend any complaint / breakdown immediately on call basis and even no. of times without any extra cost. 187 Contractor should submit the inspection / maintenance report of every visit in spite of no of visits during breakdown calls including mentioning the status of DG Sets and spares any replaced 188 The old unserviceable spares replaced under comprehensive maintenance i.e. in sl No 02 of above BOQ is the property of contractor for which credit shall be deducted under respective items in schedule of credit. 189 All AMF panels and standard DG set panels should be well cleaned with CTC solution checking all the electrical connection and tighten for any loose connection. 190 Supply and replace of heavy duty diesel engine oil of 20W40 grade for DG Sets having capacities varying from 15 KVA to 35 KVA complete all as specified and as directed. 191 Supply only Lub Oil Filter for DG set 15 KVA to 35 KVA 192 Supply only fuel filter forDG set 15 KVA to 35 KVA 193 Supply only Oil pressure gauge for DG set of any size/make 194 Recharging of Battery 12 Volts , up to180 AH any make / type by replacing electrolyte including replacement of unserviceable terminal posts , to the required standard complete all as specified andas directed . 195 Diesel hose of size 5/16 all as directed 196 Battery terminals one end socket and the other end clamp type including brazing work and applying jelly over the battery terminal and pole all as directed by the Engr in charge 197 Water hoses complete set of engineDG sets of cap 15 to 35 KVA 198 Repairs to 12 V self starter of DG set engine by dismantling, removing and replacing the old defective/worn-out bearings, servicing including replacement of carbon brush, bendix drive, cleaning commutator in armature etc assembling and testing for satisfactory function all as directed. 199 Supply only auxiliary contactor suitable for AMF panel of 15 to 35 KVA DG set 200 Supply only power contactor suitable for AMF Panel of 15 to 35 KVA DG set 201 Supply, install, testing & commissioning in repairs DC relay card/ PLA relay 12/24 volt DC for DG set any capacity including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed by Engr-in Charge, 202 Supply and mixing water coolant in radiator water of DG Sets having capacities varying from 15 KVA to 320 KVA complete all as specified and as directed. 203 Repairs to door of acoustic enclosure of DG set cap 20 KVA by taking down and replacing the door hinges and door lock including all M&L and as directed. 204 Supply only distilled water into battery capacity of 12/24 Volt 88/90/180 AH all as specified and as directed by Engineer-in-Charge. 205 Taking out old burnt out Automatic voltage regulator from DG setcapacity 15 KVA to 35 KVA alternator and replace with new AVR and includingtesting and checking voltage regulation ofthe DG set on full loadfor its satisfactory performance complete all as specified and directed by Engineer-in-Charge:- 206 M&L for dismantling of complete radiator assy for DG Set capacity 15KVA to 35 KVA from engine and taking out all, de scaling rusty, sludge and muddy particles inside the radiator by using of sodium hydroxide with water pressure cleaning complete, changing of radiator fan belt if required and re-fixing the radiator assy on its existing position and testing complete for its satisfactory performance with entire satisfaction of Engineer-in-Charge:- 207 M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm buried directly in ground level with top edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanized iron strip 25mm x 4mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire babric (APM) weight not less than 4 Kg/ Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and as directed by Engr-in-Charge. 208 Providing and fixing 25mm x 5mm G.I strip in 40 mm Dia G.I pipe from earth electrode including connection with G.I Nut, bolt, Spring, Waher excavation and refilling etc. as required. 209 Supply & Fix in replacement MCB SP 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 210 Supply & Fix in replacement MCB SPN 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 211 Supply & Fix in replacement MCB TPN, 40 -63 Amp, C-curve, 415 volt AC complete all as specified. 212 Supply & Fix in replacement AMF controller, three phases, 50 Hz, AC, auto/manual/test/off mode with necessary display complete all as specified. 213 Material & Labour for dismantling the alternator of DG Set of capacity 20 KVA to 75KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connection of the alternator, shifting the alternator to workshop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the “F” class insulation and existing gauge and type of magnet wire which was on original motor, varnishing, heating, drying, greasing the bearing including replacement unserviceable bearing ,re-fixing the complete including connection to the terminal box of the alternator at workshop and shifting the same to the site, fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with engine connecting all electrical connection of the alternator and testing the DG set “OFF/ FULL LOAD” , matching to the existing range of RPM of the engine output voltage for 415 volt and testing complete all as per the direction of Engineer In Charge. 214 Material & Labour for taking down unserviceable heat insulation from exhaust piping and providing new heat insulation to exhaust pipe using 50 mm thick mineral wool inside the container & up to the exhaust stack. The insulation shall be cladded/ covered with 24G aluminium sheet. Pipe length shall be maximum up to12 Meter long from engineincluding necessary welding works, cladding works with wire mesh and aluminium foil, replace unserviceable supporting MC,angle iron 50 mm X 50 mm X 6 mm, suitable size flange, nut, bolt and washers as required includingweather cowl complete all as specified. 215 Material & Labour for dismantling carefully fuel injection pump (FIP) up to 6 cylinders engine of DG set and transporting to workshop, opening into parts, for maintenance, servicing, overhauling, tuning and calibration, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-assembling, re-fixing the FIP on its original position including to and from conveyance charge from site to workshop and back complete all as specified. 216 Material & Labour for dismantling exhaust manifold from the engine to detect the smoke leak, clean the manifold including welding works, replacement of unserviceable spares, packing, bellows, nut, bolt, washers, insulators, etc. reassembling and re-fixing on its base, testing by running the DG set No LOAD/FULL LOAD complete all as specified. 217 S&F in repair 1.5 Sqmm three core PVC insulated, unsheathed multi stranded copper conductor flexible cable 1100 volts grade complete all as specified and directed by Engr in Charge. 218 M&L for preparation of old paintedsurfaces of the DG set and fuel tankof following capacity by cleaning oily and greasy spots using CTC and material and labour for one coat of synthetic enamel paint using spray machine to the fuel tank and one coat of heat resistance paint to Engine / alternator complete all as specified and directed. 219 Note: - Colour code to be followed as under:-(i) Engine body - OG.(ii) Alternator - Siemens grey(iii) Fly wheel guard - Red(iv)Radiator -Black(iv)DG set canopy/complete body with two coats of superior qualitysynthetic enamel paint using spray gun (Area of painting not exceeding 3 sqm) including writingof incoming/outgoing feeder with letters, MES/SM Nos etc completeall as specified. For DG Set capacity 15 KVA to 35 KVA 220 M&L for disconnection of Diesel Oil tank with inlet and outlet diesel pipe line hose/pipe and cleaning of complete oil tank and drain out slug, muddy oil particle complete and re-fixing after at the same place and connecting complete with existing system including marking of tank showing the capacity in Ltrs and replacement of transparent PVC pipe complete all as directed by Engineer-in-Charge:-For DG Set capacity15KVA to 35KVA 221 Supply, install, testing & commissioning in repairs controller- Procom DGC-6D Auto Mains failure control Module including Display, replacing contactors/Connectors and making all electrical connections good and renewed for up to DG set 35 KVA as per existing make complete all as specified and directed by Engr-in-charge. 222 M & L for Servicing of split type Air-conditioning unit comprising Indoor and Outdoor unit of any make/type having capacity 1.0/1.5/2 TR including attending breakdown including required tools and plants,minor electrical sparer like small piece of wire, insulation tape , screws required to rectify the complaints by replacing the spare partsin technical andresidentialbuildingat 14 ASC Kakkanad. Note: Spares required is measured and paid as respective items in Schedule A and all specified and directed by the Engineer - In - Charge. 223 Supply and charge refrigerant gas R-32/R-410 at site including testing all as specified and as directed by Engineer in charge . 224 Supply only Capacitor 36/40 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 225 Supply only Capacitor 50/60 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 226 Supply only Capacitor 80/100MFD suitable for 230 V 50 HZ AC supplyall as specified and as directed by Engineer in charge . Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 227 Taking out existing burnt fan motor single phase 230 Voltfrom the unit at site by carefully dismantling the same, taking out burnt copper winding and rewinding the same with super enameled copper winding wire of appropriate size and gauge, including replacement of defective bearing and bushes of existing size and standard make including varnishing to copper winding re-assembling the motor and testing the motor at medium and full load complete for the followingall as specified and as directed by Engineer - in - Charge. 228 Splittype AC capacity up to 1.5 Ton 229 Split type AC 2.0 Ton Capacity 230 Taking out old unserviceable PCB and replace the same with new PCB at site suitable for window/split type AC of capacity 1/1.5/2 TR all as specified and directed by Engg-in-charge 231 Taking out carefully existing defective sealed unit compressorSupply & fixing factory made rotary type sealed compressor unit same as per existing model and make including charging the gas and testing & commissioning under normal condition of following rating complete all as specified and directed by Engineer - in - Charge. 232 (a) Split type Ac 1.5/2.0 Ton capacity 233 Removing the damaged insulation of suction and discharge line & Supplying and fixing new Thermal sleeve insulation for suction line and discharge line including providing hard plastic tape over the thermal insulation of split type A/C 1.5 / 2.0 Ton capacity etc complete all as directed by Engineer - in - Charge. 234 M&L in replacement of old unserviceable remote by providing new remote suitable for window type/ split type AC of any capacity/any make as specified and directed by Engineer in Charge. 235 Supply only new capacitor of Fan motor of 4 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 236 Supply only new capacitor of Fan motor of 10 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 237 Suply only split type AC indoor unit oscillation motorcomplete all as directed by Engineer - in - Charge. 238 Supply only thermostat for split type AC 1.0/1.5/2.0 complete all as directed by Engineer - in - Charge. Make: INDFOSS / RANTROL / ANNAPURNA. 239 Supply & fix in replacement of factory made MS bracket or Stand duly painted suitable for outdoor unit of split AC including making good disturbed surfaces etc. , all as specified andas directed. 240 M & L Removing the split A/c unit from existing position, of capacity 1.5/2.0 Ton of any make and refix the same in other location by fixing the indoor and outdoor unit in position on fixing on wall/ floor as directed including piping refix the insulation, Gas charging filling the cavities on wall setting of grills alignment complete including, testing & commissioning to the entire satisfaction of Engineer - in - Charge. 241 Supply and fixreplacement 240V 20 Amp singlepole and earth enclosure with a two pin and earth plug and socket complete with one single poleMCB20 Amp SPAll as directedEIC .Make: Legrand , Cat No: 6078 41/Equivalent in L & T/Indo Asian. 242 Taking down the old sub main wiring and M/L for new sub main wiring with 2 run single core 4.0 sq mmPVC unsheathed copper multi stranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow, saddles etc of white/lvorycolour PVC conduit including multi stranded copper earth conductor 4.0 sq mm one run as earth continuity conductor all as directed by Engineer in Charge. 243 Supply and fixing in replacement of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make: Havells Cat Part No ENDURAPEARLNEOSL45LED757PASYTOPC or its equivalent make of Crompton/Bajaj/HPL/GM. 244 Supply, fixing, connecting and testing in replacement of 150 Watt LED flood light 230 Volt AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Havells Cat No JETAIRISFLS150WLED757PSYMLTG or its equivalent make of Crompton/GM/HPL. 245 Supply and fixing in replacement to ground with suitable pole mounting with OD of 76 mm, connecting and testing 40 Watt LED Post Top Luminaire, 230 Volt AC outdoor type with decorative post top for 360° indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Crompton Cat Part No LPTO-40-CDL/M or its equivalent make of Havells/Bajaj/GM/HPL. 246 Supply and fixing passing through pole cable 3 core PVC insulated unsheathed multi stranded copper conductor of size 2.5 Sqmm from junction box to lightfitting all as directed by EIC. Make: Havells/Finolex/Poly cab. 247 Supply & fixing in replacement of transparent cover type street light junction box of size 168 mm x 253 mm x 115 mm made of high quality thermoplastic type with hinged and 4 Nos DIN mounted terminal suitable for 10 Sqmm XLPE cable, IP-66 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of poly-urethane with copper bus bar 25 x 5 mm -04 strip, one noMCB SP 6 Amps with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to, 10Sqmm cable etc and fixing to the street light pole with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed. Make: Hensel Cat Part No KG 9002 or its equivalent make. 248 M & L for removal of existing treatment from PCC poles and applying two coats of weather proof exterior emulsion paint on old painted surface over a coat of primer, complete all as specified and directed by Engineer-in-Charge. 249 M&L for cleaning of feeder pillar/ panel after dismantling the Incoming and outgoing connections from MCBs and replacing the old unserviceable Gland, lugs, nuts & bolts, push buttons, indicating lamps, supporting insulators etc., and checking the serviceability of MCBs, cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed by Engineer-in-Charge.Note: Spares / materials charge for repair/replacement of worn-out parts shall be measured and paid separately under relevant items. 250 S & F in replacement of MCCB 4 Pole 100-125 Amps 415V 16 KA 251 S & F in replacement of MCB TPN63Amp, 4 Pole, C Curve 252 S & F in replacement of MCB DP 32-40Amp, C Curve 253 S & F in replacement of MCB SP 6 to 32Amp, C Curve 254 Comprehensive Maintenance, Servicing and carrying out periodical service to Voltage Stabilizer, servo type of capacity 63 KVA, 3 phase, 50 c/s, AC including along withrepairing/ replacing of all defective parts such as nut-bolts, washers and all other minor accessories as required at siteall as specified and directed by Engr in charge. Notes: 255 (a) Any additional parts required to be replaced will be measured and paid separately as Supply only against appropriate item of schedule. However labour element and painting involved in replacement are included in quoted rate against this item. 256 (b) Any minor repairs involved to make the voltage stabilizer functional if notified by the Engr-in-Charge shall be carried out by the contractor without any extra cost to the department. (c) Following parts (if renewed) shall be measured and paid separately under appropriate items at Supply only rates and unserviceable parts retrieved through replacement shall be measured under Sch of credit. 257 Disconnecting the complete unit of Servo Controlled voltage stabilizer of capacity 63 KVA, 3 phase, 50 c/s, AC supply of Make- Volteck or as per existing make and overhauling of the same by cleaning, servicing all serviceable accessories including painting with two coats of synthetic enameled paint externally after rubbing of old loose paint along with writing SM No. and capacity on the face of stabilizer and making all connections at both ends including providing lugs on existing cable and testing on full load after completion of repair / overhauling work complete all as specified and directed.NOTE: - (i) Supply only spare parts shall be measured and paid separately under relevant items of this schedule. (ii)Transportation charge / labour charge during the repair of voltage stabilizer from the site to workshop are included in the items of this schedule 258 Supply only following spare parts of 63KVA capacity Servo Voltage Stabilizer complete all as specified and directed: - 259 AC synchronous motor single phase, 50 Hz, 240 volts Make:UNI STEP or equivalent make suitable for volteck servo . 260 Variable auto transformer (Variac). 261 Sensing Transformer. 262 Carbon brush with holder complete. 263 Solid state sensing circuit. 264 RC Net work. 265 PCB connector. 266 Gear big. 267 Carbon fingers. 268 Variac Control CT. 269 Main Bushing with brass rod (insulator & rod). 270 High low cut off relay. 271 Series transformer. 272 Wiring Set. 273 Gear small. 274 Transformers oil filtering with test 275 Replacement of electronic control board 276 Fixing of top cover after repair and testing up to entire satisfaction of Engr in Charge. 277 Supply, installation, testing and commissioning of street light timer control panel, on pole/wall/floor mounting made out of CRCA steel sheet duly powder coated with locking arrangement, including internal wiring complete with bypass arrangements as per manufactures recommendation and design complete all as specified and as directed.Make: Havells Cat Part No IHXTS09120 or its equivalent make of above specification. 278 S&F bracket for fixing to street light poles, made out of suitable dia for fitting of LED street light fittingsmedium grade GI pipe bend to shape inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paintall as directed by the Engineer-in- Charge. Make: TATA / Jindal / Surya Praksh. 279 Supply, install, test and commissioning of outdoor type double door LT Feeder pillar box made out of 3.15 mm thick CRCA sheet outdoor type totally enclosed weather dust and vermin proof as per IS , CPRI Approved with front opening suitable locking arrangement having copper bus bar of 300 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary PCC 1:3:6 in foundation and made out of 50 mm x 50 mm x 6 mm angle iron grouted at ground above 30 cm from ground level comprising of the following etc complete all as specified and directed by Engineer-in-Charge. Note: Cost of necessary internal wiring from bus bar to MCCBs/MCBs/Enclosure connections etc shall be deemed to be included in the unit rate. 280 Incoming:(a) MCCB 200 Amp 4 pole 36 KA Ics=100% of Icu with spreader & rom -01 No. (b) Indication Lamp Red/Yellow - 03 No (c) SP MCB 6A -03 Nos (d) MFM Meter with CT- 01 No (g) Provision for installation of KESB 3 Phase meter with necessary accessories. 281 Outgoings.(a) 125 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (b) 100 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (c) 63 A 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No.(d) 32 Amp 4 MCCB 16 KA, Ics=100% of Ics with spreader & rom -01 No. 282 M & L for re-filling of chemicals (minimum 25-30 ltrof Bentonite chemical / Graphite compound for each earth pit) in existing chemical earthing at technical area for achieving satisfactory earthing value with comprising of the Bentonitecomponents including necessary excavation/drilling for lift of cylindrical copper tubes from the ground and re-fixing the same by using Rig machine and providingenclosure with heavy duty plastic cover having locking arrangement including changing of electrode with pure copper chemical earthing electrode (length ofRod : 3 mtr Approx) for excellent conductivity & work efficiencycomplete all as specified and as directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 9
45.
Defence #10801064 Price Bid
Tender For Certain Provision Works In The Aor Of Age B/R-Ll Under Ge Kapurhtala.; 1 Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed by Engr-in-charge. 2 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed by Engr-in-charge. 3 Excavating over areas in soft/loose soil exc 1.5m deep and not exc 3.0 m deep and getting out complete all as specified. 4 M&L Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. 5 M&L Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. 6 M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed by Engineer - in - Charge 7 M&L for plain cement concrete (1:5:10) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete and as in sub base of floors complete all as specified and directed by Engr-in-Charge. 8 Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified. 9 Use & waste fair finished flat surfaces Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better 10 M&L for reinforced cement concrete Design mix M-25 (20mm graded aggregates) in Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses 11 Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of fdn and plinth beams and similar wk vertical or to batter for rough finished surfaces. 12 Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete. 13 Form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flats. 14 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;exceeding 200mm thick (Horizontal or sloping)all as specified and directed by Engr-in-charge. 15 RCC M-25 design mix as in fdn, including raft, fooling fdn beams, plinth beams bases for columns and mass concrete. 16 RCC M-25 design mix as inPlinth beams,Roof Beam, cantilivers, bressummers, lintel over 1.5m span all as specified and directed by Engr-in-charge.. 17 RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. 18 M&L for RCC M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, Chhajja and in shelves and the like complete all as specified and directed by Engr-in-charge. 19 M&L for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. 20 M&L for TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleetwire not less than 0.90mm dia complete all as specified and directed. 21 M&L for framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or Flat iron frame work for drain covers etc,complete all as specified. 22 Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates of Fe-290 grade E-250 complete all as specified. 23 S&F of GI steel expended metal of size 25*25mm cut to length, bent to shape required and tying with and including annealed mild steel wire galvanized, steel staples and fixed to wood or steel members, weight not exceeding 4 Kilogram per square metre complete all as specified. 24 S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. 25 S&F of Mild steel screw bolts 16mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long complete all as specified and directed by Engr-in-Charge. 26 M&L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed by Engineer-in-Charge. 27 M & L for Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed by Engineer-in-Charge. 28 M&L for Old size Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed by Engr-in-Charge. 29 M&L Brick work with sub class B burnt clay bricks (old size bricks) straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge . 30 M&L for flush pointing to brick wallswith CM 1:3 complete all as specified and directed by Engr-in-charge . 31 Providing cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in copings, kneelers, apex stones, bed plates etc including necessary form work complete. 32 Extra for forming fair finish to drain or channel of cement concrete, 30cm inner girth, using extra cement including forms moulds/mitered stopped ends etc. complete all as spd. 33 M&l for Pre-cast Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers , Drain Covers and set in cement mortar (1:4) including form work complete all as specified. (Reinforcement measured separately). 34 M&L painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth. 35 M&L for Boring 300mm Dia holes 10m deep in any type of soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 mComplete all as specified and directed.. 36 S&F of UPVC pipes (SCH-40) (Slotted) 150mm bore dia incl all necessary fitting Complete all as specified and directed.. 37 S&F of UPVC pipes (SCH-40) (Blind)150mm bore dia incl Plug Cap and all necessary fitting Complete all as specified and directed.. 38 M&L for filling 12.5mm Graded coarse aggregates in harvesting pit upto height 0.50m Complete all as specified and directed.. 39 M&L for filling 3mm to 5mm PEA Gravel in harvesting pit Complete all as specified and directed.. 40 M&L for filling Coarse Sand in harvesting pit upto height 0.50m Complete all as specified and directed.. 41 M&L for Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement including WPC @ 3% of wt of cement complete all as specified. 42 Ditto all as per item sl no 14 here-in-before butin cement mortar 1:6 complete all as specified and directed by Engr-in-charge. 43 M&L for Rendering 10mm thick on fair facesof concrete surfaces surfaces in cement mortar 1 : 3 as in ceiling finished even and smooth without using extra cementcomplete all as specified. 44 M&L for preparation of new plastered surfaces of walls and applying 2mm thick of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge 45 M&L applying two coats of exterior emulsion (Apex) paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation ofsurfaces, complete all as specified and as directed. 46 M&L for preparation of new plastered surfaces of ceiling and applyingthree coats of white wash on ceiling and wall complete all as specified and directed by Engr-in-Charge 47 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaceunder floor and plingh protection all as specified and directed by Engr-in-Charge. 48 M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)as in floor over hard core all as specified andm directed by Engr-in-charge. 49 M&L for 25mm thick plain Cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) as on roof paddings and to receive tiles all as specified and directed by Engr-in-charge. 50 M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement 51 M&L for Anti-Termite Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area 52 M&L for Anti-termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface 53 M&L for Anti-termite Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area 54 M&L for 40mm thick in cement concrete Mortar 1:2:4 type B-0, Damp proof course to horizontal or vertical surfaces including necessary formwork all as specified and directed by Engr-in-charge. 55 M& L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m all as specified and directed. 56 M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m all as specified and directed by Engr-in-charge. 57 Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 58 S&F 5.50mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads all as specified. 59 M/L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge 60 M&L for light shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed all as specified and directed by Engr-in-charge. 61 Ditto all as per item No 60 but in vertical surfacesover10mm plaster all as specified. 62 S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. 63 Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge 64 Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 65 S & F Aluminium (die cast body) Door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 66 Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as spd. 67 Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as spd. 68 Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) and applying two coats of aluminium paint above APP membrane surface , complete all as specified and directed. 69 Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 70 M&L for Sand filing under floors or in foundations including watering and consolidation 71 M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thick ness, M-40 grade with grey cemet and pigment over sand cushioning complete all as specified. 72 Removing excavated material n exc.50M and depositingwhere directed at a level n exc1.5m above the starting point Note : (i) Excavated earth is used for area required earth filling.(ii) Charges of labour for earth filling is not given seperately it is considered in this item . 73 M&L Precast cement concrete block masonary with solid block (size 30x20x10 cm) as in edging ,type B1 1:2:4(20 mm graded aggregate) exc 10 cm in width and setting in mortar 1:4 complete 74 M&L Reinforced concrete 300 mm dia pipe class NP-3 laid & jointed complete with collars, complete all as specified and directed. 75 Material and labour for point wiring complete with two 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated single core multistranded copper conductor common earth and connecting to earth dolly with suitable size of copper end connector for the following :- Note : (i) Colour code shall be maintained as per IE rule. 76 One light point controlled by one, one way switch 77 One fan point controlled by one, one way switch 78 One socket outlet 3 Pin, 5 Amp on independent board 79 One socket outlet 3 Pin, 5 Amp on same board. 80 M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 4.0 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. 81 S&Fswitch piano flush type single pole one way 5 Amp (ISI Marked) Make - Legrand/Schnider/Havells 82 S&F switch piano flush type single pole one way 15 Amp (ISI Marked) Make - Legrand/Schnider/Havells 83 S&F socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) Make - Legrand/Schnider/Havells 84 S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) Make - Legrand/Schnider/Havells 85 M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) Make - Legrand/Schnider/Havells 86 Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 2000 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. 87 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. Make Philips/Bajaj/C&S electric 88 Supply and install split AC indoor/outdoor 1.5 TR with in built Heating and Cooling operation and digital Inverter twin rotary compressor, AC,230V,single phase, with cordless remote control unitwith in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity and complete AC mounting stand along with clamps, nuts, bolts, washers etc. extra cooper tubing with proper insulation, PVC drain pipe of suitable length, Sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with MCB 20A, suitable for protection of appliances like AC/Geyser suitable for flush mounting and surface mounting complete all as specified. 89 Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. Make : Crompton/Havells/Philips. 90 Supply, install, testing and commissioning of commercial Air Curtains of size 40 x 90 unit for prevention of dust and conditioned air losses, single phase, 240 V, 50 Htzs made out of MS/CRCA 18 gauge finished with two coat of red oxide primer and final coat of synthetic enamel paint(oven baked) with square perforated suction greels, aluminium alloys fans and single phase electric motor, nozle etc, complete with fittings and accessories so as to produce 1 -1.5 m/sec air velocity at floor level for door openeing specified.all as specified and directed 91 Supply and fix Voltage stabilizer for automatic operation, single phase Each naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V-with accuracy of ± 2.5% and of capacity 4 KVA. 92 S&F of DB epoxy powder coated TP & N 4 ways (VTPN MCCB DB) with metal door (IP 54 IK 09 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 63 Amps as incomer and 12 SP MCBs or 4 TP MCBs (or any combination of SP/TP MCBS) outgoings complete all as directed. 93 S&F of MCCB, 63 Amp, Four Pole, 415 Volt Make - Legrand/Schneider-Acti 9/Siemens-Betagard 94 S&F of MCB,6 to 32 to Amp, SP , 230 Volt Make - Legrand/Schneider-Acti 9/Siemens-Betagard 95 Supply and fixing ceiling fans completewith blades, down rods and accessories, 230 V, 1200mm sweep. Min air delivery 210 CMMwith service value 6.00 BEE. Five starrated with brushless direct current motor(BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed. 96 S&F of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd 97 Supply, Installation and testing ofDesert Cooler electric driven (Single phase) for rooms up to 35 Sqm, large pad area for superior cooling, power ful fan , water tank capacity 51 ltrs including iron stand of suitable size as required to mount desert cooler on wall complete all as specified and directerd with following specifications :-Size of Desert Cooler - L x b x h 660 x 660 x 825 mm (26 x 26 x 32.5) ApproxFan Motor : (i) Fan motor should be copper winding, 500 mm Sweep Cooler fan, three speed (High/Medium/Low) with methalic blade duly painted with Snthetic anti corrosive oven cured paint fitted to body Fan motor Make : Bajaj/Khaitan/Crompton Greaves/GEC (ii) Input Cap 200 watt(approx), Speed 1400 RPM, 230 Volts, 50 Hz, Air Delivery 5000 Cum/HrsSubmersible Pump Motor: Input Cap 40 watt (Approx), Speed 1300 RPM, 230 volts, 50 Hz.Switches/Regulator: One Piano Switch and one Speed Selector Switch (Regulator) 04 Position for controll of Pump Motor and Fan motor respectively will be provided on the body.Pads : Wood wool Pads of proper Thickness will be provided in each panel (Set of three).Drain Plug : Brass drain plug shlall be provided from pump motor to three panel fitted on the cooler body.Cord : Flexible cord PVC Shethed and Insulated size 40/0.25 mm (1.5 Sqmm) 3 core (as per IS 694/1977) length 5 Mtr long with three pin 5 Amp ISI marked Bakelite plug Top shall be provided for power supply to cooler.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
46.
Housing Urban and Rular Development #10796259 AOC
Supply, Installation And Maintenance Of Mechanical Compactors, Storage Systems, Furniture Articles, Solid Teak Wood Benches For Public Seating In New Judicial Complex Tower Of Justice At Gurugram-Overall Size Of Personal Locker Unit Shall Be Of Dimensions 900Mm(W) X 400Mm(D) X 1850Mm(H) Having 15 Locker Unit. Locking Shall Have Pad Lock . Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Powder Coating Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. , Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1320Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways And 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (5 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (4 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (5 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915 Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 915 Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (3 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (4 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (5 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated.Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (4 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (2 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (3 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (5 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Supplying 2 Seater Visitor Chair With 3 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 3.82Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1100 ±10 Mm. Total Weight = 36.8 Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 3 Seater Visitor Chair With 4 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 5.65Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1625 ±10 Mm. Total Weight = 55Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 4 Seater Visitor Chair With 5 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 7.56Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 2175 ±10 Mm. Total Weight = 73.2Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01. Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 To Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. N , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 And Should Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, Overall Depth = 680±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1 Mm Thick And 535 Gsm And Breathable Mesh Tapestry Behind The Backrest.. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. A Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. For Seating Durability The Chair Shall Have Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Shall Have Five Legged Crca Chrome Plated Having Pitch Circle Dia. 640Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 490±10 Mm(W) X 520±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 535±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Chair Shall Be Supplied With Chrome Plated With Cushion Arm Having Leatherite Covering Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1040±10 Mm, Overall Depth = 620±10 Mm And Overall Width = 620±10 Mm. , Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort And Shall Have Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1Mm Thick, 535 Gsm And Breathable Mesh Tapestry Behind The Backrest. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm(W) X 510±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 540±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width = 560±10 Mm. N , Providing And Supplying A Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, , Providing And Supplying Centre Table With An Overall Size 1200Mm X 1200Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. . The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Kids Chair. The Complete Structure Shall Be Made Up Of One Piece Injection Moulded Polypropylene Shell. The Understructure Shall Consist Of Four Legs.There Is A Square Hole On The Backrest Of Size L 140 Mm X H 50 Mm For Air Flow.The Chair Is A Single Piece Unit Made From Virgin Grade Material. The Seat Size Shall Be 280±10 Mm(W) X 300±10 Mm(D) And Back Size Shall Be 310±10 Mm(W) X 330±10 Mm(H) From Seat And Overall Height = 610±10 Mm, Overall Depth = 420±10 Mm, Overall Width = 370±10 Mm.Seat Height = 330±10 Mm The Leg Dimension Is 47 Mm X 37 Mm, L Shaped. , Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Of Chrome Plated Frame Padded With Cushion With Leatherite Covering On Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Pipe Having Cross Section 40Mm X 20Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 500±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 490±10 Mm(W) X 550±10 Mm(H) From Seat And Overall Height = 960±10 Mm, Overall Width = 600±10 Mm And Overall Depth = 670±10 Mm. N , Providing, Placing And Installing A Slotted Angle Rack With An Overall Size 900Mm (W) X 600Mm (D) X 1800Mm (H). The Panel Shall Have 5 Nos. Of Shelves Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 2Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be Have Finishing With Powder Coating Of Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Corner Plate (Gussets) And Fasteners Shall Be Provided For Complete Assembly. , Providing, Supplying And Placing In Position An Indoor Chair Complete In All Respects Manufactured Using 20% Glass-Filled Injection Moulded Polypropylene, Ensuring High Strength, Durability, And Resistance To Wear And Tear. The Chair Shall Be Of Single-Piece Moulded Construction With A Smooth Finish And Free From Any Sharp Edges Or Defects. The Frame Structure Shall Be Supported By Four Sturdy Polypropylene Legs Of Tapered Design, Having A Diameter Of 35 Mm At The Upper End And 25 Mm At The Lower End, Providing Adequate Stability And Load-Bearing Capacity. The Seat Size Shall Be 420 ± 10 Mm (Depth) × 460 ± 10 Mm (Width), And The Back Size Shall Be 395 ± 10 Mm (Width) × 360 ± 10 Mm (Height From Seat Level), Ergonomically Designed For Comfortable Seating Posture. The Overall Height Of The Chair Shall Be 790 ± 10 Mm And Overall Depth Shall Be 515 ± 10 Mm. The Chair Shall Have A Uniform Finish, Be Uv Stabilized, And Suitable For Long-Term Use. Colour Shall Be As Approved By The Department/Engineer-In-Charge. The Rate Shall Include Supplying, Transporting, And Placing The Chair At Site In Complete Condition. Sample Shall Be Submitted For Prior Approval Before Bulk Supply. , Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf And Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing A Modular Table With An Overall Size 1350Mm X 900Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Crca Powder Coated Rectangle Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.2Mm Thick. The Table Understructure Shall Be Supplied With Ms Powder Coated Round Leg Pipe 63 X 1.2Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Fixed Pedestal Unit Shall Be Supplied With 1 Nos. Of Drawer Plus 1 Filing At One Side. Facia Of Drawer And Filling In 18Mm Plpb Board The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Aluminium Recessed Handle. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing Cafeteria Table With An Overall Size 1400Mm X 900Mm X 720Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Rectangle Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm With 1.6Mm Thick. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Center Table With An Overall Size 1200Mm X 1200Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia.The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia. The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Square Shape And The Edges Shall Be In Chamfer Shape. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 270Mm X 390Mm With The Assistance Of 9 Nos. Small Round Strips Having 5Mm Dia. And 370Mm Length. The Under Structure Shall Have Ss With Shiny Chrome Finish Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 750Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 45Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate And Finish As Per Shade Approved By Engineer-In-Charge. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Extruded Aluminium Profile Shall Be Attached On The Both Side Front And Back Side Of The Gable Ends And Bottom Side Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board Of Height 600Mm In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 900Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Have The Size 2100Mm X 900Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. The Table Top Shall Be Supported By Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 1050Mm X 695Mm With 49Mm Thick And 100Mm X 695Mm With 18Mm Thick. The Gable End Shall Be Made Up Of Pre-Laminated Particle Board With Appropriate Pvc Edge Banding And Covered Both Side By Aluminium Section. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have An Overall Size 1400Mm X 400Mm With 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 7200Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Round Front And Back And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End.It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Full Round Post Form And Other Edges Sealed With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be In Between.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Ms Powder Coated Round Pipe Having 50Mm Dia With 1.6Mm Thickness And Over Particle Board Gable End Of 18Mm Thickness. The Table Understructure Shall Have 4 Nos. Of Legs. The Table Is Provided With 8Mm Thick Bottom Plate And 5 Mm Thick Top Plate. There Shall Be Gliders Provided At The Base To Avoid Scratches On The Floor. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Conference Table In Completely Knock Down Conditions With Per Seat Size 675Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be With Minifix Dowels, Pins And Ms Brackets. The Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In C Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380 , Supplying And Placing Corner Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Understructure Shall Consist Of Ss 202 Grade Pipe Frame With Shiny Chrome Finish With An Overall Size The Size 40Mm X 20Mm With 1.6Mm Thick. One Nos. Footstep Shall Be Provided Between The Frame With Same Size I.E. 40Mm X 20Mm. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Modular Table In Completely Knock Down Conditions With An Overall Size 1800Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1800Mm X 750Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 50Mm Thick On Edges, After 100Mm From Edges It Should Be 25Mm Thick. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Extruded Aluminium Profile Shall Be Inserted In The Side Edges Of The Table On Both Side. The Table Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.6Mm Thick. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 50Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 1 Nos. Of Adjustable Shelf And 2 Nos. Of Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge With Al Die Cast Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Nursery Classroom Table With An Overall Size 1400Mm X 300Mm X 550Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Curve Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated With 40Mm Dia. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Office Table In Completely Knock Down Conditions With An Overall Size 3000Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of Medium Density Fibre-Board With Veneer Laminate Of Shade As Per Engineer-In-Charge. The Top Panel Shall Be In Rectangle Shape With 79Mm Thick (75Mm Mdf Plus 4Mm Natural Veneer And Pu). Veneered Portion Of Work Surface Shall Be Finish With Pu Polish. The Edges Of The Table Shall Be Supplied With Solid Brass Bar Strips Having Cross-Section Area 25Mm X 5Mm All Around Worktop. The Top Panel Shall Be Supported On Ms/Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Top Shall Be Enclosed With Flapper Box On Both Sides For Electric Provision Duly Polished. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 63Mm Thick Made Up Of (59Mm Mdf Plus 4Mm Natural Veneer And Pu). The Table Shall Be Clad With 29Mm Thick (25Mm Mdf Plus 4Mm Natural Veneer And Pu) Modesty Panel Which Provide Structural Support For The Table. The Profile Of The Gable End And Modesty Panel Shall Be In Linear Shape With Appropriate Veneer Surface. There Shall Be Leveler Provided With Metal Insert At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Table Shall Be Supplied With Both Side Pedestal Unit With An Overall Size 600Mm X 920Mm X 590Mm. Top, Side, Back, Facia Shall Be Made Up Of 18Mm Thick Mdf Board With Approved Veneer Laminate. It Shall Have 3 Nos. Of Drawer Operated With The Assistance Of Soft Closed Ball Bearing Channel And Grooves Handle For Easy Griping. The Complete Structure Shall Be Supplied With Approved Veneer Laminate And Pu Polish Accordingly. The Table And Pedestal Have To Be Made In Such A Way That No Gap Should Be Seen In Between. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. , Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 915±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm.N , Supplying And Placing Storage Unit With An Overall Size 600Mm X 450Mm X 1800Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Four Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Front Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Storage Unit With An Overall Size 900Mm X 450Mm X 900Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380 And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Two Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Fornt Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Wooden Bench 2.191 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.2 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respect , Wooden Bench 2.242 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.282 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.494 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.57 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.703 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.022 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.024 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.025 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.1 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.182 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.192 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.34 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.386 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.5 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.559 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.58 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.621 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.7 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.895 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.922 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.929 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects.
Contract Date: May 11, 2026 Contract Value : 17.47 Crore
Government Departments No of Bidders 5
47.
Defence #10793129 Price Bid
Tender For Additional / Alternator Certain Offer Md Accommodation Under Age B/R I At Chandimandir; 1 Taking down chowkats or frame not exc. 1.5 Sqm with shutters, without taking off shutters from the frame,complete all as specified and directed. 2 Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame,complete all as specified and directed. 3 Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. 4 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 5 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge 6 35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge. 7 35mm thick second class hard wood glazed and Skeleton shutteropen rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc.; Size of members of shutters as specified in SSR Part 1, Section 8, clause8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 8 150 mm size aluminium anodized, barrel tower bolt (ISI Marked) of extruded section complete all as specified and directed. 9 Aluminum alloy, anodized, sliding door bolt 2500mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. 10 Butt hinges 100mm long, of extruded aluminium alloy with galvanised mild steel hinge pin, complete all as directed. 11 150mm size aluminium handle (ISI Marked), cast type, anodised,complete all as specified & directed by Engineer-in-charge. 12 Dismantling boarding, any type and any description, fixed any position with nails all as specified and directed. 13 18mm thick HDHMR Board of uniform density not less than 850 kg/m3, both faces of HDHMR board shall be prelaminated as per approved design, fixed as in cupboard shutters complete all as specified and directed by Engineer-in-charge. 14 PVC body magnetic shutter catcher for kitchen cup boards cabinets etc, complete all as specified and directed. 15 Continuous (piano) hinges, mild steel bright finish, width of flap when open30mm, complete all as specified and directed. 16 1.5mm thick scratch proof high gloss Acrylic sheet, to be pasted on front shutters of HDHMR board, complete all as specified and directed by Engineer-in-charge. 17 20mm wide & 1mm thick PVC edge beading of PVC pasted on edges with suitable adhesive, complete all as specified and directed. 18 Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both end for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. 19 Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. 20 Wall / sink mixer for mixing hot & cold water, chromium plated suitable, and screwed down for 15mm bore GI pipe or union, fixed as in repaircomplete all as specified and directed. 21 WHB mixer, for mixing hot or cold water, screwed down for pipe and fixed, suitable for 15mm bore pipe fixed as in repaircomplete all as specified and directed. 22 Harrison rails 25 mm size, mild steel, chromium plated with fixing brackets, stops, rollers etc. for curtain rod inclulding taking down defective bracket complete all as specified and as directed. 23 Towel rail 600mm long ofmild steel, chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats, fixed as in repair complete all as specified and directed. 24 Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repaircomplete all as specified and directed 25 Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed. 26 PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. 27 Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repairs complete all as specified and directed. 28 Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 940 x 460 x 203mm, bowl size 405x354x203mm incl fixing of cantilever brackets to wall with making hole complete in cement mortar 1:2 and connection to union, pipe, fixed as in repair complete all as specified and directed. 29 Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed. 30 Single piece EWC (one piece), minimum size 715 x 335 x 715mm, , snow white colour, S-trap with integraed flusing cistern, including slim soft close seat cover , fixed as in repairs, complete all as specified and directed. 31 Precast concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade,laid over and including 25mm thick sand cushioning,well ramming complete all as specified and directed 32 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. 33 Demolition of brick masonry, built in cement mortar including all quoins arches, pillars etc completeall as specified & directed 34 Brick work using old size sub class B bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:4, complete all as specified and directed. 35 15mm thick rendering in Cement and Sand mortar 1:4 over brick , concrete surfacesfinished fair and even without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. 36 Applying Two or more coats on new plastered surfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paintof required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. 37 Two coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed. 38 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premises, complete all as specified and directed. 39 Non skid ceramic coloured tiles7 to 8 mm thick, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. 40 Glazed coloured ceramic tiles in vertical surface 450mm x 350 x7mm thick, set and jointed in neat cement slurry over 10mm thick thick rendering in cement mortar 1:4, for receving the tiles,complete all as specified and directed. 41 Coloured vitrified ceramic tiles, light shade,10mm thick (square / rectangular) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 42 All as per serial item 41but as in skirting/ daddo including,over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. 43 15-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and likein cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofgranite over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed. 44 Granite stone slabs, 16 to 18mm thick,width and length as per site requirement, best qualitymachine cut andpolished to be fixed infloors,cooking platform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edgesand corners where required with and including 15 mm thick screed bed in cement mortar 1:4, Complete all as specified and directed. 45 Dismantling plain or corrugated steel sheeting, AC sheetany gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge. 46 Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 47 Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified & directed by Engineer-in-Charge 48 Rolled sections as in main and cross beams, hip and jack rafters,purlins where connectedto common rafters and running rails and guidesforsliding doors, fixedwithangle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed. 49 Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. 50 PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints fixed to wall/floor including taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, fixed as in repaircomplete all specified and directed. 51 110mm bore PVC (SWR) bends any radius, complete all as specified and directed 52 Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators/ partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. 53 Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge 54 Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) ofapproved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. 55 4.80mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels not exc 0.5 Sqm in each pane, complete all as specified & directed. 56 4.80mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels exc 0.5 Sqm in each pane, complete all as specified & directed. 57 Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staplescomplete all as specified & directed. 58 Food grade stainless steel wire in any baskets of a modular kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley , plain basket, bottle pull out etc), minimum loading capacity65 Kg, made by min 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc complete all as specified and directed by Engineer-in-charge.Note:1. Only weight of SS wire basket will be measured before fixing.2. Only Fixing of all Fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc are included and will be paid in separate items as supply only. 59 Supply only of soft auto closing hinges openable at 0 degree for kitchen cabinet shutters Make :Hettich/Ebco/ Prime 60 Supply only Ball bearing runners 45 mm soft closing Telescopic Channel (20 Inch) full extension load capacity 50 Kgs, Black powder coated, Make :Hettich/Ebco/ Prime 61 Metal profile section for each shutter in kitchen cabinets either below or above slab complete all as specified. 62 Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. 63 Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed. 64 Plain cement concrete type B-0, 1:2:4 using (2012.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. 65 Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0,all as specified and directed. 66 Powder coated GI Frame work grid Size of grid 605 x 605mm for ceiling comprising of Gl periMetre channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed 67 4mm thick Nonasbestos fibre cement building boardsfixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified. 68 Factory made 18mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one sideprelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent/ adhesive, complete all as specified and directed. 69 Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socketor power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete 70 Material and labour forpoint wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account.Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. 71 All as per serial item 70 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed 72 Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. 73 Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. 74 Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. 75 Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. 76 Decorative wall light 12 watt LED indoor type antique design, synthetic type material, perfect ambience for living . Bedroom suitable for all type of lamp complete all as specified and directed. 77 LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,includinglamp bracket upto 1.5metre length as per suitable for fitting including clamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, including taking down old street lght complete all as specified and directed. 78 Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mmand provision of flexible copper cable 3 core from ceiling rose to exhaust fan complete all as specified and directed. 79 Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge. 80 Taking down carefully Geysers of any capacity and removing with materials to store for keeping in safe custody by the contractor and deposit to the MES store yard, check its serviceability and futher action, complete all as specified & directed 81 Fixing only seviceable Geysers of any capacity and connecting up with existing site as sper direction compelte received from MES store yard complete all as specified and directed. 82 Electric water heater(vertical type geyser), capacity 25 litre, 2 KW BEE 5 Star rated AC single phase, including MS glass lined inner tank, glass coated heating element, high density PUF insulation, Anode rod protection, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolts with all accessories such as safety valve, thermostat, NRV, connection piece etc. making necessary inlet / outlet water connection, testing on load including connection with 3 core PVC insulated, sheathed, stranded copper conductor cable / flexible shord with plug complete all as specified and directed. 83 Electric auto clean glass chimney (ISI Marked) with invertor technology, suction capacity 1400-1500m3/h, Filterless tech 6062 BLDC AC 9 speeds control brushless powerful DC motor, Touch controls with motion sensor, wave and start, stainless steel body black colour with LED light including flexibly adjustableto lenght PVC pipe 150mm for fixing in wall inside and outside for exhaust cooking air through chimney with louvers complete all as specified and directed. Make as approved by GE
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
49.
Railways #10755501 AOC
Tender For Procurement (Complete Design, Supply ,Installation & Commissioning On Turnkey Basis) Of Pit Less Electronic In Motion Railway Weighbridges (Eimwb) -07 Setprocurement (Complete Design, Supply ,Installation & Commissioning On Turnkey Basis) Of Pit Less Electronic In Motion Railway Weighbridges (Eimwb) -07 Set,Cost Of The Basic Machine , Installation Commissioning And Erection Charges [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set 3 6525Ns02 Concomitant Non Stock --- Yes Tpi Agency Inr (G01) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse(C&W)Bndm, Ser Odisha 3.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns03 Essential Non Stock --- Yes Tpi Agency Inr (G01) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse(C&W)Bndm, Ser Odisha 3.00 Set Inspection Stage Inspection Not Required Details Page 1 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 5 6525Ns04 Essential Non Stock --- Yes Consignee Inr (G01) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set 6 6525Ns05 Essential Non Stock --- Yes Consignee Inr (G01) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set Group G02-Dps 1 6525Ns08 Basic Non Stock --- Yes Tpi Agency Inr (G02) Machine (Y) Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: In Details Process Inspeciton (100% Of Po Qty ) 2 6525Ns12 Amc (Y) Non Stock --- Yes Consignee Inr (G02) Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set 6 6525Ns05 Essential Non Stock --- Yes Consignee Inr (G01) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set Group G02-Dps 1 6525Ns08 Basic Non Stock --- Yes Tpi Agency Inr (G02) Machine (Y) Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: In Details Process Inspeciton (100% Of Po Qty ) 2 6525Ns12 Amc (Y) Non Stock --- Yes Consignee Inr (G02) Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set Group G02-Dps 1 6525Ns08 Basic Non Stock --- Yes Tpi Agency Inr (G02) Machine (Y) Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: In Details Process Inspeciton (100% Of Po Qty ) 2 6525Ns12 Amc (Y) Non Stock --- Yes Consignee Inr (G02) Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] , Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document , Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3.
Contract Date: Apr 11, 2026 Contract Value : 1.93 Crore
Government Departments No of Bidders 1
50.
Heavy Industries and Public Enterprises #10706525 Price Bid
Tender For Selection Of An Event Management Agency ( Ema ) For Inauguration Of India International Convention Centre ( Iicc ) , Dwarka, New Delhi; 1 Havan At Foyer Area 2 Havan Kund, Havan Samagri And Pandit For Havan Rituals 3 Centre Thematic Setup Of Size 10M X 10M For Havan Rituals 4 Wooden Chairs 5 Cocktail Tables For Hi-Tea Arrangements 6 Buffet Counters With Frill For Hi-Tea Arrangement 7 Q Managers 8 Floral Decoration At Foyer Area ( High Quality Fresh Flowers ( Cosmos Flower, Gaillardia Flower, Zinnia Flower, Dahlias Flower, Peonies Flower, Fox Brush Orchids Flower, Tulips Flower, Gloriosa Lily Flower, Pineapple Lily Flower, Rain Lily Flower, Flower, Roses- Different Colour, Carnations Flower, Birds Of Paradise ) . Theme Of Floral Decoration To Be Presented In Technical Presentation. 9 2.6Mm Led Screens Of Size 16 X 12 For The Various Locations With Sound Facility 10 Riser Of Size 12 X 4 X 26 With Branding And Side Black Masking For Led 11 Sound System Of Havan Rituals For 200 Pax With Mics 12 Digital Photographers For Havan 13 Digital Videographers For Havan 14 Genset For Other Leds And Other Requirements, Including Distribution 50 Kva Along With Diesel 15 Hi-Tea Arrangements, Including Tea / Coffee, Snacks, Etc. From A Reputed 5-Star Hotel 16 Main Event Area / Auditorium 17 2.6Mm Led Wall Of Size 100 Ft X 35 Ft For Stage Backdrop 18 Led Riser: 100 X 4 X 6 Inches High With Ply On Top, Carpet , Setup In The Main Auditorium. 19 Scaffolding Structure For Led Support 100 X 24 20 Flower Decoration On Stage. 21 Thematic Wall Of Size 20 Ft X 35 X 2 Numbers On Both Side Of Led Wall, Including Necessary Scaffolding 22 Hiring Of Show Running Team And Technical Team- Show Running Of The Entire Unveiling And Launch Ceremony Including Technical Coordination And On-Stage Flow 23 Additional Lights For Foh - Moving Heads 32, Wash - 24, Rgb Led -24 24 Techrider For Culture Artist And Other Artists 25 Sofa Seat ( High-End ) Mix Of 1, 2-, 3- And 5-Seater Sofas 26 Mozo Barricading / Fencing 27 High Platform For Media, Console And Camera Etc. 28 Mozo Barricading In Front Of Stage In D Shape For Hon’Ble Pm 29 Lightening Of Lamp By Vip 30 Q Manager 31 Genset For Main Stage Led, Including Distribution 32 ( 250 Kva+125 Kva Genset 375 Kva With Dieselups For Main Stage Led 375Kva 33 F&B Area 34 Buffet Counters With Masking & Frill 5Rft 35 5 Round Tables With 8 Banquet Chairs With High-Quality Linen 36 Cocktail Tables 37 Flower Decoration In Both Food Courts 38 Glass Water Bottles - Minimum 200 Ml 39 Hi-Tea Arrangements, Including Tea / Coffee, Snacks, Etc. From A Reputed 5 Star Hotel 40 Media Lounge 41 Media Lounge To Be Constructed In Hangar With Air- Conditioning, Platform, New Carpet, Lighting, Electrical Outlets, The Lounges To Have Acoustic Walls, Ceiling, Pantry With Serving Facility And Storeroom 42 Power Back-Up Dg For Media Lounge With Diesel 300Kva 43 Vip Toilets For Media Lounge 44 Facility For Live Telecast Of The Inaugural, Valedictory And Sectoral 45 Sessions In The Media Lounges. 46 Workstation With Seating Arrangements, Electric Sockets 47 Sofa Seating ( 2+1+1-Seater ) 48 Centre Tables 49 Chair For Round Table Sitting 50 Round Tables 51 Pigeonhole Rack 52 Laptop / Mobile Charging Stations 53 Computers For Media Workstations With B / W , Color A4 Size Printers 54 Stationary For Media Lounge 55 Decoration 56 Florals In Different Area ( High Quality Fresh Flowers ( Cosmos Flower, Gaillardia Flower, Zinnia Flower, Dahlias Flower, Peonies Flower, Fox Brush Orchids Flower, Tulips Flower, Gloriosa Lily Flower, Pineapple Lily Flower, Rain Lily Flower, Flower, Roses- Different Colour, Carnations Flower, Birds Of Paradise ) . 57 Logo Theme Flags 58 Appropriate Landscaping With Plants Across The Event Venue, Ensuringoverall Ambience Decor. 59 Gallery Showcasing Neo Bharat Theme 60 Setting Up For A Special Thematic Showcase / Gallery Area For Vip Walkthrough, Depicting Journey Of Iicc And India Milestones. Displays To Include 3D Cutouts, Printed Panels, Av Screens, Plasma Screens, And Tech Engagements Arranged In Aesthetic Manner. Theme Should Be Revolving Around Neo Bharat. 61 Carpeting In Open Area / Foyer Area 62 Coir Carpeting ( New ) And Maintenance Of The Carpet To Be Done. Red Carpeting ( New ) In Pathways / Approach Routes Taken By Vvip , VipS Within Convention Centre And Outside The Venue, Inside Dmrc 15000 Sqft 63 Thematic Gate 64 Main Thematic Gate Of Length 60- 80 Ft And Height 30-40 Ft. The Gate Should Be Made Using Different Material Like Wood, Pop, Fibre, Raisins, Brandings, Flex, Acrylic, And Outer Cut Letterings, High Quality Paint And Material Finishes, Metal Works Depicting The Theme Proposed. 65 Small Gates Depicting The Theme Of Length 20-30 Ft And Height 12-16 Ft. The Gate Should Be Made Using Different Material Like Wood, Pop, Fibre, Raisins, Brandings, Flex, Acrylic, And Outer Cut Letterings, High Quality Paint And Material Finishes, Metal Works Depicting The Theme Proposed. 66 Emergency / Miscellaneous Services 67 Control Room For Fire, Disaster Management Etc. In Form Of A Hangar And General Lighting For Officers For Various Services. 68 Medical Hangar With Air- Conditioning, Platform, New Carpet, Lighting, Electrical Outlets, Acoustic Walls, Storeroom, And Toilet Facility. Provision For Partition For Patient Rooms ( 10 Nos. ) , Seating Arrangement ( 05 Tables, 20 Chairs ) For Medical, Support Staff And Reception Area. 69 Power Back-Up Dg For Control Room And Medical Hangar 50 Kva With Diesel 70 Event Branded Pagodas ( 3X3 Sqm ) For Various Purposes Consisting Of Two Tables And Four Chairs Including Platform, Carpet, Dustbin, And Electrical Points. 71 Branding 72 Buntings, Banners, Scrollers, Etc. Of Appropriate Sizes At Various Locations At The Venue, As Well As Throughout The Prominent Places Of New Delhi Using Appropriate Eco-Solvent Printing Materials, Hoardings, Key Locations Shall Be Updated By Ema 73 Digital Signages For The Different Areas 74 Flex Iron Mounted Of Different Sizes In The Venue, Outside Venue And Within Dmrc Route Using Appropriate Eco-Solvent Printing Materials 50 Nos 75 Logo Of Iicc Needs To Be Installed At Various Locations Inside The Venue Of Various Sizes, Using Different Material Like Wood, Pop, Fibre, Acrylic, And Outer Cut Letterings, High Quality Paint And Material Finishes, Metal Works Etc Of Different Sizes. 8X4 , 12X08, 20X12. 76 General Lighting 77 For The Entire Event Venue On Light Poles, Each Light Pole Having Of 150 Watts Metal Halide / Led Light / Rgb Light Rates Will Be Inclusive Of Wiring From The Source To Consumption Point Through Underground Cabling. 78 Collaterals 79 Invitation Design & Cards Printing With Qr Code 80 Car Stickers 81 Shuttle Stickers 82 Badges 2 Sided Printed With Punch Hole On 2 Sides & Lanyards For Organizers, Delegates, Artisans. 83 Badges & Lanyards For Volunteers / Working Team 84 Golf Carts 85 6-Seater Golf Cart With Driver And Charging Facility. 86 Shuttle Buses Electric Or Cng , 20 Seater Or Above 87 Innova Crysta Cars 88 Parking Area & Management 89 Parking Area To Be Created For 2000 Cars In The Designated Zones Per Site Layout With Proper Markings, Signages, Control Booth, Tin Barricading, Lighting, And Manpower To Control The Traffic Movement. 90 Event Branded Gate ( 24 Ft. X 18 Ft. ) For Different Parking Areas 91 Pa System For Announcements In Parking Area 92 Manpower 93 Emcee Who Would Be Proficient In Hindi And English, Artist Management, Logistics And Etc. 94 Visitor Management Including Hostesses, Volunteers, Helpers, Stage Coordinators, Hospitality Managers, Etc. Provide Uniformed And Well-Dressed Ushers On The Days Of The Event. 95 Photography & Videography 96 Complete Photography Setup ( 3 Nos ) , Videography Setup ( 5 Nos ) Using High End Cameras With Hd Live Mixing Unit, 36 Out Audio Video Di Box 97 Live Streaming Of The Entire Event, Live Relay Across All The Areas With Provision For Live Feed. 98 Multi Camera Videography With Zip Crane 99 Digital Photographers 100 Digital Videographers 101 Security Arrangements 102 Supplying, Installation And Maintenance Of Door Frame Metal Detector Machines For Entry Points, For The Entire Event Duration At The Venue, As Approved By The Security Management Plan, 103 Supplying, Installation And Maintenance Of Handheld Metal Detector Machines With Adequate Manpower For Entry Points, For The Entire Event Duration At The Venue, As Approved By The Security Management Plan. 104 Supplying, Installation And Maintenance Of Walky-Talky For The Entire Team, For The Entire Event Duration At The Venue, As Approved By The Security Management Plan. 105 Supplying, Installation And Maintenance Of Baggage, Thermal Scanners Scanning Machines With Adequate Manpower For Entry Points, For The Entire Event Duration At The Venue, As Approved By The Security Management Plan. 106 Frisking Booth For Females With Curtains 107 Complete Coverage Of Venue With Moveable And Zoomable Cctv Cameras With Monitoring Setup. 108 Human Resource Deployment 109 Security Personnel With Uniform For 24X7 Surveillance Male & Female 110 Housekeeping Team 111 Sanitization And Pest Control Of The Complete Convention Centre & Foyer Area , 3 Times In A Day, 3 Days Before The Event 112 Toilets 113 Bio-Chemical Toilet ( Male & Female ) 114 Safe Room 115 Safe Room For Vvip Around The Stage At Inaugural Hall Which Would Include Sofas, Chairs, Teapoy Tables, Flower Decoration, Water Bottles, Platform, Carpeting. ( 100 Sqm ) 116 Installations 117 Installations ( 490 Sqft ) To Serve As A Photo Opportunity; Well- Integrated On The Theme Of The Event And To Be Erected At The Most Suited Location At The Event Venue, For Maximum Engagement, Locations Needs To Be Mentioned In The Presentation 118 Miscellaneous 119 Wheelchair 120 Stone Plaque 121 Sitting Arrangement For All The Halls ( Carnation, Laburnum, Meeting Rooms At 3Rd Floor Aster Hall, Petunia Hall, Tulip Hall, Zinnia Hall, Daffodil Hall, Vvip Lounge, Furniture Lobby Area Furniture, Auditorium Area Furniture, Green Room & Artist Room Furniture, Etc ) - 2000 Pax 122 Green Room 123 Mirror In The Room For Artists 124 Table 125 Chairs 126 Cloth Hangars 127 Social Media Publicity 128 1 Content Development As Required By The Authority 2. Creation Of Event Specific Pages / Handles On Social Media3. Developing Social Media Strategy In Accordance With The Approved Branding And Publicity Plan 129 Vc Av Requirement For HonBle Pm 130 Hardware ( H.323 / Sip ) Videoconferencing System Configuration. Make: Videoconferencing Equipment Like Cisco / Poly / Panasonic Or Equivalents 131 Dedicated Lease Line Of 100 Mbps With 100 Mbps Dedicated Backup With A Different Isp Provider 132 Suitable Interface Converters To Connect Camera With Videoconferencing Systems Through Hdmi Input Supporting 1080P60 / 1080P30 133 Multiple Professional Full Hd Video Cameras With Live Mixing Setup 134 Photographers 135 Live Mixing Setup 136 Console Setup, Including Tables, Chairs, Black Masking 137 Stone Plaque => Limited
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
TenderDetail
Loading tenders