View Bid Results For Power Quality Audit Tenders

We found 47 Bid Results related to power quality audit tenders. You can find Contractor details who won power quality audit tenders along with contract details in Bid awards announcements section.

Indian Tenders
5
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
33
7
7
Tender Publishing Platform
4
43
State / UT
17
9
7
4
4
4
3
2
2
2
2
2
1
1
1
1
1
1
Contract Value
22
11
9
4
Publish Date
0
0
0
0
0
Sector
10
13
10
9
4
4
2
2
1
1
1
Ownership
4
19
16
8
4
Within keyword
Active filters:
Showing 1–1 of 47 tenders matching your filters
Telangana View Result →
2.
Railways #10755501 AOC
Tender For Procurement (Complete Design, Supply ,Installation & Commissioning On Turnkey Basis) Of Pit Less Electronic In Motion Railway Weighbridges (Eimwb) -07 Setprocurement (Complete Design, Supply ,Installation & Commissioning On Turnkey Basis) Of Pit Less Electronic In Motion Railway Weighbridges (Eimwb) -07 Set,Cost Of The Basic Machine , Installation Commissioning And Erection Charges [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set 3 6525Ns02 Concomitant Non Stock --- Yes Tpi Agency Inr (G01) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse(C&W)Bndm, Ser Odisha 3.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns03 Essential Non Stock --- Yes Tpi Agency Inr (G01) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse(C&W)Bndm, Ser Odisha 3.00 Set Inspection Stage Inspection Not Required Details Page 1 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 5 6525Ns04 Essential Non Stock --- Yes Consignee Inr (G01) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set 6 6525Ns05 Essential Non Stock --- Yes Consignee Inr (G01) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set Group G02-Dps 1 6525Ns08 Basic Non Stock --- Yes Tpi Agency Inr (G02) Machine (Y) Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: In Details Process Inspeciton (100% Of Po Qty ) 2 6525Ns12 Amc (Y) Non Stock --- Yes Consignee Inr (G02) Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set 6 6525Ns05 Essential Non Stock --- Yes Consignee Inr (G01) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set Group G02-Dps 1 6525Ns08 Basic Non Stock --- Yes Tpi Agency Inr (G02) Machine (Y) Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: In Details Process Inspeciton (100% Of Po Qty ) 2 6525Ns12 Amc (Y) Non Stock --- Yes Consignee Inr (G02) Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse(C&W)Bndm, Ser Odisha 3.00 Set Group G02-Dps 1 6525Ns08 Basic Non Stock --- Yes Tpi Agency Inr (G02) Machine (Y) Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: In Details Process Inspeciton (100% Of Po Qty ) 2 6525Ns12 Amc (Y) Non Stock --- Yes Consignee Inr (G02) Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of The Basic Machine , Installation Commissioning And Erection Charges ] , Cost Of Comprehensive Type Camc For Ten Years Post Warranty(I.E. Total Sum Of Schedule A & B) [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3 6525Ns07 Concomitant Non Stock --- Yes Tpi Agency Inr (G02) Accessories (Y) Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 4 6525Ns09 Essential Non Stock --- Yes Tpi Agency Inr (G02) Spares (Y) Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/C&W/Dps, Ser Jharkhand 4.00 Set Inspection Stage Inspection Not Required Details 5 6525Ns10 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 For All Items Completion : Within 300 Days 1) Delivery Schedule As Per Clause 9 Annexure 1 Attached 2) Delivery Location - As Per Clause 8 Of Annexure 1 Attached. Payment Terms S.No Description Payment Terms 1 Payment Terms - As Per Clause 12 Of Annexure 1 Attached. Wbg- To Be Submitted As Per Clause 10 Of Annexure 1 Attached. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Plus 30% Option Clause Applicable As Per Clause 24.0 Of Instructions To Tenderers And General Conditions Of Tender For Supply Contract Of South Eastern Railway. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 As Per Rdso Letter No : Mw/Cs/Pewb Normal Applicable To Yes Yes Allowed Dated 11.11.25 Or Latest. Vendor Should All Bidders (Mandatory) Be Approved By Rdso For Manufacturing And Supply Of Pit Less Electronic In Motion Weighbridge(15Kmph). The ϬRm Should Upload The Vendor Approval Copy And Valid Quality Audit Certiï¬Cates Along With Its OffErs, Else The OffEr Submitted Shall Be Summarily Rejected. 2 Preference To Make In India Policy: Normal Applicable To No No Not Allowed Procurement Of The Item Is Restricted To All Bidders Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. Requirement Of A Vendor To Be A Class I Local Supplier For This Item, Shall Be A Mandatory Condition In Addition To Other Qualifying/ Eligibility Criteria/Conditions. Page 3 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 3 Authorised Dealers / Agents Of The Normal Applicable To Yes Yes Allowed Approved Vendors / Oem Must Submit All Bidders (Mandatory) Tender Speciï¬C Authorization Letter From Rdso Approved Manufacturers Of The Item , Failing Which Their OffEr Will Be Summarily Rejected 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached The Price Break Up Of Normal Applicable To No No Not Allowed Concomitants Accessories, Optional All Bidders Accessories, Consumables And Essential Spares In Pdf ϬLe Through Attach Document Template Or Otherwise? 2 Have You Quoted Price Of Basic Normal Applicable To No No Not Allowed Machine, Concomitant Accessories, All Bidders Essential Spares, Consumables, Essential Services, Amc And Other Items As Per The Requirement. It Is Mandatory To Submit Offers Against All These Items Otherwise The Bid Shall Not Be Considered In Ranking 3 Have You Quoted For Optional Normal Applicable To No No Not Allowed Accessories,Spares,Amc Etc, If All Bidders Applicable And As Per The Requirement Mentioned In Annexure 1 ? 4 Have You Quoted Warranty Obligations Normal Applicable To No No Not Allowed As Per Clause 16 Of Annexure 1 ? All Bidders 5 Have You Quoted Delivery Period Normal Applicable To No No Not Allowed Correctly And Precisely As Per Sr No 7 All Bidders Of Section Iv Of Annexure 1 Attached? 6 Have You Quoted For Any Other Items Normal Applicable To No No Not Allowed Considered Essential By You For The All Bidders Operation Of The Machine To Meet The Purpose And Capability Specified In Technical Speciï¬Cation.[Under Essential Spares] 7 Have You Submitted Other Supporting Normal Applicable To No No Not Allowed Documents To Establish Your Eligibility ? All Bidders 8 Commercial Details And Performance Normal Applicable To No No Not Allowed Appraisal Form (Annexure E Of Section Vi All Bidders Of Annexure 1 9 Details Related To Compliance Of Normal Applicable To No No Not Allowed Reference Clause Mentioned In Special All Bidders Conditions Of Tender. 10 Have You Attached The Past Normal Applicable To No No Not Allowed Performance Credentials With Your All Bidders Offer? Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 Bidder Are Reminded To Carefully Go Normal Applicable To Yes Yes Allowed Through Irs Conditions Of Contract All Bidders (Optional) (Included And Uploaded Along With The Bid Document) Particularly Those Pertaining To Code Of Integrity,Misdemeanor And Penal Measures. If Two Or More Bidders Are Found To Be Sister Concerns Or Aï¬Ƒliates (Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control, Etc.) The OffErs Of All Such Sister Concerns Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Condition. 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Tender Document Consists Of Normal Applicable To No No Not Allowed Annexure 1, Gcc ,Nit And Conditions All Bidders Mentioned In This Document. Tenderers To Ensure Compliance Of Conditions Mentioned In These Documents. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1. Inspection By Tpi(Third Party Normal Applicable To No No Not Allowed Inspection). All Bidders 2. There Will Be 02 Stages Of Inspection (Excluding ϬNal Lot Inspection) As Per Speciï¬Cation And Approved Qap As Follows: First Stage - Raw Material Inspection. Second Stage - In Process Inspection. Final Product Inspection At Firms Premises. 2 Firm To Mention Hsn Code & Gstin No. Normal Applicable To Yes Yes Allowed Of The Tendered Item All Bidders (Optional) 3 Emd And Sd Clause Will Be Normal Applicable To Yes Yes Not Allowed Applicable As Per Clause No.5.0 All Bidders And 6.0 Of Gcc Attached Page 5 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 4 Sharing Of Land Border With India Normal Applicable To Yes Yes Allowed Clause: Bidders Are Requested To Go All Bidders (Optional) Through Clause No. 32.0 (32.1 To 32.6) Of Ser Instruction To Tenderers And General Conditions. Bidders Should Conï¬Rm Following Certiï¬Cate For Compliance. (A) I Have Read The Clause Sr. No. 32 Of Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Attached With The Tender Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India Or Bidder Who Has A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With An Entity From A Country Which Shares A Land Border With India And On Sub- Contracting To Contractors From Such Countries. (B) I Certify That This Bidder Is Neither From Such A Country Nor Have A Speciï¬Ed Transfer Of Technology (T.O.T) Arrangement With Such An Entity From A Country Which Shares A Land Border With India And Will Not Sub-Contract Any Work To A Contractor From Such Countries Unless Such Contractor Is Registered With The Competent Authority. I Also Certify That This Bidder Will Not OffEr Any Products/Services Of Entity From Such Countries Unless Such Entity Is Registered With The Competent Authority. (C) I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. (D) I Hereby Acknowledge That In The Event Of Acceptance Of My Bid On Above Certiï¬Cate And If The Certiï¬Cate Is Found To Be False At Any Stage, The False Certiï¬Cate Would Be A Ground For Immediate Termination Of Contract And Further Legal Action In Accordance With The Law. (Bidders Conï¬Rming This Certiï¬Cate For Compliance Shall Select Yes In The Complied Column. However, In Case You Do Not Conï¬Rm Above Certiï¬Cate For Compliance, Select No In Complied Column. In Such Cases You Are Required To Submit The Certiï¬Cate For Compliance As Per Annexure-8 Instructions To Tenderers And General Conditions Of Tenders For Supply Contract Along-With Their Bid/Offer.) 5 I) There Will Be A Pre-Bid Meeting For Normal Applicable To No No Not Allowed This Tender As Per Speciï¬Ed Date And All Bidders Time. Ii)Venue Of Pre Bid Meeting : Meeting Room Of Pr. Chief Materials Manager (Pcmm) Oï¬Ƒce , 5Th Floor Nab, 11 Garden Reach Road, Kolkata 700043 . 6 Warranty Period: 24 Months After Normal Applicable To No No Not Allowed Date Of Commissioning. All Bidders 7 Any Responsibility Of Cofmow Normal Applicable To No No Not Allowed Mentioned In The Annexure 1, Shall Be All Bidders Of South Eastern Railways. 8 Split Clause Will Be Applicable As Para Normal Applicable To No No Not Allowed 25.0 Of Ser Instruction To Tenderers & All Bidders General Conditions Of Tender Enclosed. The Purchaser Intends To Split The Order Quantity Between Two Or More Firms. Special Conditions Page 6 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges 2 In Case Of Any Mismatch In Conditions Normal Applicable To No No Not Allowed Mentioned In Speciï¬Cation Attached As All Bidders Annexure 1 And In General Conditions Of Contract Attached With Tender, Conditions Mentioned In Annexure 1 Will Supercede The Conditions Mentioned In General Conditions Of Contract. 3 The ϬRm Shall Arrange Calibration, Normal Applicable To No No Not Allowed Testing, Stamping, And Certiï¬Cation Of All Bidders The Weighbridge At Commissioning, During Warranty, And Camc As Per Terms. Any Failures Or Annual Calibration Expenses, Including Statutory Stamping Charges By The State, Shall Be Borne By The Firm 4 If Railway Adopts Pre-Cast Foundation Normal Applicable To No No Not Allowed Technology Under The Weigh-Rail, The All Bidders Firm Shall Execute It Free Of Cost As Per Ser Drawing No. 622/2018 In The Tender Document 5 For Laying Pre-Cast Slabs, If Required, The Normal Applicable To No No Not Allowed Firm Shall Arrange For Road-Mobile Crane All Bidders 6 Railways Will Arrange For Power Supply Normal Applicable To No No Not Allowed To The Control Room Of The Eimwb All Bidders 7 The Railway Will Provide Psc Sleepers Normal Applicable To No No Not Allowed And Will Assist With The Cutting Of Rails All Bidders And The ϬXing Of Weigh-Rails As And When Required. 8 The Railway Will Provide The Necessary Normal Applicable To No No Not Allowed Traffic Block As Per The Firms Request All Bidders 9 The Machine Will Be Under Normal Applicable To No No Not Allowed Comprehensive Preventive Maintenance All Bidders During Warranty Period Of Two (02) Years And Amc For Ten (10) Years 10 Damage Due To Lightning Or Surge, Normal Applicable To No No Not Allowed Covered Under Amc, Will Be Repaired All Bidders Without Extra Cost To Railway. 11 The Eimwb Manufacturers Shall Be Normal Applicable To No No Not Allowed Required To Maintain Spare Part Hubs At All Bidders Strategic Locations ( Spare To Be Kept Within 100 Km Radius Of Installed Eimwb Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Annexure 1 All Bidders (Mandatory) Tenderers Are Required To Submit Complete Details Including Values, Write- Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Offer Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 Technical Specification As Per Normal Applicable To No No Not Allowed Annexure 1 All Bidders Page 7 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I/We Agree To Supply The Tendered Normal Applicable To No No Not Allowed Stores At The Rates Quoted By Me/Us In All Bidders Accordance With The Conditions Mentioned In Annexure 1, Gcc , Nit And Conditions Mentioned In This Document. 2 I/We Also Conï¬Rm That Rates And Other Normal Applicable To No No Not Allowed Financial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation. 3 Undertaking For Gst. Normal Applicable To No No Not Allowed We Hereby Declare That In Quoting The All Bidders Basic Price, We Have Taken Into Account The Full EffEct Of Input Tax Credit Available Under Gst. We, Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser Accordingly. We Also Undertake That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. We Shall ϬLe Their Gstr-1 And Gstr-3B For Transaction With Railways In Due Time Preferably Every Month So That Itc Benefit Can Be Availed By Railway 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To 3 The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In 8 The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After 9 The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description Page 8 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document Tender No 65255048 Closing Date/Time 23/01/2026 14:00 1 5637381.Pdf Foundation Drawing 2 5639851.Pdf Annexure 1 3 5637388.Pdf Irs Conditions 4 5637386.Pdf General Conditons Of Contract 7. Responsiveness S.No. Description Code Of Integrity Declaration: I/We Have Carefully Gone Through The Irs Conditions Of Contract(Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director /Promoter/Owner/Holding Company/Management Control Etc.) Have Participated In This Tender Which Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Related Concerns Including Ours Are Liable To Be Rejected As Per 1 Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General,With Speciï¬C Reference To ConflIct Of Interest [Para 2502(E)], Anti-Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected At Any Stage. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Et ( Shahid Malik ) Page 9 Of 9 Run Date/Time: 24/12/2025 16:34:04 , Cost Of Concomitant Accesorries As Per Tender Specification [ Warranty Perio D: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Which In The Opinion Of The Supplier Is Essentially Required For Making The Machine Fully Functional. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Charges Viz Foundation Room Installation & Commissioning Etc. ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 6 6525Ns11 Essential Non Stock --- Yes Consignee Inr (G02) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 2 Of 9 Run Date/Time: 24/12/2025 16:34:04Stores-Pcmm/South Eastern Rly Tender Document , Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/C&W/Dps, Ser Jharkhand 4.00 Set 3.
Contract Date: Apr 11, 2026 Contract Value : ₹ 1.93 Crore
Government Departments No of Bidders 1
Odisha View Result →
3.
Health and Family Welfare #10612599 Price Bid
Notice Inviting E Tender For Purchase Of Office Stationeries And Consumables At Baruipur Sdh South 24 Parganas-1.01 Absconded Form 7.5*8.5 Inch Single Side, 100 Leaf Pad, 70 Gsm 1.02 Atteendence Sheets Ledger Paper, 17*13.5 Inch, 75 Gsm 1.03 Autoclave Register Legal Paper, Back-To-Back, 70Gsm, 200 Page, With Numbering, 3 Mm Board Binding 1.04 A4 Paper Copy Power / Jk Red 75 Gsm 1.05 Alpin 50 Gm Container Good Quality 1.06 Admission Register A3, 100 Folio, 70 Gsm, , Back-To-Back, Numbering, 3 Mm Board Binding 1.07 Arch File 13*11 Inch Good Quality 1.08 Alpin Continer 3 Inch Height Good Quality 1.09 Anasthesia Form A3, Fornt Back, 70 Gsm 1.1 Art Register Legal, Fornt Back, 70 Gsm, Numbering, 3 Mm Board Binding 11 Anc Register Legal, Fornt Back, 70 Gsm, Numbering, 3 Mm Board Binding 12 Asha Register A4, Back-To-Back, 70 Gsm, Numbering, 3 Mm Board Binding 13 Bond Paper Jk Bond, 100 Gsm 14 Bht Adult Legal, Fornt Back, 70 Gsm, Pad Binding, 100 Sheet In A Pad 15 Bht Baby A4, Front Only, 70 Gsm, Pad Binding, 100 Sheet In A Pad 16 Blood Requisition Form Legal, 70 Gsm, Bi Colour, Fornt Back, Pad Binding, 100 Sheet In A Pad 17 Board Pin 50 Gm Box, Good Quality 18 Breush For Clean Gala 19 Battery Big 1050, Good Quality, Eveready, Red 20 Battery Medium Good Quality, Eveready, Red 21 Battery Pencil Aa, Eveready, Red 22 Battery Pencil Aaa, Eveready, Red 23 Brown Paper With Lamination, 17*27 Inch 24 Binder Clip 55 Mm, Good Quality 25 Binder Clip 32 Mm, Good Quality 26 Blood Bag Label 4.25*2.5 Inch, Colour, Gumming Label Good Quality, 04 Colour 27 Blood Centre Debit Voucher 9*5.5 Inch, 70 Gsm, In Duplicate, Numbering, Bill Binding, Colour Paper, 50*2 28 Blood Centre Vbd Refreshment Payment Voucher A4, Single Side, 70 Gsm, In Duplicate, Numbering, Pad Binding, 50*2 29 Cu T Form Legal, Both Side, 70 Gsm, Pad Binding 30 Cbg Battery Cr2032, 3V, Good Quality, Li Ion Battery 31 Digital Thermometer Battery Lr 41, Good Quality, Li Ion Battery 32 Curtain Fittings Shower Curtain, 10 Ft* 10 Ft, Good Quality 33 Cartridge Refilling / Drum Change 88A / 12A Toner Cartridge Refilling 34 Coconut Oil Paracut Blue, 100 Ml 35 Clip Board Legal Size, Fibre, Plain, Good Quality 36 Ct Scan Voucher 11*7.34 Inch, 70 Gsm, 100 Leaf Pad, Numbering, Perforation. 37 Concent Form A4, Front Print, 70 Gsm, 100 Leaf Pad. 38 Computerised Opd Tickets 80 Gsm, 10*12 Inch, Front Back, 39 Cross Match Issue Book A4, Duplicate, 50*2, 70 Gsm, Colour, Numbering, Book Binding 40 Carbon Paper Kores, 100 Sheets In Box, Legal 41 Calculator Orpat, Ot 400, 12 Digit 42 Cotton Thread 555, 6 Box Roll 43 Cover File Good Quality With Lamination 44 Cello Tape 50 Meter, Good Quality 45 Census Register A3, 100 Folio, 70 Gsm, White Paper, Back-To-Back, Numbering, 3 Mm Board Binding 46 Camp Khat 6*3.5 Ft, Nylon Belt, Good Quality 47 Counceelling General Rgister 43, Front Back, 100 Folio 70 Gsm, Numbering, 3 Mm Board Binding 48 C Section Audit Form A4, 04 Leafs In A Set, First Copy Both Side, Stapled. 49 Digital Clock Ajanta, Olc-302 50 Door Mat Synthetic, Green / Blue / Red 51 Death Certificate A4, Front Back, 100 Leaf, 70 Gsm, Pad Binding 52 Discharge Form 9*5.5 Inch, Single Side, 100 Leaf, 70 Gsm, Pad Binding 53 Diet Register 9*17 Inch, Duplicate, Perforation, 50*2, Book Binding, Numbering, 70 Gsm 54 Duty Roster Khata Legal, 150 Folio, 70 Gsm, 3 Mm Board Binding, Numbering, 55 Dot Pen Agni 4G 56 Detergent Powder Sunlight 500 Gm Pack 57 Dengu Form A4, Single Side, 70 Gsm Pad, 100 Sheets, Pad Binding 58 Debit Voucher 9*5.5Inch, Yellow, One Side, 100 Leaf, Pad Binding 59 Disc Number Aluminium For Mother And Baby 60 Daily Utilization Register Legal, Front And Back, 100 Leaf, 70 Gsm, Numbering, 3 Mm Board Binding 61 Dust Bin 2 In 1 Dry & Wet 32 Ltr Nayasa, 28 Liter, Green And Blue 62 Envelop A4 With Cloth Line, Good Quality 63 Envelop Brown, 11*5 Inch, Good Quality 64 Emergency Ticket 9*5.5 Inch, One Side, 100 Leaf, 70 Gsm, Pad Binding 65 Exercise Book No-8, Rule Khata, Oxford / Merit With Numbering, 256 Pages. 66 Electric Kettle 1.8 Liter, Pigeon 67 Extension Cord Anchor, 4 Point, 6 Amp, Wire Length 1.5 Mtr. 68 Ecg Requisition 8.5*6.5 Inch, Duplicate, White Colour, 70 Gsm, 100*2, Numbering.Pad Binding 69 Executive Gel Pen ( Black & Green ) Link Gel Pen Sl-500 70 Emergency Register Ledger Paper, 200 Page, 70 Gsm, Numbering, 3 Mm Board Binding 71 Emplyoee, I Card 10*5 Cm, Lamination, Lace, Card Holder, Colour Digital Printing 72 Emergency Ot Register Legal, 100 Folio, 70 Gsm, Numbering, 3 Mm Board Binding 73 Forcep Stand Sttel, Height 19 Cm 74 Jhul Jharu Gala 75 Flat File 11*13 Inch 76 Fevicol 22.5 Gm 77 Fevistick 15 Gm 78 Foot Operating Bucket 60 Ltr Good Quality 79 Foot Operating Bucket 13 Ltr Good Quality 80 Fever Format A4, Single Side, 100 Leaf, 70 Gsm, Pad Binding. 81 Flow Chart 24*18 Inch, 80 Gsm, Front-Back. 82 Fumigation Register Legal. Front Back, 70 Gsm, Numbering, 3 Mm Board Binding 83 Highlighter Pen Fabre Castle 84 Herpic 500 Ml 85 Hair Remover Cream Veet Hair Remover, 5O Gm 86 House Keeping Register Legal, Front- Back, 70 Gsm, Book Binding, 12 Folio, Numbering. 87 Height Measurement Chart Steel Tape, Wall Fitted 88 Hp Cartridge Ink Black Ink 89 Gala Good Quality Stick 90 Good Night Oil Gold Flash 91 Good Night Machine With Oil Gold Flash 92 Graph Paper For Blood Refrigarator Round Shape, For Blood Bank Refrigarator 93 Injection Register Legal, 100 Folios, 70 Gsm, Numbering, 3Mm Board Binding. 94 Ink For Stamp Pad 60 Ml, Fabre Castle 95 Ipc Book 9*5.5 Inch, Duplicate, Numbering, Book Binding. 50*2 96 Indent Book A4, Duplicate, 50*2, 70 Gsm, 3 Mm Board Binding, Numbering. 97 Issue Register Legal, Front Back, 70 Gsm, 3 Mm Board Binding, Numbering. 98 Injury Report A4, 3 Copy, Single Side Print, Book Binding. 70 Gsm 99 Induction Oven Bajaj 100 Jssk Form A4, Single Side, 70 Gsm, Pad Binding. 100 Leaf Pad 101 Jssk Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 102 Jems Clip Dayal, Metal, 50 Gm 103 Jhinuk Steel No 4 104 Intake Output Chart Legal, Front Print, 100 Leafs, Pad Binding, 70 Gsm 105 Kmc Register A3, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 106 Knife Paper Cutting Knife 107 Key Board Dell 108 Linin Register Legal, Single Side, All Perforation, 100 Sheets, 70 Gsm, Numbering, 3Mm Board Binding. 109 Lock & Key Palam 7 Lever 110 Lock & Key Godrej 7 Lever 111 Line Listintg Forms A4, Front Only, 70 Gsm, 100 Leafs, Pad Binding 112 Labour Room Window & Table Screen Shower Curtain Water Proof 7 Ft*3Ft 113 Marker Pen Board Marker Fabre Castle 114 Marker Pen Permanent Marker Fabre Castle 115 Marker Pen Cd Marker Fabre Castle 116 Mouse Dell 117 Measuring Mug 1 Liter, Good Quality 118 Measuring Tape Good Quality 119 Mothers Discharge Bag 14*18 Inch Non-Woven Bag With One Side Printing 120 Medicine Slip 5.5*4 Inch Front Print, 100 Leafs, 70 Gsm, Pad Binding 121 Match Box Good Quality 122 Magnifying Glass 100 Mm Diameter 123 Money Receipt For Blood Bank 9*5.5, Duplicate, Book Binding, 70 Gsm, 50*2 124 Mouse Pad Good Quality 125 Monthly Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 126 Eye Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 127 Cold Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 128 Emergency Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 129 Cold Ot Performance Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 130 Monthly Case Record Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 131 Maternal Admission Register A4, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 132 Mirror 40Cm*30 Cm, With Back Lamination Board 133 Notice Boiard 3Ft*2 Ft, Good Quality 134 Ncds Mortality Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 135 Nail Cutter Good Quality 136 Net Bucket With Bucket Separately 10 Liter, Multi Colour, Good Quality 137 Note Sheet Pad Legal Ledger Paper, 80 Gsm, 100 Sheet, Pad Binding 138 Opd Medicine Slip A4, In 6 Setup, 70 Gsm, Book Binding, Perforation, 100 Pages In Book 139 Order Book A4, 70 Gsm, Triplicate, 50*3, 3 Mm Board Binding. Numbering 140 Opd Register Legal, 70 Gsm, Back-To-Back, 300 Page, 3 Mm Board Binding.Numbering. 141 Oxygen Log Book A3, Front Back, 3 Mm Board Binding.Numbering.200 Page 142 Osce Format A4 5 Page Front Back 143 Wooden Pencil Apsara, Platinum, 10 Pc Box 144 Paddle Bin 240 Ltr, With Wheel, Good Quality 145 Plastic Tray 12*18 Inch, Multi Colour, Good Quality 146 Patient Satisfection Foem ( Opd ) A3, Front Back, 75 Gsm, 100 Leaves 147 Patient Satisfection Foem ( Ipd ) A4, 5 Leaves In Set, Single Side, 100 Leaves 148 Pencil Cutter Apsara 149 Plastic Container ( 100 Ml ) Good Quality 150 Plastic Container ( 500 Ml ) Good Quality 151 Plastic Container ( 1000 Ml ) Good Quality 152 Plastic Container ( 1600 Ml ) Good Quality 153 Plastic Channel File A4, Good Quality 154 Pathology Form ( Ipd ) Yellow, A4, 75 Gsm, Front Back, Pad Binding, 100 Leaf In A Pad 155 Pathology Form ( Opd ) White, A4, 75 Gsm, Front Back, Pad Binding, 100 Leaf In A Pad 156 Punching Machine Kangaro, ( 52, 8 Cm ) 157 Plastic Gambla 12 Inch Diameter, Multi Colour, Good Quality 158 Plastic Belcha 8 Inch Diameter, Good Quality 159 Plastic Scissor 260Mm, 2.5 Mm 160 Pp Container 8 Inch Length, 6 Inch Width, White Colour, Good Quality 161 Plastic Box 12 Inch Length Good Quality 162 Plastic Box 09 Inch Length Good Quality 163 Ppiucd Form A4, Single Side, Pad Binding, 100 Leafs, 70 Gsm. 164 Plastic Mug 1250 Ml, Goood Quality 165 Plastic Bucket ( 10 Ltr ) Goood Quality 166 Plastic Bucket ( 20 Ltr ) Goood Quality, With Lead 167 Pen Drive 32 Gb Hp 168 Pen Drive 64 Gb Hp 169 Paper Weight Omega Hexa Paper Weight 170 Punching Ball Good Quality 171 Ppicud Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 172 Patient Admitted Particular Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 173 Plastic Carry Bag For Blood Center 30Cm*25Cm. Single Side Printed. Good Quality. 174 Referral Register A4, Front Back, 100 Folios, 70 Gsm, Numbering, 3Mm Board Binding. 175 Refrigarator Temp Chart A4, One Side, 70 Gsm, 100 Leaf Pad, Pad Binding 176 Erazer Apsara 177 Register Book ( No 8 ) Per No 12 Sheets, Numbering, Legal Board Binding 178 Register Book ( No 10 ) Per No 12 Sheets, Numbering, Legal Board Binding 179 Register Book ( No 12 ) Per No 12 Sheets, Numbering, Legal Board Binding 180 Register Book ( No 16 ) Per No 12 Sheets, Numbering, Legal Board Binding 181 Register Book ( No 20 ) Per No 12 Sheets, Numbering, Legal Board Binding 182 Polymer Stamp Per Line 183 Band Aid Round Jhonson And Jhonson 184 Referral Card 6.5*8.5 Inch, Front Back, 90 Gsm, 100 Sheet In Pad 185 Rntcp Form Legal, Front Back, 70 Gsm, Pad Binding, 100 Leaf Pad 186 Rsk Admission Register Legal, Front Back, 200 Folio, 70 Gsm, 3 Mm Board Binding, Numbering 187 Room Freshner Godrej 240 Ml 188 Ribbon Slik Good Quality 189 Swastha Sathi Form A4, Front Only, 70 Gsm, Pad Binding, 100 Leaf Pad 190 Stock Register Legal, 200 Page, Front Back, 3 Mm Borad Binding, Numbering 191 Mrp Sticker Good Quality 1 Inch Length 192 Wooden Spatula 12 Inch, Good Quality 193 Sputam Examination Form 6*8.5 Inch, Front Back, 100 Leaf Pad, 70 Gsm, Pad Binding 194 Stamp Pad 110*69 M, Fabre Castle 195 Swab / Mop Gala 196 Stapler Pin No-10 Kangaro 197 Stapler Pin No-24*6 Kangaro 198 Shaving Blade Good Quality 199 Steel Bowl 4 Inch Diameter 200 Surfexcel Matic For Washing Machine For Washing Machine 201 Tailor Scissor 10 Inch Length Iron 202 Scrotch Bite 7 Cm*7.5 Cm 203 Stapler 10 Kangaro 204 Stapler 24*6 Kangaro 205 Scale Steel Dayal 12 Inch 206 Sparay Container Good Quality 207 Sli Range 12 Inch Tapadia 208 Top Shhet A4, Front Back, 70 Gsm, Pad Binding, 100 Leaf In Pad 209 Temprature Chart A4, Single Side, 70 Gsm Pad Binding, 100 Leaves. 210 Tissue Roll 125 Mt Length, Good Quality 211 T Brush Gala 212 Table Glass 8 Mm Width 213 Treatment Sheets A4, Single Side, 70 Gsm, Pad Binding, 100 Leaves In Pad. 214 Torch Light Eveready 02 Celll Torch 215 Trash Bin 10 Ltr Steel 216 Treatment Sheet For Hdu 25.5 Inch*12 Inch, 120 Gsm, Front Back, 217 Transfer Out Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 218 Usg Requisition Forms 50*2, 6.5 Inch*8.5 Inch, 70 Gsm, Front Print, Numbering, Book Binding, Green And White Paper 219 Utility Gloves 7, 7.5, 8 Inch Good Quality 220 Vaccine Register A3, Front Back, 70 Gsm, 3 Mm Board Binding, 100 Folio, Numbering 221 Vital Sigh Chat A4, Front Only, 70 Gsm, 100 Leaf Pad, Pad Binding. 222 Whitner Pen Fabre Castle 223 White Paper 17*13.5 Inch, White, 70 Gsm, 224 White Board Duster Gripex 6 Inch 225 Wyper Gala 226 Wax Stick Good Quality 227 X Ray / Usg Requisition Forms 6.5*8.5 Inch, 70 Gsm, 100*2, Book Binding, Colour / White Paper , Numbering 228 French Chalk 229 Gum Boot Good Quality 230 Steel Mug 231 Zipper Bag Large 232 Zipper Bag Medium 233 3 Bucket Trolly With Bucket With Squizer
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
West Bengal View Result →
4.
Defence #10506682 Price Bid
Provision Of Conduct Power Quality Audit Of Ht/Lt Equipment Installed At Residential Complex Dehli Cantt => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Delhi View Result →
5.
Housing Urban and Rular Development #10486636 Price Bid
Providing Power Quality And Electrical Safety Audit Of Sanjay Gandhi Hospital Mangolpuri Bhagwan Mahavir Hospital Pitampura Deep Chand Bandhu Hospital Ashok Vihar Delhi
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Delhi View Result →
6.
Housing Urban and Rular Development #10294024 Price Bid
Electrical Safety, Energy And Power Quality Audit At Sub District Hospital Ponda Goa. (Call No.2)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Goa View Result →
7.
Housing Urban and Rular Development #10204288 Price Bid
Repair Maintenance Specialized Electrical And Mechanical Services At Tis Hazari Court Complex, Delhi. (Sh Providing Power Quality And Electrical Safety Audit Of Tis Hazari Main Court Building And Extension Block.)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Delhi View Result →
Delhi View Result →
9.
Educational and Research Institute #10088358 Price Bid
Supply Of Books , Library Books , Machine Design, T. V. Sundararajamoorthy & N. Shanmuga ,Anuradha Publications, Kumbakonam. , Revised Edition June-2003 , Industrial Motor Control., Stephen Herman ,Cengage Learning , 6Th Edition , Electrical Technology, Edward Hughes ,Addision– Wesley International Student Edition , Latest Edition , Mysql, Paul Dubois ,Addison Wesley , 4Th Edition , No Sql Distilled, Pramod J. Sadalage Martin Fowler ,Addison Wesley , 1St Edition Or Latest Reprint , American Society Of Metals – Hand Book – Volume 4 ( Forming), American Society Of Metals,American Society Of Metals , Latest Edition , Programmable Controller Theory And Implementation, L.A.Bryan E.A.Bryan ,An Industrial Text Company Publication , Latest Edition , Biomedical Instrumentation, M. Arumugam ,Anuradha Publications, Chennai , Latest Edition , Android Apps For Absolute Beginners, Jackson ,Apress , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Arasan Ganesan Institute Of Technology , 1993 , Home Refrigeration And Air Conditioning, Audels, Theo. ,Audel & Co. Publisher, New York. - 1998 , 199 Edn.49 , Remote Sensing And Geographical Information System, M.Anji Reddy ,B.S Publications , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , 1997 , Exploring Programmable Logic Controller With Applications, Pradeep Kumar Srivastava ,Bpb Publication , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , Latest Edition , Advanced Mobile Repairing, Pandit Sanjib ,Bpb Publication , First Edition 2010 , Modern Vcd Video Cd Player Introduction, Servicing And Troubleshooting, Manohar Lotia & Pradeep Nair ,Bpb Publication , Latest Edition , Explosing Programmable Logic Controllers With Application., Pradeep Kumar Srivastava. ,Bpb Publication , Latest Edition , Let Us C, Yeswanth Kanetkar ,Bpb Publication , 16Th Edition , Programmable Logic Controller, Pradeep Kumar & Srivashtava ,Bpb Publication , Latest Edition , Modern Computer Hardware Course, Manahar Lotai, Pradeep Niar, Payal Lotia ,Bpb Publication , Second Revised Edition 2011 , Inside Autocad, D. Raker And H. Rice,Bpb Publication , Latest Edition , Text Book Of Environmental Science And Technology, M.Anji Reddi ,Bs Publications , Latest Edition , Book 1 - General Aspect Of Energy Management And Energy Audit,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , Book 3 - Energy Efficiency In Electrical Utilities,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , National Building Code Of India – 2005,,,Bureau Of Indian Standards, New Delhi , Latest Edition , Total Quality Management, Oakiand.J.S.,Butterworth Heinemann Ltd. Oxford , 1989 , The Art Of Electronics, Paul Horowitz ,Cambridge University , 2Nd Edition Press , Performance And Design Of Ac Machine, M.G.Say ,Cbs Publisher & Distributor , Latest Edition , A Text Book Of Soil Mechanics, Dr S B Sehgal ,Cbs Publisher & Distributors , Latest Edition , Building Repair And Maintenance Management, P.S.Gahlot ,Cbs Publisher & Distributors (P) Ltd , Latest Edition , Learning Material Development Project – Nitttr,,Cd Programme On Gps And Gis. , Latest Edition , Introduction To Programmable Logic Controllers, Gary Dunning ,Cengagelearning India Pvt Ltd , Latest Edition , Building Materials, S.C.Rangwala ,Charotar Publishing House , 1982 , Building Construction, S.C.Rangwala ,Charotar Publishing House , Latest Edition , Mechanics Of Structures (Vol Ii), S.B. Junnarkar ,Charotar Publishing House , 22Nd Edition , Highway Engineering, Rangwala ,Charotar Publishing House , 2010 , Railway Engineering, Rangwala ,Charotar Publishing House , 2010 , Bridge Engineering, Rangwala ,Charotar Publishing House , 2009 , Estimating & Costing, Rangawala ,Charotar Publishing House , Latest Edition , Construction Of Structures And Management Of Works, Rangwala.S.C ,Charotar Publishing House , Latest Edition , Machine Design, Pandya & Shah ,Charotar Publishing House , 1995 , Principle Of Geographical Information Systems For Land Resources Assessment, Burrough P.A. (2000) ,Clarendon Press, Oxford. , Latest Edition , Technician’S Guide To Programmable Logic Controllers, Richard A. Cox ,Delmer , Sixth Edition 2011 , Principles Of The Manufacturing Of Composite Materials , Suong V Hoa, ,Des Tech Publication. Inc , Latest Edition , Strength Of Materials, S.Ramamirtham ,Dhanpat Rai , 2003 , A Course In Electrical And Electronics Measurements And Instrumentation., A.K. Sawhney Puneet Sawhney ,Dhanpat Rai , Latest Edition , Estimating & Costing, L.N.Dutta ,Dhanpat Rai , Latest Edition , Thermal Engineering., B.K. Sarkar. ,Dhanpat Rai , 3Rd Edition , Internal Combustion Engines, M.L.Mathur & R.P.Sharma ,Dhanpat Rai , Latest Edition , Mechanical Draughtsmanship,G.L. Tamta, Dhanpat Rai ,Dhanpat Rai , Latest Edition , Engineering Drawing, D.N. Ghose ,Dhanpat Rai , Latest Edition , A Course In Electrical Power, Soni & Gupta ,Dhanpat Rai , Latest Edition , Hydraulics,Fluid Mechanics And Hydraulics Machines, S. Ramamirtham ,Dhanpat Rai , Latest Edition , Modern Electric Traction, H Partab ,Dhanpat Rai , Latest Edition , Mechanical Measurements, A.K.Sawhney-Dhanpat Rai & Sons ,Dhanpat Rai , Latest Edition , Electronic Measurements And Instrumentation, Sanjay Talbar & Akhilesh Upadhyaya ,Dhanpat Rai , 2004 , Electrical And Electronic Measurements And Instrumentation, A.K.Sawheney ,Dhanpat Rai , 1993 , A Coursein Electricalpower, Soni, Gupta ,Dhanpat Rai , Latest Edition , Strength Of Materials, S. Ramamrutham ,Dhanpat Rai , 15 Edn 2004 , Course In Electrical Machine Design, A.K.Sawhney ,Dhanpat Rai , Latest Edition , Electrical Technology, B.L.Theraja ,Division Of Nirja Constructions And Dev Co.(P) Ltd , 1994 , Design Data Book, Psg College Of Technology ,Dpv Printers, Coimbatore , Latest Edition , Suftware Testing Concepts And Tools, Nageshwara Rao Pusulri ,Dreamteach , First Edition , Automotive Mechanics, Joseph Heitner ,East West Press (P) Ltd, New Delhi , Latest Edition , Renewableenergy Sources , Twidell, J.W. And Weir, ,Efn Spon Ltd , Latest Edition , Vehicle And Engine Technology, Heinz Heisler ,Elbs , Latest Edition , Programmable Logic Controller, W. Bolton ,Elsevier India Pvt Ltd , Iv Edition , Principles And Practice Of Town And Country Planning, Lewis B. Keeble ,Estates Gazette, University Of Michigan , 2010 , A Text Book On Building Services, R.Udyakumar ,Eswar Press, Chennai , Latest Edition , Fluid Mechanics, K.L.Kumar ,Eurasia Publshing House - New Delhi , Latest Edition , A Text Book Of Machine Design., R.S. Khurmi & J.K.Gupta ,Eurosia Publishing House - New Delhi ,Edn. 18 , Mechanical Measureme Control, R.V. Jalgaonk ,Everes T Publishing House, Pune , Latest Edition , The Cell Phone Handbook, P.J. Stetz And Penelope Stetz ,Findtech Ltd , Second Edition , Pc Repair And Maintenance, Joel Rosenthal ,Fire Wall Media, New Delhi , First Edition 2007 Reprint :2012 , Software Engineering, Bharat Bhusan Agarwal, Sumit Prakash Tayal ,Fire Wall Media, New Delhi , Second Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , Multimedia Technology & Applications,, David Hillman ,Galgotia Publications Pvt Ltd. , Latest Reprint , Repair And Seismic Strengthening Of Buildings - Guidelines, Is:13935 - 2002,,Guidelines, Is:13935 , 2002 , Automotive Mechanics, William H.Crouse And Donald .L. Anglin ,Hill Publishing Company Ltd, New Delhi , Latest Edition , Die Design Fundamentals, Paquin.J.R,,Industrial Press Inc , Latest Edition , Digital And Analog Communication System, B.P.Lathi .Zhi Ding ,International Oxford University Press , 4Th Edition , Mysql Bible, Steve Suehring ,John Wiley & Sons , 2002, Latest Reprint , Modern Production / Operations Management, E.S. Buffa And R.K. Sarin ,John Wiley & Sons , Latest Edition , Remote Sensing And Image Interpretation, Lillesand, T.M. & Kiefer R.W. (1998) ,John Wiley & Sons , Latest Edition , Ground Water Hydrology, David Keith Todd ,John Wiley & Sons , Latest Edition , Digital Communications, Simon Haykin ,John Wiley India Edition , Latest Edition , Cad/Cam, Mikell P.Groover ,Jr.Prentice Hall Of India Pvt., Ltd. , Latest Edition , A Course In Electrical Power, J.B. Gupta ,Kaison Publishing House , Reprint 2004 , Civil Estimating, Costing And Valuation,,Kalson Publishing House , Latest Edition , Machine Drawing, P.S. Gill ,Katsan Publishing House , Latest Edition , Analysis Of Structures – Vol 1, Vazirani & Ratwani ,Khanna Publishers , Latest Edition , Quantity Surveying & Valuation, N.A.Shaw ,Khanna Publishers , Latest Edition , Water Supply And Sanitary Engineering, S.K.Garg ,Khanna Publishers , Latest Edition , Hydrology And Water Resources Engineering, Santhosh Kumar Gar ,Khanna Publishers , Latest Edition , Fluid Mechanics, Prof. S. Nagarathinam - ,Khanna Publishers , Latest Edition , Workshop Technology ,Raghuwanshi,Khanna Publishers , Latest Edition , Production Technology,Nai Sarak ,Khanna Publishers ,Edn. Xii , Thermal Engineering, P.Lballaney ,Khanna Publishers , 24Th Edition , Production Technology, Jain & Gupta ,Khanna Publishers , Latest Edition , Automobile Engineering, G.B.S.Narang ,Khanna Publishers , Latest Edition , Thermal Engineering, P.L Ballaney,Khanna Publishers , 24Th Edition , Applied Thermodynamics, Domkundwar And C.Pkothandaraman ,Khanna Publishers ,2Nd Edition , Non Conventional Energy Sources, G.D. Rai,Khanna Publishers , 1999 , Industrial Engineering And Management, O.P. Khanna ,Khanna Publishers , Latest Edition , Refrigeration And Air Conditioning, P.L . Ballaney ,Khanna Publishers , Latest Edition , Electric Circuit Theory, Dr.M.Arumugam Dr.N.Premkumaran ,Khanna Publishers , Latest Edition , Electrical Power, S.L Uppal ,Khanna Publishers , Latest Edition , Electrical Wiring, Estimating And Costing, Dr.S.L.Uppal G.C. Garg ,Khanna Publishers , Sixth- 2011 , Electric Circuit Theory, M. Arumugam, N. Premkumaran ,Khanna Publishers , 1997 , Power Electronics, P.S.Bimbhra, ,Khanna Publishers , 5Th Edition 1994 , Integrated Circuits, K.R. Botkar ,Khanna Publishers , Latest Edition , Satellite Communication, D.C. Agarwal ,Khanna Publishers , Third Edition , A Monograph On Electronic S Design Principles,, N.C.Goyel, R.K.Khetan, ,Khanna Publishers , Second Edition , Operating Systems, Ekta Walia ,Khanna Publishers , 2Nd Edition , Data Structures, Rs Salaria ,Khanna Publishers , 2016 , Electric Power, Sl Uppal ,Khanna Publishers , Latest Edition , Testing, Commissioning, Operation And Maintenance Of Electrical Equipments, S.Rao ,Khanna Publishers , Sixth Edition, 2010 , Electrical Estimation And Costing, Surjit Singh ,Khanna Publishers , Latest Edition , Power Electronics, Dr.P.S.Bimbhra ,Khanna Publishers , Fourth Edition, 2011. , Mechanical & Indtrial Measuments, R.K.Jain ,Khanna Publishers , Latest Edition , Construction Management, Sanga Reddy. S ,Kumaran Publications, Coimbatore , Latest Edition , Fluid Mechanics, R.K. Bansal ,Lakshmi Publications , Latest Edition , Total Quality Management,, V.Jayakumar ,Lakshmi Publications. , (Reprint 2005) , Thermal Enggi., R.K . Rajput,Laxmi Publications Pvt Ltd , 8Th Edition , Fluid Mechanics And Hydraulic Machines, R. K. Bansal ,Laxmi Publications Pvt Ltd , Latest Edition , Engineering Mechanics, R K Bansa ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Dr. B.C. Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Ashokkumar Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume I, Punmia.B.C. Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , 2011 , Theory Of Structures, B.C. Punmia, Ashok Jain & Arun Jain ,Laxmi Publications Pvt.Ltd. , 9Th Edition , Surveying Volume I, Punmia.B.C, Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume Ii & Iii, Punmia.B.C, Ashok Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Limit State Design Of Reinforced Concrete, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , R C C Designs, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Environmental Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Waste Water Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Soil Mechanics And Foundation Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Project Planning And Control With Pert And Cpm, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Buildingconstruction, Dr.B.C.Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Strength Of Materials, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 3Rd Edition, 2010. , Engineering Mechanics, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 2Nd Edition, 2007 , Thermal Engg, R.K .Rajput ,Laxmi Publications Pvt Ltd , 8Th Edition , Industrial Robotics – Technology, Programming And Applications, P.Groover ,Mc Graw Hill , 2001 , Mobile Cellular Communications, W.C.Y. Lee ,Mc Graw Hill , Second Edition , Electronic Principles And Applications, Charles.A.Schuler ,Mc Graw Hill , 3Rd Edition, 1989 , Geotechnical Earthquake Engineering Hand Book, Robert W.Day ,Mc Graw Hill , Latest Edition , Measurement Systems Application And Design, Ernest O. Doebelin ,Mc Graw Hill , 2004 , Transducers And Instrumentation, D.V.S.Murty ,Mc Graw Hill , 2004 , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , Latest Edition , Digital Integrated Electronics, Taub & Schlling ,Mc Graw Hill , Latest Edition , Optical Fibre Communication, Gerd Keiser ,Mc Graw Hill , Third Edition , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , 1994 , Computer Control Of Manufacturing Systems, Yoram Koren ,Mc Graw Hill , Latest Edition , Engineering Economics And Management, T.R. Banga & S.C. Sharma ,Mc Graw Hill , Editiion 2 – 2001 , Database System Concepts, Silberschatz A. And Korth H ,Mcgraw Hill Education (India) Pvt Limited , 6Th Edition , A Global Perspective, Heinz Weihrich, Harold Koontz ,Mcgraw Hill International Edition ,10Th Edition , Hessentials Of Management’, Herald Koontz And Heinz Weihrich ,Mcgraw Hill Publishing Company , Latest Edition , Power Electronics, Md Singh, Kb Dhanchandaniata ,Mcgraw Hill Publishing Company , Seventeenth Reprint 2005 , Operating Systems, A Concept-Based Approach, Dhananjay M. Dhamdhere ,Mcgraw Hill, Indian Edition , 3Rd Edition , Elements Of Photogrammetry, Wolf Paul (1998) ,Mcgraw Hill, New Delhi , Latest Edition , Manufacturing Process, Begeman . ,Mcgraw Hill, New Delhi1981. , 5Th Edition , Introduction To Environmental Engineering, Mackenzie, L. Davis And A. David, Cornwell. ,Mcgrawhill , Latest Edition , Environmental Engineering, Peary, Rowe And Tchobanoglous ,Mcgrawhill , Latest Edition , Fundamentals Of Digital Logic With Vhdl Design, Stephen Brown And Vranesic ,Mcgrawhill , Latest Edition , Programmable Logic Handbook: Pld, Cpld, And Fpga, Ashok K.Sharma ,Mcgraw-Hill , Latest Edition , Javascript: The Complete Reference, Powell, Thomas ,Mc-Grawhill , 3Rd Edition , Html & Css: The Complete Reference, Thomas Powell ,Mc-Grawhill , 5Th Edition , Jsp: The Complete Reference, Phil Hanna ,Mc-Grawhill , 2Nd Edition , Robotics For Engineers, Yoram Koren ,Mcgraw-Hill Book Co., , 1992 , “Basic Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Advanced Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Hand Book Of Die Design, Ivana Suchy ,Mcgraw-Hill Book Company , Latest Edition , Tool Engineers Hand Book, Astme ,Mcgraw-Hill Book Company , Latest Edition , Robotics Control, Sensing, Vision And Intelligence, Fu.K.S.Gonzalz.R.C., And Lee C.S.G ,Mcgraw-Hill Book Company , 1987 , Audio And Video System – Principles, Maintenance And Troubleshooting , R.Gupta. ,Mcgraw-Hill Book Company ,Second Edition , Computer Organization, V.Carl Hamacher, Zvonko G.Vransic, Safgat G.Zaky ,Mcgraw-Hill Book Company , 5Th Edition , Elements Of Workshop Technology Volume I & Ii, Hajra Chowdry & Bhattacharaya,Media Promoters & Publishers , Latest Edition , Operation And Maintenance Of Electrical Equipment – Volume I & Ii, B.V.S.Rao ,Media Promoters & Publishers , 1St Edition, 1St Reprint 2011 , Elements Of Workshop Technology- Vol. I & Ii,Hajra Choudry & Battacharya ,Media Promoters & Publishers , Latest Edition , Hydraulic Machines, Jagadishlal, ,Metropolitan Book Company New Delhi , Latest Edition , Fluid Mechanics And Hydraulic Machines, Dr. Jagadish Lal ,Metropolitan Book Company New Delhi , Latest Edition , Mechanical Measurements &Control, D.S.Kumar ,Metropolitan Book Company New Delhi , Latest Edition , Introducing Microsoft .Net, David S.Platt ,Microsoft Press , 3Rd Edition , Computer Organization And Design, David A. Patterson And John L. Hennessey ,Morgan Kauffman / Elsevier , 5Th Edition , Complete Knowledge In C, Sukhendu Dey, Debobrata Dutta ,Narosa Publishing House, New Delhi , Reprint 2013 Or Latest Reprint , Software Testing, K.Mustafa And R.A.Khan ,Narosa Publishing House, New Delhi , Reprint 2009 , Software Quality, R.A. Khan, K.Mustafa And Si ,Narosa Publishing House, New Delhi , Reprint 2008 , Building Materials, S.K.Dugga ,New Age International (P) Ltd , 2003 , Reinforced Concrete Design, N Krishnaraju ,New Age International (P) Ltd , Latest Edition , Design Of R C C And Structural Elements ( Rcc Vol I), S S Bhavikatti, ,New Age International (P) Ltd , Latest Edition , G I S Basics, Shahab Fazal ,New Age International (P) Ltd , Latest Edition , Irrigation And Water Resources Engineering, G.L.Asawa ,New Age International (P) Ltd , Latest Edition , Basic Geotechnical Earthquake Engineering,,New Age International (P) Ltd , Latest Edition , Maintenance Of Buildings, A C Panchdhar ,New Age International (P) Ltd , Latest Edition , Engineeringdrawing And Graphics + Autoca, K.Venugopal, ,New Age International (P) Ltd , Latest Edition , Control Of Machines, S.K Bhattacharya ,New Age International (P) Ltd , Second Edition- Reprint 2010 , Quality Manageme, Narayana.V And Sreeniva N.S ,New Age International (P) Ltd , 1996 , Cad/Cam/Cim, R.Radhakrishnan, S.Subramanian ,New Age International (P) Ltd , Latest Edition , Electrical Power System, Clwadhawa ,New Age International (P) Ltd , Fourth Edition, 2009 , Hvdc Power Transmission System & Technology, Kr. Padiyar ,New Age International (P) Ltd , Reprint 2005 , Digital Protection – Protective Relaying From Electromechanical To Microprocessor, Lp Singh ,New Age International (P) Ltd , Second Edition 1997 , Electrical Design Estimating And Costing, K.B.Raina& S.K.Battacharya ,New Age International (P) Ltd , Reprint - 2011 , Control Of Electrical Machines., S.K. Bhattacharya ,New Age International (P) Ltd , Latest Edition , Power Electronics, Mohammed H.Rashid ,New Age International (P) Ltd , Third Edition,2004 , Programming In C, D.Ravichandran ,New Age International (P) Ltd , 1St Edition 1996, Latest Reprint , Linear Integrated Circuits, D.Roychoudhury & Shail.B. Jain ,New Age International (P) Ltd , 2Nd Edition, 2004. , Modern Television Practice– Transmission, Reception, Applications, R.R.Gulati,New Age International (P) Ltd , 5Th Edition , Monochrome & Color Tv , R.R.Gulati ,New Age International (P) Ltd , Latest Edition , Computer Fundamentals Architecture And Organization, B. Ram ,New Age International (P) Ltd , 5Th Edition , Principles Of Data Structures Using C And C++, Vinu V.Das ,New Age International (P) Ltd , Latest Reprint , Practical Scada For Industry, David Bailey Edwin Wright ,Newness , Latest Edition , Programmable Logic Controllers, W. Bolton ,Newness , Latest Edition , Practical C Programming, Steve Oualline ,O’Reilly , 3Rd Edition , Programming Php, Rasmus Lerdorf And Kevin Tatroe ,O’Reilly Publications , 3Rd Edition , Java, A Beginners Guide, Herbert Schildt ,Oracle Press , 6Th Edition , Pc Hardware In A Nutshell, Robert Bruce Thompson. ,Oreilly Media , Third Indian Reprint 2008. , Principles Of Electrical Machine Design, S.K.Sen ,Oxford & Ibh , Latest Edition , Principles Of Gis For Land Resources Assessment, Burrough P A ,Oxford Publication , Latest Edition , Programming In C, Reema Thereja ,Oxford University Press , 2Nd Edition , Digital Electronics, G.K.Kharate ,Oxford University Press , 2010 , Software Engineering Concepts And Application, Subhasjit Dattun ,Oxford University Press , 2010 , Software Engineering Fundamentals, Ali Behforooz And Fredick J Hudson ,Oxford University Press , 2005 , Reinforced Cement Concrete, Mallick And Rangasamy ,Oxford & Ibh , Latest Edition , Digital Communications Fundamentals And Applications, Bernard Sklar & Pabitra Kumar Ray ,Pearson Education , Latest Edition , Advanced Surveying, Sathesh Gopi, R.Sathikumar & N.Madhu ,Pearson Education , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C , Mazidi,Mazidi And D.Mackinlay,,Pearson Education , Latest Edition , Programmable Logic Controllers – Programming Methods And Applications, John R Hackworth And Fredrick D.Hackworth ,Pearson Education , Latest Edition , Principles Of Wireless Networks– A Unified Approach, Kaveh Pahlavan And Prashant Krishnamoorthy ,Pearson Education , 2002 , Electronic Communications Systems - Fundamentals Through Advanced, Wayne Tomasi ,Pearson Education , Fifth Edition , Digital Design, M.Morris Mano Michael D Ciletti ,Pearson Education , Latest Edition , 8051 Microcontrollers, Mazidi And D.Mackinlay ,Pearson Education , Latest Edition , Principles Of Wireless Networks – A Unified Approach, Kaveh Pahlavan And Prashant Krishnamurty ,Pearson Education , Latest Edition , Wireless Communications Principles And Practice, Theodore S. Rappaport ,Pearson Education , Latest Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Second Edition , Mobile Cellular Communication, Gottapu Sasibhushana Rao ,Pearson Education , Latest Edition , Operating System, Internal And Design Principles, William Stallings ,Pearson Education , 9Th Edition , Operating Systems, Deitel And Deitel ,Pearson Education , 3Rd Edition , Computer Organization And Architecture Designing For Performance, William Stallings ,Pearson Education , 10Thedition , Network Security Essentials, William Stallings ,Pearson Education , 5Th Edition , Cryptography And Network Security, William Stallings ,Pearson Education , 6Th Edition , Computer Networks, Andrew S.Tanenbaum ,Pearson Education , 5Th Edition , Web Development And Design Foundations With Html5, Terry Felke-Morris ,Pearson Education , 8Th Edition , Software Engineering, Ian Sommerville ,Pearson Education , Sixth Edition , Software Testing Principles And Practices, Srnivasan Desikan, Gopalswamy Ramesh ,Pearson Education , First Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Latest Edition , Fundamental Of Multimedia, Ze- Nian Li And M.S.Drew. ,Pearson Education , 2Nd Edition , Multimedia Computing, Communication And Applications, Ralf Steinmetz And Klara Nahrstedt ,Pearson Education , Latest Reprint , Multimedia Systems, John F. Koegel Buford ,Pearson Education , Latest Reprint , Total Quality Management, Date H.Besterfiled ,Pearson Education Asia. , Latest Edition , Automation, Production Systems, And Computer-Integrated Manufacturing, Mikell P. Groover ,Pearson Education Asia. , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C, Mazidi,Mazidi And D.Mackinlay ,Pearson Education Low Price Edition. , Latest Edition , Design Of Steel Structures, K.S.Sai Ram ,Pearson-Porling Kindersley Pvt Ltd , Latest Edition , 8051 Microcontroller, Kenneth Ayala ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Plc And Industrial Automation An Introduction, Madhuchhanda Mitraand Samarjit Sen Gupta ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Industrial Energy Conservation-, D. A. Ray- ,Pergaman Press , Latest Edition , Electronics Devices And Circuit Theory, Boyestad & Nashelsky ,Phi , Latest Edition , Electronic Devices & Circuits An Introduction, Allen Mottershed,Phi , Latest Edition , Computer Graphics Multimedia And Animation,, Malay K. Pakhira ,Phi , 2Nd Edition , Principles Of Digital Electronics, K.Meena ,Phi , 2011 , Operational Amplifiers And Linear Integrated Circuits, Robert F. Coughlin Frederick F. Driscoll ,Phi , 1992 , Op. Amp & Linear Integrated Circuits, Ramakant. A. Gayakwad ,Phi , 1992 , Digital Electronics- An Introduction To Theory And Practice, William H.Gothmann ,Phi , 1998 , Transducers And Instrumentation, Dvs Murty ,Phi , 2009 , Measurement And Instrumentation, Arun. K ,Phi , 2010 , Sensor And Transducers, D. Patranabis ,Phi , 2011 , Elements Of Engineering Mechanics, Sanchayan Mukherjee ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass, ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Limit State Design Of Reinforced Concrete, P C Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, .M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Principles Of Environmental Science And Engineering,, P.Venugopala Rao ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Irrigation And Water Power Engineering, Madan Mohan Das&Mimi Das Saikia ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Buildingconstruction, P.C.Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Energy Engineering And Management, Amlan Chakrabarti ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Power Electronics, M.S.Jamil Asghar ,Phi Learning Pvt. Ltd., New Delhi. , Eastern Economy Edition, 2010 , Principles Of Digital Electronics, K.Meena ,Phi Learning Pvt. Ltd., New Delhi. , 2009 , Operating System, Principles & Design, Pabitra Pal Chaudhuri ,Phi Learning Pvt. Ltd., New Delhi. , 1St Edition , Computer Organization & Architecture, Rajaraman ,Phi Learning Pvt. Ltd., New Delhi. , Latest Reprint , Fundamentals Of Software Engineering, Rajib Mall ,Phi Learning Pvt. Ltd., New Delhi. , 28Th Printing – August 2011 , A Textbook On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Electronics Devices And Circuit Theory , Boyestad & Nashelsky ,Phi Publication, New Delhi , 2009 , Electronicsdevices And Circuits, Allen Mottershed ,Phi Publication, New Delhi , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D.Helfrick And Willam David Cooper ,Phi Publication, New Delhi , 1996 , A Text Book On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Power Electronics, M.H.Rashid ,Phi Publication, New Delhi , 3Rd Edition-2005 , Industrial Electronics And Control, Biswanath Paul ,Phi Publication, New Delhi , 2Nd Edition -2010 , Programmable Logic Controllers, Frank D.Petruzela ,Phi Publication, New Delhi , 2Nd Edition- 1998 , Programmable Logic Controllers Principles And Applications, John W. Webb. Ronald A. Reis ,Phi Publication, New Delhi , Latest Edition , Networks Lines And Fields, John D.Ryder ,Phi Publication, New Delhi , Latest Edition , Electronic Communication, Dennis Roddy And John Colen ,Phi Publication, New Delhi , Latest Edition , Principles Of Digital Electronics, K.Meena ,Phi Publication, New Delhi , Latest Edition , Digital Electronics, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Digital Electronics – An Introduction To Theory And Practice, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Ramakant A Gayakwad ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Robert F.Coughlin And Frederick F.Driscoll ,Phi Publication, New Delhi , Latest Edition , Microcontrollers, Principles And Applications, Ajit Pal ,Phi Publication, New Delhi , Latest Edition , Vhdl Primer, Bhasker J ,Phi Publication, New Delhi , Latest Edition , Digital Electronics With Pld Integration, Nigel P. Cook ,Phi Publication, New Delhi , Latest Edition , Digital Logic Simulation And Cpld Programming With Vhdl, Steve Waterman ,Phi Publication, New Delhi , Latest Edition , Data And Computer Communications, William Stallings ,Phi Publication, New Delhi , Latest Edition , Computer Networks , Andrew S.Tanenbaum ,Phi Publication, New Delhi , Latest Edition , Wireless Digital Communications, Kamilo Feher ,Phi Publication, New Delhi , Latest Edition , Wireless Communications And Networks, William Stallings ,Phi Publication, New Delhi , Latest Edition , Irrigation Water Management, Dilip Kumar Majumdar ,Phi Publication, New Delhi , Latest Edition , Multimedia Systems Design., Prabhat K.Andleigh, Kiran Thakra ,Phi Publication, New Delhi , Latest Edition , Performance And Design Of Ac Machines, M.G.Say ,Pitman Publishing Ltd , Latest Edition , Principles Of Management, M.Govindarajan And S.Natarajan ,Prentice-Hall Of India (P) Ltd , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D. Helfrick William David Cooper ,Prentice-Hall Of India (P) Ltd , Latest Edition , Building Materials, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Building Constructions, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Geographic Information Systems, Lo & Yeung (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Geographic Information Systems & Environmental Modelling, Clarke Parks & Crane (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Foundation Design, Wayne C.Teng ,Prentice-Hall Of India (P) Ltd , Latest Edition , Operations Research, H.A.Taha ,Prentice-Hall Of India (P) Ltd , Latest Edition , Total Quality Management – An Introductory Text, Paul James ,Prentice-Hall Of India (P) Ltd , Latest Edition , Electronic Device And Circuits- An Introduction, Allen Mottershed,Prentice-Hall Of India (P) Ltd , Latest Edition , Techniques Of Press Working Sheet Metal, Donald F. Eary. & Edward A. Reed ,Prentice-Hall Of India (P) Ltd , Latest Edition , Essentials Of Management, Joseph L.Massie ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Elements Of Electrical Engineering, Maria Louis ,Prentice-Hall Of India (P) Ltd , Latest Edition , Digital Electronics, William H.Gothmann ,Prentice-Hall Of India (P) Ltd , Latest Edition , Programmable Logic Controllers – Principle And Applications, John W. Webb ,Prentice-Hall Of India (P) Ltd , Latest Edition , Computer Networks, Andrew S.Tanenbaum ,Prentice-Hall Of India (P) Ltd , 2002 , Data And Computer Communications, William Stallings ,Prentice-Hall Of India (P) Ltd , Eighth Edition 2007 , Computer System Architecture, M.Morris Mano ,Prentice-Hall Of India (P) Ltd , 3Rd Edition , Data Structures A Programming Approach With C, Dharmender Singh Kushwaha And Arun Kumar Misra ,Prentice-Hall Of India (P) Ltd , 2012, Latest Reprint , Classic Data Structures, Debasis Samanta ,Prentice-Hall Of India (P) Ltd , 2Nd Edition , The Internet, Douglas E.Comer ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Introduction To Biomedical Instrumentation, Mandeep Singh,Prentice-Hall Of India (P) Ltd , Latest Edition , Iso 9001, Brain Rethry, Brain Rethry ,Productivity And Quality Publishing Pvt. Ltd. , 1993 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 2008 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 23Rd Edition , Limit State Theory And Design Of Reinforced Concrete, S.R.Karve And V.L.Shah ,Puna Vidyarthi Griha, Prakashan , 5Th Edition , A Course In Electrical And Electronics Measurements And Instrumentation, A.K. Sawhney ,Puneet Sawhney Dhanpat Rai & Co (P) Ltd. , Latest Edition , Upgrading And Repairing Laptops, Scott Mueller ,Que Publication , Latest Edition , A Text Book Of Fluid Mechanics And Hydraulic Machines,By, R. K Rajput And S.Chand ,R. K Rajput And S.Chand & Co, New Delhi , Latest Edition , Training Manual On Iso 9001 : 2000 & Tqm, Girdhar J.Gyani ,Raj Publishing House , Latest Edition , Electrical Machine Design, A.Naoor Kani ,Rba Publications , Latest Edition , A Course In Electrical Engineering , B.L.Theraja ,S.Chand & Company Ltd, New Delhi ,Reprint 2006 , A Text Book Of Transportation Engineering, S P Chandola ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R.S.Khurmi ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R. S. Khurmi, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Production Technology , P. C. Sharma ,S.Chand & Company Ltd, New Delhi ,Edn. X , Thermal Engineerin, , R.S. Khurmi, J.K Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , A Text Book Of Hydraulics, Fluid Mechanics And Hydraulic Machines,R.S. Khurmi ,S.Chand & Company Ltd, New Delhi ,Edn.18 , Thermal Engineering, R.S. Khurmi And J.K. Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , The Automobile, Harbans Singh Reyat, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Non Conventional Energy Sources And Utilisation , R.K. Rajput - S.Chand ,S.Chand & Company Ltd, New Delhi , 2012 , A Text Book Of Electrical Technology Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , A Text Book Of Electrical Technology -Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , Principles Of Power System, V.K.Metha ,S.Chand & Company Ltd, New Delhi , 4Th Edition Reprint 2007 , Electronic Measurements And Instrumentation, R.K.Rajput ,S.Chand & Company Ltd, New Delhi , 3Rd Edition 2009 , Computer Concepts And C, Dr.S.S.Khandare ,S.Chand & Company Ltd, New Delhi , 1St Edition 2010, Latest Reprint , Electrical Technology Vol I And Ii, B.L.Theraja ,S.Chand & Company Ltd, New Delhi , Mutiple Colour Edition,2012 , Principles Of Electronics, V.K.Mehta ,S.Chand & Company Ltd, New Delhi , Second Edition , Electronics And Instrumentation, Dr.S.K.Battachariya Dr. Renu Vig ,S.K. Kataria & Sons, New Delhi , Latest Edition , Principles Of Electrical Machine Design, R.K.Agarwal ,S.K. Kataria & Sons, New Delhi , Latest Edition , Environmental Engineering And Management, Dr.Suresh K.Dhameja- ,S.K. Kataria & Sons, New Delhi , Latest Edition , Soil Mechanics & Foundation Engineering, V N S Murthy ,Sai Kripa Technical Consultants , Latest Edition , Digital Communications, Dr.K.N.Hari Bhat Dr.D.Ganesh Rao ,Sanguine Technical Publisher , Latest Edition , Energy Resource Management, Kirpal Singh Jogi- Sarup And Sons ,Sarup And Sons , Latest Edition , A Course In Electrical And Electronic Measurement And Instrumentation, Umesh Sinha ,Satya Prakashan, New Delhi , Latest Edition , Electrical And Electronics Measurements And Instrumentation, Umesh Sinha ,Satyaprakashan Tech , 1992 , Theory And Problems Of Machine Design, Holowenko, Laughlin ,Schaum’S Outline Series. , Latest Edition , Data Structures With C, Seymour Lipschutz ,Schaums Outlines, Tmh , Latest Reprint , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication , Latest Edition , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication, Chennai. , Latest Edition , Limit State Design Of Concrete Structures, Dr.S.Ramachandra ,Scientific Publishers , Latest Edition , Murach’S Mysql, Joel Murach ,Shroff / Murach , 2012, Latest Reprint , Fundamentals Of Tool Design, Dr.John G.Nee ,Society Of Manufacturing Engineers. , Latest Edition , Electrical Machine Design, C.Eswarlal ,Sonaversity , Latest Edition , A Concise Introduction To Software Engineering, Pankaj Jalote ,Springer, Latest Edition , Design Of Electrical Machine, Mittle V.N ,Standard Book – House , Latest Edition , Fluid Mechanics, P.N. Modi & S.M. Sethi ,Standard Publishers & Distributors, New Delhi , Latest Edition , Water Supply And Sanitary Engineering Vol I & Ii, Gurcharan Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Hydraulics, Fluid Mechanics And Hydraulics Machines, K.R. Arora ,Standard Publishers & Distributors, New Delhi , Latest Edition , Automobile Engineering Vol- 1, Vol – 2,Kirpal Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Learning Material Development Project,,Taramani, Chennai, Cd Programme On Gps And Gis , Latest Edition , Principles Of Transportation & Highway Engineering, G V Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, N.N. Basak ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, A.Kamala,D.L.Kanthrao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Engineering Hydrology, K.Subramanya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Production And Operations Management, S.N. Chary ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Essentials Of Management, Koontz &Weihrich ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Business Correspondence & Report Writing, R.C. Sharma And K.Mohan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , How To Prepare For Group Discussion & Interview (With Audio Cassette), Prasad ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Construction Management And Planning, Sengupta.B, &H.Guha ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Applications In Construction, Boyd.C. & Paulson Jr ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Fluid Mechanics And Machinery, B C S Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Geotechnical Earthquakes Engineering Hand Book,,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials, S.S.Rattan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials,B K Sarkar ,Tata Mcgraw-Hill Publishing Company Ltd , I Edition, 2003 , Production Technology,,Tata Mcgraw-Hill Publishing Company Ltd ,Edn. 18. 2001 , Autocad With Applications, Sham Tickoo,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynami, Pk Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , Production Technology, Hmt, ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 18 , Manufacturing Process, Myro N Begman ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 5 , Production Processes, Nitttr, ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Circuits & System- Analog And Digital , Y.N.Bapat ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynamics, P.K. Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Ndedition , Quality Management, Howard Cuitlow ,Tata Mcgraw-Hill Publishing Company Ltd , 1998 , Quality Planning And Analysis, Juran J.M And Frank M.Gryna Jr. ,Tata Mcgraw-Hill Publishing Company Ltd , 1982 , Tool Design, Donaldson ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Non-Conventional Energy Resources ,B.H.Khan ,Tata Mcgraw-Hill Publishing Company Ltd ,2Nd Edn, 2009. , Cad/Cam Principles And Applications, Dr.P.N.Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cad/Cam, Ibrahim Zeid ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Measurement Systems, E. O. Doebelin ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Robotics And Image Processing, Janakiraman.P.A ,Tata Mcgraw-Hill Publishing Company Ltd , 1995 , Circuits And Networks Analysis And Synthesis., A. Sudhakar Shyammohan S Palli ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electric Circuits, Mahamood Nahvi Joseph A Edminister ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Nagarath ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Bhattacharya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Jacob Millman And Halkias ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Optical Fiber Communication, Gerdkeise ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Instrumentation, Hs Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P.Jains ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles & Applications, Albert Paul Malvino & Donaldp.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Introduction To Microprocessor, Aditya P Mathur ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Power System Protection And Switchgear, B Ram & Dn Viswakarma ,Tata Mcgraw-Hill Publishing Company Ltd , Reprint 2000 , Programmable Logic Controllers, Frank D.Petruzella ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Power Distribution System, As Pabla ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Utilization Of Electric Power, Nv Suryanarayana ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Troubleshooting, Maintaining And Repairing Pcs, Stephen J Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , 2006 , Computer Networks, Achyut Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices And Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2016 , Electronic Principles , Malvino ,Tata Mcgraw-Hill Publishing Company Ltd , 2010 , Electronicsdevices And Circuits, Jacobmillmanandhalkias ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2010 , Electronic Instrumentation, Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Programming In Ansi C , E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Programming And Problem Solving Using C, Isrd Group, Lucknow ,Tata Mcgraw-Hill Publishing Company Ltd , 2008 , Electronic Communication Systems, Kennedy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, Arvind M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Communication Electronics Principles And Application , Louis E Frenzel ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles And Applications, Albert Paul Malvino & Donald P.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Linear Integrated Circuits, Salivahanan & V.S.Kanchana Baskaran ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Communication Systems, Kennedy – Davis ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Communication, P.Ramakrishna Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Principles Of Communications System, Taub &Schilling ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Tata Mcgraw-Hill Publishing Company Ltd , Second Edition 2010 , Troubleshooting, Maintaining And Repairing Pcs, Stephen J.Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , Fifth Edition , Ibm Pc And Clones, B.Govindrajalu ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, By A.M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Color Tv, Theory And Practice, S.P.Bali ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P. Jain ,Tata Mcgraw-Hill Publishing Company Ltd , Third Reprint 2010 , Basic Electricall Engineering, V.N.Mittle ,Tata Mcgraw-Hill Publishing Company Ltd , First Edition , Basic Electrical And Electronics Engineering, R,Muthusubramanian R.Salivajanan ,Tata Mcgraw-Hill Publishing Company Ltd , Seventh Reprint 2011 , Computer Architecture And Organization, John P. Hayes ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Data Communication And Networking, Behrouz A.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Computer Communications And Networks, Achyuts.Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cryptography And Network Security, Behrouza.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Programming With Java, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Data Structures And Algorithms, G.A.Vijayalakshm I Pai ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Reprint Or Latest Reprint , Data Structures Using C, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Programming In C#, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Applications Of .Net Technology, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , 1St Edition Or Latest Reprint , Cloud Computing A Practical Approach 2008 Edition, Cloud Computing A Practical Approach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Software Engineering, Stephen Schach ,Tata Mcgraw-Hill Publishing Company Ltd , Eight Reprint 2011 , Mobile Computing, Asoke K Talukder,Hasan Ahmed, Roopa R Yavagal ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Multimedia: Making It Work., Tay Vaughan ,Tata Mcgraw-Hill Publishing Company Ltd , 8Th Edition , Multimedia Communication Systems: Techniques, Standards, And Networks, K.R. Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Principles Of Multimedia, Ranjan Parekh ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , The Complete Reference Linux, Richard Peterson ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Edition , A Text Book Of Engineering Drawing,R.B. Gupta ,Technical India Publications, New Delhi , Latest Edition , Digital Communication, Dr. J.S.Chitode ,Technical Publications – Pune , Latest Edition , Introduction To Plc, Gary Dunning ,Thomson Del Mar Learning , 3Rd Edition , Data Structures Using C – 1000 Problems And Solutions, Sudipta Mukherjee ,Tmgh, New Delhi , 2Nd Reprint Or Latest Reprint , Industrial & Power Electronics, Harish C.Rai ,Umesh Publications , 2017 , Construction Engineering & Management, Seetharaman. S ,Umesh Publications , Latest Edition , Introduction To Earthquake Engineering,,University Of Tokyo Press , Latest Edition , Digital Electronics And Logic Design, Jaydeep Chakravarthy ,University Press, Hyderabad , First Edition2012 , Introduction To Data Structures Using C, Venkatesh N.Baitipuli ,University Science Press, Chennai , 1St Edition, 2009 Or Latest Reprint , Software Engineering, Rohit Khurana ,Vikas Publishing Ltd , Second Edition , Organizational Behaviours, S.Chandran ,Vikas Publishing Ltd , Latest Edition , Operating Systems, Rohit Khurana ,Vikas Publishing Ltd , 2Nd Edition , Workshop Technology, Waj Chapman ,Vima Books Pvt. Ltd New Delhi , Latest Edition , Energy Auditing In Electrical Utilities, Rajiv Shankar ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Workshop Tech Vol I,Ii, Iii, Waj. Chapman ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Wireless And Mobile Network Architectures, Yi-Binglin, Imrich Chlamtac ,Wiley , Latest Edition , Wireless Networks, P. Nicopolitidis ,Wiley , Latest Edition , Operating System Concepts, Abraham Siberschatz, Galvin, Gagne ,Wiley , 9Th Edition , Microprocessor Architecture Programming And Application, Ramesh S. Gaonkar, ,Wiley Eastern Ltd , Latest Edition , Introduction To System Design Using Ic, B.S. Sonde ,Wiley Eastern Ltd , Latest Edition , Fundamentals Of Acoustics, Kingsler And Frey,Wiley Eastern Ltd , Latest Edition , Beginning Android 4 Application Development, Wei-Meng Lee ,Wiley India Edition , Latest Edition , Power Electronics, Mohan, Undeland, Robbins. ,Wiley India Edition. , Media Enhanced Third Edition , Web Programming, Chris Bates ,Wiley India, New Delhi, 3Rd Edition , Cloud Security: A Comprehensive Guide To Secure Cloud Computing, Ronald L. Krutz Russell Dean Vines ,Wiley Publishing, Inc , Latest Edition , Cloud Computing Bible, Barrie Sosinsky ,Wiley Publishing, Inc. , Latest Edition , Total Quality Management For Engineers, Zeiri ,Wood Head Publishers , 1991 , Mechanics Of Structures- Vol 1, S.B.Junnarkar , , Latest Edition , I S 2185 Part I & Ii, Ernest O. Doebelin , , Latest Edition , Pwd & Cpwd Specifications, D.V.S.Murty , , Latest Edition , National Building Code,, , Nbc-2012 , Tamilnadu District Municipal Building Rules And By-Laws,, , Latest Edition , Civil Engineering Drawing And House Planning, B.P. Verma , , Latest Edition , Building Planning And Drawings, Dr N. Kumaraswamy And A. Kameswara Rao , , Latest Edition , Building Planning And Construction, G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , , Latest Edition , Civil Engineering Drawing, S.C.Rangwala , , Latest Edition , A Guide To Civil Engineering Drawing, V.R.Thothathri , , Latest Edition , Theory Of Structures, S. Ramamrutham , , Latest Edition , Analysis Of Structures, V.N. Vazirani & M.M. Ratwani , , Latest Edition , Elementary Theory Of Structures, R.L. Jindal , , Latest Edition , Strength Of Materials, Fv. Warnock , , Latest Edition , Estimating & Costing, Bridie , , Latest Edition , Indian Standard Code Of Practice, Is:1200,, , Latest Edition , I S 456-2000 ; I S 875-1987; I S 800 -2007,, , Latest Edition , Explanatory Hand Book Sp24, Design Aid Sp 16,Detailing Of Reinforcement,Sp 34,, , Latest Edition , Concrete Technology , M.S. Shetty , , Latest Edition , Fire Resistant Construction – Building Construction, S.P.Arora And S.P.Bindra , , Second Edition , Earth Quake Proof , Dr.Janardhanjha And Prof.Suresh Kumar , , Latest Edition , Sinha Is Code Of Practice For Earth Quake , Is Code Of Practice For Fire Resistance, Is Code Of Practice For Pre Stressing,, , Latest Edition , Pile Foundation, Rd Chellis, Mis , , Latest Edition , Construction And Foundation Engineering, Sinha & Janatha Shau , , Latest Edition , Principle Fine Safety Standards For Building Construction, M.Ya Roytman , , Second Edition , Remote Sensing And Geographical Information Systems, Anji Reddy.M. (1998) , , Latest Edition , Analysis And Design Of Substructures (Lsd) – Second Edition 2010, Swami Saran , , Latest Edition , Civil Engineering Drawing, M Chakrabort , , Latest Edition , Civil Engineering Drawing, Gurucharan Singh & Subhash Chandar Sharma , , Latest Edition , Civil Engineering Drawing Manual, S Chand & Company (Pvt) Ltd. , , Latest Edition , Production Systems: Planning, Analysis And Control, J.L.Riggs, 3Rd Ed , , Latest Edition , Productions And Operations Management, A.Muhlemann, J.Oakland And K.Lockyer, Macmillan , , Latest Edition , Operations Research, J.K.Sharma, Macmillan , , Latest Edition , Spoken English – A Self-Learning Guide To Conversation Practice (With Cassette),, , Latest Edition , Quality Control And Applications, Housen&Ghose , , Latest Edition , Industrial Engineering Management, O.P. Khanna , , Latest Edition , Steel Structures, Dr.Subramaniam , , Latest Edition , Town Planning, S.C. Rangwala , , Latest Edition , Town Planning, K.S.Rangwala And P.S.Rangwala , , Latest Edition , Remote Sensing Methods And Application, Michael Hord, R , , Latest Edition , National Building Code Of India- Part-Iii.(2005),, , Latest Edition , Municipal And Panchayat Bye-Laws, Cmda Rules And Corporation Bye-Laws.,, , Latest Edition , Urban And Regional Planning, Ka. Ramegowda , , Latest Edition , Earthquake Resistant Design Of Structures, Pankaj Agarwal And Manish Shrikhande , , Latest Edition , Guidelines For Earthquake Resistant Non Engineered Construction, The Associated Cement Companies Ltd , , Latest Edition , Criteria For Earthquake Resistant Design Of Structures - General Provisions And Buildings, Is: 1893 ( Part 1 ) - 2002,, , Latest Edition , Code Of Practice For Ductile Detailing Of Rc Structures Subjected To Seismic Forces, Is:13920-1993.,, , Latest Edition , Earthquake Tips, C.V.R.Murty, , , Latest Edition , Indian Standard Code Of Practice, Is:1200.,, , Latest Edition , Estimating And Costing, Vazirani & Chandolu , , Latest Edition , Geometrical And Machine Drawing, N.D. Bhatt, Anand , , Latest Edition , Hydraulics, Andrew Parr , , Latest Edition , Fundamentals Of Pneumatic Control Engineering, Festo Manual , , Latest Edition , Electrical Technology, Hughes, , 8Th Edition , Machine Design Bandari,,, , Latest Edition , Industrial Engineering & Management, O.P Khanna , , Latest Edition , Industrial Engineering & Production Management, Martand Telsang , , Latest Edition , Production Engineering , P.C.Shrma. , , Latest Edition , Production And Costing, Gbs Narang And V.Kumar , , Latest Edition , Mechanical Estimating And Costing , Banga & Sharma. , , Latest Edition , Quality Auditing, D.Mills, Chapman And Hall , , 1993 , Refrigeration And Air Conditioning, V.K. Jain, , , Latest Edition , Industrial Refrigeration Hand Book, Wilbert F. Steocker , , Latest Edition , A Course In Refrigeration And Air Conditioning , Domkundwar , , Latest Edition , Principles Of Refrigeration, Dossat, , Latest Edition , Electronic Principles , Malvino , , Latest Edition , Microcontrollers, Principles And Applications – Ajit Pal – Phi Ltd., - 2011.,, , Latest Edition , Biomedical Instrumentation ,Anuradha Publications, Chennai, Dr.M. Arumugam , , Latest Edition , Bio Medical Instrumentation And Measurements, Ii Edition., Leslie Cromwell –Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering., Jacobson And Webstar , , Latest Edition , Hand Book Of Bio –Medical Instrumentation., R.S .Khandpur , , Latest Edition , Medical Electronics, Kumara Doss , , Latest Edition , Introduction To Medical Electronics, B.R. Klin , , Latest Edition , Introduction To Biomedical Instrumentation , Mandeep Singh Printice Hall India 2010. , , Latest Edition , Digital Communications, John G.Prokais , , 2011 , Biomedical Instrumentation And Measurements, Leslie Cromwell, Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering, Jacobson And Webstar , , Latest Edition , Hand Book Of Bio–Medical Instrumentation., R.S .Khandpur , , Latest Edition , Engineering Mathematics - Dr.M.K.Venkatraman, National Publishing Co, Chennai 2. , Engineering Mathematics – Dr.P.Kandasamy & Others, S.Chand & Co Ltd, New Delhi , Physics, Resnick And Haliday–Wisley Toppan Publishers–England , Engineering Physics–B.L.Theraja–S. Chand Publishers , A Text Book Of Sound–R.L. Saighal & H.R. Sarna–S.Chand & Co. , Mechanics–Narayana Kurup–S. Chand Publishers. , Fundamentals Of Physics – Brijlal And Subramaniam. , Fundamentals Of Electricity – D.N. Vasudeva – S. Chand & Co , Non-Conventional Energy Sources – G.D. Rai.- Khanna Publishers , Text Book Of Remote Sensing And Geographical Information Systems – M. Anji Reddy Bs Publications. , Engineering Chemistry – Jain & Jain – Dhanpat Rai & Sons. , A Text Book Of Engineering Chemistry – S.S. Dara – S. Chand Publication. , A Text Book Of Environmental Chemistry And Pollution Control – S.S. Dara – S. Chand Publication. , Engineering Chemistry – Uppal – Khanna Publishers. , Environmental Chemistry – V P Kudesia – Pragati Publishers. , Chemistry Of Engineering Material – C.V. Agarwal, Andranaidu C. Parameswara Moorthy – B.S. Publications. , A Text Book Of Inorganic Chemistry – P.L. Soni – S. Chand Publication. , Rain Water Harvesting – Hand Book – Chennai Metro Water. , Bhatt N.D. And Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50Th Edition, 2010. , Gill P.S., “Engineering Drawing”, S.K.Kataria & Sons. , Gopalakrishnan.K.R., Engineering Drawing, (Vol.I And Vol.Ii), Dhanalakshmi Publishers, Edition 2 , Venugopal.K, Sreekanjana G, “Engineering Graphics” New Age International Publishers. , K V Nataraajan “A Text Book Of Engineering Drawing” , Besant Agrawal, C M Agrawal “Engineering Drawing”, Tata Mcgraw Hill Education Private Limited. , Barkinson & Sinha, First Year Engineering Drawing, Pitman Publishers. , Communication Skill, Sanjay Kumar Pushp Lata, Oxford University Press , Communication Skill, , Gph Publication , English Communication Teory And Practical, Manoj Kumar Garg, Scholar Tech Press , Little Redbook - Grammar Made Easy, Terry O Brien
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
10.
Educational and Research Institute #9827056 Technical Bid
Tender for To Carry Out The Detailed Energy Audit, Electrical Safety Audit, Power Quality Audit & Solar Power Plant Audit Etc., At Sant Gadge Baba Amravati University Campus, Amravati, As Per The Given Scope Of Work
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Maharashtra View Result →
11.
Housing Urban and Rular Development #9578300 AOC
Tender for M & R To Water Supply Scheme At Ransai...Enhancement Of Power Quality By Conducting Electrical Energy Audit At Ransai Water Works
Contract Date: Feb 13, 2026 Contract Value : ₹ 5.47 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
12.
Defence #9545191 AOC
Tender For Provision Of Solar Power Plant At Sevoke Mil Station Under Ge Sevoke Road.; 2 Design, procurement, erection, installation, testing and commisioning including connecting to local utility grid; Grid connected solar photovoltaic plant 0.8 MW output peak capacity with net billing arrangement including Solar Photovoltaic Modules,DC Cabling, Module Mounting Structures (suitable for ground mountingwith and including Soil Investigation as per OEM recommendation, RCC foundation framed structure and other connected civil work duly vetted by IIT / NIT), Array Combining Boxes, ACDB, DCDB, Lightining Protection of SPV modules and other accessories, String Inverter as Power Conditioning Unit, Weather Station and Data Monitoring system (SCADA) all as per detailed specifications given in tender documents, latest MNRE/SECI/NISE/IREDA guidelines and directions, meeting the Make in India (DCR), consisting of all requisite accessories (BOS-Balance of system) and including the following main components (NOTE : The work shall be executed directly by OEM only through contractor.) Item Continued as 1.01 to 1.45 3 (A) Photo Voltaic Module: Mono-crystalline Silicon Bifacial Solar Photovoltaic Modules of minimum 550 Wp(module power and number of modules to be selected according to available area), having cell efficiency more than 20% under standard conditions, form fill factor more than 0.76, plant performance ratio > 75%, made of high transmitivity glass front surface and it shall give high encapsulation gain (transmittance above 90% and bending less than 0.3%). The modules shall have the following features :(a) The electrical parameters of SPV modules under standard test condition of irradiance 1000W/sqm, AM 1.5 Spectrum and temp 25 degree Celsius shall be as under : (i) Max Peak Power Pmax : 550 Wp or more (ii) Voltage at Max Power : > 40 V (iii) Current at Pmax :> 10A 4 (iv) Short Circuit Current :> 12A (v) Open Circuit Voltage :> 47 V (vi) Module Efficiency : > 20%(b) Rated output of the modules shall have positive tolerance of 3-5% and no negative tolerance is allowed.(c) It shall perform satisfactorily in RH 85% with temperature up to +85 degree C and should withstand wind of 200 kmph on the surface of panel.(d) PV modules shall be warranted for their output peak watt capacity, and it shall not fall of its initialvalue below 90% in first 10 year end and 80% after the end of 25 years.(e) Each module shall have RFID tag encapsulated with solar cell bearing following details (i) Name of Manufacturer of SPV Module (ii) Name of Manufacturer of Solar Cell 5 (iii) Month and year of Manufacturing (separately for cell and module) (iv) Country of Origin (both cell and module) (v) Peak wattage, Im, Vm and fill factor of the module (vi) Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate. (vii) Unique serial no of model no of module (viii) IV curve of module(ix) Other relevant information on traceability of solar cells & modules(f) The temperature coefficient of power for the module shall not be more than 0.50% per degree Celsius.(g) The module must have bypass diode of suitable capacity.(h) PV module must confirm to latest edition of IEC 61215/ IS 14286. In addition the modules must confirm to IEC 61730 Part I and II for construction and testing & safety qualifications and confirming to IEC 62804 PID.(j) It shall also be in conformity to latest minimum technical specification issued by MNRE/IREDA/SECI/NISE/ALMM from time to time. Modules should be of MNRE/IREDA/SECI/NISE/ALMM approved companies and as per latest IEC/IS standards. 6 (k) RFID reader is to be provided by contractor(l) Both PV cells and SPV modules shall be made in India (DCR).(m) Each structure should have angle of inclination as per the site conditions to generate maximum power. However, to accommodate more capacity the angle inclination may be reduced to 10 - 13 Degree until the plant meets the specified performance ratio requirements.(n) Fire Points with Fire extinguisher liquefied CO2 gas of capacity 10 kg and adequate qty confirming to relevant IS or ISI mark complete as recommended by manufacturer deemed to be included in the unit rate quoted.(o) Danger Board and Rubber mat as recommended by manufacturer deemed to be included in the unit rate quoted.(p) S&F Pressure Booster pump electrically operated with minimum 3 HP 02 Nos (Running+ standby) three Phase AC Supply motor and having head not less than 20 mtr, including PCC foundation civil wokrs and necessary cable required for connection in drawn in PVC conduit heavy duty/ DWC/Electrode pipe from existing nearest point to the motor starter panel including motor starter suitable capacity,PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 63 mm/50 mm/32 mm/25 mm inner dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brass threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches with necessary exavation, removing and returning filling work and including all accessories from the new PVC tank cap 10000 Ltrs install at proposed site for cleaning of entire solar power plant system.(q) SPV Panel is to be fixed in such a way that lower portion of the Panel remains atleast above 1.5 mtr of finished reflecting surface and cost deemed to be included in the quoted rates. 7 (B) Junction Boxes: Junction boxes of suitable Nos (as per design)/OEM recommendations inputs and suitably rated out put having separate DCfuses for both (+)&(-) on input and isolator on output terminal for each string.Each junction box must have as pare input terminal.The junction boxes shall be dust and vermin proof and water proof made of FRP/ Thermo Plast with IP 65 protection in compliance with IEC 62208 and shall be UV resistant, fire retardant. It shall have surge protection and maintenance free earthing as per relevant standard. The junction box shall have suitable arrangement of the following: (a) The strings are required to be connected to the copper bus bar through individual fuses. (b) Provide arrangement for disconnection (DC dis-connection switch) for each SJB/ SCB. (c) To provide a test point for each sub group for quick fault location and to provide group array isolation. (d) Each array box shall be of relevant IEC standard. (e) Each array junction box shall have suitable bypass & reverse blocking diodes for minimum DC blocking voltage of 1000V with suitable arrangement of its connection. Reverse blocking and bypass diodes shall work for extreme temperatures and shall have efficiency of 99.98% confirmed by appropriate IEC standard. 8 (C) DC Cables: Suitable size of XLPE insulated tinned Copper cable (min 10 sqmm) of solar grade, 1100 Volts and UV resistant for outdoor installations confirming to IEC : 60227/15694 & 60502/ IS : 1554 (Pt I&II)) and shall be as under : (a) All cables and connectors must be as per IS/IEC standards and shall be able to withstand harsh environmental conditions including high temperature, UV radiations, rain, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/IS. (b) All the cables / wires shall be provided with UV resistant printed ferrules for DC wires. (c) The size of the cable shall be such that average voltage drop at full power from PV module to inverter shall be less than 1.5%. (d) Cable batch No., Drum No, IS code and size and make shall be mentioned on every one meter or as per OEM practice. (e) The wiring of the module interconnection shall be in UPVC/HDPE pipe of suitable size. (f) The cost of interconnecting DC Copper cable, MS cable trays, MS cable trays suitable to accommodate Solar grade cables from SPV module to inverter are included in the item. 9 (g) Boring of holes under road, pavement, hard standing by trenchless technology (HDD) GI protection pipe up to 100 mm bore (dia), maximum 2.5 metre below of apron areain ant type of soilcomplete.Note : (i) All the precaution to be taken by the contractor before drilling the bore. The contractor has to take plan of existing cables any type and pipe line in existing area before drilling the bore. (ii) Any damage to existing cables any type and pipe line in the way of drilling the bore will be repaired and make good by the contractor within 24 hours. No extra cost will be paid in this account. (iii) Contractor has to get the survey of route, length and depth for boring before quoting the rate. (iv) Connected items like HDPE/PPR/DWCPE pipes, exavation, removing, return filing, channel, any type of metal work is not measured and paid separately under relevant items.(D) Module Mounting Structure (MMS) (Suitable for ground mounting on any type of soil condition) :Design, procure, fixing, support structure made of hot dipped galvanised steel with min 85 micron thickness including necessary PCC / RCC foundation and associated work (cutting, grounding, PCC filling, disposing waste material,etc., complete) and fixing mounting arrangement suitable for SPV modules so as it can with stand wind speed of 170 km per hour & minimum yield strength off 250 MPa. The mounting structure is to be installed on ground. Mounting structures to be so designed that maximum load is directly on ground. It shall also observe minimum space without sacrificing the out put of SPV panels & adequate spacing between the arrays shall be available for easy cleaning and maintenance. Nuts, bolts, protected from the atmosphere and weather mounting structure shall have to be adequately of Stainless Steel of grade SS316. 10 NOTES :- (a) Two numbers of anti theft fasteners of Stainless Steel on two diagonally opposite corners of each module shall be provided. (b) Module mounting structure shall be fitted to provide maximum generation. (c) MMS design shall be supported with Staddpro Report vetted by Third Party (Gov Institute) and submitted for the approval of the Accepting Officer. (d) The height of approved design MMS for solar power plant shall be as per latest MNRE/IREDA/SECI/ NISE guidelines. (e)Minimum grade of RCC M-25, design mix (using 20mm graded crushed stone aggregate includingTMT bar as per design, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and other connected works as per design and OEM recommendation. Civil work shall be designed through approved consultant of MES as per latest MNRE/IREDA/SECI/ NISE guidelines and vetted by IIT / NIT.(E) Lightning Protection forentire Solar Power Plant (i.e PV Array, Inverter etc) : Design, procure and fix lighting arrestor system confirming toIS/ IEC-62305(Part1-4)on the ground. The air terminal shall be fixed at the top of MS pole with base so as to beat least two meter above the pole to be protected. Its height above 9 mtr level shall be depend upon the level of protection and protection radii required. 11 NOTES :-(i) The cost of all equipments, MS Pole, Copper strip upto earth test point,LA, etc., shall be deemed to be included in this item. (ii) The cost of sufficient earthing for lightning protection is also included in this item to be provided by Engr-in-charge. and no extra payment will be made to the contractor on this account (iii) The complete system shall include chemical earthing (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes and for LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines.No separate cost of the same is included in the schedule and amount will be paid to the contractor on this account. In case of any dispute, decision of Engr in charge will be final, conclusive and binding to contractor. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474). Earth resistance shall not be more than 3 Ohms. (iv)Separate LA arrangement & the design document of the same shall also be submitted. (v) The protection against induced high voltage shall be provided by the use of metal oxide varistors and suitable earthing such that induced transient find and alternate route to earth. (vI) SPV Power Plant shall be provided with lightening and over voltage protection. (vii) Internal surge protection shall consist of three MOV type surge-arrestors connected from +ve abd +ve terminals to earth (via Y arrangement) 12 (F)Power Conditioning Unit: Procure, fixing, testing and commissioning of minimum 4 (Four) unitswith overall not less than 800 KW output on 11 KV AC supply, Solar-power inverter suitable for without DC power of Solar PV module/ array with AC output further feeding to grid confirming to IEC:61683 for efficiency, IEC:62109-1 or equivalent for safety and IEC:62093 for reliability. The input DC & output AC technical specification of Inverter are as under :Input (DC) (a) Max Absolute DC input Voltage : 1000 V (b) Start-up DC input voltage : 200 - 500 V (Default 420V) (c) Operating input DC voltage range : 200 - 1000 V (d) No of independent MPPT : One (e) MPPT input DC voltage range at Pacr : 180 - 1000 V DC (f) Max input DC Current : As per design. (g) AC grid connection type : 3Phase (4W + PE) (h) AC output power : As per design. (j) Max AC output Apperant power : As per design. (k) Max AC output Current : As per design. (l) Max AC fault current : As per design. 13 (m) Nominal Output Voltage : 800 Volts AC 3phase or as per the design of Solar Stepup Transformer (n) Output voltage range :± 10% (o) Output Frequency : 50 Hz ± 3Hz (p) Power factor : > 0.99 (q) Harmonic Distortion Current : < 3% (r) Efficiency : > 98% (s) Standby operation consumption : < 1.5 W(t) Operating temperature upto 85 degree centigrade (u) The Copper based inverter shall have minimum IP-67 protection, ground fault monitoring, reverse polarity protection, anti-islanding, DC reverse polarity, AC and DC short circuit current and over current, AC and DC over voltage and over temperature. 14 (v) The inverter shall adjust voltage and frequency levels to suit the grid. (w) The inverter shall be self commulated with Pulse Width Modulation (PWM) technology and shall be capable of synchronise maximum with in one min. (x) Maximum Power Point Tracker (MPPT) confirming to IEC 62093 shall be integrated in the inverter to maximise the energy drawn from the PV array (y) Monolithic design of inverter is not permitted. (z) Shall have anti-Islanding features. (aa) The inverter shall have suitble nos of protected inputs (asper design) and outgoing shall be protected by ACB/MCCB. (ab) The inverter should have MODBUS, PROFIBUS, ETHERNET common ports. (ac)The inverte rshall include appropriate self protection and self diagnostic features to protect itself and the PV array fromthedamageintheeventof invertercomponent failureor fromparametersbeyondtheinverterssafeoperatingduetointernaland/orexternalcauses. Invertershallhaveprotectionarrangementagainst ground leakage faults, over voltage, (SPD) & over current. Inverter shall have arrangement for adjustment for adjusting DC input current and shall trip against sustainable fault down stream and shall not restart till fault is rectified. (ad) The inverter should have provisions of Galvanic isolation, anti-islanding protection (IEEE 1547/UL 1741) equivalent IS and lightening. (ae) PCU must have the feature to work in tandem with other similar PCUs and be able to be successively switched ON and OFF automatically based on solar radiation variations during the day. (af) Minimum Warranty of Inverter- 12(Twelve) Years and defect liability period deemed to amended accordingly for the said item. 15 (G)ACDB : Outdoor type powder coated weather proof,vermin proof made out of CRCA sheet front open able door, lockingarrangement, including suitable working space in DCDB busbar chamber, cable box chamber including Copper busbar of designed capacity /bus raisers suitable capacities with PVC sleeves/tape RYB colour for phases identification, including all bus raiser shall be extend upto cable box chamber fixed on fibre insulation for RYB & neutral to all out going cable, confirming to IP-65 and fixed on wall / floor with control wiring with comprising cable gland brass, copper lugs etc. and comprising the following as per design :- (i) MCCB 4Pmicroprocessor based for outgoing (ii) MCCB 4Pmicroprocessor based for incoming (iii) AC type 2 Surge Protection Device (iv) Spreader Terminals as per requirement (v) Multifunction meter (vi) CT of suitable ratio(vii) Copper busbar chamber (ix) The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 16 (H) DCDB:- Outdoor type powder coated, weather proof, dust proof,vermin proof made out in CRCA sheet front open able door, looking arrangement, including suitable working space in DCDB busbar chamber,cable box chamber including copper bus raisers with PVC sleeves/ tape RYB coloursfor phase identification, including all bus raiser shall be extend upto cable box chamber, confirming to IP-65 and fixed on wall /floor with contral wiring with comprising cable gland brass, copper lugs etc. (i) MCCB as per requirement (ii) Fuse as per requirement (iii) Copper busbar chamber. (I) Weather Monitoring System Pyranometer : The pyranometer (ISO 9060 classification ) alongwith necessary assessories for measuring incidental solar radiation at horizontal and inclined plane of array. Specifications of the pyranometer shall be as follows :- (i) Spectral response : 031 to 2.8 micron,(ii) Time response (95%). Max 15 second 17 (iii)Nonlinearity + 0.5% (iv) Temperature response : - 2%(v) Tilt error <+/- 0.5% (vi)Zero offset themal radiation +7W/Sqm (vii) Zero offset temperature change + 2 W/Sqm(viii) Operating temperature range - O °C to 80°C(ix) Non stabillity Maximum - 0.8%,(x) Resolution minimum +/-1 W/Sqm (xi)Output Analog 4.50mA (xii) Digital RS 485(xiii) The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 18 (J)Balance of System(BOS) Items/ Components:TheBOSitems/componentsof theSPVpowerplants/systems deployed under this project shall conform to the latest edition with certificate of IEC or equivalent BIS Standards/MNRE specifications/ as specified in Para 1.01 of Minimal Technical Requirements/ Standards for SPV System/Plants to be deployed during this financial year under the programmes of MNRE available on MNRE website as on last date of quoting of tender. Notes:(i) The contractor must visit the site before quoting the rates for this item to assess the site condition so as to decide up on location and layout of SPV, placement of inverter, length of DC cables, lightning arresters, etc., complete. (ii) The contractor shall submit complete scheme including electrical diagram of the work, schematic diagram, SPV module layout, placement of LAs, Civil work, etc., complete as per IREDA/ SECI/NISE/MNRE/ALMM latest guidelines as applicable, Relevant IEC/IS norms to the GE for approval with in one month of date of commencement of the work. (iii) The rate quoted is deemed to be inclusive of the all protection system including surge, lightning arresters and necessary earthing all as specified and directed. 19 (K) Remote monitoring system (SCADA) for solar power plant complete with all electronic andelectricial partswith andincluding all necessary software and hardware etc to make fully functional connected to LED monitor (55 inches) with complete plant parameters as required and operate the system from remote and Other Accessories includingandThe system will be controlled from the main control room where all the data from different parts of the plant shallbe received, analyzed and action taken either manually or on auto as per the system design by OEM . The SCADA shallhave remote monitoring capability comprising with the following Items and with and including all connectedaccessories as per OEM recommendation complete:(a) Main SCADA control wall mounting panel complete with fixing arragnment like nut bolt, washers suitable size and connected items. (b) LED Moniter (55. inches) with mouse, key board, CPU (Minimum 1 TB storage alongwith 12 GB RAM, i7 processor), key pad and single phaseUPS 10 KVA with 12 Volt battery, 14400 Ah battery bank with rack and required battery backup should not be less than 4 Hrs inside control room.(c)“SCADA System shall be audited for Cyber Security by CERT certified firms at the time of commissioning. Subsequent cyber security audit shall be carried out after every 03 years and cost of audit and rectification shall be born by the contractor” 20 The Contractor shall provide following defined user access levels, unless otherwise instructed by the Engineer-in-Charge: -• Normal viewing only (default level) The default level shallpermit users to view al displays except those specifically assigned to a higher level of access.• Dally Access The daily access level shall allow viewing (ie default an printing at trend displays.• Operator Level (Remote Control) The operator level shall permit authorised users to access lower levels a and to carry out the following actions:- Perform control actions Acknowledge alarmsEnter or modify manually-entered data for inclusion in thereports.• Monthly and Yearly Data Archiving The level shall permit authorised users to access lower levels and shall provide the facility to download specific data to long ten data storage for archive purposes(d)The SCADA software shall be of a proven design and reliable, and conforming to industrial standards and shall: -• Support multiple makes of RTU/ Microprocessor controller/ transmitters and models and provide required software features needed to easily adapt a device whichshall not be supported as standard to the SCADA system. 21 • RTU/ PLC/ Microprocessor base controllers and transmitters shall have an expandable architecture and scalability to provide future capacity increases in SCADA system as well as meet present needs of the administration, provide multi-level security and password mechanisms to prevent use of the system by unauthorised persons. The access privilege of authorised users shall be defined separately and permission shall be provided to the users only to access areas concerning them, provide an on-line operatingenvironment.• Adding a new RTUI Microprocessor based Controller to the SCADA system or changing configuration of the existing RTUs/ Microprocessor based controller shall not result in stopping or hinder working order of SCADA system.• The Contractor shall specify maximum number of data which shall be achieved by the system without any performance loss. The Contractor shall conduct necessary tests to prove maximum number of data points achieved. The Contractor shall also be responsible to create additional data points necessary for conducting such tests. Any AutoCAD graphics shall be able to be converted to process diagrams and shall be re-loaded and operated after completion of all works and during tests.(e)The Contractor shall hand over to MES the SCADA and application software (as CDs or DVDs) necessary for re-loading software to the system in case of failures The CDs or DVDs shall be provided after making the necessary tests. The operating system ofrouters and work stations shall be of an architecture that provides a multi-tasking operating environment, and SCADA software shall also be multi-tasking. Therefore multiple tasks such as receiving measurement results from devices, displaying these results on computer screen. storing on a computer disk, sensing alarm conditions that may occur based on measurement results, and displaying them to users, generating reports from collected data, and printing them cut, transferring issued commands to Microprocessor controllers/ RTUs/ PLC, that SCADA software is supposed to execute shall be handled simultaneously without one task waiting for another. 22 To configureSCADA software or to change the system configuration, definitions shall be either defined directly by using a keyboard or another interactive tool or mechanisms that allow importing of configuration definitions from a text file created with a text editor. The database configuration shall be provided by means of an interactive program that contains menus or similar approaches and shall be easy to use The database configuration definition program, when required, shall be capable of extracting definitions related to the configuration from information created in text format to use as definitions for configuration The following shall be possible online without interruption or hindering of usual operations: -•Adding an RTU to the SCADA system.•Deleting an RTU from the SCADA system•Changing configuration information related to an existing RTU definition.•Modifying definitions in database containing information about measurement and control points.•Creating screen pictures which offer operators to monitor and control the SCADA system.•Similar configuration changes. 23 (f)SCADA software shall be upgradeable to new versions with an automatic mechanism to be provided by the Contractor. The old version of software shall be overwritten by new version without resulting in a change in any of the definitions created in previous version, nor disturbing the operational logic defined in previous version. Al! text being available on the screen shall be in English language The database shall be configured on-line when the SCADA system shall be in operation. The changes on existing definitions or new definitions related to database shall be made when the data collection n and control functions are being performed. The SCADA Software shall be operated using the database that shall be resident in the memory(g)Data Exchange The control system shall provide a method of real-time data exchange with different application programs like Geo Information System (GIS). relational database, third party spreadsheet packages, report generation and graphical simulation packages.(h) Historical Data Management An historical data management (HDM) system shall be provided for archive, storage and retrieval of operational data comprising field input data, manually-entered data and calculated points Archived historical data shall minimally include averages, minima and maxima for each analogue value compiled over hourly. daily and monthly time periods, with a minimum capacity of 1o00 points. The HDM system shall be capable of selectively increasing the rate of data capture based on events, such as process variable status, discrete inputs, or operator command. Minimum and-maximum data shall include the time and date of occurrence. Gaps in collected data caused by faulty instruments or control system equipment shall not be included in average). minimum and maximum compilations. 24 (j) Report GenerationThe system shall be provided with a report generator utility which shall enable authorised users to create, delete or modify report definitions The report definitions shall allow for retrieval of data from on-line database and farm historical data files and for formatting data for output to printer. The format of each report shall be definable by user to include the definition of static or background data, placement of data base values, number of significant digits of a value, date and time of report and calculated values(k)Graphic Display GenerationThe system shall be provided with an interactive on-screen graphic generation utility which shall allow an authorised user to create new graphic displays and modify or delete existing displays at any work station including those associated with the LCP/ outstations. The generation utility shall include an interactive linkage process allowing user to link symbolic, numeric and bar graph representations and data entry locations to dynamic data base variables. The graphic display system shall be capable of making full use of the VDU resolution in the composition and display of graphic information. Graphic symbols shall be definable by the user for display of static and dynamic data. The user shall be able to as5emble a library of symbols which shall be retrievable into any graphic display. Text and symbols shall be able to be enlarged, shrunk, moved, mirrored or related with reference to a given display. The system shall be able to represent dynamic analogue data on a graphic display as a variable-length, sizeable bar graph, as well as numeric text. 25 (l)DisplaysGeneral all displays, excepting those containing data derived from historical files, shall be completely displayed within two seconds of the operators request. Dynamic data shall be continuously updated while being displayed. All screen displays shall provide following displays which shall be fixed in their locations to normal operations:• Alarm banner window at bottom of the screen display showing last three highestpriority unaccepted alarms. Where the system allows contents of banner to be limited (eg by user name or group) then the selection criteria applied shall be displayed with the banner.• Main display area for user selected displays e.g. mimics, alarm lists, etc.• System dialogue banner window at bottom of the screen shall display relevant system information such as error message and user prompts 26 •A day, date and time indicator shall be able to show local time an alarm bannerarea shall be included on all displays which provide information regarding most resentalarm events. The system shall allow operator to obtain details of most recent alarm event from any operational screen display through direct operation using a maximum oftwo keystrokes or selections. The system shall allow the operator to obtain a print of any display, including graphics through use of a standard system command. Screen displays shall appear identical incorporated form Dynamic data contained on a display shall not change during screen print Such that a snapshot of conditions is portrayed. Each display shall include time of day in hoursminutes and seconds and date in day, month and year format.•A facility shall be provided which allows paging to related displays through the use of ‘page forward or backward keys, or through the use of pick points(m) Suitable size of HT & LT XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts and 1100 Volts grade with stranded aluminium / copper conductor of size as per OEM recommendation and approved design ISI markedincluding cable glands, lugs, jointing kit etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories and necessary earthwork, civil work deemed to be included in quoted rates of the above items.(n)Generic Displays.The system shall produce various generic displays automatically 27 Metering arrangements: (A)Suitable bi-directional metering arrangements with recording facility shall be provided as per the norms of WBSEDCL. The metering arrangements must have feature to measure and record, (i)Parameters of KW, KWh, KVAR, voltage, current, PF and any other metering required to determine efficiency and efficacy of the system. (B) LT 3 Phase 4 Wire Electronic Tri vector Meter with CT ratioshould be as per capacity of SPV plant. (i) Standard: IS 13779:1999 / CBIP 88 (ii) Accuracy: Class 0.5 (ii) The metering arrangement shall have inbuilt Solar PV Plant synchronisation features. (iii) Reference Voltage - 3x240 V (iv) Basic Current (Ib)- 5 A (v) Maximum continuous current (Imax) - 10 A (vi) Rated Frequency (variation) - 50Hz (±5%) 28 (vii) Power consumption:- Voltage circuit: Less than 1.5 W and 10 VA per Phase at reference voltage, reference temperature and reference frequency Current circuit: Less than 1 VA per phase at basic current, reference frequency and reference temperature (viii) Display type: 8 digit 7 segment backlit LCD display, not less than10 mm character height (ix) Display in the event of Power Failure: Internal battery back-up for LCD display (x)Communication port: Galvanically isolated Optical Communication port for data transfer through either CMRI or remote device or both is providedwith RS 485 for DLMS protocol (C) CT/PT operatedenergy meter with following features (i) True four quadrant metering (iii) Time and day metering with maximum demand registration and automatic billing (iv) LCD display with announciators for various critical events (v) Scroll lock feature for continuous display of a desired parameter on display (vi) High resolution energy display mode for dial test (vii) DLMS protocol for meter reading, with option to remote reading port. 29 (viii) Advanced event detection features for voltage, current and magnetic influence (ix) Meter reading in absence of mains, using internal battery. (x)Power Manager Device Nano type with 4 inverter support with energy monitoring, zero export control, Load Management having RS-485 communication port, ethernet including RS 485 cable core size 0.5-1.5 Sqmm to establish communication between inverters, SCADA and sensor as per OEM recommendation with and including all connectedaccessoriesdeemed to be included quoted rates.(xi) Digital WIND SPEED SENSOR withminimum 3 cup Anemometer range 0 to 70 Mtr/ Sec distance constant 2.5 Mtrs output TTL Pulses output proportional to wind speed and diameter of cup 50mm with brass housing and stainless stell shaft(xii) WIND DIRECTIONSENSOR with wind vane and sensing vain coupledto linear endlsess potentio meter IP 67, range 0-357degrees, operating temperature -40 to +60 degrees celsiuswith brass housing and stainless stell shaft and aluminium vane complete 30 (xiii) AIR TEMPERATURE SENSOR withRTD sensing element PT100 mounted inside a weather shield duly coated with weather proof reflective white paint , range -40 degree to +60 degree celsius with nylon body housingwith weather shield and brass stem to mount the sensor, includingpower requirment 5 Volt DC complete. (xiv) MODULE TEMPERATURE SENSOR Model PT 1000 measuring range -40 Degreeto + 80 Degree Celcius with suitable ouput as required and directed on site and mounting on RTD encapsulated in suitable housing including connecting cables as required complete.(xv)Tipping Bucket Rain Gauge with Magnet and Red Switch type Sensing, rim diameter 203 mm and collecting are 335 MM SQ, Rain gauge shell made up of FRP bucket and mounting made up of stainless steel SS316 and unlimted capacity,including connecting cables as required complete.(xvi)SOLAR Radition Sensor ARN 8101 with 72 element thermo pile sensor and spectral range 0.3 to 3 Micro Mtrs and sensitivity 20 Micro Volt/ W/M², range 0 to 1500W/SQM & output 0 to 25 milli Volt and operating temp -10 to 70 Degree Celsiusincluding connecting cables as required complete with all fixing arrangment and necessary civil work complete with including all connectedaccessories as per OEM recommendation/Designcomplete: 31 (L)Step up solar transformer (800 volt/11 KV)” - Design,procure,erection, installation, testing and commisioning including connecting to local utility grid :Oil filled Type 3 phase, 50 Hz, ONAN cooling type, vector group of appropriatetype, number of load voltage Ratio: number of Phases / Freq.: 3 Phase / 50 Hz., Sealed type Copper wound Transformer with Off Load Tap Changing Arrangement on HV side in steps of 2.5% , +5% to -10% having cable end boxes on HV side suitable for 3 Crore X 300 Sq. mm. XLPE cable of 11 kV grade on HT side and LV side complete with all accessories like buchholz relay, Oil temperature indication, winding temperature indication and alarm etc preferbly DMCR Protection Relay i/c first filling of filtered dehydrated K Class natural Ester Oil bioTransol (as per IS 16659) and confirming to IS 1180 and losses shall be as energyefficiency Level 3 only & 100% load phase, with an impedence of 6.25% i/c as per specification below complete in all respects as required at site. Design ambient to be considered as 50 Deg C.All the balance parameter like temp rise, Basic insulation level, flux density etc shall be strictly in accordance with IS 1180 Part - 1 only including necessary earth work, PCC plinth foundation etc.Heat Run Test is the mandotary test for each Transformer.Standard: The equipment shall conform to the latest edition of applicable standards as follows. In case of conflict between applicable standards and this specification, this specification shall govern.• IS 2026 Standard for Oil filled Transformer• IS:3639 for Fittings and Accessories• IS:2099 for Bushings > 1000 V• IS:7421 for Bushings < 1000 V• IS:1271 for Electrical Insulation classified by Thermal stability• IEC 62770 Natural Ester Oil• CBIP Guidelines 32 (xvii) CORE : Transformer shall be double wound, core type with low loss, non-ageing, high permeability PRIMEGRADE, CRGO with M4 Grade or Better, perfectly insulated and clamped to minimize noise and vibrations. Followings should be Mandatory for any manufacturer: -(a) Transformer shall be of BOLTLESS core design.(b) Core shall be purchased Directly from Manufacturer or from their accreditedMarketingorganization of Repute & not through any agent. Bidder has to submit manufacturer’s name during bidding having sufficient credential & Core has to be purchased from the approved manufacturer.(c) Stage inspection of the core shall be done at manufacturer’s premises & inspection call shall be given with following Documents: (i) Invoice of the supplier (ii) Mill’s test certificate (iii) Packing list (iv) Bill of landing & Bill of Entry certificate by customs(d) Transformer manufacturer should have in-house core cutting facilities for proper control & monitoring of quality & to avoid mixing of Prime core with Second grade /defective core materials. Transformer Manufacturer should have in-house slitting Machine so that core is cut to width & stacked with minimum air gap thus ensuring Burr level less than 10Microns.(e) Core shall be procured from one of these reputed Manufacturers : Posco / Nippon/ Novex/ Ak Steels.(f) The insulation structure for the core to bolts and core to clamp plates shall be such as to withstand a voltage of 2000V for one minute. 33 (xviii)Tank:Tank should be of corrugated wall construction type. The exterior of tank and other steel surfaces exposed to the weather shall be thoroughly cleaned and have a priming coat of zinc chromate applied. The second coat shall be of an oil and weather-resistant nature, preferably of distinct colour from the prime and finish coats. The final coat shall be of a flossy, oil and weather resisting non-fading paint of specified shade. The interior of the tank shall be cleaned by shot blasting and painting with two coats of heat resistant and oil insoluble paint.Winding:(a) Winding shall be made with 99.9% pure electrolytic grade copper, insulated with thermally upgraded paper (Insulation Class A / Conductor Turn Insulation-Class E).The HV & LV winding should be able withstand thermal and mechanical stress in the event of short circuit.(b)Winding shall be carried in dust free area(c) The completed core and coil assembly shall be dried in vacuum and shall be immediately impregnated with oil after the drying process to ensure elimination of air and moisture within the insulation.Oil type: TransformerTransformer oil shall be as per IS-335:1993. It shall be natural/synthetic ester oil. The material safety Data Sheets (MSDS) for the Transformer oil shall be submitted by the bidder along with the offer Temperature Indicator:One set of winding temperature indicators with necessary current transformer, heating coil and a detector element and one set of oil temperature indicator with maximum reading pointer shall be mounted locally so as to be readable at a standing height from ground level. Each of the above indicators shall be provided with necessary contacts for alarm and trip: (a) Oil Insulation class : K class. It should also exhibit safety against fire hazards 34 (b) Cooling : ONAN(c) Vector Group: to be decided during design.(d) Percentage Impedance (Z%) 6.25 %.(e) Transformer Losses:as per IS 1180 - Level 1(2021)(f) Taps on HV for HV variation : +5 to -10 % in steps of 2.5% each (g) Termination (HV): Cable End box for11 KV cableof suitable size(h) Termination (LV): Cable connection(j) The transformer shall be supplied with following fittings:(k) Lifting lugs and Jack lifting pad support(l) Earthing terminals - to be decided during design. 35 (M)Earthing :The complete system shall include chemical earthing of required quantity for step-up Transformer (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes and for LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines.No separate cost of the same is included in the schedule and amount will be paid to the contractor on this account in case of any dispute decision of Engr in charge will be final and binding to contractor. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 36 IMPORTANT NOTE FOR SOLAR POWER PLANT CONTRACT (COST DEEMED TO BE INCLUDED IN QUOTED RATES :-(1) The item specification and details given are for guidance purposes only and are likely to vary with modified / higher specification than that specified in the BoQ based on detailed site survey, solar potential assessment, design approval etc keeping the quantity of Solar inverter (PCU) and Solar Transformer same as in the BoQ. The items as per the finalized and approved design and specification, including make, shall be provided by the contractor without any extra cost to the department. All makes should be as per the latest MNRE approved list of makes and models.2.Cost of preparation of DPR design vetting from NISE/MNRE approved Institute and net billing arrangement (as per WBSEDCL) is deemed to be included in the quoted rate.3.The contractor shall submit complete design of Solar power plant, Schemetic/line drawings, detailed mounting structure array layout drawings alongwith SBC report based on the soil investigation as per OEM recommendation, Single line diagram with and including project reportand connected document shall be submitted by OEM through contractor prior to commencement of the work for approval of Accepting officer and subject to the drawing and designduly vetted by IIT/NIT (for mounting structure only) and vetted by NISE/ SECIfor entire scheme of Solar Power GenerationProject including evacuation and Net Metering arrangement complete before recommendation by GE for approval of the accepting Officer. 37 (i) The scope of works involves engineering, procurement & construction (EPC) of entire Solar Power Plant of capacity 0.8 MWp.4. The entire work shall be executed directly by OEMonly through contractor and contractor has to submit the MoU with OEM (agreement period for 25 years of entire Solar Power Plant Project) prior to commencement of work and same shall be approved byGE. 5. Boring of holes under road, pavement, hard standing by trenchless technology (HDD) GI protection pipe up to 100 mm bore (dia), maximum 2.5 metre below of apron areain any type of soilcomplete.Note : (i) All the precaution to be taken by the contractor before drilling the bore. The contractor has to take plan of existing cables any type and pipe line in existing area before drilling the bore. (ii) Any damage to existing cables any type and pipe line in the way of drilling the bore have to berepaired and made good by the contractor within 24 hours. No extra cost will be paid in this account. (iii) Contractor has to get the survey of route, length and depth for boring before quoting the rate. (iv) Connected items like HDPE/PPR/DWCPE pipes for entire Solar Power Plant Project, exavation, removing, return filing, channel, any type of metal work is deemed to be included in the quoted rate. 38 6.Cost of comprehensive maintenance as per OEM recommendation alongwith cost of spare parts required during 5 years of defect liabilty period after completion of Ph-I is deemed to be included in the quoted rate.7. Bidders attention is drawn to pre-bid conferance with department and also visit the site prior to bidding and other factor required as per OEM recommendation deemed to be included in quoted rates.8. The contractor has to carryout Pre-commissioning test of solar power plant including stepup transformer by CEI/SEI. The necessary tools and plants required for inspection of the plant shall be arranged by the contractor.and costsare inclusive in quoted rates.9. Contractor needs to know the irradiance of the location at the project before quoting. The contractor will design DCR (Make in India) for entire Solar Power Plant according to irradiance of the project location and efficiency of the components to produce the desired peak value as mentioned in the schedule i.e. 800 KW output on 11 KV AC supply and inject to the proposed RMU 11 KV. 10. During the execution of work any type of damage by elephant or monkey manance, contractor is fully responsible for protection of all solar power plant equipments including connected items i.e. PV Module, Inverter etc. No claim will be sought from the department. 39 11. All SCADA related activities viz. cables till SMBS and inverter and the requisite software and hardwarefor control room shall be included in the quoted rate.12. Vegetation Growth should be controlled by use of Deweeding Chemicals deemed to be included in Quoted Rates.13. Adequate Water Storage Facility of capacity 10000 Ltrs PVC Tank 5 Layer (with guarantee of 10 years after physical completion of work) on PCC Platform including suitable foundation for cleaning of PV Modules and suitable water drainage facilitiesfor both (Rain Water and Cleaning Water) from proposed site to existing drainage chamber is deemed to be included in the quoted rate.14. Solar Transformer fed from the Inverter should not be having odd harmonics (certificate needs to be required before physical completion of work).15.The Shutdown duration of Inverter should be monitored and recorded and analyzed. 40 16. The SPV Power Plant will be capable of generating 800 kW AC Output atleast once in a year and the AC Output of the plant will be not less than 90% of initial output by the end of 10 yearsand not less than 80% of the initial output by the end of 25 years.17. The Contractor shall operate and maintain Fire Protection System and safety equipments for the entire Solar Power Plant for 10 Years and cost of the spare is deemed to be included in the quoted rates.18.The firefighting system for the proposed power plant for fire protection shall be consisting of:a) Portable fire extinguishers in the control room for fire caused by electrical short circuitsb) Sand buckets in the control roomc) The installation of Fire Extinguishers should conform to TAC regulations and BIS standards. The fire extinguishers shall be provided for control room housing, PV array installation.19.Solar Components shall not be connected to LAN, WAN, or any Internal Data/OPS nw. 41 20.Sys with Bluetooth, GSM, Wi-Fi, or any Telemetry features should be avoided, unless explicitly cleared monitored.21. Finalization Of Feasibility Report, Design, Engineering, Transportation, Storage, Insurance, Civil Works, Erection, Testing & Commissioning etc., ensuring net-billing as per state net billing policy, quality control of grid connected.22.The Comprehensive Maintenance of SPV Plant would include wear, tear, overhauling, machine breakdown, insurance and replacement of defective modules, Inverters/PCU, spares, consumables & other partsas pe OEM reocmmendation and specification for 5 (Five) years under DLP of Phase-I..23.The Contractor shall arrange technical vetting of the plant during execution by the Cyber/INT officer and training by Unit Technical Pers till defect liability stage of Phase-I. 42 24.a) An energy meter (for net-billing) shall be installed between the solar Grid-tied inverter and the building distribution board to measure gross solar AC energy production (the Solar Generation Meter). The Solar Generation Meter shall be of the same accuracy class as the DISCOM service connection meter or as specified by local regulatory requirements. Separate for two different buildings.b) The bidder must take approval/NOC from the Concerned DISCOM for the connectivity, technical feasibility, and synchronization of SPV plant (if required).c) Contractor shall be provided system software (Cloud) for data hosting of Solar Power Plant with the Government approved agency and also audited by CERT-In (Computer Emergency respose team-India) is deemed to be included in the quoted rates. 25.a) Two sets of Engineering, electrical drawings, and Installation and O&M manuals are to be supplied. Bidders shall provide complete technical datasheets for each equipment giving details of the specifications along with make/makes in their bid along with the basic design of the power plant and power evacuation, synchronization, along with protection equipment is deemed to be included in the quoted rates. 43 b) All test and calibration certificates, wherever applicable.26. The bidder shall take entire responsibility for the electrical safety of the installation(s) and personnel, including connectivity with the grid and follow all the safety rules & regulations applicable as per local guidelines and regulations, etc. Insurance of the installers (of the vendor) working abroad is mandatory.27. (a) The bidder shall take entire responsibility for the electrical safety of the installation(s) and personnel, including connectivity with the grid and follow all the safety rules & regulations applicable as per local guidelines and regulations, etc. Insurance of the installers (of the vendor) working abroad is mandatory.(b) The contractor will carry out fortnightly, monthly, quarterly and annual maintenance as per Proforma of Appendix here-in-after respectively. In case the contractor fails to carry out the above maintenance following penalty per Solar will be imposed. 44 (i) Not carrying out maintenance fortnightly- Rs 2500.00(ii) Not carrying out maintenance Monthly- Rs 5000.00(iii) Not carrying out maintenance quarterly- Rs 7000.00(iv) Not carrying out maintenance annually - Rs 10000.00(c) The Contractor shall be responsible for ensuring production of 800 kW AC output of electricity at the injection point of RMU atleast once in a year from the SPV plant. In case the output is less than 800 kW AC unit, it will be deemed as under-designed plant. The contractor will be responsible for making good the shortfall by repair / replacement of the SPV Plant free of cost. Delay in this regard will attract monetary penalty to be amounted for the period wef very next day of the completion of Phase-I to the date of completion of rectification / replacement by multiplying the maximum value of units less generated than 800 kW AC for every day with the prevailing rate of electricity tariff of WBSEDCL Rate of electricity in West Bengal is Rs 6.52 per unit as in Sep 2025.(d) Maintenance and supervision shall be done by trained men for the safe operation of Solar’s contractor shall carry out fortnightly servicing including adjustment lubrication, repair of replacement fo parts if necessary. In addition to fortnightly servicing contractor’s senior mechanic of foreman shall carryout the inspection as per maintenance schedule and make necessary entries in the proforma attached here-in-after duly signed by Contractor & Engg-in-Charge as applicable kept in the switch room for this purpose. It will be the responsibility of the contractor to see that the maintenance schedule book is maintained properly by their senior mechanic or foreman. They shall promptly attend and call back & shall not be kept pending for more than 4 hours unless it has the prior approval of the Garrison Engineer. 45 (e) For any repairs/ replacement of Solar the contractor shall always be aware of time factor following are the fixed time (including Sunday/Holiday) for repair/replacement of parts/components/ accessories which shall be adhered to :- (i) Minor repair/ replacement- 4 hours (ii) Major repair/ replacement - 1day(f) The decision of the GE regarding Minor/Major repair shall be final conclusive and binding. In case of failure on the part of the contractor to keep the solar’s in running condition within the stipulated period mentioned in above the contractor is to pay penalty charges as mentioned below subject maximum of 10% of the total contract value and after that measurement will not be considered for the same defective Solar till it is in satisfactory working condition :-(i)Upto 12 hours @ 2000/-(ii) Above 12 Hours and up to 24 hours @ 5000/-.28. RFID Tag scanner of reputed make shall be provided by the contractor is deemed to be included in the quoted rates.29. Existing Room at 33 KV Switch Yard shall be used for SCADA/ Solar equipment/Control Room. 46 30. Surface preparation and laying of light yellow/white coloured interlocking tiles of appropriate thickness under the whole area of PV module array to make a reflecting surface for bifacial Solar PV module alongwith periodical water sprinkling arrangement for cooling of interlocking tiles is deemed to be included in the quoted rates. 31.The complete system shall include chemical earthing (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes /LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines is deemed to be included in the quoted rates. Earth resistance shall not be more than 3 Ohms .32. The mounting steel structure shall be as per IS 2061-1992 and galvanizing as per IS 4759 and should withstand WIND Load as per relevant IS Code/NBC.33.Soil Stabliztion testing certificate needs to be required before completion of physical completion of work (Phase-I) so that the performance of the PV Plant is not affected in Highly Soiled areas for minimum 25 years. 47 34. M&O (Phase-II) should be finalize at the planning stage itself. The important point are as under:- (a) The thermal imaging of pv panel should be taken once a year for checking its health including hot spots.(b) The cleaning cycle of panel should be fixed as per the ratio of short circuit current falling below 0.9. The cleaning provision shoul be made available before evacuating the power.(c) The shutdown duration of inverter should be monitored and recorded and analyzed 48 Supplying, Installation, Testing & Commissioning including design, manufacture and testing at works of indoor type , IP 4X ,floor mounted metal clad, 11 KV VCB panel board totally enclosed & fully interlocked, Horizontal drawout, Horizontal isolation type breaker as per IEC-62271-100/200, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, motor charged and manually/electrically closing breaker suitable for use on 11 KV,3 Phase, 50Hz A.C. supply with STC 25 KA for 3 Sec.Internal Arc for AFLR 25kA at rated voltage for 0.1s at individual compartments i.e. Busbar, VCB and cable compartment.complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated and encapsulated copper bus bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 8 NO + 8 NC andequipped with following switch gears and accessories.The panel shall be complete with following switchgear and accessories. The structure of the switchgear must be fabricated using steel sheets coatedwith Alu-Zinc (Aluminium Zinc alloy)/PRINTED CRCA All major sub-components (switchgear, relays, meter & vacuum interrupters) shall be of same make. VCB and vacuum interrupters shall be designed for 100 short circuit operations at full short circuit of 25KA. Breaker shall be roll on floor type/ CASSET TYPE. Separate earthing truck shall be required for each bus earthing & cable earthing. Earthing truck shall be so designed that it is impossible to earth a live. It shall be provided with capacitive voltage divider and complete with audio visual annunciation, one for each panel. Item Continued as 2.01 to 2.04 49 INCOMINGS & Outgoing VCBs :Type : Air insulated VCB, autoreclosing, system voltage :- 11kV + 5%, 50 Hz+ 5%, 3 phase, rated voltage : 12kV, rated current : 800A in 40 ° C ambient, Short time rating for 3 sec : 26.3 kA, Short Circuit Making Current : 65 kA, insulation level (PF rms/ impulse peak) : 35 kA/75kA, System Ground : Solidly Earthed,Duty Cycle : 0 - 0.3 sec - CO - 3 min - CO, Break/ Make time :- Not more than 5 Cycle, Range for Auxiliary voltage for Closing / Tripping / Spring Charging : 85-110%/ 70-110%/85-110%. of rated voltage. The VCB must withstand 10000 mechanical, & 100 at rated short circuit current. The breakers should have auxiliary contact 6 No+ 6 NC, in minimum. The used Breakers will comply with IEC 62271/ IS 13118. Qty. - 3 Nos (1 no Incomer & 1 outgoings)Busbar: Rated Current : 800A @ 40°C ambient, Material : Silver Plated /Tined , High conductivity elecrolytic Copper Bus Bar sleeve :Heat Shrinkable PVC Sleeve with joints having full voltage soft PVC shroude Short time rating for 1sec :26.3kA -1 setCurrent Transformer:Voltage class: As specified in Circuit breaker ; Type: cast resin type, Dual core, Dual Ratio , Barden :10VA; Class insulation : Class E or better . Protection core: 5P10, Metering : 1.0 , Short time rating for 1 sec :26.3kA Ratio :300-150/1-1, 7 setsBus Potential Transformer: Rated Voltage : Primary - 11000 / ✓3 , Sec -110✓3; Type : Cast resin , draw out type, 3- phase , 3-limb complete with HV fuses . Barden : 100VA per phase ; Class of insulation : Class F or Better , Accuracy Class: 1.0;Rated Voltage factor : 1.2 continuous, 1.5 for 30 Secs. PT shouldbe drawnout type and serivce continuously shall be indepandent of Breaker trolly position...1set 50 Relay for Control & Protection: Numerical Type IDMT Relay (50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Additionally, condition monitoring CB wear, condition monitoring CT supervision, disturbance recorder, undervoltage & over voltage protection, trip circuit supervisioncan be measured through the relay. The device shall support webserver/web HMI through which we can monitor and control the relays over a ethernet Lan network. Licenses for theprogramming software shall be provided free of cost.The numerical relay shall have large mimic-based LCD screen display . .The relay shall have 8 Digital inputs and 8 Digital Outputs and one additional watchdog ouput.The device has to aloe controlling of min. six objects (circuit breakers, disconnectors and grounding switches). Controlling has to be done by “select-execute” or “direct control” principle. Controlling has to be possible by: through local HMI, remote communication, via digital input or via function key. Events has to be readable to SCADA systems, front panel or by setting software.The sample rate of the recording has to settable to 32samples/cycle.The devices shall provide storage up to events 2000 based on the resolution.The device shall support following communication protocols: Native IEC 61850 ed1 & ed2, Modbus TCP. The IEC 61850 communication has to support peer to peer communication (GOOSE) if requiredThe IEC 61850 interface must be able to configure through setting software. Also the same setting software has to be able to generate ICD filesThe device shall have KEMA IEC61850 edition 2 certificates - 3 sets. High Speed Master Trip relay VAX31- 3 Set, Ttrip circuit supervision relay-VAJH13-3 set6 Window Annunciation Facia . with ACCEPT, RESET & TEST Push Button - 3 set . Auxillary relay for Transmission faults (VAA33)- - 3 Set 51 Metering: Meters: 1-NosUL&CE Multifunction Digital meter displaying Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.Temperature Monitoring Sensor for the Three Phases of Incomer VCB Panel :Supply, installation, testing & commissioning ofthermal monitoring system to be provided to detect abnormal temperatures due to faulty connections and to prevent equipment B19damage. The switchgear shall have wireless temperature measurement sensors at all critical points:(a) 3 nos. foreach phase at incoming side cable joints The wireless temperature sensors installed on conductors shall be :(i) Installed with direct contact to hot point, to achieve accuracy of +/- 2°C(ii) Self-power (no auxiliary supply, no battery)(a) communicate wirelessly(c) Operate from -25°C to 125 °CThe system shall allow 2 configurable thresholds (pre-alarm and alarm). This system shall have integrated algorithms enabling to anticipate as early as possible an abnormal temperature, before damage occur (strong predictive capacity) and generate alarm through SCADA/monitoring software. Thermal sensor shall beself powered by the network current. Temperature data is sent via Zigbee wireless communication to provide high performance and accurate thermal monitoring. The sensor is secured to the connection point and is in direct contact with the measured point. Smartphones or tablets (with a Zigbee communication dongle) can be used with our Thermal Connect mobile application to scan data locally and can replace the need of periodic infrared scanning. Thermal sensors should comply to following standards:1 EN/IEC 61010,2010 2. UL 61010-12, 20123. ETSI EN 300238, 2012 V1.0.1 4. IEEE 802.15.4, 2013 52 Power Pack shall be with 220Volt AC Input & 24 volt DC continuous output suitable for closing /tripping indication of HT panel boards with 2nos 12Volt 100AH maintenance free batteries, chatging unit for trip system complete with suitable capacity dogital MFM connections with 2.5sq mm FRLS inaulated copper conductor cable etc as required.-4 set.The 11 KV HT Switchboard of 1 panel,shall bewith all accessories, interconnections,internal wiring, labels, space heaters etc. complete as required.3 panels shall be mechanically interlocked in such a way that only one operates at a time and multifunctional digital meters shall be interconnected and programmed in such a way that total consumption will come in one meter summating both of them.Note: 1. Quotated rates shall be inclusive of construction of foundation for the installation of VCB as per OEM drawing.2. The equipment shall be tested by SEI post sucessful installtion and report shall be submitted to this office. 53 Design, Manufacturing, Supply, Installation, Testing and Commissioning of 3 way 12 kV rated Ring Main Unit ofwith Fault Level 21KA 3 sec internal ARC 1 sec for tank and cable box , consisiting of 630A12 kV rated , 2 nos motorized type VCB as incomers & 1 load break switch as outgoings with metering modules along with necessary Earth Switches,battery and battery charger for shunt trip arrangement andMotor and other auxiliary circuit operation, HT CopperBus bar with current density not more than 1.6A/sq. mm as per detailed description as follows: RMU Construction: The switchgear and busbar shall all be contained in a stainless steel enclosure filled with SF6 at 0.3 bar (300 hPa) relative pressure to ensure the insulation and breaking functions. Sealed for life, the enclosure shall meet the sealed pressure system criterion in accordance with the IEC 62271-1 standard (§ 3.6.5.4): a volume for which no further gas processing is required during its entire expected life”. In addition, manufacturer shall confirm that maximum leakage rate is lower than 0,1 % / year. It shall provide full insulation, making the switchgear insensitive to the environment (temporary flooding, high humidity...), IP67 degrees of protection in accordance with recommendation IEC 60529 § 14.2.7. No SF6 gas handling required at site. Thus assembled, the active parts of the switchgear shall be maintenance-free and the switchboard shall be low-maintenance. The switchgear operating mechanism shall have an IP2X protection and cable chamber shall be IP55, Over all IP protection shall be IP55 . The tank shall be made of at least 2mm unpainted stainless steel. Item Continued as 3.01 to 3.05 54 VCB is the preferred dielectric medium for MV RMUs. Oil filled switchgear will not be considered. RMU shall be in accordance with IEC 60376.Any accidental overpressure inside the sealed chamber will be limited by the opening of a pressure limiting device in the lower part of the enclosure. Gas will be released to the rear or the bottom of the switchboard away from the operator and internal arc tested for both cable and tank for 21KA 1sec AFLR with test conducted with minimum 3 functions TankNumber of mechanical operations of Circuit breaker 2000 O/C , Number of electrical operations at full loop current for LBS: 100 O/C , Number of electrical operations at full loop current for CB: 2000 O/C,. Manufacturer shall provide type test report to prove compliance with IEC 62271-200 Annex A, Internal arc classification class AFL with 21kA 1s for the enclosure. Make of the RMU, vaccum intrtupter , relay & meter shall be of same OEM. All the test certificate shall be in the name of the OEM only . If there is any name change / acquisition by other OEM happened for the RMU then test cerificates shall contain the new OEM name only.HT System : 3 phase -3 wire , HT Fault level21 kA, Power System earthing - solindly earthed at up stream source, HT Copper Bus with Short Time Curent rating 21 kA for 1 Sec ( 3Sec), Continuous current rating at least 630 A. tank and cable chamberof RMU must be IAC rated for 21 kA for 1 Sec AFLR. Design ambient to be considered as 40 Deg C.HT Circuit Breaker :(i) There shall be 1nos.load break switches as incomings and 2 nos 12 kV rated VCBas outgoing ( total 3 nos.) . The circuit breakers shall be fixed type. All of the switchgear shall be capable of withstanding this current without any damage being caused, in accordance with the recommendations IEC 62271-1 and IEC 62271-200.Loss of service continuity class: LSC2(ii) The Circuit Breaker must be rated for 12 kV ( nominal Voltage), 28 kV/75 kVp ,3 Phase, 50 Hz, Short Circuit Fault Level of 21 kA for 3 sec. 55 (iii) No. Of Close Coils - 01 no. operable at 24 V DC (85% - 110%)/ Spring Assited Closing, No. of Trip Coils - 01 nos. ,operabale at 24 V DC ( 70% - 110%) for shunt trip.(iv) Provision for supervision of the shunt Trip Circuits for the Trip Coils to be provided. (v)Switchgear classification: PM class(vi) Loss of service continuity class: LSC2(vii) Duty Cycle : O – 3min – CO – 3min – CO, Vacuum Circuit breaker shall be of M1, E2, C1 duty and capable for minimum 50 short circuit breaking operation at full short circuit level.(viii) STC rating 21 kA for 3 Sec (for Vacuum Interrupter).(ix)Vacuum Interruptor must be hermetically sealed and must comply IEC 60056 ( along with latest amendments). Vaccum interrupter shall be of same make as RMU(x)Circuit Breaker to be equipped with Suitable tripping arrangement with push button, Mechanical counter to assess the total number of operations of the breaker, Mechanical ON / OFF indicator, Auxiliary switches, Auxiliary Contacts( at least 2 NO + 2 NC of Class 2 category), Emergency trip push button.(xi) The Operating mechanism shall be spring charged motor operated/ spring assisted as per OEM type tested design type with Spring Charge Universal motor operable on 24 V DC / 230 V AC.(xii)Suitable monitoring of Bircuit Breaker status ( ON, OFF, Trip, CB Spring charged if applicable), Trip Circuit Healthy / Unhealthy, DC healthy/unhealthyto be provided using (xiii) Voltage Presence Indicator shall be provided against each HT circuit ( against each VCB) on line side for knowing the presence of line enerzisation status.(xiv)Number of Mechanical operations at full rated current for breaker: 2000 O/C 56 HT CT /PT : Load Break Switch - 11 KV, 630A, 21KA for 3sec Motorized Load break switch; with built in line side manual earth switch. Earthing should be completed within 2 operations only(i.e 1. Main switch - OFF, 2. Earth switch - ON). LBS shall have 3 positions, open or disconnected, closed and earthed, and will be constructed in such a way that interlocking prevents unauthorized operations. For earth switch, manual opening and closing will be driven by a fast-acting /snap action mechanism, independent of operator action. LBS and earth switch shall have a min of 1000 (M1) mechanical operations ,and 5 nos closing operations at rated SC current. LBS should have 100 electrical operations at rated current. LBS & Earth Switch should have separate apertures for operation.i) One set of 03 nos. ( for 3 phases) dual core Cast Resin CTs for Eachincomer VCBcomplying with IEC:60185 & IS 2705 ( along with latest amendments) , Core -1 - 400-200/1 A , 2.5 VA, Cl 0.5 for metering ; Core-2 - 400-200/1 A, 2.5 VA , 5P10 for Protection.ii) 01 no. of 03 phase Dual Core PT forHT bus ( 11 kV)with protection HRC fuseCore 1- 11kV /√3 / 110V/√3, Cl 0.5s, 50VACore 2- 11kV /√3 / 110V/3, Cl 3P, 50VA(iii) Multifunction Meter:2 Nos. 3 phaseDigital Multifunction Meter6400NGwith Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.for each VCB panel ( 96 mm x 96 mm) , Flush mounted, Class 1 conforming to IEC 62053-22 ( along with latest amendments). 57 Protection Relay: (i) 2 Nos. of Numerical Type Self-powered IDMT Relay(50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Relay should communicate on Modbus RS-485.(ii) Each VCB must have separate Anti Pumping Relay / Antipumping feature through motorization circuit.Fault Passageindicator: The FPI shall facilitate quick detection of faulty section of line. The fault indication may be on the basis of monitoring fault current flow through the device. The FPI should be self-powered and should have internal lithium battery for external indication and setting of FPI in the absence of current.The FPIs shall include: Fault detection - Phase to phase and Phase to earth faults.One potential- free output contacts for hardwiring to RTUs. On this basis, the SCADA/DMS will be able to monitor phase / earth fault condition.Local fault indications - LCD display on FPI front panel along with LED indication on front panel of RMU enclosure.Multiple reset option : End of time delay (Adjustable from 2 to 16 Hrs)Remote reset (Via potential free input contact of FPI)Manual reset (Reset button on front panel of FPI)Automatic reset on current restoration.The characteristics of the FPIs shall include: Phase fault thresholds configurable from at least 100 to 800 A,Earth fault thresholds configurable from at least 20 to 200 AMultiple number of steps for adjusting phase and earth fault thresholds. Fault current duration range configurable from at least 40 ms to 100 ms in 20 ms steps and further 100 ms to 300 ms in 50 ms steps. Variations with respect to these characteristics may be acceptable as long as they prove applicable and provide the same or better flexibility. 58 EARTHING : The cables shall be earthed by an earthing switch with short-circuit making capacity, in compliance with IEC 62271-102 standard. The earthing switch can only be operated when the switch is open. The switch and earthing switch operating mechanism shall have a mechanical endurance of at least 1000 operations. Integrated line side Earth switches shall be provided in each HT Circuit. ( against each VCB)RMU Bushing & Cable Termination: It is preferable to have all bushings accessible from the front of the RMU. Bushings along the sides or the rear of the RMU are not acceptable.For each cable compartment, the bushing shall be at the same height in order to facilitate a possible reversal of the cables. The bushing should be conveniently located for working with cables specified and allow for the termination of these cables: - 630 A M16 bolted connectors for switch-disconnectors and vacuum circuit breakers functions.The profiles of the cable connection bushings shall be in compliance with IEC-60137 standard. Cable clamps:A cable clamp arrangement must be provided for all network cables terminated on the RMU.Provision for Cable Entry: There shall be suitable provsion for Cable entry from bottom through 3 mm thick CRCA steel thick detachable gland plate along with provision for termination of 2 runs of 3 c X 300 Sq mm 11 kV (E ) , XLPE insulated Aluminium Cables (for HT side) and at LT side runs of cables matching with outgoing MCCB current rating.Note: (i) Quotated rates shall be inclusive of foundation for the installation of VCB as per OEM drawing.(ii) The equipment shall be tested by SEIaftersuccessful installtion and report shall be submitted to this office and cost deemed to inclusive in qoated rates 59 M&L for water proof, 3 core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade including PVC conduits properly fixed on steel poles using GI wire for electrical connection of street light fittings, complete all as specified and directed. 60 Supply and fixing junction box having protection dust proof, acid resistant, shock proof, fire retardent self extinguisher for outside installation with knockout entry for cable of size 10 - 25 sqmm andminimum size 295x195x95 mm with terminals, with and includingbrackets for street light pole mounting andone 6A MCB SP complete all as specified and directed. 61 M&L for Advanceencapsulated compound based Chemical earthing CPRI tesed maintenance free , pipein -pipe technology upgraded(Zinc & Alloy coated). , Zinc & Alloy coated (80 -100) microns with pure zinc (99.9%) & Alloy coating (200-250) microns. Earthing system conforming IS 3034. The outer and inner pipe should be 76.2 mm and 41.9 mm dia respectively of3 mtrs long zinc coated with additional special alloy coating 300 mm on top side for additional protection of the terminal . The annular space between the pipes to be filled up with Compactfill (CF) (Crystalline Conductive) mixture which should bemachine pressed in the pipes not disintegrate or collapse when outer pipe corrodes . The inner pipe should be extended with terminals for connectivity.The job includes digging the pitsin any type of hard densesoilof min size 1000 X 1000 X 3050 mm depth taking out excavated soil, lowering/ placing thethe pipe in pipe earth electrode in pit in center ,filling of pure conductolite back filling compound (BFC Conductolite) having excellent moisture retaining capacity in 300 mm around the electrode(minimum 4 bags of 25 KG per pit per unit) or more qty of backfillcompoundas required to fill around the the elctrode in 300 mmin circumfrance of electrode . Contractor has to fill the remaining portion of pit withlow resistivity soil (agriculture soil) free from stones etcs, to be bring from out side defence landas the soil resistivity ofStn is very high and mixed with min 3 Bags of 50 Kg each of Bantonide clay. The BFC should be eco friendly it should not contain envernmently hazardous material/metal having ROHS certification from NABL accredited lab.The earth pit should be provided with a FRP earth pit cover for protection and safe guard of terminals. The material of earth electrodeshould have good electrical conductivity & anti corrosion property in wide range of soil conditions. The job also include M & L for in PCC(1:3:6) typeC-1 around the FRP cover for support and foundation and colouring the PCC work withdesired colour.completeall as specified and directed. Item Continued as 6.01 62 Note : (i) Design of earth electrode should be of pipein-pipetechnology .(ii) Contractor have to submit literature of earth electrode and get the make approved of GE before procurement.(iii) The earth electrode shall be CPRI tested to withstand short current test for 60kA rms for 1.0 second and 150kA for peak current.(iv) Contarctor has to fill pure back fill compound conductolite all around the earth electrodein 300 mm bore up to full depth of bore.(v) Contractor shall refill the pit with low resistivity soil (agriculature soil ) free fron stone etc and mixed with 06 bags of Bentonite of 25 Kg each to achive the low resistance values. (vi) copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection. This Earthing System used for VCB and RMU only. For Solar Power Plant Earthing System is already deemed to be included in quoted rates.(vii) Necessary cost of repair to plinth protection and connected plate and earth continuity conductor by providing 2 x brass nuts bolts and brazing of joints,bringing argiculture soil from out side defence land and cost of 6 x Bags of bentonidedeemed to be included in the item rate.(viii) Contractor has to clear the side and disposed off the excavated soil from pit on completion of work. 63 SAFETY EQUIPMENTSSupply and fixing Rubber hand gloves suitable for 11 KVas per OEM recommendationcomplete all as specified and directed. 64 S&F for glass framed Shock treatment chart both in Hindi & Englishand connected accessoriescomplete all as specified and directed. 65 S&F for dry powder chemical type 4.5 kg fire extinguiser with clamps and connectedaccessories ISI Marked complete all as specified and directed. 66 S&F for single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required as per OEM recommendationcomplete all as specified and directed. 67 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 68 Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, manholes, laying of UG cables/pipes etc. not exceeding 10 Sq.m on plan and getting out in soft/loose or any type of soil complete all as specified and directed. 69 Removing excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 70 Returning filling in, soft/looseor any type of soil including spreading leveling watering and ramming complete all as specified and directed. 71 Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.50 cum, getting out,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface all as specified & as directed. 72 M&L for RCC M-20, design mix (using 20mm graded crushed stone aggregate), including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 73 M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plugs, bolts, nuts & screws as specified type 410 SP-31, 9.0 meter longinclusive of two coats of aluminium paint over one primer coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.NOTE : (a) The poles shall confirm to IS - 2713 & each component pipe shall be ISI Marked & confirm to IS - 1161. (b) Necessary earthwork, PCC etc. shall be measured & paid separately under relevant items of work. 74 S & F LED Street lights nominal power 90 Watt, LED of Make Osram; Bridgelux ; Philips; Nicha; Cree; Samsung, LED wattage of minimum 3 watt each and Maximum 5 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 120 lumens per watt, built-in integrated electronic LED driver, output open /short circuit protection, phase to phase protection, over voltage protection, surge voltage protection upto 4 KVs, protection grade IP 66, CRI greater than 80%, CW available CCT of 5700K, power factor of minimum 0.95, pressure die-cast aluminium alloy housing with polyester powder coated metallic silver finish after phosphochromate treatment, life span of minimum 50000 working hourswith IK10 and L70 on including fixing at any height and including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed.(i) If connection.cable from pole Juction box to street light and street light bracket up to 2 mtrs be included and measured in unit rate item, Beyond 2 mtrs of length to be paid seperately under respective items.(ii)At location where street lights/flood light are connected through overhead conductor, connection cable from light fitting to overhead conductor is deemed to be incl in the item rate. (iii) All LED street light/flood lights shall be properly connected with earth dolly provided with fittings and steel poles earth bolt.(iv)All LED lights have replacement warranty of 5 years from the date of completion of the contract accordingly condition 46 of GCC (IAFW-2249) shall be amended to extent mention above. Contractor has to submittwarranty certificate from manufacturer . Payment of light fitting will be released after receipt of 3 year replacement warranty certificate from manufacturer.(v) The LED lights will replaced bythe contractor free of cost in the case of manufacturing defects and Failure due to electrical impact if not connected properly with earth. Hence it is contractor responsibility to connect the light fitting earth wire and shall be grounded properly.(vi) The contractor shall submit the surge protection certificate and Type test certificate LM 79, LM 80 for luminaries from LED manufactutre. 75 M&L for Cement concrete (1:4:8) type D2, (Using 40mm graded crushed stone aggregate) as in foundations of poles and stay, filling and mass concrete complete all as specified and directed. 76 M&L for plain cement concrete (1:3:6), type-C2 (40mm graded crushed stone aggregate) as in foundation, filling and mass-concrete, coping etc for pole foundationwith and including necessary formwork complete all as specified and directed. 77 M&L PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete and copingwith and including necessary formwork complete all as specified and directed. 78 Material & labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick burried directly in ground (Earth pit not less than 4 mtr deep below ground level) with top edge of the plate not less than 3.25 mtrbelow ground level connected to copper strip 20 x 3.15 mm as earth lead by brass nut bolts washer including brazing the copper strip with copper plate as shown in electrical plate No 3 connected to earth test point including necessary excavation for earth pitin hard dense soil, rocky / disintergate rock, filling charcoal and salt around the plate in layers , filling the pit with low resistivity agriculture soil free from stones, to be bring from out side defence land and mixed with Bentonite , (4 bags of 25 Kg each ), construction ofinspection pit ( earth pit chamber) of brick work of size 600 x 600 x 600 mmwith PCC copping of 1 :1.5: 3, 12.5 mm aggregate A1 with MS sheet 2.8 mm plate cover on frame ofangle iron of size 40 x 40 x 5 mm with , wire mess, funnel, test point, 40 mm dia GI protection pipelightgrade and20 mm GI peforated pipefor wateringetc complete and testing on completion. The electrode and lead shall be of copper all as specified and directed by Engr-in-charge (Copper strip upto 7.5 RM will be included in the item rate and copper strip beyond 7.5 RM will be measured seperately Item Continued as 22.01 79 NOTE :-(i) Contractor shall uselow reisistivity fresh agriculture soil , mixed with 4 x Bags of bentoniteclay of 25 Kg each for refillingthe pit to achive the desired resistance.(ii) copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection(iii) Necessary cost of repair to plinth protection as per existing specification and connected plate and earth continuity conductor by providing 2 x brass nuts bolts and brazing of joints,bringing argiculture soil from out side defence land and cost of 3 x Bags of bentonitedeemed to be included in the item rate.(iv) Contractor has to clear the side and disposed off the excavated soil from pit on completion of work.(v) Contractor has to submit test report of earthing after completing the earthing.(vi) Bentonite clay should be Conf to IS 6186: 1986.(vii) The cost ofCopper strip of size 20X3.15 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately.(viii). All the joints in copper strip and connection with Earth Plate to be welded through brazing and in addition by proving brass nut bolt and washer are deemed to be included in the unit rate. (ix) Cost of brazing / welding and nut bolts are deemed to be included in the unit rate. (x) Cost includes removal of excavated soil upto a distance of 100 mtrs. 80 Supply and fixing copper strip of size 20 x 3.15mm as earth continuity conductor or main earthing lead fixed on V typeporcelain insulator, 4 BM, heavy duty ( ceramic bus bar supportinsulator off whitecolour ofsuitable for mounting strip of 20 mm wide x 3.15 min thick) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3.15 mm copper strip brazingto each joints and connected with by providingbrassnut boltsand washer including test point all as specified and directed by Engr in Charge. Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators to be provided in every 1 x metre of strip and rate of the same deemed to included in quoated rates) 81 M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. 82 Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and as directed. 83 M&L for GI pipe 100 mm bore, light grade with all fittings and fixtures (ISI Marked), laid in trenches, under road or fixing on wall/ pole /crossing drain /nallah etc. of bore complete all as specified and directed. 84 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 85 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 86 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 87 Supply, laying & testing PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 63 mm dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brss threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches complete all as specified and as directed.Note:The contractor shall submit 15 Years warranty certificate against leakageand defect liabilty period deemed to amended acordingly. 88 Supply, laying & testing PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 32 mm dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brss threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches complete all as specified and as directed.Note:The contractor shall submit 15 Years warranty certificate against leakageand defect liabilty period deemed to amended acordingly. 89 S&F for 63mm (OD) PP-R Gate valves (brass insert)and connected acessories complete all as specified and as directed. 90 S&F for 32mm (OD) PP-R Gate valves (brass insert) nd connected acessories complete all as specified and as directed. 91 M&L for hard core of gauge not exceeding 63mm with broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. 92 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 93 S&F for RCC pipes of 600 mm dia, NP-2 laid and jointed complete with collars complete all as specified and directed. 94 S&F for 250mm bore Flue pipes of mild steel sheet, black, in suitable lengths as approved by GE and fixed to walls complete all as specified and directed. 95 M&L for Brickwork with fly ash bricks (modular bricks ), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6) complete all as specified and directed. 96 Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound will be deemed to included in qoated rates. 97 M&L for applying three coats of white wash on newly plastered wall surfaces including preparation of surface complete all as specified and directed. 98 S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. 99 S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge. 100 S&F flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 101 S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and n. exc 10 cm long, diameter of neck 5 to 10 mm complete all as specified and directed. 102 Supply and fixinggalvanized steel chain link fence fabric of mesh size as approved , made out of 4 mm nominal dia of mesh wireconforming to IS 2712-2003 and having zinc coating of type heavy as laid down in IS-4826 including line wires/ binding complete all as specified and as directed(A Board of Officers under the orders of GE shall be convened to ascertain the weight per square metre of galvanized steel wire chain link fencing brought at site by the contractor against each lot of materials). 103 S&F 10mm round bars Fe-410-W (Gde-250) quality-A or Fe-290-(Gde-E-165) as in stiffner to hold the chain link fencing fixed with angle iron post inclucinding necessary welding and fixing arrangement at ends complete all as specified and directed . 104 S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steelpins, etc. complete all as specified and directed . 105 Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. 106 Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. 107 Materials and Labour for reinforced cement concrete M-20design mixin columns; pillars; piers; posts; struts etc,complete all as specified and directed. 108 S&F for Mild steel TMT bars 10mm dia and over, conforming to Fe 500 D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 109 S & F for mild steel TMT bars 6 to 8 mm dia, conforming to Fe 500 D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, stirup,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 110 M&L for construction of valve chamber with MS sheet cover 3mm thick with angle iron) frame of size 50 x 50 x 6mm and locking arrangements including painting one coat of primer followed by two coats of black sysnthetic paint including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork,paintin one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed of sizes 800mm x 800mm x800mm (internnal dimensions) complete all as specified and as directed. 111 Sch A Part-II (Phase-II) 112 Providing Services for Manning and Operation of Solar Power Plant 0.8 MWp near 33 KV receiving stationat Sevoke Mil Station for FIRST YEAR after completion of Ph-I of the subject work with oneskilledcategory Electricianhaving certificate of Surya Mitra from NISE) for twoshifts of 8 hour, one helper (semi-skilled category) in two shift of 8 hrs eachcontinuous operation (including Sunday/Holiday) to maintain sub station in/out side Panels, Invertor, DC junction box, VCB as specified, including daily and weekly check up including cleaning of PV modules complete with suitable cleaning cloths etc , upkeeping the installation operational and in health condition, having own conveyance and communication system like mobile etc. complete, for Solar Power Plant with all minor consumable and expendable items and labour and tools for smooth and efficient operation complete all as specified and directed by Engineer-in-Charge. Make of spare parts / equipments of the Solar Power Plant :- Same as installed in the preceding phase of the work.Repair or replacement ofdefective components or spare parts will be carried out free of cost under DLP and comprehensive Maintenance as per OEM recommendation up to DLP period included in BOQ item No. 1.00. The Contractor may submit his claim for every months on pro-rata basis subject to condition 64 of IAFW-2249 (General Conditions of Contracts)The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 17,92,949.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. Item Continued as 56.02 to 56.06 113 NOTES :- In addition to and Manning, Operation and Maintenance of Solar Power Plant, the following works will also be carried out by deputing addl manpower where required, to the entire satisfaction of Engr-in-Charge.(a) Minor repairs and preventive maintenance required to ensure serviceability and efficiency of complete MRS complex including supply of HT 11 KV fuse wire of proper sizeand minor spares such as nut, bolts, spring, lock nut of VCB/OCB as per sample, broom, duster, grass cutting tools, phawara, pick axes for cleaning/grass cutting of complete at Sub Stn Complex. 114 (b) Record of activities such as voltage / current / PF / Energy consumed / temp of transformers, break downs, day to day maintenance of Solar PV Plant etc.(c) The contractor shall ensure that all safety precautions are strictly exercised by the staff employed by him.Adherance to IE rules and statutory rules in vogue must be ensured.The contractor shall be fully responsible for any mishap that occurs due to any fault of the employee or due to non adherance of safety norms.(d) Record of activities such as attendance register, duty roster, pay distribution register of the whole staff employed by the contractor.(e) The electrician staff employed by the contractor shall be ITI holder with four years experience. 115 (g) Security lights within the complex will be operate by the tenderer. (h) The under mentioned tool kitwill be provided at site with person on duty :-(i) Electrician tool kit such as screw driver set, tester, test lamp, cutting plier, insulation tape, fuse wire of required size. (ii) Tongue tester(iii) HT megger(iv) First aid box (v) Shock treatment chart duly framed(vi) 33 and 11 KV Hand gloves(vii) 33 KV discharge rod withcopper chain(viii)) Helmet -02 nos(ix) Suitable Footwear - 02 nos(x) Cotton protective clothing with long sleeves duly embossed with GE Sevoke as directed. The tenderersquoted rates shall be deemed to be include the cost of all above provisions and nothing extra will be paid on any account. 116 (xi) The Bidders shall abide by the latest Labour rules and minimum wages Act. Wagespaid by the bidders to the persons employed shall not be less than the minimum wages fixed by the state/central government from time to time whichever is higher. (xii) The Bidders is responsible for insurance, EPF, ESI, Bonus, Labour welfare cess et., as applicable and shall be paid to the workmen as per existing Labour rules/ Acts/ regulations and rate quoted shall be deemed to be included for the same.(xiii) Dress Code : The bidders shall provide the workmen with Dark Blue Colour uniform {formal pant & T-shirt} with labels showing/ printed i.e. Name of the firm and designation on front and on the back of the T-shirt along with protective clothing, Industrial safety shoes, protective gears like helmet, safety belt etc..(xiv) Supervision and attending of all incoming & outgoing Solar Power Plant equipment metering equipments & monitoring to loads & other parameters of incomming & outgoing feeders & maintaining log sheet and attendance sheet. 117 INSURANCE: The Bidders shall also insure the workmen employed on the job.The Bidders shall be responsible for all Accidents/Injuries happening to the workmen. Any accident causing minor/fatal injury, partial disability due to any untoward incident or non-adherence to safety and IE regulations or fault in maintaining of internal electric supply system or on account of any mishandling/ wrong operation/ lack of knowledge of safety precautions or on account of any circumstances beyond his/ their control, the bidders shall be solely responsible for settling all claims of compensation to the deceased, falling which department will have a right to recover any sum indicated/ claimed by Labour commissioner/court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Bidders shall provide first aid boxes to meet any emergency situations. 118 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for SECOND YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 18,75,076.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 119 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for THIRD YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 19,61,175.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 120 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for FOURTH YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 20,51,671.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 121 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for FIFTHYEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 21,46,848.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 122 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for SIXTH YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 22,46,564.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 123 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for Seventh YEAR after completion of Ph-I.NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 23,51,386.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 124 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but forEight YEAR after completion of Ph-I.NOTE :-(a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 24,61,315.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 125 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for Ninth YEAR after completion of Ph-I.NOTE :-(a)The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 25,76,917.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 126 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for TENTH YEAR after completion of Ph-I.NOTE :-(a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 27,03,441.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 127 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor FIRST YEAR after expiry of DLP of Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum andcost of item priced upto ₹500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost. Repairs of minor components any other major components are also in the scope and cost of labour for minor / major components is deemed to be included in the quoted rate for this item.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 128 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor SECOND YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted costrepairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 129 Comprehenisve maintenance ofSolar Power Plant 0.8 MWpfor THIRD YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 130 Comprehenisve maintenance ofSolar Power Plant 0.8 MWpfor FORTH YEAR after DLP of Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 131 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor FIFTH YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM. (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d) Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 132 Prime Cost Sum. The prime cost to be used as directed by the Accepting Officer vide Condition 1 (v) and 5 of IAFW-2249 (General Condition of Contracts) forming part of the tender documents.(a) Provide a prime cost of Rs.3,00,000.00 forsupply only of spare parts required for comprehensive maintenance after expiry of DLP of Phase-I, through a BOO convened by the CWE. The spares shall procured directly from the OEMs or their aurhorised distributor/dealer as approved by GE.(b) Bidders/Contractors quoted amount shall be inclusive of his overhead and profit and including all taxes and insert amount to cover all. The Bidders/Contractors is to quote lump sum amount under Column 6 covering all the aspects mentioned here in before, representing (%) percentage under Column 9, Above/Below (+ or - denomination) the Prime Cost Sum inserted by MES under Column 5. However, the quoted amount under Column 6 shall not exceed 15% (Fifteen Percentage) of Prime Cost Sum inserted by MES under Column 5. In case, the Bidders/Contractors quoted amount is in excess of 15% of the estimated amount, the same shall be restricted to 15% (Fifteen Percentage) and the amount quoted shall be corrected accordingly to work out the contract sum. Item Continued as 70.01 133 NOTE:-Prime Cost Sum shall be governed in terms of condition 1 (v) and 5 of IAFW-2249 (General Condition of Contract) and to be regularized through Deviation Order. The following procedure shall be adopted to execute the Prime Cost Sum :-(a) Step –I Service Engineer of OEM along with site executive shall visit every month for Preventive and corrective maintenance on all the Solar Power Plant as specified in BOQ herein before, and undertake routine comprehensive maintenance and identify the list of damage / defective spare parts in Solar Power Plant. Service Engineer have to submit report to concerned Engr-in Charge and BOO before undertaking replacement/ repairs, except in case of emergency.(b) Step –II Subsequently BOO will verify the same and submit the finding to the CWE after assembly of board in terms of CA Provision for concurrence.(c) Step –III After concurrence of BOO, the Engr-in-Charge will direct the contractor and the service provider to replace the unserviceable spare parts.(d) Step –IV Serviceability certificate of Solar Power Plant duly signed by the Service Engineer, BOO findings, GST enabled purchase voucher for the replaced spare parts alongwith draft DO details shall be submitted to the GE for placing of DO’s. The advance on account shall be accompanied alongwith the said DO’s for payment.
Contract Date: Mar 17, 2026 Contract Value : ₹ 6.86 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
West Bengal View Result →
13.
Educational and Research Institute #9410898 Technical Bid
Supply Of Consumables/Non-Consumables For The Department Of Biochemistry , Consumables Kts (Diagnostic Kits - I) , Ada Reagent With Calibrator Compatible With Beckman Coulter Au 5811 , Assayed Internal Quality Control : 1.The Internal Quality Control Program Should Provide Software, Free Of Cost For Participating In Inter Laboratory Conprarison Programme And Real Time Data Monitoring. A Software Should Provide Fixed Mean/Sd And Comprehensive Audit Trail Report. The Software Should Also Provide Westgard Advisor & Data Analysis Grid Alongwith Tea Specifications. 2.Qc Material May Be Lyophilized Or Ready To Use Liquid Withusfda Approval.It Should Have Shelf Life Of 3 Years At 2 To 8° C.For Lyophilized Material, Stability After Reconstitution Should Be Atleast 7 Days At 2 To 8 ° C. 3. The Iqcprogram Should Cover All The Parameters Of Chemistry, Hormones , Tumor Markers And Special Proteinsin Blood And Chemistry Parametrs In Urine, As Listed Below. 4. Rates Should Be Quoted Against Each Category. All Thecategories Will Be Selected From A Single Firm Only, To Participate In The Interlaboratory Comparison Program. The Overall Rate Of All The Items Put Together Will Be Considered For L1 Selection. , Assayed Internal Quality Control For Chemistry Parameters (Level 1) Should Cover The Following Parameters: Albumin,Alkaline Phosphatase (Alp) ,Alt/Sgpt, Amylase, Ast/Sgot,Bilirubin (Direct), Bilirubin (Total) , Calcium (Total), Chloride,Cholesterol (Hdl),Cholesterol (Ldl), Cholesterol (Total),Creatine Kinase (Ck),Creatinine, Ggt, Glucose, Iron, Uibc, Ldh, Lipase, Magnesium, Phosphorus, Potasssium, Protein( Total), Sodium, Triglycerides, Urea And Uric Acid. , Assayed Internal Quality Control For Chemistry Parameters (Level 2) Should Cover The Following Parameters: Albumin,Alkaline Phosphatase (Alp) ,Alt/Sgpt, Amylase, Ast/Sgot,Bilirubin (Direct), Bilirubin (Total) , Calcium (Total), Chloride,Cholesterol (Hdl),Cholesterol (Ldl), Cholesterol (Total),Creatine Kinase (Ck),Creatinine, Ggt, Glucose, Iron, Uibc, Ldh, Lipase, Magnesium, Phosphorus, Potasssium, Protein( Total), Sodium, Triglycerides, Urea And Uric Acid. , Assayed Internal Quality Control For Hormoneslevel 1 )Should Cover The Following Parameters: Cortisol,Estradiol,Ferritin,Folate,Fsh,Hcg,Lh,Progesterone,Prolactin,Ipth,T3 (Free) T4 (Free),Testosterone,Testosterone (Free),Tsh,Vitamin B12 , Assayed Internal Quality Control For Hormoneslevel 2 ) Should Cover The Following Parameters: Cortisol,Estradiol,Ferritin,Folate,Fsh,Hcg,Lh,Progesterone,Prolactin,Ipth,T3 (Free), T4 (Free),Testosterone,),Tsh,Vitamin B12 , Assayed Internal Quality Control For Hormoneslevel 3 )Should Cover The Following Parameters: Cortisol,Estradiol,Ferritin,Folate,Fsh,Hcg,Lh,Progesterone,Prolactin,Ipth,T3 (Free) T4 (Free),Testosterone,Testosterone (Free),Tsh,Vitamin B12 , Assayed Internal Quality Control For Tumour Markers (Level 1)Should Cover The Following Parameters: Alphafetoprotein (Afp) Carcino Embryonic Antigen ( Cea),Ca 125,Ca 19-9,Psa , Assayed Internal Quality Control For Tumour Markers ( Level 2 ) Should Cover The Following Parameters: Alphafetoprotein (Afp) Carcino Embryonic Antigen ( Cea),Ca 125,Ca 19-9,Psa , Assayed Internal Quality Control For Tumour Markers ( Level 3) Should Cover The Following Parameters: Alphafetoprotein (Afp) Carcino Embryonic Antigen ( Cea),Ca 125,Ca 19-9,Psa , Assayed Internal Quality Control For Amh(Level 1) , Assayed Internal Quality Control For Amh(Level 2) , Assayed Internal Quality Control For Amh(Level 3) , Assayed Internal Quality Control For Special Proteins ( Level 1 ) :Ceruloplasmin And Crp , Assayed Internal Quality Control For Special Proteins( Level 2 ) :Ceruloplasmin And Crp , Assayed Internal Quality Control For Special Proteins( Level 3 ) :Ceruloplasmin And Crp , Assayed Internal Qc Material Forck-Mb , Assayed Internal Quality Control For Urine Parameters (Level 1): Should Cover The Following Parameters:Amylase, Calcium, Chloride, Cortisol,Creatinine,Glucose, Magnesium, Phosphorus,Potassium, Protein (Total), Sodium,Urea, Uric Acid And Microalbumin , Assayed Internal Quality Control For Urine Parameters (Level 2)Should Cover The Following Parameters: Amylase, Calcium, Chloride, Cortisol,Creatinine,Glucose, Magnesium, Phosphorus,Potassium, Protein (Total), Sodium,Urea, Uric Acid And Microalbumin , Assayed Internal Qc Material For Ada Level 1 , Assayed Internal Qc Material For Ada Level 2 , Molecular Chemicals - Ii , Coomassie Brilliant Blue , Diethyl Pyrocarbonate (Depc) Molecular Grade (500Ml/Bottle) , Cdna Synthesis Kit With Rnase Inhibitor (50Preps/Kit) , Disodium Edta(Molecular Grade) , Dna Gel Loading Dye ( For Electrophoresis ) , Dna Ladder - 1Kbp , Dna Ladder - 50Bp , Equilibrated Phenol (Ph 7.8) Molecular Grade , Ethidium Bromide , Isopropranolol (Molecular Grade) , Magnesium Chloride (Molecular Grade) , Nuclease Free Water , Pcr Master Mix 9Including Taq Polymerase,Dntps & Mg2+) ( 100 Reactions)/5 Ml , Phenyl Methyl Sulfonyl Flurine (Pmsf) , Phosphate Buffered Saline (Pbs) , Primer Per Base , Protease Inhibitor Cocktail For Mammalian Tissue And Cells , Sds (Molecular Grade) , Sodium Hydroxide (Molecular Grade) , Sucrose (Molecular Grade) , Tae Buffer 50X Solution Molecular Grade , Tris Buffer(12 Mm) Molecular Grade , Triton X 100 (1%)(Molecular Grade) , Trizol (Molecular Grade) , Chemicalsiii , 2,6,Dichlorophenol Indophenol (25G/Bottle) , Acetic Acid (2.5L/Bottle) , Acetic Anhydride (500Ml/Bottle) , Acetone (2.5L/Bottle) , Acrylamide(500G/Bottle) , Agarose(Sigma)(500G/Bottle) , Alpha Napthol (100G/Bottle) , Ammonia (2.5L/Bottle) , Ammonium Hydroxide (500G/Bottle) , Ammonium Molybdate (500G/Bottle) , Ammonium Oxalate(500G/Bottle) , Ammonium Sulphate (500G/Bottle) , Aniline Citrate(500G/Bottle) , Ascorbic Acid(500G/Bottle) , Barium Chloride (500G/Bottle) , Barium Sulphate (500G/Bottle) , Bilirubin , Bsa (Bovine Serum Albumin)(100G/Bottle) , Calcium Chloride (500G/Bottle) , Casein (500G/Bottle) , Chloroform (2.5L/Bottle) , Copper Acetate (500G/Bottle) , Copper Sulphate (500G/Bottle) , Dextrose (500G/Bottle) , Diacetyl Monoxime(100G/Bottle) , Ethanol(500Ml/Bottle) , Formaldehyde(500Ml/Bottle) , Glycine(500G/Bottle) , Hydrochloric Acid(2.5L/Bottle) , Hydrogen Peroxide(500G/Bottle) , Lactose(500G/Bottle) , Maltose(500G/Bottle) , Mercuric Chloride(500G/Bottle) , Methanol(2.5L/Bottle) , Molybdic Acid(100G/Bottle) , Nitric Acid(2.5L/Bottle) , Soap Solution (5L/Can) , Sodium Carbonate(500G/Bottle) , Sodium Chloride (500G/Bottle) , Sodium Hypochlorite(5L/Can) , Sodium Sulphate (500G/Bottle) , Sulphuric Acid(2.5L/Bottle) , Thiosemicarbazide(100G/Bottle) , Trichloroacetic Acid (500G/Bottle) , Tris (500G/Bottle) , Trisodium Citrate(500G/Bottle) , Universal Indicator (Ph 4.0 -11.0) (500Ml/Bottle) , Urea (500G/Bottle) , Zinc Sulphate (500G/Bottle) , Micro Centrifuge Tubes - 1.5 Ml, 500/Pack , Micro Centrifuge Tubes - 2Ml, 500/Pack , Micro Slide (75Mm Long X 50Mm Wide) Thickness: 1.35 Mm(50 Pcs.Per Pack) , Micropipette Tips( 0.2 To 10 Ul) (500/ Pack) , Micropipette Tips(100 To 1000 Ul) (500/Pack) , Nitrile Gloves ( Medium ) (100/Pack) , Nitrile Gloves ( Small ) (100/Pack) , Ordinary Filter Paper 600 X 600 Mm(100Pcs.Per Pack) , Pcr Tubes (0,2 Ml ) With Caps ( Conical Bottom ) ( 100/Pack) , Ph Paper (Range 3.5-6.0) ( Pack Of 25 Leaves) , Ph Paper (Range 5.0-7.0) ( Pack Of 25 Leaves) , Ph Paper (Range 6.5-9.0) ( Pack Of 25 Leaves) , Plastic Pasteur Pipette(3 Ml) (500/Pack) , Plastic Storage Vial (Screw Type) (500/Pack) , Ria Vials Withcap ( 12 X 75 Mm) (500/Box) , Ria Vials Withoutcap ( 12 X 75 Mm) (500/Box) , Whatman No.1 Filter Paper600 X 600 Mm (100 Sheets/ Pack) , Non-Consumables Items Glassware, Plasticware And Miscellaneous: I , Adjustable Micropipette( 100 -1000 ?L )-Warranty 1 Year , Adjustable Micropipette(1 - 10 ?L)-Warranty 1 Year , Adjustable Micropipette(10- 200 ?L )-Warranty 1 Year , Adjustable Multichannel (8 Channels)Micropipette(30 -300 ?L )-Warranty 1 Year , Borosil Glass Pipette10.0Ml ( Graduated ) , Borosil Glass Pipette5.0Ml ( Graduated ) , Borosil Glass Test Tube (1.5X 15 Cm) (100/Box) , Falcon Tube – 15Ml (100 Tubes/Pack) , Funnel Plastic (3 Inch Dia With Long Stem) , Glass Stopper Bottle (125 Ml) , Glass Stopper Bottle (250 Ml) , Glass Stopper Bottle Amber Color (125 Ml) , Glass Stopper Bottle Amber Color (250 Ml) , Ice Bucket (2.5 L) (Polyurethane ) , Micropipette Stand ( 4 Places ) , Ph Meter – Pocket Size ( Warranty - 1 Year) , Plastic Micropipete Tips Boxfor Holding 0.2 To 10 Ultips , Plastic Micropipete Tips Boxfor Holding 10 To 200 Ultips , Plastic Micropipete Tips Boxfor Holding 100 To 1000Ultips , Plastic Sample Transport Container Of Size 450Mm*300Mm* 300Mm With Handle And Lid , Plastic Stand For Holding Glass Pipettes , Plastic Test Tube Rack (6 Holes & 6 Pins) To Hold 15X125 Mm Tubes , Plastic Test Tube Rack (6 Holes & 6 Pins) To Hold 25 X 150 Mm Tubes , 1645050-Power Pac Basic Power Supply With One Year Warranty From M/S Biorad For Use With Biorad 2D Gelelectrophoresis , Soda Glass Bottlewith Wide Mouth (500 Ml) , Stainless Steel Spatula , Test Tube Basket With Cover(L 180 X B 170 X H 160 Mm) , Test Tube Holder With Wooden Handle (Stainless Steel ) , Tourniquet Band (Latex Tube Rubber)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 14
Puducherry View Result →
14.
Agriculture #9379144 Technical Bid
Supply Commissioning And Installation Of Gc For N2o , Application: Greenhouse Gases I.E. N2o, Co2 And Ch4 Estimation From The Ambient Air And Soil Gases Samples Very Precisely Using Gc , Gc Mainframe: , Gas Chromatograph (Latest Model) With Head Space Sampler (Hss) Interface For Greenhouse Gases Analysis With Simultaneous Detection Of Greenhouse Gases In Air Samples Air Samples [E.G. Nitrous Oxide (N2o), Carbon Dioxide (Co2), Methane (Ch4)] With Suitable Columns And Provision For Automatic Injecting Sample Having The Following Lower And Upper Detection Limits , · Nitrous Oxide (N2o): = 30 Ppb To 10 Ppm (Mdl = 30 Ppb Or Better) , · Carbon Dioxide (Co2): 0.4 Ppm To 0.2% (Mdl = 0.4 Ppm Or Better) , · Methane (Ch4): 0.2 Ppm To 20% (Mdl = 0.2 Ppm Or Better) , Gas Chromatograph That Provides Superior Performance. , · It Have Easy Access To Maintenance And Service Modes System Interface. , · It Have Retention Time Repeatability <0.008 %; Area Repeatability <0.5 % Rsd. , · It Have Hands Free Leak Check And Retention Time Locking. , Column Oven , · Column Oven Can Accommodate Two Column With A Temperature Range From +5°C To 450 °C. , · Set Point Resolution Of 0.1 °C Or Better; , · Must Support Minimum 20 Ramps Or More; , · Maximum Temperature Ramp Rate Of 120 °C / Min Or Better. , · Oven Cool Down From 450 °C To 50 °C Must Be In 4 Min Or Less With Built-In Programmable Oven Cool Down Rate Readily Available To Cater For Columns Of Different Stability. , · Temperature Stability For < 0.01 °C For A 1 °C Ambient Change, Ensuring The Maintenance Of Oven Internal Temperature With Respect To External Fluctuations. , Column Selection: , · Employ A Column Specially Designed For Separating Nitrous Oxide (N2o) From Other Atmospheric Gases Such As A Porapak Q Or Molecular Sieve Column. , · Suitable Columns: 2 Numbers Each To Analyze The Greenhouse Gases. , Pressure/ Flow Control Pneumatics: , · Microprocessor Based Latest Version Gc (With Advanced Pneumatics, Msd Iso 9001 Certified With Large Graphical Lcd Display To View Chromatogram And Built In Gc System Check And Self-Diagnostic Function). , · System Must Have Epc/Afc/Ppc Control For All Injectors And Detectors With Single Point Control Via Software. , · It Must Have The Capability To Install Up To Eight Epc/Afc. , · Automatic Leak Testing, System Must Have Automatized Pneumatic Controls For All Gases Like Carrier Gas, Make Up Gas, Detector Gas, Etc. , · Pressure Set Point And Control Precision To 0.001 Psi. Pressure/Flow Ramps Must Be Minimum Three. , · Future Upgradability Should Be Possible For Other Detectors. , · Head Space Transfer Line Must Be Fully Integrated With Mainframe. , · Complete System Can Be Fully Controlled By Pc Software , · Carrier And Makeup Gas Must Be Selectable To He, N2, H2 And Argon/Methane. , · System Must Have Factory Fitted & Tested For Back Flushing & Column Switching/Changing Along With The System Software Acquires Chromatograms From All The Detectors Simultaneously With One Injection Only. , Auto Sampler: , Head Space Sampler (Hss): , • Typical Area Repeatability <0.7% Rsd. , • Typical Carryover <0.0001%. , • Auto Injector Must Be With Minimum 48 Vials Capacity Or More. , • Overlapping Up To 12 Vials To Maximize Throughput Or Better. , • Multiple Headspace Extraction Mode With Minimum 100 Extractions Per Vial Or More. , • In-Build Vial Shaker. , • Gc Column Selection From 50 To 530 ?M. , • Compatibility With Headspace Vials Of 10 Ml, 20 Ml, And 22 Ml Sizes With Unrestricted Use Of Different Vial Sizes Within A Single Sequence. , • All Temperature Zones (Oven, Valve And Loop, Transfer Line) Have Set-Point Increments In 1 °C With 0.1 °C Resolution For Actual Temperatures. , • Oven Temperature: Ambient +5 °C To 300 °C Or Better , • Valve And Loop Temperature: Ambient +5 °C To 300 °C Or Better , • Transfer Line Temperature: Ambient +5 °C To 300 °C Or Better , • Vial Pressurization Must Be Fully Controlled By The Included Epc/Afc/Ppc. , • Pressure Setpoints Must Be Adjusted By Increments Of 0.001 Psi. , • Flow Setpoints Must Be Adjusted By Increments Of 0.01 Ml/Min. , • Separate Injector Unit For Headspace Sampler , • Should Have A Closed Sampling Design Without Exposure To Atmosphere Or Ambient Temperature. System Must Be Syringeless To Avoid Exposure To Atmosphere/Contamination. System Must Be Controllable Through Software Only. , • Headspace Should Have Automatic Leak Check, Power Saving And Gas Saving Facility. , Browse Interface: , · Touchscreen Browser Interface , · Mobile Access Features/ Remote Control , Upgradability: Quoted Gc Must Be Upgradable With Single/Triple/Qtof/ Quadruple Mass Spectrometer In Future. , Valves And Catalyst: , Suitable Automatic Gas Sampling Valves, Column Switching Valves & Injecting To Column For Desired Gas Analysis. All Gas Control Should Be Epc/Iec/Afc. , • Gas Sampling Valve-1 , • Column Isolation Valve-1 , • Other Valve-2 , • Nickle Catalyst-1 , Injector , · Multi-Port Gas Sampling Valve With Auto Injector Facility From Tedlar Bag Or Gas Tight Syringe And Manual Gas Sample Injecting Facility Should Be There. , · Suitable Injector For Headspace , Detectors : , Flame Ionization Detector (Fid): , · Minimum Detectable Level (For Tridecane): <1.2 Pg C/S Or Better , · Minimum Temperature Should Be 450 °C Or More. , · Linear Dynamic Range >107 Or Better , · Data Rates Up To 1,000 Hz Or Better. , · Must Have The Flameout Detection And Automatic Reignition Capability. , · Fid With Methanizer, Detector Must Be Compatible With All Colums: Packed, Capillary And Molecular , · Able To Control Up To 3 Channels Of Gas, I.E. H2, Make-Up And Air (With Electronic On/Off). The Control Range Are To Be For Air: 0-500 Ml/Min, H2: 0-100 Ml/Min, And Make Up Gas (N2 Or He): 0-50/ 100 Ml/Min. , Electron Capture Detector (Ecd): , · Minimum Detectable Level: <3.8 Fg/Ml Lindane Or Better , · Minimum Temperature Should Be 400 °C Or Better. , · Linear Dynamic Range >5 × 104 With Lindane Or Better , · Data Rates Up To 500 Hz Or Better. Detector Must Be Compatible With All Columns: Packed, Capillary And Molecular , · Able To Supply A Constant Flow Make-Up Gas (N2 Or Ar) For The Inertness Of Ecd Chamber With Flow Control Of 0-200 Ml/Min. , Customizable Specifications: , · Manual Gas Sample Injecting Facility Should Be There. , Data Management And Acquisition System (Pc & Printer): , · Latest Branded Pc With Licensed Ms Office Package, Antivirus, Compatible Pc For Software , · Intel Core I5 Processor, 3Ghz Or Better , · 8.0Gb Ddr Ram Or More , · 1 Tb Hard Disk Storage, 128 Gb Ssd Or More , · At Least 24” Lcd Monitor , · Latest Window Operating System (Professional-10/11) , · At Least 3/4 Lan And 4/5 Usb Port Availability Or Better , · Wireless Keyboard & Mouse , · Laserjet Black & White Printer , Software System: , · Latest Operating System Compatible Workstation, Original Window-Based Licensed Software From The Same Manufacture Only Which Includes Complete Gc Control, Multi-Channel Real Time Chromatographic Data Acquisition And Post-Run Analysis. , · It Should Also Include High Speed Data Acquisition And Bulk Analysis Compatibility, Full Qualitative & Quantitative Processing Functions, Multi-Function Compatibility, Audit Trail, Validation Assistant, System Suitability, Qa/Qc Functions, All-In-One File Configuration For Easy Data Transfer, Customized Report Generator, Networking Capability, Data Management Etc. , · Software Performing Data Analyses At Least As Per Din/Iso/Us-Epa, Calibration, Blank Correction, Data Import, Export, Handling And Reporting, Quality Control Protocols, Computer Based Training. , Necessary Consumables/Accessories: , • Headspace Vials With Caps, Septa And Storage Box (20 Ml)- 200 Quantity , • Headspace Vial Crimper- 1 Quantity (Electronic Which Has Rechargeable Battery Along With Acessories) , • Headspace Vial Decapper- 1 Quantity (Electronic Which Has Rechargeable Battery Along With Acessories) , • Nickel Catalyst (1 Quantity); Tedler Bags (10 Nos) , • A Vial Evacuation System To Evacuate = 10 Sample Vials At A Time. , • Fid Jet- 1 Quantity , • Greenhouse Gas Checkout Sample-1 Quantity , • 12Ft 1/8 2Mm Hayesep Q 80/100 Um- 1 Quantity , • 6Ft 1/8 2Mm Hayesep Q 80/100 Um- 1 Quantity , • Fused Silica Column Deactivated -0.530Mm X 1M- 1 Quantity , • A Purging System To Purge The Vial/Tedlar Bags. , • Hdspc Al Sfty Crmp Cap, Ptfesi, 20 Mm, 100 Pk , • 20Mm Silver Alum Safety Crimp Cap 100 Pk (01 No.) , • 20Mm Tan Ptfe/White Silicone Septa, 100 Pk (1 No.) , • Vial, Hs, Screw, 20 Ml, Clr, 100Pk (01 Nos) , • Hdsp Cap 18 Mm Magnetic Ptfe/Silicone Septa 100Pk (05 Nos) , • Vial, Hs, Crimp, Fb, 20 Ml, Clr, Cert, 100Pk (01 Nos) , • Ergonomic Manual Crimper For 20Mm Caps (01 No.) , • Ergonomic Manual Decapper For 20Mm Caps (01 No.) , • Gastight Syringes (Ptfe Lucerlock With Needle) Of 500 ?L And 1000 ?L (1 Nos Each) , • Gastight Syringes (Ptfe Luerlok Syringe) Of 25 Ml And 50 Ml (1 Nos Each) Along With Three Needles With Each Syringe. , · Calibration Gas Cylinders: -Calibration Gas Cylinders (10 L Each) Along With Double Stage Ss Regulators For Each Cylinder With Below Concentrations: , N2o (Ppb)Co2 (Ppm)Ch4 (Ppm) Cylinder 1100350 1.5 Cylinder 23001000 6.0 Cylinder 3 1000 20001000.0 , Accessories For Gc Operation: , Gas Cylinders: , • Complete Gas Supply System With 47L Capacity Gas Cylinders For Each Of H2, H2, Zero Air And Ar (95%) + Ch4 (5%) Gas Mixture. , • Hydrogen Gas Cylinder With Gas Purification Panel And Double Stage Regulator- 1 Quantity , • Nitrogen Gas Cylinder With Gas Purification Panel And Double Stage Regulator- 1 Quantity , • Zero Air Gas Cylinder With Gas Purification Panel And Double Stage Regulator- 1 Quantity , • 5% Ch4 In 95% Argon Cylinder For ?Ecd Makeup Gas , • Double/Single Stage Gas Regulators And Gas Purification Pane; With Complete Tubing And Gas Regulation System For All 4-Gases: H2, H2, Zero Air And Ar (95%) + Ch4 (5%) Gas Mixture. , Ups: Branded Compatible Online Ups Of 5Kva With 30 Min. Backup Or Better. , Air Conditioner (Ac): Branded 1.5 Ton Split Ac With Timer , Power Requirement: 220/240 Volt; 50/60 Hz , Warranty: , · Onsite Warranty One Year On Instrument Including Pc, Printer And Ups. , Safety & Regulatory Certificate: , · The System Should Accompanied With Conformity Certificate. , · Quoted Model System Should Be Latest With Good After Sales Support And Should Have Iso 9001 Approval Certificate. Model Must Be Iso/Ce Certificate Or Other Relevant Certificate. , Pre-Installation Requirements All The Necessary Pre-Installation Requisites Required For The Complete Installation Of The System. , Note: , 1. Original Brochure Of The Quoted Model Should Be Submitted. Specification Claimed For Each Component Must Be Supported By Printed Literature Of The Company. The Submitted Printed Literature Must Also Be Available On The Oem Website For Cross-Checking The Specifications And Its Compliances. , 2. Country Of Origin And Manufacture Should Be Mentioned. , 3. Quoted Model Must Be Factory Fitted With Valves, Column & Detector And Tested For Greenhouse Gas And Trace Gas Analysis , 4. Offered Specs Should Be Mentioned In The Original Detailed Technical Catalogue Of The Quoted Model. , 5. Original Brochure Of The Firm To Be Supplied And Same Should Be Reflected In The Website Of The Firm. , 6. Provide Compliance Statement Sheet With Technical Bid And If There Is Any Deviation In Above Mentioned Specifications Should Be Clearly Highlighted In Remarks. , 7. Quoted Model System Should Be Latest With Good After Sales Support And Should Have Iso 9001 Approval. , 8. Entire System Should Be Provided Directly By The Manufacturer And In No Case Local Components Will Be Accepted Except Laser Printer, Pc And Ups Which Can Be Provided From Local Sources. Technical Bids With Compatible Modules From Another Manufacturer Will Not Be Evaluated. , 9. Minimum 10 Installations Of Quoted Model In National R&D Institutions For The Past 5 Years With Supporting Documents Of Purchase Orders/Latest Service Reports/Installation Reports To Be Enclosed. , 10. Original Software For The Equipment Should Be Provided And Free Up-Gradation Of Software During The Warranty Period. , 11. Performance Certificates Of The Quoted Model To Be Attached , 12. Anything Extra Required For Installation Should Be Quoted Along With Instrument. , 13. Warranty And Maintenance , A) The Complete Instrument Should Be Under Warranty At Least For A Period Of One Year From The Date Of Installation. , B) In Case Of Breakdown During The Warranty Period, A Competent Service Engineer Of The Supplier Should Make As Many Visits As Are Necessary To Rectify The Problem And Replace The Faulty Parts, Without Any Liability Of Cost. But It Should Be Repaired Within 72 Working Hours From The Date And Time Of Complaint Lodged By The User. , C) Annual Maintenance Contract (Amc) And Comprehensive Maintenance Contract (Cmc) Quote The Cost Of Onsite Annual Maintenance For At-Least Three Years After Warranty Period (Optional). , 14. Spare Parts The Supplier Of The Instrument Must Confirm In Writing That The Spares For The Entire Instrument Will Be Available For A Period Of At Least 7-10 Years After The Model Of Equipment Supplied Has Been Phased Out. For Frequently Required Spares, There Should Be Adequate Inventory With The Indian Agency. , 15. List Of Service Staffs And Centers Available In India. , 16. On-Site Installation Should Be Provided Free Of Cost. Onsite Training/Demonstration To The Scientists To Be Provided At No Additional Cost. , 17. Manual: One Set Of Operating Manual And Service Manual Including Detailed Drawings And Circuit Diagrams (In English) Should Be Provided With The Instrument. , Quotations Should Be Complete In All Respects At First Instance; Incomplete Quotations And Quotation Of Firms, Who Merely Cut Paste Specifications From Tender Document Are Liable To Rejection. , Gst, If Applicable , Other Charges , Total Bid Price Including All Taxes And Other Charges , (Total Bid Price In Rupees(In Figures)----------------------------------- , (In Words)---------------------------------------------------------------------------------- , Signature Of Bidder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Rajasthan View Result →
15.
Educational and Research Institute #9369073 Technical Bid
To carry out the Detailed Energy Audit, Electrical safety Audit, Power Quality Audit & Solar Power Plant Audit etc., atSant Gadge Baba Amravati University Campus, Amravati, as per the given scope of work
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Maharashtra View Result →
16.
Housing Urban and Rular Development #9342103 Technical Bid
Construction And Installation Of Various Items For Government Buildings, In The State Of Goa To Create Barrier- Free Environment For Persons With Disabilities (South Goa).-SS Studs with carborundum insert of approved colour Providing and fixing SS-304 studs of the approved brand and make, having 35mm dia. and 5mm thickness and a 12 mm long cylindrical plug of 7mm dia. at the centre of the rear side of the stud and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 2 SS Strips with carborundum insert of approved colour Providing and fixing SS-304 strips of the approved brand and make, of size 280mm x 35mm and 5mm thickness and having minimum 3 nos. 12 mm long cylindrical plugs having 7mm dia. located on the rear side of the strip and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 3 PU Warning Tiles :Providing and fixing in place 300 mm x 300 mm polyurethane stick on tactilewarning tiles with provision for screwing at corenrs with matching colour screw cap , having beveled edges and tactile elements protruding by 5mm from the base of the tile. The tiles should be of the approved brand, make and colour and be fixed inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and as per the installation instructionsgiven by the manufacturer complete 4 PU Directional tiles Polyurethane stripsof Barrierfree/ equivalent brand of size 300 mm x 300 mm and 5mm thickness with proision for screwing at 4 corners with matching colour cap. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner)/proprietary self adhesive tape including finishing work up to the satisfaction of the engineer in charge complete. 5 Providing a S.S. 304 SWING GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm, of the approved brand and make and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 6 ProvidingS.S. 304 L SHAPED GRAB BAR of SIZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness 1.5mm, of the approved brand and make andto be installed at the specified location as per accessibility standards and to be fixed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware as per the direction of the engineer in charge 7 Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm, of the approved brand and make, to be installed vertically at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 8 Parking Signage Design, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the Universal Accessibility Symbol and Upper case Sans Serif words ofheight 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm.Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge. 9 Building entrance and Accessible entrance signage Design, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the Universal Accessibility Symbol and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 10 Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuildinglayout of size 2ft x 1.5ft min., of the approved design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of height not less than 12mm, with the equivalent word/s written in Hindi with acrylic cut out Devnagri letters of height not less than 12mm,raised 1 to 2mm above base plate and of the approved colour such that there is adequate visual contrast with the base plate. A multilingual audio indicating the names of the relevant spaces to be triggered on pressing the respective button. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 11 Overhanging directional signage Design, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 12 Overhanging directional signage Design, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 13 Floor Directories with tactile letters Providing and fixing acrylic multilingual Braille (raised domes) floor directories on all floors of size 1.5 ft x 2 ft , showing the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having Base plate: 4mm thick blue/ approved colour acrylic non glare Text: Upper Case San Serif words made of white acrylic non glare cut out letters of height 20mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 20mm raised 0.8mm above base plate. Symbols: Signage to have relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Arrows: Signage to have arrows pointing in the relevant direction made of cut out acrylic and raised by 3mm min. above base plate Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Braille: Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 14 Emergency Evacuation signage (6 x 9 format) Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 emergency exits and evacuation instructions, designed as per the drawings issued and having 4mm thick green/red acrylic non glare base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height not less than 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height not less than 15mm raised 0.8mm above base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 15 FIRE ORDER Design, supply, fabrication and fixingmultilingual FIRE ORDER signage of size 700mm x 900mm made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet. Signage giving evacuation instructions during fire using black/ red/ green non glareUpper Case Sans Serif words of height not less than 15mm and the equivalent translation written in Hindi using Devnagri non glare black letters of height not less than 15mm , designed as per the drawings issued. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 16 Emergency evacuation map:photoluminiscent Providing and installing an Emergency evacuation map of each floor indicating the current position of the viewer saying YOU ARE HERE of 15mm high letters in red/ green /black with white background, indicating the emergency exits, locations of fire extinguishers etc.Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters not less than 3/4 in height. The size of the board shall be 2ft x 2ft made out of Ecosolvent self adhesive,reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet, complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand shall be oriented to the position of the viewer up to the satisfaction of the engineer in charge. 17 Photoluminescent Fire exit and floor identification signage with Braille: PHOTOLUMINISCENT Fire Exit and floor identification signage of size 400 x 100mm min. made out of computer cut opaque, non reflective, self adhesive vinyle letters, pasted on a self adhesive photoluminiscent film, pasted on 3mm thick PVC foam sheet, having a 2mm acrylic baseplate. Braille strip comprising of Acrylic base plate and PVC rasters to be provide below the signage. Signage to be of the approved colour with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand up to the satisfaction of the engineer in charge. 18 Anodised Aluminium Braille indicators with SS-304 cable fasteners for handrails Providing and fixing 0.5 mm thick Anodised Aluminiumpre rolled signs of size 100mm x 80mm to fit any handrail circumference with hygeinically clean pressed aluminium with no add ons that can be picked off or removed and having the required word written in Grade 1 Braille (raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI) raised by 0.6mm to 0.9mm above base plate. To be installed in place around the handrail using SS-304 cable ties of dimension 7.9mm x 200mm with press fit mechanism. 19 Providing a folding wheelchair of the approved brand and make having chrome steel finish, fixed arm and footrest, solid castor front wheel of 8 dia and rear pneumatic mag wheel of 24 dia, self weight of 17.4 kg and load bearing capacity of 150 kg . Seat width of 16 and overall wheelchair width 24 and 25mm pipe dia. 20 Providing a emergency evacuation chair of approved brand ( Resguardo or equivalent )with a self weight of 16.5 kg and load bearing capacity of 130 kg. The frame of the chair to be made of aluminium powder coated sections of 32 mm outer dis and 3 mm thickness. 21 Door signage : 6 x 3 format (without symbols, without text, only Braille) Design, supply, fabrication and fixing acrylicBraille (raised domes) signboards of size 6x 3 for room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 22 Conducting post implementation access audit and submission of post implementation report certified by Access Auditor empanelled under Accessible India Campaign by Ministry of Social Justice and Empowerment, Govt. Of India . The Post implementation access audit report shall comply with the report format under AIC and demonstrate the measures adopted for accessibily of the building which has been retrofitted through sufficient photographic evidences as deemed necessary. 23 Providing and Fixing in position in custom sizes accessible railing system as per design mandated under accessibility norms, fabricated out of modular and non modular components made of Stainless Steel Grade 304. Railing system to be fabricated out of SS pipe of 38 to 50 mm dia for horizontal supports of 16 gauge thickness at two levels of 760 mm and 900 mm with adequte vertical and horizontal supports for stability and safety of persons with disabilities. 24 Modular Unisex Accessible Toilet : Providing and installing in position a prefabricated modular unisex accessible toilet unit of size 2200 x 2100 mm as per accessibility norms fabricated out of SS, GI framing and panelling surfaces along with ACP exterior surafce as per manufacturers specifications inclding all service lines for water supply and drainage. ech Specifications for Prefabricated Accessible Toilet in India 1. Structure: Frame: GI (Galvanized Iron), powder-coated for durability, 2mm thickness.Cladding: ACP (Aluminum Composite Panel), 3mm thickness, weather-resistant, available in matte, glossy, or wood finishes. 2. Flooring: Anti-slip vinyl or rubber flooring (3mm thickness), water-resistant, slip-resistant, and easy to clean. 3. Roof: ACP or insulated roofing panels, weather-resistant, soundproof, and thermal-insulated. 4. Doors & Windows: Doors: Minimum 900mm width for wheelchair accessibility. Windows: Frosted glass for privacy, small, strategically placed. 5. Accessibility Features: Interior Layout: 1500mm turning radius, wheelchair-friendly. Grab Bars: Stainless steel or powder-coated at appropriate heights. Toilet Seat: Accessible height (450-480mm) with side armrests. Shower Area (Optional): Foldable seat, handheld shower. 25 6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light. 26 7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures. Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m). 27 8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance. 28 9. Sustainability: Eco-friendly, recyclable materials. Energy-efficient features (LED lights, water-saving fixtures). Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors. 29 Providing and installing on all floors a building an audio navigational and wayfinding system of Disha / Iwayplus brand or equivalent based on BLE Beacons and custom app for use on smart phones, integrated with QR codes in designated locations enabled with AR/VR technology as per manufacturers specifications.Cost to include generation of CAD files for as built layouts of all structures. 30 Accessible Modular Ramp : Providing and installing on designatedlocation as per the directions of Engineer In Charge a customised modular ramp of gradient 1:12 gradient 1. Structure: Frame & Support: Fabricated from stainless steel for corrosion resistance and durability, ensuring rust-free performance. Surface: Aluminum components for lightweight, strength, and resistance to corrosion. Design: Modular design for easy installation and adjustments, ensuring flexibility in various environments. 2. Ramp Dimensions: Slope: Compliance with accessibility norms – a maximum slope ratio of 1:12 (1 part rise to 12 parts horizontal run). Width: Minimum 900mm to accommodate wheelchairs and mobility devices. Height: Customizable based on the locations requirements (e.g., 1000mm to 1500mm rise). Clearance: A minimum of 150mm clearance at the lowest point. 31 3. Safety Features: Handrails: Stainless steel handrails on both sides, 900mm to 1100mm in height, providing support and stability. Edge Protection: Raised edges (50mm-75mm) on both sides to prevent accidental slipping. Surface Texture: Anti-slip surface treatment on the ramp and handrails for added grip in wet conditions. 32 4. Weather Protection: Cover: A weatherproof cover (e.g., PVC or UV-resistant fabric) to protect the ramp from rain, ensuring its longevity and usability in all weather conditions. Drainage: Integrated drainage system or slotted surface to prevent water pooling. 33 5. Materials & Finish: Material: High-quality stainless steel for the frame, aluminum for surface components. Finish: Powder-coated or brushed stainless steel for a modern aesthetic and added corrosion resistance. Durability: All materials are rust-resistant, ensuring long-term functionality, even in coastal or humid areas. 34 6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light. 35 7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures. Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m). 36 8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance. 37 9. Sustainability: Eco-friendly, recyclable materials. Energy-efficient features (LED lights, water-saving fixtures). Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors 38 roviding a Accessible Help desk manufactured in adherence to accessibility norms made out of 18 mm ply and all surafces finished with solid surface of Corian or equivalent material with all edges rounded and or champfered to avoid sharp edge hazard to any person with disability ( Visual impairment, blood disorders) as per standrad drawing issued by access consultant 39 Supplying a Stair Climber Wheelchair as per manufacturers specifications and accessibility norms Type of stair climbing / descending : Battery operated Movement on flat ground : self operated by manual push as well as attendant Net weight /gross weight : 40kg / 51kg Required turning radius on staircase : 40×40 inches / 1×1 meter Battery voltage : 24 V Stair climber motor : 120 W Power motor : n/a Max load : 125kg Optimum stair angle : 35 deg Motor out put voltage : 20-29.4 V Battery charging voltage :110-240 V
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Goa View Result →
17.
Public Administrative Department #9339069 Technical Bid
E Tender For The Furnishing Works At Ernakulam , E-Tender For The Furnishing Works At Ernakulam , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Cabin Table With Side Storage-Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. *Second Floor Audit Officer , Accounts Officer ,Pa To Secretary & Ca To Secretary Room Table:A) Table Size: 1800Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Second Floor Additional Secretary & Secretary Cabin Table:B)Table Size: 2100Mm L X 1200Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. , Counter Table With Side Storage *Second Floor Superindent Counter Table:Executive Table With Privacy Partition Size: A)Table Size: 1500Mm L X 750Mm D X 750Mm Ht.Side Storage: 900Mm L X 450Mm D X 750Mm Ht , *Second Floor Pd/General Section Counter Table:B) Table Size:1500Mm L X 750Mm D X 750Mm Ht.Side Storage: 900Mm L X 450Mm D X 750Mm Ht. , Pedestal With Single Drawer And Shutter ( For Workstations) Size : 400Mm L X 450Mm D X 650Mm Ht.Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage-Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Issue. , Storage-Size : 1500Mm L X 450Mm D X 750Mm Ht. Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Conference Table With 02 Nos Of Pop Up Box ( 8 Module Without Switch &Socket)Size : 4800Mm L X 1200Mm D X 750Mm Ht. (2 Pieces Of 2400Mm Joined Together) * Table Top - Made Of 16Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) Edges In Double Thick Finished With 2Mm Thick Pvc Edge Binding Matching With The Laminate Shade.* Understructure – Box Type Legs Made Of 16 Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) , Office Atndr Room Table With Side Storage-Table Size : 3370Mm L X 450Mm D X 750Mm Ht. (2 Pieces Of 169Mm Joined Together)Side Storage Size : 3370Mm L X 450Mm D X 750Mm Ht. (2 Pieces Of 169Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Bindingb)Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Dinning Room Table- Second Floor 4 Seater Dinningtabletable Size : 4420Mm L X 700Mm D X 750Mm Ht. (2 Pieces Of 2210Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Second Floor2 Seater Dinning Tabletable Size : 700Mm L X 700Mm D X 750Mm Ht.A) Table Top - 25Mm Thick Pre-Lam-Particle Board With Pvc Edge Binding. B)Understructure - Box Type Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Waiting Area Counter Table-Table Size : 1930Mm L X 400Mm D X 750Mm Ht.A) Table Top - 25Mm Thick Pre-Lam-Particle Board With Pvc Edge Binding. B)Understructure - Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Providing And Supplying Of Encardo 3Str Dimensions W X H X D (Cm) - 179 X 85 X 83.5 Finish Color - Cappuccino Net Weight (Kg) - 85 Primary Material - Solid Wood Upholstery Material - Leatherette Seat Height (Cm) - 55 Warranty - 1 Year Style - Contemporary & Modern Delivery Condition - Knock Down , Providing And Supplying Of Encardo 2Str Dimensions W X H X D (Cm) - 125 X 85 X 83.5 Thickness Of Plywood Used(Mm) : 12 Mm Leg Material: * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms + Chrome Plating / Ss) :-Wooden Hanlde Is The Leg Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Pine Wood Seat Height (Cm) - 47 Warranty - 1 Year , Providing, Supplying And Placing Of High Back Chair.Seat/Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (W) X 49.2 Cm. (D) Back Size : 47.5 Cm. (W) X 77 Cm. (D) Armrests: The Armrest Top Should Bemoulded From Polyurethane(Pu), Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Beconnected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene. Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. , Conference Hall Chair-Providing, Supplying And Placing Of Mid Back Chair. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D) Mid Back Size: 47.7 Cm. (W) X 60.1 Cm. (D) Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support : Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment : The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height -43.1-53.1Cm Height -96.5-114.0.Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Counter Table With Side Storage & With L Type Partition*Third Floor Superindent Counter Table: Modular Partition: 1500/1500Mm L X 50Mm D X 1050Mm Ht.Table Size : 1500Mm L X 750Mm D X 750Mm Ht.Side Storage Size : 900Mm L X 450Mm D X 750Mm Ht.) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Cabin Table With Side Storage-*Third Floor Deputy Secretary Office Table, Revenue Office Table, Pb, Cho-1,Hs-1 Cabin Table:) Table Size: 1800Mm L X 750Mm D X 750Mm Ht.Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Counter Table With Side Storage-*Third Floor It Work Station Table , Atndr At Deputy Secretary &Pb Cabin & Propery Tax Workstation:A)Table Size: 1500Mm L X 600Mm D X 750Mm Ht.Side Storage: 900Mm L X 450Mm D X 750Mm Httable Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Pedestal With Single Drawer And Shutter ( For Workstations)Size : 400Mm L X 450Mm D X 650Mm Ht.Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage -Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Issue. , Storage-Size : 1500Mm L X 450Mm D X 750Mm Ht. Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Office Atndr Table Office Atndr Table-Third Floor Atndr Office Room Table 1Table Size : 4670Mm L X 500Mm D X 750Mm Ht. (3 Pieces Of 1560Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 2-Table Size : 1750Mm L X 500Mm D X 750Mm Ht.A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 3 ( Revenue, Ri Office)Table Size : 2800Mm L X 500Mm D X 750Mm Ht ( 2 Pieces Of 1400Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 3 ( Property Tax)Table Size : 5580Mm L X 500Mm D X 750Mm Ht. (3 Pieces Of 1860Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 4( Revenue Non Tax)Table Size : 2500Mm L X 500Mm D X 750Mm Ht. (2 Pieces Of 1250Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 4( Revenue Non Tax) Table Size : 3600Mm L X 500Mm D X 750Mm Ht. (2 Pieces Of 1810Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Cashier Counetr Table-Third Floor Waiting Area Cashier Counter Tabletable Size : 1200Mm L X 400Mm D X 750Mm Ht. A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Dinning Room Table- Table1 Size : 2400Mm L X 750Mm D X 750Mm Ht.)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Dinning Room Table-Table2size : 700Mm L X 700Mm D X 750Mm Ht.Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. , Providing, Supplying And Placing Of Boltless Shelving System Of Height 2100Mm, Length 1300Mm & Depth 500Mm With 6 Panels. Upright Is Roll-Formed Construction Made Up Of Single Piece Having Slots At 25Mm Pitch Upright Typeupright G50 Profile Width 50 Mm Profile Depth 37 Mm No Of Pieces Single Panel Adjustability 25 Mm Material Quality Min Ys=210 Mpa Mfg Process Roll Forming Finish Powder Coated Colour Oxford Blue Bracingis Formed Single Piece Section Which Connects Two Vertical Uprights & Makes A Frame Bracing Type Battened Type Section Flat With Edge Hem Bend And Middle Rib Material Thickness 1.2Mm Mfg Process Press Brake Forming Connectivity Hooking & Pin Assembly No Of Fasteners 2 Nos Of M6x10 Plastic Rivet Pin Surface Finish Galvanized Base Plate G50 Base Are Used To Transfer The Upright Load Into Ground & Also Act As A Connecting Member Between Ground & Upright. Width 64Mm Depth 60Mm Thickness 2.0Mm Connectivity Grouting No Of Anchor Bolt 1 No Of M8x51 Fastener Type Coach Bolt No Of Fasteners To Connect Upright 1 No Of M6x15 Fastener Type Hex. Bolt & Nut Mfg. Process Press Forming Finish Galvanized Shelf Panels Are The Load Carrying Members Which Are Hooked Into The Uprights Via Shelf Clips. ‘4’ Nos. Of Clips Are Used Per Panel. Width 1300 Mm In 50 Pitch. Depth 300 To 600Mm In 50 Pitch. Thickness 0.8 Mm Range Where Panel Cannot Be Offered Refer Shelf Panel Load Chart Height 32Mm No Of Bends 14 Sharp Edges No Sharp Edges Mfg. Process Roll Formed Usage Decking Surface Fasteners No Divider Adjustability 50Mm Mounting Using ‘4’ Nos. Of Shelf Clips Surface Finish Galvanized Shelf Clip Shelf Panels Are Mounted Using This Shelf Clips. Profile Section 70 X 17 X 12Mm Material Thickness 2.3Mm Mfg. Process Blanking & Punching No Of Bend 2 Connectivity Insertion Surface Finish Galvanized Back Ties Are The Critical Members In Ensuring Stability. Usage Stability Dia. Of Tie Rod 5Mm Size Of Turn Buckle 90Mm Connectivity – Tie Rod Cleat Hooking Fasteners ‘1’ No Of Plastic Rivet Pin / Cleat Mfg. Process – Tie Rod Bending Surface Finish Galvanized , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Superindent Table With Side Storage And With L Type Partition *Fourth Floor Superindent Counter Table:Modular Partition: 1500/1500Mm L X 50Mm D X 1050Mm Ht.Table Size : 1800Mm L X 750Mm D X 750Mm Ht.A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Cabin Table With Side Storage- *Fourth Floor Supdt Engineer Cabin Table:Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding.*Fourth Floor Supdt Engineer Cabin Table:A) Table Size: 2100Mm L X 120Mm D X 750Mm Ht.Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Fourth Floor Asst-Executive Engr 1&2 & Exe-Engr 1&2 Cabin Table:B)Table Size: 1800Mm L X 1200Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Fouth Floor Asst-Engr 3,4&5 Cabin Table:D) Table Size: 1800Mm L X 71200Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Fouth Floor Hd-1 & Hd-2 Cabin Table:E) Table Size: 1600Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , Pedestal With Single Drawer And Shutter ( For Workstations)Size : 400Mm L X 450Mm D X 650Mm Ht. Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage -Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Iss , Storage Size : 1500Mm L X 450Mm D X 750Mm Ht.Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Conference Hall &Union Office Table With 02 Nos Of Pop Up Box ( 8 Module Without Switch &Socket)Size : 4800Mm L X 1200Mm D X 750Mm Ht. (2 Pieces Of 2400Mm Joined Together)* Table Top - Made Of 16Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) Edges In Double Thick Finished With 2Mm Thick Pvc Edge Binding Matching With The Laminate Shade.* Understructure – Box Type Legs Made Of 16 Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) , Town Planning Dept & Engineerind Dept. Atndr & Printer Counter Tabletable Size : 2000Mm L X 600Mm D X 750Mm Ht. A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Dinning Room Table Table Size : 1650Mm L X 700Mm D X 750Mm Ht. A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Ee-Additional Secretaryroom:Supplying And Placing In Position Main Table,Eru & Pedestal Of The Following Specifications. 2100X2250x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Supplying And Placing In Position Main Table,Eru & Pedestal Of The Following Specifications. 2100X2250x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Providing And Supplying Of Encardo 3Str Dimensions W X H X D (Cm) - 179 X 85 X 83.5 Finish Color - Cappuccino Net Weight (Kg) - 85 Primary Material - Solid Wood Upholstery Material - Leatherette Seat Height (Cm) - 55 Warranty - 1 Year Style - Contemporary & Modern Delivery Condition - Knock Down , Providing And Supplying Of Encardo 2Str Dimensions W X H X D (Cm) - 125 X 85 X 83.5 Thickness Of Plywood Used(Mm) : 12 Mm Leg Material: * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms + Chrome Plating / Ss) :-Wooden Hanlde Is The Leg Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Pine Wood Seat Height (Cm) - 47 Warranty - 1 Year , Exicutive High Backrevolving Chairproviding & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift And Multifunctional Mechanism ) , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). , Providing, Supplying And Placing Of Mid Back Chair. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. , Providing, Supplying And Placing Of Boltless Shelving System Of Height 2100Mm, Length 1300Mm & Depth 500Mm With 6 Panels. Upright Is Roll-Formed Construction Made Up Of Single Piece Having Slots At 25Mm Pitch Upright Typeupright G50 Profile Width 50 Mm Profile Depth 37 Mm No Of Pieces Single Panel Adjustability 25 Mm Material Quality Min Ys=210 Mpa Mfg Process Roll Forming Finish Powder Coated Colour Oxford Blue Bracingis Formed Single Piece Section Which Connects Two Vertical Uprights & Makes A Frame , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Superintendent Table & Vehicle Cell Cabin Table With Side Storage Fifth Floor Superindent & Vehicle Cabin Table: Table Size : 1500Mm L X 750Mm D X 750Mm Ht. Side Storage Size : 900Mm L X 450Mm D X 750Mm Ht. * Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. * Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Cabin Table With Side Storage Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding.Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. *Fifth Floor Kudumbasree Meeting Room & Cabin Table:B)Table Size: 1500Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , Typing Pool Workstation Table Size: 1500Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Planning Cell Atndr Table Table Size: 2300Mm L X 500Mm D X 750Mm Ht. Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Pedestal With Single Drawer And Shutter ( For Workstations) Size : 400Mm L X 450Mm D X 650Mm Ht.Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage -Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Iss , Storage Size : 1500Mm L X 450Mm D X 750Mm Ht.Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Conference Table With 02 Nos Of Pop Up Box ( 8 Module Without Switch &Socket)Size : 4800Mm L X 1200Mm D X 750Mm Ht. (2 Pieces Of 2400Mm Joined Together) * Table Top - Made Of 16Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) Edges In Double , Dinning Room Table Tablesize : 700Mm L X 700Mm D X 750Mm Ht.. ) Table Top - 25Mm Thick Pre-Lam-Particle Board With Pvc Edge Binding. B)Understructure - Box Type Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Kerala View Result →
18.
Power #8976135 Technical Bid
Shifting Of 11 Kv And Lt Line From Unchapul Bypass To Choufula Choraha Against Head Depsoit Under Edd Haldwani Rural, Upcl-2 Ac Voltage Tester 3 Stop Watch 4 Digital Multimeter 6.5 Digits 5 Lux Meter 6 Noise ( Db ) Meter 7 Gauss Meter 8 Digital Earth Resistance Tester 9 Atmospheric Pressure Measurement Unit 10 Power Quality Analyzer 11 Thermo Hygro Meter 12 Anti Static Mat On Floor / Table ( 2Mtr X 1Mtr X 3Mm ) 13 Almirah For Nabl Documentation 14 Apron, Gloves & Wrist Band ( I Set ) 15 Providing Consultancy Services As Per Iso 13779 / 14697 ( Including Required Training , Support For Documentation And Internal Auditing And Nabl Audit ) For Successfully Obtaining Nabl Accreditation Certificate For Electronic Test Bench Lab Upcl For Routine And Acceptance Testing Of Single & Three Phase Energy Meters 16 Annual Calibration Of Laboratory Equipment As Per Nabl 17 Servicing Staff : Helper / Iti Technician , Iti In Electrician / Electronic Trade 18 Servicing Staff : Housekeeping Staff For Three Years
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Uttarakhand View Result →
19.
Petroleum and Natural Gas #8608737 AOC
Rate Contract For Miscellaneous Outside Civil Works In Bongaigaon Refinery, Iocl-10 Misc. outside civil works, Quotable 10.001 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed : All kinds of soil. 10.002 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and for all lift. All kinds of soil. 10.003 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil. 10.004 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete (Measurements to be taken of the face area timbered): 10.005 Depth not exceeding 1.5 m. 10.006 Depth exceeding 1.5 m but not exceeding 3 m. 10.007 Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete (Measurements to be taken of the face area timbered) : 10.008 Depth not exceeding 1.5 m. 10.009 Depth exceeding 1.5 m but not exceeding 3 m. 10.01 Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials: 10.011 All kinds of soil. 10.012 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift. 10.013 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. 10.014 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil. 10.015 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 10.016 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 10.017 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material: 10.018 Beyond 30 cm girth up to and including 60 cm girth. 10.019 Beyond 60 cm girth up to and including 120 cm girth. 10.02 Beyond 120 cm girth up to and including 240 cm girth. 10.021 Above 240 cm girth. 10.022 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: 10.023 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 10.024 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 10.025 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. 10.026 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 10.027 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: 10.028 In cement mortar. 10.029 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50m (stacks of cleaned bricks shall be measured) : 10.03 From brick work in Cement mortar. 10.031 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 10.032 Of area 3 sq. metres and below. 10.033 Of area beyond 3 sq. metres. 10.034 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 10.035 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead: 10.036 For thickness of tiles 10 mm to 25 mm. 10.037 For thickness of tiles above 25 mm and up to 40 mm. 10.038 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 10.039 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 10.04 G.S. Sheet. 10.041 Asbestos sheet. 10.042 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 10.043 T or L iron or pipe. 10.044 R.C.C. 10.045 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 10.046 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. 10.047 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 10.048 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 10.049 75 to 80 mm dia pipe. 10.05 100 mm dia pipe. 10.051 150 mm dia pipe. 10.052 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge : 10.053 Water bound macadam road. 10.054 Bituminous road. 10.055 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 10.056 15 mm to 40 mm nominal bore. 10.057 Above 40 mm nominal bore. 10.058 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 10.059 Up to 150 mm diameter. 10.06 Above 150 mm dia up to 300 mm dia. 10.061 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 10.062 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 10.063 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge. 10.064 Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-charge: 10.065 50 mm average thickness. 10.066 25 mm average thickness. 10.067 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduces steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge: Upto and including 12mm dia. 10.068 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. 10.069 Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers, driver, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Engineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit EACH (EA) stands for One tractor day. 10.07 Transportation of various materials by Truck (of capacity 9-10 Tonne) for following leads or part thereof including loading, unloading such as cement, sand, debris, metal, earth, refractory, insulation, furniture, plants etc. all such materials from one place to another place including battery area and outside battery area all complete as per the direction of the Engineer-in-Charge: Note: Unit of measurement is EACH, which stands for Per Trip. 10.071 Lead beyond 1 km but upto 2 km. 10.072 Lead beyond 2 km but upto 3 km. 10.073 Lead beyond 3 km but upto 4 km. 10.074 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - Cement shall be free issue material. All work up to plinth level : 10.075 1:2:4 (1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). 10.076 1:3:6 (1 Cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). 10.077 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centring, shuttering and finishing: Cement shall be free issue material 10.078 1:1.5:3 (1 cement:1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 10.079 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) including the cost of required centering, shuttering complete. Cement shall be free issue material : 10.08 1:1.5:3 (1 Cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 10.081 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (Cement shall be free issue material). 10.082 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 10.083 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement (Cement shall be free issue material): 10.084 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 10.085 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cement shall be free issue material. 10.086 Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). Cement shall be free issue material. 10.087 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level: 10.088 Thermo-Mechanically Treated bars. 10.089 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: 10.09 Thermo-Mechanically Treated bars of grade Fe-500D or more. 10.091 Centering and shuttering including strutting, propping etc. and removal of form for : 10.092 Foundations, footings, bases of columns, etc. for mass concrete. 10.093 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 10.094 Suspended floors, roofs, landings, balconies and access platform. 10.095 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 10.096 Columns, Pillars, Piers, Abutments, Posts and Struts. 10.097 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (cement shall be free issue material). 10.098 Cement mortar 1:4 (1 cement : 4 coarse sand). 10.099 Cement mortar 1:6 (1 cement : 6 coarse sand). 10.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (cement shall be free issue material). 10.101 Cement mortar 1:4 (1 cement : 4 coarse sand). 10.102 Cement mortar 1:6 (1 cement : 6 coarse sand). 10.103 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in: (cement shall be free issue material). 10.104 Cement mortar 1:4 (1 cement : 4 coarse sand). 10.105 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: (cement shall be free issue material). 10.106 Cement mortar 1:4 (1 cement :4 coarse sand). 10.107 Honey-comb brick work 10/11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level up to floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). Cement shall be free issue material. 10.108 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) up to plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). Cement shall be free issue material. 10.109 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead (Cement shall be free issue material): 10.11 With cement mortar 1:4 (1 cement : 4 fine sand). 10.111 12 mm cement plaster of mix : (cement shall be free issue material). 10.112 1:4 (1 cement: 4 fine sand). 10.113 1:6 (1 cement: 6 fine sand). 10.114 15 mm cement plaster on the rough side of single or half brick wall of mix (Cement shall be free issue material): 10.115 1:4 (1 cement: 4 fine sand). 10.116 1:6 (1 cement: 6 fine sand). 10.117 20 mm cement plaster of mix (Cement shall be free issue material): 10.118 1:6 (1 cement: 6 fine sand). 10.119 6 mm cement plaster of mix : - 1:3 (1 cement: 3 fine sand). Cement shall be free issue material. 10.12 Neat cement punning. Cement shall be free issue material. 10.121 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) (Cement shall be free issue material): 10.122 Flush / Ruled/ Struck or weathered pointing. 10.123 Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine sand) - Flush/ Ruled/ Struck or weathered pointing Cement shall be free issue material. 10.124 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.125 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.126 Providing and fixing 1mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junctions and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer. 10.127 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer: 10.128 Using M.S. angels 40x40x6 mm for diagonal braces. 10.129 Using flats 30x6mm for diagonal braces and central cross piece. 10.13 Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 10.131 Profile B - Fixing with adjustable lugs with split end tail to each jamb. 10.132 Profile B - Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.133 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete: 10.134 Hot finished welded type tubes. 10.135 Providing and fixing bolts including nuts and washers complete. 10.136 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: 10.137 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 10.138 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 10.139 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer: 10.14 M.S. tube. 10.141 Providing and fixing carbon steel galvanised (minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge: 10.142 10 x120 mm. 10.143 10 x140 mm. 10.144 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with: 10.145 With 4.0 mm thick glass panes. 10.146 With 5.5 mm thick glass panes. 10.147 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer (Cement shall be free issue material): 10.148 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 10.149 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (Cement shall be free issue material): 10.15 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 10.151 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.152 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 10.153 0.63mm thick with zinc coating not less than 275gm/sqm. 10.154 Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter for chimney stacks, sky light etc : 10.155 0.63 mm thick. 10.156 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete: 10.157 0.63mm thick with zinc coating not less than 275gm/sqm. 10.158 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete - 1.60mm thick with zinc coating not less than 350gm/sqm. 10.159 Providing and fixing 15 cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete: 10.16 0.63mm thick with zinc coating not less than 275gm/sqm. 10.161 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 10.162 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 10.163 Ridges plain (500 - 600mm). 10.164 Flashings/ Aprons ( up to 600 mm). 10.165 North light curves. 10.166 Barge board (up to 300 mm). 10.167 Crimp curve. 10.168 Gutter (600 mm over all girth). 10.169 Providing flat iron brackets 50x3mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/G.S. sheets gutters with purlins. 10.17 Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra- violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified: 10.171 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. 10.172 2mm thick flat. 10.173 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single socketed pipes: 10.174 75 mm diameter. 10.175 110 mm diameter. 10.176 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 10.177 Coupler - 75 mm. 10.178 Coupler - 110 mm. 10.179 Single pushfit Coupler - 75 mm. 10.18 Single pushfit Coupler - 110 mm. 10.181 Single tee with door - 75x75x75 mm. 10.182 Single tee with door - 110x110x110 mm. 10.183 Single tee without door - 75x75x75 mm. 10.184 Single tee without door - 110x110x110 mm. 10.185 Bend 87.5 Degree - 75 mm bend. 10.186 Bend 87.5 Degree - 110 mm bend. 10.187 Shoe (Plain) - 75 mm Shoe. 10.188 Shoe (Plain) - 110 mm Shoe. 10.189 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete: 10.19 75 mm. 10.191 110 mm. 10.192 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 10.193 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete: 10.194 Fixed to steel windows by welding. 10.195 Fixed to openings /wooden frames with rawl plugs screws etc. 10.196 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. 10.197 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 10.198 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 10.199 100x58x1.90 mm. 10.2 75x47x1.70 mm. 10.201 50x37x1.50 mm. 10.202 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 10.203 100x75x3.50 mm. 10.204 75x60x3.10 mm. 10.205 50x40x2.50 mm. 10.206 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete: 10.207 125 mm. 10.208 100 mm. 10.209 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 10.21 250x16 mm. 10.211 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 10.212 200x10 mm. 10.213 150x10 mm. 10.214 100x10 mm. 10.215 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 10.216 125 mm. 10.217 100 mm. 10.218 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete: 10.219 250 mm weighing not less than 150 gms. 10.22 200 mm weighing not less than 120 gms. 10.221 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 10.222 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm) with necessary accessories and screws etc. complete. 10.223 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 10.224 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 10.225 125x63x4 mm. 10.226 100x63x4 mm. 10.227 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 10.228 250x16 mm. 10.229 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 10.23 250x10 mm. 10.231 200x10 mm. 10.232 150x10 mm. 10.233 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 10.234 125 mm. 10.235 100 mm. 10.236 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 10.237 Single rubber stopper. 10.238 Twin rubber stopper. 10.239 Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 10.24 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). 10.241 Providing and fixing PTMT handles with necessary screws etc. complete: 10.242 125x34x24 mm weighing not less than 23 gms. 10.243 150x34x24 mm weighing not less than 26 gms. 10.244 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc. complete: 10.245 152x42x18 mm weighing not less than 60 gms. 10.246 202x42x18 mm weighing not less than 78 gms. 10.247 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. 10.248 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 10.249 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: 10.25 Extruded section profile size 48x40 mm. 10.251 Extruded section profile size 42x50 mm. 10.252 Providing and fixing to existing door frames: 10.253 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of H section, a UPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. U cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 10.254 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of H section, a UPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. U cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. 10.255 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmX25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm and 1.0 mm (± 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25MM X 11MM. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 10.256 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in-Charge. 10.257 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail, paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles and rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer- in-charge, Manufacturers specification and drawing: 10.258 30 mm thick plain PVC door shutters. 10.259 30 mm thick pre laminated PVC door shutters. 10.26 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. 10.261 Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) - 12mm thick commercial ply conforming to IS : 1328 BWR type. 10.262 Providing and fixing bright/matt finished stainless steel handles of approved quality & make with necessary screws etc. all complete: 10.263 125mm. 10.264 100mm. 10.265 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc complete as per direction of Engineer-in-Charge - 200 mm. 10.266 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Cement shall be free issue material. 10.267 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, .hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement shall be free issue material. 10.268 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. Cement shall be free issue material. 10.269 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in colours, shades exept burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Cement shall be free issue material. 10.27 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete. Cement shall be free issue material. 10.271 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Cement shall be free issue material. 10.272 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Cement shall be free issue material): 10.273 Size of Tile 600x600 mm. 10.274 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete (Cement shall be free issue material): 10.275 Size of Tile 600x600 mm. 10.276 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 10.277 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 10.278 Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). 10.279 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finishedkerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). 10.28 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape,made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineerin-Charge: 10.281 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern. 10.282 80mm thick C.C. paver block of M-30 grade with approved colour, design & pattern. 10.283 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Cement shall be free issue material. 10.284 White washing with lime to give an even shade: - New work (three or more coats). 10.285 White washing with lime to give an even shade : 10.286 Old work (two or more coats). 10.287 Colour washing such as green, blue or buff to give an even shade : 10.288 New work (two or more coats) with a base coat of white washing with lime. 10.289 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. 10.29 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 10.291 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 10.292 Finishing walls with water proofing cement paint of required shade-New work (Two or more coats applied @ 3.84 kg/10 sqm). 10.293 Finishing walls with Acrylic Smooth exterior paint of required shade-New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). 10.294 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: 10.295 One coat. 10.296 Two coats. 10.297 Finishing walls with water proofing cement paint of required shade : 10.298 Old work (one or more coats applied @ 2.20 kg/10 sqm)over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. 10.299 Finishing walls with Acrylic Smooth exterior paint of required shade: 10.3 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 10.301 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 10.302 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 10.303 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade - New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). 10.304 Applying priming coat (This item is deleted for SOR 2023). 10.305 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. 10.306 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. 10.307 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade - Two or more coats on new work. 10.308 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade-Two or more coats on new work. 10.309 Painting with aluminium paint of approved brand and manufacture to give an even shade - Two or more coats on new work. 10.31 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work. 10.311 Lettering with black Japan paint of approved brand and manufacture. Note: Rate EACH (EA) stands for Per letter per cm height. 10.312 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 10.313 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 10.314 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 10.315 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (Cement shall be free issue material): 10.316 450 mm dia. R.C.C. pipe. 10.317 600 mm dia. R.C.C. pipe. 10.318 900 mm dia. R.C.C. pipe. 10.319 1000 mm dia. R.C.C. pipe. 10.32 1200 mm dia. R.C.C. pipe. 10.321 TEMPORARY SHED: Erection of tubular structures with trusses and purlins, tie-rods, columns for temporary shutdown sheds and tea booths etc. including transportation of necessary materials from stores, erecting in position, bolting and fixing GI / AC / Aluminiun corrugated sheet on sides and top with necessary hooks, 8mm dia GI limpet and bitumen washers, purlins, columns, tie rods etc., salvaging, transportation and including dismantling, stacking at Civil maintenance or Refinery stores, all labour tools, plants etc. complete, (M.S. structures and GI / AC /Aluminium sheets supplied free by Owner) including supplying and fixing bolts, nuts, hook bolts, limpet washers etc. complete as per direction of Engineer-in-Charge (Measurement will be based on floor area covered). 10.322 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 10.323 For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron). 10.324 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron). 10.325 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. 10.326 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 10.327 Pre-laminated particle board with decorative lamination on both sides. 10.328 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item): 10.329 With float glass panes of 4.0 mm thickness. 10.33 With float glass panes of 5.50 mm thickness. 10.331 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg., for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: 10.332 With stainless steel cover plate minimum 1.25 mm thickness. 10.333 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete - up to 5mm depth and 5 mm width. 10.334 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge: 10.335 Powder coated minimum thickness 50 micron aluminium tubular handle bar. 10.336 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc complete. 10.337 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete: 10.338 Powder coated minimum thickness 50 micron aluminium. 10.339 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer- in-charge: 10.34 Powder coated minimum thickness 50 micron aluminium. 10.341 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge (Only weight of grill to be measured for payment). 10.342 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase. Cement shall be free issue material. 10.343 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Cement shall be free issue material. 10.344 Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc (Cement shall be free issue material): 10.345 100 mm diameter. 10.346 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-charge: 10.347 For door / window / clerestory window. 10.348 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty - Float glass panes of thickness 4 mm (weight not less than 10kg/sqm). 10.349 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty - Float glass panes of thickness 5.5 mm (weight not less than 12.5kg/sqm). 10.35 Renewing glass panes and refixing existing wooden fillets- Float glass panes of thickness 4 mm (weight not less than 10kg/sqm). 10.351 Renewing glass panes and refixing existing wooden fillets- Float glass panes of thickness 5.5 mm (weight not less than 12.5kg/sqm). 10.352 Renewal of old putty of glass panes (length). 10.353 Refixing old glass panes with putty and nails. 10.354 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-charge. 10.355 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-charge - Internal work - Exposed on wall. 10.356 Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, steaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including plugging and dewatering of manholes, removal of muck, sludge floating materials etc. and disposing, the same to dumping pit within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete. 10.357 Manholes of depth upto 2.0 M 10.358 Manholes of depth beyond 2.0 M but upto 3.0M 10.359 Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compressed air, steaming etc., removal of oily muck outside the chamber complete upto 100M lead. The item includes transportation of all machinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. 10.36 Cleaning, dechoking and flushing 50mm-100mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sewer cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of the Engineer-in-Charge. 10.361 Removal of dead animal of any kind and disposal of same at dumping ground and burying it at one meter depth or more depending upon the size of dead animal and re-filling with soil to cover it completely including excavation of ditches, all complete. 10.362 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 10.363 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 10.364 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 10.365 W.C. Pan with ISI marked white solid plastic seat and lid. 10.366 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 10.367 Single squatting plate with 5litre P.V.C. automatic flushing cistern. 10.368 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : 10.369 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 10.37 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. 10.371 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required - White glazed fire clay kitchen sink of size 600x450x250 mm. 10.372 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 10.373 Kitchen sink with drain board - 510x1040 mm bowl depth 250mm. 10.374 Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required - White glazed fire clay draining board of size 600x450x25mm. 10.375 Providing and fixing white vitreous china water closet squatting pan (Indian type): 10.376 Long pattern W.C. pan of size 580 mm. 10.377 Orissa pattern W.C. pan of size 580x440 mm. 10.378 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 10.379 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 10.38 250x130x30 mm. Unit Each (EA) stands for EACH PAIR 10.381 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10.382 10 litre capacity - White. 10.383 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 10.384 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 10.385 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm or 340 x 410 x 265 mm sizes respectively. 10.386 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 10.387 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 10.388 Flat back wash basin of size 630x450mm. 10.389 Angle back wash basin of size 600x480mm. 10.39 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: 10.391 Semi rigid pipe - 40 mm dia. 10.392 Flexible pipe - 40 mm dia. 10.393 Providing and fixing 100 mm sand cast Iron grating for gully trap. 10.394 Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 10.395 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: 10.396 Rectangular shape - 453 x 357 mm. 10.397 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 10.398 Providing and fixing soil, waste and vent pipes : 10.399 75 mm diameter - Sand cast iron S&S pipe as per IS: 1729. 10.4 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. 10.401 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 10.402 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 10.403 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 10.404 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 10.405 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand), (Cement shall be free issue material): 10.406 100 mm dia. 10.407 75 mm dia. 10.408 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: Internal work - Exposed on wall: 10.409 15 mm nominal outer dia pipes. 10.41 20 mm nominal outer dia pipes. 10.411 25 mm nominal outer dia pipes. 10.412 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer in Charge: External work: 10.413 15 mm nominal dia pipes. 10.414 20 mm nominal dia pipes. 10.415 25 mm nominal dia pipes. 10.416 40 mm nominal dia pipes. 10.417 50 mm nominal dia pipes. 10.418 75 mm nominal dia pipes. 10.419 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall: 10.42 15 mm dia. nominal bore. 10.421 20 mm dia. nominal bore. 10.422 25 mm dia. nominal bore. 10.423 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: External work: 10.424 15 mm dia. nominal bore. 10.425 20 mm dia. nominal bore. 10.426 25 mm dia. nominal bore. 10.427 40 mm dia. nominal bore. 10.428 50 mm dia. nominal bore. 10.429 65 mm dia. nominal bore. 10.43 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 10.431 25 to 40 mm nominal bore. 10.432 50 to 80 mm nominal bore. 10.433 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 10.434 25 mm nominal bore. 10.435 40 mm nominal bore. 10.436 50 mm nominal bore. 10.437 65 mm nominal bore. 10.438 80 mm nominal bore. 10.439 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 10.44 15 mm nominal bore. 10.441 20 mm nominal bore. 10.442 25 mm nominal bore. 10.443 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 10.444 15 mm nominal bore. 10.445 20 mm nominal bore. 10.446 25 mm nominal bore. 10.447 Providing and fixing uplasticised PVC connection pipe with brass unions : 10.448 30 cm length - 15 mm nominal bore. 10.449 30 cm length - 20 mm nominal bore. 10.45 45 cm length - 15 mm nominal bore. 10.451 45 cm length - 20 mm nominal bore. 10.452 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 10.453 15 mm nominal bore. 10.454 20 mm nominal bore. 10.455 25 mm nominal bore. 10.456 40 mm nominal bore. 10.457 50mm nominal bore. 10.458 65mm nominal bore. 10.459 80 mm nominal bore. 10.46 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 10.461 15 mm nominal bore. 10.462 20 mm nominal bore. 10.463 25 mm nominal bore. 10.464 40 mm nominal bore. 10.465 50 mm nominal bore. 10.466 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 10.467 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI:12701, colour of opaque white or as approved by Engineer-in- charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. 10.468 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore. 10.469 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. - 15 mm nominal bore. 10.47 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 - 15 mm nominal bore. 10.471 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore. 10.472 Providing and fixing C.P. brass extension nipple (size 15mm x 50mm) of approved make and quality as per direction of Engineer-in-charge. 10.473 Providing and fixing PTMT bib cock of approved quality and colour: 10.474 15 mm nominal bore, 122mm long. Weighing not less than 99 gms. 10.475 Providing and fixing PTMT stop cock of approved quality and colour: 10.476 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 10.477 20mm nominal bore, 89mm long. Weighing not less than 88 gms. 10.478 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. 10.479 Providing and fixing PTMT pillar cock of approved quality and colour: 10.48 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 10.481 15mm nominal bore, 125mm long foam flow. Weighing not less than 120 gms. 10.482 Providing and fixing PTMT, push cock of approved quality and colour: 10.483 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 10.484 15 mm nominal bore, 80mm long. Weighing not less than 46 gms. 10.485 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 10.486 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour: 10.487 15 mm nominal bore with 30cm length. 10.488 15 mm nominal bore with 45cm length. 10.489 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge: Concealed work including cutting chases and making good the walls etc (Cement shall be free issue material): 10.49 15 mm nominal dia pipes. 10.491 20 mm nominal dia pipes. 10.492 25 mm nominal dia pipes. 10.493 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall (Cement shall be free issue material): 10.494 15 mm dia nominal bore. 10.495 20 mm dia nominal bore. 10.496 Cutting holes up to 30x30 cm in walls including making good the same - With common burnt clay F.P.S. (non modular) bricks. Cement shall be free issue material. 10.497 Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Cement shall be free issue material. 10.498 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Cement shall be free issue material. 10.499 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Cement shall be free issue material. 10.5 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete (Cement shall be free issue material): 10.501 For pipes 100 to 230 mm diameter. 10.502 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. Pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc complete (Cement shall be free issue material): 10.503 600 mm dia. R.C.C. pipe. 10.504 900 mm dia. R.C.C. pipe. 10.505 1000 mm dia RCC pipes (Laying by manual/ mechanical means). 10.506 1200 mm dia RCC pipes (Laying by manual/ mechanical means). 10.507 6MM Thick Commercial plywood- MR Grade- IS-303 10.508 12 MM Thick Commercial plywood - MR Grade- IS-303 10.509 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 10.51 Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of Engineer-in-charge. 10.511 Supplying and stacking at site: 10.512 53 mm to 22.4 mm size stone aggregate. 10.513 Red bajri. 10.514 Good earth. 10.515 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead up to 50 metres - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 10.516 Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead up to 50 metres - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. 10.517 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. Note: Unit Each (EA) refers to Each Set. 10.518 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately)- Payment to be made per metre cost of total length of barbed wire used - With G.I. barbed wire. 10.519 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia. etc. complete. 10.52 Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete: 10.521 New work (Two or more coats). 10.522 Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete: 10.523 New work (Two or more coats). 10.524 Old work (One or more coats). 10.525 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m) having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). 10.526 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge: 10.527 Made of G.I. wire of dia 4mm. 10.528 Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. 10.529 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 10.53 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095 (Part I) : 2011 (Board with BIS certification marks). 10.531 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks). 10.532 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metalgrid of hot dipped galvanized steel sections (galvanized @ 120gsm/sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main T at 600mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge: 10.533 12.5mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum plasterboard; manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 10.534 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing C wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier of size 10x38x10mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in tiles into spring T with : 10.535 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 10.536 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 X 595 mm of approved texture, design and patterns as per CPWD Specifications 2019 to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sum including both sides) comprising of main-T runners of size 24 X 38 mm of length 3000 mm, cross-T of size 24 X 32 mm of length 1200 mm and secondary intermediate cross-T of size 24 X 32 mm of length 600 mm to form grid module of size 600 X 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12 x 50mm long dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 76x25x25x1.6mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick or even bigger size dash fastener if required, fixed with Galvanised iron perimeter wall angle of size 24 X 24 X 0.40 mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S. screws. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge: 10.537 With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. 10.538 Providing services & assitance for emergency works like VIP visits, Audit job requirements, during disaster drills, offsite & onsite mock drills, unplanned plant shutdowns & for purely labour oriented jobs, TPM visit related jobs, at debris yard to ensure orderly dumping, heavy monsoon plant emergency handling jobs, periodic flushing of drinking water network, dechocking of sanitary/plumbing networks, sanitary/plumbing related assistance services, board/poster fixing on walls, emergency assistance service to other departments as per urgent requirement of management etc. and any other jobs which are not covered under any other SOR items but essentially required for effective and smooth execution of other civil repair & maintenance jobs at site as per the direction & instruction of EIC. (Note : Unit EA refers to carry out the above activities for eight working hours a day excluding any break) 10.539 (I) Unskilled Nature 10.54 Providing locally available 1st class brick on edge linning in cement mortar 1:4 (1 cement : 4 sand) for slopes of trapizoidal ditches, in pavements etc laying in herring bond pattern with a course of full brick length at every 3 mtr. or in consonance with the drawing including dressing the slope of the ditches before lining, curing, scaffolding etc, complete for all length and depth.(cement free issue by IOCL) 10.541 Removal of creeper from fencing upto 3.50 m height including cleaning the bottom of fencing by cutting roots of unwanted shrubs etc complete including disposal as per direction of EIC 10.542 Cleaning of AC gutter, GI Gutter, RCC duct, rain water pipe, AC pipe etc. for all height including supply of all tools & tackles & disposal of waste materials to disposal yard as per direction of EIC. 10.543 Supplying and fixing 150mm dia PVC rain water pipes with holder bat clamps including fixing or embedding in brick or concrete wall, columns ,supplying and fixing with necessary socket,bend, Tee,Elbow etc and scaffolding for all height etc complete. 10.544 Repair of drinking water pipe lines, toilet fixtures, water taps, bib cock, stop cocks, pillar cock or any other plumbing fixtures etc complete with all labours, tools, tackles and small consumables like etc. 10.545 Providing and fixing rust proof expansion fasteners of approved manufacturer of expansion dowel and / or expansion sleeve type , at specified position in concrete floors , roof beams & columns etc.for all heights according to approved manufacturer specification using necessary tools specified by manufacturer & approved by the EIC , including nuts washers, and bolts , necessary scaffolding, drilling of the holes with electric drill ,scaffolding with all labour material complete of following sizes 10.546 (A) 8 mm dia bolts 10.547 (B) 12 mm dia bolts 10.548 Supplying and fixing in position approved quality and make 15 mm dia CP brass pillar cock of heavy grade / duty including connections etc complete. 10.549 Collection of all kinds of scrap steel materials like structural steel, reinforcement bars, pipes, rails, fabricated steel items, gates, fencing posts, manhole covers, or any other steel articles lying unclaimed inside plant area including loading, transportation and unloading in BRPL steel scrap yard etc complete as directed with supply of all labour, tools, tackles, equipments etc for collection, segregating , loading, unloading as directed by EIC. Payment shall be made on tonne basis for which unloaded and loaded trucks shall have to be brought to warehouse weighbridge for weighing. 10.55 Arranging cess pool van for sucking & empting out septic tank sluge & disposal at a distance in pit as directed by EIC. Payment will be made on per trip basis of capacity 3000 litres approx. 10.551 Providing EARTH EXCAVATOR (JCB) with driver & helper for variousmiscellaneous civil works viz. uprooting of big bushes, shifting &removal of debris removal of earth heaps, cleaning of road blocks ,excavation of earth any other work inside & out side Refinery includingcost of diesel and other consumables etc. complete as per the directionof Engineer-in-charge. 10.552 Trimming of trees of all sizes of girth including cutting of tree branches as per direction of EIC & disposal of cut branches in to disposal yard inside plant area. 10.553 P. Trap CI 100mm 10.554 Bottle Trap 32mm 10.555 Labour charges for collecting, removal and disposal of oily sludge/muck etc. in liquid semiliquid or in solid form or mixed together from any pit like outpit of tanks including pits made for tank cleaning, guard basins, oil separators etc. and / or sludge / muck collected from inside tanks including all loading, unloading transportation and disposal in melting pits and / or sludge pits or in disposal ground anywhere within owners premises and all lift, removing oil spillage during transporting by spreading sand, scraping the area etc. complete with all labour, tools and tackles, transport etc. as per direction of the Engineer-in-Charge. 10.556 RETRO REFLECTIVE SIGNAGE WORKS Providing and fixing RETRO REFLECTIVE signboard made out of 14SWG Aluminium sheet, face fully pasted with ENGINEERS GRADE retro reflective sheeting as per IRC-67-2001 along with letters, numerals, logo, symbols, boundary lines etc. as per colour scheme as approved by Engineer-in-Charge. The backside of Al sheet to be grey stove enamel painted with proper clamp arrangements for fixing on structures, overhead structures etc. (Structural works to be paid separetly). Average spacing between two letters as per IRC-67-2001 10.557 Providing and installation of flex board of make LG/STAR with computerized printing of letters and figures including steel frame of ISA 50mm * 50mm * 5 mm thk or MS hollow pipe 1 inch dia all around the board and at 3 m centre to centre in case of bigger size board, all labour, tools and tackles complete. The rate includes providing flex board, printing, providing steel support structure, transportation of the material, fixing the board with wire, screws or J hooks as required at position, all complete as per direction of Engineer-in-charge. 10.558 Supplying and fixing of fluorescent tape 10.559 Providing and fixing of Chicken Wire mesh of 12.5 mm opening size & 28 SWG including Fixing,labour,tools & tackles all complete as per direction of Engineer-in-charge. 10.56 design painting on all surface at all height with Luxol High Gloss synthetic enamel paint of M/s Berger Paints/ Apcolite of M/s Asian Paint/ Brolac of M/s J & N of any colours as directed by the Engineer-in-Charge including lettering if required with all labour and material complete. 10.561 Providing & applying HERITAGE or approved equialant brand textured surface coating with lacquer finish in one coat over cement plastered surface including surface preparation , mixing , application , curing etc. all complete as per manufacturers instruction. Providing & appliying granular type surface coating of Extension grade of approved shade. 10.562 Pumping out of water including dewatering oily water mixed with muck / sludge etc. from foundation trenches, ponds, depressions etc. by contractors own pump with all labour, hoses, consumables, fuel etc. complete as per the direction of the Engineer-in-charge. Note: This item shall be operated only after getting the approval of the Engineer-in-charge. This item shall be included only when Dewatering/ Pumping out of water is not included in any other item. (This item pertains to only such pumping of water as is envisaged at the time of tendering and do not include those that need be covered under contractual risk). 10.563 From ponds, pits, trenches etc. where volume is not measurable. Note: Unit of measurement is H (hour) which shall be measured as number of hrs. of pump running per horse power (HP) of pump used. 10.564 Providing and bunding with sand filled bags for maintaining and diverting the flow of water, for arresting breaches or making bunds, protection walls etc. wherever required as per the direction of Engineer-in-Charge including necessary collection and filling sand and stitching the bags, carting to site of work to any distance, keeping in position as directed, plugging holes, pading with all labour, materials, tools, plants etc. complete. 10.565 When sand is to be supplied by contractor. 10.566 Labour charges for fabricating & erecting structural steel work such as trusses, purlins, sagrods, bracings, gates or other miscellaneous fabrications in built-up section including cutting, hoisting,fixing in position, revetting, bolting and welding of joints from joists, angles, channels, flats, round bars, plates with all necessary labour & consumables like welding rods, gas and scaffoldings complete as per the directions of engineer-in-charge (Only structural steel is to be supplied by IOCL free of cost). 10.567 Labour charges for in-situ welding of MS fittings and fixtures like stoppers, handles, stays, safety bars, hinges etc. to existing steel windows at various places (excluding the cost of fittings and fixtures). 10.568 Supplying, fitting & fixing UPVC pipes A - Type and fittings conforming to IS : 13592-1992 with all necessary clamp nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc.) complete. 10.569 160 mm Dia. UPVC pipes 10.57 160 mm Dia. UPVC pipe bend, 87.5 degree 10.571 UPVC pipe shoe, 160 mm Dia. 10.572 Supplying, fitting & fixing UPVC pipes A Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn ,Valamoid/Bitumen/M-Seal etc) complete. 10.573 UPVC fittings- Plain Tee- 160mm dia 10.574 UPVC fittings- Plain Y- 160mm dia 10.575 Barricading work (Supply & Erection) Supply at site approved quality & grade (as YST 32 as per IS : 1161) medium weight MS black scaffolding pipes. The distance between two consecutive vertical pipes shall be 2 Metre. c/c and the distance between two horizontal pipes shall be 1 Metre. c/c for front face of CGI sheet covering face of the scaffolding whereas distance in both the directions shall be 2 metre. for the back face of the scaffolding. The distance between two faces of double scaffolding shall be 4 Metre. and all the vertical pipes shall be inserted by 1 Metre. below the existing ground surface. The scaffolding pipes shall be connected firmly with each other through iron clamps, hooks etc. and the whole scaffolding work shall be stiffened by providing gunny-ropes, pegs etc. complete as per drawings, specification & direction of Engineer-in-charge to ensure the stability of the whole structure. Maintenance of the total scaffolding and stiffening works shall be done by the contractor till all the hot jobs are completed and for that regular and routine checking of clamps, hooks, tightening etc. shall be done by the Contractor as directed by Engineer-in-charge Measurement and payment of the item executed will be made on Sq. M area basis and this Sq. M area will be obtained by multiplying one longer edge of plan of the scaffolding work and its clear height above the ground surface. The Contractor shall demolish carefully all the scaffolding & stiffening materials after completion of all hot jobs and take back all the materials by him/them. 10.576 CGI Sheets Supplying the CGI sheets of not less than 22 gauges and approved make & quality (CGI sheets shall be supplied by the Contractor at his own cost) and transporting the same to worksite at Haldia Refinery and erecting and fixing the same in walls., vertical scaffoldings, roofs etc. by means of CGI J or L hooks, 8 mm diameter CGI Plain and bitumen washers etc. The fixing of CGI sheets with vertical and horizontal scaffoldings shall be well tight and 10 cm over lapping between any adjacent CGI sheets. The Contractor shall arrange for regular and routine checking of fittings, fixing fixtures of CGI sheets with the scaffoldings and shall also repair all the damages till the hot jobs for the proposed tanks are completed. The Contractor shall dismantle al the CGI Sheets carefully and take back the same by him/them after all the hot jobs are completed. Measurement & payment of this item shall be made against the net area of the work done. Note : After completion of hot job entire materials like CGI sheets scaffolding pipes, clamps etc. shall be taken out by the contractor. 10.577 Providing and fixing 15 mm nominal bore C.P brass Pressmatic pillar cock with auto closing system for wash basins. 10.578 Tack Welding (Length of 1 tack is 10 mm) CS to CS Tack Welding. 10.579 Dismantling of existing sanitary and Kitchen fittings i.e. European/Indian WC, Wash basins, Urinals, Low-level cistern / bath tub / Kitchen sinks etc including stacking of useful materials near the site & disposal of unserviceable material within 100-m lead, all complete as per directions of engineer-in-charge. 10.58 Supplying all materials preparing surface and applying of acrylic co polymer admixture of any approved make on steel surface in any portionat any height including hire charges of scaffolding and also mixing the compound with cement concrete in proportion as recommended by the manufacturer or decided by the Engineer-in-Charge all as per specification and direction of the Engineer-in-Charge with all labour and materials complete. 10.581 Removing of damaged floor/shelve topping area by chipping and chiseling thoroghly upto a thickness of 25mm without damaging base concrete of existing damaged floor topping including disposal of chipping materials upto a distance of 500M or as directed 10.582 Supplying SAFE CURE Barricading tape of length 250 m or equivalent as and when required basis as per direction of SIC/EIC. 10.583 Supplying UltraTarp PE of thickness 120 Gsm or equivalent as and when required basis as per direction of SIC/EIC. 10.584 Providing & laying Adhesive Rubber base ( Mahindras M-Seal or equivalent) with all labour & materials complete as direction of Engineer-in-Charge. 10.585 Providing and fixing unplasticised-PVC pipe(160mm) clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete. 10.586 Fixing on wall face unplasticised -Rigid PVC rain water (160mm diameter single socketed pipes)pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion. 10.587 Providing and fixing 75MM DIA HDPE pipes (PE-80,PN-6 rating) having thermal stability for hot & cold water supply including all HDPE plain / threaded fittings, this included leak proof jointing of pipes and fittings, trenching , refilling & testing of joints complete as per direction of Engineer-in-charge. 10.588 Providing and fixing 110MM DIA HDPE pipes (PE-80,PN-6 rating) having thermal stability for hot & cold water supply including all HDPE plain / threaded fittings, this included leak proof jointing of pipes and fittings, trenching , refilling & testing of joints complete as per direction of Engineer-in-charge. 10.589 Providing and operating Earth Excavator of 01 Cum(POCLAIN) on hourly basis with driver & helper for various miscellaneous civil works viz.uprooting of big bushes, shifting & removal of debris removal of earth heaps, cleaning of road blocks,drain cleaning works,excavation of earth any other work inside & outside Refinery including cost of diesel and other consumables etc. complete as per the direction of Engineer-in-charge. 10.59 Supply of Protective Tape for miscellaneous use as per direction of the EIC. 10.591 Supply of 22 SWG GI binding wire as per direction of the EIC. 10.592 Supply of Wheel of 75 mm dia. 40 mm wide as per direction of the EIC. 10.593 Clearing the area of grass, rank, vegetation, wild growth bushes,trees and plants up to 30 cm. girth measured at a height 1.0 m above ground level from roadside berms, under side of pipelines, under the structures, tank farms, drains, railway exchange yard etc. including removal of grass, plants and rubbish etc. by cutting with Darant/sickle(hansua) etc completely near to ground level (The Darant/sickle(hansua) etc. completely near to ground level (The shoots remaining should not be more than 5cm in height) as per directions of engineer-in-charge and collecting all cut grass, vegetation etc. and bundling in to heaps and disposing at earmarked places only within a lead of 3 km with contractors own transport with all tools, tackles, labour etc. complete as per specifications and directions of Engineer-in-Charge. 10.594 Providing and fixing Helix Concertina Coil SS304- 600 mm dia 6 meter openable length having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle X shaped 2.4 m or 3.00 m apart and with 9 horizonatal R.R.W Razor Runner Wire stud tied with SS304 anti theft nut & bolt nut and dove tail clips to retain horizontal including necessary tied to steel angle section all complete as per direction of Engineer-in-charge with Razor Runner Wire (RRW) Barbed tape is wrapped 230° around 2.5mm core wire of high tensile strength of 110 kg/ sq.mm with (0.40mm Thick ) and weight 75 gm/meter Tape Material: SS304 - | 19 mm (+/- 1) wide prior to forming Core Material: HTSS - 2.50 mm diameter (cost of M.S. angle and concrete to be paid separately) 10.595 Providing and fixing with horizontal lines and two diagonals interwoven with horizontal wires, of SS304 barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with S.S. staples, turn C clips etc. complete.
Contract Date: Jan 16, 2026 Contract Value : ₹ 65.68 Lakh
Boards / Undertakings / PSU No of Bidders 16
Assam View Result →
20.
Defence #8485721 AOC
Tender For Provision Of Installation Of Smart Meters With Prepayment Mode At Different Stations Under Ce Kolkata Zone.; 1 NOTE (Applicable for all items) :-(i) The bidders/contractorsare advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.SCHEDULE A PART-I (PHASE-I) 2 Supply and Installation of Smart Single Phase Meter of different makes (not more than 33% of a particular make) with the following specifications:• AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10A-60A, with 3200 impulses per KWh,LED forPhase presence & LED for Relay status, conforming to IS-16444 (Reaffirmed 2020) standard with plugable GPRS/4G Communication or 865-867 MHz 6LowPAN Mesh Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LCD based display only.• Meter Should support the following data : 15/30 min instantaneous data for Voltage, Current, Power factor, Power, Cumulative energy and frequency, monthly billing data & antitamper features. Load survey data for 45 days with 30 min integration period for kWh, Voltage, Current, frequency etc.• Meter should have connect / disconnect functionality operable from prepaid billing software & shall show balance on display• The meter should support open communication protocol DLMSwith the softwareNote: (a)The contractor would be responsible from removing the existing meter, noting down the reading and depositing it with the MES.(b) It would be possible to run the meter in prepaid mode(c) Security features to prevent unauthorised access to the AMI including smart meter and meter data etc and to ensure authentication of all AMI eliments by CERT auditor of Armed Forces as per Appx D of E-in-C branch policy No 12/2023 vide letter A/37696/Gen/Pol/E2W(PPC) dt 30 Aug 2023. 3 Supply and fixing Compatible IP54 compliant polycarbonate box for outdoor mounting with optical port Provision on meter box. ( for single phase smart metres) 4 Supply and Installation of Smart Three Phase Meter of different makes (not more than 33% of a particular make) with the following specifications:• AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10A-100A, with 1600 impulses per KWh, LED for Relay status, conforming to IS-16444 (Reaffirmed 2020) standard with plugable GPRS/4G communication or 865-867 MHz 6LowPAN Mesh Radio Frequency communication facility with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LCD based display only. • Meter Should support the following data : 15/30 min instantaneous data for Voltage, Current, Power factor, Power, Cumulative energy and frequency, monthly billing data & antitamper features. Load survey data for 45 days with 30 min integration period for kWh, Voltage, Current, frequency etc.• Meter should have connect / disconnect functionality operable from prepaid billing software & shall show balance on display• The meter should support open communication protocol DLMSwith the softwareNote: (a)The contractor would be responsible from removing the existing meter, noting down the reading and depositing it with the MES.(b) It would be possible to run the meter in prepaid mode 5 Supply and fixing Compatible IP54 compliant polycarbonate box for outdoor mounting with optical port Provision on meter box.( for 3 phase metre) 6 Supply, installation, testing & commissioning of Data Concentrator Unit (DCU) compatible for remote Automatic Meter Reading (AMR) solution and capable of communicating with the LPRF energy Meter with inbuilt Low Power Radio Frequency (LPRF) communication facility in 865-867 MHz working on Mesh networkand with the MES Local server through GPRS/ 4G cellular communication and battery backup and min. IP65 compliance. Mounting accessories, wiring shall be deemed to be included in quoted rates. Test Report for IP compliance from reputed NABL lab shall be submitted. 7 Supply & Maintenance charges of SIM Card including perodic charges to telecom operator to be used in DCU from installtion till completion of defect liability period of 2 years. 8 Supply & Maintenance charges of SIM Card including perodic charges to telecom operator to be used in GPRS smart meters from installtion till completion of defect liability period of 2 years. 9 Supplying, Fixing, Commissioning and testing of configuration of web based prepaid software with MES Localserver with following modules:(i) Meter Data Management Module: The meter data management module would be responsible for collecting the data from the Data Concentrator and smart meters and make the data available to the billing system. The system would support offline meter data entry.The meter data management system would capture and provide the following data:(a) 30min instantaneous data from all the meters for seven parameters- Cumulative Energy,Power, Current, Voltage, Power factor, MD and Frequency.(b) Monthly and quarterly billing survey data for cumulative energy and max demand, Load Survey Data, Tamper Events(ii) Communication module: The system should provide communication of energy data and bills via print, email.(iii) Meter Master Data : The system would support meter data repository. The system should support meter replacment process.(iv) Excel Export : The system would support export of metering and billing data in excel format(v) Software shall be suitable for Integration with smart meters and Data concentrator unit of any make approved as per IS 16444 standard.(vi) Software shall be audited/certified by CERT-India enpanelled firm/CERT Auditor of Armed forcesfor any cyber security related threat & complying as per ENC guidelines. All the testing and cost of audit related to CERT approal shall be in Software OEM scope and shall be tested for any vulnerabilities after installation at MES premises and certificate of successful testing shall be provided from CERT empanelled vendor.(vii) It shall also include recurring SMS charges, Email gateway integration charges, payment gateway charges for online meter recharge, software bug fixes if any shall be included in quoted rate for 2 years including DLP period. (viii) Mobile App: Andriod & ios App for consumer to view their meter data & balance along with online recharge facility.Contd... 10 (ix) Prepayment: The system should periodically monitor the energy consumption of prepaid consumers and decrease the available credit based on the consumption. The system should allow online / digital recharging through consumer App (Android and iOS based) and Web portal. The configuration and necessary arrangement for payment gateway shall be deemed included in the quoted rate. The system should send connect/disconnect command on the basis of available credit. Low credit alarm: The system will give an alarm over the consumer App and SMS to the registered mobile number in case the credit in the meter goes down below a predefined limit. Emergency credit: The meter will work even when the credit falls down to zero to prevent disconnection. This limit shall be configurable. The system should support happy hours in order to prevent disconnection in non-working hours and on holidays. The Happy hours should beconfigurable.(x) Software shall able to handle around 6000 smart meters of different makes as per IS-16444 standard. 11 Hosting the system to Government community cloud in place of MES local server for hosting and management of supplied software application with standby server (For 2500 Smart Meters). 12 Supply ,installation,testing & commissioning of Repeater unit with inbuilt Low Power Radio Frequency (LPRF) communication facility in 865-867 MHzwith inbuilt AC power supply complete all as specified and as directed. 13 Supply, installation, commissioning & testing of server (main server and backup server includingApplication & Mobile App server)model Dell PowerEdge R450 Rack Server or higherwith the following specifications complete all as specified and directed :-Chassis with up to 8x2.5 Drives Trusted Platform Module 2.0 V32.5 Chassis with up to 8 Hard Drives (SAS/SATA) 1 CPUIntel® Xeon® Silver 4314 2.4G, 16C/32T, 10.4GT/s, 24M Cache, Turbo, HT (135W) DDR4-2666 4 x 16GB RDIMM, 3200MT/s, Dual Rank 2 x 480GB SSD SATA Read Intensive 6Gbps 512 2.5in Hot-plug AG Drive, 1 DWPD2 x 900GB 15K RPM SAS 12Gbps 512n 2.5in Hot-plug Hard Drive PowerEdge R450 Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM Dual, Hot-plug, Power Supply Fault Tolerant Redundant (1+1), 800W, Mixed Mode,NAFAdditional Ethernet Port of make: Broadcom 57412 Dual Port 10GbE SFP+, OCP NIC 3.0 (applicable for Application server only)DVD +/-RW, SATA, Internal, USB Keyboard and Mouse, etc and other necessary items and all software required for running server smoothly.Note: Server configuration are given considering upto 10000 nos of meters. 14 S & F Inverter along with tubular batteries having following specifications complete all as specified and directed by Engr-in-Charge:-(a) Capacity of 2KVA of inverter 1680 W, sine wave output.(b) Battery of 12 Volts, 150Ah tubular plates technology-2 Nos(c) High durability with sealed plastic housing(d) Comprehensive protection against short-circuit, reverse polarity, battery over charge, deep discharge etc.(e) Battery warranty of atleast 24 months (f) Intuitive display to easily understand staus of mains availability, battery status, etc.Make: Luminous, Model No : Cruze 2KVA, Battery-ILTT 18048N 150AH or techno-commercially equivalent 15 Internet Leased line of min. 10 Mbps with static IPv6 support with a pool of minimum 4 IPs for 2 year. 16 Provision of firewall with warranty & service bundle of 2 year 17 Supply & Installation of laser jet printer with single function black & white with USB connection with printing speed of min 40 pages per minute with 512MB RAM for printing Report complete all as specified and directed.Make :Kyocera kyom 2040Dn 1102S32Us0 equivalent in Canon /Epson. 18 Supply and fix all in one Desktop PC with I7 processor, 4GB RAM , 500 GB HDD, PC 21.5” monitor 1-CD/DVD Combo Drive R/WType, 4 USB port including Video card, Cordless key board & Mouse with licensed latest BOSS Operating system complete all as specified. 19 S & F UPS with following specifica&on complete all as specified and directed by Engr- in-Charge:-(a) Capacity of 600VA with output voltage 230V AC +10% of frequency 50HZ +1%. (b) Battery of 12 Volts , 7 AH-1 No with min 30 min backup with full battery condition. (c) Output waveform of pseudo Sine.(d) Off balery mode charging with high voltage protec&on.(e) Battery warrenty of atleast 5 years.Make : V-Guard/Liminous / Microtek. 20 Supply and install Split unit complete of capacity 2 TR with minimum 3 star rating EER 3.2 with connecting copper pipe with complete insulation, drain pipe ,cordless remote control unit with in built air ioniser and Plasma filter for better indoor air quality.(Note:- All drilling and hole work is included in quoted rate and will be matched with existing one.) 21 Supply and fix Voltage stabilizer for automatic operation, single phase naturallyair cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4KVA. 22 M&L for point wiring with PVC insulated unsheated stranded copper conductor cable FRLH/S of size 4 sq mm in and including PVC casing caping of required width with all necessary fittingsincluding 4 sq mm FRLH/SPVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for AC controlled by sheet metal enclosure with plug top single pole and neutral with two pin and earth plug and socket complete all as specified and directed. 23 Supply and fix sheet metal enclosure with socket plug top single pole and neutral enclosure with a two pin and earthplugand socket complete with one single pole MCB of capacity 20A. 24 S&F sub main wiring with two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqm as earth lead drawing into rigid PVC conduits (Heavy Grade). Note: Two run of 4 sqmm cable and one run of 4 sqmm cable will be measured as single length. 25 S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 6 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 6 sqm as earth lead drawing into rigid PVC conduits (Heavy Grade). Note: Two run of 6 sqmm cable and one run of 6 sqmm cable will be measured as single length. 26 S&F sub main wiring four run of single core PVC insulated unsheathed stranded copper conductor of size 6 sqmm & two run of PVC insulated unsheathed stranded copper conductor of size 6 sqm as earth lead drawing into rigid PVC conduits (Heavy Grade). Note: Four run of 6 sqmm cable and two run of 6 sqmm cable will be measured as single length. 27 S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 10 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 10 sqm as earth lead drawing into rigid PVC conduits (Heavy Grade).Note: Two run of 10 sqmm cable and one run of 10 sqmm cable will be measured as single length. 28 SCHEDULE A PART-II (PHASE-II) 29 Provision for outsourcing of services for comprehensive operation, manning and operation maintenanceto smart meters at MES premises and all related equipments including keeping the equipments in healthy condition by employing 01 x trained skilled person in shift 9 AM to 5 PM or any 8 hours shift as directec by Engr-in-charge (Except on sunday & holidays) having knowledge of operation of smart prepaidand postpaid meter, DCU, Repeater, MES Local server/Government community cloud, softwate application including web and mobile Apps, smart meter billing including carrying out all daily maintenance and reports all as directed by GE/Engineer-in-charge and as per Indian electricity rule / engineering practices & maintaining properly the protective instruments complete in good condition and all maintenance records, break down records, by providing with adequate details comprising of following items & equipments all as specified to the entire satisfaction of GE/Engr-In-Chargefrom completion of work till completion of defect liability period of 2 years.(a) Single phase smart meters(b) Three phase smart meters(c) Meter data management connectivity including DCU & Repeater(d) Smart meter and DCU SIM cards(e) MES Local Server (f) Software Application including web portal and Mobile AppsAll miscellaneous charges shall be included in the scope. No separate charges shall be paid to contractor in this regard during contractual period in this regard.
Contract Date: Dec 24, 2025 Contract Value : ₹ 6.24 Crore
Statutory Bodies & Commissions/Committees No of Bidders 8
West Bengal View Result →
21.
Defence #8403701 AOC
Tender For Provision Of Energy Audit At Af Stn Bhowali.; 1 Material and labour inculding testing equipment and T&P to cover the entire equipments & machines and study the pumps, distribution system and its auxiliary sevices, DG sets and their AMF panels and lighting, air compresser, for electrical energy efficency the receiving of power and its end use in motors and pumps of complete area of AGE (I) Airforce Bhowali including transportation . To use latest imported computers based electrical and thermal instruments and process flow measurement instrument for accurate measurement and recording of operational parameter of various equipment with all the safety measures. 2 (a) Preliminary site visit, data collection & walk-through audit complete all as specified and directed. 3 (b) Detailed Energy Audit of electrical systems (lighting, HVAC, motors, pumps) complete all as specified and directed. 4 (c) Power Quality Analysis (harmonics, power factor, voltage imbalance) complete all as specified and directed. 5 (d) Thermal Imaging of electrical panels complete all as specified and directed. 6 (e) Lux level and lighting system efficiency assessment complete all as specified and directed. 7 (f) Analysis of diesel generator and UPS systems (if any) complete all as specified and directed. 8 (g) Identification of Energy Conservation Measures (ECMs) complete all as specified and directed. 9 (h) Renewable Energy Feasibility Study (solar rooftop etc.) complete all as specified and directed. 10 (j) Preparation and submission of Draft and Final Energy Audit Report complete all as specified and directed. 11 (k) Presentation of findings to MES authorities complete all as specified and directe
Contract Date: Oct 27, 2025 Contract Value : ₹ 1.92 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttarakhand View Result →
22.
Defence #8239621 AOC
Bids Are Invited For Power Quality Audit Of Comcen Equipment , Package No 4 - Atal Tinkering Lab Of Niti Aayog Power Supply And Accessories And Safety Equipment Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 53,100
Government Departments No of Bidders 3
Maharashtra View Result →
23.
Defence #8219746 AOC
Tender For Provision Of Smart Meter And Allied Infra At Kalimpong Mil Station Under Ge 867 Ews.; 1 Supply, installation, commissioning and testing of AC single phase, 2 wires 10 - 60 Amps Smart Energy Meter with bi-directional communication facility & remote connect/disconnect switch including all connected accessories. The meter shall communicate with Head End System (HES) on any one of the communication technologies mentioned in IS16444 Part 1, as per the requirement complete all as specified against BOQ Srl Item No. 1.01 to 1.15 and as directed by GE. 2 BASIC FEATURES : The Smart Meter would have the following minimum basic features- Measurement of electrical energy parameters, Bidirectional Communication, Integrated Load limiting /connect/disconnect switch, Tamper event Meter End detection, recording and reporting, Power event alarms as per IS 16444 Part 1, Remote firmware upgrader, pre-paid features at MDM end (as per IS 15959 Part 2), TOD features, Net Metering (kWh) features, On demand reading. 3 GENERAL STANDARDS APPLICABLE FOR METERS are IS 13779 with latest amendments AC Static Watt-hour Meter class 1 & 2, IS 15884 with latest amendments Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class 1 and 2)- Specification, IS 16444 Part 1 with latest amendments A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2- Specification, IS 15959 Part 1 & Part 2 with latest amendments Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Standards. 4 COMMUNICATION : Meter shall have the ability to communicate with Head End System (HES) on any one of the communication technologies mentioned in IS 16444 Part 1 (RF/PLC /Cellular) in a secure manner. The selection of communication technology should be as per the site conditions and as per design consideration of AMI Implementing agency to meet the performance as per agreed Service Level Agreements (SLAs). In case of Cellular based meter, the meter shall accommodate SIM card of any service provider. In case of Plug in type communication module, the meter shall log communication module removal /non responsive event with snapshot. REMOTE CONNECT/ DISCONNECT/ LOAD LIMITING : Remote Connect/ disconnect/ Load control facilities would be as per IS 16444 part 1. 5 Once the design of AMI Solution is submitted by AMI implementing agency which will be vetted from any of these 5 companies which are agencies empanelled by REC (Secure Meters Limited, Genus Power infrastructure Limited, CyanConnode Holding pic Co,Landis+ Gyr Limited and Larsen & Turbo Limited) that maybe mix of all the technologies based on the geographical and network conditions in particular area and following parameters to be taken care (Quality of Service, Latency, Service Level Agreement , Total Cost of Ownership over 10 years, Initial Cost of Investment, Independent Infrastructure Augmentation, Auto-discovery and self-healing, Independent Troubleshooting, Communication success rate, Dependency on network provider, Additional network IED inclusion, Power Consumption and maintenance cost).Contractor have to bear the monthly rentals/ data charges for SIM/e-SIM using the network of Mobile service provider for every meter for 10 Years in case of cellular technology in case of meters which base on cellular technology (cost is deemed to be included in this) and in case of RF meters cost of DCU, Signal boosters including network management and head end system for the project areashall also be included in this item. 6 OTHER SPECIFICATIONS : Applicable Standards The meters shall comply with IS 16444 Part 1 for all requirements. Reference Voltage As per relevant IS (240 V), Current Rating10-60 A, Category UC1, Starting Current As per IS 16444 Part 1, Accuracy Class 1.0 as per IS 16444 Part 1 ,Limits of error As per IS 16444 Part 1 ,Operating Temperature range As per IS 16444 Part 1, Humidity ,Frequency, Influence Quantities , Power Consumption of meter ,Current and Voltage , Running at No Load ,Test output device , Meter Display ,Name Plate & marking Meter Display , Parameters to be measured As per IS 16444 Part 1 / As per IS 15959 Part-2,Maximum Demand resetting As per IS 15959 Part 2, Time of Use registers As per IS 15959 part 2 ,Power Quality Information As per IS 15959 part 2 ,LED/LCD Indicators As per IS 16444 Part 1 ,Load Survey/Interval Data As per IS 15959 part 2 ,Tamper/ Event Recording As per IS 15959 part 2, Measuring Elements As per IS 16444 part 1 Alarm As per IS 16444 Part 1/ 15959 Part 2, Load Control As per IS 16444 Part 1 ,Connect/Disconnect switch UC1( As per IS 16444 part 1) ,Status of load switch As per IS 16444 Part 1 ,Programmability As per IS 16444 Part 1 ,Communication As per IS 16444. Part 1 ,Data Exchange Protocol As per IS 16444 Part 1 ,Remote Firmware upgrade As per IS 15959 part 2, Real Time Clock (RTC) As per IS 16444 Part 1/ IS 15959 Part1 & Part 2, 7 The clock day/date setting and synchronization shall only be possible through password/Key code command from one of the following: From remote server through suitable communication network. Hand Held Unit (HHU) or Meter testing work bench and this shall need password enabling for meter. Data Retention As per CEA regulations Battery Backup Meter shall be supplied with separate battery backup for RTC. Guarantee 120 months from the date of supply. (The meter which are found defective/inoperative at the time of installation or become inoperative/defective within the guarantee period, the same shall be replaced/repaired by the manufacturer/supplier within one month of receipt of report. It should be replaced within one month of receipt of report for such defective/inoperative meters First Breath(power on) and Last gasp (power off) condition detection and communication to HES As per IS 16444 Part 1 .Plug-in Communication Module The Smart Meters shall be have a dedicated sealable slot for accommodating plug-in type bi - directional communication module which shall integrate the respective communication technology (RF/PLC/ Cellular) with the smart meters, leading to easy adaptability for network interfaces (WAN/NAN).The Plug-In module shall be field swappable/ replaceable. 8 DATA DISPLAY FACILITY (AUTO) Data Display shall be in two modes 1. Auto Scroll 2. Scroll with Push Button The display parameters shall be:Display Check, Date and Time, Last Recharge Amount, Last Recharge Time, CurrentAvailable Balance Amount, Current Balance Time ,Cumulative Active Energy kWh with legend, Current calendar month MD in kW with legend, Instantaneous voltage, Instantaneous Phase current, Instantaneous Load kW,Instantaneous average Power Factor. These parameters should be displayed on the Meter Display continuously for a period of 10 seconds on Auto scroll. 9 Scroll with push button : All Parameters mentioned under Auto-Scroll mode should be displayed. Additionally, the following Parameters shall also be displayed:- Internal diagnostics (display check), Meter Serial No., Last month cumulative kWh with legends, Last month MD in kW with legends, Current month Average Power Factor, Last month Average Power Factor. Further, the Meter should display High Resolution energy values with resolution of 3 digits before decimal and 2 digits after decimal in push button mode. The meter’s display should return to default display mode (continues auto scroll) if push button is not operated for more than 10 seconds. Meter display should not go in to sleep mode during Power-On condition, Last token recharge. 10 ANTI TAMPER FEATURES The meter shall continue recording energy under tamper conditions as defined in IS 15959 Part 2 and would log the event and send alarm at Head End System after detection of the defined theft features as per IS 15959 Part 2. TESTS : Type Tests & Test Certificates Smart meter shall be type tested for all the tests as per IS: 16444 Part 1 (latest version) in a third party independent lab. The number of sampling for testing of meters and criteria for conformity would be as per IS 16444 Part 1 (as amended up to date). Necessary copies of test certificates shall be submitted. Routine & Acceptance Tests : The Factory Acceptance and Routine tests shall be carried out as per IS 16444 Part 1. The Meter (without communication module) shall be immune under external magnetic influences and shall be tested for high voltage discharge as per CBIP 325. 11 GENERAL & CONSTRUCTIONAL REQUIREMENTS : Meter shall be BIS marked as per IS 16444 Part 1.General & construction requirement shall be as per IS 16444/IS 13779. METER BASE & COVER- Meter base & cover shall be as per IS 16444 Part1 / IS 13779. The meter Base & cover shall be ‘Break to open’ design. The material for meter base and cover shall be made of high grade polycarbonate. TERMINAL BLOCK & COVER - As per IS 16444 Part 1/IS 13779.DESIGN: Voltage circuit, sealing arrangement, terminal block, terminal cover and nameplate etc. shall be in accordance with IS-16444 Part 1 (latest version). The meter shall be compact and reliable in design, easy to transport and immune to vibration and shock involved in transportation and handling. 12 NAME PLATE AND MARKING : The name plate on the meter should be clearly visible, effectively secured against removal and indelibly/distinctly marked in accordance with relevant IS. In addition, “Name of the Utility”, purchase order no. & year/month of manufacturing shall be provided on the name plate. The rating plate information shall be as per relevant IS. CONNECTION DIAGRAM : As per IS 16444 Part 1 .FIXING ARRANGEMENTS : The meter shall be mounted type. The Meter should have three fixing holes, one at top and two at the bottom. The Top hole should be such that the holding screw is not accessible to the consumer after fixing the meters. The lower screws should be provided under sealable terminal cover. 13 SEALING ARRANGEMENT : Arrangements shall be provided for proper sealing of the meter cover so that access to the working parts shall not be possible without breaking the seal. The sealing arrangement and number of seals shall be as per relevant IS/ requirement of utility.METER BOX : The Meter Box of suitable size would be provided and the material of the meter box should be such that it does not hamper communiations. 14 TESTING AND MANUFACTURING FACILITIES AT MANUFACTURER’S PLACE : The manufacturer shall have facilities of conducting Acceptance Testing as per IS 16444 Part 1. INSPECTION : The utility/ purchaser will inspect the meter randomly as per sampling plan for acceptance test as per IS 16444 Part 1. The meters shall be tested for acceptance test as per IS 16444 Part 1. 15 Makes of Meters (a) Genus Power Infrastructures Limited.(b) Secure Meters Limited.(c) L&T Electrical & Automation(d) Honeywell Elster(e) Landis+Gyr(f) Schneider Electric(g) Siemens(h) HPL (j) BENLO(k) M/s Iskraemeco India Pvt Ltd (Iskraemeco), (l) Anchor by Panasonic(m) Cyan Connode Holding Plc Co.(n) Visiontek 16 NOTE :-(a) AMI Software and associated equipment should be capable of handling at least3000 Nos. of meters of different makes as per BIS 16444 with 25% expansion without any additional infrastructure and cost implication.(b) Not more than 33% of a particular make will be installed to ensure interchangeability at a later date as per BIS 16444 with communication technology including GPRS/RF/Hybrid (GPRS+RF)/Any other advanced technology as per CEA/TRAI Guidelines.(c) The defect liability period will be 02 years from the date of completion 17 All as per Srl Item No. 1.00 & 1.01 to 1.15 but for three phase, 4 wires 10 - 100 Amps Smart Energy Meter with bi-directional communication facility & remote connect/disconnect switch including all connected accessories complete all as specified and directed. 18 Providing system software of smart metering infrastructure shall also include prepayment mode recovery of licence fee, hire charges for furniture, water charges extra. This software should have necessary fields and administrative login assets for local authority/GEto update the recovery rate from time to time.Software will be compatible with all approved makes of smart meters. Software has to be audited by CERT-India empanelled firm / CERT auditor of armed forces and all its vulnerabilities be removed. The cost of the audit will be borne by the contractor. 19 (a) Meter Data Management ModuleI. The meter data management (MDM) module is a key component of the web-based system software used for controlling smart energy meters. The MDM module is responsible for collecting, storing and managing the data collected from the smart meters. It also provides users with tools to analyse the data and generate reports.The MDM module should have the following features:II. Data collection: The MDM module should be able to collect data from the smart meters in real time. The data should be collected using a secure communication protocol. 20 III. Data storage: The MDM module should be able to store the data collected from the smart meters in a secure database. The database should be designed to efficiently store and retrieve large volumes of data.IV. Data management: The MDM module should provide users with tools to manage the data collected from the smart meters. This includes the ability to filter, sort, and search the data.V. Data analysis: The MDM module should provide users with tools to analyse the data collected from the smart meters. This includes the ability to generate reports on energy consumption, energy savings, and other key metrics.VI. Reporting: The MDM module should provide users with a variety of reports on the data collected from the smart meters. The reports should be generated in a variety of formats, such as PDF, CSV and Excel.VII. In addition to the above features, the MDM module should also be able to :-i. Integrate with other systems: The MDM module should be able to integrate with other systems, such as customer relationship management (CRM) systems and billing systems.ii. Scale to support a large number of meters: The MDM module should be scalable to support a large number of smart meters.iii. Be secure: The MDM module should be secure and protect the data collected from the smart meters from unauthorized access. 21 VIII. Meter Data Management Module: 15 Minute Instantaneous Data: The meter data management (MDM) module should be able to collect and store the following 15-minute instantaneous data from the smart meters:i. Parameter Display Checkii. Date and Timeiii. Last Recharge Amountiv. Last Recharge Timev.CurrentAvailable Balance Amountvi. Current Balance Timevii. Cumulative Active Energy kWh with legendviii. Current calendar month MD in kW with legendix. Instantaneous voltage 22 x. Instantaneous Phase currentxi. Instantaneous Load kWxii. Instantaneous average Power Factorxiii. Last month cumulative kWh with legendsxiv. Last month MD in kW with legendsxv. Current month Average Power Factorxvi. Last month Average Power Factorxvii. power factorxviii. monthly billing survey dataThe MDM module should also be able to provide users with the ability to: View the 15-minute instantaneous data for each meter in real time, Generate reports on the 15-minute instantaneous data for individual meters or groups of meters, Export the 15-minute instantaneous data to a variety of formats, such as CSV and Excel. The 15-minute instantaneous data collected by the MDM module can be used for a variety of purposes, including:i. Energy efficiency monitoring: The data can be used to track energy consumption over time and identify areas where energy efficiency can be improved.ii. Demand response: The data can be used to manage energy demand during peak periods.iii. Billing: The data can be used to generate accurate and timely bills for customers.iv. Power quality monitoring: The data can be used to monitor the quality of the electrical power supply and identify any potential problems.v. Asset management: The data can be used to monitor the performance of smart meters and other electrical assets 23 (b) Billing Module forWeb-Based Software : The software must be able to collect data from the meters, calculate energy consumption and billing determinants and generate bills for both post-paid and prepaid customers. The software must also include functionalities for tariff setup in an easy manner, bill format setup, bill adjustment, occupation billing, and vacation billing. The web-based software must meet the following specific requirements:I. Data collection: The software must be able to collect data from the smart energy meters in real time or on a scheduled basis. The data must include energy consumption, voltage, current and power factor. 24 II. Energy consumption and billing determinant calculation: The software must be able to calculate energy consumption and billing determinants based on the collected data and the applicable tariff. The billing determinants must include the total energy consumed, the total amount due and any applicable taxes and fees.III. Bill generation: The software must be able to generate bills for both post-paid and prepaid customers. The bills must be accurate and easy to understand. The bills must include the following information:IV. Customer name and account numberBilling periodEnergy consumedTotal amount dueApplicable taxes and feesV. Tariff setup: The software must allow the user to set up tariffs for different types of customers and energy usage patterns. The tariffs must be flexible and scalable.VI. Bill format setup: The software must allow the user to set up the bill format. The bill format must be customizable to meet the specific needs of the GE.VII. Bill adjustment: The software must allow the user to adjust bills for various reasons, such as meter errors or customer disputes.VIII. Occupation billing: The software must be able to generate bills for customers who are temporarily occupying a property, such as tenants or Airbnb guests.IX. Vacation billing: The software must be able to generate bills for customers who are on vacation and have reduced energy consumption. 25 X. Post-paid and prepaid billing: The software must be able to support both post-paid and prepaid billing systems. The software must allow the user to switch between the two systems as needed.XI. The web-based software must also meet the following additional requirements: Security: The software must be secure and protect customer data from unauthorized access. Scalability: The software must be scalable to accommodate future growth in the number of smart energy meters and customers. Ease of use: The software must be easy to use for both administrators and customers. Support: The vendor must provide adequate support for the software. 26 (b) The web-based software must meet the following requirements:i. Data collection: The software must be able to collect data from the smart meters in real time. The data should include the following: Meter identifier, Date and time, Energy consumptionii. Occupation and vacation module: The software must have a module that supports occupation and vacation billing. This module should allow the customer to switch between post-paid and prepaid functionalities as required. 27 iii. Billing reports: The software must be able to generate billing reports for customers. The reports should include the following information: Customer name, Customer address, Meter identifier, Billing period, Energy consumption, Billing determinant.iv. Access for staff and occupants: The software should provide access to staff and occupants for the data. Staff should have access to all of the data, while occupants should only have access to their own data.v. Website for GE/AGE/BSO: The software should include a dedicated login id for the GE, AGE and BSO to view all of the data and informationvi. Admin access for MES: The designated users in MES should have admin access to the application.vii OEM Specific. Android and iOS mobile apps: The software should include Android and iOS mobile apps for the user to monitor their own data and balance on a regular basis.viii. Customer Portal: The system should include a customer portal for the resident public customer/occupant to login and view their own energy and billing data. This would be on Android and iOS mobile apps.ix. Energy Accounting Module: The system should include features of energy accounting. The system should be able to account for total energy block wise, facility wise and would also love calculation of unaccounted energy in case total energy meter is also available.x. Communication Module: The system should provide communication of energy data and bills via print, email and SMS methods.xi. Master Data: The system should support meter master data repository. The system should support meter replacement process. The system should support exporting of metering and billing data in Excel, PDF and various other formats. 28 xii. Customer Care Module: The software should include a customer care module where the user would be login any complaints. The system provider would monitor the complaints and carry out the necessary activities for the complaint resolution.xiii. Meter Installation Module: The software would include an air-based meter installation module where the meter installation or changes can be captured on the app itself and the reading may be demonstrated to the user if required on the app itself.xiv. Activities, Communication of the various activities such as occupation, Kisan Mitra change, personal detail change, etc. with the user as well as the department on email.xv. Payment Gateway: One payment gateway would be installed provided bank account is opened at GE level.xvi. Warranty and Maintenance: The system and system software should have a warranty and maintenance period of 10 years, including over operating expenses such as GPRS charges and hosting charges.xvii. Integration / interface of the AMI system with application system like metering/ billing/ collection. Interface has to be provided in the proposed solution to upload and process meter data from these system.xviii. Integration of different devises of different make/equipment/software’s covered in the scope of the project with each other as per functional require, met including water charges, furniture and license fee. 29 xix. Additional Requirements The web-based software should also be able to: Generate reports on the 15-minute instantaneous data for individual meters or groups of meters, Export the 15-minute instantaneous data to a variety of formats, such as CSV and Excel, Integrate with other systems, such as customer relationship management (CRM) systems and billing systems, Scale to support a large number of meters, Be secure and protect the data collected from the smart meters from unauthorized access, Training of staff on how to use the web-based software.xx. Head-End System (HES) is a central system in an advanced metering infrastructure (AMI) that is responsible for collecting, storing, processing, and analysing data from smart meters. it that communicates with the smart meters over a network.• Data collection: The HES collects data from smart meters on a regular basis, typically every 15 minutes or hour. This data can include energy consumption, voltage, and current readings. 30 • It should be suitable to support the collection and storage of15 minute interval data from end point.• Data storage: The HES stores the collected data in a database for future analysis and reporting.• Data processing: The HES processes the collected data to identify trends and patterns. This information can be used to improve energy efficiency, reduce peak demand, and provide more accurate billing.• Data analysis: The HES analyzes the collected data to generate reports and dashboards that can be used by utility companies to make informed decisions about their operations 31 • The HES is typically a web-based application that can be accessed from anywhere with an internet connection. This allows utility companies to monitor and manage their AMI systems remotely.• Here are some examples of tasks that can be performed using a HES: View real-time energy consumption data for individual customers or groups of customers, Identify customers who are experiencing outages, Detect and prevent energy theft, Send alerts to customers about high energy usage or other potential problems, Generate reports on energy usage, peak demand, and other key metrics• Pl add the following functionalities: field replaceable, modular communication module, pairing with communication module, Geo location identification, time synchronization. 32 Cyber Security : Following points to be ensured by the contractor for making the entire AMI system and all its elements including service provider immune to cyber attacks. No plls to be used in the system. All the hardware, OS and application software shall be hardened. Application, scanning and hardware scanning tools shall be provided to identify vulnerability & security threats. Data shall be encrypted at system / device / technology level. While procuring cyber security items testing must be done and the system must be secure by design. Residual information risk shall be calculated by contractor and the same shall be submitted for perusal of cyber audit teams. Penetration & vulnerability assessment test from certified auditors during Field Acceptance Test (FAT), Site Acceptance Test (SAT) & Operations and Maintenance Period.CRET Audit of Smart Metering System at the time of commissioning shall be carried out. Subsequent audit of the system shall be carried out after every three years. Cost of such audits and rectifications thereof shall be borne by the contractor. 33 Cloud Service Requirements upto 3000Smart Meters including 25% spare with backup server.The Cloud Service Provider (CSP) must be empanelled by the Ministry of Electronics and Information Technology (MeitY) of India. The CSP must be able to provide the following cloud services for the smart meter system:(a) Compute: The CSP must provide sufficient compute resources to handle the data processing requirements of the smart meter system. This includes real-time data processing, analytics, and machine learning.(b) Storage: The CSP must provide sufficient storage capacity to store the data collected from the smart meters for a period of at least 5 years. The storage must be highly reliable and scalable.(c) Networking: The CSP must provide a secure and reliable network connection between the smart meters and the cloud platform.(d) Database: The CSP must provide a database service to store and manage the smart meter data. The database must be scalable to accommodate the growing volume of data.(e) Analytics: The CSP must provide analytics services to enable the smart meter operator to gain insights from the data collected by the smart meters.(f) Machine Learning: The CSP must provide machine learning services to enable the smart meter operator to develop and deploy machine learning models to improve the efficiency and effectiveness of the smart meter system. 34 (g) Internet of Things (IoT): The CSP must provide IoT services to enable the smart meter system to connect to and manage other IoT devices.(h) Security: The CSP must provide security services to protect the smart meter system from cyberattacks. This includes data encryption, authentication, and authorization.(i) Management tools and services: The CSP must provide management tools and services to enable the smart meter operator to manage the cloud platform and the smart meter system.The CSP must also be able to meet the following specific requirements for the smart meter system:(a) The CSP must be able to store and manage the data collected from the smart meters in a secure and compliant manner. The data must be encrypted at rest and in transit. The CSP must also comply with all applicable data privacy and security regulations. 35 (b) The CSP must be able to provide real-time data access to the smart meter operator. This is required to enable the smart meter operator to monitor the smart meter system and to identify and respond to any issues in real time.(c) The CSP must be able to provide high availability and scalability for the smart meter system. The system must be able to handle the expected load of 3000 smart meters, and it must be able to scale to accommodate additional smart meters in the future.Additional Technicalities(a) In addition to the above requirements, the following technicalities shall be considered when selecting a CSP for smart meter system:(b) Support for IoT protocols: The CSP should support the IoT protocols that will be used by the smart meters. This will ensure that the smart meters can communicate with the cloud platform without any problems.(c) Security features: The CSP should offer a variety of security features to protect the smart meter system from cyberattacks. This includes features such as data encryption, authentication and authorization.(d) Compliance: The CSP should comply with all applicable data privacy and security regulations. This is important to ensure that the smart meter system is compliant with all relevant laws and regulations.(e) Following basic security features should be ensured by cloud service provider. Strong encryption capabilities for data in transit or at rest, Identify and Access Management(IAM), Managed Threat Detection, Manage DDoS Protection,Web Application Firewall Key Management Services (KMS), Certificate Manager, Cloud Hardware Security Module (CHSM), Additional Third Party Security tools like Intrusion Detection System (IDS), Intrusion Prevention System (IPS) and System Information and Event Management (SIEM). 36 Supply and installation of the following with basic training:-(a) All-in-One PC Specification• Processor: Intel Core i7-13700K• Memory: 32GB DDR5-RAM 4800 MT/s• Storage: 1TB M.2 PCle NVMe SSD• Display: 27-inch 4K Full HD IPS display with 120Hz refresh rate and G-SYNC/FreeSync support• Graphics Card: NVIDIA GeForce RTX 4050 or higher with 2 GB GDDR6 graphics memory • Operating System: Windows 11 Pro• Microsoft Office 365 and Quickheal Antivirus for 10 years. 37 (b) Fibre to the Home (FTTH) Broadband Connection: Minimum 300Mbps Fibre to the Home (FTTH) broadband for 10 years (cost is deemed to be included in this).(c) LaserJet All-in-One Printer Specification.• Print Speed: Up to 30 pages per minute (PPM) in black and white, up to 25 PPM in color• Scan Resolution: 1200 x 1200 dpi• Copy Resolution: 600 x 600 dpi• Paper Capacity: 500-sheet input tray, 100-sheet output tray• Duplex Printing: Automatic duplex printing• Wireless Printing: Yes(d) Workstation Specification• Desk: Adjustable height desk with a work surface that is at least 36 inches wide and 24 inches deep• Chair: Ergonomic chair with adjustable height, backrest, and armrests• Monitor Arm: Monitor arm to mount the all-in-one PC monitor to the desk• Cable Management: Cable management system to hide and organize the cables from the all-in-one PC, printer and other devices 38 Provision of comprehensive operation including smart meter billing (complete AMI System including cloud and workstation, broad band) from completion of work till the completion of defect liability period of 02 years. It include telecom charges and broadband charges for 02 years from date of completion of work during defect liability period complete all as specified and directed. NOTE : The rate for complete comprehensive operation for 24 Months of each smart meter shall be deemed to be included in the quoted rate. 39 Provision for Comprehensive operation and maintenance of system including project implementation and management (complete AMI System including cloud, workstation, broadband). all expenditures, smart meter billing and maintenance after completion of defect liability period for 08 years. It included telecom charges and broadband charges for 08 years after date of completion of defect liability period complete all as specified and directed.NOTE : The rate for complete comprehensive operation and maintenance of system for 96 months of each smart metershall be deemed to be included in the quoted rates. 40 M&L for submain wiring with approved colour coding as per IS with two runs 6.0 Sqmm nominal area single core PVC insulated FRLSH cable with stranded copper conductor and drawing into and including suitable size of PVC non-metallic rigid heavy duty medium grade PVC conduit of white / ivory colour and its all accessories (ISI marked) heavy duty of suitable size and one run 6.0 Sqmm nominal area single core PVC insulated FRLSH cable with stranded copper conductor as earth wire including concealed in wall / ceiling etc and making good the disturbed surface as per existing complete all as specified and directed.NOTE(a) Cost of making good the disturbed surfaces (if any) & matching to the existing / original surface is deemed to be included in the quoted rate.(b) Two (02) runs of 6.00 Sqmm main copper conduction, one (01) run of 6.00 Sqmm copper earth conductor and one (01) run of PVC conduit shall be measured and paid as one unit length. 41 M&L for submain wiring with approved colour coding as per IS with four runs 6.0 Sqmm nominal area single core PVC insulated FRLSH cable with stranded copper conductor and drawing into and including suitable size of PVC non-metallic rigid heavy duty medium grade PVC conduit of white / ivory colour and its all accessories (ISI marked) heavy duty of suitable size and one run 6.0 Sqmm nominal area single core PVC insulated FRLSH cable with stranded copper conductor as earth wire including concealed in wall / ceiling etc and making good the disturbed surface as per existing complete all as specified and directed.NOTE(a) Cost of making good the disturbed surfaces (if any) & matching to the existing / original surface is deemed to be included in the quoted rate.(b) Four (04) runs of 6.00 Sqmm main copper conduction, one (01) run of 6.00 Sqmm copper earth conductor and one (01) run of PVC conduit shall be measured and paid as one unit length.
Contract Date: Nov 07, 2025 Contract Value : ₹ 69.70 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
West Bengal View Result →
24.
Public Administrative Department #8107378 AOC
Tender On Empanelment Basis For Purchasing And Installing Cameras And Other Related Equipment In The Municipal Corporation Dewas Office And Corporation Owned Buildings And Main Places For The Year 2025-26-- 1 details 2 Supply, installation testingandcommissioning of 4CHnetworkvideo recorderwith real-time recording: up to 4MP resolution live view, preview and playback/up to 4 channels at 1080p,withinbuilt PoE, up to 1TB supports complete with UL certification 3 Supply, installation testingandcommissioning of 8CHnetwork video recorderwith real-time recording: up to 4MP resolution live view, preview and playback/up to 8 channels at 1080p,withinbuilt PoE, up to 1TB supports complete with UL certification 4 Supply, installation testingandcommissioning of 16channelNVRwith1080p real-time live viewH.265/H.264MJPEGdualcodecdecoding up to 12MP resolution preview&playback max320MBPSincomingbandwidthsupport2 SATAHDDs up to 16TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification 5 Supply, installation testingandcommissioning of 8portPoEswitchwith2SFPports,having securityfeatures likeport securitysupports64 MACs per port, auto surveillance VLAN, loopbackdetectionautomaticallydisablesaport when a loop is detected, cable diagnostics allowsadministrators todeterminecablestatus, UTP cat. 5, cat. 5e (100mmax.), full/half duplexfor10/100MBPS, full-duplexfor1000 MBPS, autoMDI/MDIX adjustment for all twisted-pair ports, switching capacity, 40 GBPS,maximum64bytes packet forwarding rate,14.88MBPS, ports1to8compliantwith 802.3at 6 Poe Switch 4 Port Gigabit Hikvision/cp plus/dahua/d-link 4x6 PoE Switch (4 POE Ports +2 Uplink), 802.3af/at PoE+ 10+100+1000Mbps, 100W Built-in Power, Extend to 250Meter,Unmanaged Metal Plug and Play with supply & Installation 7 Supply, installation testingandcommissioning oftheIPruggeddomecamerashallbeequipped with a 1/3″ 4MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps)/2688×1520images, a2.8mmfixedlens, andawaterproof (IP66) IK10 impact-resistant camerahousing,asatrueday/nightsolution,the camera shall use smart IR technology and provideup to98ft (30m)of IRillumination. ThecamerashallacceptPoE(802.3af)or12V DC power input. min. illumination:-0.08 lux [email protected](color, 1/3s, 30IRE),0 luxB/W [email protected])videocompression: H.265 +, noise reduction: 3DNR,backlight compensation :-TrueWDR120DB, angleof view 104°/87° (H), 57°/48° (V) ,UL listed 8 6 MP IP Indoor CAMERA Hikvision/cp plus/dahua/d-linkHigh quality imaging with 6 MP resolutionEfficient H.265+ compression technologyClear imaging against strong backlight due to 130 dB WDR technologyBuilt-in microphone for real-time audio security(-U)24/7 colorful imaging Water and dust resistant (IP66) Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.1/1.2, WSSE and digest authentication for Open Network Video InterfaceColor: 0.0005 Lux @ (F1.0, AGC ON), 0 Lux with white lightMain Stream 70 Hz: 30 fps (3072×2048 2592x1520,2048x1536 1920 × 1080, 1280 × 720) with supply & Installation 9 6 MP IP Outdoor CAMERA Hikvision/cp plus/dahua/d-linkHigh quality imaging with 6 MP resolution, Efficient H.265+ compression technologyClear imaging against strong backlight due to 130 dB WDR technologyBuilt-in microphone for real-time audio security(-U) , 24/7 colorful imagingWater and dust resistant (IP66) Password protection, complicated password, HTTPS encryption, IP address filter,Security Audit Log, basic and digest ,authentication for HTTP/HTTPS, TLS 1.1/1.2, WSSE and digest authentication for Open Network Video InterfaceColor: 0.0005 Lux @ (F1.0, AGC ON), 0 Lux with white lightMain Stream 70 Hz: 30 fps (3072×2048 2592x1520,2048x1536 1920 × 1080, 1280 × 720) with supply & Installation 10 Bullet Camera 4MP Hikvision/cp plus/dahua/d-link(2560 × 1440)@25/30fps, and 4MP (2688 × 1520)@20fpsH.265+/ H.264+ dual-stream encodingWDR(120dB), Day/Night (ICR), 3D-DNR, ROI, AWB, AGC, BLC, HLC3.6mm fixed lens (2.8mm optional).IR Range of 30 Mtrs, IP67, PoE. with supply & Installation 11 Dom Camera 4MP WDR IR Network Dome Camera Hikvision/cp plus/dahua/d-link- 30Mtr.1/3” 4MP PS CMOS Image Sensor (0.84667cm)Max. 4MP (2560 × 1440)@25/30fps, and 4MP (2688 × 1520)@20fps.H.265+/ H.264+ dual-stream ncodingWDR(120dB), Day/Night (ICR), 3D-DNR, ROI, AWB, AGC, BLC, HLC3.6mm fixed lens (2.8mm optional)IR Range of 30 Mtrs, IP67, PoE.Mobile Software: with supply & Installation 12 4 Channel Network Video RecorderHikvision/cp plus/dahua/d-link4 Channel Up to 8MP Resolution for Preview and Playback , HDMI/VGA simultaneous video output H.265/H.264 codec decoding , Max 80Mbps Incoming Bandwidth , Support IPC UPnP, 4PoE ports Support ANR technology to enhance the storage reliability when the network break down 1 SATA III Port ,Up to 6TB capacity for each HDD , RCA , Support ONVIF OEM No Logo.Support upgrade firmware with supply & Installation 13 Supply, installation testingandcommissioning of32channelNVRwith1080preal-time live viewH.265/H.264MJPEGdualcodecdecoding Up to12MP resolutionpreview&playback max320MBPSincomingbandwidthsupport4 SATAHDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification 14 Media Convertor Hikvision/cp plus/dahua/d-link Single Mode Media Converter 10/100/1000BASE-TX Ethernet twisted-pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for single-mode distance Is 30Kms or 100km and for multi-mode distance is 2kms. with supply & Installation 15 1 TB Surveillance Internal Hard Drive 1TB HDD is 3.5 inch HDD interface with SATA 6Gb/s and 64 Cache (MB). Image Perfect firmware supports 24×7 surveillance-optimized workloads tuned to record about 90% of the time and play back video footage the remaining 10%, and supports more cameras recording at higher resolutions than traditional drives Lower power consumption means a reduction in heat emissions, which improves reliability in surveillance solutions. Tarnish-resistant components helpprotect drive from environmental elements, increasing field reliability Best-Fit Applications are Network Video Recorders (NVR), Embedded Surveillance DVRs (SDVR), Hybrid Surveillance DVRs, and Surveillance DVRs with supply & Installation 16 Providing &fixing of 2 TB hard disk 17 4 TB Surveillance Internal Hard Drive4TB HDD is 3.5 inch HDD interface with SATA 6Gb/s and 64 Cache (MB). Image Perfect firmware supports 24×7 surveillance-optimized workloads tuned to record about 90% of the time and play back video footage the remaining 10%, and supports more cameras recording at higher resolutions than traditional drives Lower power consumption means a reduction in heat emissions, which improves reliability in surveillance solutions. Tarnish-resistant components helpprotect drive from environmental elements, increasing field reliabilityBest-Fit Applications are Network Video Recorders (NVR), Embedded Surveillance DVRs (SDVR), Hybrid Surveillance DVRs, and Surveillance DVRs with supply & Installation 18 Power Supply 8 Channel Hikvision/cp plus/dahua/d-link8ch power supplyInput voltage: 180~264VAC,Output voltage: 12V DC,Current Range: 0~10A,Ripple & Noise (max.): 100mVp-p Rated Power: 120W,Voltage Adj. Range: 11.4~13.2V Voltage Tolerance: ±2.0%,Line Regulation: ±1.0% with supply & Installation 19 4 Channel DVR (Digital Video Recorder): Hikvision/cp plus/dahua/d-link A device that records video footage from the cameras Auto Adaptive HDCVI/AHD/TVI/CVBS/IP signals:Supportupto 8MP IP Camera, Max 24Mbps Incoming Bandwidth: H.265Plus /H.265 dual-stream Video Compression, HDMI / VGA Simultaneous Video OutputSupport 1 SATA HDD up to 10TB, 2 USB Ports(2.0) with supply & Installation 20 8 Channel DVR (Digital Video Recorder): Hikvision/cp plus/dahua/d-link A device that records video footage from the cameras Auto Adaptive HDCVI/AHD/TVI/CVBS/IP signals,Supportupto 8MP IP Camera Max 48Mbps Incoming Bandwidth,H.265+ /H.265 dual-stream Video Compression, HDMI / VGA Simultaneous Video Output, Support 2 SATA HDD up to 10TB Each, 2 USB Ports. with supply & Installation 21 16 Channel DVR (Digital Video Recorder): Hikvision/cp plus/dahua/d-link A device that records video footage from the cameras Supports HDCVI/AHD/TVI/CVBS/IP video inputs, Max 24 channels IP camera inputs, each channel up to 4MP , Max 96Mbps Incoming Bandwidth H.264+/H.264 dual-stream video compression Support 2 SATA HDD up to 8TB Each, 2 USB Ports HDMI / VGA Simultaneous Video Output. with supply & Installation 22 32 Channel DVR (Digital Video Recorder): Hikvision/cp plus/dahua/d-link A device that records video footage from the cameras H.265/ H.264 dual-stream video compression, All channel 1080N Non- Realtime RecordingSupport AHD, TVI,CVI, CVBS, IP Video input,HDMI / VGA simultaneous video output Support 2 SATA HDD up to 16TB, 2 USB2.0. with supply & Installation 23 Supply, Installation testingandcommissioning oftheIPbulletcamerashallbeequippedwitha 1/2.82MPprogressivescanCMOSimager to capturefullHD1080p(25/30fps)images,a3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provideup to98ft (30m)of IRillumination. ThecamerashallacceptPoE(802.3af)or12V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :-H.264, noise reduction: 3DNR,backlight compensation : BLC/HLC/DWDR, encodemode:-CBR/VBR (freely adjustable in CBR, 5 levels in VBR) 24 Supply, Installation testingandcommissioning of theIPdome camerashallbeequippedwith a1/2.82MPprogressivescanCMOSimagerto capturefullHD1080p(25/30fps)images,a3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provideup to98ft (30m)of IRillumination. ThecamerashallacceptPoE(802.3af)or12V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :-H.264, noise reduction: 3DNR,backlight compensation : BLC/HLC/DWDR, encodemode:-CBR/VBR (freelyadjustableinCBR,5levelsinVBR).UL liste 25 2 MP Camera HD Colour View Bullet Hikvision/cp plus/dahua/d-link TRUE WDR, 130DB, 20 M WHITE LIGHT DISTANCE, Ã? IP67 2 MEGAPIXEL HIGH-PERFORMANCE CMOS, ANALOG HD OUTPUT1080P RESOLUTION, FULL TIME COLOR, OSD MENU, 3D DNR, UP THE COAX(HIKVISION-C), 4 IN 1 VIDEO OUTPUT (SWITCHABLE TVI/AHD/CVI/CVBS). with supply & Installation 26 2 Mp Camera Hd Dom Colour View Hikvision/cp plus/dahua/d-link TRUE WDR, 130DB, 20 M WHITE LIGHT DISTANCE, Ã? IP67 2 MEGAPIXEL HIGH-PERFORMANCE CMOS, ANALOG HD OUTPUT1080P RESOLUTION, FULL TIME COLOR, OSD MENU, 3D DNR,UP THE COAX(HIKVISION-C), 4 IN 1 VIDEO OUTPUT (SWITCHABLE TVI/AHD/CVI/CVBS). with supply & Installation 27 4 Channel Camera Supply Hikvision/cp plus/dahua/d-link Compatible Devices Security Cameras CCTV Power Supply for 4 Channel (12V 5 Amp) SMPS (Switch Mode Power Supply) with Voltage Booster Technology. with supply & Installation 28 Ultra microSD UHS-I Card 64GB, 120MB/s Up to 120MB/s transfer speeds let you move up to 1000 photos in a minute [32GB-1TB] Load apps faster with A1-rated performance Class 10 for Full HD video recording and playback. with supply & Installation 29 3 +1 Cable Per Meter CCTV Cable 3+1 / RG59 Coaxial Copper Coil D-link/Hikvision/Cp plus. with supply & Installation 30 BNC Connector Bnc Male Connector for CCTV Camera. with supply & Installation 31 DC Connector 12V DC 5.5x2.1mm Female DC Power Socket Jack Connector Cable Plug Wire for CCTV LED, Light etc. Female DC Power Socket Jack Connector Cable Socket Wire. with supply & Installation 32 MIC CCTV Pickup Audio Surveillance Microphone MIC for CCTV Systems. with supply & Installation 33 Supply, installation testingandcommissioning of2MPIPPTZcamerashallbeequippedwitha 1/2.8exmorCMOSimager tocapturefullHD 1080p(50/60fps)/25xzoomimages,4.8mm 120mm, andawaterproof (IP66) IK10impact resistant camera housing, as a true day/night solution, the camera shall use Smart IR technologyandprovideupto328ft (100m)of IRillumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:[email protected](color,1/3s, 30IRE),0luxB/[email protected]) videocompression:-H.265+,noisereduction: 2D/3D,backlight compensation :-TrueWDR 120 DB, built-in analytics, including face detection, automatically restores to previous PTZand lens poSITCionafter power failure preset speed pan: Up to 240°/s, tilt: Up to 200°/s, angle of view H: 59.2° – 2.4° ,UL listed 34 LED TV Monitor: 32 inch A display device to view the live footage and play back the recorded videos. Android Yes, Patchwall, Netflix, Prime Video, Live TV, Youtube, Youtube Music, Google Play Movies, Gallery, Help, Media Player, Miracast, Google Play Games, Play Store, TV Manager. with supply & Installation 35 LED TV Monitor: 40 inch A display device to view the live footage and play back the recorded videos. Android Yes, Patchwall, Netflix, Prime Video, Live TV, Youtube, Youtube Music, Google Play Movies, Gallery, Help, Media Player, Miracast, Google Play Games, Play Store, TV Manager. with supply & Installation 36 AC1200 Mbps 4G+ Cat6 Mobile Wi-Fi Router Dual Band Wireless WiFi, 4G/3G Network SIM Slot Unlocked, No Configuration Required, Support Guest Network & Parental Control, Dual Band. with supply & Installation 37 Camera PVC Box PVC Junction Box for CCTV Camera Mounting 4x4. with supply & Installation 38 Bullet Camera Stand 360 Degree CCTV Camera Pole Bracket Hoop Mounting Bullet Camera Stand Bracket. with supply & Installation 39 Dual Band Router Hikvision/cp plus/dahua/d-link 2.4, 5 ghz 802.11ac Wave2 WiFi —— 867 Mbps on the 5 GHz band and 400 Mbps on the 2.4 GHz band;BoostedWiFi Coverage —— 4 antennas provide stable wireless connections and optimal coverage MU-MIMO —— Easy network management 2X efficiency by communicating with up to 2 devices at once; Beamforming — Beamforming technology delivers a highly efficient wireless connection AP Mode —— Supports Access Point mode to create a new WiFi access point; Intelligent Connection —— Smart Connect directs clients to the less congested band and Airtime Fairness optimizes the time usageEasy Setup —— Easy network management Security Protocol: Wpa, Wpa2, Wpa3, Wpa/Wpa2-Enterprise (802.1x). with supply & Installation 40 PVC DVR/Server | Network Cabinet Box | Rack for CCTV DVR/NVR/POE Switch and CCTV SMPS Smart Management with Power Socket Ideal for 4/8 Channel CCTV System for Both Indoor and Outdoor Purpose. with supply & Installation 41 4U Rack with 3-4 Power socket Cooling fan and lock Rack Standard : Conforms to DIN 41494 or equivalent standard Construction : Welded Front Door : Lockable Toughened Glass Door Basic Frame : Steel Equipment Mounting : DIN Standard Slots Mounting Angle : 19” Mounting angles made of formed steel Standard Finish : Powder Coated Top and Bottom Cover : Welded to Frame, Vented and Field Cable entry exit cut outs Standard Color : Grey Static . with supply & Installation 42 Supply, installation testingandcommissioning of outdoorPTZIRultra lowlight IPcameras with fullHD1080presolution,25/30fpsimage witha1/1.9in.2MPsensor, trueWDR120dB ensures glare-free images, 6.0-180mm, F1.6 F4.8, 30x optical zoom lens with 360° continuous rotationfor theflexibilitytoclearly view the target areawith desiredwidth and depth,H.264andMJPEGcodec, triplestream support, IR LEDs provide up to 200 m, waterproof (IP67) and IK10 vandal resistant camera housing, ONVIF profile S compliant supportsupto128GBmicroSDHC(Class10) card for local video storagewhennetwork is interrupted. 43 3 + 1 Coaxial cable.100% solid copper cable includes video, Audio and power cable Outdoor Cable D- link/Finolex/RR. with supply & Installation 44 128 GB MicroSDXC Class 10 130 MB/s Memory Card (With Adapter). with supply & Installation 45 12V 1.5A DC Power Adapter, SMPS for LCD Monitor, TV, LED Strip, CCTV, 12 Volt 1.5A Power Adapter, AC Input 100-240V Dc Output 12 Volt 1.5 A - 2.5mm x 5.5mm Jack. with supply & Installation 46 20 Pair Krone Box with supply & Installation 47 50 Pair Krone Box with supply & Installation 48 EPABX system consists of 16 nos. extensions, 8 nos of junction &upto 64 nos. of expandable eport, with one operating console, 1.35 Amp max. current 49 Epabx System 308 for 3 P&T Line-In and 8 Extensions Intercommunication between all 8 Extensions LED Display. (Panasonic/ Crystal/ Matrix). with supply & Installation 50 Epabx System 104 CLI (with PS) CLI available on all Instrument 1 Trunk 4 Extension. (Panasonic/ Crystal/ Matrix). with supply & Installation 51 Telephone Instrument (Basic Phone). with supply & Installation 52 Telephone Instrument (Caller ID Wired Phone ). with supply & Installation 53 Single Core Fiber Optic Drop Cable With Double Jacket with supply & Installation 54 Fiber Optic Joint Box ( 2 Hole ) Termination Enclosure Box OFC Splicing Tray. with supply & Installation 55 CAT 6 RJ45 patch cord UTP 1 metre 56 CAT 6 RJ45 patch cord UTP 2 metre 57 CAT 6 RJ45 patch cord UTP 3 metre 58 CAT 6 RJ45 patch cord UTP 5 metre 59 Supply, installation testingandcommissioning oftheIPbulletcamerashallbeequippedwitha 1/3 4MPprogressive scanCMOS imager to capturefullHD1080p(25/30fps)/2688×1520 (20fps) images, a 3.6mmfixed lens, and a waterproof(IP66)IK10impact-resistantcamera housing, As a true day/night solution, the camera shall use Smart IR technology and provideup to98ft (30m)of IRillumination. ThecamerashallacceptPoE(802.3af)or12V DC power input. min. illumination:-0.08 lux [email protected](Color, 1/3s,30IRE),0luxB/W [email protected])videocompression: H.265 +, noise reduction: 3DNR,backlight compensation :-TrueWDR120DB, angle of view :-104°/87° (H), 57°/48° (V),UL listed 60 Supply, installation testingandcommissioning oftheIPbulletcamerashallbeequippedwitha 1/2.5″8MPprogressivescanCMOSimager to captureultraHD4K/8MPresolutionat15fps or3MPat25/30fps,a4.0mmfixedlens,anda waterproof(IP66)IK10impact-resistantcamera housing,asatrueday/nightsolution, thecamera shallusesmartIRtechnologyandprovideupto 98 ft (30m) of IR illumination. The camera shall acceptPoE(802.3af)or12VDCpower input.min. illumination:0.07 lux (color)/0 lux (B/W) @F2.0 (with IR LEDs on)) video compression :-H.265 , noise reduction: 3DNR,Backlight Compensation :-DWDR, angleof viewhorizontal: 88°vertical: 48°,UL listed 61 Supply, installation testingandcommissioning of24portPoEswitchwith4SFPports,having securityfeatures likeport securitysupports64 MACs per port, auto surveillance VLAN, loopbackdetectionautomaticallydisablesaport when a loop is detected, cable diagnostics allowsadministrators todeterminecablestatus, UTPCat. 5, Cat. 5e (100mmax.), full/half duplexfor10/100MBPS, full-duplexfor1000 MBPS, autoMDI/MDIX adjustment for all twisted-pair ports, switching capacity, 56 GBPS,maximum64bytes packet forwarding rate, 41.7mbps, Ports 1 to24 compliantwith 802.3 at 62 Providing &fixing of 4 TB hard disk 63 Supplyinganddrawingco-axial T.V. cableRG-6 Grade, 0.7 mm solid copper conductor PE insulated, shieldedwithfinetinedcopperbraidand protected with PVC sheathed in existing surface/concealed, steel/PVC conduit as required. 64 Supplying and drawing following pair, 0.5mm PVC insulated copper conductor unarmoured telephone cable in existing surface/concealed, steel/PVC conduit as required Telephone wire 0.5 mm, 1 Pair 65 Supplying and drawing following pair, 0.5mm PVC insulated copper conductor unarmoured telephone cable in existing surface/concealed, steel/PVC conduit as required Telephone wire 0.5 mm,2 Pair 66 Supply, fixingand testingRJ-11 telephone jack single with shutter F.T 67 Supply, fixingandtesting ofRJ11telephonejack modular (1 Module) 68 RJ-45computersocketcat6withshuttermodular (1Module) 69 RJ-45computersocketcat6tool lessconnection (1Module) 70 Supply, installationtestingandcommissioningRJ 45 computer jack cat 6 with shutter modular (2Module 71 Supplyinganddrawing4pair un-shielded twisted pair (UTP), 0.5 mm PVC insulated copper conductorun-armouredCat-6computercableFRLS in existing surface/concealed, steel/PVC. conduit/ casing-n-capping as required. 72 Supplyinganddrawing4pairshieldedtwistedpair (STP),0.5mmPVCinsulatedcopperconductorun armouredCat-6computer cableFRLS inexisting surface/concealed, steel/PVC. conduit/ casing-n capping as required 73 1 Metre, HDMI cord 74 2 Metre, HDMI cord 75 Supply, installation testingand commissioningof 19modularpatch-1Upatchpanel24,RJ45cat-6 connector 76 6Ucabinetwithmin.Dimensions 366X600X600, wallmountingwith6point 5Amp. socket power supplystrip, and fan, cablemanager, trayas per Site requirement 77 9Ucabinet withmin. Dimension 488X600X600, wallmountingwith6point 5Amp. socket power supplystrip, and fan, cablemanager, trayas per Site requirement 78 12Ucabinetwithmin.Dimension590X600X600, wallmountingwith6point 5Amp. socket power supplystrip, and fan, cablemanager, trayas per Site requirement 79 15Ucabinetwithmin.Dimension615X600X500, wallmountingwith6point 5Amp. socket power supplystrip, and fan, cablemanager, trayas per Site requirement 80 22Ucabinetwithmin.Dimensions1150X600X600, floormountingwith power supply and fan, tray. Equipment support angle, vertical cablemanager, 12 point 5Amp. vertical power strip, earthing continuitykit,castors(1setof4nos.),captiveH/W set of 10, fan tray with 4 fan, for computer . 81 SITC of 6 Core OFC Cable with Armored Uni‐Tube, 9/125μm,OS 2 Type, . Complying to ISO/IEC 11801, EN50173, ANSI/TIA 568-C.3, Telcordia GR-20, Uni-tube construction,Water BlockingThixotropicGel (Tube) PetroleumJelly (Interstices) inindoor /outdoorducts,directburial and backbone cabling 82 SITC of 12 Core OFC Cable with Armored Uni‐Tube, 9/125μm,OS 2 Type, . Complying to ISO/IEC 11801, EN50173, ANSI/TIA 568-C.3, Telcordia GR-20, Uni-tube construction,Water BlockingThixotropicGel (Tube) PetroleumJelly (Interstices) inindoor /outdoorducts,directburial and backbone cabling 83 SITCof1MtrOFCSMPatchCordwith9/125µm, OS2 , DuplexZipcord , SC-LC/LC-LC / SC-SC connecctor , 900µ tight buffer, ISO/IEC 1108:2008, ANSI/TIA/ EIA 568.C.3, ANSI/TIA/EIA-492, TELECORDIA GR-409, ICEA-596 84 5-Port Gigabit UnmanagedDesktop Switch. Fast andReliableNetworking.1000Base-TInterface:5. AutoMDI/MDIX.SwitchingCapacity : 10Gbps. OperationTemperature 0~40 °C. Power Input AC：100 ~ 240 V. 85 8-Port Gigabit UnmanagedDesktop Switch. Fast andReliableNetworking.1000Base-TInterface:8. AutoMDI/MDIX.SwitchingCapacity : 16Gbps. OperationTemperature 0~40 °C. Power Input AC：100 ~ 240 V. 86 16-Port Gigabit Unmanaged Desktop Switch. 1000Base-T Interface : 16. Auto MDI/MDIX .Switching Capacity : 32 Gbps. Operation Temperature0~40 °C. Power InputAC：100~ 240 V. 87 24-PortGigabitUnmanagedDesktopSwitch. Full wire-speed data transmission. Energy-efficient design. 1000Base-T Interface : 24. Auto MDI/MDIX .Switching Capacity : 48 Gbps. OperationTemperature 0~40 °C. Power Input AC：100 ~ 240 V 88 3MP Image sensor (2304x1296@15fps) Super Wide Viewing Angle H.265 Video Compression Support 4G SIM Built-in Mic & Speaker Night Vision of upto 30 Mtr. Support Two-way Talk Support Private Mode Support 256GB SD card Support Human Body Detection Support Built in Siren ONVIF Support RTMP Support Support RJ45 LAN port Support 256GB SD card Support RJ45 LAN port Support 256GB SD card 89 3MP image sensor (2304*1296@ 15fps) H.265 Video Compression Lan Port Support Built-in Mic & Speaker Supports Full-Colour Night Vision (Auto, IR, Colour) Supports Two-way Talk Supports Motion Detection Supports Human Body Detection Supports Siren Supports 256 GB SD card Supports Private Mode Supports Onvif Supports RTMP Supports Web access 90 4MP 2560*1440@15fps H.265 video compression Built in MIC and Speaker Full Color Mode IR Night vision upto 30 Meters Built in Siren Human body detection Motion tracking Private mode 256GB SD card support Built in Battery 18000mAh 91 4G SOLAR CAM *4G SOLAR DUAL CAM 10X PTZ (G6)* SOLAR PANEL+BATTERY.DUAL CAM. 10X PTZ (40 TO 50 METER ZOOM). 4G SIM BASED. 128 GB MEMORY SUPPORT. DAY AND NIGHT COLOR. TWO WAY TALK. IP66 WEATHER PROOF. 92 Network camera series CV: Compact camera series 2041: 4MP resolution G2: Second generation I: IR (Infrared) capabilityD: Dome form factor W: Wi-Fi connectivity (W): White color housing Key specifications likely include: 4 Megapixel resolution Wi-Fi connectivity Infrared night vision Compact dome design Indoor use Connectivity Ports (likely): Ethernet RJ-45 port (potential PoE support) Power input connector Possible microSD card slot for local storage Reset button May include alarm I/O ports 93 Network camera series CV: Compact camera series 2041: 4MP resolution G2: Second generation I: IR (Infrared) capabilityD: Bullet form factor W: Wi-Fi connectivity (W): White color housing Key specifications likely include: 4 Megapixel resolution Wi-Fi connectivity Infrared night vision Compact Bullet design OutDoor use Connectivity Ports (likely): Ethernet RJ-45 port (potential PoE support) Power input connector Possible microSD card slot for local storage Reset button May include alarm I/O ports 94 8TB Surveillance Internal Hard Drive HDD Specifications: Basic Specifications: Capacity: 8TB Interface: SATA 6 Gb/s Cache: 256 MB Form Factor: 3.5 inch Type: Specialized for surveillance/continuous recording Typical Performance Characteristics: Designed for 24/7 operation Optimized for multiple HD video streams Enhanced durability for surveillance workloads Lower power consumption compared to standard desktop drives Typically supports 8-64 camera systems 95 Technical Specification - Outdoor Wireless Access Point 5 GHz 802.11a/n/ac Omnidirectional coverage Dual-core 716 MHz CPU, 128 MB RAM 5x Gigabit Ethernet ports PoE powered IP55 weatherproof IP55weatherproof -40°C to +70°C operating temperature Integrated firewall, QoS, VLAN, hotspot functions 360° coverage, up to 867 Mbps data rate Wall/pole mountable 96 GHz 802.11a/n Compact squarish form factor Directional antenna with 16 dBi gain Single-core 650 MHz CPU 64 MB RAM Single Gigabit Ethernet port Single Gigabit Ethernet port Passive PoE powered (8-30V) Weatherproof outdoor enclosure Operating temperature: -40°C to +70 °C RouterOS Level3 license 802.11n MIMO 2x2 Up to 150 Mbps data rates Pole-mountable design Low power consumption (~5W)
Contract Date: Oct 14, 2025 Contract Value : ₹ 7.92 Lakh
Local Bodies No of Bidders 2
Madhya Pradesh View Result →
Maharashtra View Result →
Maharashtra View Result →
27.
Health and Family Welfare #7639619 AOC
Re E-Tender For Procurement Of Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Adhesive (Copolymer) Based Silk Tape, Non-Elastic Tape With Strong Tensile Strength, 7.50 Cm (Minimum) X 9M (Minimum) . , Adhesive Elastic Bandage (10Cm X 6 Mtr.) , Adhesive Plaster Plain 10 Cm X 10 M , Adhesive Plaster Plain 5 Cm X 10 M , Adhesive Plaster Plain 7.5 Cm X 10 M , Adhesive, Paper Adhesive Plaster 5.00 Cm (Minimum) X 9M (Minimum) , Breathable And Comfortable, Non Woven Adhesive Tape , Adhesive, Paper Adhesive Plaster 7.50 Cm (Minimum) X 9M (Minimum) , Breathable And Comfortable, Non Woven Adhesive Tape , Adhesive, Transparent Polyethylene Surgical Tape : Perforated, Breathable, Polyethylene, Transparent Backing With Straight And Easy Bi-Directional Tear, Coated With Pressure Sensitive, Hypoallergenic Acrylate With High Adhesive Strength Tape (6.5Cm - 8 Cm X 8.5M - 10M) , Adhesive, Transparent Polyethylene Surgical Tape : Perforated, Breathable, Polyethylene, Transparent Backing With Straight And Easy Bi-Directional Tear, Coated With Pressure Sensitive, Hypoallergenic Acrylate With High Adhesive Strength Tape 4.5Cm - 5.5 Cm X 8.5Cm - 10Cm , Epidural Kit, Assorted Size. 16/18, 17/19 & 18/20 : Complete Epidural Kit Wit Epidural Catheter Made Of Polyamide + Plyurethane Having 3/ 6 Lateral Eyes, 3 Embedded Line For X Ray Visibility, Tuhey Needles, 0.2 Micron Filter, Lor Syringe. , Portable Spot Light And Stand With Led Lamps, Min 35,000 Lux , Resuscitation Bags 220Ml-240Ml/500Ml -635Ml/750Ml - 1475Ml Quantity Technical Specification: 1.Self Inflating Bag 2. Provided With Closed Ended Reservoir (Autoclavable) With Two Valves 3. Face Masks: 3 Sizes: 0&1/ 2&3 /4&5: 2 Of Each Size Per Bag Making 2 Set 4. Its Fitted With Safety Valve Set At 40 Cm H2o, Has An Outlet For Pressure Monitoring 5. Bag Should Be Made Of Sterilisable Medical Grade Synthetic Material Like Silicone Etc.6. Patient Valve Should Be Well Sealed, Have Minimum Dead Space And No Forward Or Backward Leaks 7. The Bag Should Have An Oxygen Inlet Which Fits Into The Standard Oxygen Tubing Both From A Cylinder And Central Supply. 8.Reusable Face Masks Should Be Transparent, Fit The Patient Outlet Of The Bag Easily And Have Minimum Dead Space. 9. The System Should With Stand Washing Scrubbing And Autoclaving Procedures, Chemical Sterilization. , Scissor, Sharp-Blunt Scissors. One Pointed & One Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. 8 Inch. Curved, Made Of German Ss , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 9, Curved, Made Of German Ss. , Suture Material, Double Armed Polyester, 1/2 Circle Tapercut, 17-25Mm, Multistrand (5 Green And 5 White) With Pledget, Size - 2/0, Length Min 75 Cm. , Suture Material, Silk, Black, Fine In Reels Of 25 Mtrs Size 4/0 And 5/0 , Artificial Discs Titanium With Flange,Low Profile. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Balloon Flow Assisted Temporary Pacing Electrode, Size : 4 & 5 Fr.• Depth Marking Aid In Positioning Electrode.• Should Be Balloon Tip. , Billiary Uncovered Stent- Special Design For Low Migration. Non-Traumatic Ends Of The Stent. Highly Flexible And Kink Resistant Braided Catheter. Lower Shortening, Ro Markers At The Middle And Both Ends. Stent Dia : 10 Mm, Stent Length: 60Mm, 80Mm, 100 Mm. , Capd Adapter (Titanium) , Capd Minicap. , Capd Transfer Set. , Control Cable Detacher (Electrical/Hydraulic) Thermoelectric Detachment Cable For Detaching Coils. Hydraulic Detachment Cable For Detaching Coils. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Cranial Stent Device With Delivery System And Retrieval System Close Cell Design Intracranial Stent Delivered Through 0.021” Microcatheter & For One Diameter Fits Arteries 2Mm-4Mm. Stent Retriever System With Closed Distal End Basket. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Cutting Balloon-2,2.5 & 3.• Diameter – 2, 2.5, 2.75, 3.0 Mm.• Scoring The Plaque By Severing The Elastic And Fibrotic Continuity Of The Vessel Wall• Dilating The Lesion At Lower Pressures With Less Recoil• Lumen Gain Through Plaque Compression Instead Of Vessel Wall Expansion. , Ecg Gel, Accessories Of Ecg Machine- Gel Hypoallergic 250 Ml Container With Nozzle , Extra Wide Spherical Microcoil For Aneuysm Platinum Frame Spherical Coils For Medium To Wide Neck Aneurysms, 10 & 18 System Coils 2Mm To 18Mm Extrawide. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Guiding Sheath Size : 5,6,7Fr. Length -45,65,90Cm.• Soft Atraumatic Tip.• Cross-Cut Hemostasis Valve. , Handle, Bp Various Sizes For Interchangeable Blades, Is 3319/Iso/Qms Certificate From The Nabcb Accredited Bodies , Microscope, Binocular, Complete With 2 Eye Pieces And 3 Or 4 (Scanner) Objectives Including Oil Immersion Is: 4381 Along With Is:15269, Is: 8725 And Is: 15268 , Microscope, Ent Operating Microscope : • Apochromatic Optics With Magnification Range 0.4X2.5X Or More. • Working Distance : F=200Mm To 400Mm) • Fine Focusing Range Upto 14Mm Motorize Or Manual. • Straight Binocular Tube F=170Mm Interpupillary Distance Adjustment From 55Mm To 75Mm Or • 180 Degree Tiltable Tube F=170Mm Or Straight Binocular Tube F=170Mm • Pair Of Widefield Push-In Eyepieces 10X12.5X With Sleeves And Magnetic Lock, Diopter Setting From -8D To +5D • 120 Degree Coupling(Usp Point Can Also Use E.G Swivel Coupling Depending On The Need) • Lateral Double Handgrips • Coaxial Fiber Optic Illumination System With Proper Back Up. • Dual Lamp System With Quick Change Over. • Continuously Lamp Intensity Adjustment By Control Knob Near To The Surgeon. • Automatic Lamp Cut Off By Moving Up The Carrier Arm Ensuring Optimal Usage Of Bulb • Stable And Sturdy Floor Stand On Found Lockable Castors, Column(Height : Minimum 1.7M) • Spring Balance Articulated Arm, Carrier Arm, Power Supply Unit, Light Guide 2M, Power Cable. • Sterilization Rubber Caps For All Knobs, Dust Cover. • Co2 Laser Adaptability Should Be Possible. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Microtips 2-200 Micro Litre • Length -50Mm • Should Be Dnase, Rnase And Pyrogen Free • Should Have Very Low Coefficient Of Friction. • Should Be Made Of Medical Grade Polypropylene • Should Be Free Of Lubricants, Dyes And Heavy Metals. , Miniplates For Bone Flap Fixation Titanium,2.5Mm Width + Length Various Sizes, Compatible With 3-25Mm Screws , Refrigerators 210 ± 5 Litres, Bee 5 Star Energy Consumption Rating, Complete With Automatic Voltage Stabiliser Is 302 : Part 2 : Sec 24, Is:15750, Is 1476, Is 10542/Iso/Qms Certificate From The Nabcb Accredited Bodies , Renal Stent -4,5,6 & 7Mm.• Stent Base Should Be Cobalt Chromium.• Should Be Rapid Exchange Delivery System (0.014” / 0.36Mm)• Should Be Shaft Size 80 & 120 Cm. , Sheath Femoral Size : 5/6/7/8 & 9 Fr.• Sheath Length 10 Cm / 11Cm.• Should Be Available Entry Needle 18G. , Silver Ion Impregnated Or Hydrophilic And Benzalkonium Chloride Impregnated Triple Lumen Central Venous Catheter : Triple Lumen Pur Catheter, Polymerized With Biguanide Materials Having Antimicrobial Efficacy, Nitinol Guidewire, Valve Needle & Safesite Connector For Needle Free Injection. , Sterilizer, Instrument Sterilizer Table Model, Size: 430X200x150 Mm. Ø Electric Instrument Sterilizer & Boiler- Made Of High Quality Stainless Steel Seamless Used For Sterilization/ Disinfection Of Surgical Instruments. Ø It Is Fitted With Thermostat & Tray Lifting Arrangement. Ø Material: Rust Proof Stainless Steel 304 Grade. Ø Electric Instrument Sterilizer & Boiler. Ø Stainless Steel 304-Grade, Seamless Construction Fitted With Thermostat & Tray Lifting Arrangement. Ø Instrument Sterilizer: Bis Marked, Is: 5022. Ø Size: Medium Size: 430X200x150 Mm. , Sterilizer, Instrument Sterilizer Table Model, Size: Large Size: 510X200x150 Mm. Ø Electric Instrument Sterilizer & Boiler- Made Of High Quality Stainless Steel Seamless Used For Sterilization/ Disinfection Of Surgical Instruments. Ø It Is Fitted With Thermostat & Tray Lifting Arrangement. Ø Material: Rust Proof Stainless Steel 304 Grade. Ø Electric Instrument Sterilizer & Boiler. Ø Stainless Steel 304-Grade, Seamless Construction Fitted With Thermostat & Tray Lifting Arrangement. Ø Instrument Sterilizer: Bis Marked, Is: 5022. Ø Size: Large Size: 510X200x150 Mm. , Sterilizer, Portable, Vertical, Pressure Type Is 8462 , Stethoscope For Neonates Is 3391/Iso/Qms Certificate From The Nabcb Accredited Bodies , Temporary Pacing Electrodes, Size :5Fr.,6Fr & 7Fr.• Should Be Depth Marking Aid In Positioning Electrodes. , Trachael Intubation Stylet : 1. Intubatio Stylet Having A Walking Stick Design For Insertion Into The Endotrcheal Tube Prior To Intubation. 2. Choices Of Length From 225, 335, 365Mm To Fit Most Adult And Paediatric Tracheal Tubes. 3. Made Of Malleable Aluminium To Easily Adapt To Any Desired Shape. 4. Single Use, Sould Be Available In A Sterile Package, Latest Free. , Tracheostomy Tube : Tracheostomy Tube Non-Cuffed, Size 4, 4.5,5,5.5,6,6.5. Smooth Rounded Tip Obturator. Should Be Soft, Flexible Tube Free Of Plasticizers And Latex. , Transradial Diagnostic Catheter. Size : 5 Fr. & 6Fr• Double Mesh Constriction .• Shape Should Be Tigher Right.• Catheter Length Should Be 100Cm. , Basic Set – Procedure Pack Contains Essential Items Needed For A Number Of Common Procedures Including Lumber Puncture, Spinal Anaesthesia, Epidural Anaethesia, Liver Biopsy, Paediatric Surgery, Oncology Etc. (Also Offers Custom Made Service) I. Tray Ii. Syringe Luerslip Iii. Aperture Drape Iv. Galipot V. Prep Forceps Vi. 4 Ball Swab (Small) Vii. 2 Ball Swab (Large) Viii. 1 Filter Needles 5 Um Ix. 3 Hypodermic Needles 18G, 21G & 25G X. 1 Outer Wrap 75 X 70 Cm Xi. Absorbent Towel 33 X 38 Cm , Cuff Manometer (Cuff Inflator Pressure Gauge): 1. Allows Controlled Initial Cuff Inflation. 2. Intermittend Pressure Monitoring Facility. 3. Instant Visual Confirmation Of Intra-Cuff Pressure. 4. Simple Operation Of Pressure Adjustment Without Need For Disconnection Or Introduction Of Syringe Into System. 5. Solid Green Zone Indicates Ususal Cuff Pressure Range For Tracheal & Tracheostomy Tubes. 6. Connecting Tube Is Supplied With The Gauge For Convenient Positioning. 7. Portable Gauge And Clips Easily Into Pock. , Disposable Fluid Warmer Tubing, * Blood And Iv Fluid Warmer Set With Injection Port. , Disposable Suction Pod Stabilisation System For Cabg, The Pod Should Rotate 3600 , Ear Speculas Specification : A. Troeltschs Ear Specula, Adult Size, Set Of 3. B. Troeltschs Ear Specula, Infant Size, Set Of 3. , Intubating Stylate – Small, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Intubating Stylet – Large, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Jobson Horne Probes Specification : A. Double Ended – Serrated Tip & Smooth Ring, Length 140 Mm. B. Made Up Of Good Quality Rust Free Stainless Steel Materials. , Mono Leaflet Mechanical Prosthetic Mitral / Aortic Valve With Elevated Pivot Guards • Mono Leaflet Rotatable Or Tilting Disc Rotatable • Swing Ring Hence-25 Alloy • Disc Made Of Uhmpe • Swing Ring Made Of Polyester , Mouth Gag , Mox (Connector) With Pressure Gauge , Mox-26 Oxygen Pressure Reducing Valve , Multiple Clip Applicator - Should Be 20 Titanium Clips Of Different Sizes With Precise Angled Jaws. Anti Drop Rachet. Latteral Transverse Inner Grooves. , O2 Recovery Kit For Tracostomy With Separet Valves And Star Lumen Crush Technology O2 Tube , Oxygen Cylinder - Fine Adjustment Valve Only , Oxygen Cylinder Key For Valve Bull Nose Type , Pediatric Shunt, Size - 3, 3.5, 4 & 5 Mm, * Shunt Should Be Made By Ptfe. * Shunt Length Should Be 10Cm,* Shunt Should Be Used In Cardiac Procedures. , Pin Index Valve For O2 And N2o For Anaesthetic Apparatus , Positive Airway Pressure System : 1. 22Mm Od Patient End To Accommodate Mounthpiece. 2. Scalloped Ambient Air Inlet With Gaps To Resist Occlusion. 3. Pressure Port With White Sealing Cap, To Allow Connection To A Gauge For Easy Monitoring. 4. Gas Inlet Port To Allow Connection To O2 Source With A Flow Meter. 5. Can Be Used In Conjunction With Aerosol Medication (E.G Nebulizer) Via 22Mm Connection. 6. Available With A Disposable Manometer. 7. Transparent Design For Visual Monitoring Of Contaminants. , Ptfe Membrance Patch For Reconstraction In Congenital Cardiac Surgery , Ptfe Vascular Graft Of Different Sizes (5Mm To 8Mm) - Plain , Ptfe Vascular Graft Of Different Sizes (6Mm To 8Mm) – Ring Reinforce , Reusable Introducer : 1. Reusable Introducer To Have A Coude/Angled Tip To Easily Identify Tracheal Rings In Difficult Intubatiions. 2. Clear Gratuaded Markings To Indicate Intubation Depth. 3. Size : 15Ch, 60 Cm 4. Should Be Latex Free. , Laryngeal Mask Airway With Integrated Gastric Access Port (Second Generation), Sizes- 2, 2.5, 3, 4 I) Reusable Upto 30 Times Ii) Autoclavable Iii) Soft, Should Be Made Of Silicon/ Pvc Iv) Integrated Gastric Channel For Drainage Of Gastric Contents V) Provided With Introducer Vi) Inflatable Dorsal Cuff Which Should Withstand Esophageal Pressure Of 50 Cm H2o , Uncuffed Fenestrated Tracheostomy Tube Kit : 1. Should Have Uncuffed Tracheostomy Tube Kit. 2. Should Have 2 Fenestrated Inner Cannulae That Has A Pull Ring That Aids Which Aids In Smooth Insertion And Removal From Tube, Minimizing Patient Trauma. 3. Should Have A Cleaning Brush To Clean The Tracheostomy Tube And Inner Cannula. 4. Should Have A Tracheostomy Tube Holder. , Advance Vaccum Stabilization: Stabilizer With Ball Attachment , Suction 360 Degree Articulation Maximizes Vessel Access And Stabilization , Malleable Footprint. , Catheter, Pulmonary Balloon Angioplasty Catheter , Endoscopic Universal Cutter Cum Stapler, Size : 30 Mm Powered Endocutter With Dual Safety System That Includes A Manual Over Ride System, Can Accomodate All Sizes Of Cartridges. Articulating , Shaft Length -4.4 To 6 Cm Firing Stroke Indicator And Must Have Interchangable 6 Rows Of Staple. , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Equipment Should Be Us Fda/ Ce/ Bis/ Cdsco Approved (Us Fda/ Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/ Cdsco Is Not Available). 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 6. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).
Contract Date: Jul 23, 2025 Contract Value : ₹ 1
Government Departments No of Bidders 55
West Bengal View Result →
Maharashtra View Result →
29.
Defence #7560985 AOC
Bids Are Invited For Power Audit Of Gpu , Power Quality Analyzer Total Quantity : 3
Contract Date: Ref. Documents Contract Value : ₹ 72,000
Statutory Bodies & Commissions/Committees No of Bidders 2
Maharashtra View Result →
30.
Health and Family Welfare #6690244 AOC
E-Tender For Procurement Of Different Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Artificial Discs Titanium With Flange,Low Profile Usfda/Ec Approved Manufacturer , Bain Circuit : Coaxial Bain Circuit (Disposable Pvc) 1.8 Meter , Balloon Flow Assisted Temporary Pacing Electrode, Size : 4 & 5 Fr.• Depth Marking Aid In Positioning Electrode.• Should Be Balloon Tip. , Billiary Uncovered Stent- Special Design For Low Migration. Non-Traumatic Ends Of The Stent. Highly Flexible And Kink Resistant Braided Catheter. Lower Shortening, Ro Markers At The Middle And Both Ends. Stent Dia : 10 Mm, Stent Length: 60Mm, 80Mm, 100 Mm. , Capd Adapter (Titanium) , Capd Minicap. , Capd Transfer Set. , Cibidi Plastic Biliary Stent Straight/Pigtail - Designed For Biliary Drainage Applications. Used For Strictures In The Biliary Tree. Type: Pigtail, Diameter: 10 F, Length : 5/7/10/12 Cm; Pigtail, Diameter : 7 F, Length : 5/7/10/12 Cm; Straight, Diameter : 10 F, Length : 7/10/12/15 Cm; Straight, Diameter : 7 F, Length : 7/10/12Cm , Connector - Y Assorted Sizes. - Pvc Materile Sterile Pack. , Control Cable Detacher (Electrical/Hydraulic) Thermoelectric Detachment Cable For Detaching Coils. Hydraulic Detachment Cable For Detaching Coils Usfda/Ec Approved , Cranial Stent Device With Delivery System And Retrieval System Close Cell Design Intracranial Stent Delivered Through 0.021” Microcatheter & For One Diameter Fits Arteries 2Mm-4Mm. Stent Retriever System With Closed Distal End Basket Usfda/Ec Approved , Cutting Balloon-2,2.5 & 3.• Diameter – 2, 2.5, 2.75, 3.0 Mm.• Scoring The Plaque By Severing The Elastic And Fibrotic Continuity Of The Vessel Wall• Dilating The Lesion At Lower Pressures With Less Recoil• Lumen Gain Through Plaque Compression Instead Of Vessel Wall Expansion. , E.C.G. Electrode, Disposable , Ecg Gel, Accessories Of Ecg Machine- Gel Hypoallergic 250 Ml Container With Nozzle , Endotracheal Tube, Double Lumen Endotracheal Tube : 1. Sizes : Left & Right (Assorted)2. Soft Round Bever Tip To Minimize Trauma To Patients. 3. Should Contain Intubation Stylet And Super Slip Suction Catheter. , Extrawide Spherical Microcoil For Aneuysm Platinum Frame Spherical Coils For Medium To Wide Neck Aneurysms, 10 & 18 System Coils 2Mm To 18Mm Extrawide Usfda/Ec Approved , Forceps Artery Mayos, Curved On Flat Box Joint (16,25 Cm.) (A. And H 14808) Is 3644/Iso/Qms Certificate From The Nabcb Accredited Bodies , Forceps, Dissecting Forceps, Round Serrated Tips, 152 Mm Is 3643/Iso/Qms Certificate From The Nabcb Accredited Bodies , Guiding Sheath Size : 5,6,7Fr. Length -45,65,90Cm.• Soft Atraumatic Tip.• Cross-Cut Hemostasis Valve. , Handle, Bp Various Sizes For Interchangeable Blades, Is 3319/Iso/Qms Certificate From The Nabcb Accredited Bodies , Ivc Filter Kit – Delivery By Femoral & Jugular.; • Should Have Introducer Sheet With Dilator.; • Should Have Introducer Radiopaque Marker With Safty Cap.; • Should Be Filter Storage Tube.; • Should Be Removable. , Lateral Mass Screws (Of Various Sizes) Polyaxial Self Tapping Screws Capable Of 45 Degree Angulation,Titanium, Compatible With 3.2 To 3.5Mm Rods. Sizes: Diameter 3.5 To 4.5Mm, Length 24Mm To 52Mm. Usfda/Ec Approved Manufacturer. , Micro Centrifuge Tubes • Capacity – 1.5 Ml • Should Be Dnase, Rnase And Pyrogen Free. • Must Have Safety Lid Lock And Lid Drop Protection. • Can Be Easily And Single Handedly Opened And Closed. • Must Have Frosted Labelling Surface That Can Withstand Centrifugation Upto 20,000 X G • Must Have Ultra Smooth Polished Interior Surface That Won’T Adhere Most Proteins. • Must Have High Clarity For Optimal Sample Visibility. , Microscope, Binocular, Complete With 2 Eye Pieces And 3 Or 4 (Scanner) Objectives Including Oil Immersion Is: 4381 Along With Is:15269, Is: 8725 And Is: 15268 , Microscope, Ent Operating Microscope : • Apochromatic Optics With Magnification Range 0.4X2.5X Or More. • Working Distance : F=200Mm To 400Mm) • Fine Focusing Range Upto 14Mm Motorize Or Manual. • Straight Binocular Tube F=170Mm Interpupillary Distance Adjustment From 55Mm To 75Mm Or • 180 Degree Tiltable Tube F=170Mm Or Straight Binocular Tube F=170Mm • Pair Of Widefield Push-In Eyepieces 10X12.5X With Sleeves And Magnetic Lock, Diopter Setting From -80D To +5D • 120 Degree Coupling(Usp Point Can Also Use E.G Swivel Coupling Depending On The Need) • Lateral Double Handgrips • Coaxial Fiber Optic Illumination System With Proper Back Up. • Dual Lamp System With Quick Change Over. • Continuously Lamp Intensity Adjustment By Control Knob Near To The Surgeon. • Automatic Lamp Cut Off By Moving Up The Carrier Arm Ensuring Optimal Usage Of Bulb • Stable And Sturdy Floor Stand On Found Lockable Castors, Column(Height : Minimum 1.7M) • Spring Balance Articulated Arm, Carrier Arm, Power Supply Unit, Light Guide 2M, Power Cable. • Sterilization Rubber Caps For All Knobs, Dust Cover. • Co2 Laser Adaptability Should Be Possible. • Must Of Us Fda Standardization. , Microtips 200 – 1000 Micro Litre • Length – 71 Mm • Should Be Dnase, Rnase And Pyrogen Free. • Should Have Very Low Coefficient Of Friction. • Should Be Made Of Medical Grade Polypropylene. • Should Be Free Of Lubricants, Dyes And Heavy Metals. , Microtips 2-200 Micro Litre • Length -50Mm • Should Be Dnase, Rnase And Pyrogen Free • Should Have Very Low Coefficient Of Friction. • Should Be Made Of Medical Grade Polypropylene • Should Be Free Of Lubricants, Dyes And Heavy Metals. , Miniplates For Bone Flap Fixation Titanium,2.5Mm Width + Length Various Sizes, Compatible With 3-25Mm Screws , Needle, Holder, Hegars (Sims, Straight, 15 Cm.) Is 10599/Iso/Qms Certificate From The Nabcb Accredited Bodies , Pressure Bags. Is : 6194 : 1971/Iso/Qms Certificate From The Nabcb Accredited Bodies , Pur Needle Less Single Lumen Extension Tubing System To Control Infection With Neutral Displacement-10Cm./ 15Cm. , Refrigerators 210 Litres, Bee 5 Star Energy Consumption Rating, Complete With Automatic Voltage Stabiliser Is 302 : Part 2 : Sec 24, Is:15750, Is 1476, Is 10542/Iso/Qms Certificate From The Nabcb Accredited Bodies , Renal Stent -4,5,6 & 7Mm.• Stent Base Should Be Cobalt Chromium.• Should Be Rapid Exchange Delivery System (0.014” / 0.36Mm)• Should Be Shaft Size 80 & 120 Cm. , Ria Vials • Size – 12 Mm X 75 Mm • Should Be Of Natural Colour And Transparent • Polystyrene Tubes • Capacity – 5 Ml , Scissors, Straight One Round And One Sharp Point S.J.S.S. 15 Cm , Sheath Femoral Size : 5/6/7/8 & 9 Fr.• Sheath Length 10 Cm / 11Cm.• Should Be Available Entry Needle 18G. , Silver Ion Impregnated Or Hydrophilic And Benzalkonium Chloride Impregnated Triple Lumen Central Venous Catheter : Triple Lumen Pur Catheter, Polymerized With Biguanide Materials Having Antimicrobial Efficacy, Nitinol Guidewire, Valve Needle & Safesite Connector For Needle Free Injection. , Slide Glass Microscopic Smooth Edge Thin Glass For Histological And Haematological Work 3099 (Pt 1&2):1992 , Steriliser, Portable Sterilizer Made Of Steel, Nickel Plated, With Stand, Complete With Lift-Out Tray, And One Pair Of Wire Hard Less, Size 450 X 150 X 112.5 Mm. Deep Is 8462 , Steriliser, Portable Sterilizer Made Of Steel, Nickel Plated, With Stand, Complete With Lift-Out Tray, And One Pair Of Wire Hard Less, Size 500 X 200 X 150 Mm. Deep Is 8462 , Sterilizer, Portable, Vertical, Pressure Type Is 8462 , Stethoscope For Adults Is 3391/Iso/Qms Certificate From The Nabcb Accredited Bodies , Stethoscope For Neonates Is 3391/Iso/Qms Certificate From The Nabcb Accredited Bodies , Stethoscope For Paediatric Patients Is 3391/Iso/Qms Certificate From The Nabcb Accredited Bodies , Stone Retrieval Balloon Triple Port / Triple Lumen- Strong Latex Balloon. Accommodates 0.035” Guidewire. Inflation Syringe Provided With Pack. Consist Of Triple Port For Air/Water, Dye, Guidewire. Balloon Dia : 16 Mm, Wrking Length : 200 Cm, Sheath Dia : 7F, Lumen : Triple. , Temporary Pacing Electrodes, Size :5Fr.,6Fr & 7Fr.• Should Be Depth Marking Aid In Positioning Electrodes. , Titanium Screws For Cranioplasty Mesh And Bone Flep Fixation 3-25Mm Size, Self Tapping , Trachael Intubation Stylet : 1. Intubatio Stylet Having A Walking Stick Design For Insertion Into The Endotrcheal Tube Prior To Intubation. 2. Choices Of Length From 225, 335, 365Mm To Fit Most Adult And Paediatric Tracheal Tubes. 3. Made Of Malleable Aluminium To Easily Adapt To Any Desired Shape. 4. Single Use, Sould Be Available In A Sterile Package, Latest Free. , Tracheostomy Tube : Tracheostomy Tube Cuffed, Size 4, 4.5,5,5.5,6,6.5. Smooth Rounded Tip Obturator. Should Be Soft, Flexible Tube Free Of Plasticizers And Latex. , Tracheostomy Tube : Tracheostomy Tube Non-Cuffed, Size 4, 4.5,5,5.5,6,6.5. Smooth Rounded Tip Obturator. Should Be Soft, Flexible Tube Free Of Plasticizers And Latex. , Transradial Diagnostic Catheter. Size : 5 Fr. & 6Fr• Double Mesh Constriction .• Shape Should Be Tigher Right.• Catheter Length Should Be 100Cm. , Variceal Ligation Cylinder- 6 Latex Rubber Bands In Black Colour. Single Suture Release . The Bands Are Back Loaded Behind The Endoscope Lens. Trip Cord In Sheath For Easy Pushability. Available In Single Ligation Cylinder Pack Only. Dedicated Release Handle Available. , Variceal Ligation Cylinder/System- 6 Latex Rubber Bands In Black Colour. Special Handle Adapters. Single Suture Release. The Bands Are Back Loaded Behind The Endoscope Lens. Trip Cord In Sheath For Easy Pushability. Convenient Irrigation Port. Available As Complete Set And Only Ligation Cylinder. , Volume Administration Set (Infusion Set For Single Use) Sterilised For Adults Is 12655 : Part 4/Iso/Qms Certificate From The Nabcb Accredited Bodies , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 4. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 5. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).
Contract Date: Jan 20, 2025 Contract Value : ₹ 1
Government Departments No of Bidders 66
West Bengal View Result →
31.
Educational and Research Institute #5953060 AOC
Library Books Dept Books , Engineering Books , Hans B. Pacejka Tire And Vehicle Dynamics Sae International , Kartheinzbill,Bertj Breuer Brake Technology Handbook Sae International , A.K Babu Electric & Hybrid Vehicle, Khanna Publication, New Delhi - 2018 Edition , Tom Denton Electric And Hybrid Vehicles Routledge Publications , Mehrdadehsani, Yimingao, Sebastiene.Gay, Ali Emadi. Electric, Hybrid Electric And Fuel Cell Vehicles Modern, Cr Press, London, New York. , Sunil R. Pawar Electrical Vehicle Technology Notion Press Media Pvt. Ltd., Chennai. , C.P.Nakra Tractors Dhanpatrai Publishers , Donnell Hunt Andl W. Garver Farm Machinery And Mechanism Iowa State University Press , R.B.Gupta Auto Electrical And Electronic Equipments Sathyaprakshan,New Delhi , P.K.Tripathi Handbook On Electric Vehicles Manufacturing Npcs(Niir Project Consultancy Services) , S C.Jain & C.R. Rai Farm Tractor - Maintenance& Repair Standard Publishers Distributors , M.Scarborough, R.Cornwell Essentials Of Entrepreneurship And Small Business Management. Pearson Education India, Noida - 201301 , Trott Innovation Management And New Product Development Pearson Education, Noida - 201301 , Ramanisarada The Business Plan Write-Up Simplified - A Practitioners Guide To Writing The Business Plan Notion Press Media Pvt. Ltd., Chennai. , Nagendra S Entrepreneurship And Management, Pearson Education , Doshi (Et.All) Vehicle Maintenance And Garage Practice Phi Learning Pvt Ltd , Purvangmantri Electric Vehicles In A Nutshell Notion Press. , K.C.Jain,Dr.Amitr.Patil Dr. Arvind J. Bhosale,Dr. S.S. Raghuvanshi Fundamentals Of Hybrid And Electric Vehicles Khanna Publishers , A.K Babu, Automobile Electrical And Electronics. Khanna Book Publishing Co.(P) Ltd, 2Nd Edition, 2017 , Dr V M Domkundwar Automobile Engineering, 5Th Ed, Dhanpatrai& Co, 2014. , Sae Transactions The Properties And Performance Of Modern Alternate Fuels Sae Paper No.841210 , Sae Transactions Vehicle Emission. (3 Volumes). , N. V. Raghavendra And L. Krishnamurthy Engineering Metrology And Measurements Oxford University Press India, 2013. , Hucho. W.H. Aerodynamics Of Road Vehicles – From Fluid Mechanics To Vehicle Engineering Society Of Automotive Engineers, U.S, 1998. , Tamil Nadu Govt Tamil Nadu Electric Vehicles Policy 2019 & 2023. , Gus Wright, Owen C.Duffy Fundamentals Of Medium/Heavy Duty Commercial Vehicle Systems Second Edition, Cdx Learning System, Usa 2020. , Bosch Automotive Handbook, 9Thedition Sae Publication, 2022. , K.K. Ramalingam Two Wheelers Theory, Operation And Maintenance Scitech Publications (India) Pvt Ltd , K.K. Ramalingam Automobile Engineering. 2Ndedition Scitech Publications (India) Pvt Ltd , P.S.Gill A Text Book Of Automobile Engineering S K Kataria And Sons , Hatch V.Steve Electronic Engine Controls Cengage Learning , S.Ramamrtham Hydraulic Fluid Mechanics And Fluid Machines, 9Thedition, Dhanpatrai & Sons,2014 , Peter A. Claisse Civil Engineering Materials, Butterworth- Heinemann, 2016 , M. Chakraborti Estimating, Costing, Specification And Valuation In Civil Engineering, 24Thedition, M.K. Publishers And Distributors Pvt Ltd., 2010 , Walter T. Grondzik, Alison G. Kwok And Benjamin Stein Mechanical And Electrical Equipment For Buildings 11Thedition, Wiley Publisher, 2009 , B.C. Punmia, Ashok Kumar Jain ,Arun Kumar Jain ,Pande Brij Basi Lal Introductory Irrigation Engineering, 17Th Edition, Laxmi Publication, Delhi, 2021 , Dr.S.Thirugnanasambandam, Building Repairs And Maintenance, Annamalai University, Tamil Nadu, 2023 , Thomas L.Floyd Electronic Device, 10Thedition,2018 Pearson Education , S.Salivahanan And S.Arivazhagan Digital Circuits And Design,5Th Edition, 2019 Vikas Publishing House Pvt. Ltd , Ernest O. Doubling Measurement Systems: Applications And Design, 1St Edition, Tata Mcgraw-Hill , Gerd Keiser Optical Fiber Communication, 5Thedition, 2017 Mcgraw Hill , W.C.Y. Lee Mobile Cellular Telecommunications, Analog And Digital Systems, 2Nd Edition,2017, Mcgraw Hill , Tom Denton And Hayley Pells Electric And Hybrid Vehicles, 3Rdedition, 2024 Routledge , Chandrakant.D.Patel And Chun-Hsienchen Digital Manufacturing: The Industrialization Of Art To Part”, 3D Additive Printing, Elsevier , R.G.Gupta Audiovideosystems,2Nd Edition, 2017 Mcgraw Hill , M.Morris Mano And Michael D.Ciletti Digital Design, 6Th Edition,2018 Pearson Education , T.R. Sharikaand P.S.Archana Introduction To Artificial Intelligence, 2023 Sharika T R Publisher , P.S.Gill Geometric Dimensioning And Tolerancing - 2013 S.K.Kataria & Sons , Dr. Jayakumar Total Quality Management, 7Thed Laxmi Publications,2014 , R.S.Khurmi, J.K.Gupta A Text Book Of Workshop Technology, 2Nded S.Chand Publications , Luqman Midhat Plastics Technology - 2012 Cbs Publishers & Distributers , V.K.Metha &Rohit Metha Principles Of Electrical And Electronics Engineering - 2005 S.Chand , John W.Webb Programmable Logic Controller Principles And Applications - 2003 , Meyron Begman Manufacturing Process, 5Thed Tata Mcgraw Hill , Andrew Parr Hydraulics A Technician’S And Engineer’S Guide - 2011 Butterworth-Heinemann , Akshat Bansal & Akriti Agarwal Comparison Of Electric And Conventional Vehicles In Indian Market: Total Cost Of Ownership, Consumer Preference And Best Segment For Electric Vehicle(Ijsr) , Tv.Sundararajamoorthy& N. Shanmugam Machine Design Anuradha Publications , Andrew Parr Hydraulics And Pneumatics Jaico Publishing House , V.G.Patel Entrepreneurship Development Programme In India, Entrepreneurship Development Institute Of India, Ahmedabad , M.S.Ramesh, C.C Pattanshetti, Madumathim.Kulkarni, Business Communication R.Chand & Co, New Delhi. , D.D Sharma Marketing Research Principles, Applications & Cases Sultan Chand & Sons, New Delhi. , C.B. Gupta, N.P.Srinivasan Entrepreneurial Development Sultan Chand & Sons, New Delhi. , K.Aswathappa International Business Tmh Company Ltd, New Delhi. , Prasanna Chandra Financial Management Tata Mcgraw Hill Education Private Limited, New Delhi. , T.R. Banga & S.C. Sharma Engineering Economics And Management Khanna Publishers, New Delhi,2001 , Kesavan R; Elanchezhian C Ramnathvijaya B Process Planning And Cost Estimation New Age International Publishers,2015. , Heinz Weihrich, & Harold Koontz Management Global Perspective, 10Thed Mcgraw Hill International. , M.Govindarajan S.Natarajan Principles Of Management Prentice Hall Of India Pvt.Ltd., New Delhi,2009 , Heinz Heisler Vehicle And Engine Technology. Vol. I 1998 , Elbs , Arora And Domkundwar, A Course In Refrigeration And Air-Conditioning, 2018. Dhanpat Rai & Co. Ltd, , Rs Khurmi, J.K.Gupta A Text Book Of Refrigeration And Air-Conditioning, (S.I Units) 2011 (Fifth Revised Edition). S. Chand Publications , Roy Dossat Principles Of Refrigeration (Si Units), 2002 Pearson Publications , Dr.Lal Jayamaha Energy-Efficient Building Systems: Green Strategies For Operation And Maintenance ,2007 Mcgraw Hill , R.K.Rajput Heat And Mass Transfer (Si Units) 2018 (Revised Edition). S. Chand Publications , Normen N Potter Food Science Cbs Publishers , R.S.Khurmi Steamtablesin Si Units S. Chandpublications , P.K.Nag Applied Thermodynamics, 2004 Tata Mcgraw Hill , Arora, Domkundwar A Course In Heat And Mass Transfer (S.I Units) 2007. Dhantpatrai & Co Pvtltd , C.P.Arora Refrigeration And Air-Conditioning 2021. Tata Mcgraw Hill Educaion, , William C.Whiteman And William M .Johnson Refrigeration And Air-Conditioning And Technology Delmarpublications , Kaplan A Practical Guide To Fibre Science (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Bhorkar Textile Fibre Science(Smp- Nagpur) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , W.S.Murphy Elements Of Fibre Science (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Pattabhiram Essential Calculations Of Practical Cotton Spinning Iiird Edition Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Pattabhiram Spinning Fundamentals Of Manmade Fibres Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Pattabhiram Spinning Processing Methods Of Manmade Fibres Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Shrivastava Spinners- Hand Book Of Quality Control Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Dr.Kathirvelu Subramaniam A Text Book On Yarn Manufacturing Vol-1 Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Dr.Kathirvelu Subramaniam A Text Book On Yarn Manufacturing Vol-2 Shree Samarth Krupa Publishing, Ahmadabad - 380015 , W.S.Murphy A Practical Guide To Spinning (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Talukdar & Guha Weaving- Calculations, Costing, Projects Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Gokarneshan Practical Guide To Fabric Manufacture & Cloth Analysis Laboratories Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Grosicki Watsons Textile Design & Color Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Singh Modern Weaving Calculations – Vol 1 Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Schwartz Fabric Forming Systems Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Arora Modern Weaving Technology (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , W.S.Murphy Textile Weaving & Design (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , W.S.Murphy Textile Weaving & Design (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Gokarneshan Weaving Preparation Technology (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Watson Watson Textile & Clothing (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , W.S.Murphy Textile Finishing (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Smith Textile Processing: Printing, Dyeing Finishing (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Booth Principles Of Textile Testing Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Mahadevan Textile Robotics & Automation (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Rattan Modern Textile Management (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Rattan Modern Textile Technology (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Woodhouse Textile Mathematics (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Venkatesan Indian Textile Policy For The 21St Century Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Vidyasagar Hand Book Of Textiles Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Hall Standard Hand Book Of Textiles Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Krishnakumar Apparel Merchandising (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Gokarneshan Garment Manufacturing Technology (Ap) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Know About Threads- Cotton, Silk And Synthetics - Manufacture & Uses Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Kothari Technical Textiles: Technology, Developments & Applications Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Johnson Introduction To Knitting Technology Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Horace David Buck Flat Machine Knitting & Fabrics Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Madhavamoorthy Nonwovens Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Shoben/ Ward R Pattern Cutting & Making Up: The Professional Approach 1999 Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Amrit Bajaj Embroidery & Stitch Tools Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Anita Tyagi Garment Construction Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Anita Tyagi Textile Fibre & Its Uses Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Cotton: Fibre To Yarn (Spiral Binding) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Functions Of Spinning Machines (Spiral Binding) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Medical Textiles (Spiral Binding) Shree Samarth Krupa Publishing, Ahmadabad - 380015 , Technical Fabrics/Textiles Shree Samarth Krupa Publishing, Ahmadabad - 380015 , B.L. Theraja & A.K. Theraja A Course In Electrical Engineering (Volume-2) By B.L. Theraja & A.K. Therajapublished S. Chand & Company Ltd, New Delhi. , Dr. M. Arumugam & N. Prem Kumar, Electric Circuit Theory By Dr. M. Arumugam & N. Prem Kumar, Khanna Publishersnew Delhi , A. Chakra Barti Circuit Theory By A. Chakra Barti For Electronics & Electrical Engineering Dhanpat Rai & Co , V.K. Mehta & Rohit Mehta Principles Of Electrical Machines By V.K. Mehta & Rohit Mehta Ltd, S. Chand & Company Ltd, New Delhi. , J.P.Gupta, Electrical Technology, 11Th Edition, S.K.Kataria & Sons New Delhi, 2012. , I.J. Nagarath, D.P. Kothari Electrical Machines, 5Th Edition, Tata Mcgraw Hill Education Publications , R.S.Sedha A Text Book Of Applied Electronics ,3Rdedition, S.Chand Publications, , E.Balagurusamy Eprogramming In Ansi C, 8Th Edition, Tata Mcgraw Hill Publications. , Cl Wadhawa Electrical Power System, 6Th Edition, New Age International, New Delhi. , Sony , Gupta & Bhavnagar A Course In Electrical Power Dhanpath Rai & Co (P) Ltd., New Delhi , Ajitpal “Microcontrollers, Principles And Applications”, Phi Publications , M. Yokes, B. S. Nag Raja, N. Nandan Computer Aided Electrical Drawing Phi Learning Pvt. Ltd , Gaur Verna Matt Weber, Auto Cad Electrical Phi Learning Pvt. Ltd, 2024, , K.B. Bhatia Study Of Electrical Appliances & Devices By K.B. Bhatia Khanna Publishers. , Garson J. Wheeler How To Repair Electrical Appliances By Garson J. Wheeler, Barnes & Noble Books. , A.K. Sawhneypuneet Sawhney A Course In Electrical And Electronics Measurements And Instrumentation Dhanpat Rai & Co.,(P) New Delhi. , Petranabis.D Sensors And Transducers Wheeler Publisher , Wadhwa, C.L Generation, Distribution And Utilisation Of Electrical Energy New Academic Science, Newdelhi, 2011 , Sunil S.Rao Switchgear And Protection, Khanna Publishers, New Delhi, 4Th Edition,2010. , Jack Erjavec And Jeff Arias “Hybrid, Electric And Fuel Cell Vehicles”, Cengage Learning, 2012 , Md Singh, K.B. Khanchandani Power Electronics Tata Mc Graw Hill Publishing Company Ltd, New Delhi, Seventh Reprint 2005. , Frank D. Petruzella Programmable Logic Controllers Published By Mcgraw Hill, New Delhi , John R Hackworth And Fredrick D. Hackworth Programmable Logic Controllers – Programming Methods And Applications Published By Pearson Education. , Simon Monk “Programming The Raspberry Pi: Getting Started With Python”, January 2012, Mcgraw Hill Professional. , Jain, Prof. Satish, Singh, Shashi Internet Of Things And Its Applications, 1St Edition, Bpb, 2020. , S.K. Bhattacharya Control Of Electrical Machines New Age International Publishers, New Delhi. , Steve Senty Motor Control Fundamentals Delmar Cengage Learning. , A.K Mittal And K. Mehta Electrical Engineering Theory Latest Edition (1 January 2019). Computech Publications Limited (Asian Publishers); , Konrad Reif Automotive Mechatronics, Automotive Networking • Driving Stability Systems, Springer 2015 Edition, Springer Vieweg , B.S. Grewal Higher Engineering Mathematics, 42Ndedition, Khanna Publishers , Ibrahim Dinçer, Halil S. Hamut And Nader Javani Dinçer, , Thermal Management Of Electric Vehicle Battery Systems, John Wiley& Sons Ltd. , H.J. Bergveld, Wanda S. Kruijt And Peter P.H.L. Notten. Battery Management Systems Design Springer Science Business Media , R S Khandpur. Printed Circuit Boards: Design – Fabrication Hardcover,. Mcgraw Hill Education. , Walter C. Bosshart, Printed Circuit Boards - Design & Technology, First Edition; Tata Mcgraw Hill Publications , M. Buchla David Renewable Energy Systems, Pearson Education Publication. , Mehrdad Ehsani, Yimin Gao, Sebastien E. Gay And Ali Emadi. Modern Electric, Hybrid Electric And Fuel Cell Vehicles: Fundamentals, Theory And Design”,. Crc Press , Book I - General Aspect Of Energy Management And Energy Audit, Second Edition 2005, By Bureau Of Energy Efficiency, Ministry Of Power, India.- , Sonal Desai Handbook Of Energy Audit, Mcgraw Hill Education (India) Private Limited , M.M.Mano Digital Logic & Computer Design Person Education India , Wakerly, John Digital Design Principles & Practices – 5Th Edition Person Education , A.Kumar Fundamentals Of Digital Circuits Practice Hall India , Sarah Hams & David Harris Digital Design & Computer Architecture Arm Editor , George Reere Mysql Pocket Reference.2Ndedition O’ Reillymedia , Vikram Vaswani Mysql : The Computer Reference Mcgraw Hill Education , R.P.Join Modern Digital Electronics Mcgraw Hill Education , Reema Thareja Programming In C.2Nd Edition Oxford University Press , E.Balaguruswamy Programming In Ansic.3Rdedition Tata Mcgraw Hill , Terry Felke - Morris Web Development And Design Foundations With Html5,9Th Edition Pearson , Laura Lemay, Rafe Colburn Mascircuing Html, Css & Java Bpb Publications , Andrew S Taneubaum Script Web Publishing - 1St Edition Modern Operating System Pearson / Ph1 , William Stalling Operating System - Internal & Design Principal.9Thedition Person Education / Phi , Andrew S Taneubaum Computer Networks - 5Thedition Pearson Practice Hall , William Stalling Data & Computer Communication.8Th Edition Pearson Education , Behrouz A Forouzan Data Communication & Networking.4Thedition Tata Mcgraw Hill , Rance D.Necaise Data Structure & Algorithms Using Python John Wiley , Benajamin Baka Python Data Structure & Algorithms Pocket Publishing Ltd. , Robert Tamassia, Michael H.Goldwarser, Michael T.Goodrich Data Structure & Algorithms In Python. Wiley , E.Balaguruswamy Programming With Java.5Th Edition Tata Mcgraw-Hill , Herbert Schildt The Complete Reference Java.7Thedition Tata Mcgraw-Hill , Sagayaraj,Denis, Kartick & Gajalakshmi Java Programming For Core & Advanced Learners, Universities Press (India) Pvt Ltd , Ai Sweegart Automate The Boring Staff With Python , 2Nd Edition No Starch Press. , Jake Vanderplas Python Data Science Handbook : Essential Tool For Working With Data Oreilly Media , Wes Mckinney Python For Data Analysis: Data Wrangling With Panadas, Numpy & C Python. 2Nd Edition Oreilly , Lataeefah Raji Design With Canva : A Complete Guide On How To Use Canva Independent Publisher , Gary David Boulon Corel Draw X7 : The Official Guide. 12Thedition Oreilly Media, , Timotay Boro, Elizabeth Naramore,Jasan Gerner,Michael Kalan Beginning Php6, Apache Mysql, Web Development John Weley & Sons Ltd, , Ashish Bhatnagar, Shaliza Sharma Cloud Computing,1Stedition S.K. Katana & Sons , Rajkumar Buyya,Christianvecchidu.S Thamarai Selvi Mastering Cloud Computing Tata Mcgrew-Hill , Etaem Alpaydin Introduction To Machine Learning.4Th Edition Mit Press , Sebestian Rascwa, Sahid Mirajlili Python Machine Learning,3Rd Edition Packtpublishing , C.S.R Prabhu Data Warehousing Concepts,Techniques, Product & Applications. 3Rdedition Phi Learning , William Stallings, Lawrie Brown Computer Security Principles & Practice.4Th Edition Pearson Education , Patrick Engebreston The Basics Of Hacking & Penetration Testing: Ethical Hacking & Penetration Testing Made Easy - 2Nd Edition. Syngres , Stuart Russel, Peter Norwig Artificial Intelligence, A Modern Approach, 2Nd Edition Practice Hall , Rich,Kevin Knight ,Shiv Shankar,B Nair Artificial Intelligence, 3Rd Edition Tmh , Paherson Introduction To Artificial Intelligence & Export System Pearson India , Rajkamal Internet Of Things Mcgrow Hilleduction , Gopal Chaudhgry Manju Khari,Mohammed Elhoteny Digital Twin Technology Crc Press , D.Balasubramanium Computer Installation Service , 2Ndedition Tata Mcgraw Hill, New Delhi 2020 , Tim Patrick Microsoft Ado.Net 4 Step By Step Practice India Hall , Jacob Lett Bootstrap 4 Quick Bootstrap Creative , Ken William San Learning Angular Js:A Guide To Angular Js Development O Reilly , G.K Varshney ,Shiv Shankar,B Nair Fundamental Of Entrepreneurship Sahitya Bhawanpublications , H.Nandan Fundamental Of Entrepreneurship, 3Rd Edition Practice Hall Of India Pvt Ltd , Jonathan Rodriguez Fundamental Of 5G Mobile Networks. Wiley , Enk Dahlman 5G Nr: The Next Generation Wireless Access Technology. Elsevier , Jennifer Davis Ryn Daniels Effective Devops Oreilly, , Allen Downey Thinks Stats: Exploratory Data Analysis In Python. 2Nd Edition Oreilly , Barrie Sosinsky Cloud Computing Wiley India , Ramakanth A Gayakward Op Amps And Linear Integrated Circuits , Thomas L Fled Digital Fundamentals , Malvino Digital Principles And Applications Mc Gaw Edu , Behrouz A.Forozon Local Area Networks , Andrews Tanentaum Computer Networks , E. Balagurusamy C Programming And Data Structures , Venkatesh. N Baitipuli Introduction To Data Structures Using C , Abraham Silberchatz Operating System Principles , William Stallings Operating System , Andrews Tanenbaum Modern Operating System , Behrouz A Forouzan Data Communication And Networking , William Stallings Data And Computer Communications , George Kennady Bernard Davis Electronic Communication Systems , E .Balagurusamy Programming With Java , Sagayaraj & Dennis Java Programming For Core And Advanced Learners , Ai Sweight Automate The Boring Staff With Python , Jake Venderplas Python Data Science Handbook , Stephen J Bigelow Trouble Shooting, Maintain And Repairing , Mahahar Lotai Modern Computer Hardware , C.Siva Ram Murthy Ad Hoc Wireless Networks Architecture And Protocols , Myron Begman Manufacturing Process.5Thedition Tata Mcgraw Hill Publishing Co Ltd . , Vijay K Jain Advanced Machining Processes Allied Publishers Pvt Ltd, New Delhi , Dr.M.Arumugam & Dr.N.Premkumaran Electric Circuit Theory Khanna Publishers, , Edward Hughes Addision Electrical Technology Wesley International Student Edition , B K Sarkar Strength Of Materials Tata Mcgraw – Hill. , Jagadeesha. T Hydraulics And Pneumatics I.K.International Publishing House , Majumdar.S.R Oil Hydraulic Systems - Principles And Maintenance Tata Mcgraw – Hill , Andrew Parr Hydraulics And Pneumatics: Technicians And Engineers Guide Jaico Publishing House , Georg Pelz Mechatronics Systems: Modelling And Simulation” With Hdl’S, Johnwiley And Sons Ltd. , Bishop, Robert H Mechatronics Hand Book Crc Press , Bradly, D. Dawson, N.C. Burd And A.J. Loader, Mechatronics: Electronics In Products And Processes. Crc Press/ First Indian Pront , De Silva Mechatronics: A Foundation Course Taylor & Francis, India , K. Krishnaswamy Process Control New Age International , Donald P. Eckman Automatic Process Control Wiley Eastern Ltd., Newdelhi , Crouse, W.H Automobile Electrical Equipment. 3Rdedition Tata Mcgraw Hill Publishing Company,New Delhi , A.P. Young And L. Griffith Automotive Electrical Equipment, 11Thedition English Language Book Society & New Press. , P.S. Gill Geometric Dimensioning And Tolerancing S.K. Kataria & Sons , Krishnaswamy. K, And Vijayachitra.S Industrial Instrumentation, 2Ndedition, New Age International Publishers. , Akshat Bansal, Akriti Agarwal Comparison Of Electric And Conventional Vehicles In Indian Market Consumer Preference And Best Segment For Electric Vehicle (Ijsr) , Shaohua Yang, Harold Knickle, Design And Analysis Of Aluminum/Air Battery System For Electric Vehicles Elsevier , John J.Pippenger Tyler, G.Hicks Industrial Hydraulics.3Rdedition. Mc.Graw-Hill Book Company. , James L. Johnson.-Delmar Thomson Introduction To Fluid Power Phi Learning Inc. , Jovitha Jerome Virtual Instrumentation Using Lab View Phi Learning Private Limited, New Delhi, Second Printing, 2011 , Mcewen And H. Cassimally Designing The Internet Of Things Wiley, Isbn-10:111843062X , N. Vengurlekar And P. Bagal Database Cloud Storage: The Essential Guide To Oracle Automatic Storage Management Mcgraw-Hill Education, Isbn-10:0071790152. , R.K. Mittal, I.J. Nagrath, Robotics And Controls Tata Mcgraw Hill Education Pvt. Ltd , Doughlaes - R. Hal Coojr An Introduction To Robotics , Mikkel P. Groover, Mite Chellweiss, Rogern Negal And Nicholes G.Odress Industrial Robotics Technology- Programming And Applications , C.S.Misra Management Of Printing Industry And Factory Act Anupam Prakashan , C.S.Misra Technology Of Post Press Anupam Prakashan , C.S.Misra Objective Questions In Printing Anupam Prakashan , C.S.Misra Introduction To Book Binding Anupam Prakashan , C.S.Misra Printing Technology For Students Anupam Prakashan , C.S.Misra Printing Inks & Papers Anupam Prakashan , Anando Seal A Handbook Of Gravure & Flexographic Printing Anupam Prakashan , B.D.Mendiratta Elements Of Design And Typography Anupam Prakashan , W.R.Durrant Web Control Anupam Prakashan , K.Goswami Offset Printing And Troubleshooting Practical Guide Anupam Prakashan , Venkataraman & Balaraman Estimating Methods & Cost Analysis For Printers Anupam Prakashan , B.D.Mendiratta Technology Of Screen Printing Anupam Prakashan , B.D.Mendiratta Binding And Finishing Processes Anupam Prakashan , Niir Board Screen Printing Technology Anupam Prakashan , Niir Board Modern Printing Technology Anupam Prakashan , Niir Board Handbook On Printing Technology Anupam Prakashan , Niir Board The Complete Book On Printing Technology Anupam Prakashan
Contract Date: Dec 27, 2024 Contract Value : ₹ 1.00 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
32.
Public Administrative Department #5194265 AOC
Stationery And Office Use Items, Computer Peripherals And Printer Cartridge , Stationery & Office Use Items, Computer Peripherals And Printer Cartridge , Stationery & Office Use Items, Computer Peripherals And Printer Cartridge , All Out Machine With Refill , All Pin Superior Quality 100 Gsm , All Pin Superior Quality 65 Gsm , All Pin Superior Quality4 250 Gsm , All Pin Superior Quality400 Gsm , Attendance Register 8 X 13 ( 2Qr) 56 Gsm Paper , Attendance Register 8 X 13 ( 4Qr) 56 Gsm Paper , Audit Pencil Red/Blue , Bastacloth44 X 44 Superior Quality , Basta Cloth 36” X 36” , Bill Ragister 200 Pages , Binder Clip 19 Mm (12 No) , Binder Clip 25 Mm(12 No) , Binder Clip 32 Mm(12 No) , Binder Clip 41 Mm (12 No) , Binder Clip 51 Mm(12 No) , Board Duster , Borosil Glass 150Ml , Box File, Material- Cardboard, Shape- Rectangular, Size – A-4, Document Clamp Type - Spring , Box File, Material- Rexine, Shape- Rectangular, Size – A-4, Document Clamp Type - Spring , Burfi Pad 9.5 Cm X 9.5 Cm , Calculator- 12 Digitmj- 120 D , Calculator 12 Digit Scientific – Fx 91-Es , Calculator 12 Digit Scientific – Fx 91-Ms , Call Bell Standard (Electrical) , Call Bell Standard (Reomte) , Candle(6 No Per Pkt) , Cell Aa , Cell Aaa , Brown Tap 1 Inch 45 Mtr , Brown Tap 2 Inch 45 Mtr , Tap 0.5 Inc , Tap 0.75 Inch , Tap 1 Inch , Tap 1.5 Inch , Tap 2.00 Inch , Chalk Dustless80 Mm , Clip Pad 23X33cms Super Quality Acrylic Sheet 5Mm With Clip. , Clip Pad Hard Board With Sun Mica Steel Clip 21.5 X 30 Cm One Sidesun Mica , Clip Pad Hard Board With Sun Mica Steel Clip 21.5 X 30 Cm Twoside Sun Mica , Cobra Box File, Material- Cardboard, Shape- Rectangular, Size – Foolscap, Document Clamp Type - Spring , Coline 500 Ml , Colour Papera-4 Size80 Gsm , Colour Pencil 12 No , Computerstationery 10X12xi 70 Gsm , Computerstationery 10X12x Ii70 Gsm , Computerstationery 10X12x Iii 70 Gsm , Computerstationery 15X12x I 70 Gsm , Computerstationery 15X12x Ii 70 Gsm , Computerstationery 15X12x Iii70 Gsm , Correction Fluid & Dilterwhite 15 Ml Camel/Kores/Similar Brand , Cup Saucer Set , Dak Book 8X 13 2 Qr 56 Gsm Paper , Dak Book 8X 13 3 Qr 56 Gsm Paper , Dak Pad Four Fold Ragin , Dak Pad Ordinary Quality , Document Folder Rexine Cover With Chain , Drawing Board Clip Set (Plastic) , Drawing Board Clip Set (Steel) , Drawing Pencil – H , Drawing Pencil –2 H , Drawing Pencil –3H , Drawing Pencil –Hb , Drawing Sheet- (Sunshine) 55X77 Cm (Smooth & Superior Quality)31.1Kg , Drawing Sheet- (Sunshine) 56X76 Cm (Smooth & Superior Quality)31.1Kg , Drawing Sheet- (Sunshine) 77X57 Cm (Smooth & Superior Quality)31.1 Kg , Dumper , Dustercloth 16 X 16 , Duster Cloth Yellow , Electronic Kettle Fiber Body (1 Litre) , Engineering Drawing Board –16”X 23” X15/12 Mm Half Imperial Size, Single Sheet Ebony Edged. , Engineering Drawing Board –16”X 23”X 15/12 Mm Half Imperial Size, With Four Joints Seasonedsoftwood/ Pine Wood Ebony Edged. , Engineering Drawing Board –23”X 32” X15/12 Mm Full Imperial Size, Single Sheet Ebony Edged , Engineering Drawing Board –23”X 32X 15/12 Mm Full Imperial Size,Imperial Size, With Four Joints Seasonedsoftwood/ Pine Wood Ebony Edged. , Envelop Size: 22.5 X 10 Cm Made Of Craft Paper 70 Gsm , Envelop Size: 25.4 X 30.5 Cm Made Of Craft Paper 70 Gsm , Envelop Size: 27.5 X 12.5 Cm Made Of Craft Paper 70 Gsm , Envelop Size: 30.5 X 40.7Cm Made Of Craft Paper 70 Gsm , Envelop, Size 22.5. X 10 Cm Made Ofmap Litho Paper 70 Gsm , Envelop, Size 27.5. X 12.5 Cm Made Ofmap Litho Paper 70 Gsm , Eraser Palasto/Natraj/Camel/Similar Brand , Eraser Small Natraj/Camel/Similar Brand , Eraser: Big Non Dust Non Dust , Eraser: Small Non Dust Size 40X20x12 Mm Non Dust , Fevi Stic Big 8 Gm , Fevi Stic Small 15 Gm , Fevicol 100 Gm , Fevicol 22.5 Gm , Fevicol 42 Gm , File Bag With Wheel , File Board Printed College Mono 36 X 25 Cm With Clip , File Cover Cobra (Spring File) Surpur Sheet 31.5 Kg , File Cover Variety No.2A Good Quality Metalclip To Hold Papers , File Cover Variety No.3 Laminated From Inside , File Cover, 3 Wide Binding Cloth In The Centre. , File Pad 32 Ozs Straw/Yellow/ Board Pasted With Brown Paper 10X14 Cloth Flap With Corner Size 60Cmx7cm With 36Long Braided Cotton Tape.Each , File Pad 48 Ozs Straw/Yellow/ Board Pasted With Brown Paper 10X14 Cloth Flap With Corner Size 60Cmx7cm With 36Long Braided Cotton Tape.Each , File Tray Plastic , Geometrical Box , Glossy Paper A-4 Size , Glue Stick 15 Gm , Glue Stick 8 Gm , Graph Paper (Centimeter)-Pad At 96 Sheet Having Centimeter Block, Dimension At 22Cmx27cm, Graph Paper Should Be At Bright (Galaxy) Green/Red Color At Good Quality Glazed Paper With Per Feet Pad. , Gum (Pest) 150 Gm , Gum (Pest) 300 Gm , Gum (Pest) 700 Gm , High Board Spring File Superior Quality , High Lighter Pen Set (5 Pen) Luxer/Similar Brand , High Lighter Pen Single Pen Luxer/Similar Brand , Hit Sprey , Instrument Box Nickel Chrome Polish Set Of 13No. Instrument Body Plastic Superior Quality , Instrument Box Simple Polish Set Of 13No. Instrument Body Plastic Superior Quality , Inward/Despatch Register 8X13 (4 Qr) 56 Gsm Paper , Inward/Despatch Register 8X13 (6 Qr) 56 Gsm Paper , Inward/Despatch Register 8X13 (8 Qr) 56 Gsm Paper , Inward/Despatch Register 8X13 10 Qr) 56 Gsm Paper , Inward/Despatch Register 8X13 12 Qr) 56 Gsm Paper , Lace Green Iron Clip 18 (100 No Per Bunch) , Lace Green Iron Clip 24 (100 No Per Bunch) , Lace White Iron Clip 18 (100 No Per Bunch) , Lace White Iron Clip 24 (100 No Per Bunch) , Lamination Envelope 11X5 , Lamination Envelope 12X16 , Lamination Envelope 9X4 , Lamination Envelope File Size 10X12 , Lamination Envelope Yellow 6X3.5 , Legal Paper Green A-4 Size 500 Sheet80 Gsm , Legal Paper Green F-S Size 500 Sheet 80 Gsm , Log Book 15 X 19.5 Cm 144 Page56 Gsm , Log Book 15 X 19.5 Cm 192 Page56 Gsm , Long Copy – (Printed Mono) (Ruled)Page 92 With Cover Size 17X27 Cm, Good Quality Paper 56 Gsm Thick Cover With Printed Name Of Institution. , Long Copy –(Printed Mono ) Page 200 With Cover Size 17X27cm,Good Quality Paper 56Gsm Thick Cover With Printed Name Of Institution. , Long Copy –(Printed Mono ) Page 240 With Cover Size 17X27cm,Good Quality Paper 56Gsm Thick Cover With Printed Name Of Institution. , Long Copy –(Printed Mono) Ruled)Page 96 With Cover Size17x27cm,Good Quality Paper 58Gsm Thick Cover With Printed Name Of Institution. , Measuring Tape Tailoring , Meeting Stand A-4 Size Acrylic Sheet , Mini Drafter Folding-With P.V.C Cover Steel Rod Unbreakable 23X32 Superior Quality. , Mini Drafter Simple -With Pvc Cover Steel Rod 23X32 Superior Quality. , Napkin Super Quality , Note Sheet Pad 8.5X 13.5 Green Ledger Paper (100 Sheets) 75Gsm , Note Sheet Pad 8X 13 Green Ledger Paper (100 Sheets) 56 Gsm , Odonil , Office File Flate Patti 16 Oz , Office File Flate Patti 24 Oz , Office File Flate Patti 32 Oz , Omage Rack Plastic , Painting Brush Set 0 To 9 No , Palstic Bucket 16 Ltr (Cello) , Paper Cutter – Size 0.5 Blade , Paper Cutter – Size 1Blade , Paper P Cutterplastichandle Big , Paper Weight Glass Best Quality , Paper Weight Glass Superior Quality , Pen Addgel/Similar Brand , Pen Butterflow , Pen Holder Jotter , Pen Jel , Pen Jotter , Pen Ordinary , Pen Stand Plastic Four Socket With Four Pen , Pen Stand Plastic Four Socket Withoutpen , Pen Stand Plastic Small , Pen Stand Plastic Two Socket With Two Pen , Pen Stand Plastic Two Socket Without Pen , Pen Trimax , Pencil Apsara/Similar Brand , Pencil Cell Everreddy/Similar Brand , Pencil Hb/Natraj/Similar Brand , Permanent Marker Pen Natraj/ Camel/Similar Brand , Photo Copier Paper 75 Gsm 500 Sheets Size 210X297 Mm [A4] J.K.Red/Xerox / Similar Brand , Photo Copier Paper 75 Gsm 500 Sheets Size 215X345 Mm [Fs] J.K.Red/Xerox / Similar Brand , Photo Copier Paper 75 Gsm 500 Sheets Size 297X420mm [A3] J.K.Red/Xerox / Similar Brand , Pilot Luxer Hi Tech Pen , Pin Cushion Plastic Magnetic , Pin Cushion Plastic Superiorquality , Pin Opener , Plane Drawing Book-20 Page , Plastic Button Folder Single Pocket , Plastic Button Folder With One Pocket , Plastic File Cover , Plastic File Cover Clip , Plastic Folder L Type , Plastic Leaf A-4 Size , Plastic Mug Cello / Similar Brand , Plastic Name Plate , Plastic Scale- Omega /Camel/ Similar Brand Transparent Plastic Scale Length Mm 30 Cm, Width 40 Rounded Corners With Smooth Tapered Edge That Lie On Flat Surface. , Plastic T Scale Length 36 , Plastik Dustbin (Cello / Similar Brand) 20 Ltr , Plate Big Bone China Gold Line 6 No. , Plotter Paper Roll 914 Mm X 100 Mtr90 Gsm , Plotter Paper Roll 914 Mm X 40 Mtr120 Gsm , Poker ( Tocha) Plastic , Poker ( Tocha) Steel , Poker ( Tocha) Wooden , Postit 1.5 X 2 Inch , Postit 2 X 3 Inch , Postit 3 X 3 Inch , Postit 4 X 3 Inch , Postit 5 X 3 Inch , Postit 6 X 5 Inch , Practical Register-100 Page Size 9.5”X7.5” Pest Winding Me Litho Paper Black Rolling One Size Plane One Side Ruled Laminated Cover With Certificate And Index. , Practical Register-200 Page Size 9.5”X7.5” Pest Winding Me Litho Paper Black Rolling One Size Plane One Side Ruled Laminated Cover With Certificate And Index , Practical Register-80 Page Size 8.5 X 11” Pest Winding Maple The Paper Black Rolling One Size Plane One Side Ruled Laminated Cover With Certificate And Index. , Practical Register-96 Page Size 8.5 X 11” Pest Winding Maple The Paper Black Rolling One Size Plane One Side Ruled Laminated Cover With Certificate And Index. , Punching Machine 52 No , Punching Machine 600 No , Punching Machine Big 800 No. , Punching Machine Single Punch , Quarter Plate Full Size Bone China Gold Line , Quarter Plate Half Size Bone China Gold Line , Refill Add Gel Achiever , Refill Jotter , Reynolds Pen 045 , Ring Binder File A-4 Size , Room Freshner Od / Godrej/ Premier / Similar Brand , Rope Plastic 250 Gm , Rotering Ink , Ruled Register , 1 Quire Full Cloth Binding ,Size8 X 13 , Ruled Register , 12 Quire Full Cloth Binding ,Size8 X 13 , Ruled Register , 2 Quire Full Cloth Binding ,Size8 X 13 , Ruled Register , 3 Quire Full Cloth Binding,Size8 X 13 , Ruled Register , 4 Quire Full Cloth Binding ,Size8 X 13 , Ruled Register , 6 Quire Full Cloth Binding ,Size8 X 13 , Ruled Register , 8 Quire Full Cloth Binding ,Size8 X 13 , Ruled Register Eightquire Size 32.5X20 Cm (576 Pages 58 Gsm) , Ruled Register Eightsize 28 X 17 Cm (768Pages 58 Gsm) , Ruled Register Fourquire (384 Pages 58 Gsm) Size 28 X 17 Cm , Ruled Register Fourquire (384 Pages 58 Gsm) Size 32.5 X 20 Cm , Ruled Register One Quire (96 Pages 58 Gsm) Size 28 X 17 Cm , Ruled Register One Quire (96 Pages 58 Gsm) Size 32.5X 20 Cm , Ruled Register Sixquire (576 Pages 58 Gsm) Size 28 X 17 Cm , Ruled Register Sixquire (576 Pages 58 Gsm) Size 32.5X20 Cm , Ruled Register Ten Quire Size 32.5X20 Cm (576 Pages 58 Gsm) , Ruled Register Twelve Quire Size 32.5X20 Cm (576 Pages 58 Gsm) , Ruled Register Two Quire(192Peges 58 Gsm) Size 28 X 17 Cm , Ruled Register Two Quire(192Peges 58 Gsm) Size 32.5 X 20Cm , Rulled Paper(Statement) 13X16(480Sheets) 56 Gsm , Rulled Paper(Statement) 16X26(480Sheets) 56 Gsm , Scale Plastic 12 Long & 1 Width , Scale Plastic 24 Long & 1 Width , Scale Steel 12 Long & 1 Width , Scale Steel 24 Long & 1 Width , Scissor Large Size Brasso / Similar Brand , Scissors 7 Inch Steel ( Plastic Handle) , Scissors 9 Inch Steel ( Plastic Handle) , Seasonal Pads Printed College Mono 100 Pgs 36 X 25 Cm , Seasonal Pads Printed College Mono 50 Pgs 36 X 25 Cm , Set Square (260X 300 Cm) , Sharpener Plastic Super Quality , Short Hand Note Book 200 Pages 52 Csm Size Standard , Short Hand Pencil Apsara / Similar Brand , Sketch Pen Set ( 12 Pen) Camel/ Luxure / Similar Brand , Slip Pad 10 Sheet , Slip Pad 7 X 11.5 ( 80 Sheet) , Slip Pad 7 X 11.5 (40 Sheet) , Slip Pad 8 X 11.5 ( 40 Sheet) , Slip Pad 8 X 11.5 ( 80 Sheet) , Spiral Slip Pad 30 No , Spiral Slip Pad 44 No , Stamp Pad95 X 52Ml , Stamp Pad110 X 70 Mm , Stamp Pad Ink 100 Ml , Stamp Pad Ink 60 Ml , Stamp Pad Kores/ Similar Brand 160 X 97 Mm , Stapler Machine10 No Kangaro , Stapler Machine24 No Kangaro , Stapler Machine Hd 1217 , Stapler Machine Playar Type 10 No , Stapler Machine Playar Type 24 No , Stapler Pin 10 No Max ( Per Pkt) , Stapler Pin 23/17 ( Per Pkt) , Stapler Pin 24 No Max ( Per Pkt) , Steel Spoon Superior , Stirip File A4 Trnsprient , Stock Ledger 8 X13 (10 Qr) 70 Gsm Paper , Stock Ledger 8 X13 (12 Qr) 70 Gsm Paper , Stock Ledger 8 X13 (4 Qr) 70 Gsm Paper , Stock Ledger 8 X13 (6 Qr) 70 Gsm Paper , Stock Ledger 8 X13 (8 Qr) 70 Gsm Paper , Strip Filea-4 Size , Strip File Fs Size , Table Bell , Table Glass 5 Mm (Per Sq Ft) , Table Glass 6 Mm (Per Sq Ft) , Table Top Acrylic Sheet , Tag Cotton 8 ( 50 No Per Bunch) , Tag Cotton 8 (100 No Per Bunch) , Tag Cotton 8 (50 No Per Bunch) , Tape Dispenser (Big) , Tape Dispenser (Small) , Tea Coaster Set Of 6 Nos. , Tea Cups Set Of 6 Nos , Tea Flask 1000 Ml , Tea Flask 600 Ml , Thermos Flask Steel Body 1000 Ml , Thermos Flask Steel Body 750 Ml , Torch Cell Everreddy / Similar Brand , Towel (White/Diff.Colours) Full Size (60 X 120 Cm) , Towel (White/Diff.Colours) Full Size (75 X 150 Cm) , T-Pins 80 Gm , Trey Big Size Cello / Similar Brand , Trey Medium Size Superior , U Pin Pkt Plastic 26 Mm (50 Pin) , U Pin Pkt Plastic 28 Mm (50 Pin) (100) , U Pin Steel 26 Mm (50 Pins) 30 Mm , U Pin Steel 28 Mm (50 Pins) , Umbrella Big 12 Taan , Umbrella Medium 12 Taan Folding , Uniball Pen , Waist Paper Basket (Plastik Dustbin) Midium Non Padstel 10Ltr Capacity , Waist Paper Basket (Plastik Dustbin) Midium Padstel 10Ltr Capacity , Water Glass ( Yera / Similar Brand) , Water Jug Glass , Water Jug Pvc , White Board Marker Pen Natraj/ Camel / Similar Brand , White Board Per Sq Fit , White Fluid Pen Camel / Similar Brand , White Paper 56 Gsm 43 X 32 Cm (480 Sheet) , Window Envelop Size 22.5 X 10 Cm Made Of Map Litho Paper 70 Gsm , Window Envelop Size 27.5 X 12.5 Cm Made Of Map Litho Paper 70 Gsm , 1U Wall Mountingrack-1U/100 , Comes With Front Door, Lockable Toughened/ Clear Glass With Lock & Key Brand - Cp Plus /Dlink/ Netrack/ Similar Brand , 2U Wall Mountingrack-2U/200 , Comes With Front Door, Lockable Toughened/ Clear Glass With Lock & Key Brand - Cp Plus /Dlink/ Netrack/ Similar Brand , 3U Wall Mountingrack-3U/300 , Comes With Front Door, Lockable Toughened/ Clear Glass With Lock & Key Brand - Cp Plus /Dlink/ Netrack/ Similar Brand , 4U Wall Mountingrack-4U/400 , Comes With Front Door, Lockable Toughened/ Clear Glass With Lock & Key Brand - Cp Plus /Dlink/ Netrack/ Similar Brand , 6U Wall Mountingrack-6U/600 , Comes With Front Door, Lockable Toughened/ Clear Glass With Lock & Key Brand - Cp Plus /Dlink/ Netrack/ Similar Brand , Ahd Bullet Camera 2 Mp - 1/2.5 2Mp Sony Sensor, Lens 3.6Mm, 20Mtswith 24 Ir Led, Built-In Ir Cut Filter, Accurate Focus For Day & Night, 3Dnr,Ip66. Brand -Avik/Cp Plus /Godrej/ Smilar Brand , Antivirus 1 Userwith Validity 03 Years Brand Quick Heal Internet Security , Antivirus 1 Userwith Validity 03 Years Brand Quick Heal Pro , Antivirus 1 User With Validity01 Year Brand Net Protector , Antivirus 1 User With Validity01 Year Brand Quick Heal Internet Security , Antivirus 1 User With Validity01 Year Brand Quick Heal Pro , Antivirus 1 User With Validity01 Year Brand Quick Heal Total Security , Antivirus 1 User With Validity03 Years Brand Quick Heal Total Security , Bnc Connector , Superior Quality , C.D. 700 Mb Brand -Frontech/ Hp/ Smilar Brand , Cat 6 Cable 100 Mtrbrand- Dlink /Frontech / Enter/Anker / Similar Brand , Cat 6 Cable 305 Mtr Brand- Dlink /Frontech / Enter/Anker / Similar Brand , Computer Cabinetbrand Zebronics/Evm / Intex /Montech / Similar Brand , Converter For Vga To Hdmi Superior Quality , Cpu Fan Brand Evm/ Intel / Jeonix// Similar Brand , C-Type Pendrive 128 Gb2.0 Brand - Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 128 Gb3.0/3.2 Brand - Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 16 Gb2.0 Brand -- Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 16 Gb3.0/3.2 Brand -- Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 32 Gb2.0 Brand - Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 32 Gb3.0/3.2 Brand - Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 64 Gb2.0 Brand - Hp/ Kingston/ Sandisk / Similar Brand , C-Type Pendrive 64 Gb3.0/3.2 Brand- Hp/ Kingston/ Sandisk / Similar Brand , D.V.D.4 Gb Brand -Frontech / Hp /Similar Brand , D.V.D.8 Gb Brand-Frontech / Hp /Similar Brand , Ddr-4 Ram - 16Gbbrand - Crucial/Corsair/Samsung /Similar Brand , Ddr-4 Ram - 4Gb Brand- Crucial/Corsair/Samsung /Similar Brand , Ddr-4 Ram - 8Gbbrand - Crucial/Corsair/Samsung /Similar Brand , Ddr-5 Ram - 16Gbbrand - Crucial/Corsair/Samsung /Similar Brand , Ddr-5 Ram - 4Gb Brand - Crucial/Corsair/Samsung /Similar Brand , Ddr-5 Ram - 8Gb Brand - Crucial/Corsair/Samsung /Similar Brand , Dnc Connector , Superior Quality , Dvr 16 Channel - H.264 Dual Streamin Video Compression, 16Ch 720P Real Time Recording, 6 Ch Audio Input, Support P2p Cloud Service, Supports Vga & Hdmi Simultaneous Output, Storage 2 Sata Hdd. Brand- Avik/ Cp Plus/ Godrej/ Similar Brand , Dvr 8 Channel - H.264 Dual Streamin Video Compression, 8Ch 1080P Real Time Recording, 4Ch Audio Input, Support P2p Cloud Service, Supports Vga & Hdmi Simultaneous Output, Storage 1 Sata Hdd.Brand- Avik/ Cp Plus/ Godrej/ Similar Brand , External Hard Disk 1 Tb Brand- Seagate / Tishiba/ Wd/ Similar Brand , External Hard Disk 2 Tb Brand - Seagate / Tishiba/ Wd/ Similar Brand , External Hard Disk 4 Tb Brand- Seagate / Tishiba/ Wd/ Similar Brand , Graphic Card 1 Gb Brand- Asus/ Colour Full/ Zotex/ Similar Brand , Graphic Card 2 Gbbrand- Asus/ Colour Full/ Zotex/ Similar Brand , Graphic Card 4 Gb Brand- Asus/ Colour Full/ Zotex/ Similar Brand , Graphic Card 8 Gb Brand- Asus/ Colour Full/ Zotex/ Similar Brand , Hdmi Cable (1.5 Mtr) Brand- Terabyte/ Similar Brand , Hdmi Cable (10 Mtr) Brand- Terabyte/ Similar Brand , Hdmi Cable (15 Mtr) Brand- Terabyte/ Similar Brand , Hdmi Cable (20 Mtr) Brand- Terabyte/ Similar Brand , Hdmi Cable (3 Mtr)Brand- Terabyte/ Similar Brand , Hdmi Cable (5 Mtr) Brand- Terabyte / Similar Brand , Hdmi Splitter 1 To 4 , Superior Quality , Hdmi Switcher 1 To 4 , Superior Quality , Internal Hard Disk 1 Tb Brand- Geonix / Seagate / Toshiba/ Wd / Similar Brand , Internal Hard Disk 2 Tb Brand- Geonix / Seagate / Toshiba/ Wd / Similar Brand , Internal Hard Disk 4 Tb Brand- Geonix / Seagate / Toshiba/ Wd / Similar Brand , Internal Hard Disk 8 Tb Brand- Geonix / Seagate / Toshiba/ Wd / Similar Brand , Internal Hard Disk For Laptop 1 Tb 2.5 Brand- Seagate/ Toshiba / Wd/ Similar Brand , Internal Hard Disk For Laptop 2 Tb 2.5 Brand- Seagate/ Toshiba / Wd/ Similar Brand , Internal Hard Disk For Laptop 4 Tb 2.5 Brand- Seagate/ Toshiba / Wd/ Similar Brand , Internal Hard Disk For Laptop 8 Tb 2.5 Brand- Seagate/ Toshiba / Wd/ Similar Brand , Ip Bullet Camera 2 Mp - 1/2.8 Progessive Scan Cmos, Lens 2.8/4 Mm, 30Mts Ir Range,Wdr, Day/Night (Icr), 3Dnr,Awb, Agc, Blc, H.265/H.264/Mjpeg, Dc12v&Poe,Ip67. Brand - Avik / Cp Plus / Godrej / Similar Brand , Ip Bullet Camera 4 Mp - Image Sensor 1/2.7 Progressive Scan Cmos, Effective Pixels - 4Mp (2560 X 1440), Shutter Speed 1 S To 1/100,000 S, S/N Ratio 40-60 Db, Focal Length 2.7 - 13.5 Mm @ F1.4, Manual Varifocal Zoom Lens, Iris Type Moving/Fixed Iris, V, Day & Nightir Cut Filter With Auto Switch, Ir Distance Up To 50M, Ip67. Brand- Avik / Cp Plus / Godrej / Similar Brand , Ip Dome Camera 2 Mp - 1/2.8 Progressive Scan Cmos, Lens 2.8Mm, 4Mm,6Mm,Ir Range Of 40M, Wdr, Day/Night (Ir) 3Dnr, Awb,Agc,Blc, H.265/H.264/Mjpeg, Dc12v & Poe,Ip67. Brand - Avik / Cp Plus / Godrej / Similar Brand , Ip Dome Camera 4 Mp - 1/2.7Progressive Scan Cmos, 4Mp (2560 X 1440), Min. Illumination Colr:0.002 Lux, 0Lux With Ir, Shutter Speed 1 S To 1/100,000 S,Focal Length 2.7 - 13.5 Mm @ F1.4,Ir Distance Up To 50M, Ingress Protection Ip66. Brand - Avik / Cp Plus / Godrej / Similar Brand , Ip Ptz Camera (Pan, Tilt, Zoom) 2 Mp - Image Sensor 1/2.8 Progressive Scan Cmos Or Better,H.265, H.264, Min. Triple Compressed Stream, Audio Input/Output 1 Ch, Password Protection, Ip Address Filtering,Physical Layer -1Rj 45 10 M/100 M Self Adaptive Ethernet Port, Protoco; Minimum Ipv4/Ipv6, Http, Https, 802.1X, Qos, , Standard Onvif Profiles S,G,T Complaint, Ingress Protection Ip67 Brand - Avik / Cp Plus / Godrej / Similar Brand , Key-Board Usb Brand Dell/ Evm/ Frontech/ Hp/ Logitech/ Similar Brand , Led Monitor 18.5 Brand- Asus/ Foxin/ Lg/ Samsung/ Similar Brand , Led Monitor 21.5 Brand -Asus/ Foxin/ Lg/ Samsung/ Similar Brand , Led Monitor 23.5 Brand- Asus/ Foxin/ Lg/ Samsung/ Similar Brand , Led Monitor 27 Brand- Asus/ Foxin/ Lg/ Samsung/ Similar Brand , Micro Usb To Usb Converter , Superior Quality , Microsoft Office Professional 2021 Software , Microsoft Windows 10 Pro Software , Microsoft Windows 11 Prosoftware , Mother Board- H610m Brand- Asus/ Gigabyte/ Msi/ Similar Brand , Mouse Pad Superior Quality , Mouse Usbbrand -Dell/ Evm/ Frontech/ Hp/ Logiteh/ Similar Brand , Mouse Wireless Brand- Dell/ Evm/ Frontech/ Hp/ Logiteh/ Similar Brand , Nvr 16 Channel - H.264Video Compression Format, 16Ch 1080Precording, Support Onvif, Play Back Mode- Normal/Fast Forward/Rewind/Frame By Frame, Storage 2 Sata Hdd.Brand- Avik/ Cp Plus/ Godrej/ Similar Brand , Nvr 8 Channel - H.264Video Compression Format, 8Ch 1080Precording, Support Onvif, Play Back Mode- Normal/Fast Forward/Rewind/Frame By Frame, Storage 1 Sata Hdd. Brand- Avik/ Cp Plus/ Godrej/ Similar Brand , Offline Ups 1 Kva 40 Minutes Backup Brand- Luminous / Microtek/ Zebian/ Similar Brand , Offline Ups 700 Va 20 Minutes Backup Brand Luminous / Microtek/ Zebian/ Similar Brand , Otg Pen Drive 128 Gb Brand- Hp/ Kingston / Sandisk/ Similar Brand , Otg Pen Drive 16 Gb Brand- Hp/ Kingston / Sandisk/ Similar Brand , Otg Pen Drive 32 Gb Brand- Hp/ Kingston / Sandisk/ Similar Brand , Otg Pen Drive 64 Gb Brand-Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 128 Gbusb 2.0 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 128 Gbusb 3.0/3.2 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 16 Gbusb 2.0 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 16 Gbusb 3.0/3.2 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 32 Gbusb 2.0 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 32 Gbusb 3.0/3.2 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 64 Gbusb 2.0 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Pendrive 64 Gbusb 3.0/3.2 Brand - Hp/ Kingston / Sandisk/ Similar Brand , Poe Switch 16 Portswitch 10/100 Mbps Brand- Dlink / Tenda/ Similar Brand , Poe Switch 16 Port Gigabit 1000Mbps Brand-Dlink / Tenda/ Similar Brand , Poe Switch 24 Portswitch 10/100 Mbps Brand-Dlink / Tenda/ Similar Brand , Poe Switch 24 Port Gigabit 1000Mbps Brand-Dlink / Tenda/ Similar Brand , Poe Switch 5 Portswitch 10/100 Mbps Brand-Dlink / Tenda/ Similar Brand , Poe Switch 5 Port Gigabit 1000Mbps Brand-Dlink / Tenda/ Similar Brand , Poe Switch 8 Portswitch 10/100 Mbpsbrand-Dlink / Tenda/ Similar Brand , Poe Switch 8 Port Gigabit 1000Mbps Brand-Dlink / Tenda/ Similar Brand , Power Supply 450 W Brand- Frontech / Intex/ Zebion/ Zebronics/ Similar Brand , Power Supply 800 W Brand-Frontech / Intex/ Zebion/ Zebronics/ Similar Brand , Processor I3 Gen 11Th Brand Intel/ Similar Brand , Processor I3 Gen 12Th Brand Intel/ Similar Brand , Processor I3 Gen 13Th Brand Intel/ Similar Brand , Processor I5 Gen 11Th Brand Intel/ Similar Brand , Processor I5 Gen 12Th Brand Intel/ Similar Brand , Processor I5 Gen 13Th Brand Intel/ Similar Brand , Processor I7 Gen 11Th Brand Intel/ Similar Brand , Processor I7 Gen 12Th Brand Intel/ Similar Brand , Processor I7 Gen 13Th Brand Intel / Similar Brand , Processor Ryzen 3 Brand Amd / Similar Brand , Processor Ryzen 5 Brand Amd / Similar Brand , Processor Ryzen 7 Brand Amd/ Similar Brand , Rj-45 Connector Brand - Dlink/ Similar Brand , Speaker Set 03 Watts Brand Zebronics/ Similar Brand , Ssd- M.2 1 Tbbrand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd- M.2 256 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd- M.2 512 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Nvme 1 Tb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Nvme 256 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Nvme 512 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Sata1 Tb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Sata 128 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Sata 256 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Ssd-Sata 512 Gb Brand - Hp/ Powermax / Seagate / Wd / Similar Brand , Usb Hub 4 Port 2.0 Brand -Frontech / Lapcare / Terabyte/ Similar Brand , Usb Hub 8 Port 2.0 Brand -Frontech / Lapcare / Terabyte/ Similar Brand , Vgacable (10 Mtr) Brand- Terabyte/ Similar Brand , Vgacable (20 Mtr) Brand- Terabyte/ Similar Brand , Vgacable (5 Mtr) Brand- Terabyte/ Similar Brand , Vga Cable (1.5 Mtr) Brand- Terabyte/ Similar Brand , Vga Cable (15 Mtr) Brand- Terabyte/ Similar Brand , Vga Cable (3 Mtr) Brand- Terabyte/ Similar Brand , Web Cam Hd For Computer Brand -Frontech / Hp / Lapcare / Logitech/ Similar Brand , Wired Key-Board Mouse Bundle Brand- Dell / Evm / Frontech / Hp / Logitech/ Similar Brand , Wireless Key-Board Mouse Bundle Brand-Dell / Evm / Frontech / Hp / Logitech/ Similar Brand , Drum Brother Printer Mfc-L2701dcartridge (Tn2365) , Drum Canon Ir 2002N. Ir 2006N (Npg59) , Drum Canon Laserjet Mfp 264Dw (051) , Drum Hpmfp 132 (19A) , Drum Hp Laserjet M203dn. M227d (32A) , Drum Hp Laserjet Mfp 134Fn (34A) , Drum Unit Canon Ir2525n , Lipi Line Matrix T6303 Ribbon Cartridge , Printer Laser Jet M1005mfp All In One ( Print Scane Photocoper ) , Toner Cartridge Brother Printer Mfc-L2701dcartridge (Tn2365) , Toner Cartridge Canon 333 , Toner Cartridge Canon Colour Laserjet Lbp613cdw(045A) Black , Toner Cartridge Canon Colour Laserjet Lbp613cdwcyan / Megenta / Yellow , Toner Cartridge Canon Ir 2002N. Ir 2006N (Npg59) , Toner Cartridge Canon Ir2525n (Npg51) , Toner Cartridge Canon Laserjet Crgo47 (Lbp0912) , Toner Cartridge Canon Laserjet Heavyduty 6780 (324) , Toner Cartridge Canon Laserjet Lbp 6018 (Lbp925) , Toner Cartridge Canon Laserjet Lbp 6230Dn (326) , Toner Cartridge Canon Laserjet Mfp 226Dn (337) , Toner Cartridge Canon Laserjet Mfp 4750 (328) , Toner Cartridge Canon Mfp 264Dw (051) , Toner Cartridge Deskjet Hp Colour Printer 3776 (680) Black , Toner Cartridge Deskjet Hp Colour Printer 3776 Cyan / Megenta / Yellow , Toner Cartridge Epson Ecotank L6190 Colour Printer Inkjet Black , Toner Cartridge Epson Ecotank L6190 Colour Printer Inkjet Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Laserjet Pro M254dw (202A) Black , Toner Cartridge Hp Colour Laserjet Pro M254dw Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Mfp M377dwcyan / Megenta / Yellow , Toner Cartridge Hp Colour Mfp M377dw (410A) Black , Toner Cartridge Hp Colour Printer 1025 (126A) Black , Toner Cartridge Hp Colour Printer 1025 Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Printer 1215 (125A) Black , Toner Cartridge Hp Colour Printer 1215 Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Printer 3600Dn (502A) Black , Toner Cartridge Hp Colour Printer 3600Dn Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Printer Mfp E77830z Black , Toner Cartridge Hp Colour Printer Mfp E77830z Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Printer Mfp M176, M177 (13A) Black , Toner Cartridge Hp Colour Printer Mfp M176, M177 Cyan / Megenta / Yellow , Toner Cartridge Hp Colour Printer Pro M254 (Cf540a) Black , Toner Cartridge Hp Colour Printer Pro M254 Cyan / Megenta / Yellow , Toner Cartridge Hp Laserjet 1010 To 1022 (12A) , Toner Cartridge Hp Laserjet 1150 (24A) , Toner Cartridge Hp Laserjet 1160, 1320, 1390 (49) , Toner Cartridge Hp Laserjet 1560, 1606 (78A) , Toner Cartridge Hp Laserjet 2100, 2200 (96A) , Toner Cartridge Hp Laserjet 4240 To 4250 (42A) , Toner Cartridge Hp Laserjet 5200 (16A) , Toner Cartridge Hp Laserjet M203dn. M227d (30A) , Toner Cartridge Hp Laserjet M2727nf (53A) , Toner Cartridge Hp Laserjet M427a (28A) , Toner Cartridge Hp Laserjet Mfp 134Fn (33A) , Toner Cartridge Hp Laserjet Mfp 329Dn (77A) , Toner Cartridge Hp Laserjet Mfp400, 401D (80A) , Toner Cartridge Hp Laserjet P2055d (05 A) , Toner Cartridge Hp Laserjet Pro M202dw (88A) , Toner Cartridge Hp Mfp 132 (18A) , Toner Cartridge Panasonic Colour Mfp6020 Black , Toner Cartridge Panasonic Colour Mfp6020 Cyan / Megenta / Yellow , Toner Cartridge Samsung Laser Printer 1053 , Toner Cartridge Samsung Laser Printer 1710D3 , Toner Cartridge Samsung Laser Printer 2571N , Toner Cartridge Samsung Laser Printer 4521 , Toner Cartridge Samsung Mfp Printer Scx 4824Fn (409) , Toner Cartridge Samsung Mfp4824 (209S) , Toner Cartridge Samsung Printer 3310 (205) , Tvs Msp 430 Ribbon Cartridge
Contract Date: Oct 16, 2024 Contract Value : ₹ 1
Government Departments No of Bidders 4
Madhya Pradesh View Result →
33.
Health and Family Welfare #5187587 AOC
Tender For Supply Of Stationary And Other Office Equipment For Cmho Khargone Financial Year 2023-24; 1 Ruling Paper Full Size 17X27 Orient 2 Plain Paper Flowers Size 17X27 Orient 3 A-4 Power Pepper Packets 75 Grams 4 A-4 Pepper Packet 70 Grams Local 5 A-4 Power Pepper Packets 70 Grams 6 A-4 Ledger Paper Packets Super 70 Grams 7 U-1 Power Paper Packet Super 70 Grams 8 Glassy Paper Packets 9 Carbon Half Chorus 10 Carbon Flowers Chorus 11 Register 1 Squad Vijayshree 12 Register 2 Shaft Vijayshree 13 Register 3 Shaft Vijayshree 14 Register 4 Shaft Vijayshree 15 Register 5 Shaft Vijayshree 16 Register 6 Shaft Vijayshree 17 Register 8 Shaft Vijayshree 18 Register 10 Shaft Vijayshree 19 Register 12 Shaft Vijayshree 20 Register 14 Shaft Vijayshree 21 Register Ada 13X16 ( 4 Shaft ) Vijayashree 22 Register Ada 13X16 ( 5 Shaft ) Vijayashree 23 Attendance Register 2Nd Shaft 24 Attendance Register 4 Shaft 25 Canvas Register 1 Shaft 26 Canvas Register 2 Shaft 27 Canvas Register 3 Shaft 28 Canvas Register 4 Shaft 29 Canvas Register 5 Shaft 30 Canvas Register 6 Shaft 31 Canvas Register 8 Shaft 32 Canvas Register 10 Shaft 33 Register Full Size 17X 271 Dasta Vijay Shree 34 Register Full Size 17X 272 Dasta Vijay Shree 35 Register Full Size 17X 273 Dasta Vijay Shree 36 Register Full Size 17X 274 Dasta Vijay Shree 37 Register Full Size 17X 275 Dasta Vijay Shree 38 Register Full Size 17X 276 Dasta Vijay Shree 39 Register Full Size 17X 27 8 Dasta Vijay Shree 40 Register Full Size 17X 2710 Dasta Vijay Shree 41 Register Full Size 17X 2712 Dasta Vijay Shree 42 Duplicate Book No. 3 Superior Vijayashree 43 Duplicate Book No. 4 Superior Vijayashree 44 Duplicate Book No. 5 Superior Vijayashree 45 Dakbook 100 Pages 46 Long Book 50 Pages 47 Long Book 100 Pages 48 File Cover Khaki Plain 49 Pushta File Cover Two&Part Plain 50 Pushta File Cover To&Part Vijayshree 51 Pushta File Cover Two&Part Vijayshree Super Heavy 52 Plain File Spring 53 File Cobra Classicvijayshree 54 File Cobra Super Heavy Vijayshree 55 Box File A&4 Vijayshree 56 Box File A&4 Super Heavy 57 Plastic Folder L Type 58 Stomp Paid Ink 100 M-L- Siren 59 Stomp Paid Ink 200 Ml-L- Siren 60 Stomp Paid Ink 700Ml- Siren 61 Envelopes 11X5 Sunshine 62 Envelopes 9X4 Sunshine 63 Envelopes 8X12 Lamination Yellow Sunshine 64 Envelopes 10X12 Lamination Yellow Sunshine 65 Envelopes 12X16 Lamination Yellow Sunshine 66 White Board 3X2 67 White Board 4X6 68 Pinup Board 3X2 69 Wooden Scale 12 Inch 70 Lace Big Green Thick ( Long ) 9X24 71 Lace Big Green 1X18 72 Lace Big Green3x24 73 Teg Thick 8 Inch 74 Refill Jeter 75 Peshi Ped Plain 76 Peshi Ped Super 77 Muscle Paid Corner Strip Super 78 Muscle Pad Corner Strip 79 Cello Tape Brown 2 Inch 80 Boiled Side Foam Tape 2 Inch 81 Cello Tape Brown 6 Inch 82 Cello Tape White 1 Inch 83 Cello Tape White 2 Inch 84 Cello Tape White 6 Inch 85 Wooden Tocha Square Handle National 86 Alpine 400G Omega 87 Alpine 100G Omega 88 Basta Cloth 1 Meter White Red Yellow Plain 89 Bag Cloth 1 Meter White Red Yellow Khadi 90 Paper Weight Glasses 91 Paper Weight Plastic 92 Stapler Machine Gold-10 Kangaroo 93 Stapler Machine Hd-10Kangaroo 94 Stapler Machine Buddy 45 H-P- Kangaroo 95 Stapler Machine Medium 45H-D- Kangaroo 96 Stapler Peen H-P- 10 No. Kangaroo 97 Stapler Peen Hp-P-24 No. Kangaroo 98 Stom Ped Bada 160 M-M- Camlin 99 Stom Ped Medium 110 M-M- Camlin 100 Pencil Packet Apsara 101 Whitener Pen Mini Camlin 102 Whitener Pen Big Camlin 103 Government Cashbook 100 Pages 104 Government Cashbook 150 Pages 105 Government Cashbook 200 Pages 106 Cashbook 300 Pages Printing Jumbo Size 107 Pen Holder Kent 108 Paper Tray Plastic ( Large ) High Quality 109 Tala Medium 55 Mm 110 Tala Medium 65 Mm 111 Tala Bada 75 Mm 112 Postpaid Plain 113 Postpaid Canvas 114 Four Folder Heavy 115 Four Folder Plain 116 Notepad Vijayshree 3No. 100 Sheets 117 Rubber Band Apple Brand Per Kg 118 Cute Little Kangaroo 119 Kaichi Medium Kangaroo 120 Scissors Buddy Kangaroo 121 Scale 18 Inch Steel Thick 122 Scale 18 Inch Plastic Thick 123 Scale 12 Inch Steel Thick 124 Scale 12 Inch Plastic Thick 125 Lace White Small 126 Gel Refill 127 Feviquick 1 Gram 128 Flexquick 20G 129 Calculator Casio 120D 130 Calculator Ct 120 D J D 131 Sketch Pen Camlin 132 Marker Permanente Mota Camlin 133C Dmarker Camlin 134 Penn Stand Kent 135 Refill Plain 136 T-A- Bill Form 137 Budget Sheet 138 Invoice Form / Duplicate 139 T Pin 100G 140 T Pin 400G 141 Pin Cushion 142 Board Pin Packet 143 U-Pin Packet 144 Paper Cutter 9 Mm Heavy 145 Paper Cutter 18 Mm Heavy 146 Punching Machine Buddy 600 No-Kangaroo 147 Punching Machine Buddy 700 No-Kangaroo 148 Punching Machine Buddy 800 Number Kangaroo 149 G-P-F- Register 5 Shaft Canvas 150 Highlighter Camlin 151 Shopner Apsara 152 Rubber Nymph 153 Pencil Nymph 154 Government Calendar ( Wall Mounted ) 155 Government Calendar ( With Table ) 156 Dak Ped Plain 157 Dak Ped Heavy 158 Kappa Dak Ped Heavy 159D - Clip File Heavy 160 Heavy Strip File 161 Fevigam Big 50Ml 162 Chain Folder File 10 Fold 163 Chain Folder File20 Fold 164 Chain Folder File 30 Fold 165 Chain Folder File 40 Fold 166 Folder File Executive 6 Fold 167 Folder File Executive 12 Fold 168 Folder File Executive 18 Fold 169 Folder File Executive 24 Fold 171 Spiral Node Paid A&4 100 Page Vijayashree 172 Spiral Node Paid A&4 150 Page Vijayashree 173 Plastic Button Folder Plain For Training 174 Plastic Button Folder Medium For Training 175 Plastic Button Folder Premium For Training 176 Training Plastic Button Folder High Premium 177 Laptop Beg 178 Laptop Beg Medium 179 Laptop Beg Premium 180 Beg Premium For Training 181 Notepad 100 Pages Vijayashree 3 No. 182 Notepad 50 Pages Vijayashree 3 No. 183 Long Note Book 60 Pages 184 Long Note Book 100 Pages 185 Long Note Book 156 Pages 186 Child Pen Use And Throw 187 Child Pen Fine Gripcello 188 Bal Pen Butterfly Cello 189 White Board Marker Kemlin 190 A&4 Lamination Envelopes Sunshine 191 A&3 Lamination Envelopes Sunshine 192 Fevicol Tube 30 Ml 193 Fevicol Tube 60 Ml 194 Fevicol Tube 100 Ml 195 Rubber Bands Packet 500G Apple Bands 196 Rubber Bands Packet 100G Apple Bands 197 Color Dust Bean 60 Liters Selon 198 Color Dust Bean 30 Liters Selon 199 Color Dust Bean 20 Liters Selon 200 Dust Bean 15 Liter Cell With Lid 201 Favistic Short 202 Favistic Medium 203 Favisticbada 204 Audit Pacinl 205 Unibalpen 206 Pilot Pen 207 Trimex Pen 208 Parker Pen 209 T-Pin 210 Board Peen 211 Button Folder Double Pocket 212 Button Folder Solo 213 Piano Beg 214 Piano File 215 Wheel White 216 Wheel Color Wheel 217 Lime 1 Kg 218 Ocher1 Kg 219 Spiral 60 Pages Approx 220 Spirals 60-120 Pages 221 Spirals Above 120 Pages 222 Enwise Book With 300 Page Numbering@Binding 223 Diary Premium 224 Diary Super 225 Index File 226 Flag Bembilo 227 Rubber Stamps Per Line 228 Gum Bottle 500 Ml 229 Gum Bottle 250 Ml 230 Binder Clip 51 M M Bembilo 231 Binder Clip 41 M M Bembilo 232 Binder Clip 32 M M Bembilo 233 Binder Clip 25 Mm Bembilo 234 Binder Clip 19 M M Bembilo 235 Binder Clip 15 Mm Bembilo 236 Torch Small Rechargeable 2 Cell Savit 237 Torch Small Rechargeable 3 Cell Savit 238 Torch Small Rechargeable 4 Cell Savit 239 Broom Little Jackson 240 Broom Buddy Jackson 241 Sweeper Zadu Sadi 242 Sweeper Full Size Broom 243 Sink Broom 244 Poucha Mop Vala High Quality High Quality With 245 Poucha Plates 246 Viper Bada Sada 247 Viper Bada High Quality 248 Ghadi ( Wall ) Badi Ajanta 249 Digital Clock Ajanta 250 Tilebrush 251 Supadi 252 Doormat 253 Cells Large 254 All Out Machine 255 All Out Refill 256 Phenyl Pellets Per Kg 257 Phenyl Goli 100 Gms 258 Phenyl Goli 250 Gms 259 Phenyl Goli 500 Gm 260 Cell Hours ( Aa ) 261 Cell Remate ( Aaa ) 262 Mosquito Refills Other Companies 263 Bathroom Cleaner ( Acid-1 Liter ) 264 Phenyl 5 Litres 265 Phenyl Heavy Quality 266 Hendwas Datal Liquid Ka 100 Ml 267 Hendwas Datal Liquid Ka 200 Ml 268 Hendwas Datal Liquid Ka 500 Ml 269 Then 270 Then 1 Litre 271 Then 2 Litres 272 Plastic Bucket 20 Liter Cello 273 Plastic Bucket 30 Liter Cello 274 Table Glass May Finishing Pattern Fit 275 Table Cloth Regine 276 Harpic Bottle 1 Litre 277 Zipper Bag With Lock 5X7 Inch 278 Red Plastic Bag With Lock 11X11 Inches 279 Black Plastic Bag With Lock 11X11 Inches 280 Plastic Box 6X6 Inches 281 Plastic Box 8X8 Inches 282 Plastic Box 10X10 Inch 283 Plastic Box 6X6 Inches 284 Plastic Box 12X12 Inches 285 Acrylic Table Top Elevator 12X15 Inch Premium 286 Sigil Hole Punching Machine 287 Paper Cutter 288 Wire Less Remote Chime Range 289 Lad Bulb 7 Watt 290 Led Bulb 9 Watt 291 Lad Bulb 12 Watt 292 Lad Bulb 18 Watt 293 Water Filter Or Filter Double Layer 294 Table Cleaning Cloth Plain 1X2 295 Table Cleaning Cloth Heavy 1X2 Lint Cloth 296 Room Spray Godrej 297 Flat Sealing Key 298 Brass Key Seal 299 Razor Blade 10 No 300 Bottle 500 Ml 301 Dustbean Polythene 24-36 Color Red-Blue-Yellow Hazard Per Kg 302 Dustbin Polythene 24-36 Color Black Hazard Per Kg 303 Dustbean Polythene 30-50 Color Black Hazard Per Kg 304 Dustbean Polythene 30-50 Color Red-Blue-Yellow Hazard Per Kg 170 Spiral Knot Paid A&4 60 Pages Vijayshree
Contract Date: Nov 05, 2024 Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Madhya Pradesh View Result →
34.
Educational and Research Institute #5099434 AOC
Tender For Library Books , C: The Complete Referenceherbert Schildtmcgraw Hill Education, 2017 , Programming In Ansi C,E. Balagurusamymcgraw Hill, 2019. , Modern C Programming Language Advancevinod Sirvinod Yadav, 2021. , Computer Aided Electrical Drawingm. Yokes, B. S. Nagaraja, N. Nandanphi Learning Pvt. Ltd, 2014 , Hand Book On Home Appliancesl. Palaniappans.P. Publications, 2019 , Study Of Electrical Appliances & Devicesk.B. Bhatiakhanna Publishers, 2024 , Switchgear And Protectionsunil S.Raokhanna Publishers, 2010 , Power System Protection And Switchgearb. Rabindaranath, M. Chandernew Age International, 2012. , Hybrid, Electric And Fuel Cell Vehiclesjack Erjavec And Jeff Ariascengage Learning, 2012 , Alternative Fuel Technology – Electric, Hybrid And Fuel Cell Vehiclesjack Erjavec And Jeff Ariascengage Learning, 2007 , “Modern Electric, Hybrid Electric And Fuel Cell Vehicles:Mehrdad Ehsani, Yimin Gao, Sebastien E. Gay And Ali Emadicrc Press, 2009 , Power Electronicsmd Singh, K.B. Khanchandani,Tata Mc Graw Hill Publishing Company Ltd, 2005 , Programmable Logic Controllersfrank D. Petruzellaindian Edition, Mc Graw Hill, 2023 , Technician’S Guide To Programmable Logic Controllers,Richard A. Coxdelmer Cengage Learning, 2013 , Programming The Raspberry Pi: Getting Started With Pythonsimon Monk, Mcgraw Hill Professional, January 2012 , Internet Of Things (A Hands-On-Approach)Vijay Madisetti And Arshdeep Bahga,University Press , Internet Of Things And Its Applicationsjain, Prof. Satish, Singh, Shashibpb, 2020. , Data Communication And Networkingbehrouz A. Forouzanmc. Graw Hill Higher Education, 2007 , Network Security Essentials: Applications And Standardswilliam Stallingspearson Publications (Prentice Hall), 2011 , Electric Motor Controlstephen L. Hermandelmar Cengage Learning, 2014 , Automotive Mechatronics Automotive Networking · Driving Stability Systemskonrad Reifspringer , Automotive Mechatronics: Operational And Practical Issues Volume 1,B.T. Fijalkowskspringer , Thermal Engineeringprof. B.L. Ballaney, Khanna Publishers. , A Textbook Of Engineering Thermodynamicsr.K. Rajputlaxmi Publications Pvt Ltd,. Reprint 2003 , A Course In Electrical Installation, Estimating And Costingj.B. Guptas.K. Kataria And Sons, Reprint 2022 , Electrical Safety, Fire Safety Engineering And Safety Managements. Rao, R.K. Jain, Prof. H.L. Salujakhanna Publishers, 2012 , Creativity For Innovation Managementina Goller, John Bessantroutledge, 2017. , Design Thinking For Innovation, Research And Practicewalter Brenne And Falk Uebernickelspringer, 2016 , Higher Engineering Mathematicsjohn Birdroutledge, 2021 , Differential Equations And Applicationss. Arumugam, A. Thangapandi Isaac, & A. Somasundaramyes Dee Publishing Pvt. Ltd., 2020 , Vector Analysisp. Duraipandian, & Kayalal Pachaiyappas Chand And Company Limited, 2014. , Calculus Volume I And Iis. Narayanan, & T.K. Manicavachagom Pillais. Viswanathan Publishers Pvt. Ltd., 2007 , Fundamentals Of Entrepreneurshipdr. G.K. Varshneysahitya Bhawan Publications, 2019 , Fundamentals Of Entrepreneurshiph.Nandanprentice Hall India Learning Private Limited, Third Edition, 2013 , Entrepreneurship Development & Managementr.K. Singals K Kataria And Sons, 2013 , Project Management – The Managerial Processclifford F. Gray And Erik W. Larsontata Mcgraw Hill. , Project Management: A Systems Approach To Planning, Scheduling, And Controllingharold Kerznerjohn Wiley & Sons , Banking Theory, Law & Practicedr. K. Natarajanhimalaya Publishing House , Corporate Accountingt.S.Reddy And Dr. A.Murthymargham Publications , Management Accountingt.S. Reddy & Dr. Y. Hariprasad Reddymargham Publications , Energy Management Policypradeep Chaturvediconcept Publishing Company, 1997 , Thermal Management Of Electric Vehicle Battery Systemsibrahim Dinçer, Halil S. Hamut And Nader Javanijohn Wiley& Sons Ltd., 2016 , Battery Management Systems Design By Modellingh.J. Bergveld, Wanda S. Kruijt And Peter P.H.L. Nottenspringer Science Business Media, 2001 , Electric Vehicle Battery Systemssandeep Dhamejanewnes, 2001 , Electric Vehicle Technology Explainedjames Larminie, John Lowryjohn Wiley & Sons Ltd, 2003 , Computer Based Industrial Controlkrishna Kant, Phi Learning Pvt Ltd., 2010 , An Introduction To Automated Process Planning Systemstiess Chiu Chang & Richard A. Wyskprentice-Hall, 2008 , Performance Modeling Of Automated Manufacturing Systemsviswanandham N & Narahariphi Learning Pvt Ltd., 2009. , A Course In Refrigeration And Air-Conditioningarora And Domkundwardhanpat Rai & Sons Publication, 2018 , Textbook Of Refrigeration And Air-Conditioningr.S Khurmi And J.K. Guptas. Chand & Co., 2020 , Printed Circuit Boards: Design – Fabrication Hardcoverr S Khandpurmcgraw Hill Education, 2017 , Happy T. Holden, Printed Circuits Handbookclyde F. Coombsmcgraw Hill, 2016 , Electronic Product Design Volume-I Basics Of Pcb Designer. S.D Mehtas Chand & Company, 2011 , Digital Design: Principles & Practicesjohn F. Wakerlyprentice Hall International, 1999 , Printed Circuit Boards - Design & Technologywalter C. Bossharttata Mcgraw Hill , Electronic Instrument Design: Architecting For The Life Cycle. Kim R. Fowleroxford University Press , Renewable Energy, Power For A Sustainable Futuregodfrey Boyleoxford University Press, U.K., 2012 , Renewable Energy Systemsm. Buchla Davidpearson Education Publication, 2017. , General Aspect Of Energy Management And Energy Auditby Bureau Of Energy Efficiency, Ministry Of Power, Indiasecond Edition 2005 , Energy Efficiency In Electrical Utilitiesby Bureau Of Energy Efficiency, Ministry Of Power, Indiasecond Edition 2005 , Energy Efficiency And Management For Engineers,Mehmet Kanoglu, Yunus A Cengelmcgraw-Hill Education, 2020 , Energy Audit Of Building Systems: An Engineering Approachmoncefkraticrc Press, Dec.2020 , Fundamentals Of Electric Drivesgopal K. Dubeynarosa Publishing House, 2010. , Electric Motors And Drives: Fundamentals, Types And Applicationsaustin Huges, Bill Drurynewnes, 2019 , Rrb 2024 - 2025 Junior Engineer Cbt I & Ii Electrical Engineering Guidegk Publications , Isro Scientist/Engineer(Scientist - C) Electrical Engineering Solved Papers And Practice Testwiley , Operating System Principlesabraham Silberchatz, Peter B. Galvin, Greg Gagne,9Th Edition, John Wiley &Sons,2018. , Data Structures And Algorithms Using Pythonrance D. Necaise , Problem Solving And Python Programming,E Balagurusamy, Mcgraw Hill Education,2017 & First Edition. , Beginning Php6, Apache, Mysql, Web Development”, -Timothy Boronczyk, Elizabeth Naramore, Jason Gerner, Yann Le Scouarnec, Jeremy Stolz,Michael K. Glass Wiley Pub., 2009. , Mastering Cloud Computingrajkumar Buyya, Christian Vecchiola, S. Thamarai Selvi,Tata Mcgraw Hill, 2013. , Cloud Computing: Implementation, Management And Security,Rittinghouse, John W., And James F. Ransome,Crc Press, 2017. , Introduction To Machine Learningethem Alpaydin,Fourth Edition, Mit Press ,2020. , Data Warehousing: Concepts, Techniques, Products And Applicationss. S. V.Rajan. , Computer Security Principles And Practice,William Stallings, Lawrie Brownthird Edition, Pearson Education, 2015 , Artificial Intelligence -Rich, Kevin Knight, Shiv Shankar B Nair, Tmh3rd Edition , Internet Of Things - A Hands-On Approach,Arsheepbahga, Vijay Madisetti, Universities Press,First Edition, 2015. , Web Development With Django,Andrew Bird, Ben Shaw, Bharath Chandra K S, Chris Guest, Saurabh Badhwar,Packt Publishing Limited,2021. , Database System Conceptsabraham Silberschatz, Henry F. Korth, S. Sudharshan, “Seventh Edition, Tata Mcgraw Hill, 2019 , Beginning Android Programming With Android Studiojerome Dimarzio,4 Th Edition. , Let Us Cyashavant Kanetkarbpb Publications, 2018 , Data Structures And Algorithms Made Easynarasimha Karumanchicareermonk Publications, 2017 , Clean Code: A Handbook Of Agile Software Craftsmanshiprobert C. Martinprentice Hall, 2010 , Computer Networksandrew S. Tanenbaum And David J. Wetherallpearson, 5Th Edition, 2010 , Programming In Ansi Ce. Balagurusamymcgraw Hill Education, 8Th Edition, 2019 , Deep Learningian Goodfellow, Yoshua Bengio, And Aaron Courvillemit Press, 2016 , Introduction To Algorithmsthomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest, And Clifford Steinmit Press, 3Rd Edition, 2010 , Object Oriented Programming With C++E. Balagurusamymcgraw Hill Education, 7Th Edition, 2017 , Designing Data-Intensive Applicationsmartin Kleppmannoreilly Media, 2017 , The Complete Reference Javaherbert Schildtmcgraw Hill Education, 9Th Edition, 2014 , Artificial Intelligence: A Modern Approachstuart Russell And Peter Norvigpearson, 4Th Edition, 2022 , Data Science And Machine Learning: Mathematical And Statistical Methodsdirk P. Kroese, Zdravko I. Botev, Thomas Taimre, Radislav Vaismanchapman And Hall/Crc, 2021 , Python For Data Analysiswes Mckinneyoreilly Media, 3Rd Edition, 2022 , Fundamentals Of Database Management Systems. S. Srivastava, Deepak Srivastavabpb Publications, 2020 , Designing Machine Learning Systemschip Huyenoreilly Media, 2022 , Grokking Algorithmsaditya Bhargavamanning Publications, 2Nd Edition, 2023 , Cloud Computing: Concepts And Technologieskumar Saurabhwiley India, 2020 , Practical Statistics For Data Scientistspeter Bruce, Andrew Bruce, And Peter Gedeckoreilly Media, 2Nd Edition, 2020 , Fundamentals Of Data Engineeringjoe Reis And Matt Housleyoreilly Media, 2022 , Mastering Blockchainimran Bashirpackt Publishing, 3Rd Edition, 2020 , Elements Of Workshop Technology Volume I & Iihajra Chowdry & Bhattacharayaiith Edition - Media Promoters & Publishers Pvt. Ltd., , A Textbook Of Workshop Technologyr.S.Khurmi & J.K.Gupta2nd Edition, S.Chand & Co., Ram Nagar, New Delhi – 2018. , Strength Of Materials,R.S. Khurmis. Chand & Co., Ram Nagar, New Delhi. , Nanomaterials : Mechanics And Mechanisms,K.T. Ramesh2009 , A Beginner’S Guide To 3D Modelingcameron Coward , Solidworks 2022 Step By Step Guideamit Bhatt And Mark Wiley , Principles Of Computer Integrated Manufacturings.Kant Vajpayeeprentice Hall India, 1998. , Automation, Production Systems, And Computer- Integrated Manufacturingmikell P. Grooverpearson Education Asia. , A Text Book Of Hydraulics, Fluid Mechanics And Hydraulic Machinesr.S. Khurmi,Edn.18, S.Chand & Co., Ram Nagar, New Delhi – 110 055, Ram Nagar, New Delhi Nagar, New Delhi – 110 055. , A Text Book Of Fluid Mechanics And Hydraulic Machinesr. K Rajputs. Chand & Co , A Textbook Of Mechatronicsrk Rajputs. Chand & Co , Handbook Of Modern Sensors: Physics, Designs And Applicationjacob Fradenfourth Edition, Published By Springer, 2010. , Refrigeration And Air Conditioningp. L. Ballaneykhanna Publishers. , Thermal Engineeringr.K.Rajput8th Edition, Laxmi Publications Pvt Ltd , New Delhi. , Applied Thermodynamicsp.K. Nag2nd Edition, Tata Mcgraw – Hill Publishing Company, New Delhi . , Thermal Engineeringp.L Ballaney24th Edition ,Khanna Publishers, New Delhi. , Applied Metrology For Manufacturing Engineeringammar Grous,Wiley- Iste, 2011. , Metrology For Engineersgalyer, J.F.W. Charles Reginald Shotbolt,Cengage Learning Emea; 5Th Revised Edition, 1990 , Mechanical Measurementsvenkateshan, S. P.,Second Edition, John Wiley &Sons, 2015. , Machine Designpandya & Shah,Edn. 1995, Charotar Publishing House. , Machine Designt. V. Sundararajamoorthy & N. Shanmugam,Revised Edition June-2003–Anuradha Publications. , Design Data Bookpsg College Of Technology,Dpv Printers. , A Textbook Of Machine Designr.S. Khurmi & J.K.Gupta,Edn. 18, Eurosia Publishing House Pvt. Limited. , Cad/Cam/Cimr.Radhakrishnan, And S.Subramanian,New Age International Pvt Limited. , Industrial Engineering And Managemento.P. Khanna,Revised Edition Publications (P) Ltd – 2004, 67/4 Madras House, Daryaganj, New Delhi– 110002. , Engineering Economics And Managementt.R. Banga& S.C. Sharma,Mcgraw Hill Editiion. 2 – 2001, New Delhi. , Essentials Of Managementherald Koontz And Heinz Weihrichmcgraw Hill Publishing Company, Singapore International Edition. Latest , Total Quality Managementdale H. Besterfield, Carol Besterfield-Michna, Glen H. Besterfield, Mary Besterfield-Sacre,Pearson Education. , Statistical Quality Controleugene L. Grant, Richard S. Leavenworth,Tata Mcgraw Hill Education. , Six Sigma For Business Excellence: Approach, Tools And Applicationshemant Urdhwareshe,Pearson Education , Composites Manufacturing-Materials, Product, & Process Engineeringmazumdar, S.K.,Crc Press, 2002. , An Introduction To Metal Matrix Compositesclyne, T.W. And Withers, P.J.,Cambridge Univ. Press 1993. , Composite Materials: Engineering And Sciencematthews, F.L., And Rawlings, R.D,Chapman & Hall, London 1994. , Fundamentals Of Metal Matrix Compositessuresh, S., Martensen, A., And Needleman, A.,Butterworth, Heinemann, 1993. , Fiber-Reinforced Composites: Materials, Manufacturing And Designmallick, P. K.,Marcel Dekker, 1993. , Principles Of Refrigerationroy J.Dossat,5Th Edition, Pearson Publications, 2001. , Refrigeration And Air Conditioningm.Zakria Baig,Premier/ Radiant Publishing House. , Refrigeration And Air Conditioningc.P Arora,Tata Mcgraw Hill Education, 2000. , Value Engineering: Practical Applications For Design, Construction, Maintenance & Operationsalphonse Dell’Isola,R S Means Co., 1997. , Value Engineering: Concepts Techniques And Applicationsanil Kumar Mukhopadhyaya,Sage Publications 2010 , World Commission On Environment And Development (Wced)Our Common Future, .Oxford University Press 2005 , Wastewater Treatmentrao M.N. And Dutta A.K.Oxford & Ibh Publishing Co. Pvt. Ltd., New Delhi, Second Edition, 2006 , Environmental Pollution Control Engineeringrao Cswiley Eastern Ltd., New Delhi, 2006. , Environmental Impact Assessmentcanter, R.L.,Mcgraw Hill Inc., New Delhi, 1996. , Concepts In Environmental Impact Analysisshukla, S.K. And Srivastava, P.R.,Common Wealth Publishers, New Delhi, 1992. , The Management And Control Of Qualityj Evans And W Linsay,6Th Edition, Thomson, 2005 , Handbook Of Condition Monitoringdavies,Chapman & Hall, 2016 , Basics Of Cnc Programmingpawan Negi, Mangey Ram, Om Prakash Yadav,River Publishers, 2022 , Cad/Cam/Cimp. Radhakrishnan, S. Subramanyan, V. Raju,New Age International (P) Limited, 2008 , Industrial Robotics – Technology, Programming And Applicationsp.Groover,Mcgraw Hill, 2001 , Automobile Engineeringg.B.S.Narang,Khanna Publishers, Newdelhi. , Automotivemechanicswilliam H.Crouse And Donald .L. Anglin,Tata Mcgraw– Hill Publishing Companyltd, Newdelhi. , Fundamentals Of Entrepreneurshipdr. G.K. Varshney,Sahitya Bhawan Publications, Agra. , Development And Small Business Enterprisespearson Education, Noida - 201301 , Project Managementpanneerselvam & Senthilkumar,Phi, Delhi, 2009 , Visualizing Project Management: A Model For Business And Technical Success,Kevin Forsberg, Ph.D, Hal Mooz,Second Edition, Pmp And Howard Cotterman, John Wiley & Sons. , Rapid Prototyping: Principles And Applicationschua C.K., Leong K.F., And Lim C.S.,Third Edition, World Scientific Publishers, 2010. , Power Plant Engineeringg. R. Nagpal,Khanna Publishers. , Testing Machines Toolsdr.Georg Schlesingerthe Machinery Publishing Co Ltd,London. , Non Destructive Evaluation And Quality Controlmetals Handbookvol. 17, 9Th Ed., Asm.1989 , Product Design & Developmentkarl T Ulrich, Steven D Eppingertata Mcgrawhill New Delhi 2003 , Product Design And Manufacturinga K Chitale And R C Gupta6th Edition, Phi, New Delhi, 2003. , Electric & Hybrid Vehiclea.K Babukhanna Publication, New Delhi – 2018 Edition , Electric And Hybrid Vehicle Design Fundamentalsiqbal Husiancrc Press, Boca Raton, Florida , Product Design : Techniques In Reverse Engineering And New Product Developmentkevin Ottoisbn-13: 9788177588217, Dorling Kindersley , Solar Energy – Principles Of Thermal Collection And Storagesukhatme S.P. And J.K.Nayaktmh. , Alternative Building Materials And Technologiesk.S Jagadeesh, B.V Venkata Rama Reddyand K.S Nanjunda Raonew Age International , Principles Of Solar Engineeringd.Yogi Goswami, Frank Krieth& John F Kreidertaylor& Francis , Teacher Education For Sustainable Development And Global Citizenship Critical Perspectives On Valuesbamber, P.Curriculum And Assessment. Routledge, (2021). , A Textbook Of Applied Electronics, 3Rd Edition,R.S.Sedha,S.Chand Publications, 2012 , Digital Fundamentals, 11Th Edition,Thomas L. Floyd,Pearson Education, 2017 , Digital Circuits And Design, 5Th Edition,S. Salivahanan And S. Arivazhagan,Vikas Publishing House Pvt. Ltd, 2019 , Linear Integrated Circuits, 6Th Edition,D. Roy Choudhry And Shail Bala Jainnew Age International Pvt.Ltd., 2021 , Design With Operational Amplifiers And Analog Integrated Circuits, 3Rd Edition,Sergio Franco,Tata Mcgrawhill, 2017 , Fundamentals Of Electric Circuits,Charles K.Alexander And Mathew N.O.Sadiku,Mcgraw Hill, 5Th Edition, 2013 , Microcontrollers: Principles And Applications, 1Stedition,Ajitpal,Phi, 2011 , The 8051 Microcontrollers: Architecture, Programming And Applications, 2Nd Edition,K. Uma Rao And Andhe Pallavi,Pearson Education India, 2011 , Data Communication And Networking, 5Th Edition,Behrouz A. Forouzan,Tata Mcgraw Hill, 2007 , Computer Networks, 5Th Edition,Andrew S. Tanenbaum,Prentice-Hall Of India, 2010 , Electronic Communication Systems, 5Th Edition,George Kennedy, Bernard Davis And S.R.M. Prasanna,Mcgraw Hill Education, 2011 , Electronic Communications, 4Th Edition,Dennis Roddy And John Coolen,Prentice-Hall Of India, 2008 , Modern Electronic Instrumentation And Measurement Techniques, 1St Editionalbert D.Helfrick And William D. Cooperprentice Hall Of India, 2007 , , A Course In Mechanical Measurements And Instrumentation And Control,A.K.Sawney And Puneet Sawneydhanpat Rai & Co, 12Th Edition, 2013 , Let Us C, 15Th Editionyashavantkanetkar,Bpb Publications, 2017 , Optical Fiber Communication, 5Thedition,Gerdkeiser,Mcgraw Hill, 2017 , Electronic Communication System: Fundamentals Through Advanced, 5Th Edition,Wayne Tomasi,Pearson Education, 2005 , Wireless Communications, Principles And Practice, 2Nd Edition,Theodore S. Rappaport,Pearson Education, 2010 , Mobile Cellular Telecommunications, Analog And Digital Systems, 2Nd Editionw.C.Y. Lee,Mcgraw Hill, 2017 , Mobile Communications, 2Nd Edition,Jochenschiller,Pearson Education, 2009 , Hand Book Of Biomedical Instrumentation, 3Rd Edition,R.S. Khandpur,Mcgraw Hill Education, 2014 , Bio Medical Instrumentation,M. Arumugam,Anuradha Publications, 2017 , Principles Of Digital Communication,Robert G. Gallager,Cambridge University Press, 2008. , B.P Modern Digital And Analog Communication Systems, 4Th Edition,Lathiandzhiding,Oxford Press, 2011 , Digital Design: Principles And Practices, 5Th Edition,John F. Wakerly,Pearson Publications, 2018 , Embedded Systems: An Integrated Approach, 1St Edition,Lyla B. Das,Pearson Education, 2013 , Arm System On Chip Architecture, 2Ndeditionsteve Furbe,Pearson Education, 2015 , Programmable Logic Controllers, 3Rdeditionf.D. Petruzella,Tatamc-Graw Hill, 2010 , Robotics: Principles And Practice, 1St Editionk.C. Jain And L.N.Agarwal,Khanna Publications, 2009 , Robotics Technology And Flexible Automation 2Nd Editions.R.Deb And S.Deb,Mcgraw Hill Publications, 2017 , A Text Book On Industrial Robotics, 2Nd Editionganesh S. Hegde,University Science Press, 2015 , The Principles Of Computer Hardware, 4Th Editionalbert Alan Clemets,Oxford University Press, 2013 , Pc Hardware – A Beginners Guide, 1St Editionernest Ron Gilster,Mcgraw-Hill Education, 2005 , Computer Installation And Servicing, 2Nd Editiond.Balasubramaniantata Mc-Graw Hill, 2010 , Industry 4.0: The Industrial Internet Of Things, 1St Editionalasdair Gilchristapress, 2017 , Introduction To Industrial Internet Of Things And Industry, 1St Editions. Misra, C. Roy, And A. Mukherjee,Routlege Taylor & Francis, 2020 , Consumer Electronics, 6Th Edition,B.R. Gupta And V. Singhal,S. K. Kataria& Sons, 2013 , Audio Video Systems,2Nd Edition,R.G. Gupta,Tata Mcgraw Hill, 2017 , Power Electronics: Circuits, Devices And Applications, 4Th Editionm.H. Rashid,Pearson Education India, 2017 , Labview Graphical Programming, 4Th Edition,G. Johnson,Mcgraw Hill, 2006 , Artificial Intelligence: A Modern Approach, 3Rdedition,Stuart J. Russell And Peter Norvigprentice Hall Series, 2010 , Wireless Communications, 2Nd Edition,T.S. Rappaportpearson Education, 2010 , Ai For Every One, A Beginners Handbooksaptarsi Gowswamy & Amit Kumarpearson , Graphical System Design Using Labviewdr. Ravi Kumar, Dr, Diliprepro Books , Civil Engineering (Conventional& Objectives Type)R S Khurmi, J K Guptas Chand Publications , Civil Engineering For Competitive Exams P Gupta, Ss Guptacbs Publishers , Strength Of Materialr K Bansallaxmi Publications , Strength Of Materials Ramamruthamdhanpat Rai Publications , Building Materialss K Duggalnew Age International Publications , Building Constructionb.C.Punmia, Ashok K.Jain, Arun K.Jainlaxmi Publications , Transportation Engineerings.P.Chandolas Chand Publications , Estimating& Costing (Theory & Practice)B N Duttacbs Publishers , Concrete Technology (Theory & Practice)M S Shetty, A K Jains Chand Publications , Soil Mechanics & Foundation Engineeringk R Arorastandard Publications , Soil Mechanics & Foundation Engineeringsanthosh Kumar Gargkhanna Publications , Waste Water Engineeringmetcalf & Reddymc - Graw Hills, 4Th Edition , Design Of Reinforced Concrete Structuresn Krishna Rajucbs Publishers, 4Th Edition , Safety Management In Constructions.K.Bhattacharjeekhanna Publications , Irrigation Engineering & Hydraulic Structuresanthosh Kumar Gargkhanna Publications , Surveying Vol Ib.C.Punmia, Ashok K.Jain, Arun K.Jainlaxmi Publications, 17Th Edition , Civil Engineering Drawing & House Planningb.D.Vermakhanna Publications , Auto Biography Gandhiji (Tamil) , ?????? ????????? ?????????? , Lenin: Mudhal Comrade / ????? ???????? (Tamil) , Che Guvera : Vendum Viduthalai (Tamil) , Rajaraja Chozhan (Tamil) , Kamarajar - Vaazhvum Arasiyalum (Tamil) , Ratan Tata/?????? ???? (Tamil) , Periyar (Tamil) , Ambedkar (Tamil) , Subhash - Marmangalin Paramapitha (Tamil) , Life Of Marie Curie Tamil , ????????: ?????? ??? ??????? (Tamil) , ???? ????????? ?????? (Tamil) , ?????? ??????????? ???????? ?????? , Che Guevara Puratchiyalar Aanathu Eppadi? (Tamil) , ????????? ??? (Tamil) , Maha Periava Part 1 (Tamil) , Karikal Chozhan (Tamil) , Marx Enum Manidhar (Tamil) , ?????? ?????? / Steve Jobs (Tamil Edition) , Ramayana (Tamil) , Mahabharatha (Tamil) , Vel Pari (Tamil)Su Venkateshan , Udaiyar (6 Volumes) Hardcover Tamilbalakumaran , Parthiban Kanavu Tamilkalki , Srirangaththu Devadhaigal Tamilsujatha , Sirukathai Ezhuthuvathu Eppad? Tamilsujatha , ???????? ???????????Sujatha , ?????????? ?????Sujatha , ???????? ?????????Sujatha , ??? ???? ???????? ??????????Jeyakandhan , Sila Nerangalil Sila Manidhargal Tamiljeyakandhan , Oru Manithan Oru Veedu Oru Ulagam Tamiljeyakandhan , Parrysku Pojeyakandhan , ??????? ???? ??????Jeyakandhan , Agal Vilakkumu. Varadharasan , ???????????? ?????? ???????? ????????Mu. Varadharasan , The Alchemistpaulo Coelho , Grandpa’S Bag Of Storiessudha Murthy , Thai ( Tamil Translation)Maxim Gorky , Agni Siragugalabdhul Kalam , Lev Tolstoy Short Stories Tamil Translation Book , Around The World In Eighty Daysjules Verne , Periya Purana Kathaigal Tamil , Rabindranath Tagore - Short Stories English , Rabindranath Tagore - Short Stories Tamil , ??? ???????? , ?????? ????????? , ???????? ?????????? , ??????? ??????????? , ??????? ?????????????? , 3??? ????? ????????????? , ???? ????Chandilyan , ??? ????Chandilyan , ??? ????????????? ???????????????? , ???? ???????S. ???????????? , ??????????? , ???? ?????C S ????????? , ???????????????????? , ??????????? ???????????? , ??????????? ??????????????????? ???????? ??? , ?????????? ??????????? ???? ???????? (????? - 1) , ?????????? ??????????? ???? ???????? (????? - 2) , ?????????? ??????????? ???? ???????? (????? - 3) , ?????????? ??????????? ???? ???????? (????? - 4) , ?????????? ??????????? ???? ???????? (????? - 5) , ?????????? ??????????? ???? ???????? (????? - 6) , 101 ?????????????????? ???????????????? ????????? / ?????? ?????????? , ???? (?????????? ????????? ??????? ??????? , ??????? ???????? ??????????Indu Mathi , ???????????????? ????? ???Rahul Sankritiyayan (Author), Muthu Meenakshi (Author) , ???????? ???????????????? ?????? , Gangsta Grannydavid Walliams , The Day Of The Jackal Frederick Forsyth , Calvin And Hobbes Bill Watterson , The Subtle Art Of Not Giving A Duck Mark Mansion , Digital Fortress Dan Brown , A Christmas Carol Charles Dickens , Tale Of Two Cities Charles Dickens => Limited
Contract Date: Nov 05, 2024 Contract Value : ₹ 1.32 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
35.
Civil Aviation #4451513 AOC
Bids Are Invited For Generators And Associated Heating System 1 20 Boiler Shifting Job , Dismantling Job , Fcu , Ppr Pipes , Insulation , Cladding , Maintenance Services , Overhaulingg Services , Spare , Ac Servicing Gemarpts Searched Hot Water Generator, Hsd Fired Boilers, Boilers Strings Used In Gemarpts Searched String: Hot Water Generator Water Audit, Water Drilling Service, Domestic Logistics By Water, Rejuvenation Of Water Bodies, Testing Of Water Quality, Packaged Drinking Water Service, Operation And Maintenance Services Of Power Generator(Dg-Set), Hiring Of Packaged Drinking Water Bottle, Operation And Maintenance Of Water Supply Systems, Supply Of Water Through Tanker - Quantity Based Service Gemarpts Searched Result Generated In Gemarpts Searched String: Hsd Fired Boilers Category Not Available On Gem For The Text String Uploaded By The Buyer Searched String: Boilers Category Not Available On Gem For The Text String Uploaded By The Buyer Centrifugal Fan Blower Relevant Industrial Cooling Fan (Man Coolers) As Per Is 6272 Categories Selected For Notification Water Boiler Improvement And Maintenance Of Hsd Fired Hot Water Total Quantity : 247
Contract Date: Ref. Documents Contract Value : ₹ 11.58 Lakh
Boards / Undertakings / PSU No of Bidders 4
Ladakh View Result →
36.
Petroleum and Natural Gas #4055902 AOC
Bids Are Invited For Custom Bid For Services - Inspection Stability Certificat - TENDER FOR “DISH STATUTORY CERTIFICATION (70 NOS.) AT BPCL MUMBAI” SCOPE OF WORK Dish Statutory Certification as per Maharashtra Factory Rules 1963 of Various Structures at BPCL Mumbai Refinery. 1.1. Inspection / Examination of all the Engineering construction structures and other facilities including foundations which are required to be certified as per rules for issuing Stability Certificate. Various units with their type of Engineering Construction / Structures (indicative only) to be analyzed for stability are given below. Sr. No. DESCRIPTION DISH Approved plan 1 Methyl Tertiary Butyl Ether (MTBE) - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 2 C3/C4 Unit at CCU Plant - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.2018 3 Diesel Hydro Desulphurization (DHDS) Complex and associated utilities and offsite facilities.(Comprising of Sulphur recovery unit, Amine treating unit, sour water stripper, Diesel Hydro Desulphurization, Hydrogen generation unit, DG Set extension at SWPH, MRS-III.) - As per plans approved vide letter no. PLN/331/98/VUM/14228/6 dated 25.06.1998 and PLN/353/09/CPP/2228/6 Dated 16.02.2010 4 Lube Oil Base Stock (LOBS) and associated utilities and offsite facilities.Comprising of Substation for P/H-11 at Rd C61x7 junction near ARU, LOBS Tankfarms and LOBS Pump house) - As per plans approved vide letter no. PLN/470/05/PST/61228/6 dated 28.09.2005 5 Gasoline Splitter and associated Utilities - As per plans approved vide letter no. PLN/353/09/CPP/2228/6 dated 16.02.2010 6 Captive Power Plant (CPP) including its cooling tower, Switch house, Pump House, GT Buildings, Control room building, air compressor, Maint building.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 7 Minas (Waste Water Treatment Plant)- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 8 New High Efficiency Boiler No. 1 - As per plans approved vide letter no. PLN/171/2002/VUM/8228/6 dated 13.05.2002 9 New High Efficiency Boiler No. 2 - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 10 New High Efficiency Boiler No. 3 - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 11 New Ware House Complex (North of Tank 209), Comprising of ground plus one floor building, Cement stores, Chemical house, open yard, Scrap yard. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262 dated 13.05.2002 CRFQ No. 1000421625 Page 2 of 7 12 Weigh Bridge Cabin (For Lorry Loading) - 2 nos. for gross weigh bridge. Comprising of single storied RCC building. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 13 Office Building at Pump House No. 5, Comprising of ground plus two floors of RCC building - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262 dated 13.05.2002 14 Air Drier Shed Near Boiler Plant -Comprising of structural steel shed housing air drier vessels and compressors. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 15 Security Cabin Near Road No. 20 - Comprising of single storied RCC building. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 16 Substation South of Existing Main Receiving Station - Comprising of ground plus two floors with cellar rooms, panel rooms, compressor rooms, transformer yard etc. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 17 New North Gate Cabin on Anik Nallah -Comprising of ground plus one floor RCC structure. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 18 Product Rail Gantry (PDF Gantry) -Comprising of structural steel structure facilitating product loading facility for railway wagons. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 19 Control Room (7000 T Bombay- High) - (Pump house 1A and its control room, extension of substation 13)Comprising of single storied RCC building housing control panels, locker room etc. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262 dated 13.05.2002 20 Maintenance Office at CCU -Comprising of ground plus one floor RCC structure.-As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 21 Motorcycle Shed (Admin Bldg.) -RCC motorcycle shed for parking motorcycles and scooters.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262/6 Dated 13.05.2002 22 Snack Bar at North Gate Comprising of single storied RCC structure. (QRT Building)- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 23 Centralized Control Room at CCU Comprising of ground floor plus two floors RCC building, housing control panels, electrical panels, office rooms, locker rooms etc. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 24 C3/C4 Control Room (LPG) including extension of transformer station 10. Comprising of single storied RCC structure.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 25 Weigh Bridge Cabin Near North Gate (Tare weigh bridge) Comprising of single storied RCC structure.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 26 Time and Pay Office (East Side of North Gate) Comprising of ground plus one floor.-As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 27 Weigh Bridge Cabin at LPG Comprising of single storied RCC structure.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 CRFQ No. 1000421625 Page 3 of 7 28 CPPL Pump House Comprising of structural steel shed with pumps/ motors/ lifting hoist etc.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 29 Switch House/MESS Room/Control Room for CPPL RCC building comprising of ground plus two floors with panel room, control room etc.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 30 Bitumen Filling Gantry Comprising of structural steel shed with pipelines, platforms and loading arms for filling bitumen.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 31 BBU Pump House (North Side) Comprising of structural steel shed with pumps, motors, lifting arrangement etc.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 32 TDU Order Processing (TOPO) Office Comprising of single storied RCC structure. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 33 New Switch House Over Exist. Switch House no. 5 Near Pump House No. 5, Comprising of ground plus two storied RCC structure with panel rooms in ground and second floor.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 34 Fire Fighting Pump House near LPG - Comprising of structural steel shed housing pumps, motors, control room, panel room and battery room. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 35 Pump House No. 1, 7B, 11A Comprising of structural steel shed housing pumps and motors. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 36 Switch House No. 4, 7,7A, 10 Comprising of single storied RCC structures with electrical panels. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262 dated 13.05.2002 37 Transformer Station No. 1, 8, 7, 11, 12, 13, 15 Comprising of RCC structures with transformer yards.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262/6 Dated 03.05.2002 38 Storage Tanks & Spheres (Existing Storage Tanks & Spheres from Drg. NO. 7131 & 1446) Vertical structural tanks supported on earthen pad or RCC ring beam foundations.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 and PLN/175/2002/VUM/8262 dated 13.05.2002 39 Substation HVU (Converted from SW/H No. 4A) at Road 14x11 junction. Consisting of ground plus one floor RCC structure.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 40 BBU Control Room Comprising of RCC structure with single floor.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 41 Steam and Water Analyzer Room at Boiler House Comprising of single storied structural shed with brick wall and AC sheet roof. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 42 Pump House no. 5 including extension by 2 Bays towards North comprising of Structural shed of single storied with roof sheets.- As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 CRFQ No. 1000421625 Page 4 of 7 43 Transformer Station 4 including 2 Nos. Blowers with Shed The existing RCC building of ground plus two floors extended by one floor consists of structural shed with AC sheet roof. - As per plans approved vide letter no. PLN/569/98/VKP/33221/6 dated 15.12.1998 44 R.R. Masonry Boundary Wall of Refinery with Chain Link Fencing, Barbed Wire and Grill Wherever Fixed.- As per plans approved vide letter no. PLN/214/55/24806/A dated 02.06.1955 and PLN/175/2002/VUM/8262 dated 13.05.2002 45 Steel Stacks of Heater 20-F-01 of FCCU and RCC Stack of FCCU Co-Boiler -As per plans approved vide letter no. PLN/671/84/VNK/33314 dated 09.11.1984 46 R.R. Masonry / R.C.C. Retaining Walls for Tank Farms - As per plans approved vide letter no. PLN/689/84/VNK/33262 dated 07.11.1984 and PLN/175/2002/VUM/8262 dated 13.05.2002 47 Steel Stacks of 003-F-01 Charge Heater of CCU, Main Stock of CCU Co- Boiler, By pass Stack of CCU CO Boiler - As per plans approved vide letter no. PLN/348/58/25595/A dated 31.04.1958 48 Steel Stacks of HRSG No. 1, 2, 3 - As per plans approved vide letter no. PLN/569/98/VKP/33221 dated 15.12.1998 49 Steel Stacks High Efficiency Boilers No. 1,2,3 - As per plans approved vide letter no. PLN/666/63/55263/A dated 08.08.1963 50 Steel Stacks (Common) of 60-F-101 & 60-F-102 of ARU and 80-F-320 Heater Stack - As per plans approved vide letter no. PLN/689/84/VNK/33262 dated 07.11.1984 51 Mounded LPG /Propylene Bullets facilities & its pump house, Control room at P/H-5, C3-C4 control room, C3-C4 Substation, - As per plans approved vide letter no PLN/293/2000/MNG/19656/6 Dated 18.10.2000 52 LPG Bottling plant, LPG Filling Shed, LPG Testing building, Compressor Shed, LPG Lorry Loading Gantry, LPG Lorry Weigh Bridge Cabin, worker facilities like canteen/locker room, Foremans office block, Carousel 1, 2, 3 facilities.- As per plans approved vide letter no PLN/173/2002/VUM/8261/6 dated 13.05.2002 53 Transformer Station 6 - As per plans approved vide letter no.PLN/181/99/VKP/5178/6 dated 01.03.1999 54 MMBPL Control room, switch house, & its pump house - As per plans approved vide letter no. PLN/225/98/VKP/33229/6 Dated 15.12.1998 55 New fire station (near admin) - As per plans approved vide letter no. PLN/353/09/CPP/2228/6 Dated 16.02.2010 56 Biogas plant - As per plans approved vide letter no. PLN/171/2002/VUM/8228/6 dated 13.05.2002 57 BBU Plant including all Pump Houses in BBU Plant, Reactor Structure, Switch House, BCU Structure, Control Room and other associated facilities at BBU Plant.- As per plans approved vide letter no. PLN/167/2002/VUM/8259/6 Dated 13.05.2002 58 Pump House 4 - As per plans approved vide letter no PLN/331/98/VUM/14228/6 Dated 25.06.1998 59 White Oil Gantry & Black Oil Gantry - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 60 ONGC Metering Station - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 CRFQ No. 1000421625 Page 5 of 7 61 Pump House 6 - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 62 Slops Pump house & Tanks - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 63 Motor Cycle shed in front of Main Canteen and Scooter Parking shed at North Gate - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 64 Bitumen filling office building at Road A51*A32 (Civil Shop) - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 65 MRS-I, MRS-II, MRS-III Building, Transformer Station 2 -As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 66 AMS Building at SWPH - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 67 Contractor Yard at Road 16 - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 68 Stack Monitoring station at ARU & CPP - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 69 BVRU Plant and its MCC building - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 70 LPG fire vehicle parking shed - As per plans approved vide letter no PLN/175/2002/VUM/8262 dated 13.05.2002 NOTE: All the Units/Areas as mentioned above, consists of Heaters, Heat Exchangers, Coolers, Vessels, Tanks, Heavy / Medium Duty Process Motors, Pumps, Pipe Lines, RCC Structures, Steel Structures for Pump House, Control Rooms, Compressors, Cooling towers etc. 1.2 Detailed scope of work: 1.3.1. Carry out followings tests on Concrete for assessing quality and condition of concrete. These tests are inclusive of spot preparation required for the tests (A) Non-Destructive Test of Concrete as per IS: 13311 (Part 1): 1992: Ultrasonic Pulse Velocity for checking homogeneity of the concrete. (Minimum Nos. of tests to be carried out - 500 Nos.) (B) Non-Destructive Test of Concrete as per IS: 13311 (Part 2): 1992: Rebound Hammer for assessing the likely compressive strength of concrete. (Minimum Nos. of tests to be carried out - 500 Nos.) No separate payment will be made for carrying out these tests. 1.3.2. Carry out visual inspection of all the RCC/Steel structures available under the abovementioned DISH approved plan. CRFQ No. 1000421625 Page 6 of 7 1.3.3. Submit detailed report on health and stability of the engineering construction / structures based on visual Inspection and NDT results along with recommendations. 1.3.4. Prepare and submit two copies of Stability Certificates for the engineering constructions / structures in Form 1A issued by competent person as per the Rule 3A of Maharashtra Factories Rules 1963. 1.3.5. Submit one copy of stability certificates to the Office of Director of Industrial Health and Safety (DISH) for their information and one copy to BPCL along with soft copy for records. 1.3.6. Submit all clarifications, explanations etc. that may be required by Factory Inspector regarding the stability / analysis of engineering constructions / structures. Also, attend to all queries from the department of Industrial Safety & Health during validity of the certificate at no additional cost. 1.3.7. Arrange site visits as required by the Factory Inspectors, including arrangement of transport facilities for their visits and all other facilities the DISH officials may require. 1.3.8. All liasioning activities with the office of DISH and or any other Govt. Department Offices. 2.0 TERMS AND CONDITIONS: 2.1. Necessary documents / drawings of Engineering Construction / Structures, equipments and building to the extent available shall be provided to you by BPCL for conducting your analysis for completion of the work as per scope of work. Except for the above, supply of all materials, equipments, transport, labor, supervision etc. that may be required by you for completion of the work shall be in your scope. 2.2. All the drawing and documents that may be handed over to you during your analysis shall remain the property of BPCL. You shall return all such drawings / documents to BPCL after completion of work. 2.3. Consultants shall make good any damage to our facilities that may be caused by you while conducting test / investigation due to any faulty and / or incompetent handling. 2.4. Consultants shall abide by the safety regulations of the Refinery and existing entry/exit regulations. 2.5. Consultants shall assume all responsibilities for the safety and protection of our men and material while on work. 2.6. Consultants must understand and follow all rules and regulations pertaining to entry in BPCL for your Engineers, Supervisors, and Employees. CRFQ No. 1000421625 Page 7 of 7 2.7. Consultants shall note that all NDT instruments shall be intrinsically safe. 2.8. Consultants shall be required to depute qualified Engineer, supervisor/ supervisors during testing activities at site to look after the job, coordinate with BPCL Engineer, and ensure fulfilment of safety conditions. 2.9. Consultants shall arrange from their side all necessary manpower, tools, and tackles, for carrying out the field activities including preparation of the surface under study by cleaning, removal of rust, paint etc. 2.10. Consultants shall be required to take necessary gate passes from BPCL adhering to BPCL gate pass procedure. 3.0 SCOPE OF SUPPLY 3.1 BY BPCL 3.1.1 Drawings (Subjected to availability) 3.2 BY CONTRACTOR 3.2.1 All equipment, manpower, protective clothing, and safety gears. 3.2.2 Any other item essential to carry out a Structural Stability Audit job, but not explicitly mentioned in BPCLs scope of supply. 4.0. COMPLETION PERIOD: Two Months from the date of award of purchase Order. Total Quantity :
Contract Date: Ref. Documents Contract Value : ₹ 14.40 Lakh
Boards / Undertakings / PSU No of Bidders 5
Maharashtra View Result →
37.
Defence #3735276 AOC
Tender For Improvement To Certain Smq / Omq At Afs Salua; 1 Taking Down Cement Plaster Of Any Description On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc And Removing The Debries Outside Of Mod Land, Complete All As Specified And Directed. 2 Demolition Of Un-Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For And Disposal Of Unserviceable Materials, Debris And Rubbish To A Distance Not Exceeding 100 M, Complete All As Specified And Directed. 3 Cutting Holes In Brick Walls Built In Cement Mortar Or Cement Lime Mortar And Stone Walls For Inserting Holdfasts And Making Good Dismantled Portion In Cement Mortar 1:3 Or In Cement Concrete 1:2:4 Type B-1 ( 20Mm Graded Stone Aggregate ) Exc Half Brick But Not Exc One Brick Thick, Complete All As Specified And As Directed. 4 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) , Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. 5 Taking Down Chowkats Or Frame, N.Exc 1.5 Sqm Each With Shutters ( Without Taking Off Shutter From The Frame ) Complete All As Specified And Directed. 6 Demolition Of Stone Slabs And Tiles Of Any Description Or Any Thickness In Floors, Aprons Etc Laid, Bedded And Pointed In Cement Mortar Complete All As Specified And Directed. 7 Taking Up Or Down Gi Tubing Of 15Mm Bore And Connections, Including Cleaning For Refixing Or Removal To Store, Complete All As Specified And Directed. 8 M&L Brickwork With Fly Ash Bricks, Straight Or Curved On Plan Exc6m Mean Radius Built In Cement Mortar 1:6, Complete All As Specified And Directed. 9 M & L For Rendering 15 Mm Thickon Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 And Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And Directed. 10 M & L For Rendering 15 Mm Thickon Other Than Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 And Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And Directed. 11 Supply Only Liquid Water Proofing Compound Approved Quality, Complete All As Specified And Directed. 12 M & L Forpcc ( 1:2:4 ) Type B-0 ( Using 12.5Mm Graded Stone Aggregate ) As In Roof Paddingincluding Formwork, If Required, Complete All As Specified And Directed. 13 M&L For Non Skidcoloured Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But N.Exc 0.18 Sqm, In Floors Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cement Mortar 1:6, Complete All As Specified And Directed. 14 M&L For Non Skidcoloured Ceramic Tiles 7 To 8Mm Thick Of Approved Shade And Pattern ( Square / Rectangular ) Area Of Each Tile Exceeding 0.18 Sqm But N.Exc 0.38 Sqm, In Floors Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match Over And Including 20Mm Thick Screed Bed Of Cement Mortar 1:6, Complete All As Specified And Directed. 15 M&L For Non Skidcoloured Ceramic Tiles 7 To 8Mm Thick Of Approved Shade And Pattern ( Square / Rectangular ) Area Of Each Tile Exceeding 0.18 Sqm But N.Exc 0.38 Sqm, As In Skirting, Dado, Riser To Steps Etc, Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering In Cement Mortar 1:4, Complete All As Specified And Directed. 16 M&L Forglazed Coloured Ceramic Tiles Of Size 350X250x7mm / 450X300x7mm To 8Mm Thick In Vertical Surface Set And Jointed In Neat Cement Slurry Pointed With White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering Incement Plaster 1:4, Complete All As Specified And Directed. 17 M&L For Scratch Free Dark Shade Vitrified Ceramic Tiles 10 Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match Over And Including 20Mm Thick Screed Bed Of Cement Mortar 1:6, Complete All As Specified And Directed. 18 M&L For Scratch Free Dark Shade Vitrified Ceramic Tiles 10 Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, As In Skirting, Dado, Riser To Steps Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering In Cement Mortar 1:4, Complete All As Specified And Directed. 19 M&L For 18-20Mm Thick Granite ( Of Any Type ) Tiles Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding And Polishing Complete As In Floor, Cooking Platforms And Like Complete Over And Including 15Mm Thick Screed Bed In Cement Mortar 1:6, Complete All As Specified And Directed. 20 M & L For Pcc ( 1:2:4 ) , Type B-1 ( Using 20 Mm Graded Crushed Stone Aggregate ) In In Lintels Upto 1.5M Clear Span, Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, Including Formwork If Required , Upto A Height Of 10.00 Mtr Including Necesasary Scaffolding Complete All As Specified And As Directed 21 M & L For Steel Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc ( Rough Finished Surfaces ) Complete All As Specified Anddirected. 22 M & L For Steel Form Work To Side Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batterfor Rough Finished Surface Of Concrete In Flat Complete All As Specified And Directed. 23 M & L For Steel Form Work To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions And Similar Work Vertical Or To Batterfor Rough Finished Surface Of Concrete In Flat Complete All As Specified And Directed. 24 M&L Reinforced Cement Concrete M 25 ( Design Mix ) Using20mm Graded Aggregate In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span And The Like Complete All As Specified And Directed. ( Note : Reinforcement And Form Work Will Be Measured And Paid Separately Under Relevant Items ) 25 M&L For Rcc M-25 ( Design Mix ) ( Using 20Mm Graded Crushed Stone Aggregate ) As In Foundations, Including Rafts, Footings, Foundation Beams; Etc; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed. ( Note : Reinforcement And Form Work Will Be Measured And Paid Separately Under Relevant Items ) 26 M&L Reinforced Cement Concrete M 25 ( Design Mix ) Using20mm Graded Aggregate In Columns, Pillars, Piers, Posts And Struts And The Like Complete All As Specified And Directed. ( Note : Reinforcement And Form Work Will Be Measured And Paid Separately Under Relevant Items ) 27 S & F Tmt Steel Bars 10 Mm Dia And Over Cut To Length, Bend To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9 Mm Dia Or Securing With Clips Quality Complete All As Specified And Directed. 28 S & F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Strirrups, Spacers And Binders Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire ( Annealed ) Not Less Than 0.9 Mm Dia Or Securing With Clips Etc Complete All As Specified And Directed. 29 M&L For Pcc ( 1:4:8 ) Type D-2 ( Using 40Mm Graded Stone Aggregate ) As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed. 30 Excavation In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, For Lying Of Cable Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard / Dense Soilcomplete All As Specified And Directed. 31 Excavation In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, For Lying Of Cable Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft / Loose Soilcomplete All As Specified And Directed. 32 Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Hard / Dense Soil Complete All As Specified And As Directed. 33 Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft / Loose Soil Complete All As Specified And As Directed. 34 Removing Excavated Material ( Soils ) To A Distance Exc. 250M But Not Exceeding 1.5 Km Including Loading / Unloading Etc And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Pointcomplete All As Specified And As Directed 35 Removing Excavated Material ( Soils ) To A Distancenot Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Pointcomplete All As Specified And As Directed 36 M & Lfor Sand Cushioning Foror Filling Under Floor Or In Foundations Or Under Ground Cable With Locally Available Sand For Protection Of Cable Including Spreading And Consolidations, Complete All As Specified And Directed. ( Note:- Thickness After Consolidation Be Measured For Payment ) 37 M & L For Preparation Of New Plastered Surfaces Of Wall And Applying Two Coats Of Oil Distemper Emulsion ( Ist Quality ) Of Approved Manufacturer Over A Coat Of Priming Paintover And Including 2Mm Thick Wall Care Puttycomplete All As Specified And Directed 38 M & L Forpreparation Ofnewly Plastered Surfaces Of Wall And Applying Two Coats Ofcement Base Paint Over A Coat Of Alkali Resistant Primer , Complete All As Specified And Directed. 39 M & L Forpreparation Of Old Plastered Surfaces Of Wall And Applying Two Coats Ofoil Distemper Emulsion ( Ist Quality ) Of Approved Manufacturerover A Coat Of Primer Paint, Complete All As Specified And Directed. 40 M & L Forpreparation Ofnewly Plastered Surfaces Of Wall And Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm Over New Surfaces, Complete All As Specified And Directed. 41 M & L For Providing Precast Cement Concrete Louvres And Jallies, 45Mm Thick ( Mea Sured Solid ) , Including All Mouldings But Excluding Frame, Type B-0 1:2:4 ( 12.5Mm Graded Agg. ) Set In Cm ( 1:4 ) Of Size 600X600mm , Design As Approved By Ge Complete All As Specfied And As Directed. 42 S & F Steel Windows With Side Hung Shutter Including Projecting Type Hinges As With Steel Handle, Steel Peg Stay Complete With Glazing Bars Dovetailed Or Welded Including Double Lead For Glass And Wiremesh Complete All As Specified And Directed. 43 S & F Steel Windows With Side Hung Shutter Including Projecting Type Hinges As With Steel Handle, Steel Peg Stay Complete Without Glazing Bars Dovetailed Or Welded Including Double Lead For Glass And Wiremesh Complete All As Specified And Directed. 44 S&F 3Mm Thick Sheet Glass, Ordinary Quality And Glazing In Aluminium Section In Square Not Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. 45 S & Fstainless Steel Wire Cloth. 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples, Complete All As Specified And Directed. 46 M & L For Preparation Of Newor Previously Untreated Steelor Iron Surfaces Of Any Description Over 10Cm Width Or Girthand Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxideprimer Complete All As Specified And Directed. 47 Taking Down Old Roof Treatment Materials Fromsurface Of Old Concrete Roof By Picking, Sweeping Clean And Washing Down With Water Using Wire Brush Brooming Down, Removal Of Unserviceable Material Obtained From Demolition To A Distance Of N. Exc 1000Mbeyond The Lead, Including Loading, Unloading And Stacking At The Destination And Applying The Following Treatment All As Directed In Order Of Precedence As Stated :- ( I ) Rendering 15Mm Thick In Cm ( 1:4 ) On Existing Roof Surface True To Level.Ii ) Applying One Coat Of Industrial Bitumen 85 / 25 @ 1.20 Kg / Sqm. ( Iii ) Supply And Laying 3Mm Thick App Based Polymeric Membrane Of Approved Manufactured With Weight Not Less Than 3.60 Kgs Per Sqm Reinforced With Non-Woven Polyester Fabric / Matt Weighing Not Less Than 160Gms Per Sqm Having Softening Point Not Less Than 150 Mm Centigrade, Having Tensile Strength Of 650 N / 5Cm And 350 N / 5Cm In Longitudinal And Transverse Directions Respectively Of The Reinfocred Tearing Strength Of 180 N By Torch Application . Polymeric Membrane Shall Be Taken To A Height Of 30Cm ( Minimum ) And Then Inserted Inside The Groove Of Parapet Wall And Shall Be Finished By A Membrane Flashing. ( Iv ) Applying One Coat Of Aluminium Paint Over App Membrane. 48 Item No 47 Contd....Note :- ( I ) Laying App Based Polymeric Membrane Shall Be Done Torch On Method As Per Manufactures Instructions. . ( Ii ) A Minimum Overlap Of 100Mm And 75Mm Should Be Made At The Endand Sides Of The Polymeric Membrane Respectively And Sealed Alloverlaps And Joints As Per Manufacturers Instruction. ( Iii ) App Based Polymeric Membrane Shall Beof Any One Of The Approved Makes As Specified Here-In-After And Shall Conform To Specifications Given In Is 16540-2017 / Is 16532-2017. ( Iv ) Contractor Shallproduce Necessary Test Certificate Of The Manufacturer To The Engr-In-Chage Before Incorporation In The Work. ( Vi ) Necessary Independent Tests Shall Also Be Carried Out By The Contractor Without Any Extra Cost To The Deptt As Per Relevant Is Specifications And Membranes With Satisfactory Test Results Shall Only Be Incorporated In The Work ( Vii ) The Work Shall Be Executed Through Authorised Applicators Of Original Manufacturer Only ( Viii ) Removal Of Surplus Materials To A Distance Not Exc 1000M Beyond The Lead Is Deemed To Be Included In The Quoted Rate Of Item. 49 S&F Gi Tubing Of 15Mm Dia Medium Grade With All Fitting And Fixed Complete To Walis And Ceilings Or Laid In Floors Complete All As Specified And Directed. 50 S&F In Repairs For15mm Bore , Fancy Type Chromium Plated Bib Tap, Cast Copper Alloy With Capstan Head Long Body And Cup, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And Directed. 51 S&F In Repair Sinks With Drainage Board Made Of Stainless Steel1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm , Incl 40Mm Dia Waste Pipe Of Polythelene Of Low Or High Density, 40Mm Bore Chromium Plated Brass Waste Fitting With Long Screwed Shanks And Fly Nuts, Flange End Bedded In Red Lead Cement & Other End Fixed, Making Holes In Walls For Brackets And Fixed In Cm ( 1:3 ) If Required, Complete All As Specified And As Directed. 52 M & L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block Any Shape And Size Confirming To Is 15658-2006 , M-35 Grade, Paver Block Coloured With Grey Cement And Pigment Laid Over Sand Cushioning All As Specified And Directed. ( Note : Sand Cushioning Shall Be Measured And Paid Under Respective Item ) 53 M & L For50mm Thick Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate As In Sub Base Flooring Including Formwork, If Required, Complete All As Specified And Directed. 54 M & L For Surface Excavation N Exc 30 Cm Deep And Averaging 15Cm Deep And Getting Out Soft / Loose Soil , Complete, All As Specified And Directed. 55 M & Lfor Hardcore Of Gauge N Exc. 63 Mm Broken Stone Or Boulders Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface , Complete All As Specified And Directed 56 S&F Perforated Cutlery Drawerlength 500-550 Mm, Depth- Exc 490 Mm , Height -90 Mm Made Of Stainless Steel Of Grade Is:202.Includinggood Quality Telescopic Channel Set For Movement , If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 57 S&F Plain Basket Drawer Length 500-550 Mm, Depth- Exc 500 Mm , Height -100 Mm Made Of Stainless Steel Of Grade Is:202. ( Allowable Tolerance Limit 20Mm In Dimension ) Including Good Quality Telescopic Channel Set For Movement, If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 58 S&F Cup And Saucer Basket Length 500-550 Mm, Depth- Exc 500 Mm , Height -100 Mm Made Of Stainless Steel Of Grade Is:202. ( Allowable Tolerance Limit 20Mm In Dimension ) Including Good Quality Telescopic Channel Set For Movement, If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 59 S&F Thali Basket Drawer Length 500-550 Mm, Depth- Exc 500 Mm , Height -200 Mm Made Of Stainless Steel Of Grade Is:202. ( Allowable Tolerance Limit 20Mm In Dimension ) Including Good Quality Telescopic Channel Set For Movement, If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 60 S&F D-Tray Dia Of Tray 750 Mm Dia Made Of Stainless Steel Of Grade Is:202. ( Allowable Tolerance Limit 20Mm In Dimension ) Including Good Quality Telescopic Channel Set For Movement, If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 61 S&F Auto Closing Waste Bin Made Of Stainless Steel Of Grade Is:202. ( Allowable Tolerance Limit 20Mm In Dimension ) Including Good Quality Telescopic Channel Set For Movement, If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 62 S&F Bottle Pull Out Made Of Stainless Steel Of Grade Is:202. ( Allowable Tolerance Limit 20Mm In Dimension ) Including Good Quality Telescopic Channel Set For Movement, If Required, Including Necessary Fixing Arrangement To The Kitchen Cabinet / Cupboard Boardwith Glue / Nails / Screw Etc All As Specified And Directed. 63 S & Ffactory Made Ready To Install Non-Toxic, Lead & Cadmium Free, Single Extruded, Water Proof, Termite Proof, Fire Retardant, Excellent Screw Holding Capacity, Solid Pvc Boards 18Mm Thick , One Side Decorative Choice Lamination And Other Side Balacing White As In Cup Board Shutters Fixed To Door Frame With And Including Continious ( Piano ) Hinges, Stainless Steel , Bright Finish Or Electrogalvanised And Width Of Flaps 40Mm ( When Open ) And Stainless Steel Screws Completeall As Specified And Directed. 64 S & Ffactory Made Ready To Install Non-Toxic, Lead & Cadmium Free, Single Extruded, Water Proof, Termite Proof, Fire Retardant, Excellent Screw Holding Capacity, Solid Pvc Boards 18Mm Thick Ofwhite Colour In Cup Board Shelves Fixed To Guide Rails With Stainless Steel Screws Etc Including All Required Accessory And Builders Hardware If Required, Completeall As Specified And Directed. 65 S&F 35Mm Hinge With Self-Closing Cup Cc 48Mm, Clip On, 4 Hole Plate, Hinge With Arm Cover For Kitchen Cabinet / Cup Board Etc Complete All As Specified And As Directed. 66 S & F 125Mm Long Stainless Steel Mirror Finish Modular Kitchen Cabinet Handle Complete All As Specified And As Directed. 67 S & F 150Mm Long Stainless Steel Mirror Finish Modular Kitchen Cabinet Handle Complete All As Specified And As Directed. 68 S & F For Brass Knobs 35-40Mm Dia Complete All As Specified And As Directed. 69 S & F Shelf Support For Kitchen Shelves Complete All As Specified And As Directed. 70 S & F L-Clip For Kitchen Shelves Complete All As Specified And As Directed. 71 Supply, Fixing And Installation Of Wall Mounted Electric Kitchen Chimney Of Size 75Cm, Metal Body, Compact Design Havingsuction Capacity Not Less Than 1400 M3 / Hr Auto Clean Type Touch Control With Wave Sensor Duct Dia 150Mm Including Free Kit For Installation With Duct Cover Of Adequate Size , Complete All As Specified And As Directed. 72 M & L Forconcealed Sub Main Wiring With Two Single Core Pvc Insulated Unsheathed, Multistranded Flexible Copper Conductor 1100Volts Grade, Frlsh Type, Cables 4 Sqmm Drawn Through In And Including Rigid Pvc Heavy Duty Concealed Conduits Medium Grade Not Less Than 20Mm Dia Including 4 Sqmm 1100 Volts Grade, Frlsh Type, Pvc Insulated Unsheathed Multi Stranded Flexible Copper Conductor Cable As Continuous Earth Wire And Connecting To Common Earth Terminals Complete All As Specified And Directed.Note:- ( I ) Two Single Cable For Phase And Neutral One Single Core Green Earth Wire Including One Meter Pvc Conduit Is Measured As One Unit. ( Ii ) Pvc Conduit And Its Accessories Is Deemed To Be Included In This Item Rates. ( Iii ) Unit Rate Include For Cutting Chases For Conduits And Sinking For Boxes Andmaking Good To Wall, Floors Etc. 73 S & F Vertical Type Wall Mounted Storage Water Heater Of Capacity 25 Ltrs Bee 5 Star Rated Or Minimum Standing Loss Of 0.511 Kwh , 240V, 50Hz With Maximum Power Consumption Of 2 Kw , Dry Powder Fero Glass Line Coating Technology For Inner Tank With Incoloy Heating Element , Abs Outer Body , 2 Nos Pvc Connection Pipe With Length Of 450 Mm Length For Hot And Cold Water Supply With Complete Accessories Complete All As Specified And As Directed. 74 S & F Switch Socket Combination, 2 In 1, Multipurpose, Suitable For 6 Pin, 5 / 6 Amp And 15 / 16 Amp Flush Type Including Connection Complete All As Specified And As Directed. 75 M & L For Point Wiring With 1.5 Sqmm Frlsh &Pvc Insulated Unsheathed Single Core Multi Stranded Copper Conductor Concealed Type 1100 Volt Grade Drawnin And Includingnon-Metalicpvcrigid Conduit Of Minimum 20Mm Medium Gradesize For One Light / Fan Point / Bell Point Controlled By One Way Switch Including One 1.5Sqmm Pvc Insulated ( Green Colour ) Unsheathedcopperconductorfor Earth Continuity Conductor And Connected To Earth Dolly And To Be Terminatedto Newsunken / Pressedflushmetalboxesof Thickness 1.2Mm Coveredwith3mm Thick Hylum Sheetasperrequirementatsiteformounting Switches , Sockets , Fanregulatorsetcincludingtestingoncompleteallasspecifiedandasdirected.Note: - ( I ) Rate Quoted Shall Include For Cost Of Making Ms Box And Concealed In Wall Including Cutting And Sinking Of Boxes And Making Good Tothe Walls ( No Extra Payment Will Be Made For The Same ) ( Ii ) Provision Of Blank Plates As Per Site Requirement ( No Extra Payment Will Be Made For The Same ) 76 M & L Forconcealed Sub Main Wiring With Two Single Core Pvc Insulated Unsheathed, Multistranded Flexible Copper Conductor 1100Volts Grade, Frlsh Type, Cables 6 Sqmm Drawn Through In And Including Rigid Pvc Heavy Duty Concealed Conduits Medium Grade Not Less Than 20Mm Dia Including 6 Sqmm 1100 Volts Grade, Frlsh Type, Pvc Insulated Unsheathed Multi Stranded Flexible Copper Conductor Cable As Continuous Earth Wire And Connecting To Common Earth Terminalsincluding Taking Down Of Old Wiringcomplete All As Specified And Directed.Note:- ( I ) Two Single Cable For Phase And Neutral One Single Core Green Earth Wire Including One Meter Pvc Conduit Is Measured As One Unit. ( Ii ) Pvc Conduit And Its Accessories Is Deemed To Be Included In This Item Rates. ( Iii ) Unit Rate Include For Cutting Chases For Conduits And Sinking For Boxes Andmaking Good To Wall, Floors Etc. 77 S & F Copper Wound Exhaust Fan, Steel Bodymade Of Sturdy Engineering Plastic With Louvers Shutter, Ac Single Phase 230V Of Size 250Mm Sweep With, Blades, Complete With Mounting Arrangment As Per Site Requirementand Connecting Wire Up To Nearest Ceiling Rose In Flexible Pvc Pipe Complete All As Specified And Directed. 78 S & F Switch Piano Flush Type, Single Pole, One Way, 5 / 6 Amp, 230 Volts Complete All As Specified And Directed. 79 S&F Ceiling Rose, 3 Phase, Phase / Polycarbonate, Isolated Body, Complete All As Specified And Directed. 80 Material & Labour Earthing Complete Withgalvanised Steel Earth Plate Electrode 60Cmx60cmx6 Mm Thickness Burried Directly In Ground ( Earth Pit Not Less Than 2.25Mtr Deep Below Normal Ground Level ) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level Connected To And Incl Galvanised Earth Lead Wire Of 4.00Mm Dia By Means Of Nuts & Bolts, Check Nuts And Washers Of Galvanised Incl Pcc Pit Of 1:2:4 Type B-1, Cover Reinforced With Xpmweightnot Less Than 4 Kg / Sqm And 6Mm Dia Bar Handle, Earth Pit Angle Iron Frame Of Size 25Mm X 25Mm, Excavation And Earth Work In Anytype Of Soil, Charcoal Dust, Salt, Medium Grade Gi Watering Pipe 20Mm Dia With Funnel And Wire Mesh And Light Grade Gi Protection Pipe Of 40Mm Bore From Top Edge Of Earth Plate Upto Main Distribution Board Complete Allto As Shown In Electrical Plate No 3 Of Mes Sch 2009 ( Part I ) Connected Main Switch Board All As Specified And Testing On Completion, Including Disposal Of Surplus Soil To A Distance Not Exceeding 50M , Complete All As Specified And As Directed. [ Note : ( A ) The Unit Rate Includes For Protection Pipe And Earth Lead Upto 7.5 M. Any Variation In Length Of Earth Leas And Protection Pipe Beyond 7.5 M Shall Be Measured And Paid Seperately. ( B ) Excavation / Earthwork Is Deemed To Be Included In The Quoted Rate. ] 81 Supply And Laying 50Mm Bore Gi Pipe ( Light Grade ) With All Fittings Laid In Trenches Complete All As Specified And As Directed. 82 Supply And Laying 80Mm Bore Gi Pipe ( Light Grade ) With All Fittings Laid In Trenches Complete All As Specified And As Directed. 83 Supply, Laying And Testinglt Cable Xlpe Insulated, Screened, Pvc Bedded, Galvanised Steel Strip Or Wire Armoured Electric Power Cable ( Heavy Duty ) Stranded Aluminium Conductor 1100 Volt Grade Of Size 95 Sqmm, 3.5 Core Complete All As Specified And Directed. 84 Supply, Laying And Testinglt Cable Xlpe Insulated, Screened, Pvc Bedded, Galvanised Steel Strip Or Wire Armoured Electric Power Cable ( Heavy Duty ) Stranded Aluminium Conductor 1100 Volt Grade Of Size 70 Sqmm, 3.5 Core Complete All As Specified And Directed. 85 Supply, Laying And Testinglt Cable Xlpe Insulated, Screened, Pvc Bedded, Galvanised Steel Strip Or Wire Armoured Electric Power Cable ( Heavy Duty ) Stranded Aluminium Conductor 1100 Volt Grade Of Size 35 Sqmm, 3.5 Core Complete All As Specified And Directed. 86 Supply, Laying And Testinglt Cable Xlpe Insulated, Screened, Pvc Bedded, Galvanised Steel Strip Or Wire Armoured Electric Power Cable ( Heavy Duty ) Stranded Aluminium Conductor 1100 Volt Grade Of Size 25 Sqmm, 4 Core Complete All As Specified And Directed. 87 M & L For Manual Boring Under Road And Foot Path For Inserting 40 / 50 / 80Mm Bore Gi Tubing For Drawing Ug Cable, Removal Of Soil Etc Complete All As Specified And Directed. 88 Supply, Layingin Trenches Burnt Bricks Old Size Of 230 X 115 X 75Mm Fly Ash Bricks For Cable Protectioncomplete All As Specified And Directed. 89 M & L For Fabricating, Installation, Testing And Commissioning Of Lt Bus Bar Feeder Pillar Box Outdoor Type Having Provision Of Double Door Opening Into Two Halves With Rubber Beadings Cubical Type Of Size 1.00 X 0.75 X 0.40 Mtr As Directed, Made Out Of 3.15Mm Crca Sheet Compartmentalised With Rubber Beadings, Angle Iron 40 X 40 X 5Mm Shall Be Used For Making Lugs / Frame , Duly Painted With Powder Coated Internally And Externally, Including Aluminium Bus Bar 375 Amps, And Suitable Cable Glands Of Required Size As Per Site Requirement Of Lt Cable Entry Including Foundation Work As Required At Site And Comprising Following:- ( A ) Incoming- Mccb 4 Pole 415 Volts Adjatable Thermal And Fixed Magnetic Settingicu= 100% Ics Type Of Capacity 250 Amps, 25 Ka Breaking Capacity-01 Nos ( B ) Outgoing ( I ) Mccb 3 Pole 415 Volts Adjatable Thermal And Fixed Magnetic Settingicu= 100% Ics Type Of Capacity 100 Amps, 16 Ka Breaking Capacity-03 Nos ( Ii ) Mccb 3 Pole 415 Volts Adjatable Thermal And Fixed Magnetic Settingicu= 100% Ics Type Of Capacity 63 Amps, 16 Ka Breaking Capacity-04 Nos ( C ) Led Indicating Lamps For Main Supplyindicating R, Y B- 01 Set Of 3 ( D ) Vif Digital Meter With Suitable Cts For Ampere And Voltage Display Note ( I ) Pre-Dispatch Inspection At Oem / Factory Premise Shall Be Carried Out By Rep Of Accepting Officer. ( Ii ) Prior To Manufacture, The Contractor Shall Get The Ga Drg Approved From Accepting Officer. ( Iii ) After Installation Of Transformer At Site, The Pre-Commissioning Test Shall Be Carried Out By Sei / Ei. ( Iv ) The Rate Quoted Shall Be Inclusive Of Disconnection Of All Existing Electrical Connections And Reconnecting With The New Panel With New Thimbles And Nut Bolts, Washers Etc And Taking Out Of Old Unserviceable Panels As Directed By Engineer-In Charge. 90 M & L For Fabricating / Cutting / Welding, Installation, Testing And Commissioning Of Lt Bus Bar Feeder Pillar Box Outdoor Type Having Provision Of Double Door Opening Into Two Halves With Rubber Beadings Cubical Type Of Size 1.00 X 0.75 X 0.40 Mtr As Directed, Made Out Of 3.15Mm Crca Sheet Compartmentalised With Rubber Beadings, Angle Iron 40 X 40 X 5Mm Shall Be Used For Making Lugs / Frame , Duly Painted With Powder Coated Internally And Externally, Including Aluminium Bus Bar 200 Amps, And Suitable Cable Glands Of Required Size As Per Site Requirement Of Lt Cable Entry Including Foundation Work As Required At Site And Comprising Of Mccb 100 Amps, 3 Pole -01 No As Incomer And Mccb32 Amps, 16 Ka Breaking Capacity -04 Nos As Outgoing And Suitable Insulators Complete All As Specified And As Directed. 91 Supply, Installation , Testing, Commissioning, Integration And Maintaining The Advance Metering Infrastructure ( Ami ) Of Smart Meters Of Different Makes Having Valid Bis Certification Mark With Specific Cm / L Number ( Not More Than 33% Of Particular Make ) To Ensure Interchangeability At Later Date Using Communication Technology Including Gprs / Rf / Hybrid ( Rf + Cellular ) As Per Cea / Trai Regulations In Order To Achieve Overall Economy In Operation And Maintenance . The Ami Software And Associated Infrastructure Should Be Capable Of Handling Atleast 500 Nos Of Meters In The Present Phase Of Work Of Different Makes Having Valid Bis Licence With Bis:16444 With Expansion Capacity Upto 1500 Nos Of Meters ( During Further Phases Of Smart Meters Work ) Without Any Additional Infrastructure And Cost Implication ( Except Rf / Gprs Meters, Dcu And Software As The Case May Be ) , Including Training And Knowledge Transfer, All Expenditure Incl Periodic Charges Of Telecom Operator From Installation Till Date Of Physical Completion, Obtaining Audit Of Software For Smart Meters By Cert-India Empanelled Firms / Cert Auditor Of Armed Forces, Comprising All As Specified Having Minimum Parameters / Specification As Under:- 92 Smart Rf / Cellular / Hybrid ( Rf+Cellular ) Single Phase Ac Meter Tamper Proof, Static Meter Of Class 1.0, 315 V, 50 Hz, 10 A-60 A Having Valid Bis Licence Of Is-16444 And Relevant Iec Standards With Inbuilt Radio Frequency Communication Facilitywith Self Healing Mesh Network With Default And On Demand Display, Billing Data Generation Facility, Anti-Tamper Features, Microprocessor And Led / Lcd Based Circuitry Including Smc Meter Box Of Minimum Size 250 X 250 X 160 Mm Or As Suitable For 1 Phase Meter With Viewing Glass, Concealed Hinge And Earth Bolt Plugged Complete All As Specified And Directed. Meter Should Support Sending The Following Data : 15 Min Instantaneous Data For Voltage, Current, Power Factor, Power, Cumulative Energy And Frequency, Monthly Billing Survey For Cumulative Energy And Max Demand To Software Meter Should Have Connect / Disconnect Functionality Operable From Mdm / Billing Software And Prepaid Features Would Be Mdm / Billing End As Per Prevalent Is . The Communication System Shall Support: ( A ) On Demand Energy Transfer ( B ) Two Way Communication With Dcu / Hes ( C ) Clock Synchronisation Facility With Hes ( Head End System ) ( D ) Communication Including Different Makes Of Meter Shall Be Such That It Should Communicate With Same Dcu Directly Or Via Mesh Network. ( E ) Meter Protocol Shall Be Open Interface System In Accordance Of Transmission Control Protocol / Internet Protocol. ( F ) The Cost Of The Meter Would Include 2 Years Recurring Sim Charges During The Defect Liability Period. ( G ) The Contractor Shall Keep Sufficient No Of Smart Meter In Reserve For Immediate Replacement In For Faulty Meters To Ensure Zero Downtime. 93 Contd From Boq Item No. 92Notes: ( A ) The Contractor Would Be Responsible From Removing The Existing Meter, Noting Down The Reading And Depositing It With The Mes. ( B ) It Would Be Possible To Run The Meter In Both Prepaid And Postpaid Mode ( C ) The Meters Would Carry 5 Year Warranty. ( D ) The Oem Would Need To Share The Authentication / Encryption Keys Of The Meters Along With Relevant Protocol Details With The Department. The Department Would Need Complete Support Of The Oem To Be Able To Integrate The Meter With Any Software Of The Department Choice. 94 Supply / Planning / Setup / Tuning Of Rf / Gprs / Hybrid ( Rf+Gprs ) Communication Infrastructure Including The Network Management And Headend For The Project The Ip-67 Protection Data Concentrator Units ( Dcu ) Compatible For Remote Automatic Metering Infrastructure ( Ami ) Solution And Capable Of Communicating With The Smart Energy Meter In The Corresponding Frequency Band And With The Data Server Through Gprs / Ethernet. It Would Have Internal Memory To Store Data Of At Least 200 Modules. It Would Have Inbuilt Battery Back-Up. It Would Have Ip-67 Protection. It Would Support Auto Discovery Of The Meters And Self Healing Mechanism For The Breaks In The Rf Network.It Would Have The Following Minimum Features: ( 1 ) It Shall Be Able To Configure The Communication With Underlying Nodes / Meters ( 2 ) It Should Be Able To Pull Data At Conifigurable Frequency From The Nodes / Meters. It Shall Be Able To Prioritise Control Commands. ( 3 ) Dcu Would Support On Demand Data From Nodes. ( 4 ) Dcu Would Support Data Transfer Via Cellular / Optical Fibre Communication. In Case Of Cellular Communication, It Would Support Dynamic Ip Sim From Any Telecom Service Provider ( Minimum 5G / 4G And Fallback To 3G / 2G ) Working In The Location. ( 5 ) Dcu Would Be Able To Communicate To The Nearest Meters Directly. For Farther Meters, It Would Allow Communication Through Exisiting Meters Via Mesh Or Other Formation ( Repeater Meters Etc ) . ( 6 ) Dcu Would Allow More Than One Make Of Meters For The Communication. ( 7 ) Quoted Rates Deemed To Include For Hosting And Gprs Charges / Communication Charges / Broadband Charges For Minimum 2 Years Of Defect Liability Period After Completion. ( Make : Elmeasure / Secure / Schneider / Cyan Cannode As Per Bearing Is No Is-16444 ) 95 Contd From Boq Item No. 94One Lot Of Hes ( Head End System ) / Gateway As Per Design Shall Be Capable Of Meter Data Acquisition At User Selected Period, Mantain Time Synchronism With Smart Energy / Water Meter And Mantain Communication Device Status And Will Provide Visual Interface To View The Data / Events With Following Features: ( A ) Remote Smart Meter Data Reading At Configurable Intervals ( Upto 1500 Meters ) ( B ) Acquisition Of Meter Data On Demand. ( C ) Two Way Communication With Meter / Dcu / Mdms. ( D ) Command For Connect And Disconnect The Smart Meter. ( E ) Audit Report And Event Alarm Logging. ( F ) Encryption Of Data For Source Communication. ( G ) Mantain Time Sync With Dcu / Meter. ( H ) Store Raw Data For Duration Of One Week. ( J ) Setting Of Smart Meter Configurable Parameter. ( K ) Communication Device Status And History. ( L ) Critical And Non Critical Meter Event Like Temer / Power Failure Etc. 96 Supply And Installation Of Single Phase Meter As Repeaters Complete All As Specified And As Directed. 97 Supply And Setup Of Meter Data Management ( Mdm ) System Including Supply And Configuration Of The Web Based Software With Following Modules: ( I ) Meter Data Management Modulethe Meter Data Management Module Would Be Deemed For Collecting The Data From The Meter To Dcu And Server And Vice Versa, Make The Data Available In Bidirectional Mode Ton The Currency Recharge, Online Payment Gateway, Post Paid Billing Modules, Scheduling Maintenance, Low Balance Warning, Quarter Wise Kva Allocation / Tripping, Tariff Regulations, Software Customisations Etc All As Directed By The Engr-In-Charge. ( Ii ) Secure Mobile App / Pc Based / Swipe Machine / Online Payment Gateway / All Upi Platform For All Users Assigned By The Bso / Ge ( A ) 15 Min Instantenous Data From All The Meters For Minimum Seven Parameters- Cumulative Energy, Power, Current, Voltage, Power Factor And Frequency. ( B ) Abstract Download For Monthly And Quarterly Billing Survey Data For Cumulative Energy And Max Demand And Tampering Features. ( Iii ) Billing Module: The Billing Module Capable To Create Data Sheet For Currency Recharges, Recharge History, Maximum Demand Individually, User Complaint Registers, Cheque / Payment Reconcillations, Fixed Charges, Energy Bill Details Etc. ( Iv ) Occupation And Vacation Module: Provision To Enter Admin Controls For Transfers / Vacations. The System Would Support Occupation / Vacation Based On The Unit Categories. The System Would Support Automatic Data Capture On Occupation And Vacation Events. ( V ) Customer Module: The System Would Include A Customer Portal For The Resident / Occupant To Log In And View Their Own Energy / Billing Data. There Would Be Android And Ios Mobile Apps For The User To Monitor Its Own Data And Balance On Regular Basis. 98 Contd From Boq Item No. 97.. ( Vi ) Energy Accounting Modulethe System Would Include Features Of Energy Accounting. The System Would Be Able To Account For Total Energy Block Wise, Facility Wise And Would Also Allow Calculations Of Unaccounted Energy In Case Tally With Incomer Eb Energy Meter. ( Vii ) Communication Modulethe System Would Provide Communication Of Energy Data And Bills Via Print, Email And Sms Methods. ( Viii ) Meter Master Data: The System Would Support Meter Master Data Repository. The System Would Support Meter Replacement Process. ( Ix ) Excel Export:The System Would Support Export Of Metering And Billing Data In Excel Format. ( X ) Customer Care Module - The Software Would Include A Customer Care Module Where The User Would Be Log In Any Complaints. The Service Provider Would Monitor The Complaints And Carry Out The Necessary Activities For The Complaints Resolution. ( Xi ) Meter Installation Module - The Software Would Include An App Based Meter Installation Module Where The Meter Installation Or Changes Can Be Captured On The App Itself And The Readings May Be Demonstrated To The User If Required On The App Itself. ( Xii ) Activities Communication - The Software Support Communication Of The Various Activities Such As Occupation, Vacation, Meter Change. Personal Detail Change Etc. With The User As Well As The Department On Email. ( Make For Mdms : Elmeasure / Secure / Hpl Or Any Techno Commercially Equivalent Make Approved By Ge And Make For Customer Care Solutions Module- Schneider / Innologix / Sap Orany Techno Commercially Equivalent Make Approved By Ge ) 99 Contd From Boq Item No. 97 & 98...Notes: The Additional Functional Requirements Of Mdms Are As Follows: ( A ) Asset Management:I ) Meter Location ( Apartment, Shop, Industry / Address Etc ) .Ii ) Consumer Information ( Name, Account, Id Etc ) Iii ) Meter Details ( Meter No. 1 Phase / 3 Phase, With Or Without Relay Etc ) .Iv ) Meter Configuration ( Demand Integration Period, Load Profile Capture Period Etc ) .V ) Gis Information ( Connection, Feeder / Transformer / Pole Etc ) B ) Meter Data:I ) Accept Meter Data From Hes Process, Store 1500 Meter Data At Least For 6 Month And Analyze.Ii ) Schedule And On Demand Meter Reads And Pinging Of Meter.Iii ) Storage Of All Connected Meter Events And Alarm. ( Storing Of 5 Years Data Or More Via Archiving ) Iv ) Provide Complete History And Audit Trail For All Data For 30 Days ( Configurable Period ) V ) Handle Net Metering / Meters At The Same Premises.Vi ) Manage At A Minimum 15 Mint Interval Data. ( C ) Data Validation, Estimation And Editing ( Vee ) : I ) Registered Read Data: Daily Billiing Cycle, As Well As Derived Billing Determinants Like Tou.Ii ) Interval Data: Variable Intervals And Variable Units Of Measure.Iii ) Calculated Data: Derived Or Computed Such As Determinants Billing And Aggregated Loads.Iv ) Event Data: Event And Alarm Data From Meters, Network Equipment And Mdms Itself. 100 Contd From Boq Item No. 97, 98 & 99 ( D ) Billing Determinants:I ) Configuration Multiple Tou / Tod Options By Customer Type, Day Type ( Weekend, Weekdays, And Holidays ) And By Season.Ii ) Processing Of Interval Data Into Billing Determinants.A ) Total Consumptionb ) Consumption In Different Time Blocks For Tou Billing.C ) Maximum Demand ( Kw And Kva ) D ) Number Of Tamper Countse ) Average Power Factorf ) Ability For Check Metering, Sub Metering Prepaid Metering And Net Metering ( E ) Exceptions:I ) Capture And Log Data Exceptions, Problems And Failures And Send Emails / Sms.Ii ) Generate Exceptions Fora ) Meter Tamper Alertsb ) Communication Module Health Alertsc ) Communication Is Less / More Than Pre-Defined Average Consumptiond ) Negative Consumptione ) Power Outagef ) Demand / Loadg ) Renewable Energy / Ev ( F ) Customer Services:I ) Access To Current And Historical Consumption And Interval Data, Outage Flags, Voltage And Power Quality Indications.Ii ) Email / Sms Notification Of Configured Alarms And Events To Selected Users.Iii ) Web Portal To Provide The Consumer Near Real Time Online Views Of Usage And Cost, Alerts And Notifications And Mobile App. 101 Contd From Boq Item No. 97, 98 , 99 & 100 ( G ) Analysis:I ) Consumption / Load Profiles.A ) Configurable Period ( Hours, Day, Month, Year Etc ) B ) Day Type ( Weekend, Holiday , Festival Wise Etc ) C ) Tariff, Customer Type, Or Any User Specified Collection Of Meters.Ii ) Peak And Off Peak Load Patterns By Aggregating All Loads Of Dt / Feeder / Consumer Group.Iii ) Dt / Feeder Wise Energy Audit.Iv ) Load Forecasting, Load Research.V ) Ability To Configure The System To Effectively Visualise Consumption Trends, Identify Unusual Patterns, And Visualise Load Analysis To Understand Which Assets Are Being Over Utilised. ( Vi ) Analysing Tamper Event Data. ( H ) Reporting:I ) Daily Data Collection Report.Ii ) Usage Exceptionsiii ) Vee Validations Failures.Iv ) Physical Meter Events ( Install, Remove, Connect, Disconnect ) And Meter Resent Report.V ) Meter Flags.Vi ) Meter Inventory.Vii ) Defective Meters.Viii ) Interface Exception Reports Between Mdm And Other Subsystems Eg. Billing, Outage Etc. 102 Desgign, Testing, Commissioning And Integration Of Different Devices Of Different Makes / Equipment / Software As Per Functional Requirements Including Water Charges, Furiture Charges And License Fee.Software Note: ( A ) The Software Would Be Hosted Either On Gcc Server Or On Nic Server. ( B ) The Software Would Contain Two Year Defect Liability. ( C ) Rates Deemed To Include All Operating Expenses Such As Gprs Charges, Hosting Charges Etc. ( D ) Geshall Provide Public Fund Account Details And Contractor Shall Be Responsible For Necessary Arrangement ( Tri Partite ) With Mes And Payment Gateway Integrator ) . ( E ) The Software Would Be Scalable And Expandable For Meters And System Of Different Make Complying With Is16444. The Software Would Be Able To Consumer Web Services Of The Future Projects If Rrequired. ( F ) The Software Would Enable The Features Of Refund Calculation In Case Of Quarter Vacation. ( G ) The Software Sample Approval Would Be Based In Integration Demontstraining Of At Least Four Makes Of The Meters ( 2 Rf At Least And 2 Cellular At Least ) ( H ) The Software Would Support Other Charges Such As Water Charges, Lices Fee, Furniture Charges And Other Allied Charges. ( I ) The Software Would Allow Supporting Both Prepaid And Postpaid Billing Plans. Separate Groups Can Be Created For The Same. 103 Contd From Boq Item No. 102.Note:I ) Cyber Audit: Audit Of Software For Smart Meters Will Be Done By Cert-India Empanelled Firm / Cert Auditor Of Armed Forces. The Cost Of Audit Shall Be Borne By The Contractor.Ii ) Cyber Security: The Following Guidelines / Strategies Shall Be Taken Care Of By The Amisp / Contractor For Making The Entire Ami System Including The Service Provider Immune To Cyber Attacks:A ) All The Hardware, Od And Application Software Shall Be Hardened.B ) Application, Scanning And Hardware Scanning Tools Shall Be Provided To Identify Vulnerability And Security Threats.C ) Data Shall Be Encrypted At System / Device / Technology Level.D ) While Procuring Cyber Security Items Testing Must Be Done And The System Must Be Secure By Design.E ) Residual Information Risk Shall Be Calculated By Contractor And Same Shall Be Submitted For Perusal Of Cyber Audit Teams.F ) Penetration And Vulnerability Assesment Test From Certified Auditors During Feild Acceptance Test ( Fat ) Site Acceptance Test ( Sat ) ( 122 Meter ) And Operation And Maintenance Period. 104 Hosting The System To Government Community Cloud In Place Of Server For Hosting And Management Of Supplied Software Application With Standby Server Comprising All As Specified Having Minimum Items / Specification As Under:- 105 Hosting The Web Based Software Gcc Location Cloud Note: The Gcc Location Would Be As Per The Approved Meity List. In Case A Csp Is Removed From The Panel, The Contractor Would Migrate To A New Supplier. 106 Supply Of Vending Station Desktop With Configuration Of I5, 8 Gb Ram, 1 Tb Hard Disk, 21.5 Monitor, Windows 10 / 11, Ms Office, Wireless Keyboard And Mouse, Cd Rom Read / Write, Usb Ports Including Video Card, Etc. Note ( 1 ) Internet Connection Shall Be Provided In The Name Of The Department, Charges Shall Be Borne By The Contractor. 107 Supply And Fixing Ups With Following Specifications Complete All As Specified And Directed By The Engr-In-Charge: ( A ) Capacity 1000 / 1200 Va Without Output Voltage 230 V Ac +10% Of Frequency 50 Hz + 1% ( B ) Min 30 Min Backup With Full Battery Condition ( C ) Battery Warranty Of At Least 2 Years. 108 Supply And Fixing Of Laser Jet Printer With Single Function Black And White With Usb Connection With Printing Speed Of Min 18 Pages Per Minute With Resolution Of 600 X 600 X 2Dpi Complete All As Specified And Directed By The Engr-In-Charge 109 General Note:Certain DoS And DontS Have To Be Strictly Implemented To Ensure Privacy And Security Of Consumers For Amc Of Smart Metering:DoS:A ) User Id Must Not Reveal Identity And Loactions.B ) User Id To Be Kept In Confidentiality By Competent Authority Mantaining The Overall System.C ) Any Breach Of Information From Server / Cloud Should Immidiately Be Reported To Local Military Authority.D ) Sys Logs By Installing Siem Log Collectors Should Be In Place To Mantain Records.E ) Regular Change Of Passwords In Imperative System Driven Periodic Change Of Passwords To Be Ab-Initio Built Into The Application.DontS:A ) No Personal Identifiable Information ( Piis ) To Be Used In The System.B ) Tampering Of Meter.C ) Disclosure Of Information Of Consumer To Anybody Other Than The Consumer.D ) Access To Servers By Only Authorised Person. 110 ( Comprehensive Operation Work During Defects Liability Period ) :Provision For Comprehensive Operation Including Routine Maintenance Including Repairs / Replacement Of Defective Meters / Dcu And Other Associated Components ( Software / Hardware ) Required To Make The System Alongwith All 122 Smart Meter Functional At All Times Including Periodic Charges Of Telecom Operator, Smart Meter Billing From Completion Of Work Till The Completion Of Defect Liability Period Of 2 Years. 111 Sch A Part-Ii ( Schedule Of Credit ) Note :- Amount Of Rs 32, 800.00Indicated In Tender Documents As Schedule Of Credit Shall Be Deducted From The Total Quoted Amount Of Boq.
Contract Date: Jun 24, 2024 Contract Value : ₹ 3.33 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
West Bengal View Result →
38.
Defence #3709748 AOC
Structure Audit Of Bldg No Np-247 At Dinjan Under Ge ( Af ) Mohanbari , Rebound Hammer For Determining The Estimated Compressive Strength Of Concrete And Uniformity Of Concrete In Terms Of Surface Hardness As Per Is 13311 ( Part-2 ) -1992, Astm C 805-02, Bs 6089:1981 And Bs 1881: Part 202, Bs-En:13791, Also Establishing Correlation Chart Between Rebound Hammer And Other Confirmatory Test For Having Estimated In-Situ Strength Of Concrete If Required. In Absence Of The Confirmatory Test Strength Data Will Be Generated On The Basis Of Empirical Formula ( Obtained From The Calibration Chart ) But Those Results Will Have 25% Variation As Per Is 13311 Part 2 1992 , Ultra Sonic Pulse Velocity For Ascertaining The Quality Of Concrete, Uniformity Of Concrete In Terms Of Soundness And Density Of Concrete As Per Is 13311 ( Part-1 ) -1992, Astm: C597-83, Bs 6089: 1981 And Bs 1881: Part 203 And Bs En: 13791; Also Establishing Correlation Chart Between Uspv And Other Confirmatory Test For Having Estimated In- Situ Strength Of Concrete If Required , Carbonation Test Measurement Of Carbonation Depth By Phenolphthalein Spray Test At Selected Locations ( Drilled Powder Sample Or Concrete Core Sample As Per Site Condition ) On Rcc Members Of The Structures Covered Under The Study To See The Depth Of Carbonation As Per Bs En 14630:2006, Bs En 13295:2004. Cover Depth Is Also Measured At The Same Location To Know The Ration Of Carbonation Depth. , Core Extraction Testing Extracting The Concrete Core Samples Following The Coda Provisions; And Evaluating The Properties ( Fck Value, Grade Of Concrete ) In The Laboratory From The Core Samples Selected. Is456:2000; Is 516:1959, Is 1199:2002; Astm C-42, Without Encountering Any Steel Reinforcement From The Rcc Members Covered Under The Study At Specified Locations By Site In-Charge With Portable Power Driven Core Cutting Equipment. , Resistivity Resistivity Meter Test:- It Is Used In Determination Or Estimation Of The Likelihood Of Corrosion Due To Poor Quality Of Concrete, Correlation To Chloride Permeability, Determination Of Zonal Requirements For Cathodic Protection Systems, Identification Of Areas Within A Structure Most Susceptible To Chloride Penetration As Per Bs En 12696:2000, Rilem Tc-154, Aashto T277 Rcp, Aashto T259, Astm C 1202 97 , Half Cell Measuring The Half-Cell / Surface Potentials At Selected Locations On Rcc Members Of The Structures Covered Under The Study To Understand The Extent Of Reinforcement Corrosion In Terms Of Probable Risk Of Corrosion Of Steel Bar As Per Astm C876 The Rate Shall Include Surface Preparation, Moistening Concrete Surface. , Ph And Chloride Ph Value ( To Check Alkanity Of Concrete ) As Per Relevant B.S. 5328, Aci 201.2R-92 And Aci-318-99, Is 456:2000, Bs 811. , Report Interpretation And Recommendation Preparing And Submitting Comprehensive Report Consisting Of Findings From Visual Inspection, Test Data, Interpretation Of Results, Conclusions And Final Recommendations Along With Sketch Indicating The Location Of The Test. Recommendation Part Does Not Include The Repair Scheme / Dpr Or Boq Related To The Project. Evaluation And Presentation On Recommendations / Suggestions For Approval Measures Of Unesco / Icm / Eag Final Submission. The Hd Quality Site Photographs And Video Shall Be Provided To Employer In A Good Quality Of Cd / Dvd / Usb Hard Disk Along With Softcopy But Any Data Generated From The Patented Software Cant Be Edited So Those Files Cant Be Provided In The Editable Format. , Boq Boq And Conceptual Scheme For Rehabilitation / Retro- Fitting Works ( Feasible And Economic Options ) With Rate Analysis, Material Specification, Execution Drawing For Strengthening Of Structure Along With Technical Specifications And Periodic Inspection And Maintenance. , Material And Labour Laying Well Burnt Old Sizebricks, Straight Or Curved On Plan , Laid Flat With Width Equal To Length Of Brick , Laid Dry Over Electric Cable For Protection All As Specified. => Limited
Contract Date: Apr 18, 2024 Contract Value : ₹ 2.60 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Assam View Result →
39.
Defence #3705223 AOC
Tender For Provision Of Certain Minor And Revenue Works At Bihta Under Age E / M ( Af ) Of Ge ( Af ) Bihta.; 1 Supply, Install, Fixing And Commissioning Split Type Air Conditioner With Cooling Function Eer 3.2 Of Capacity 1.5 Tr, Five Star Rated With Cordless Remote Control Unit And In Built Air Ioniser, Plasma Filter For Better Indoor Air Quality, Five Star Rated Suitable For Wall Mounted, Single Phase, 230 / 250 Volt Ac, With Inverter Technology And 100% Copper Coil Including Breaking Necessary Hole In Wall For Fixing Indoor And Outdoor Unit And Making Good The Disturbed Surfaces With Cement Mortar To Match With Existing Finishes After Commissioning, Making Necessary Connections Unplasticised Pvc Pipes Medium Duty 25 Mm Dia For Draining Out Condensed Water All As Required Including Necessary Connection Complete All As Specified And Directed.Note :- ( I ) Quoted Rates Deem To Be Included Cost Of Drain Pipe, Copper Tubing And 4 Sqmm Multi Standard Copper Cable ( All 3 Mtr Length ) , Outdoor Unit Bracket With Required Fasteners, Cutting Hole In Brick Wall Etc. ( Ii ) Installation And Commissioning To Be Done Through Oem / Itsauthorised Service Centre / Agency. 2 S&F Sheet Metal Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb Of 240 Volts, 20 Amps, C Series, 10 Ka, Complete All As Specified And Directed. 3 S & F Sub Main Wiring Using Approved Colour Coding ( Phase-Red, Neutral-Black, Earth-Green ) Complete With Two Single Core Frls Pvc Insulated And Unsheathed Stranded Copper Conductor Cable 4 Sqmm As Current Carrying Conductor And As Neutral Cable, Voltage Rating 1100 Volt, Isi Marked Drawn In And Including Concealed Pvc Conduit Isi Marked Of Dia Not Less Than 25 Mm And Thickness 2 Mm With Stranded Accessories Along With One Run Of Frls Pvc Green Colour Insulated, Unsheathed, Stranded Copper Conductor Of Size 4 Sqmm, Complete All As Specified And As Directed .Notes: ( A ) Two Runs Of Single Core Frls Pvc Cable With One Run Of Earth Contunity Conductor And Conduit Shall Be Measured As One Unit. ( B ) Cost Of Cutting Chases In Wall For Concealling Conduit And Making Good To Match With Existing Finish Shall Be Deemed Included In The Quoted Unit Rate. 4 Supply And Fixautomatic Copper Wound Voltage Stabilizer For Low And High Voltage Correction Equipped With Electronic Transistorised Relay, Time Relay For Two Minute Suitable For Correction On Single Phase 50 Cycles, Ac Supplyvolt Meter Indicator And Input Voltage 180 V To 300 V And Stabilized Voltage Between 220 ±5% Of Capacity 5 Kva, Complete All As Specified And Directed. Note : This Item Shall Be Fixed With Ac Catered In Respective Item Of This Schedule. 5 Excavation In Trenches Not Exc 1.5 M Wide And Not Exc 1.5 M Deep For Foundation Etc Or For Shafts, Column Footings Or For Laying Cables Etc Not Exc 10 Sqm On Plan And Getting Out In Soft / Loose Soil, Complete All As Specified And Directed. 6 Returning, Filling In Soil Including Spreading, Levelling, Watering And Well Ramming In Layers N.Exc 25 Cm Thick Complete All As Specified And Directed. 7 Removing Excavated Materials ( Soil ) Not Exc 50 M Distance And Depositing Where Directed At A Level Not Exc 1.5 M Above Starting Point, Complete All As Specified And Directed. 8 Supply And Laying Well Burnt Old Size Sub Class B Bricks As Protection To Underground Cables, Laid Dry And Flat Perpendicular To The Direction Of Cable Adjoining Each Other, Complete All As Specified And Directed. 9 M&L Fordry Andfine River Sandfree From Sharp Materialas Incushioning To Cablein Trenches For Cable Protectionincludingnecessary Punning And Consolidation As Required, Complete All As Specified And As Directed. ( Depth Of Sand Shall Be Measured After Punning ) . 10 Supply, Laying, Jointing And Testing Of Cable Xlpe Insulated, Screened, Pvc Bedded, Galvanised Steel Strip Or Wire Armoured Electric Power Cable, Heavy Duty, With Aluminium Conductor, 1100 Volts Grade, Complete All As Specified And Directed For Thefollowing Size Of Cables: - ( A ) Cross Sectional Area 240 Sqmm 3½ Core 11 ( B ) Cross Sectional Area 50 Sqmm 3½ Core 12 ( B ) Cross Sectional Area 35 Sqmm 3½ Core 13 ( B ) Cross Sectional Area 16 Sqmm 4 Core 14 S&F Gi Tubing, Light Grade, With All Fittings And Laid In Trenches / Under Roads, Drains Etc, Or Fixed To Poles / Walls With Fi Clamps, Nut, Bolts Etc And Making Good Disturbed Surfaces, Complete All As Specified And Directed For The Following Bore Of Pipes: - ( A ) 40 Mm Bore 15 ( B ) 50 Mm Bore 16 ( B ) 15 Mm Bore 17 M & L For Drilling Of Suitable Dia Horizontal Bore Holes Suitable For Insertion / Laying Of Pipe Upto 50 Mm Of Any Description Below / Under Road Surface, Floor Etc At Site Including Making Good Disturbed Surface To Match With Existing Strata After Laying Pipe Complete All As Specified And Directed. 18 Supplying, Installing, Testing & Commissioning Out Door Type Cubical Panel Board Outer Shell Made Out Of3.15 Mm Thick Ms Sheet And Inner Shell Made Out Of 2 Mm Thick Ms Sheet And Ms Angle Section 50X50x6 Mm Mounted On Pcc 1:2:4 Type B-1 Platform 60 Cm Above And 45 Cm Below The Ground Level, Frame Factory Fabricated With Front Openable Double Door System And Cable Alloy ( Each Door Hinged With Body At 3 Places With Hinges Welded To Body And Door ) Lockable / Open Able By Keys Having Chromium Plated 19 Mm Dia Fancy Lock, “U” Type Gasket Shall Be Used To Make The Outer Shell Completely Vermin Proof Suitable For 3 Phase 4 Wire 415 Volt, 50 Hz, Tested At Factory Approved From Cpri For 35 Mva Rupturing Capacity At 415 Volts Factory Fabricated Having Modern Fabrication And Testing Process, Complete All As Specified And Directed And Comprising Of The Following: - ( A ) Tpn Aluminium Bus Bar 400 Amps Insulated With Colour Coded Heat Shrinkable Sleeve And Shall Be Mounted On Suitable Size “F” Class Insulators Not Less Than 1.0 Mtr Long. ( B ) Incoming Mccb200 Amps 4 Pole 415 Volts Ac, Icu=100%Ics, Rupturing Capacity 25 Ka, Confirming To Is / Iec 60947-2 - 01 No. ( C ) Outgoing Mccb 100 Amps 3 Pole 415 Volts Ac, Icu=100%Ics, Having Microprocessor Based Release For Over Current, Short Circuit & Earth Fault With Display And Fault Discrimination Rupturing Capacity 25 Ka, Confirming To Is / Iec 60947-2 - 02 Nos. ( D ) -Ditto- But Mccb 63 Amp - 1 No. ( E ) Mcb Tpn32 Amps 16 Ka - 02 Nos . ( H ) Indicator Lamps Led Type Ryb With Holder - 01 Set Of Three. ( J ) Ct Coils Of Suitable Ratio - 01 Set. 19 Supply, Install, Testing And Commissioning Of Out Door Type Cubical Feeder Pillarbox, Tpn Of Size 600X600x300mm Aluminium Bus Bar 200 Amps, Outer Shell Made Out Of 3.15 Mm Thick Ms Sheet Inner Shell Made Out Of 2.00Mm Thick Ms Sheet And Ms Angle Section 40X40x6 Mm On Pcc 1:2:4 Type B-1 Platform 60Cm Above The Ground Level And 30 Cm Below The Ground Level, Frame Factory Fabricated With Front And Back Openable Double Door System Complete Suitable For 3 Phase 4 Wire 415 Volt, 50 Hz With Ip 54. The Bus Bar Shall Be Provide With Sufficient Holes For Distribution Of Lt Supply To 8 Houses Single Phase And Making Necessary Distributions With The Help Of Thimbles Etc, Complete All As Specified And As Directed. 20 M & L For Earthing Complete With Galvanized Steel Earth Plate Electrode 60Cm X 60Cm X 6 Mm Thick, Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Mtr Deep Below Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Meters Below Normal Ground Level, Connected To Galvanised Iron Strip 25X4 Mmas Earthing Leadby Means Of Bolts, Nuts, Check-Nuts, And Washers Of Galvanised Iron Or Steelincluding Excavation And Earth Work, Gi Pipe Medium Grade 32 Mm Bore For Protection Of Gi Strip From Earth Electrodeto Test Point / Machinery / Equipment, Supplying And Laying Charcoal Dust, Common Salt, Pcc ( 1:2:4 ) Type B1 Using 20 Mm Graded Crushed Stone Agregrate Chamber Andrcc Cover 54 Cmx54cm X50 Mm Thick ( 1:2:4 ) Type B-1 Using 20 Mm Graded Crushed Stone Aggregates, Reinforced With 8 Mm Dia Tmt Bars @ 75Mm C / C Both Ways With Mild Steel Handle 12 Mm Dia, Using Round Bar, Pgi Funnel With Wire Mesh, 20 Mm Dia Gi Pipe Light Grade For Watering All As Shown In Electrical Plate No-3 Of Ssr Part-1 And Testing On Completion Includingd Taking Out The Oldunserviceable Earthing Complete All As Specified And Directed. Note - Cost Of Gi Strip And Gi Protection Pipe Up To A Distance 7.5 M Shall Be Included In Quated Rate Of Above. 21 S & F For 4 Pole Mccb 63 To 100 Amp, 50 Hz, 415 V With Rupturing Capacity 16 Ka, Ics = 100% Of Icu, Adjustable Type, Complete All As Specified And Directed. 22 S&F 40 Watt Led Decorative Post Top Gate Light For 360 Degree Indirect Light With Ip 65 Protection And Complete All As Directed. 23 M&L For Fixing Cable Junction Box Lt 3 Phase Type Having Ip 66 / 69 Weather Proof For Outdoor Installation Made Of Plastic Material Of Size 350X250x138 Mm Withopaque Cover, Conical Cable Gland Aluminium Lugs, Protection Class Ip 65, 04 Nos Aluminium Bus Bar Of Size 25X4 Mm For Three Phase And Neutral Including 01 No Mcb Sp 6 Amps For Controlling Street Light And2 Nos Ms Clamp Of Size 30X5 Mm Complete With Nut, Bolt And Washers For Mounting The Junction Box On Street Light Pole Complete And All As Specified And Directed By Engineer-In-Charge. Make-Sintex Product Code-Gsmb 3425 Or Equivalent Make And Model As Approved By The Ge. 24 S&F Pvc Insulated And Pvc Sheathed 4.00 Sqmm Twin Core Round Fr Copper Conductor Industrial Cable, 1100 Volt Grade, Conforming To Is 694 And Making Necessary Connections From Junction Box To Street Light By Using Suitable Size Of Aluminium Thimbles / Terminal Etc And Testing, Complete All As Specified And As Directed. 25 Supply And Fix Gate Light Controller Nature Switch Of 3 Phase 8 Kw ( Swadeep-66-8Kw 3P ) With Contactor, Incoming Mcb & Outgoing Mcb Rating Of 32 Amps & Main Load Circuit Wiring ( Copper ) Of Min Size 10 Sqmm. The Automatic Street Light Control Switch Using Infrared Sensor Based Nature Switch For Automatic Switching Of Street Lights. Nature Switch Operation Should Be Based On Natural Light Lux Level. Required Illuminance Level For Switching On Is =30 Lux And For Switching Off =10 Lux.The Sensor Should Also Have Part Night Operation Facility Of Minimum 4 Hrs To Max 12 Hrs. The Sensor Alongwith Suitable Power Contactor ( S ) And Incoming And Outgoing Mcbs Should Be Enclosed In A Pole / Wall Mountable Rust Proof, Electric Shock Proof, Terminate Proof And Fr Grade Ip66 Protection Class 2 Enclosure Made Of Thermoplastic Polycorbonate And Protected Against Weather Influences. The Circuit Should Have Provision For Manual Operation ( I.E. Sensor By-Pass Option ) . Make Of Panel Consisting Of ( I ) Nature Switch - Healer ( Ii ) Contactors - Bch ( Iii ) Mcbs - Hager ( Iv ) Enclosure - Hensel, ( V ) Circuit Wiring - Polycab. ( Vi ) Contactor Should Confirm To Iec-60947-4-1 / Is-13947-4-1 And Mcbs Should Conform To Iec-60898 / Is-8828 Or Another Make As Approved By The Ge. 26 Taking Down Carefully Copper / Aluminum Concealed Flame Proof Point Wiring ( Light / Fan / Socket / Power ) Complete Including Fittings And Fixtures Such As Switches, Ceiling Roses, Pendents, Regulators, Sockets, Light Fittings, Sunk Box, Steel Terminal Box, Laminated Sheet With All Accessories Etc. And Making Good Finish Of The Disturbed Surfaces Of Walls In Line With Existing Wall Etc Complete All As Specified And As Directed. 27 Material And Labour For 304 Grade Stainless Steel Sheet Having Thickness 3Mm For Replacing Laminated Sheet Cover Wherever Required Complete With Nut, Bolt And Washers And Complete All As Directed And Specified By Engineer In Charge. 28 Material & Labour For Fixing Spot Light Bracketmade Out Of Gi Pipe Light Grade 40Mm Bore Approx Length Not Less Than 190 Cm At A Distance Of 1 Foot From The Wall ( For Fixing Of Spot Lights ) Including New Clamps On Both Ends Of The Wall, Made Out Of Ms Flat Of Size 30X5mm Thick Including Cutting, Welding, Drilling Holes, Nut Bolts, Washer, Etc Including Applying Two Coats Of Aluminium Paint Over One Coat Of Red Oxide Primer On Ms Work And Complete All Asspecified And Directed By Engineer In Charge. 29 S&F Led Spike Light ( Spot Light ) Environmental Friendly, New Generation, Energy Saving, Decorative Type Having Ip66 Protection Led Spike Light Using Cob Led As Light Source And Complete All As Directed. Make : Havells Cat Part No-Lycussps15wled730psymbotg Or Equivalent. 30 M&L For Concealed Point Wiring Complete With Pvc Frls Insulated And Unsheathed Cable 2.5 Sqmm ( Nominal Area ) Multi Stranded Copper Conductor Single Core Conforming To Is : 694 Medium Duty Concealed Stove Enamelled Steel Conduit Conformingto Is : 9537 ( Part-3 ) And Isi Marked Not Less Than 20 Mm Dia With Concealed In Wall Pressed Steel Terminal Boxes Not Less Than 1.2 Mm Thick Of Required Size ( Factory Made ) Including Painting Terminal Boxes Inside And Outside With Two Coats Of Synthetic Enamel Paint Over One Coat Of Red Oxide Primer And Withtop Cover 3 Mm Thick Of Plastic Laminated Sheets Of Required Colour Complete With All Accessoriesand Including Pvc Frls Insulated And Unsheathed Cable 2.5 Sqmm ( Nominal Area ) Multi Stranded Copper Conductor Single Core Conforming To Is: 694 Of Green Colour As Earth Wire To Common Earth And Connected To Earth Dolly Drawn In Same Concealed Conduit Complete For The Following: - ( A ) One Light / Fan / Exhaust Fan / Power Socket Outlet Point Controlled By One Switch 31 S & F Flame Proof Switch Rotary Type With Termination Box In Lm 6 / 16A Single Pole 250 Volt All As Specified And Directed. Make-Shyaam / Sudhir Or Equivalent. 32 Supply And Fixing Stainless Steel Flexible Wire Conduit Having Cross Sectional Area 30Sqmm For Enclosing Open Wire Whereever Required And Complete All As Specified And Directed By Engineer In Charge. 33 Supply And Fixing Stainless Steel Saddle Suitable For Clamping Purpose Of Above Mentioned Stainless Steel Flexible Conduit And Complete All As Specified And Directed By Engineer In Charge. 34 S & F Led Bollard Made Up Of Extruded Aluminium With Pc Diffuser With Fitting On Gi Pipepipe 12 Watt With Ordering Code Surya Sle Bl 12W-Blk800 Or Equivalent As Approved By The Ge, Complete All As Specified And Directed 35 S&F Sheet Metal Enclosure 2 Way Single Door Ip-43 With Complete Including One Single Pole & Neutral Mcb 6A 10 Ka C Series, Fixed Flush Into Walls And Making Good Disturbed Surfaces, Complete All As Specified And Directed. 36 Supplying And Fixing 1100 Volts Grade Heavy Duty Cable Pvc Insulated Aluminium Conductor, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections 4 Sqmm Multi Stranded, Complete All As Specified And Directed. 37 M&L For Conducting Of Energy Audit Of Complete Electrical System Of All Assets All As Specified And Directed By Engr-In-Charge.Notes :- ( I ) Energy Audit Company Must Be Registered With Bee. ( Ii ) The Audit Must Be As Per Iso 50002:2014. ( Iii ) The Transformer / Vcb / Motor / Pump Set / Dg / Stabilizer / Isolation Transformer / Cables / Oh Conductors / Lt / Ht Panels Or Any Other Devices / Panels / Equipment Shall Be Analysed / Audited Catering All The Pump Houses And Power Houses. ( Iv ) All The Machine / Devices / Tools / Equipment Required The Rates Are Included In Schedule Rates. ( V ) Energy Audit Reports Must Contain Energy Consumption / Balance And Energy Efficiency And Shall Be Submitted To Ge ( Af ) Bihta 38 Supply And Install Air Conditioner, Vertical Pack Type Units Indoor / Outdoor Complete With Cordless Remote Control Unit, Twin Rotary Compressor, Single Phase Units 220V - 240V, 50 Hz Of Capacity 2.5 Tr, With Noise Supression Technology And Time Temperature Display, Minimum 3 Star Rated With All Inbuilt And Connected Accessories Provided By Company In Box, With Inverter Technology And 100% Copper Coil, Complete All As Specified And Directed. 39 S & F Sub Main Wiring Using Approved Colour Coding ( Phase-Red, Neutral-Black, Earth-Green ) Complete With Two Single Core Frls Pvc Insulated And Unsheathed Stranded Copper Conductor Cable 6 Sqmm As Current Carrying Conductor And As Neutral Cable, Voltage Rating 1100 Volt, Isi Marked Drawn In And Including Concealed Pvc Conduit Isi Marked Of Dia Not Less Than 25 Mm And Thickness 2 Mm With Stranded Accessories Along With One Run Of Frls Pvc Green Colour Insulated, Unsheathed, Stranded Copper Conductor Of Size 6 Sqmm, Complete All As Specified And As Directed .Notes: ( A ) Two Runs Of Single Core Frls Pvc Cable With One Run Of Earth Contunity Conductor And Conduit Shall Be Measured As One Unit. ( B ) Cost Of Cutting Chases In Wall For Concealling Conduit And Making Good To Match With Existing Finish Shall Be Deemed Included In The Quoted Unit Rate. 40 M & L For Suction And Discharge Copper Tubing Of Appropriate Dia And Thickness Suitable For Vertical Pack Type Ac Of Capacity 2.5 Tr With Black Insulating Material Fixed On It, Complete All As Specified And Directed.
Contract Date: Jan 17, 2024 Contract Value : ₹ 19.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Bihar View Result →
40.
Defence #1894622 AOC
Providing Of Electric Energy Audit Work At Yol Cantt , Physical Inspection Of The Equipment / Installation To Observe And Comment On:- ( A ) The Compliance To Local Regulations And Local Engineering Standards . ( B ) The Extent Of Compliance To Recognized International Engineering Standards E . G . Nfpa70 , Nfpa70b , Nfpa 70E , Bs7671 , Iec60364 , Cenelec Hd384 Or Equivalent . ( C ) General Safety Requirements Of The Electrical Installation . ( D ) Basic Housekeeping And Hygiene For Electrical System . ( E ) Electrical Hazards & Adequacy Of Controls . ( F ) Review Of Compliance With Implementation Of Hazardous Area Classification Report , Wherever Applicable . ( Report Needs To Be Made Available To The Auditor ) ( G ) To Review Adequacy Of Inspection And Testing Of Protective Equipment And Protective Tools . ( I ) Studying Various Parameters From Log Book Dash Board And Instruments At The Panel , Cross Checking Ct Ratios , Plug Multiplier Setting And Time Multiplier Setting Including Over Current And Earth Fault Protection . ( Ii ) The Load On Each Switchgear Will Be Studied , Its Loading Patten And Recommendations Will Be Funished In Report . ( Iii ) The Energy Audit Studies Should Cover Main Receiving Station , Switchgear , Centralised Reactive Power Compensation , Kva-Kms Etc And Also The Possible Improvements In The Metering Etc Wherever Feasible At Main Receiving Station . , ( A ) Review The Power Distribution System And Electrical Installations For Protection Systems Adequacy And Related Hazards . ( B ) Review Of Operation And Maintenance System . ( C ) Review Of Access And Control For Electrical Installations For Both Ht And Lt System . ( D ) To Review Adequacy Of Inspection And Testing Of Protective Equipment And Protective Tools . ( E ) Study Of Transformers Installation:- ( I ) Inspection By Walk Through At The Transformer Inddor / Outdoor Locations And Carrying Out Measurement With Instruments At Feeders And Arriving At The Loading Patten , Adequacy Of Swtichgear To Quench Fault , Overloading Etc And Finding Out Percent Loading . ( Ii ) The Audit Scope Will Include Study Of Nos Of Transformers From 63Kva To 500 Kva Location Under Ge ( Kh ) Yol Cantt Jurisdiction Their Loading Patten . ( Iii ) Reconfiguration , Renetworking , Load Balancing , Losses And Efficiency And Possible Suggestion To Improve Efficiency And With Recommendation Of Life Based On Life Cycle Cost . ( Iv ) The Audit Scope Will Also Include Study Reactive Power Compensation , Power Factor Improvement And Other System Adjacents In The Transformer Substation . ( V ) Power Quality With Power Quality Analyzer On 56 Nos . Of Transformers Current , Voltage , Power Factor , Harmonics Up To 30Hz , Active Power , Energy Loss Calculator , ( A ) To Review The Adequacy Of Electrical Ppe Being Used For Electrical Works Including Testing Equipment . ( B ) Review Of Emergency Lighting Adequacy . ( C ) Vibration Analysis: Spectrum , Time Waveform , Envelope Spectrum Of Dg . ( D ) Study Of Dg Sets Installation 20 Kva To 200 Kva :- ( I ) Inspection By Walk Through At The Dg Set Installations At Various Locations And Carrying Out Measurement With Instruments . ( Ii ) Motors / Mccbs / Acbs / Sfus / Fus / Changeovers Etc And Arriving At The Loading Pattern , Adequacy Of Switchgear To Quench Fault , Overloading Etc And Finding Out Percent Loading . Parallel Running And Diverting Critical Load Will Be Seen At The Dg Sets Locations . ( Iii ) The Study Would Include Specific Fuel Consumption And Per Unit Cost Of Generating Electricity Besides Working Out Alternate Fuel Strategy And Energy Efficiency Point Of View For Reactive Power Compensation . , Review Of Lightning Protection System ( Basis Of Review: Design Calculations And Recommendations Report , Made Available To The Auditor ) To Review Overall Understanding Of The Electrical Safety Requirements By Operations And Maintenance Staff . , Study Of Street Light System :- ( I ) Inspection By Walk Through At The Various Street Lighting In Cantt Area Covering Street Light Panels Fucntioning Of Photo Switches , Controls , Relay , Timer And Other Control And Taking Measurement At Strategic Points In Cantt . ( Ii ) Comperehensive Study Of The Entire Lighting System Covering The Light Source ( Lamps ) , Luminaire ( Reflectors Etc ) And The Gear ( Ballast / Drivers ) Would Be Taken Up For The Street Light Feeders Of The Premises . ( Iii ) Besides This The Illumination Levels On The Roads Required Viz-A-Viz Available Would Also Be Studied . Recommendations Of Auditor To Implement In Efficiency Of Lighting System Note : The Rate Quoted Is For Entire Lighting System From Control Panel To End Light Will Be Considered As One Job . , Thermography Of Panels To Be Done By Flir E Series Thermal Imager At Each Panel . , To Review Protective Earthing System Of All The Substations / Installation Of Cantt Premisses . , Complete Sketch On Acrylic Sheet Of Size 2Mtr X 3Mtr Of Existing Electric System ( Ht & Lt Network With Different Colour ) Shown With Location Of All Substation And Power Transformer Location ( Hard And Soft Duplicate Copy ) . , Fire Safety Audit , Judicious Utilisation Of Electric Supply At Various Location In Cantt With Standard Electric Pattern In Otms , Offices And Residential Accommodations And Recommendation Render Report In Details For Each Job , Illumination Measurement Lux Level Monitoring At Electrical Room . , Electrical Safety Audit For Domestic Ac , Refrigerator , Induction Motors And Ups Under Ge ( Kh ) Yol Jurisdiction .
Contract Date: Sep 02, 2020 Contract Value : ₹ 9.14 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Himachal Pradesh View Result →
41.
Defence #1893086 AOC
Supply Of Electric Energy Audit Of Assets Held On Charge Of Ge Af Bihta , 1 . The Following Job Work Is Required To Carry Out Electrical Energy Audit Of Assets Held On Charge Of Ge ( Af ) Bihta In Respect Of Air Force Station Bihta And Air Force Station Darbhanga Broadly Include . ( A ) Complete Survey Of The Entire Electrical Distribution Networks Starting From Main Receiving Station 33 Kv / 11Kv ( Mrs ) In Both Tachnical Areas And Domestic Areas To Include Survey Of The Facility / Plants And Their Current Energy Consumtion Pattern And Submit In Form Of A Comprehensive Survey Report . ( B ) Checking The Strength Of Primary / Secondary Aspects , Insulation Level , Power Efficiency And Power Factor . ( C ) Bench Marking Of Energy Performance And Matching Of Energy Use To The Requirement , Ways To Maxime System Efficiencies , Optimizing The Input Energy Requirement Etc . ( D ) Target To Achieve Energy Cost Reduction & Identify Energy Conservation Technologies , Retrofits Energy Audit Procedure And Aligning Current Consumption With Current Industry Benchmarks . ( E ) Investigating The Existing System To Bring Out Basic Five Aspects As Given Below :- ( I ) How Much Energy Is Being Consumed ? ( Ii ) How Is The Energy Being Consumed ? ( Iii ) Where Is The Energy Being Consumed ? ( Iv ) When Is The Energy Being Consumed ? ( V ) What Is The Quality Of The Energy Consumed ? ( F ) Give Recommendation On The Basis Of The Survey Reoprt To Include Cost Effective Measures To Optimize Energy Resources And Methods To Achieve Maximum Energy Efficiency Of All Assets Alongwith Boq / Financial Evaluation / Specificiations / Approved Brands Etc So As To Aid In Preparation Of Dpr And Conculsion Of Contracts In Near Future . Note : Areas Covered By Electrical Energy Audit ( I ) Complete Electrical Distribution Network ( Sld ) Showing Grid Sub Station With All Power Transformers And Distribution Transformers . ( Ii ) Complete Analysis Of Electrical Parameters I . E Voltage , Current , Frequency , Power Factor Etc . ( Iii ) Health Status Of All Electrical Measuring / Controlling And Tripping System Of Mrs . 2 . Details Of Electical Assets Is Attached As Appx A And Appx B However The Firm Intersted To Bid For The Subject Work Is Expected To Clear The Aspects Regarding Total Assets Once Again From Ge Before Submitting The Bid And No Representation In This Regard At The Later Stage Will Be Entertained . 3 . The Energy Audit Will Be Deemed To Considered Completed On Successful Submission Of :- ( A ) Surevey Report To Include Specific Recommendations On Each Aspect As Bought Out Above Alongwith Boqs -05 Copies , Duly Recommended By Ge And Final Technical Check And Completion Certificate From Dcwe ( E / M ) . ( B ) Full Payment Against Same Will Be Released On Completion Of Job . ( C ) Total Time Period For Completion Of Job Is 60 Days From Issue Of Job Order . For Any Further Delay , Refer To Terms And Conditions Of The Subject Quotation Is Attached As Appx C . 4 . Report Will Be Submitted Separtely For Af Stn Bihta & Af Stn Darbhanga .
Contract Date: Oct 26, 2019 Contract Value : ₹ 94,500
Statutory Bodies & Commissions/Committees No of Bidders 4
Bihar View Result →
42.
Defence #1892298 AOC
Tender For Quotation For Electric Energy Audit Of Assets Held On Charge Of Ge ( Af ) Bamrauli , 1 . The Following Job Work Is Required To Carry Out Electrical Energy Audit Of Assets Held On Charge Of Ge ( Af ) Bamrauli In Respect Of Air Force Station Bamrauli Broadly Include . ( A ) Complete Survey Of The Entire Electrical Distribution Networks Starting From Main Receiving Station 33 Kv / 11Kv ( Mrs ) In Both Tachnical Areas And Domestic Areas To Include Survey Of The Facility / Plants And Their Current Energy Consumtion Pattern And Submit In Form Of A Comprehensive Survey Report . ( B ) Checking The Strength Of Primary / Secondary Aspects , Insulation Level , Power Efficiency And Power Factor . ( C ) Bench Marking Of Energy Performance And Matching Of Energy Use To The Requirement , Ways To Maxime System Efficiencies , Optimizing The Input Energy Requirement Etc . ( D ) Target To Achieve Energy Cost Reduction & Identify Energy Conservation Technologies , Retrofits Energy Audit Procedure And Aligning Current Consumption With Current Industry Benchmarks . ( E ) Investigating The Existing System To Bring Out Basic Five Aspects As Given Below :- ( I ) How Much Energy Is Being Consumed ? ( Ii ) How Is The Energy Being Consumed ? ( Iii ) Where Is The Energy Being Consumed ? ( Iv ) When Is The Energy Being Consumed ? ( V ) What Is The Quality Of The Energy Consumed ? ( F ) Give Recommendation On The Basis Of The Survey Reoprt To Include Cost Effective Measures To Optimize Energy Resources And Methods To Achieve Maximum Energy Efficiency Of All Assets Alongwith Boq / Financial Evaluation / Specificiations / Approved Brands Etc So As To Aid In Preparation Of Dpr And Conculsion Of Contracts In Near Future . Note : Areas Covered By Electrical Energy Audit ( I ) Complete Electrical Distribution Network ( Sld ) Showing Grid Sub Station With All Power Transformers And Distribution Transformers . ( Ii ) Complete Analysis Of Electrical Parameters I . E Voltage , Current , Frequency , Power Factor Etc . ( Iii ) Health Status Of All Electrical Measuring / Controlling And Tripping System Of Mrs . 2 . Details Of Electical Assets Is Attached As Appx A However The Firm Intersted To Bid For The Subject Work Is Expected To Clear The Aspects Regarding Total Assets Once Again From Ge Before Submitting The Bid And No Representation In This Regard At The Later Stage Will Be Entertained . 3 . The Energy Audit Will Be Deemed To Considered Completed On Successful Submission Of :- ( A ) Surevey Report To Include Specific Recommendations On Each Aspect As Bought Out Above Alongwith Boqs -05 Copies , Duly Recommended By Ge And Final Technical Check And Completion Certificate From Dcwe ( E / M ) . ( B ) Full Payment Against Same Will Be Released On Completion Of Job . ( C ) Total Time Period For Completion Of Job Is 30 Days From Issue Of Job Order . For Any Further Delay , Refer To Terms And Conditions Of The Subject Quotation Is Attached As Appx B .
Contract Date: Oct 03, 2019 Contract Value : ₹ 94,400
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
43.
Public Administrative Department #1420374 AOC
Tender For Installation Of Cameras And Purchase Of Other Related Equipment At Municipal Corporation Dewas Office And Corporation Buildings And Main Places , 4 Channel Network Video Recorder Hikvision/Cp Plus/Dahua/D-Linkup To 4 Channel Ip Camera Inputmax. Decoding Capability: 8 X 1080P@30Fps. Supports Adaptive Decodinginstastream/H.265/Smart H.264Plus/H.264/Mjpeg Codec Decodingsupports Mainstream Cameras Of Onvif And Rtsp Protocolssupport 4 Poe Portssupport 2 Sata Hdds Up To 10Tb Each, 2 Usb Portsvga/Hdmi Simultaneous Video Output, Maximum Resolution Of Hdmi Is 4Kai By Camera: Face Detection, Perimeter Protection, Ivs, People Counting, Heat Map, And Smd With Supply & Installation , 8 Channel Network Video Recorder Hikvision/Cp Plus/Dahua/D-Link8 Channel Up To 8Mp Resolution For Preview And Playback , Hdmi/Vga Simultaneous Video Outputh.265/H.264 Codec Decoding , Max 80Mbps Incoming Bandwidth , Support Ipc Upnp, 4Poe Portssupport Anr Technology To Enhance The Storage Reliability When The Network Break Down1 Sata Iii Port ,Up To 6Tb Capacity For Each Hdd , Rca , Support Onvif Oem No Logo.Support Upgrade Firmware With Supply & Installation , 16 Channel Network Video Recorder Hikvision/Cp Plus/Dahua/D-Link16 Channel Up To 8Mp Resolutionfor Preview And Playback , Hdmi/Vga Simultaneous Video Outputh.265/H.264 Codec Decoding , Max 80Mbps Incoming Bandwidth , Support Ipc Upnp, 4Poe Portssupport Anr Technology To Enhance The Storage Reliability When The Network Break Down1 Sata Iii Port ,Up To 6Tb Capacity For Each Hdd , Rca , Support Onvif Oem No Logo.Support Upgrade Firmware With Supply & Installation , 8 Channel Nvr (Network Video Recorder) Hikvision/Cp Plus/Dahua/D-Link: A Device That Records And Stores Video Footage From Ip Cameras Over A Network. Support Up To 8Ch@8Mp/ Decoding, Smart H.265+/Smart H.264+/H.265/H.264 Decodingup To 8Mp Resolution Preview And Playbackmax 80Mbps Incoming Bandwidthsupport 2 Sata Hdds Up To 10Tb Each, 2 Usb Ports(2.0)Hdmi / Vga Simultaneous Video Outputsupport Multi-Brand Network Camerasonvif Version 2.4 Conformance With Supply & Installation , 16-Port Gigabit Unmanaged Desktop Switch.1000Base-T Interface 16.Auto.Mdi/Mdix.Yes.Switching Capacity32gbps.Max. Packet Forwarding Rate 23.8 Mpps.Store& Forwarding Forwading Yes.Power Input Ac:100 ~ 240 V.Packet Buffer Size512kbytes.Fanfanless Comply With Rohs 6 Yes.Energy Efficiency Ethernet (Eee)Yes.Power Saving By Link Status Yes.Power Saving By Cable Length Yes.Mac Address Table Size.8,192.802.3X Flow Control Yes.Head-Of-Line (Hol) Blocking Prevention Yes.Jumbo Frame 10,000.Bytes.Surge/Lightning Protection (Ac Power Inet)1Kv.Surge/Lightning Protection (All Ethernet Ports).1Kv.Air Discharge 8Kv.Contact Discharge4kv , Ethernet Patch Cord Cat6 Lan Cable 3 Meter , Poe Switch 8 Port Gigabit Hikvision/Cp Plus/Dahua/D-Link8x10poe Switch (8 Poe Ports +2 Uplink), 802.3Af/At Poe+ 10+100+1000Mbps, 100W Built-In Power, Extend To 250Meter,Unmanaged Metal Plug And Play With Supply & Installation , Poe Switch 4 Port Gigabit Hikvision/Cp Plus/Dahua/D-Link 4X6 Poe Switch (4 Poe Ports +2 Uplink), 802.3Af/At Poe+ 10+100+1000Mbps, 100W Built-In Power, Extend To 250Meter,Unmanaged Metal Plug And Play With Supply & Installation , Poe Switch 16 Port Hikvision/Cp Plus/Dahua/D-Link16x18 Poe Switch (8 Poe Ports +2 Uplink), 802.3Af/At Poe+ 10+100+1000Mbps, 100W Built-In Power, Extend To 250Meter,Unmanaged Metal Plug And Play With 16X Gigabit Poe Rj45 Ports, Each Port Supports Max. 30W Poe Output, Whole Machine Reaches 120W Poe Power Output 1X Gigabite Sfp Port With Supply & Installation , Poe Switch 16 Port Gigabit Hikvision/Cp Plus/Dahua/D-Link16x18 Poe Switch (8 Poe Ports +2 Uplink), 802.3Af/At Poe+ 10+100+1000Mbps, 100W Built-In Power, Extend To 250Meter,Unmanaged Metal Plug And Play With 16X Gigabit Poe Rj45 Ports, Each Port Supports Max. 30W Poe Output, Whole Machine Reaches 120W Poe Power Output With Supply & Installation , 2 Mp Ip Camera Vandal Proof Dome Hikvision/Cp Plus/Dahua/D-Link Image Sensor 1/2.8” 2Mp Progressive Scan Cmos (0.9071 Cm) Minimum Illumination [email protected] Effective Pixels 1920(H) X 1080(V) Shutter Speed Auto/Manual 1/3 S–1/100000 S White Balance Auto/Natural/Street Lamp/Outdoor/Manual S/N Ratio >56Db Ram & Rom 128Mb & 128Mb Lens 3.6Mm Fixed Lens (2.8Mm Optional) Gain Control (Agc) Auto/Manual Video Compression H.265+/H.265/H.264+/H.264H/Mjpeg (Sub Stream) Angle Of View 3.6Mm- H: 87.0° V: 46.0° D: 104.0°, 2.8Mm- H: 106.0° V: 56.0° D: 126.0° Back Light Compensation Blc / Hlc / Wdr(120Db) Video Streaming Main Stream: 1080P(1 ~ 25/30Fps), Sub Stream: D1(1-25/30Fps) Resolution 1080P(1920×1080)/1.3M(1280×960)/ 720P(1280×720)/D1(704×576/704×480)/ Vga (640×480)/Cif(352×288/352×240) Digital Zoom 16X Motion Detection Off / On (4 Zone, Rectangle) Privacy Mask Off / On (4 Area, Rectangle) Icr Auto (Icr)/Color/B/W Roi Off / On (4 Zone) Bit Rate H.265: 12K ~ 6400Kbps, H.264: 32K ~ 10240Kbps Protocol Http; Tcp; Arp; Rtsp; Rtp; Udp; Rtcp; Smtp; Ftp; Dhcp; Dns; Ddns; Pppoe; Ipv4/V6; Qos; Upnp; Ntp; Rtmp; Multicast; Https; Sftp; 802.1X; Icmp; Igmp, Onvif (Profile S/Profile G); Genetec Smartdetection Tripwire, Intrusionota (Online Device Upgrade) Support Cloud Health Monitoring System (Hms) Support Ethernet Rj-45 (10/100Base-T) Event Trigger Motion Detection, Video Tampering, Scene Changing, Network Disconnection, Ip Address Conflict, Illegal Access, Storage Anomaly User Account 20 Users Ir Ir Range Of 30 Mtr. ,Smart Ir Smart Phone Iphone, Ipad, Android Phone Micro Sd Ftp; Micro Sd Card (256Gb); Nfs; Samba Storage Temperature -40°C To +60°C (-40°F To +140°F) Operating Temperature -40°C To +60°C (-40°F To +140°F) Humidity =95% Power Source Dc12v, Poe (802.3Af) Power Consumption With Supply & Installation , 6 Mp Ip Indoor Camera Hikvision/Cp Plus/Dahua/D-Linkhigh Quality Imaging With 6 Mp Resolutionefficient H.265+ Compression Technologyclear Imaging Against Strong Backlight Due To 130 Db Wdr Technologybuilt-In Microphone For Real-Time Audio Security(-U)24/7 Colorful Imaging Water And Dust Resistant (Ip66) Password Protection, Complicated Password, Https Encryption, Ip Address Filter, Security Audit Log, Basic And Digest Authentication For Http/Https, Tls 1.1/1.2, Wsse And Digest Authentication For Open Network Video Interfacecolor: 0.0005 Lux @ (F1.0, Agc On), 0 Lux With White Lightmain Stream 70 Hz: 30 Fps (3072×2048 2592X1520,2048X1536 1920 × 1080, 1280 × 720) With Supply & Installation , 6 Mp Ip Outdoor Camera Hikvision/Cp Plus/Dahua/D-Linkhigh Quality Imaging With 6 Mp Resolution, Efficient H.265+ Compression Technologyclear Imaging Against Strong Backlight Due To 130 Db Wdr Technologybuilt-In Microphone For Real-Time Audio Security(-U) , 24/7 Colorful Imagingwater And Dust Resistant (Ip66) Password Protection, Complicated Password, Https Encryption, Ip Address Filter,Security Audit Log, Basic And Digest ,Authentication For Http/Https, Tls 1.1/1.2, Wsse And Digest Authentication For Open Network Video Interfacecolor: 0.0005 Lux @ (F1.0, Agc On), 0 Lux With White Lightmain Stream 70 Hz: 30 Fps (3072×2048 2592X1520,2048X1536 1920 × 1080, 1280 × 720) With Supply & Installation , Bullet Camera 4Mp Hikvision/Cp Plus/Dahua/D-Link(2560 × 1440)@25/30Fps, And 4Mp (2688 × 1520)@20Fpsh.265+/ H.264+ Dual-Stream Encodingwdr(120Db), Day/Night (Icr), 3D-Dnr, Roi, Awb, Agc, Blc, Hlc3.6Mm Fixed Lens (2.8Mm Optional).Ir Range Of 30 Mtrs, Ip67, Poe. With Supply & Installation , Dom Camera 4Mp Wdr Ir Network Dome Camera Hikvision/Cp Plus/Dahua/D-Link- 30Mtr.1/3” 4Mp Ps Cmos Image Sensor (0.84667Cm)Max. 4Mp (2560 × 1440)@25/30Fps, And 4Mp (2688 × 1520)@20Fps.H.265+/ H.264+ Dual-Stream Ncodingwdr(120Db), Day/Night (Icr), 3D-Dnr, Roi, Awb, Agc, Blc, Hlc3.6Mm Fixed Lens (2.8Mm Optional)Ir Range Of 30 Mtrs, Ip67, Poe.Mobile Software: With Supply & Installation , 32 Channel Network Video Recorder Hikvision/Cp Plus/Dahua/D-Linkup To 32 Channel Ip Camera Input Up To 12Mp Resolution Preview And Playback Max 384Mbps Incoming Bandwidth Support 4 Sata Hdds Up To 10Tb Each,4 Usb Ports (2 Usb3.0), 1 Hdmi / 1 Vga Simultaneous Video Output Support Multi-Brand Network Cameras Support Raid 0/1/5/6/10 Onvif Version 2.4 Conformance With Supply & Installation , 4 Channel Network Video Recorderhikvision/Cp Plus/Dahua/D-Link4 Channel Up To 8Mp Resolution For Preview And Playback , Hdmi/Vga Simultaneous Video Output H.265/H.264 Codec Decoding , Max 80Mbps Incoming Bandwidth , Support Ipc Upnp, 4Poe Ports Support Anr Technology To Enhance The Storage Reliability When The Network Break Down 1 Sata Iii Port ,Up To 6Tb Capacity For Each Hdd , Rca , Support Onvif Oem No Logo.Support Upgrade Firmware With Supply & Installation , 32 Channel Network Video Recorderhikvision/Cp Plus/Dahua/D-Link32 Channel Ip Camera Inputultra H.265/ H.265/H.264 Video Formatssupport 4K Resolution Upto 12Mp Recording320 Mbps Incoming/ 320Mbps Outgoing Bandwidthsupport 2 Sata Hdds Up To 10Tb Each, 3 Usb Portssupport Multi-Brand Network Cameras With Supply & Installation , Media Convertor Hikvision/Cp Plus/Dahua/D-Link Single Mode Media Converter 10/100/1000Base-Tx Ethernet Twisted-Pair Signals To 100Base- Fx Fast Ethernet Fiber Signals. Maximum Fiber Cable Distance For Single-Mode Distance Is 30Kms Or 100Km And For Multi-Mode Distance Is 2Kms. With Supply & Installation , 6 Core Armored Fiber Optic Cable Hikvision/Cp Plus/Dahua/D-Link No. Of Cores 6 Core Cable Type Armoured, Diameter 6 Mm, Mode Type Single Mode,Jacket Material Hdpe Operating Temperature -40 Deg C To +70 Deg C,Storage Temperature -40 Deg C To +60 Deg C Bend Radius Short Term : 20D, Long Term : 10D With Supply & Installation , Cat 6 Outdoor Cable Hikvision/Cp Plus/Dahua/D-Link4 Pairs Foilded Twisted Pair (Ftp) Cable Conductor Metal: Solid Bare Copper With 23 Awg, Cable Type : Cat 6 Outdoor, Drain Wire : 26 Awg,Jacket Material : Double Sheath, Pvc Inner, Sheath : Uv Pvc Outer Sheath,Pe Central Cross Separator With Supply & Installation , 1 Tb Surveillance Internal Hard Drive 1Tb Hdd Is 3.5 Inch Hdd Interface With Sata 6Gb/S And 64 Cache (Mb). Image Perfect Firmware Supports 24×7 Surveillance-Optimized Workloads Tuned To Record About 90% Of The Time And Play Back Video Footage The Remaining 10%, And Supports More Cameras Recording At Higher Resolutions Than Traditional Drives Lower Power Consumption Means A Reduction In Heat Emissions, Which Improves Reliability In Surveillance Solutions. Tarnish-Resistant Components Helpprotect Drive From Environmental Elements, Increasing Field Reliability Best-Fit Applications Are Network Video Recorders (Nvr), Embedded Surveillance Dvrs (Sdvr), Hybrid Surveillance Dvrs, And Surveillance Dvrs With Supply & Installation , 2 Tb Surveillance Internal Hard Drive 2Tb Hdd Is 3.5 Inch Hdd Interface With Sata 6Gb/S And 64 Cache (Mb). Image Perfect Firmware Supports 24×7 Surveillance-Optimized Workloads Tuned To Record About 90% Of The Time And Play Back Video Footage The Remaining 10%, And Supports More Cameras Recording At Higher Resolutions Than Traditional Drives Lower Power Consumption Means A Reduction In Heat Emissions, Which Improves Reliability In Surveillance Solutions. Tarnish-Resistant Components Helpprotect Drive From Environmental Elements, Increasing Field Reliability Best-Fit Applications Are Network Video Recorders (Nvr), Embedded Surveillance Dvrs (Sdvr), Hybrid Surveillance Dvrs, And Surveillance Dvrs With Supply & Installation , Cat 6 Cable Hikvision/Cp Plus/Dahua/D-Link4-Pair Unshielded Twisted Pair (Utp) Cablepairs Are Braided In Aluminum Foil With Drain Wire23 Awg Solid Copper Conductor For Superior Conductivityhdpe Insulationfr Pvc Jacketverified Compliant With Eia/Tia Standards By Etlul-Listed With Supply & Installation , 4 Tb Surveillance Internal Hard Drive4tb Hdd Is 3.5 Inch Hdd Interface With Sata 6Gb/S And 64 Cache (Mb). Image Perfect Firmware Supports 24×7 Surveillance-Optimized Workloads Tuned To Record About 90% Of The Time And Play Back Video Footage The Remaining 10%, And Supports More Cameras Recording At Higher Resolutions Than Traditional Drives Lower Power Consumption Means A Reduction In Heat Emissions, Which Improves Reliability In Surveillance Solutions. Tarnish-Resistant Components Helpprotect Drive From Environmental Elements, Increasing Field Reliabilitybest-Fit Applications Are Network Video Recorders (Nvr), Embedded Surveillance Dvrs (Sdvr), Hybrid Surveillance Dvrs, And Surveillance Dvrs With Supply & Installation , Giga Switch 8 Port Hikvision/Cp Plus/Dahua/D-Link8 Port Gigabit Switch | Easy Smart Managed | Plug & Play | /Wall-Mount | Sturdy Metal W/Shielded Ports With Supply & Installation , Power Supply 8 Channel Hikvision/Cp Plus/Dahua/D-Link8ch Power Supplyinput Voltage: 180~264Vac,Output Voltage: 12V Dc,Current Range: 0~10A,Ripple & Noise (Max.): 100Mvp-P Rated Power: 120W,Voltage Adj. Range: 11.4~13.2V Voltage Tolerance: ±2.0%,Line Regulation: ±1.0% With Supply & Installation , Power Supply 16 Channel Hikvision/Cp Plus/Dahua/D-Link16 Ch Power Supplyinput Voltage: 180~264Vac,Output Voltage: 12V Dc,Current Range: 0~10A,Ripple & Noise (Max.): 100Mvp-P,Rated Power: 240W,Voltage Adj. Range: 11.4~13.2V,Voltage Tolerance: ±2.0%,Line Regulation: ±1.0% With Supply & Installation , Server Rack Hikvision/Cp Plus/Dahua/D-Link Dvr/Server/Network Cabinet Box/Rack For Cctv Dvr/Nvr/Poe Switch And Cctv Smps Smart Management With Power Socket Ideal For 4/8 Channel Cctv System With Supply & Installation , Hard Disk Storage Devices: 500 Gb Hard Disk Drives That Are Used To Store The Recorded Video Footage. With Supply & Installation , 4 Channel Dvr (Digital Video Recorder): Hikvision/Cp Plus/Dahua/D-Link A Device That Records Video Footage From The Cameras Auto Adaptive Hdcvi/Ahd/Tvi/Cvbs/Ip Signals:Supportupto 8Mp Ip Camera, Max 24Mbps Incoming Bandwidth: H.265Plus /H.265 Dual-Stream Video Compression, Hdmi / Vga Simultaneous Video Outputsupport 1 Sata Hdd Up To 10Tb, 2 Usb Ports(2.0) With Supply & Installation , 8 Channel Dvr (Digital Video Recorder): Hikvision/Cp Plus/Dahua/D-Link A Device That Records Video Footage From The Cameras Auto Adaptive Hdcvi/Ahd/Tvi/Cvbs/Ip Signals,Supportupto 8Mp Ip Camera Max 48Mbps Incoming Bandwidth,H.265+ /H.265 Dual-Stream Video Compression, Hdmi / Vga Simultaneous Video Output, Support 2 Sata Hdd Up To 10Tb Each, 2 Usb Ports. With Supply & Installation , 16 Channel Dvr (Digital Video Recorder): Hikvision/Cp Plus/Dahua/D-Link A Device That Records Video Footage From The Cameras Supports Hdcvi/Ahd/Tvi/Cvbs/Ip Video Inputs, Max 24 Channels Ip Camera Inputs, Each Channel Up To 4Mp , Max 96Mbps Incoming Bandwidth H.264+/H.264 Dual-Stream Video Compression Support 2 Sata Hdd Up To 8Tb Each, 2 Usb Ports Hdmi / Vga Simultaneous Video Output. With Supply & Installation , 32 Channel Dvr (Digital Video Recorder): Hikvision/Cp Plus/Dahua/D-Link A Device That Records Video Footage From The Cameras H.265/ H.264 Dual-Stream Video Compression, All Channel 1080N Non- Realtime Recordingsupport Ahd, Tvi,Cvi, Cvbs, Ip Video Input,Hdmi / Vga Simultaneous Video Output Support 2 Sata Hdd Up To 16Tb, 2 Usb2.0. With Supply & Installation , 2Mp Full Hd Ir Network Ip Bullet Camera Hikvision/Cp Plus/Dahua/D-Link - 30Mtr. 1/2.8” 2Mp Ps Cmos Image Sensor (0.9071 Cm)Max. 2Mp (1920 × 1080)@25/30Fps Instastream And Smart H.264+ Dual- Stream Encoding Dwdr, Day/Night (Icr), 3D-Dnr, Roi, Awb, Agc, Blc, Hlc 3.6Mm Fixed Lens (2.8Mm Optional) Ir Range Of 30 Mtrs, Ip67, Poe. With Supply & Installation , 2Mp Full Hd Ir Network Ip Dome Camera Hikvision/Cp Plus/Dahua/D-Link- 30Mtr. 1/2.8” 2Mp Ps Cmos Image Sensor (0.9071 Centimeters) Max. 2Mp (1920 × 1080) @25/30 Fps. Instastream And Smart H.264+ Dual-Stream Encoding. Dwdr, Day/Night (Icr), 3D-Dnr, Roi, Awb, Agc, Blc, Hlc. 3.6Mm Fixed Lens (2.8Mm Optional). Ir Range Of 30 Mtrs, Ip67, Poe. With Supply & Installation , 2 Mp Camera Hd Colour View Bullet Hikvision/Cp Plus/Dahua/D-Link True Wdr, 130Db, 20 M White Light Distance, Ã? Ip67 2 Megapixel High-Performance Cmos, Analog Hd Output1080p Resolution, Full Time Color, Osd Menu, 3D Dnr, Up The Coax(Hikvision-C), 4 In 1 Video Output (Switchable Tvi/Ahd/Cvi/Cvbs). With Supply & Installation , 2 Mp Camera Hd Dom Colour View Hikvision/Cp Plus/Dahua/D-Link True Wdr, 130Db, 20 M White Light Distance, Ã? Ip67 2 Megapixel High-Performance Cmos, Analog Hd Output1080p Resolution, Full Time Color, Osd Menu, 3D Dnr,Up The Coax(Hikvision-C), 4 In 1 Video Output (Switchable Tvi/Ahd/Cvi/Cvbs). With Supply & Installation , 4 Channel Camera Supply Hikvision/Cp Plus/Dahua/D-Link Compatible Devices Security Cameras Cctv Power Supply For 4 Channel (12V 5 Amp) Smps (Switch Mode Power Supply) With Voltage Booster Technology. With Supply & Installation , Ultra Microsd Uhs-I Card 64Gb, 120Mb/S Up To 120Mb/S Transfer Speeds Let You Move Up To 1000 Photos In A Minute [32Gb-1Tb] Load Apps Faster With A1-Rated Performance Class 10 For Full Hd Video Recording And Playback. With Supply & Installation , 3 +1 Cable Per Meter Cctv Cable 3+1 / Rg59 Coaxial Copper Coil D-Link/Hikvision/Cp Plus. With Supply & Installation , Bnc Connector Bnc Male Connector For Cctv Camera. With Supply & Installation , Dc Connector 12V Dc 5.5X2.1Mm Female Dc Power Socket Jack Connector Cable Plug Wire For Cctv Led, Light Etc. Female Dc Power Socket Jack Connector Cable Socket Wire. With Supply & Installation , Mic Cctv Pickup Audio Surveillance Microphone Mic For Cctv Systems. With Supply & Installation , Ptz Camera Camera Hikvision/Cp Plus/Dahua/D-Link Module 2Mp 15× Network Ir Speed Domeimage Sensor 1/2.8 Progressive Scan Cmos,Min. Illumination ,Color: 0.005 Lux @(F1.6, Agc On)B/W: 0.001 Lux @(F1.6, Agc On) , 0 Lux With Ir, White Balance Auto/Manual/Atw (Auto-Tracking White Balance)/Indoor/Outdoor/Fluorescent Lamp/Sodium Lamp,Agc Auto/Manual,Shutter Time 1/1 S To 1/30,000 S,Day& Night Ir Cut Filter,Digital Zoom 16× ,Privacy Mask 24 Programmable Privacy Masks, Focus Mode Auto/Semi-Automatic/Manualwdr 120Db:Lensfocal Length 5 Mm To 75 Mm, 15× Optical Zoom Speed Approx. 2.4 S (Optical Lens, Wide-Tele)Fov , Orizontal Field Of View: 53.8° To 4.0° (Wide- Tele),Vertical Field Of View: 31.9° To 2.3° (Wide-Tele)Diagonal Field Of View: 60.4° To 4.6°(Wide-Tele), Working Distance 10 Mm To 1500 Mm (Wide-Tele)Aperture Range F1.6 To F3.5,Ir,Ir Distance Up To 100 M,Ir Intensity Automatically Adjusted, Depending On The Zoom Ratio,Ptz:,Movement Range (Pan) 360° Endless,Pan Speed Configurable, From 0.1°/S To 80°/S Preset Speed: 80°/S,Movement Range (Tilt) From - 15° To 90° (Auto-Flip)Tilt Speed Configurable, From 0.1°/S To 80°/Spreset Speed: 80°/S,Proportional Zoom Supportpresets 300,Patrol Scan 8 Patrols, Up To 32 Presets For Each Patrol,Pattern Scan 4 Pattern Scans, Record Time Over 10 Minutes For Each Scan,Power-Off Memory Support,Park Action Preset/Pattern Scan/Patrol Scan/Auto Scan/Tilt Scan/Random Scan/Frame,Scan/Panorama Scan,Ptz Position Display Support, Preset Freezing Support,Scheduled Task Preset/Pattern Scan/Patrol Scan/Auto Scan/Tilt Scan/Random Scan/Frame,Scan/Panorama Scan/Dome Reboot/Dome Adjustcompression Standard,Videocompression,Main Stream: H.265+/H.265/H.264+/H.264,Sub-Stream: H.265/H.264/Mjpeg,Third Stream: H.265/H.264/Mjpeg,H.264 Type Baseline Profile/Main Profile/High Profile, H.264+ Support H.265 Type Main Profile ,H.265+ Support,Video Bitrate 32 Kbps To 16384 Kbps, Smart Feature,Basic Event Detection Motion Detection, Video Tampering Detection, Exception Detection, Smart Detection,Face Detection, Intrusion Detection, Line Crossing Detection, Region Entrance, Detection, Region Exiting Detection, Unattended Baggage Detection, Object Removal,Detection,Roi Encoding Main Stream, Sub-Stream And Third Stream Respectively Support Two Fixed Areas.,Image Max. Resolution 1920 × 1080 ,Main Stream: 50Hz: 25Fps (1920 × 1080, 1280 × 960, 1280 × 720),50Fps (1280 × 960, 1280 × 720),60Hz: 30Fps (1920 × 1080, 1280 × 960, 1280 × 720),60Fps (1280 × 960, 1280 × 720),Sub-Stream 50Hz: 25Fps (704 × 576, 640 × 480, 352 × 288),60Hz: 30Fps (704 × 480, 640 × 480, 352 × 240)Third Stream 50Hz: 25Fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 576, 640 × 480, 352 × 288)60Hz: 30Fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 480, 640 × 480, 352 × 240)Image Enhancement Hlc/Blc/3D Dnr/Defog/Eis/Regional Exposure/Regional Focus Svc Support:Networknetwork Storage Built-In Memory Card Slot, Support Micro Sd/Sdhc/Sdxc, Up To 256 Gb; Nas (Nps,Smb/ Cips), Anr Alarm Linkage Alarm Actions, Such As Memory Card Video Record, Trigger Recording, Notify Surveillance Center, Upload To Ftp/Memory Card/Nas, Send Email, Etc.Protocols Ipv4/Ipv6, Http, Https, 802.1X, Qos, Ftp, Smtp, Upnp, Snmp, Dns, Ddns, Ntp, Rtsp,Rtcp, Rtp, Tcp/Ip, Udp, Igmp, Icmp, Dhcp, Pppoe, Bonjour Api Open-Ended, Support Onvif, Isapi, And Cgi, Support Hikvision Sdk And Third-Party Management Platform Simultaneous Live View Up To 20 Channels User/Host Up To 32 Users. 3 Levels: Administrator, Operator And Usersecurity Measures User Authentication (Id And Pw), Host Authentication (Mac Address); Httpsencryption; Ieee 802.1X Port-Based Network Access Control; Ip Address Filteringclient Ivms-4200, Ivms-4500, Ivms-5200, Hik-Connect Web Browser Ie 8+, Firefox 30+, Safari 8.0+ Web Browser Interface: Network Interface 1 Rj45 10 M/100 M Ethernet Interface; Poe+ (802.3At, Class4) General: Power 12 Vdc And Poe+ (802.3At, Class4), Max.: 18 W (Ir Light 6 W Max.)Working Environment Working Temperature: -30°C To 65°C (-22°F To 149°F) With Supply & Installation , Led Tv Monitor: 32 Inch A Display Device To View The Live Footage And Play Back The Recorded Videos. Android Yes, Patchwall, Netflix, Prime Video, Live Tv, Youtube, Youtube Music, Google Play Movies, Gallery, Help, Media Player, Miracast, Google Play Games, Play Store, Tv Manager. With Supply & Installation , Led Tv Monitor: 40 Inch A Display Device To View The Live Footage And Play Back The Recorded Videos. Android Yes, Patchwall, Netflix, Prime Video, Live Tv, Youtube, Youtube Music, Google Play Movies, Gallery, Help, Media Player, Miracast, Google Play Games, Play Store, Tv Manager. With Supply & Installation , Wireless-N300 Mbps Single_Band Easy Setup Router With 2 Antennas ( Not A Modem) Cable Broadbands;Input Type Rj-45 (Ethernet Cable) Supported By Neighbourhood Cable Broadband Isps Such As Hathway, Act, Tikona, Airtel Fibrenet, Myworld, Nextra, Siti Cable, You Broadband, Spectranetetc Input Type Rj-45 (Ethernet Cable) Supported By Neighbourhood Cable Broadband Isps Such As Hathway, Act, Tikona, Airtel Fibrenet, Myworld, Nextra, Siti Cable, You Broadband, Spectranetetc.;This Router Does Not Include Modem And Works Well With Cable Broadbands. With Supply & Installation , 300Mbps Wireless Single Band Router With 3 External Antennas 3 5Dbi External Antennas Boost Wifi To Each Corner Of Your House, You Can Enjoy Entire-Home Wifi Coverage And Lag Wifi Performance Ip Based Bandwidth Control Allows Administrators To Determine How Much Bandwidth Is Allotted To Each Pc Supports Wpa, Wpa2, Wpa-Psk Wpa2-Psk Security Mechanism To Enhance Security Level Easy Setup Interface Makes You Can Enjoy Wifi Experience Effortlessly, F3 Makes You Enjoy A Easy And Wheeling E- Life;Control Method: Application;Security Protocol: Wpa-Pskwpa2-Psk Operating System: Windows. With Supply & Installation , Ac1200 Mbps 4G+ Cat6 Mobile Wi-Fi Router Dual Band Wireless Wifi, 4G/3G Network Sim Slot Unlocked, No Configuration Required, Support Guest Network & Parental Control, Dual Band. With Supply & Installation , 4G Wifi Sim Card Supported Router With Lan Port Control Method: Application; Operating System: Routeros; Security Protocol: Wpa2-Psk 4G Sim Card Supported Wifi Router With Lan Port Security Protocol: Wpa2-Psk; Control Method: Application; Operating System: Routeros. With Supply & Installation , Camera Pvc Box Pvc Junction Box For Cctv Camera Mounting 4X4. With Supply & Installation , Bullet Camera Stand 360 Degree Cctv Camera Pole Bracket Hoop Mounting Bullet Camera Stand Bracket. With Supply & Installation , Motorized Camera Stand Item Data Horizontal Rotate Angle 255 Degrees Rotate Speed 6/ 12/ 20 Degrees Optional Limited Position Left & Right Limited Position, Free Adjustable Limited Position Auto Scan 3 Level Adjustable Preset Position 8 Preset Position Preset Position Route 1 Tour Route, 3 Level Of Rotate Speed Fixed Monitoring Position Yes Manual Homing Feature Yes Control Wire Rs485 Interface Power Interface + Rs485 Power Input Dc 12V+-5% / 100Ma Power Consumption 0.9W Work Environment -25-55 Degrees. With Supply & Installation , 5 Port Network Switch Hikvision/Cp Plus/Dahua/D-Link 1000Base-T Interface:5,Auto Mdi/Mdix:Yes,Switching Capacity 10 Gbps Max. Packet Forwarding Rate7.44 Mpps, Store & Forwarding Forwading: Yes, Dimension 91 X 73 X 22 Mm:,Weight:0.08 Kgs, Operation Temperature: 0 ~ 40 °C, Storage Temperature,- 10 ~ 70 °Coperation Humidity:0% ~ 95% Rh,Storage Humidity 0% ~ 95% Rh ,Operating Altitude2000m Maximum Power Consumption 3.90 W,Standby Power Consumption 0.6W Maximum Heat Dissipation 13.299 Btu/H, Mtbf 1,152,221 Hours, Power Input Ac:100 ~ 240 Vflash Memory Size 64Kbytes Packet Buffer Size 128Kbytes, Fan Fanless Comply With Rohs 6,Yesenergy Efficiency Ethernet (Eee):Yes, Power Saving By Link Status:Yes, Power Saving By Cable Length Yes,Mac Address Table Size4k, 802.3X Flow Controlyes,Head-Of- Line (Hol) Blocking Prevention Yes, Jumbo Frame9,720 Bytes, Surge/Lightning Protection (Ac Power Inet) 1Kv, Surge/Lightning Protection (All Ethernet Ports) 1Kv Air Discharge 8Kv. With Supply & Installation , Network Switch 24-Port 10/100 Hikvision/Cp Plus/Dahua/D-Link Unmanaged Desktop Or Rackmount Switch Fast Ethernet Unmanaged Desktop Switch Is Designed To Enhance Workgroup Performance While Providing A High Level Of Flexibility. Powerful Yet Easy To Use, This Device Allows Users To Simply Plug Any Port To Either A 10Mbps Or 100Mbps Network To Multiply Bandwidths, Boost Response Time And Satisfy Heavy Load Demands. With Supply & Installation , Dual Band Router Hikvision/Cp Plus/Dahua/D-Link 2.4, 5 Ghz 802.11Ac Wave2 Wifi —— 867 Mbps On The 5 Ghz Band And 400 Mbps On The 2.4 Ghz Band;Boostedwifi Coverage —— 4 Antennas Provide Stable Wireless Connections And Optimal Coverage Mu-Mimo —— Easy Network Management 2X Efficiency By Communicating With Up To 2 Devices At Once; Beamforming — Beamforming Technology Delivers A Highly Efficient Wireless Connection Ap Mode —— Supports Access Point Mode To Create A New Wifi Access Point; Intelligent Connection —— Smart Connect Directs Clients To The Less Congested Band And Airtime Fairness Optimizes The Time Usageeasy Setup —— Easy Network Management Security Protocol: Wpa, Wpa2, Wpa3, Wpa/Wpa2-Enterprise (802.1X). With Supply & Installation , Cctv Camera Direct Pole Mounting Stand/Bracket With Steel Looping Ring With 200 Mm Diameter. With Supply & Installation , 90° Viewing Area Security Camera Stand. With Supply & Installation , Bracket : Pole Mount Camera Loop Bracket For Cctv Security Camera Indoor Outdoor Universal Compatible. With Supply & Installation , Pvc Dvr/Server | Network Cabinet Box | Rack For Cctv Dvr/Nvr/Poe Switch And Cctv Smps Smart Management With Power Socket Ideal For 4/8 Channel Cctv System For Both Indoor And Outdoor Purpose. With Supply & Installation , 12V 5Amp Dc Adaptor Power Supply For Cctv Cameras And For Multiple Devices Required 12V Power Supply. With Supply & Installation , Outdoor Cctv Security Waterproof Bullet Camera Enclosure 6 Metal With Locking System. With Supply & Installation , 4 Channel Passive Video Balun Transceiver, Bnc To Cat5/5E/6 Rj45(T568b) Utp Cable Converter For Cctv Surveillance Camera System. With Supply & Installation , 3U Rack Hikvision/Cp Plus/Dahua/D-Link With 3-4 Power Socket And Lock 3U Rack - Dvr Rack/Cctv Rack/Server Rack/Nvr Rack/Network Rack With 3 Power Plug Socket - Transparent Glass Door - 1 Tier/Shelf - Wall Mount - Metal Cabinet Box (40Cm X 40Cm X 20Cm). With Supply & Installation , 4U Rack With 3-4 Power Socket Cooling Fan And Lock Rack Standard : Conforms To Din 41494 Or Equivalent Standard Construction : Welded Front Door : Lockable Toughened Glass Door Basic Frame : Steel Equipment Mounting : Din Standard Slots Mounting Angle : 19” Mounting Angles Made Of Formed Steel Standard Finish : Powder Coated Top And Bottom Cover : Welded To Frame, Vented And Field Cable Entry Exit Cut Outs Standard Color : Grey Static . With Supply & Installation , Wirless Router Wireless-N300 Mbps Single_Band Easy Setup Router Processor Count:4 ,Graphics Card Interface:Integrated, Connectivity Type:3G,Wireless Type:802.11N, 802.11B, 802.11G, Number Of Ethernet Ports: 4, Wattage: 5 Watts, Operating System:Windows, Android, Are Batteries Included: No, Included Components:Wireless N300 Easy Setup Router, N301 Quick Installation Guide, Ethernet Cable, Power Adapter And Resources Cd. With Supply & Installation , Ptz Camera 23X Hikvision/Cp Plus/Dahua/D-Link Ae Line Turbo Hd Ptz Hd1080p Turbo Ir Ptz Dome Camera, 2.54Cm Hd Progressive Scan Cmos, 1280X720/1920X1080 ,23X Optical Zoom, Dwdr: Up To 100M, Ir Distance: 3D Intelligent Positioning Function ,Support Turbo Hd And Cvbs Output. With Supply & Installation , 3 + 1 Coaxial Cable.100% Solid Copper Cable Includes Video, Audio And Power Cable Outdoor Cable D- Link/Finolex/Rr. With Supply & Installation , 128 Gb Microsdxc Class 10 130 Mb/S Memory Card (With Adapter). With Supply & Installation , 12V 1.5A Dc Power Adapter, Smps For Lcd Monitor, Tv, Led Strip, Cctv, 12 Volt 1.5A Power Adapter, Ac Input 100-240V Dc Output 12 Volt 1.5 A - 2.5Mm X 5.5Mm Jack. With Supply & Installation , 0.5 Mm 2 Pair Pvc Un Armored Telephone Cable D-Link/Finolex /Rr/Havells. With Supply & Installation , 20 Pair Krone Box With Supply & Installation , 50 Pair Krone Box With Supply & Installation , Epabx System 308 For 3 P&T Line-In And 8 Extensions Intercommunication Between All 8 Extensions Led Display. (Panasonic/ Crystal/ Matrix). With Supply & Installation , Epabx System 104 Cli (With Ps) Cli Available On All Instrument 1 Trunk 4 Extension. (Panasonic/ Crystal/ Matrix). With Supply & Installation , Epabx System 2 Trunk 18 Extension Expandable Up To 24 Port ) Panasonic/ Crystal/ Matrix. With Supply & Installation , Telephone Instrument (Basic Phone). With Supply & Installation , Telephone Instrument (Caller Id Wired Phone ). With Supply & Installation , Single Core Fiber Optic Drop Cable With Double Jacket With Supply & Installation , 4 Core Fiber Optic Drop Cable With Double Jacket. With Supply & Installation , 10 Meter Sc-Sc Single Mode Fiber Optic Patch Cable Fiber Cables Sc To Sc Sc Optical Connector. With Supply & Installation , Fiber Optical Cable 3 M Single Mode Duplex Sc-Sc Optic Fiber Patch Cord Optical - 3M | 9 Feet - (Compatible With Networking, Office, Computers). With Supply & Installation , 10/100Base-Tx To 100Base-Fx Media Converter .Product Features:1.Built-In High-Performance Kernel, Broadcast Storm Control, Flow Control, Crc Error Checking. 2.100Base-Fx Fiber-Optic Transmission Standard, Can Be Interconnected With Other Products 3.Support Ieee802.1D Function 4.Completely Compatible With Ieee802.3/802.3U Auto-Negotiation Function 5.Maximum Transmission Distance Up To 80Km 6.Optional Function: Lightning Protected, Up To 4000V;7.Optional Function: Poe Supported (Pse), Only Stand Alone;. With Supply & Installation , Fiber Optic Joint Box ( 2 Hole ) Termination Enclosure Box Ofc Splicing Tray. With Supply & Installation , Ethernet Patch Cord Cat6 Lan Cable 1.5 Meter , Ethernet Patch Cord Cat6 Lan Cable 5 Meter
Contract Date: Jul 07, 2023 Contract Value : ₹ 2.89 Lakh
Local Bodies No of Bidders 2
Madhya Pradesh View Result →
44.
Educational and Research Institute #1365810 AOC
Supply Design Books Supply Design Books For Ksid Library , Cute Little Quilts , Pattern Euphoria: New Designs For Home Interiors And Fashion , Felt To Stitch : Creative Felting For Textile Artists , Heat Economy In Textile Mills , The Textile Artist: Layered Cloth : The Art Of Fabric Manipulation , Peonies : Beautiful Varieties For Home And Garden , Dowries From Kutch , Handbook Of Textile Fibres: Man-Made Fibres ( Woodhead Publishing Textiles ) (5Th Ed.) , Quality Characterisation Of Apparel Second Edition (Hardcover) , Theory Of Structure And Mechanics Of Yarns (Woodhead Publishing India In Textiles) (Hardcover) , Automation In Garment Manufacturing ( Textile Institute Book ) , The Leatherworking Handbook: A Practical Illustrated Sourcebook Of Techniques And Projects , The Warp: A Weaving Reference , Indian Tie-Dyed Fabrics , Fabric Reference 04Th Edition , Introductory Textile Science , 121 Multipurpose Motifs , Leather Apparel Design , Technology Of Textile Processing , Text Book Of Footwear , Indian Embroidery , Batik: Fabled Cloth Of Java , Dyeing And Chemical Technology Of Textile Fibres 04Th Edt , Readers Digest Complete Guide To Needle Work , Picture Perfect Knits: Step-By-Step Intarsia With More Than 75 Inspiring Patterns , Innova Indian Ethnic Design , The Sewing Book , Understanding Textile For A Merchandiser , Batik , The Wallpaper Book , Rugs And Carpets From The Dildarian Collection And Various Owners (Sothebys Auction , Indian Embroidery , Creation Through Shapes & Patterns , A Handbook Of Indigo Dyeing , Flower Art & History Japanese Book , Edo Chiyagami , The Constance Howard Book Of Stitches (Batsford Classic Embroidery) , Technical Manual 2018 Vol No 93 Aatcc , Russian Textiles: Printed Cloth For The Bazaars Of Central Asia , Silk And Cotton: Textiles From The Central Asia That Was , Gothic Pop Textures , Studio Design Patterns For The 21St Century , Clan & Tartans French Edt , Simply Stylish Faux Flowers , Contemporary Stained Glass Artists: A Selection Of Artists Worldwide , Fingerweaving Basics , A Handbook Of Weaves: 1875 Illustrations (Revised) , Fusing Technology , Clothing Constructions , Textile Properties And Behaviour In Clothing Use , Cast On, Bind Off: 54 Step-By-Step Methods , Junior Pop Textures , Digital Textile Design, Second Edition , Textile Tectonics - Research And Design , Cachemires Parisiens, 1810-1880 , Flowers By Design , Saraca Vision , Inkle Loom Weaving , Sarasa Moyol , Shu Embroidery , Decora Ornamental Motifs Of The World , Clans And Tartans Of Scotland , Millers Samplers: How To Compare & Value , Tartans: Macnichol To Yukon , Les Peintres Du Silence , Motivate Seriestextiles , Textile Tradition Of Assam An Empirical Study. , The Warp & The Weft: Community And Gender Identity Among Banaras Weavers , Indian Painted & Printed Fabrics: Volume1 , Shibori: A Beginners Guide To Creating Color And Texture On Fabric (Diy Network) (Hardcover) , Court And Conquest , Botanical Colour At Your Fingertips , Automotive Textiles. Warrendale: Society Of Automotive Engineers, Inc. , Tone Fink (Stoff--Art) , Foulards: A Picture Book Of Prints For Mens Wear , Les Tissus De Provence , Johannes Spehr: Windeinschlag (Hardcover) , Olga De Amaral: To Weave A Rock , Fabric Sculpture , Decorative Arts From The Middle Ages To The Renaissance , Textile Fabrics And Their Selection 08Th Edition , Smocking With A Difference. Melbourne , Gingham Aprons Of The 40S & 50S: A Checkered Past , Dhurries: History, Technique, Pattern, Identification , Carpets For The Home , Crafts Of Gujarat (Living Traditions Of India) , Kantha , Traditions Of Textile Printing In Kutch Ajrakh And Related Techniques , Tablet Weaving , Designing For Printed Textiles A Guide To Studio And Free-Lance Workgoogle Booksillustrate , Ergonomics In The Garment Industry , Bioprocessing Of Textiles: Fundamentals For Applications , Energy Consevation In Textile Industry , Living With Kilims , Seven Thousand Years Of Chinese Silk Technology And Art: Treasures Of Ancient Embroidery , Weaving Chinas Past: The Amy S. Clague Collection Of Chinese Textiles , Japanese Family Crest Encyclopedia , 5000 Design And Motifs From India , Apparel Manufacturing Handbook: Analysis, Principles And Practice , Textiles Of India , Stitch, Fibre, Metal & Mixed Media : Inspiration, Projects & Techniques For Textile Artists , Spun Yarn Technology , Super Special Background Patterns 4 , Super Special Background Patterns 2 , Super Special Background Patterns 7 , Learning To Weave , Complete Guide To Embroidery Stitches: Photographs, Diagrams, And Instructions For Over 260 Stitches (Readers Digest) (Hardcover) , Impressions A Classic Collection Of Indian Textile Designs , Fragrance : An Innovative Collection Of Indian Textile Designs , Ethnic Embroidery Of India Vol 2 , Designs For A Lifetime , 1970S Patterns Gift & Creative Papers: Volume 54 , The Complete Guide To Designing And Printing Fabric , Embroidered Parsi Textiles , Sarasa Of The World , Creative Work With Textiles, , The Master Weavers , Principles Of Woven Fabric Manufacturing , World Dress: Illustrative Guide To The Folk Costume Of The World , Fabric Glossary , Textile Chemistry , Intelligent Textiles For Personal Protection And Safety , Textile Design In The Digital Age , Textile Arts Of India Kyoto Hatnka Collection , Color Index Vol: 04 ( Second Edt) , Color Index Vol: 02 Third Edition , Color Index Vol: 05 Third Edition , African Lace-Bark In The Caribbean: The Construction Of Race, Class And Gender , Chinese Costume And Accessories: 17Th-20Th Century (Portfolio Aedta) , Shibori For Textile Artists (Paperback) , Textile And Weaving Structures : A Source Book For Makers And Designers , Textile Folk Art , Modern Pattern + Cd Rom , Tilings And Patterns: Second Edition ( Dover Books On Mathematics ) , Textiles: Concepts And Principles , The Fundamentals Of Printed Textile Design , The World Of The Banaras Weaver , Knotted Threads: A Cultural Exchange With India , Classic Patterns (Book & Cd Rom) , Neisha Crosland: Life Of A Pattern , Cutting-Edge Surface Patterns & Palettes , Embroidery + Cd Rom , Lace + Dvd , The Aesthetics & Vocabulary Of Nakshi Kantha : Bangladesh National Museum Collection. 101 Pages Bangladesh. 1997 , A-Z Of Embroidery Stitches , Creative Batik , Textile Advances In The Automotive Industry ( Woodhead Publishing Textiles ) , The Technology Of Shortstaple Spinning , Traditional Textiles Of Cambodia: Cultural Threads And Material Heritage (Hardcover) , Liberty Style Textures Vol: 1 , Kinetic Art Textures Vol: 1 , Natural Pop Textures Vol: 1 , Grunge Textures Vol: 1 , Ethno Pop Textures Black Edition , The Techniques Of Tablet Weaving , Kyoto-Style Japanese-Style Illustrations (Kyoto Shoin Arts Collection) (Paperback Bunko) , Chrysanthemum / Autumn Leaves-Japanese Text Like Illustrations (Kyoto Shoin Arts Collection) , Kyoto Wind-Japanese Text Illustration Collection (Kyoto Shoin Arts Collection) , Flower Dance (Kyoto Shoin Arts Collection-One-Stroke Writing Paper (124)) , The Techniques Of Indian Embroidery (Paperback) , Colour For Textiles: A Users Handbook , Fundamentals And Advances In Knitting Technology (Woodhead Publishing India In Textiles) (Hardcover) , Engineering Comfort For Knits: Optimizing Physiothermal Comfort , Mechanical Properties Of Textile Fibres , Physical Methods Of Investigation Of Textiles , Cult Media, Fandom, And Textiles: Handicrafting As Fan Art , The Handbook Of Textile Culture , Textile Pedia , Japan Jade-Japan Blue (Kyoto Shoin Arts Collection) , Kyotos Moon-Japanese Text-Like Illustration Collection (Kyoto Shoin Arts Collection) (Paperback Bunko) , Shinchi Change (Kyoto Shogo Arts Collection) , Indian Miniature Painting , Welcome To Kagoshima Arts Collection (Kyoto Shogo Arts Collection) , The Head Of Kagami Kami (Kyoto Shoguns Arts Collection) , Chiyogami (Kyoto Shogo Arts Collection) , Japanese Bunsetsu-Ku Birds Of Kyoto (Kyoto Shoin Arts Collection-Design (104)) (Paperback Bunko) , Japanese Pattern Illustration Collection Sakura (Kyoto Shoin Arts Collection) (Paperback Bunko) , Kyo Denshi Paper By Yuzen Technique (Kyoto Shogo Arts Collection) , Cloth That Changed The World: The Art And Fashion Of Indian Chintz , Color Code: Graphic Design, Branding And Identity , Materialising Colour : Journeys With Giulio Ridolfo , Colour Physics For Industry. , The Pantone Fashion Sketchpad , The Color Star , The Little Book Of Colour : How To Use The Psychology Of Colour To Transform Your Life , Colour Provenance The Recipe Book , Designers Guide To Color 1 , Designers Guide To Color 2 , Designers Guide To Color 3 , Designers Guide To Color 4 , Designers Guide To Color 5 , Colour Art & Empire: Visual Culture And The Nomadism Of Representation , Color By Design: Paint And Print With Dye Second Edition , True Color System. Offset Plana Iii , Color Manual For Artist , The Enjoyment And Use Of Colour , Fashion In Film:Men , The Anatomy Of Fashion: Dressing The Body From The Renaissance To Today , Visual Merchandising And Display: Best Practices For Window Displays And Store Designs , Fabulous Frocks : A Celebration Of Dress Design , Mending And Alterations Made Simple: A Complete Guide To Clothes Repair , 20Th-Century Fashion Illustration: The Feminine Ideal (Dover Fashion And Costumes) , Marketing: Theory, Evidence, Practice , Case Studies In Merchandising Apparel And Soft Goods (Paperback) , Apparel Merchandisers’ Performance & Supply Chain Competitiveness (Paperback) , Critical Fashion Practice: From Westwood To Van Beirendonck , Retail Advertising And Promotion , Radical Decadence: Excess In Contemporary Feminist Textiles And Craft , Identities Through Fashion: A Multidisciplinary Approach , Fashion Theory: A Reader , Fashion Design For Living , Fashion Exposed: Graphics, Promotion And Advertising , Dress Up: New Fashion Boutique Design , Fashioning Memory: Vintage Style And Youth Culture , Fashion Illustration: Basic Techniques , Grading For The Fashion Industry: The Theory And Practice , Visual Design In Dress 03Rd Edt , Materials Management In Clothing Production , The Essential Shirt Work Book , The Party Dress , Stylist The Interpreters Of Fashion , Cooklins Garment Technology For Fashion Designers, 2Nd Ed , Dress Fitting 2/E , Fashion Source Book, 2Nd Ed , Fundamentals Of Mens Fashion Design: A Guide To Tailored Clothes , Auguste Racinet: Costume History , Fashion Rendering , Fashion. A World Of Similarities And Difference , An Illustrated History Of Fashion: 500 Years Of Fashion Illustration (Hardcover) , Fashion And Textiles: An Overview , Fashion Design , America Colleges , Fashion Buying , The Bra-Makers Manual , Uplift: The Bra In America , Changing Styles In Fashion: Who, What, Why , Jean Therapy , The Illustrated Encyclopedia Of Costume And Fashion, 1550-1920 , Hollywood Costume Design , Teach Yourself Visually Fashion Sewing , Costume: A Volume For The London Olympics , Fashion Cultures Revisited , The New Complete Guide To Sewing: Step-By-Step Techniquest For Making Clothes And Home Accessoriesupdated Edition. , Drawing On The Artist Within , Couture: The Art Of Fine Sewing , The Supermodern Wardrobe , Celebrity Culture : Second Edition , Singer Sewing 101 Secrets , Paris Haute Couture , Blood In Blood Out , Encyclopedia Of National Dress [2 Volumes]: Traditional Clothing Around The World , Rei Kawakubo/Comme Des Garçons: Art Of The In-Between , Channel: The Impossible Collection , The Little Black Dress , The Art Of Manipulating Fabric , History Of World Costume And Fashion , Fashion Marketing , Creating With Shapes , Costume & Fashion , Chic Chicago , Fashion Design: Process, Innovation And Practice , A Slaves Place, A Masters World: Fashioning Dependency In Rural Brazil , Fashioning Fashion: European Dress In Detail, 1700 - 1915 , Dressed To Kill: Jazz Age Fashion From Virginias , Ethnic Dress : A Comprehensive Guide To The Folk Costume Of The World , Hollywood And History: Costume Design In Film London: Thames & Hudson , India By Design , Backstage: Mercedes-Benz Fashion Week Berlin , Yves Saint Laurent: Icons Of Fashion Design , Vivienne Westwood Shoes , Ralph Rucci: The Art Of Weightlessness , W: The First 40 Years , Alexander Mcqueen: Savage Beauty , Support And Seduction: The History Of Corsets And Bras , Fashion Buying And Merchandising , Managing Fashion , Labor And Creativity In New York’S Global Fashion Industry , Storytelling In Luxury Fashion , Fashion , Communicating Fashion Brands , Draping For Apparel Design , Printed Matter In Fashion , Designing Patterns - A Fresh Approach To Pattern Cutting , Fashion Face-Off Cards , Apparel Machinery And Equipments , Apparel Merchandising , Air Traffic Control , From A To Biba: The Autobiography Of Barbara Hulanicki , Fashion , Dior: Moments Of Joy , Lingerie And Beachwear: 1,000 Fashion Designs , Fashion Uk , Fairway: The Golf Jacket , Cuba Libre: Elegance Under The Sun , Majorelle: Mens Fashion And Garden Fashion , Telemark , Franz Ferdinand: The Tracht , After Dark: When Men Behave Their Worst Yet Look Their Best , Clothing Technology , Love Looks Not With The Eyes , Joke Robaard: Folders, Suits, Pockets, Files, Stocks , Opening Ceremony: Est. 2002 , Wear Me: Fashion And Graphics Interaction , Stays And Corsets: Historical Patterns Translated For The Modern Body (Paperback) , Fashion Apparel, Accessories & Home Furnishings , Foamsmith: How To Create Foam Armour Costume , Sewing Lingerie , How To Draw Fashion Flats: A Practical Guide To Fashion Technical Drawing (Pencil And Marker Techniques) (Fashion Croquis) (Volume 2) , Luxury Essentials: Essential Insights And Strategies To Manage Luxury Product , 20 Years Of Style , How Fashion Works , Fabric, Form And Flat Pattern Cutting , Fashion Buying , Advanced Fashion Sketch Book , Culture To Catwalk: How World Cultures Influence Fashion , Making Trousers For Men & Women , The World Of Fashion 5Th Edition , Fashion Illustration Today , Haute Couture Embroidery: The Art Of Lesage (Hardcover) , Accessory Design , Fashion Design And Product Development , Introduction To Clothing Production Management , The Empire Of Fashion: Dressing Modern Democracy ( New French Thought ) , Fear And Fashion In The Cold War , Putting The Luxe Back In Luxury: How New Consumer Values Are Redefining The Way We Market Luxury , Vintage Fashion Accessories , Carr And Lathams Technology Of Clothing Manufacture , Fashion Tribes China , Fashion Embroidery: Embroidery Techniques And Inspiration For Haute-Couture Clothing (Hardcover) , African-Print Fashion Now!: A Story Of Taste, Globalization, And Style (Fowler Museum Textile) (Paperback) , Unexpected Pucci: Interiors: Furniture, Ceramics And Art Pieces , Marcel Rochas: Designing French Glamour , Paris: Fashion Flair , Super Heroes: Fashion And Fantasy , Principles Of Flat Pattern Design 04Th Edt , Illustrating Fashion , Metric Pattern Cutting For Menswear , The Latin American Fashion Reader , Porn Chic , The Cutting Edge: 50 Years Of British Fashion, 1947-1997, V&A, 1997 , Fashion Illustration: Inspiration And Technique , Fashion Illustration And Design: Accesories , Fashion Futures , Fashion Drawing Course: From Human Figure To Fashion Illustration , Viktor & Rolf: Fashion Artists 25 Years , Champagne Supernovas: Kate Moss, Marc Jacobs, Alexander Mcqueen, And The 90S Renegades Who Remade Fashion , Illustrating Fashion Concept To Creation 4Th Edition , The Culture Of Fashion : A New History Of Fashionable Dress , Contemporary Muslim Fashion , Figure Drawing For Fashion Design , Evaluating Apparel Quality, Second Edition , Todays Custom Tailoring , Dress Pattern Designing: The Basic Principles Of Cut And Fit,Classic Ed , Costume Of Ancient Egypt , Luxury Online Style Systems & Strategies , The Actor In Costume , Sewing For Style: Details & Techniques Beyond The Basics, The Singer Reference Library , Fashion Design Drawing And Presentation , The Complete Handbook Of Athletic Footwear , Family Clothing , Costume Of Ancient Rome , Creative Clothing Construction , Markets In Fashion: A Phenomenological Approach , Hello, My Name Is Paul Smith: Fashion And Other Stories , Fashion Advertising And Promotion , Routledge Handbook Of Sustainability And Fashion , The Magic Of Fashion , New Business Models For Sustainable Fashion , Fashion In Focus , Fashion, Design And Events , Pattern Magic 2 , Patternmaking: A Comprehensive Reference For Fashion Design , Kylie , Berlin Fashion , Diy Style: Fashion, Music And Global Digital Cultures , Costing For The Fashion Industry , Versace , Made In Italy: Rethinking A Century Of Italian Design , A Practical Guide To Visual Merchandising. Englewood Cliffs, N.J., , Basics Fashion Design 06: Knitwear , Key Concepts For The Fashion Industry , Dressing The Elite: Clothes In Early Modern England , The Black Dress , The 19Th Century Volume 7 (History Of Fashion & Costume) (Hardcover) , Doing Research In Fashion And Dress: An Introduction To Qualitative Methods , Masterclass: Fashion Design: Guide To The Worlds Leading Schools , Merchandise Buying And Management , Fashion Forecasting , Aware: Art Fashion Identity , Apparel Concepts & Practical Applications , Wear Your Chair When Fashion Meets Interior Design , Style Yourself With Confidence: Styling Tips And Techniques For Each Body Shape , Draping Period Costumes: Classical Greek To Victorian , Fashion A Marketing Approach , Becoming A Fashion Designer , Quality Assurance For Textiles And Apparel , Fashions Of A Decade 1920S , The Dressmakers Handbook Of Couture Sewing Techniques: Essential Step-By-Step Techniques For Professional Results , Apparel Merchandising: The Line Starts Here , Mastering Fashion Marketing , Grading Techniques For Modern Design , Design For The Stage: First Steps , Fashions Front Line: Fashion Show Photography From The Runway To Backstage , Libertine: The Creative Beauty, Humor, And Inspiration Behind The Cult Label , Badgley Mischka: American Glamour , Lanvin , Fashion Studies Research Methods Sites & Practices , Fashion Innovation & Marketing , Behind Collections , Chic Thrills A Fashion Reader , Knitted Clothing Technology , Pattern Magic 3 , Careers In Fashion & Textiles , Computer Aided Pattern Design & Product Development , Menswear Business To Style , Knitting Tips & Trade Secrets: Clever Solutions For Better Hand Knitting, Machine Knitting, And Crocheting (Threads On) , Fashion By Design , Going Global: Bundle Book + Studio Access Card , Survey Of Historic Costume: Bundle Book + Studio Access Card , Singer Sewing With Knits , Fashion Drawing Illustration Techniques For Fashion Designers 02Nd Edt , The Fairchild Dictionary Of Retailing , The Art Of Couture Sewing , Fashion Design Mannual , Fashion Marketing & Merchandising , The Apparel Industry 02Nd Edt , Fashion Sketchbook 7Th Ed , Make It Fit , Through The Wardrobe: Womens Relationships With Their Clothes , Wedding Dress Across Cultures , Fashion And The Consumer , Tailored Fashion Design , Costuming For Film: The Art And The Craft , Visual Selling And Design , Islamic Fashion And Anti-Fashion: New Perspectives From Europe And North America , Basic Pattern Skills For Fashion Design , Merchandise Buying And Management , Your Personal Style , The Fashion Designers Textile Directory:The Creative Use Of Fabrics In Design , Concepts And Cases In Retail And Merchandise Management 2Nd Edition , A Practical Approach To Merchandising Mathematics , Designers Guide To Fashion Apparel , Consuming Fashion: Adorning The Transnational Body , Mallarmé On Fashion: A Translation Of The Fashion Magazine La Dernière Mode, With Commentary , The Book Of Styling: An Insiders Guide To Creating Your Own Look , Fashion Forecasting: Bundle Book + Studio Access Card , Cool Shades: The History And Meaning Of Sunglasses , Galliano: Fashions Enfant Terrible , 1920S Jazz Age Fashion , Vintage Couture Tailoring , Russian Splendor: Sumptuous Fashions Of The Russian Court , American Style And Spirit: The Fashions And Lives Of The Roddis Family, 1850-1985 , Justyna Koeke: Princesses And Saints , Costume Through The Ages , Fashion And Eroticism: Ideals Of Feminine Beauty From The Victorian To The Jazz Age , Twentieth Century Fashion In Detail , 200 Women: Who Will Change The Way You See The World , Dressing For The Dark (Original Edition) , Style On The Street: From Tokyo And Beyond , Dior In Bloom , Gentleman , Lady Gaga And Popular Music : Performing Gender, Fashion And Culture , Firefly A Fairytalk By Ritu Beri , Women In Dior: Portraits Of Elegance , Costumes Patterns And Designs , Pattern Cutting And Making Up Forouterwear Fashions , Merchandise Buying 05Th Edt , Fashion Merchandising And Marketing , The Art Of Sewing , Ready To Wear Apparel Analysis , Sample Workbook To Accompany Professional Sewing Techniques For Designers 02Nd Edt , Little Green Dresses: 50 Original Patterns For Repurposed Dresses, Tops, Skirts, And More , New Fashion Areas For Designing Apparel Through The Flat Pattern (Textbook Of The Fit-Fairchild Series) , A History Of Costume In The West , Costumes And Characters Of British Raj – , Fashion, Style, And Image Consulting: Textbook Manual , Marketing Todays Fashion , Fashion Merchandising , Rimowa: An Archive, Since 1898 , Fashion Sketchbook: 196 Figure Templates For Designing Looks And Building Your Portfolio (Fashion Sketch) ( Fashion Sketch #10 ) , The Bridal Stylist: Style, Image & Fashion Consulting For Weddings , Womens Work: The First 20,000 Years Women, Cloth, And Society In Early Times (Revised) , The Secret Lives Of Dresses , Understanding Fashion , Foundations In Fashion , Fashionpedia: The Visual Dictionary Of Fashion Design , The Handbook Of Design Management , The Fashion Sketchpad: 420 Figure Templates For Designing Looks And Building Your Portfolio (Spiral-Bound) , Silent Selling: Bundle Book + Studio Access Card , Il Figurino Di Moda: The Fashion Drawing Book For Fashion Designers , Il Modellismo: Tecnica Del Modello Sartoriale E Industriale / Pattern Making Program , Fashion Culture & Identity , Fashion Illustration For Designers (Hardcover) , The Textile Book , The Giants Of Sportswear: Fashion Trends Throughout The Centuries , Knit Green: 20 Projects And Ideas For Sustainability , Omni-Channel Retailing And Its Requirements In The Supply Chain , The Print Revolution: Groundbreaking Textile Design In The Digital Age , Hats And Caps: Fashion Accessories Design (Hardcover) , Roberto Capucci – Art Into Fashion , Fashionable Encounters: Perspectives And Trends In Textile And Dress In The Early Modern Nordic World (Ancient Textiles Series) (Hardcover) , Fashion Forward: Bundle Book + Studio Access Card , Retail Buying: Bundle Book + Studio Access Card , Style Wise: Bundle Book + Studio Access Card , The Fashion Show : History, Theory And Practice , Strategic Fashion Management : Concepts, Models And Strategies For Competitive Advantage , British Fashion Design : Rag Trade Or Image Industry? , Fashioning Brazil: Globalization And The Representation Of Brazilian Dress In National Geographic (Dress And Fashion Research) , The Fashion Handbook , About Face : Performing Race In Fashion And Theater , The Face Of Fashion : Cultural Studies In Fashion , The Fashion History Reader : Global Perspectives , Teaching Fashion Studies , Knitwear : An Introduction To Contemporary Design , Fashionary Kids Figure Panel: 98 , Fashionary Mens Flat Panel: 98 , Fabrications: Costume And The Female Body , Retail Fashion Promotion And Advertising , The Fundamentals Of Fashion Management , Fashion Supply Chain Management , Complete Book Of Sewing Short Cuts- Printed Price , Muslim Fashion : Contemporary Style Cultures , Freehand Fashion: Learn To Sew The Perfect Wardrobe - No Patterns Required , Digital Pattern Cutting For Fashion With Lectra Modaris (R) : From 2D Pattern Modification To 3D Prototyping , To Die For : Is Fashion Wearing Out The World? , Zero Waste Fashion Design - 1St Ed , Paris Fashion : A Cultural History , Fashion Brand Merchandising , Visibly Muslim: Fashion, Politics, Faith. , Flat Track Fashion: The Roller Derby Look Book , Fashioning Models: Image, Text And Industry , Product Safety And Restricted Substances In Apparel , Industrial Engineering In Apparel Production , Japanese Fashion: A Cultural History , Virgil Abloh: Nike Icons , Moroccan Fashion: Design, Culture And Tradition , Berg Companion To Fashion (The) , Birth Of Cool: Style Narratives Of The African Diaspora (The) , Clothed Body (The) , Fashion Marketing Management (Woodhead Publishing India In Textiles) (Hardcover) , Apparel Merchandising And Quality Control , How To Become A Fashion Writer: Taking Your Writing To The Runway , Golden Spreay And Secret Flowers. Tradational Indian Textiles. , Warp & Weft A Dictionary Of Textile Terms , The Mechanism Of Weaving , Knitting Technology , Cotton Spinning , Watsons Advanced Textile Design , Textiles: Fiber To Fabric -06Th Edt , Technology Of Printing Vol4 , Cotton Dust: Controlling An Occupational Health Hazard , Man Through His Art: War And Peace , Chemistry Of Dyes And Principles Of Dyeing , Textile Finishing , Textile Technology & Design: From Interior Space And Outer Space , Technology Of Textile Processing: Vol: Iii, Technology Of Bleaching And Mercerizing , Mercerising , Weaving Calculations An Up To Date Comprehensiverefernce Books , Pictopia: Radical Design In A Brave New World , Hidden Nature: A Colouring Escape For Grown-Up , Tattoo Magic , Illustration Unzipped , Web Design Source Book , Picnic: New-Wave And Folklore In Contemporary Illustration , In Effect: Groundbreaking Finishes And Materials In Graphic Design , Scratch & Create: Hand-Lettered Life: Design Your Own Quotes With 16 Scratch Boards And 4 Alphabet And Ornament Stencils (Paperback) , Industrial Ruins: Space, Aesthetics And Materiality , Cyberpl@Y: Communicating Online , Collage In The Classroom , Doing 2015/2016: Red Dot Design Yearbook , Design The Key Concepts ( Paper ) , Design The Key Concepts ( Hard ) , Achille Castiglioni , The Eternal Letter - Two Millennia Of The Classical Roman Capital , Designing The French Interior: The Modern Home And Mass Media , Designing The Editorial Experience , The Material Culture And Social Institutions Of The Simpler Peoples (Routledge Revivals): An Essay In Correlation , British Design: Tradition And Modernity After 1948 , Show Me The Numbers: Designing Tables & Graphs To Enlighten , Sustainable By Design: Explorations In Theory And Practice , The Culture Of Nature In The History Of Design , Biorefineries: Design And Analysis , Instabilities And Potentialities: Notes On The Nature Of Knowledge In Digital Architecture, , Machine Learning For Computer And Cyber Security , Mechanical Creations In 3D: A Practical Look Into Complex And Technical Setups For Animation & Vfx , Autodesk Autocad Certified User Study Guide (Autocad 2019 Edition) , Biotensegrity : The Structural Basis Of Life , Perspectives On Data Science For Software Engineering , Giugiaro : Masterpieces Of Style , Collage By Women: 50 Essential Contemporary Artists , Optical Illusions In Graphic Design , Energy And Analytics : Big Data And Building Technology Integration , Reading Marx , Disability, Society And Assistive Technology , Intelligent Adaptive Systems : An Interaction-Centered Design Perspective , Constructive Ergonomics , Experimental Design : From User Studies To Psychophysics , Advances In Ergonomics Modeling And Usability Evaluation , Engineering Graphics With Solidworks 2019: A Step-By-Step Project Based Approach , Autodesk Revit 2019 Architecture Certification Exam Study Guide , Parametric Modeling With Solidworks 2019 , Solidworks 2019 And Engineering Graphics , The Writers Game , Advanced Vehicle Control : Proceedings Of The 13Th International Symposium On Advanced Vehicle Control (Avec16), September 13-16, 2016, Munich, Germany , Design For Health , Data Science For Business , Subject To Change Creating Great Products And Services For An Uncertain World , Design, When Everybody Designs: An Introduction To Design For Social Innovation ( Design Thinking, Design Theory ) , Theory Of Color , The Design Of Future Things , Paul Rand: Conversations With Students , Design And Form: The Basic Course At The Bauhaus And Later , The Image And The Eye: Further Studies In The Psychology Of Pictorial , Grid Systems In Graphic Design: A Visual Communication Manual For Graphic Designers, Typographers And Three Dimensional , Actionable Agile Tools , Design Methods 1: 200 Ways To Apply Design Thinking: Volume 1 , Product Design: Fundamentals And Methods (Product Development: Planning, Design, Engineering) , Design Discourse , The Power Of Place:Advanced Customer And Location Analysis For Retail Market Planning , Building Design Portfolios: Innovative Concepts For Presenting Your Work , Type On Screen: A Critical Guide For Designers, Writers, Developers, And Students , Visual Language For Designers: Principles For Creating Graphics That People Understand , Quantum Optics For Enginers , Understanding Brands , An Introduction To Qualitive Research 05Th Edt , The Art Of Game Worlds , Keyboard Players Chord Bible: Illustrated Chords For All Styles Of Music , The Art Of Computer Game Design , Emotionally Durable Design: Objects, Experiences And Empathy , Isometric Perspective Designs And How To Create Them (Dover Pictorial Archive) , Publics And Counterpublics , Twenty-Two Tips On Typography , Visual Research Methods In Design , What Designers. Know , In-Game: From Immersion To Incorporation , The Official Point Of View: Milano Furniture Fair , Data Design: Visualising Quantities, Locations, Connections , Zero To Five , Corrosion Prevention By Protective Coatings , Philips A Study Of The Corporate Management Of Design , The Praeger Handbook Of Education And Psychology: 4 , Design Thinking , Acting For Animators , Visual Grammar , Project Management For Design Professionals , Elements Of Design: Rowena Reed Kostellow And The Structure Of Visual Relationships , Graphic Design Thinking , Where The Action Is Foundation Of Embodied Interaction , Acting With Technology Activityy Theory & Interaction Design , Prints & Visual Communication , Display 2-D And 3-D Design For Exhibitions , Deep Work: Rules For Focused Success In A Distracted World , Pattern Grading For Mens Clothes , Drawing People , Materials And Design , Visual Merchandising And Store Design Workbook , Somethink Completely Different , How To Make It As An Advertising Creative , This Is Service Design Thinking.: Basics - Tools - Cases (Paperback) , Ergonomic Design For People At Work Vol: 2 , About Face 2.0 , Inspired Shapes: Contemporary Designs For Japans Ancient Crafts , Design For Corporate Culture , Principles Of Two-Dimensional Design , An Introductory Course In Computational Neuroscience (Computational Neuroscience Series) , Design Thinking: New Product Development Essentials From The Pdma , Principles Of Form And Design , Basics Graphic Design 01: Approach And Language , Vision In Motion , Working 2014-2015 Red Dot: Welcome To The World Of Design, Red Dot Design Yearbook , The Stroke Theory Of Writing , Art And Visual Perception - A Psychology Of The Creative Eye 50Th Anniversary , How To Draw: Drawing Basics Sketchbook , How To Draw Athletic Shoes Sketchbook: 2 , How To Draw: Super Heroes , How To Draw: Figures , Abcs Of The Bauhaus: Bauhaus And Design Theory , Drawing, Seeing And Observation , International Standards For Food Safety , Industrial Design Engineering: Inventive Problem Solving , Automotive Product Development: A System Engineering Implementation , Design For The Real World: Human Ecology And Social Change , The Elements Of Typographic Style , Emotional Design: Why We Love , Printing Things: Visions And Essentials For 3D Printing , In Love With Me - Wedding Stationery Design , Drawing: A Creative Process , Designing With Type5 Edition , Design In Focus Graphic Design , Pencil Sketching , By Design 2Nd Edition , A Primer Of Visual Literacy , Sustainability Assessment : Applications And Opportunities , Visualization Analysis And Design , Art Synectics , Building Design Strategy , My Life In The New York Times , The Pocket Small Business Owner’S Guide To Starting Your Own Business On A Shoestring , The Design Journey , How To Start A Faux Painting Or Mural Business, Second Edition , Dialog What Makes A Great Design Partnership-Ken Carbone & Leslie Smolan , Brilliant: Lights And Lighting , The Pocket Small Business Owner’S Guide To Taxes , The Big Book Of Brain Games: 1,000 Playthinks Of Art, Mathematics & Science , Ballot , The Metainterface - The Art Of Platforms, Cities, , Adobe Photoshop Cs6 Classroom In A Book [With Dvd] ( Classroom In A Book (Adobe) ) , How To Make Your Home A Smart Home , Design By Numbers , The Social Machine - Designs For Living Online , Information Design , Writers Under Surveillance: The Fbi Files ( Mit Press ) , Instruction And Technology - Designs For Everyday , A Handbook Of California Design, 1930-1965 - , Iterate: Ten Lessons In Design And Failure ( Mit Press ) , Aesthetic Computing , Participatory It Design - Designing For Business , An Interdisciplinary Introduction To Image , Sonic Interaction Design , Various Small Books - Referencing Various Small , Hybrid Nature - Sewage Treatment And The , Everyday Engineering - An Ethnography Of Design , Ignorance And Surprise - Science, Society, And , Ineke Hans: Was Ist Loos? ( Sternberg Press ) , Interface , The Art Of Failure - An Essay On The Pain Of , Press On - Principles Of Interaction Programming , Walker Evans: Kitchen Corner ( Afterall Books / One Work ) , Playing With Sound - A Theory Of Interacting With , Discursive Design: Critical, Speculative, And Alternative Things ( Design Thinking, Design Theory ) , Walter Benjamin Reimagined: A Graphic Translation Of Poetry, Prose, Aphorisms, And Dreams ( Mit Press ) , Rethinking A Lot - The Design And Culture Of , Interactive Visualization - Insight Through , Electric Light: An Architectural History ( Mit Press ) , Improvisational Design - Continuous, Responsive , Synthetic Aesthetics - Investigating Synthetic , Spacesuit - Fashioning Apollo , Adhocism - The Case For Improvisation , Building Mobile Experiences , The Making Of Prince Persia , Beyond The Desktop Metaphor - Designing Integrated , Designing An Internet ( Information Policy ) , Prototypes ( Sternberg Press ) , Blueprint: How Dna Makes Us Who We Are ( Mit Press ) , Atlas Of Knowledge - Anyone Can Map , Muriel Cooper , Typographic Communications Today , California Design, 1930-1965 - Living In A Modern , Culture Is Not Always Popular: Fifteen Years Of Design Observer ( Mit Press ) , Making Futures: Marginal Notes On Innovation, Design, And Democracy , The Grid Book , Gyorgy Kepes: Undreaming The Bauhaus ( Mit Press ) , Collaborative Media - Production, Consumption, And , Designed For Hi-Fi Living: The Vinyl Lp In Midcentury America ( Mit Press ) , The Materiality Of Interaction - Notes On The , Artificial Unintelligence: How Computers Misunderstand The World , Designing Publics , Design And Art , Why Humans Matter More Than Ever ( Digital Future Of Management ) , Who Wins In A Digital World?: Strategies To Make Your Organization Fit For The Future ( Digital Future Of Management ) , Two Wheelers , Power Electronics For Renewable Energy Systems, Transportation And Industrial Applications , The Craft Of Research ( Chicago Guides To Writing, Editing, And Publishing ) , Magma Sketchbook: Film & Animation , Basic Visual Concepts And Principles For Artists, Architects And Designers , Web Data Mining 2Nd Ed , Visual Literacy: Learn To See, See To Learn , Paper Sculpture: Step By Step Guide , Love Objects: Emotion, Design And Material Culture , Semiology Of Graphics: Diagrams, Networks, Maps , Growth: From Microorganisms To Megacities ( Mit Press ) , Design Beyond Devices: Creating Multimodal, Cross-Device Experiences , How To Draw: Drawing And Sketching Objects And Environments From Your Imagination , Street Furniture Design: Contesting Modernism In Post-War Britain (Paperback) , 101+ Things To Do With Glitter , Digital Design: A Critical Introduction , Mas Creaturas: Monstruo Addendum , Country And Modern: Contemporary Interiors For Rural Settings , Che Guevara: Revolutionary And Icon , Www Design World , Crazy Gifts , Polyedra Presents: Italian Design Is Coming Home. To Switzerland. , Gerhard Richter , Lingua Digitalis: Pictograms Ofthe Interface Age , Next Nature , Top Sketches , Clubspotting , Yayoi Kusama , Advanced High Dynamic Range Imaging , A Concise Introduction To Hypercomplex Fractals , Applying Color Theory To Digital Media And Visualization , Facing The Unexpected In Flight , Essential Computer Graphics Techniques For Modeling, Animating, And Rendering Biomolecules And Cells , Browsers, Devices, And Fonts , Bio-Climatology For Built Environment , Combinatorial Maps , Diffusion-Driven Wavelet Design For Shape Analysis , Autonomous And Integrated Parking And Transportation Services , The Introduction To Private Cloud Using Oracle Exadata And Oracle Database , Digital Design In Action , Fundamentals Of Graphics Using Matlab , Interactive Data Visualization , Gpu Pro 360 Guide To Shadows , Gpu Pro 360 Guide To Mobile Devices , Gpu Pro 360 Guide To Lighting , Gpu Pro 360 Guide To Image Space , Gpu Pro 360 Guide To 3D Engine Design , Introduction To Visual Computing , Precision Photoshop , Prepare To Board! Creating Story And Characters For Animated Features And Shorts , Introduction To Human Factors , Image Content Retargeting , Information Theory Tools For Visualization , Fluid Frames , Sketching As Design Thinking , Doing Things With Things : The Design And Use Of Everyday Objects , Nairns Paris , The Computer And The Brain , Karl Gerstner: Designing Programmes , Introduction To Finite Element Analysis Using Creo Simulate 6.0 , Introduction To Autocad 2020 For Civil Engineering Applications , Engineering & Computer Graphics Workbook Using Solidworks 2019 , Virtual Machining Using Camworks 2019 , Tutorial Guide To Autocad 2020 , Parametric Modeling With Siemens Nx (Spring 2019 Edition) , Tools For Design Using Autocad 2020 And Autodesk Inventor 2020 , Parametric Modeling With Autodesk Inventor 2020 , Parametric Modeling With Autodesk Fusion 360 (Spring 2019 Edition) , Parametric Modeling With Creo Parametric 6.0 , Principles And Practice An Integrated Approach To Engineering Graphics And Autocad 2020 , Solidworks 2019 Quick Start , Solidworks 2019 Tutorial , Essential Effects , Autodesk Inventor Certified User Study Guide (Inventor 2020 Edition) , Creo Parametric 6.0 Tutorial , Creo Parametric 6.0 Advanced Tutorial , Creo Simulate 6.0 Tutorial , Autodesk Inventor 2020 And Engineering Graphics , Autodesk Inventor 2020 Essentials Plus , Autocad 2020 Tutorial First Level 2D Fundamentals , Autodesk Autocad Certified User Study Guide (Autocad 2020 Edition) , Autodesk Inventor 2020 A Tutorial Introduction , Autodesk Autocad 2020 Fundamentals , An Engineers Introduction To Programming With Matlab 2019 , An Introduction To Solidworks Flow Simulation 2019 , A Concise Introduction To Engineering Graphics (6Th Ed.) Including Worksheet Series B , A Concise Introduction To Engineering Graphics (5Th Ed.) Including Worksheet Series A , Autocad 2020 Tutorial Second Level 3D Modeling , Official Guide To Certified Solidworks Associate Exams (2018-2019) , Mechanism Design And Analysis Using Ptc Creo Mechanism 6.0 , Machining Simulation Using Solidworks Cam 2019 , Official Certified Solidworks Professional Certification Guide (Solidworks 2018, 2019, & 2020) , Machining Simulation Using Solidworks Cam 2018 , Learning Autodesk Inventor 2020 , Research Methods In Human-Computer Interaction , What Images Really Tell Us: Visual Rhetoric In Graphic Design, Art And Advertising , Ergonomics: How To Design For Ease And Efficiency , Product Experience , Design, Create, Thrill: The Power Of Graphic Design To Spark Emotions , Exploring Collage And Mixed Media Techniques , Ruf The Limited One , Bauhaus. Updated Edition , Fredun Shapur - Playing With Design , The Story Of Tools : A Celebration Of The Beauty And Craftsmanship Behind The Tools Of Handmade Trades , Jacques Tati. The Complete Works , Reinventing Screenprinting: Inspirational Pieces By Contemporary Practitioners , Retro: A Guide To The Mid-20Th Century Design Revival , Wall Art -Wall Paper / Painting / Decoration /Sticker , Fabrica 1994 - 2004 , China Design Now , Art Directors Annual: 91 , Piecebook Reloaded: Rare Graffiti Drawings, 1985-2005 , Marshall Mcluhan Unbound / Druk 1 , More Human: Designing A World Where People Come First (Paperback) , New Nonfiction Film : Art, Poetics, And Documentary Theory , Clubspotting 2.0 , Device: File Under: Art, Commercial , Moroccan Carpets And Modern Art , Modeling And Visualization With Autocad , Graphic Agitation: Social And Political Graphics Since The Sixties , Geometrical Drawing For Art Students - , Figure Drawing: Desing & Invention , Store Design And Visual Merchandising Creating Stores Space That Encourages Buying , M.I.A. , Wolfgang Tillmans Neue Welt , Designing The Digital Experience: How To Use Experience Design Tools & Techniques To Build Web Sites Customers Love , The Mitrokhin Archive Ii: The Kgb In The World , Inclusive Design For Products , Grid Systems: Principles Of Organizing Type , Shadow Type: Classic Three-Dimensional Lettering , Paper Engineering For Designers , Business And Legal Forms For Crafters , Verbalising The Visual: Translating Art And Design Into Words , Introduction To Tensegrity , Foot Work : What Your Shoes Are Doing To The World , Design Thinking: The Handbook , Kaws : He Eats Alone , Imagine!: Automobile Concept Art From The 1930S To The 1980S , Designing Type Second Edition , Twelve Faces Of Time: Horological Virtuoso , John Chamberlain: New Sculpture , Art Nouveau And The Erotic , The Field Guide To Human Centered Design , Adobe Animate Classroom In A Book (2020 Release) , Ethnography And Virtual Worlds : A Handbook Of Method , The Healthy Mind Toolkit : Quit Sabotaging Your Success And Become Your Best Self , Ux Research , Tibetan Typeforms - An Historical And Visual Analysis Of Tibetan Typefaces , International Yearbook Brands & Communication Design 2020/2021. 2 Volumes , Design The Indian Context , Style & Civilizations , Big Eye Art: Resurrected & Transformed , Sustain And Develop , Red Dot Design Concept Yearbook 2013/2014 , Drive Style , Human Scale Manual 03 Book Set , Lolli-Pop , Places , Visual Journalism: Infographics From The Worlds Best Newsrooms And Designers , Car Design Review 2 , Car Design Review 3 , Car Design Review 5 , Kata Legrady: Bombs And Candies , Penelope Umbrico: Photographs , Creating Innovative Products Using Total Design: The Living Legacy Of Stuart Pugh , Design In Mind , Thought Up In Barcelona 2 , Technological Innovation: A Methodology , Sarah Illenberger , Peter Chang , Starting Up A Gallery And Frame Shop , The Professional Practice Of Design , Soa In Practice: The Art Of Distributed System Design , Vision And Values In Design Management , Logograma: Logo Design For Dynamic Identities , 3D Paper Craft: Snow White And The Seven Dwarfs , Origamido: The Art Of Paper Folding , Design And Environment: A Primer , The Strategic Designer: Tools & Techniques For Managing The Design Process , The Elements Of Black- And- White Printing: Going Beyond Darkroom Basics , Illusive 4: Contemporary Illustrations , The Art Of The Storyboard- Third Edition: A Filmmakers Introduction , The Business Of Design: Balancing Creativity And Profitability , Graphic Design Theory: Readings From The Field , Applied Security Visualization , The Drive Custom Cars & Their Builders , Newspaper Design : Editorial Design From The Worlds Best Newsrooms , Shoplifter! : New Retail Architecture And Brand Spaces , Alphabeatz: Tagging Alphabets From A To Z , Everyday Materials For Physical Interactive Systems , D&Ad. The Copy Book , Creativity Works! : Unleash Your Creativity, Beat The Robot And Work Happily Ever After , Pitching Ideas : Make People Fall In Love With Your Ideas , Contrarian Branding : Stand Out By Camouflaging The Competition , Designing With And Within Public Organisations : Building Bridges Between Public Sector Innovators And Designers , Nederlandse Autodesigners , Waft 3 , Ever Since I Was Young Boy Ive Been Drawing Cars In My Sketch Book , The Age Of Sustainable Development , Hands-On Machine Learning With Scikit-Learn, Keras, And Tensorflow: Concepts, Tools, And Techniques To Build Intelligent Systems , Cloud Computing: 2018 , Experience The Message: How Experiential Marketing Is Changing The Brand World , Branded Entertainment: Dealmaking Strategies & Techniques For Industry Professionals , Virtual Reality: The Revolutionary Technology Of Computer-Generated Artificial Worlds-And How It Promises To Transform Society ( Touchstone Book , Experiential Marketing: How To Get Customers To Sense, Feel, Think, Act, R , Product Design Styling , The Interaction Field: The Revolutionary New Way To Create Shared Value For Businesses, Customers, And Society , 100 Things Every Designer Needs To Know About People , Cloud Computing: A Hands-On Approach , Techniques Of Visual Persuasion: Create Powerful Images That Motivate , Keeping Up With Emerging Technologies: Best Practices For Information Professionals , The Heart To Start: Stop Procrastinating & Start Creating , 101 Creative Writing Exercises ( Adventures In Writing #2 ) , Make It Bigger , Game Usability : Advancing The Player Experience , Critical Encounters With Immersive Storytelling , Sound Curriculum : Sonic Studies In Educational Theory, Method, & Practice , Immersive Longform Storytelling : Media, Technology, Audience , Immersive Journalism As Storytelling : Ethics, Production, And Design , Designing Public Policies : Principles And Instruments , Challenges And Solutions In Ethnographic Research : Ethnography With A Twist , Design Against Crime : A Human-Centred Approach To Designing For Safety And Security , Universal Access Through Inclusive Instructional Design : International Perspectives On Udl , Designing For The Disabled: The New Paradigm , Immersive Sound : The Art And Science Of Binaural And Multi-Channel Audio , 101 Things I Learned(R) In Product Design School ( 101 Things I Learned ) , Eat That Frog!: 21 Great Ways To Stop Procrastinating And Get More Done In Less Time , Designing Your Life: How To Build A Well-Lived, Joyful Life , Fui: How To Design User Interfaces For Film And Games: Featuring Tips And Advice From Artists That Worked On: Minority Repo , Designing Brand Identity 05Th Edt , Lettering & Type: Creating Letters And Designing Typefaces , Fresh Dialogue 8: Designing Audiences / New Voices In Graphic Design , Driving With Music: Cognitive-Behavioural Implications , Safe Design And Construction Of Machinery , Designing Technology Training For Older Adults In Continuing Care Retirement Communities , Applied And Systemic-Structural Activity Theory , The Story Of Industrial Engineering , Hostile Intent And Counter-Terrorism , Improving Aviation Performance Through Applying Engineering Psychology , Increasing Motorcycle Conspicuity , Beyond Command And Control , Cybersecurity Awareness Among Students And Faculty , Distributed Situation Awareness In Road Transport , Human Factors For Sustainability , Redesigning Animation , Reinforcement Learning For Cyber-Physical Systems , Twice The First , Intelligent Video Surveillance Systems , X-Machines For Agent-Based Modeling (Open Access) , Understanding Geometric Algebra , Internet-Scale Pattern Recognition , Service-Oriented Distributed Knowledge Discovery , Agent-Based Modeling And Simulation With Swarm , Dynamic Web Programming And Html5 , Ergonomics For The Layman: Applications In Design , Behavior Trees In Robotics And Ai: An Introduction , Photojournalism Disrupted , Green Engineering , Systems Reliability And Usability For Engineers , Contemporary Cinema And Neoliberal Ideology , Easy A , From Networks To Netflix , Global Finance On Screen , Screening Characters , The Breakfast Club , Advanced Optimization And Decision-Making Techniques In Textile Manufacturing , Design Sketching (Including An Extensive Collection Of Inspiring By 24 Students At The Umea Institute Of Design) , Introduction To Data Visualization & Storytelling: A Guide For The Data Scientist , Documentary Tradition 02Nd Edt , The Mental Life Of Modernism: Why Poetry, Painting, And Music Changed At The Turn Of The Twentieth Century ( Mit Press ) , Science Fiction ( Whitechapel: Documents Of Contemporary Art ) , Documentary In Dispute: The Original Manuscript Of Changing New York By Berenice Abbott And Elizabeth Mccausland ( Ric Books (Ryerson Image Centre Books) ) , The Best Of Making Things: A Hand Book Of Creative Discovery , Get The Picture: Visual Literacy In Content-Area Instruction ( Get The Picture: Visual Literacy ) , Color Design Workbook: A Real World Guide To Using Color In Graphic Design , The Seven Laws Of Guaranteed Growth , Guido Mocafico: Mocafico Numero , Psychogeometries , Grid Converters For Photovoltaic And Wind Power Systems , Color On Metal: 50 Artists Share Insights And Techniques , Inclusive Design Patterns: Coding Accessibility Into Web Design , Design Systems: A Practical Guide For Creating Design Languages For Digital Products , User Experience Revolution , Smashing Magazine Print Ethics & Privacy , Game Physics Cookbook , Layout Essentials: 100 Design Principles For Using Grids (Design Essentials) , Design Elements: A Graphic Style Manual , Ux Methods: A Quick Guide To User Experience Research Methods , Human Factors In Product Design Current Practice And Future Trends , Routledge International Handbook Of Particpatory Design , Pattern And Shape Looking & Seeing 1 , The Shapes Of Town Looking And Seeing 4 , Good An Introduction To Ethicsin Graphic Design , Principles Of Color Design , Conversations With Things: Ux Design For Chat And Voice , Eye Tracking The User Experience: A Pratcial Guide To Research , Content Everywhere: Strategy And Structure For Future Ready Content , Service Design From Insight To Implemntation , The Mobile Frontier A Guide For Designing Mobile Experiences , Skeren Sketchbook (Sketching And Drawing Skills For Product Design) , Plyaful Design: Creating Game Experiences In Everyday Interfaces , Sensory Design , Driven - Vehicles By Upcoming Car Designers , The Form And The Function Follow The Main Concept , Understanding Digital Marketing : A Complete Guide To Engaging Customers And Implementing Successful Digital Campaigns , Why Grizzly Bears Should Wear Underpants : 4 , Plan B 4.0 : Mobilizing To Save Civilization , Ai Superpowers : China, Silicon Valley, And The New World Order , Software Defined Networks: A Comprehensive Approach (2Nd Ed.) , Managerial Economics: Applications, Strategies And Tactics ( Mindtap Course List ) (14Th Ed.) , The Spiders Thread: Metaphor In Mind, Brain, And Poetry ( Mit Press ) , Teaching For Quality Learning At University: What The Student Does (4Th Ed.) , Drawing For Designers , See What I Mean: How To Use Comics Communicate Ideas , Why We Fail:Learning From Design Failures , Managing Chaos: Digital Governence By Design , Service Design 250 Essential Methods , 50 Brain Storming Methods For Team And Individual Ideation , Visual Explanations , Branded Entertainment: Product Placement And Brand Strategy In The Entertainment Business , Relationship Marketing: A Consumer Experience Approach (Sage Advanced Marketing Series) (Paperback) , Universal Design Creating Inclusive Environment , The New Relationship Marketing: How To Build A Large, Loyal, Profitable Network Using The Social Web , Qualitative Research: A Guide To Design And Implementation , Design Thinking Pocket Guide 02Nd Edition , Contestable Markets And The Theory Of Industry Structure By William Baumol & John C. Panzar. , The Translational Design Of Schools: An Evidence-Based Approach To Aligning Pedagogy And Learning Environments (Advances In Learning Environments Research) , An Introduction To Partial Differential Equations With Matlab , 30 Good Ways To Innovate Designers Managers , Designing Interactions + Dvd , Design Basics Index , Stop Stealing Sheep & Find Out How Type Works , Greeting Cards And Other Graphics For Special Occasions , Sculpture Casting Studio Edt: Mold Techniques , A Geometric Analysis Of The Platonic Solids And Other Semi Regular Polyhedra , Overlap Web & Typography , Altair Design Post Card Book No: 2 Enhance & Stimulate Your Imagination , Altair Design Geometric Colouring Books Patern Pad No: 02 , Altair Design Geometric Colouring Books Islamic Pattern , Altair Design Geometric Colouring Books Penrose Tilings , Platonic And Archimedean Solids , Perspective And The Other Optical Illusions , Celtic Pattern , Sacred Geometry , The Golden Section , The Production Mannual 02Nd Edition , The Complete Guide To Drones Extended 2Nd Edition , Adobe Illustrator Cc 2018Classroom In A Book (Paperback) , Bespoke The Handbuilt Bicycyle , H Point Thg Fundamentals Of Car Design & Packaging 02Nd Edition , Cleworth An Art Full Life , Becoming A Graphic And Digital Designer: A Guide To Careers In Design , Deep Space In Dark Tone , Search Indonesia, Malaysia: Discovering Southeast Asia Graphic Design Studio , Brand Addiction: Designing Identity For Fashion Retail , Punch Drunk Moustache Round 2: Independently Brewed Visual Storytelling & Development , Joyride/Flatout: Hot Rods And Dream Machines , Innovation By Design: How Any Organization Can Leverage Design Thinking To Produce Change, Drive New Ideas, And Deliver Meaningful Solutions , Teaching Design: A Guide To Curriculum And Pedagogy For College Design Faculty And Teachers Who Use Design In Their Classrooms , Framespotting: Changing How You Look At Things Changes How You See Them , Super Graphic A Visual Guide To The Comic Book Universe , Designing Media , Basic Illustration: Text & Image , The Elements Of User Experience: User-Centered Design For The Web And Beyond - Voices That Matter , Design For The Environment , Mastering Hand Tool Techniques : A Comprehensive Guide On How To Sharpen, Tune And Use Classic Hand Tools To Add Power To Your Woodworking , Innovating With People: The Business Of Inclusive Design , The Art & Craft Of Sign Writing , Understanding Material Culture , Coastal Management: Global Challenges And Innovations , The Material Cutlure Reader , Innovation By Design Lessons From Post Box Design , Undesign: Critical Practices At The Intersection Of Art And Design , Fundamentals Of Geriatric Medicine , National 5 Design And Manufacture Study Guide , Perceptual Learning , Design. Think. Make. Break. Repeat. , Steinberger : A Story Of Creativity And Design , Alien Phenomenology, Or What Its Like To Be A Thing , How Musical Is Man? ( John Danz Lectures ) , Donald Judd , Artist Teacher : A Philosophy For Creating And Teaching , In 100 Years: Leading Economists Predict The Future ( Mit Press ) , Sonic Flux: Sound, Art, And Metaphysics , The Shape Of Ideas: An Illustrated Exploration Of Creativity , Italic: What Gives Typography Its Emphasis , Design Research Through Practice: From The Lab, Field, And Showroom , Haunted Bauhaus: Occult Spirituality, Gender Fluidity, Queer Identities, And Radical Politics ( Mit Press ) , Algorithms Of Oppression: How Search Engines Reinforce Racism , Moving To Mars: Design For The Red Planet , Patented : 1,000 Design Patents , Wasted : When Trash Becomes Treasure , The Impossible Collection Of Design ( Ultimate ) , Wigs And Make-Up For Theatre, Tv And Film , Living In Digital Worlds: Designing The Digital Public Space , How Images Think , Designline , New Media: A Critical Introduction , Women Design Pionners In Architecture, Industrial, Graphic , The Innovation Expedition , Creative Chef : How To Create A Mind-Blowing Food , Wonder Wood: A Favorite Material For Design, Architecture And Art , Steel Couturesyd Meadfuturist Sentinel , Digital Sculpting With Mudbox: Essential Tools And Techniques For Artists , The Graphic Designers Guide To Better Business Writing , Web Navigationdesigning The User Experience + Cd , Basics Of Design: Layout And Typography For Beginners , Blobjects And Beyond: The New Fluidity In Design , Porsche Unexpected: Discoveries In Collecting (Hardcover) , Concours Retrospective (Hardcover) , Headset - A Design Handbook For Sound And Shape , Curves Of Steel: Streamlined Automobile Design At Phoenix Art Museum , Artists & Graphic Designers Market 2013 (Artists And Graphic Designers Market) (Paperback) , Flow , Digital Color And Type , Photoelectric Photometry Of Variable Stars: A Practical Guide For The Smaller Observatory , A Managers Guide To Work Study , Lifecycle Costing For Design Professionals , Designing Pleasurable Products , Digital And Marketing Asset Management , Designing Interface Animation , The Family , The Handbook Of Visual Culture , Epica Book 29: Creative Communications , Thinking: Objects: Contemporary Approaches To Product Design , No Logo: No Space, No Choice, No Jobs (-10Th Anniversary) (3Rd Ed.) , Simply Brilliant: Powerful Techniques To Unlock Your Creativity And Spark New Ideas , How To See The World: An Introduction To Images, From Self-Portraits To Selfies, Maps To Movies, And More , Mechanization Takes Command: A Contribution To Anonymous History , Information Technology Essentials: Basic Foundations For Information Technology Professionals , Design And Deliver: Planning And Teaching Using Universal Design For Learning , Victore Or, Who Died And Made You Boss? , Basics Interactive Design: Interface Design: An Introduction To Visual Communication In Ui Design , Newsworkers: A Comparative European Perspective , Design For Profitability , The Age Of Collage Vol. 3 : Contemporary Collage In Modern Art , The Patterned Mind - Creative Methods In Surface Design , Deep Learning With Python , Designing Lightness - Structures For Saving Energy , Tsutsumu: The Origin Of Japanese Packaging , Structural Packaging: Gold , How Brands Grow : What Marketers Dont Know , How Brands Grow: Part 2: Emerging Markets, Services, Durables, New And Luxury Brands , Universal Methods Of Design , Information Visualization : Perception For Design 04Th Edt , Sailplane Design : A Guide For Students And Designers, From Drafting To Flight Test , Foundations Of Art And Design , Sketching With Markers , Envision: The Young Accessory Designers Guide To Collection Development , Concept Car Design: Driving The Dream (Interior And Industrial Design) , Universal Usability: Past, Present And Future, , Qualitative Research , Experiments In Form A Foundation Course In Three Dimensional Design , The Elements Of Pop-Up , Mykonos Muse , The Italian Smart Office: The Story Of Estel , Thinking In Systems: Strategies For Problem Solving, Planning And Critical Thinking , Second Foundation ( Foundation Novels , Feck Perfuction: Dangerous Ideas On The Business Of Life , The Tangled Mind: Unraveling The Origin Of Human Nature , The Bag Making Bible , My World My Originality 3: Shops , Design: A Very Short Introduction (Very Short Introductions) (Paperback) , Symbol Logos And Tradmarks 1500 Outsanding Designs From India , Creative Marker Techniques Paperback , Carsten Nicolai: Parallel Lines Cross At Infinity , The 3D Printing Handbook: Technologies, Design And Applications , Module, Proportion, Symmetry, Rhythm (Hardcover) , Sculpture Tools Materials And Technqiues , Education Of Vision , Teaching Graphic Design: Course Offerings And Class Projects From The Leading Graduate And Undergraduate Programs , Material Matters 03: Stone , Should We All Be Vegan? , Rhetoric Of Logos : A Primer For Visual Language , Industry 4.0 The Industrial Internet Of Things , Public Transport And Its Users: The Passengers Perspective In Planning And Customer Care (Transport And Society) , Dieter Rams: Ten Principles For Good Design (Hardcover) , Design And Craft In Education , Digital Design Theory: Readings From The Field , Inclusive Design Tool Kit , Max Bills View Of Things: Die Gute Form: An Exhibition 1949 , Probability In Electrical Engineering And Computer Science: An Application-Driven Course , An Introduction To Ordinary Differential Equations (Revised) , Designa: Technical Secrets Of The Traditional Visual Arts ( Wooden Books ) , Digital Engagement: Internet Marketing That Captures Customers And Builds Intense Brand Loyalty , This Is What Democracy Looked Like: A Visual History Of The Printed Ballot , The Imaginary World Of , Kant And The Platypus: Essays On Language And Cognition , Visual Complexity: Mapping Patterns Of Information , Odyssey Works: Transformative Experiences For An Audience Of One , The Beauty Of Geometry: Twelve Essays , Its A London Thing: An Insiders City Guide , Design Pleasure Or Responsibility , Body Space Anthropometry Ergonomics And The Design Of Work , Emotionally Intelligent Design , Logo R.I.P , Mindstorms Children Computers And Powerful Ideas , The Designer As…: Author, Producer, Activist, Entr , Process 2Nd Edition: 50 Product Designs From Concept To Manufacture , Graphic Design And Reproduciton Techniques , Envisioning Information. Cheshire, Connecticut, , Beautiful Visualization , The Creative Writing Students Handbook (Creativewritingmatters Guides 1) , Art Of The Jungle Book , The Art Of Drawing , Ascent - Center For Technical Knowledge, Autodesk Fusion 360 Introduction To Parametric Modeling , Design Methods 2 200 More Ways To Apply Design Thinking , 50 Selected Design Methods: To Transform Your Design , The Upcycle: Beyond Sustainability - Designing For Abundance , The Art And Color Of General Motors , International Yearbook Communication Design 18/19 , Pretense Design: Surface Over Substance ( Design Thinking, Design Theory ) , Invitations, Greeting Cards, Postcards And Self-Promotion , Playing Smart: On Games, Intelligence, And Artificial Intelligence ( Playful Thinking ) , Omni Channel Marketing : The Roadmap To Create And Implement Omnichannel Strategy For Your Business , How Smart Machines Think ( Mit Press ) , Transatlantic Style , Cell Phone Culture: Mobile Technology In Everyday Life (Paperback) , Animals: 1000 Handmade Illustrations , Contextual Design: Design For Life , Design To Renourish: Sustainable Graphic Design In Practice , Learning To See 2 Teachers Book , Remediation: Understanding New Media , Elements Of Design Shape & Form , Design Anthropology: Theory And Practice , Engineering Graphics Essentials With Autocad 2017 Instruction (Including Unique Access Code) , Autodesk Inventor 2017 Essentials Plus , Learning Autodesk Inventor 2017 , Design Thinking: Beyond The Sticky Notes , Questions Of Cultural Identity (Paperback) , The Culture Of Design , Sheet Metal Technology , Planning The Project , The Art Of Looking Sideways , Communication Skills , Polyhedron Models , Theories And Practice In Interaction Design (Human Factors And Ergonomics) (Hardcover) , Not By Design: Lockdown Diary , The Digital University - Building A Learning Community , Folding Paper: The Infinite Possibilities Of Origami: Featuring Origami Art From Some Of The Worlds Best Contemporary Papercraft Artists (Hardcover) , Thinking In Systems: A Primer (Paperback) , World History Of Design 02 Volume Set , Basic Principles Of Design: The Foundation Program At The School Of Design Basel, Switzerland Vol:1,2,3,4 , A Textbook Of Engineerign Mathematics , Customer And Business Analytics: Applied Data Mining For Business Decision Making Using R (Chapman & Hall/Crc The R Series) , Human-Computer Interaction (Revised) (3Rd Ed.) , The Right Way To Select Technology: Get The Real Story On Finding The Best Fit , Weird Ideas That Work: How To Build A Creative Company , About Face: The Essentials Of Interaction Design (Revised) (4Th Ed. , Design Fundamentals , Design Thinking Methdology , Nike: Better Is Temporary , Design And Technology , Essential Elements: Atoms, Quarks And The Periodic Table (Mathemagical Ancient Wizdom) , Sacred Number (Wooden Books Gift Book) (Paperback) , Stanton Drew : And Its Ancient Stone Circles , Ancient Celtic Coin Art (Paperback) , Ethics: The Art Of Character (Wooden Books) (Paperback) , Portals: Gates, Stiles, Windows, Bridges, & Other Crossings (Wooden Books Gift Books) , Proverbs: Words Of Wisdom (Wooden Books) (Paperback) , Operating Systems: Three Easy Pieces , Irish Round Towers (Wooden Books Gift Book) (Paperback) , Sacred Springs - Holy Wells In Great Britain (Wooden Books Gift Book) (Paperback) , Crop Circle , Lipsmacking Backpacking: Cooking Off The Beaten Track (Mathemagical Ancient Wizdom) (Paperback) , Leys: Secret Spirit Paths In Ancient Britain (Wooden Books Gift Book) (Paperback) , Ancient British Rock Art: A Guide To Indigenous Stone Carvings , St Patrick: His Life And Legend (Mathemagical Ancient Wizdom) , Avebury (Wooden Books Gift Book) (Paperback) , Useful Math & Physical Formulae (Wooden Books Gift Book) (Paperback) , Stonehenge (Wooden Books Gift Book) (Paperback) , Herbal Healers (Wooden Books Gift Book) (Paperback) , Heavy Vehicle Systems , Facilities And Workplace Design , “Introduction To Work Study And Organization And Methods”, Butterworths, 1969. , Service Design By Industrial Designers , Leathercraft (Goodheart-Willcoxs Build-A-Course Series) , Simple Shelters: Tents, Tipis, Yurts, Domes And Other Ancient Homes (Paperback) , Ancient English Cathedrals (Wooden Books Gift Book) (Paperback) , The Miracle Of Trees (Wooden Books Gift Books) (Paperback) , Native British Trees (Wooden Books Gift Book) (Paperback) , Feng Shui: Secrets Of Chinese Geomancy (Paperback) , Evolution: A Little History Of A Great Idea (Wooden Books Gift Book) (Paperback) , Inspiring Creativity: An Anthology Of Powerful Insights And Practical Ideas To Guide You To Successful Creating: 1 , Symmetry: The Ordering Principle (Wooden Books Gift Book) (Paperback) , Affirmtion For Artists , A Hedgerow Cookbook (Wooden Books Gift Book) (Paperback) , A Little History Of Dragons (Wooden Books Gift Book) (Paperback) , Retailing In Emerging Markets (Paperback) , Handbook Of Human Factors For Automated, Connected, And Intelligent Vehicles , Reinforcement Learning, Second Edition: An Introduction ( Adaptive Computation And Machine Learning ) (2Nd Ed.) , Windows And Mirrors: Interaction Design, Digital Art, And The Myth Of Transparency , Design History – An Anthology , How Games Move Us – Emotion By Design (Playful Thinking) (Paperback) , Models Of Innovation – The History Of An Idea (Inside Technology) (Hardcover) , Processing – A Programming Handbook For Visual Designers And Artists (Hardcover) , Sifting The Trash – A History Of Design Criticism (Hardcover) , The Idea Of Design (Paperback) , Things That Keep Us Busy – The Elements Of Interaction (Hardcover) , Exploring Media Research , The Modern Drawing , Universal Design For Transition: A Roadmap For Planning And Instruction , Maserati 300S: Second Edition , Notes On The Type, Time, Letters & Spirits ( Contemporary Condition #4 ) , Designing With The Body: Somaesthetic Interaction Design ( Design Thinking, Design Theory ) , Product Roadmaps Relaunched , Thinking Design , India On The Western Screen , Crayons And Ipads , An Introduction To Automated Process Planning Systems , Handbook Of Game-Based Learning , Driverless – Intelligent Cars And The Road Ahead , Vehicle Design , Data Visualization For Design Thinking , Design For Motion : Fundamentals And Techniques Of Motion Design , Digital Selling: How To Use Social Media And The Web To Generate Leads And Sell More , Ruined By Design: How Designers Destroyed The World, And What We Can Do To Fix It , Unity Game Development: Short And Easy Guide From The Very Beginning , Black Looks: Race And Representation (Revised) (2Nd Ed.) , Experience Deisgn , Handbook Of Antiblocking, Release, And Slip Additives (Revised) (3Rd Ed.) , Handbook Of Antistatics (2Nd Ed.) , Real Games: Whats Legitimate And Whats Not In Contemporary Videogames ( Playful Thinking ) , The Joy Of Search: A Google Insiders Guide To Going Beyond The Basics ( Mit Press ) , Material Noise: Reading Theory As Artists Book ( Mit Press ) , Economics After Neoliberalism ( Boston Review / Forum ) , Material And Mind ( Mit Press ) , How Smart Machines Think ( Mit Press ) , Sharenthood: Why We Should Think Before We Talk About Our Kids Online ( Strong Ideas ) , Being And The Screen: How The Digital Changes Perception. Published In One Volume With A Short Treatise On Design ( Design Thinking, Design Theory ) , Innovation + Equality: How To Create A Future That Is More Star Trek Than Terminator ( Mit Press ) , The Artist In The Machine: The World Of Ai-Powered Creativity ( Mit Press ) , Bauhaus Futures ( Mit Press ) , Being Material ( Mit Press ) , We Are In Open Circuits: Writings By Nam June Paik ( Writing Art ) , Changing Minds: How Aging Affects Language And How Language Affects Aging ( Mit Press ) , Curating After The Global: Roadmaps For The Present ( Mit Press ) , Marcel Duchamp And The Art Of Life ( Mit Press ) , Ogilvy On Advertising In The Digital Age , Brand The Change: The Branding Guide For Social Entrepreneurs, Disruptors, Not-For-Profits And Corporate Troublemakers , Junior: Writing Your Way Ahead In Advertising , Marc Newson Works , Design Management , The Cambridge Handbook Of The Neuroscience Of Creativity , Creative Metal Forming , The Literature Review: A Step-By-Step Guide For Students , Doing Your Literature Review : Traditional And Systematic Techniques , The Literature Review : Six Steps To Success , Doing Litreatture Revuiew 02Nd Edt , Consumer Behavior And Culture , Doing Digital Methods , Documentary Research In The Social Sciences , Consumer Behaviour , Managing Quality In Qualitative Research , Digital Marketing , Doing Educational Research , Research Methods For Cognitive Neuroscience , Conducting Research Literature Reviews , Writing And Doing Action Research , Applying Critical Thinking And Analysis In Social Work , Real Research , Conducting Educational Research , Material Methods , Experimental Evaluation Design For Program Improvement , Using Stata For Quantitative Analysis , Political Science Research Methods , Understanding Social Media , Gathering Social Network Data , Practical Mapping For Applied Research And Program Evaluation , Introduction To Ethnographic Research , A Very Short, Fairly Interesting, Reasonably Cheap Book About... International Marketing , Doing Ethnographic Research , Visual Communication , Writing Ethnographically , The Sage Handbook Of Inclusion And Diversity In Education , Managing Change In Organizations , The Sage Handbook Of Visual Research Methods , Programming With Python For Social Scientists , Your Research Project , Criminological Ethnography: An Introduction , Research Methods In Accounting , Digital Play In Early Childhood , Participatory Research , Researchers And Their Subjects: Ethics, Power, Knowledge And Consent (Paperback) , Grantsmanship , Interpretive Interactionism , Randomized Experiments For Planning And Evaluation , Curious Boym: Design Works , Printing Architecture: Innovative Recipes For 3D Printing , Complete Design Thinking Guide For Successful Professionals , Instant: The Story Of Polaroid , Coffee Lids: Peel, Pinch, Pucker, Puncture , Everything Is Easy , Who Built That? Bridges: An Introduction To Ten Great Bridges And Their Designers , Think Smarter: Critical Thinking To Improve Problem-Solving And Decision-Making Skills , Brain Power: Learn To Improve Your Thinking Skills , Digital Design Essentials: 100 Ways To Design Better Desktop, Web, And Mobile Interfaces , The Maker Movement Manifesto: Rules For Innovation In The New World Of Crafters, Hackers, And Tinkerers , Andrea Pichl ( Sternberg Press ) , Machine Learning , Self-Tracking , The Mind-Body Problem , Moocs , Information And Society , Extremism , Synesthesia , The English Lakes (Blacks Sketchbooks) (Hardcover) , Stratford-On-Avon (Blacks Sketchbooks) (Hardcover) , Stone Lithography (Printmaking Handbooks) (Paperback) , Ordinary Differential Equations , Deconstructing Product Design: Exploring The Form, Function, Usability, Sustainability, And Commercial Success Of 100 Amazing Products (Hardcover) , The Art Of Watch Dogs (Hardcover) , The Art Of John Alvin (Hardcover) , The Urban Sketching Handbook: Architecture And Cityscapes: Tips And Techniques For Drawing On Location , The Collectors Logbook (Hardcover) , Interaction Design: From Concept To Completion (Paperback) , Python Machine Learning Case Studies: Five Case Studies For The Data Scientist , Create To Conquer , Engineering Analysis With Solidworks Simulation 2019 , The Essential Drak Room , What Do I Teach Readers Tomorrow? Fiction, Grades , Thoughts On Interaction Design , Volkswagen In India, At 10 , Research Design 4Th Edition , The Life Of Y , Global Value Chains In A Changing World (Paperback) , The Future Of Branding , Interactionism , Art History In The Wake Of The Global Turn ( Clark Studies In The Visual Arts ) , Paper Relief Art Chinese Style: Cutting, Folding, Molding And More ( Contemporary Writers From Shanghai , Damn Good Advice (For People With Talent!) : How To Unleash Your Creative Potential By Americas Master Communicator, George Lois , Vitamin D3: Todays Best In Contemporary Drawing , The High Line , How To Be Yourself : Life-Changing Advice From A Reckless Contrarian , Engaged: Designing For Behavior Change , The Dynamics Of Social Practice , Social Work , Social Work Practice With Children And Families , Sage Secondary Data Analysis , Research Methods Management , Researching Organizations , Bamboo And Cane Crafts Of Northeast India , Study Skills For Business And Management , Critical Learning For Social Work Students , Research Ethics In Practice , The Sage Handbook Of Gis And Society , Basics To Production And Manufacturing Of Alcohol: Basics To The Elaboration Of Ethanol, Gasohol, E10, E20 And E85 Fuels. , How To Fuel Your Vehicles With The Power Of Ethanol: Introductory Manual To The Elaboration Of Ethanol, Gasohol, E10, E20 And E85 Fuels Paperback , Duckweed Ethanol: Duckweed Biomass Grown From Organic Wastes To Replace Corn For Us And International Ethanol Biofuel Production , Blockchain City: Community, Technology, And Meaning , Performance Analysis Of Newly Developed Hybrid Evaporative Cooling , Giacometti;: A Sketchbook Of Interpretive Drawings , Interprofessional Social Work , Magazine Journalism , Teaching Quantitative Methods , Key Concepts In Leadership , Design Concept For Enginers , Timeless Mahindra , Introduction To Fuzzy Logic Using Matlab , In Silico Medicinal Chemistry: Computational Methods To Support Drug Design , Josef Albers Glass Color & Light , Bicycle Design – An Illustrated History (Paperback) , The Best Interface Is No Interface: The Simple Path To Brilliant Technology ( Voices That Matter ) , Foundations Of Machine Learning, Second Edition ( Adaptive Computation And Machine Learning ) (2Nd Ed.) , Deluxe: How Luxury Lost Its Luster , Smashing Ux Design , Muji Brands A To Z , Blind Spot Illuminating The Hidden Value Of Business , Meeting Design: For Managers, Makers, And Everyone , Liminal Thinking: Create The Change You Want By Changing The Way You Think , 101 Ux Principles A Definitive Design Guide , The Users Journey: Storymapping Products That People Love (Paperback) , Doorbells, Danger, And Dead Batteries: User Research War Stories , Project Management For Humans: Helping People Get Things Done: 1 (Paperback) , Enchanted Ground: André Breton, Modernism And The Surrealist Appraisal Of Fin-De-Siècle Painting , Wood Engraving: How To Do It , Design Futuring: Sustainability, Ethics And New Practice , Sound Theory/Sound Practice , Design Anthropological Futures , Reinventing Print : Technology And Craft In Typography , Microeconometrics Using Stata: Revised Edition (Paperback) , Publication Design: Guide To Page Layout , Indian Anthropometric Dimensions For Ergonomic Design Practice , Design Research Now : Essays And Selected Projects , Mental Models : Design Of User Interaction And Interfaces For Domestic Energy Systems , Remixthecontext , Rapidly Prototyping Interfaces With Indesign , Art Of Animation: Disneys Art Of Animation #1 (Disney Editions Deluxe (Film)) , Red Dot Design Yearbook 2018/2019 : Living, Doing, Working & Enjoying ( 04 Book Set) , Red Dot Design Yearbook 2018/2019 : Living , Red Dot Design Yearbook 2018/2019 : Doing , Red Dot Design Yearbook 2018/2019 : Working , Red Dot Design Yearbook 2018/2019 : Enjoying , Rethink Design Guide , Induction Machines Handbook , Design-Build , Visual Communication For Architects And Designers , Executing Design For Reliability Within The Product Life Cycle , Emotional Labor In Work With Patients And Clients , Designed To Sell , Design For Global Challenges And Goals , Sustainable Product Design And Development , Sustainable Manufacturing , Spark Erosion Machining , Teaching And Designing In Detroit , A Complete Guide To Wireless Sensor Networks , Additive Manufacturing, Second Edition , Artificial Intelligence In A Throughput Model , Healthy Worker And Healthy Organization , Machine Learning For Healthcare , Micromechatronics, Second Edition , Learning To Teach Design And Technology In The Secondary School , The Fundamentals Of Event Design , Cycling , Innovation , Progressive Studio Pedagogy , Human Performance In Automated And Autonomous Systems , Human Performance In Automated And Autonomous Systems , The Engineering Design Primer , Big Data, Iot, And Machine Learning , New York In Cinematic Imagination , The Design, Implementation, And Audit Of Occupational Health And Safety Management Systems , Applied Machine Learning For Smart Data Analysis , Additive Manufacturing And 3D Printing Technology , Techniques For Ship Handling And Bridge Team Management , Human Factors In Aircraft Maintenance , Sustainable Entrepreneurship, Renewable Energy-Based Projects, And Digitalization , Modernizing Costume Design, 1820–1920 , Designing Displays For Older Adults, Second Edition , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi , Data Science For Wind Energy , The Professional Skills Handbook For Engineers And Technical Professionals , Design And Spirituality , Programming Media Art Using Processing , An Introduction To Design And Culture , Metaphor , Database Modeling Step By Step , Computational Advertising , Designing Engineering Structures Using Stochastic Optimization Methods , Design And Political Dissent , Narrative Environments And Experience Design , The Ontology Of Design Research , Advice For The Novice Investigator , Electrodissolution Processes , Privacy Vulnerabilities And Data Security Challenges In The Iot , Bayesian Applications In Pharmaceutical Development , Delay And Disruption Tolerant Networks , Problematic Research Practices And Inertia In Scientific Psychology , Design For Sustainability , The Wonderful World Of Wearable Devices , Seeing Things: Television In The Age Of Uncertainty , A Participatory Action Research Case Study: Designing For A Transformative Service Experience With A University Graduate Student Governance Organization , Reinforcement Learning For Cyber-Physical Systems , Digital Creature Rigging , Design In Crisis , Drawing Parallels , Safety Leadership , Bullying And Harassment In The Workplace , Teaching Landscape , The Data Storytelling Workbook , Teaching Science And Technology In The Early Years (3–7) , Firefighters Clothing And Equipment , Thinking Design Through Literature , Contemporary Processes Of Text Typeface Design , Wpa Posters In An Aesthetic, Social, And Political Context , A Guide To Active Working In The Modern Office , Materials For Engineers And Technicians , Mathematics And Programming For Machine Learning With R , Introduction To Autocad 2020 , Ethical Design Intelligence , Planetary Gear Trains , Precision Metal Additive Manufacturing , Smart Cmos Image Sensors And Applications , Iot , A Tour Of Data Science , Gardens And Human Agency In The Anthropocene , Beautiful Users: Designing For People , Changing Thingsl The Future Of Objects In A Digital World , Porsche 911 : The Ultimate Sportscar As Cultural Icon , Visual Ethics , Visual Culture , Developing Creative Thinking In Beginning Design , Human Computer Interactions: Fundamentals And Practice , Petroleum Reservoir Management: Considerations And Practices , Moving Wearables Into The Mainstream: Taming The Borg , Getting The Picture: The Visual Culture Of The News , Thinking Visually For Illustrators , Tricky Design : The Ethics Of Things , Car Cultures , Design Philosophy Reader , Graphic Thinking For Architects & Designers , Thonik: Why We Design , How To Make Animated Films : Tony Whites Complete Masterclass On The Traditional Principals Of Animation , Will You Marry Me , No One Missing–Playfonts , Touch Branding , Patterns In Graphics , Merge--Art,Craft,Design , International Yearbook Brands & Communication Design 2019/2020 , The Book Of Possibilities , Homo Ex Data: The Natural Of The Artificial , Theform Of Success - Design As A Corporate Strategy , A Map Of The World: The World According To Illustrators And Storytellers , Design Tools For Evidence-Based Healthcare Design , 100 Ways To Draw A Bird And Make A Living From Illustration , Seeing Around Corners: How To Spot Inflection Points In Business Before They Happen , Structured Search For Big Data , Data Analysis In The Cloud: Models, Techniques And Applications , Electric And Hybrid Vehicles: Design Fundamentals, Second Edition , Integrating Human Factors Methods And Systems Thinking For Transport Analysis And Design , Doing Your Research Project: A Guide For First-Time Researchers , Building Platonic Solids: How To Construct Sturdy Platonic Solids From Paper Or Cardboard And Draw Platonic Solid Templates With A Ruler And Com (2Nd Ed.) , Origami Design Secrets : Mathematical Methods For An Ancient Art, Second Edition , Universal Design For Learning , A Typographic Workbook: A Primer To History, Techniques, And Artistry (2Nd Ed.) , Superhumanity: Design Of The Self , Connections : The Works Of Charles And Ray Eames , Hidden - Unveiling Japanese Design (Curated By Nendo) , Design And Futures , Design , Access By Design , Gaston Grümmer, The Art Of Carrosserie , Gaston Grümmer, The Art Of Carrosserie , Leo Alderbarn The Creature , Present Tense: A Poetics , Rolls Royce Phantom Ii Continental , Renny Ramakers Rethinking Design-Curator Of Change , Exploring Black And White: Drawing And Painting Techniques , The Republic Of Tea: : The Story Of The Creation Of A Business, As Told Through The Personal Letters Of Its Founders , The Past Before Us : Historical Traditions Of Early North India , Graphics Design Annual 2006 , Digital Dreams : The Work Of The Sony Design Center , Knife, Fork, & Spoon : Eating Around The World , Acrylic For Sculpture And Design , Usability And The Mobile Web , Deterioration Of Electrical Equipment In Adverse Environments , Are You An Inclusive Designer?- 1St Ed , Blockchain: Transforming Your Business And Our World (Original Price £ 30.99) , Creating Emotionally Intelligent Workspaces , Creative Workflow In Lightroom: The Photographer’S Guide To Managing, Developing, And Sharing Your Work , Designing With Society , Modern Post: Workflows And Techniques For Digital Filmmakers , What Is Information? , Handmade Pixels , The Social Construction Of Technological Systems: New Directions In The Sociology And History Of Technology (Anniversary) ( Mit Press ) , Leonardo Da Vinci: A Life From Beginning To End ( Biographies Of Painters #1 ) , Methods Of Social Research, 4Th Edition (4Th Ed.) , Collaborative Product Design: Help Any Team Build A Better Experience , Rethinking Sitting , Iconix: Exceptional Product Design , The Big Book Of Design Ideas (Revised) , Michael Graves: Design For Life , Plydesign: 73 Distinctive Diy Projects In Plywood (And Other Sheet Goods) , Regional Product Packaging , Red Dot Design Yearbook 2020/2021: Living, Doing, Working & Enjoying Set , Living 2020/2021 , Doing 2020/2021 , Working2020/2021 , Enjoying2020/2021 , Optimum Type: Custom Typography Design And Application , Food Futures: Experimental Food Design , Simplicity: The Appeal Of Minimalism In Graphic Design , Art Of Folding 2: New Techniques And Materials. Fashion, Architecture, Interior And Product Design , Pop-Up Workshop For Kids: Fold, Cut, Paint And Glue , In Great Numbers : How Numbers Shape The World We Live In , Made In Denmark : Design Since 1900 , Theatre Histories: An Introduction , Design And Emotion , Human Factors Psychology : Volume 47 , Grant And Lee: A Study In Personality And Generalship , Spelunky ( Boss Fight Books #11 ) , Frank Lloyd Wright: A Life ( Penguin Lives Biographies ) , The Four Lenses Of Innovation: A Power Tool For Creative Thinking (1St Ed.) , Maker-Centered Learning: Empowering Young People To Shape Their Worlds (1St Ed.) , Design Thinking ( 21St Century Skills Innovation Library: Makers As Innovators ) , Wabi-Sabi: Further Thoughts , Design Thinking In The Classroom: Easy-To-Use Teaching Tools To Foster Creativity, Encourage Innovation, And Unleash Potential In Every Student , Innovation Tools: The Most Successful Techniques To Innovate Cheaply And Effectively , Writing For Social Scientists: How To Start And Finish Your Thesis, Book, Or Article: Second Edition ( Chicago Guides To Writing, Editing, & Publishing ) (2Nd Ed.) , On Curating: Interviews With Ten International Curators , The Art Of Thinking In Systems: Improve Your Logic, Think More Critically, And Use Proven Systems To Solve Your Problems - Strategic Planning For Everyday Life. , The Face Of Change: Portraits Of Automotive Evolution , Star Sisters , 200% Cotton , Graphic Print Source : Volume 5 - Print Inspiration , Graphic Print Source: Vintage Prints Vol-6 + Cd Rom , Wrapping Paper Worldwide , The Photographic Eye: Guide For Teachers: Learning To See With A Camera , Understanding Photography , Digital Photographers Handbook (Hardcover) , Understanding Composition: The Complete Photographers Guide , Titans: Muhammad Ali And Arnold Schwarzenegger , Facing The Camera A History Of Nepali Studio Photography , Kathmandu A Pocketful Of Momos , Hamra Hajurama Our Grandmothers , Etan And Me , Visual Anthropology Photography As Research Method , The Birth Of The Idea Of Photography ( Ric Books (Ryerson Image Centre Books) ) , Portraits: The Worlds Top Photographers , Tulum Gypset , Environmentalism: A Global History , Design And Environment , How Users Matters: The Co-Construction Of Users And Technologies. , Small Is Beautiful: Economics As If People Mattered , Design With The Other 90% , Design For The Real World
Contract Date: Mar 30, 2022 Contract Value : ₹ 40.00 Lakh
Government Departments No of Bidders 3
Kerala View Result →
45.
Educational and Research Institute #974114 AOC
Supply Of Scientific Equipment To Centre Of Excellence Supply Of Scientific Equipment To Centre Of Excellence Of Govt . Brennen College - 2 Automated Capillary Electrophoretic Dna Sequencer Nshould Be A Fully Automated Multi-Capillary, Fluorescence-Based Genetic Analysis System And Must Have: N1. The System Should Be 4-Capillary Fluorescence-Based Capillary Electrophoresis System. N2. The System Must Be Able To Detect And Analyze 6 Fluorescent Dyes Simultaneously. N3. The System Should Have Solid-State Long Life Laser. N4. The System Should Use Integrated Cartridge Which Includes Polymer, Capillaries And Anode Buffer. N5. The System Should Use Universal Performance Optimized Polymer To Run Both Sequencing And Fragment Analysis Applications. N6. The System Software Should Support To Run Sequencing And Fragment Analysis Application On The Same Plate. N7. The System Should Use Rfid For Tracking And Reporting Of The Consumables. N8. The System Should Be Stand-Alone Instrument With Touch Screen Interface For Computer Independent Operation. N9. The System Should Contain On-Board Storage Capability With Memory Capacity Of At Least 128 Gb For Storing Approximately 3, 500 Injections Or 14000 Reactions. N10. The System Touch Screen Should Have Functionality To Create And Run Protocols; Load Run Files From Usb Or An Online Ecosystem; To Designate Destination Of Run Files To The Usb Port Or An Online Ecosystem; Pause And Resume The Run In Progress And Allow Users To Edit Sample And Target Assignments. N11. The System Software Should Be Designed With A Touchscreen Software Interface For Instrument Control To Regulate The Functions Of The Instrument, Automatically Perform Primary Analysis ( I.E, Base Calling And / Or Fragment Sizing ) And Provide Functionality For Real-Time Data Assessment As Well As The Ability To Generate Quality Control Reports. N12. The System Should Have Plate Manager Software That Allows For Run Set-Up Via The On Instrument Software, Cloud Or Personal Computer. N13. The System Should Be Cloud-Enabled To Set Up Run, Check Its Progress, And Access Data. N14. The System Should Be Capable Of Doing Sanger Sequencing Applications ( Re-Sequencing Ngs Confirmation, Indels; Heterozygote Detection; Minor Variant Detection ) And Fragment Analysis Applications ( Microsatellite Analysis, Compatible With Mlpa, Snapshot, Cell Line Authentication ) N15. The System Should Come With Secondary Analysis Software To Base Call, Trim, Display, Edit And Print Data. N16. The System Should Come With Secondary Analysis Software For Resequencing, Mutation Detection And Analysis, Snp Discovery And Validation, Allele Identification And Subtyping. N17. The System Should Come With Software Designed For Reference-Based And Non-Reference Based Analysis To Call Snp’S, Insertions And Deletions . The System Should Have Software For Accurate Detection And Reporting Of Minor Variants With Detection Level As Low As 5%. N18. The System Should Come With Genotyping Software That Provides Dna Sizing And Quality Allele Calls. N19. The Vendor Should Attach At Least 50 User List And 5 Satisfactory Report For Genetic Analyzer N20. The Vendor Should Have Fully Functional Lab For Providing The Efficient After Sales And Service Support. N21. A Dedicated Desktop With Latest Configuration Should Be Supplied Along With The System. N22. Consumables And Cartridges For Running 1000 Samples Should Be Quoted Along With The System. N23. 3Years Warranty / Cmc And 2Years Extended Amc Statement Were Expected 3 Real Time Pcr System Na Dedicated Multicolor Real Time Pcr System ( Excitation And Emission ) With Latest Generation Peltier-Based 96-Well Plate / Tube In-Built Pcr To Support: A. Gene-Expression Analysis, B. Pathogen Quantitation, Nc. Snp Genotyping, D. Plus / Minus Assays That Utilize Internal Positive Control, E. Dissociation Curve Analysis, F. Multiplexing And Complete End-Point Assays. G. Microrna Profiling. N2. Led Light Source For Excitation. 3. Machine Should Have 3 Coupled Filters For Optical Detection. 4. Multiplexing Should Be Minimum 3 Targets / Well. 5. Machine Must Have 2D Barcode Reading Facility ( Optional ) N6. Peltier Base Heating And Cooling Method7. Temperature / Method Optimization : Isothermal N8. Imaging System : Cmos / Ccd / Photodiode9. Dynamic Range : 10 Log 10. Temperature Uniformity : 0.4 °C 11. Temperature Accuracy : 0.25°C 12. System Should Have Block Ramp Rate : 3.5°C Or More N13. Run Time Should Be Less Than 45 Mins 14. Number Of Copies : 1 Copy 15. Sensitivity : Detect Differences As Small As 1.5-Fold In Target Quantities In Singleplex Reaction 16. System Should Be Wifi Enabled To Access And Share Data Anywhere And Anytime. 17. Total Reaction Volume Range 10 Ulu To 100 Ul For 96 Well Plate. 18. Computer: A Business Line Computer ( Desktop ) With Latest Computer Specifications Should Be Provided With The System. N19. The Amplification Traces Viewed On The Lcd Screen In Real Time While A Run Is In Progress With Touch Screen Facility. N20. The Supplier Should Be Able To Supply All The Reagents And Consumables For The Operation Of The System N21. Along With Installation, Extensive Training Must Be Provided. N22. Programmable Pause And Power Interruption Recovery Options Should Be Available. N23. Pin Protected Multiple User Accounts For Data Safety And Locked Templates Should Be Available. N24. Application Software Like Dedicated Primer And Probe Design Software As Well As Relative Quantitation Analysis Software To Analyze Multiple 96-Well-Plates Of Data Simultaneously Must Be Included As Standard Supply In The Quoted Price – ( Optional ) . N 25. Factory Calibrated System For Quick Setup. N26. The Vendor Should Have Minimum 5 Installations In The Past 3 Years. N27. A Dedicated Desktop With Latest Configuration Should Be Supplied Along With The System With Optical R / W Drive. N28. 3Years Warranty / Cmc And 2Years Extended Amc Statement Were Expected 4 Modular Quaternary High Performance Liquid Chromatography ( Hplc ) System. Nhplc System Consisting Of Quaternary Gradient Pump, Auto Sampler, Online Degasser, Column Oven, Diode Array Detector, Software And Accessories. N Quaternary Gradient Pump:4-Channel Facility In Pump With Serial Pistons, Able To Work As Isocratic, Binary, Ternary And Quaternary Mode., Automatic Gradient Profiles Facility Nproportionating Precision: ± 0.15% Or Less , Proportionating: 5 To 95% , Proportionating Accuracy: ± 0.5% Or Better, Operating Flow Range: 0.01 - 10.00 Ml / Min, In 0.01 Increments Noperating Pressure Range : 620 Bar Maximum Or Better For The Entire Range, Flow Precision: 0.1% Rsd , Flow Accuracy: ± 1%, Degasser: Inbuilt On Line Degasser With 4 Channels For Solvent Degassing. Nmaximum Operating Flow Rate Should Be Up To 10Ml / Min Or More Per Flow Line, Photo Diode Array Detector:, Photodiodes: 1024 Diodes, Band Width: 4 Nm Or Lesser, Wavelength Range: 190-800Nm Nlight Source: Pre-Aligned Deuterium Lamp And Tungsten Lamp, Wavelength Accuracy: ±1 Nm Or Better, Digital Resolution: <1 Nm / Pixel, Linearity Range: < 5% Rsd And Corr. Coeff. ³ 0.999 Up To 2.0 Au Nbase Line Noise: ± 8Μau Or Better, Drift: = 1.0X10-3 / Au / Hr Or Better, Path Length: 10 Mm , Flow Cell Volume: = 13Ul Or Equivalent, Data Acquisition Rate: 100 Hz Or Better, Peak Purity, Peak Scanning Facility To Visualize Any Difference In Spectra To Find Out Multiple Up To 4 Co Eluting Impurity With Retention Time. Nsoftware : To Control, Acquisition, Online Display, Processing Peak Point Integration And Reporting Hplc Data, Full 64 - Bit Architecture Software, Windows 10 / 8 Compatible Environment Or Suitable, Data Reports, Online Help And Wizards, Data Integrity, Advanced Security, Audit Trials, System Suitability Min 5 Parameter Can Be Checked , Template Saving & Auto Run Of Templates , Calibration Curves Facility Nsystem Suit Formula Facility , Facility For Data Security, Audit Trails And Electronic Signatures Etc., Should Be Available For Glp And 21 Cfr Compliance. Nsingle Point Control Of The Entire Hplc., Iq Oq Of The Hplc And Software System Must Be Done. , Columns ( Pore Size 5 Μ ) :, ( I ) C-18 Column : 1 Nos. _250X4.6 Mm, 5U Nsuitable Pc & Printer With Below Specifications To Be Supplied: Processor - Intel I5 ( 5Th Generation ) ; Ram - 8 Gb ; Hard Disk - 1 Tb ; Graphic Card; Dvd Writer; 17” Tft Screen ; Lan Port ; Usb 2.0, 4 Ports ; Wi-Fi ; Multimedia Keyboard ; Optical Mouse, Rewritable Dvd, Operating System : Genuine Windows 10 Ultimate With Media And Documentation And Certificate Of Authenticity. Preloaded Latest Licensed Antivirus Software. Printer- Laser Printer Monochrome., Warranty : 3Years Warranty / Cmc And 2Years Extended Amc Statement Were Expected , All Necessary Accessories For The Full Fledge Working Of The Instrument To Be Quoted, The Supplier Should Have Installed Minimum 5 Nos Of The Quoted Model In Kerala Preferably , In Government Institutions. Installation Details To Be Enclosed Along With The Contact Details. Nthe Supplier Should Have Service Facility In Kerala To Render Prompt After Sales Service. N 5 Laminar Air Flow -Vertical With Ce Mark N1. Basic Elements: Prefilters, Heavy Duty Blower Assenbly, Hepa Filter Etc. N2. Filteration Process: Fresh Air Is Drawn Through The Pre- Filter And Passes Through Hepa Filter Having Efficiency Rating As High As 99.99% With Cold Dop And 99.97% With Hot Dop, Thus Retaining All Airborne Particle Of Size 0.3 Micron And Larger. N3. Construction: Made Of Good Quality Sheet Steel With Steel Reinforcements All Powder Coated. N4. Filteration: Hepa Filter Deep Pleat Of High Efficiency And Quality Marked Like Ce N5. Work Table Top: High Quality Stainless Steel Matt Finished N6. Side Panels: Made Of Good Quality Melamine / Acrylic N7. Blowers: Noiseless High Quality Blowers N8. Air Velocity: 90Ft / Min Uv Tube Manometer Gascock Chamber Size:4 X 2 N9. Certifications : 1. Ce Certified 2. Iso 13485: 2003 ( Medical Devices ) 3. Iso 9001: 2015. N10. 3Years Warranty / Cmc And 2Years Extended Amc Statement Were Expected 6 Co2 Incubator N1. The Incubator Chamber Is Constructed Entirely Of Polished, Corrosion Resistant Stainless Steel With Coved Corners To Simplify Cleaning And Decontamination Practices To Minimize The Potential For Unwanted Contamination. N2. Lightweight Direct Heat Design Surrounds Sides, Back, Top, And Bottom Of Chamber With High Efficiency, Quick Response Heating Elements. N3. Large Interior Chamber Capacity Of Above 180 Liters , N4. Sturdy Modular Stainless Steel Shelving And Supports Which Can Be Readily Assembled And Removed Without Use Of Tools. N 5. An In-Chamber Hepa Filtered Airflow System Within The Culture Environment, Continuously Filters The Entire Chamber Air Volume Every 60 Seconds N6. Superior Class 100 Clean Room Air Quality Is Achieved Within The Culture Chamber In Under 5 Minutes After A Door Closing. N 7. High Temperature Sterilization Function With Exposure To 140°C, To Eliminate Bacteria, Mold, Yeast, Mycoplasma And Even Resistant Spores, Within A 12 Hour Total Process Cycle. N8. The Incubators On-Board Contamination Control Technologies Have Been Validated By Independent Third Party Testing Facilities And Documented In Published Works. N 9. An Exclusive Filtered Air Exchange System Within The Incubator Minimizes The Risk Of Condensation. Na Heated Outer Door Design Facilitates Quicker Recovery To Desired Set Temperature Following Door Openings While Minimizing Resultant Condensation Found On The Glass Of Incubator. N10. The Unit Incorporates High Quality Microbiological Filters On All Gas Inlets, Outlets, And Sample Ports. N The Incubator Should Be Capable Of Being Supplied With A Choice Of Either Highly Stable And Long Lasting Tc Gas Sensor Or Enhanced Sensitivity Ir Sensors. N11. Unit Incorporates An Advanced Microprocessor Based Control And Monitoring System Featuring An Easy To Navigate Alphanumeric Messaging Center, With Individual Displays For Temperature, C02, To Simplify Observation From A Distance And Ease Of Operation For All Users. N12. All Control And Measurement Probes And Sensors Are Located Directly Inside The Culture Chamber To Provide True And Accurate Process Data And Foster Faster Parameter Recovery Times Than Possible With Remotely Located Sensors Outside The Chamber. N13. Incubator Should Provide Field Reversible Inner And Outer Doors, Simplifying Choice Of Preferred Configuration For Use In Any Laboratory Environment. N14. Units Are Readily Stackable With Easy To Install Hardware Provided As Standard, To Insure Stability Of The Stacked Configuration While Maximizing Available Lab Space. N15. Incubator Is Equipped With Programmable Tracking Alarms For Critical Temperature And Co2 Control Parameters, Which Can Be Custom Configured To Meet The Needs Of Changing Research Requirements. The Unit Incorporates A Convenient Automatic Electronic Start Up Function Complete With Auto Zeroing Capability To Assure Proper Calibration Without Time Consuming Manual Measurement And Adjustment, Prior To Loading With Cultures. N16. Incubator Is Ul Listed, Csa Certified, And Ce Marked. N17. 3Years Warranty / Cmc And 2Years Extended Amc Statement Were Expected 7 Automatic Weather Monitoring Station Nmeteorological Sensors / Measurements: N1. Air Temperature Sensor : Range - 40 °C To + 65°C Accuracy ± 0.1° Resolution 0.1° C Units Of Measure °C. N2. Relative Humidity Sensor Parameters: Values Range 0 To 100% Rh Accuracy ± 2 N3. Barometric Pressure Sensor Parameters: Values Range 650 – 1100 Hpa Accuracy ± 0.3 Hpa. Anemometer ( Wind Sensor ) Parameters: Values Range ( Wind Speed ) 0.5 To 60 M / Sec Accuracy ±0.3 M / Sec ( = 10 M / Sec ) And ± 2% ( = 10 M / Sec ) Resolution 1.0 Unit Units Of Measure Wind Speed: M / S And Km / H. N4. Wind Direction: Range 0 – 360° Accuracy ± 0.1° Units Displayed East, West, North, South, N-E, N-W, S-E & S- W. N5. Rain Fall Sensor Parameters: Values Type Size: Professional Quality Tipping Bucket Rain Gauge Or Impact Sensor Or Optical Sensor Accuracy 0.1 Mm Resolution 0.25 Mm Precipitation Per Measurement Units Of Measure Rain-Rate In Mm / Hr And Rainfall Accumulation Measurement Data Rate Configurable Rate ( 1S, 10S, 61M Etc. ) N6. Data Collection Platform: Gps Based Digital Data Logger With Inbuilt Memory And Support For Using External Memory Like Pen Drive. Data Storage For Minimum 30 Days And Data Backup Facility Data Logger Should Provide Site Location And Timing Information. N7. Output Interface: Rs232 / Rs422 And Ethernet N8. Power Supply: 210 To 240Vac, 50 Hz N9. Battery Backup: Internal Battery Of Sufficient Capacity To Be Provided For Minimum Backup Of 12 Hours. Battery Charging / Regulator With Charge / Recharge Control And Deep Discharge Protection To Be Provided. N10. Operating Temperature -35°C To +70°C N11. Protection Class Ip65. N12. Operating Humidity 0% To 100% Humidity N13. Enclosure Material Acid-Proof, Rust-Proof And Uv Stabilized. N14. Sensor Module Software: Vendor Shall Provide Real-Time Display Software. It Should Be Capable Of Retrieving The Data From The Solid State Recorder And Present The Data In Excel Importable Format. The Software Should Also Generate Reports ( Daily / Weekly / Monthly And Yearly ) In Word Or Pdf Format. General Instructions: Vendor Shall Provide Initial Installation And Setup Of The Equipment. Necessary Interface And Data Cables To Be Provided. N15. Direct And Diffused Solar Flux Detectors N16. Soil Temperature And Water Content Sensors Up To A Depth Of 5 To 10 Meters N17. Onsite Demo And Training Should Be Provided N18. 3Years Warranty / Cmc And 2Years Extended Amc Statement Were Expected
Contract Date: Jul 08, 2020 Contract Value : ₹ 90.73 Lakh
Local Bodies No of Bidders 5
Kerala View Result →
46.
Educational and Research Institute #172757 AOC
Library Books Supply Of Library Books , Civil Engineering Material , Construction Management &Pwd Account , Transportation Engineering , Steel Structures ( Design & Drawing ) , Railways Bridges And Tunnels , Earthquake Resistant Building Cons. , Geotechnical Engineering ( Soil Mechanics ) , Strength Of Materials , Fundamentals Of Structural Analysis , Elements Of Bridge Engineering , Laboratory Manual Of Civil Engineering Students , Traffic Design , Conceptual Design Of Bridges , Bridge Culture , Bridge Structural Systems , Glimpses Of Worlds 100 Bridges , Disaster Management , Prestressed Concrete Analysis And Design , Within 20 Hours Teach You To Understand Building Electrical Construction Drawings , Within 20 Hours Teach You To Understand Building Water Supply, Drainage & Heating , Trb Civil Engineering , Civil Engineering Objective Type Questions , Tnpsc Ae Civil , Civil Engineering Objective Type Questions , Civil Engineering Objective Paper Vol I & Ii , Hand Book On Civil Engineering , Made Easy Gatge 2022 Civil , General Studies 2022 , Electronics Devices And Circuits , Linear Integrated Circuits , Electronic Measurements & Instrumentation , Fundamentals Of Electronics Devices , Electronics Instrumentaion & Measurements , Electronics Measurements & Instrumentation , Elements Of Analog Electronics , Fundamentals Of Electronics Devices & Circuits , An Integrated Course In Electronics & Communication Engineering , Analog Electronics , Electronic Devices & Circuits , Signal & Systems , Op-Amps & Linear Integrated Circuits , Fundamentals Of Digital Communication , Digital Communication , Digital Siganl Processing , Fundamental Of Signal & Systems , Communication Engineering , Digital Electronics And Logic Deisgn , Wireless Communication Systems , Wireless Communication Systems , Switching Theory And Logic Design , Wireless Communications , Network Analysis & Synthesis , Consumer Electronics , Question Bank Electronics & Communication Engineering , Optical Fiber Communication , Tv And Satellite Communications , Vlsi ( Technology, Design & Basics Of Microelectronics , Vlsi Deisng ( With Vhdl ) , 8051 Microcontroller , Digital Electronics , Vlsi Design , Introduction To Microprocessors & Interfacing , Fundamentals Of Television & Radar Engineering , Television & Radar Engineering , Atm Networks , Transducers Sensors & Display Systems , Medical Electronics , Sensors And Instrumentation , Digital Circuit Systems Using Vhdl , Vlsi Design , Basics Of Vlsi Design With Vhdl , Fundamentals Of Radar & Navigation , Wireless Sensor Networks , An Insight To Matlab & Simulink , Digital Image Processing , Embedded System & Microcontroller , A Course In Electricaltechnology , A Course In Power Systems , Utilization Of Electric Power & Electric Traction , Utilization Of Electrical Energy And Traction , Switchgear & Protection , A Course In Ellectrical Installation Estimating & Costing , Transmission & Distribution Of Electrical Power , Basic Electrical Engineering , Basic Electricity , Electrical Machines I , Electrical Machines Ii , An Intregrated Course In Electrical Engineering , Electromechanical Energy Conversion I , Electromechanical Energy Conversion Ii , Electrical Machines ( Ac, Dc Machine ) , Elements Of Power Systems , Fundamentals Of Switchgear & Protection , Power System Analysis , Electrical Engineering Materials & Semiconductor Devices , Basic Electrical & Electronics Engineering , Power System & Protection , Installation Commissioning & Maintain Of Elect. Equip , Electrical Measurement & Measuring Instruments , Modern Electric Traction , Utilization Of Electric Energy , Transmission & Distribution , Sub-Station Engineering Design , Concepts & Computer Applications , An Introduction To Electric Traction , High Voltage Engineering , Ehv-Ac, Hvdc Transmission And Distribution Eingineering , Power Quality , Scada And Energy Management System , Computer Aided Design Of Electrical Machines , A Textbook Of Power Sustem Operation And Control , Fundamentals Of Smart Grid Technology , Non Conventional Energy Sources , Bio-Medical Instrumentation , Fundamentals Of Entrepreneurship , Entrpreneurship Development And Small Business Enterprises , Energy Conservation & Audit , Energy Technology , Computer Networks , Industrial Robotics ( 5P ) , Mechatronics:Electronic Control Systems In Mechanical &Eletrical Engineering , Refrigeration & Air Conditioning- Fourth Edition , Mechanical Measurements And Instrumentation ( Including Metrology And Control Systems ) , Operations Research , Design Of Jigs, Fixtures Abd Press Tools , Press Tools Design And Construction , Process Planning And Cost Estimation , Practical Non Destructive Testing , Mechanical Engineering Objective Type Book ( Latest Edition ) , Objective Arithmetic ( Ssc & Railway Exam Special ) , Robotics And Industrial Automation , Additive Manufacturing , Tool Engineering , Tool Engineering And Desig , Engineering Metrology And Measurements , Electric And Hybrid Vehicles , Programmable Logic Control => Limited
Contract Date: Nov 02, 2021 Contract Value : ₹ 1.29 Lakh
Government Departments No of Bidders 3
Tamil Nadu View Result →
47.
Power #147236 AOC
Monitoring Of Environment Parameters At Harduaganj Thermal Power Plant , Kasimpur , Aligarh , Uttar Pradesh , Testing Charges Of Effluent Analysis Including Heavy Metals As Per Minas/Cpcb For Thermal Power Plants As Per U . P . Pollution Control Board Norms . 05 Locations For 12 Months . , Testing Charges For Ground Water As Per Isi Standard Including Heavy Metals And Bacteriology Test At 06 Locations For 12 Months , Testing Charges Of Ambient Air Quality For Pm10 , Pm2 . 45 , So2 , Nox As Per Cpcb For 05 Locations For 12 Months . , Testing Charges For Ambient Air Quality For Pm10 , Pm2 . 5 , Pb , So2 , No2 , O3 , Nh3 , Co , C6 , H6 , As , Ni & Bap As Per Cpcb Guidelines . , Testing Charges Of Stack Emission , Monitoring For Co2 , Spm , So2 , Nox , And Co As Per Cpcb 3 Stacks Per Month For 12 Month , Testing Charges Of Stack Emission , Monitoring For Hg , F And Co As Per Cpcb And Pb , Ni And As 3Stacks Quarterly For 12 Months . , Environmental Audit Statement ( Half Yearly And Annual ) Including Fly Ash Metal Analysis . , Noise Monitoring At Work Zone Area Unit No . 8 , 9 , 5 And 7 ( Per Month ) Rest 3 Locations Out Side The Plant Quaterly .
Contract Date: Oct 08, 2020 Contract Value : ₹ 10.40 Lakh
Boards / Undertakings / PSU No of Bidders 7
Uttar Pradesh View Result →
TenderDetail
Loading tenders