View Bid Results For Any Time Payment Machine Tenders

We found 787 Bid Results related to any time payment machine tenders. You can find Contractor details who won any time payment machine tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–16 of 787 tenders matching your filters

Railways #11496338 AOC

Contract Date: Jul 06, 2026 Contract Value : ₹ 10.91 Crore

Government Departments No of Bidders 1

West Bengal View Result →

Housing Urban and Rular Development #11475953 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 5

Delhi View Result →

Railways #11433807 AOC

Contract Date: Jul 01, 2026 Contract Value : ₹ 1.26 Crore

Government Departments No of Bidders 1

Karnataka View Result →

Defence #11409082 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 10

Goa View Result →

Railways #11404973 AOC

Contract Date: Jun 29, 2026 Contract Value : ₹ 95.30 Lakh

Government Departments No of Bidders 1

Tamil Nadu View Result →

Railways #11350132 AOC

Contract Date: Jun 25, 2026 Contract Value : ₹ 1.05 Crore

Government Departments No of Bidders 1

Jharkhand View Result →

Tourism #11320518 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Uttar Pradesh View Result →

Public Administrative Department #11306280 AOC

Contract Date: Jun 22, 2026 Contract Value : ₹ 49.64 Lakh

Local Bodies No of Bidders 3

Maharashtra View Result →

Coal and Mines #11297160 AOC

Bids Are invited for Custom Bid For Services - Daily Assistance In Cleaning Of Drains Collection And Removal Of Garbage Brooming Of Roads Clearing Of Grass And Other Allied Cleaning Related Works At Indira Nagar Rajiv Colony And Gopal Nagar Colony Of Ghugus Sub Area Of W.. - Cleaning Of Drains, Including Removal Of Silt, Sludge, Garbage, Floating And Settled Waste, Uprooting And Disposal Of Vegetation/Weeds From Inside And Around The Drains (Upto 1M From Drain Edge) , Complete Cleaning Of Drain Bed, Sides And Edges, And Stacking/Loading/Disposal Of Removed Material At Designated Locations By Providing And Deploying Manpower, As Directed By The Engineer-In-Charge, Complete In All Respects.The Item Shall Include Deployment Of Minimum 5 (Five) Manpower Per Day, Shall Be Male Workers, Physically Fit And Experienced In Drain Cleaning Works. Minimum 300 M Of Drain Is To Cleaned Every Day Of Deployment Of Labours. Payment Shall Be Made After Ensuring Of Daily Cleanliness Of The Drain. All Labour Shall Be Provided With Necessary Hand Tools, Safety Gear And Equipment Required For Effective Execution Of The Work.Scope Of Work:- Frequency Is Considered Twice A Month For Drains Upto 750 Mm Width And Once A Month For Drains More Than 750 Mm Width To Maintain Periodicity Of The Cleaning. , Brooming Of Road Surface Including Side Berms Of All Roads In Indira Nagar, Rajiv Colony And Gopal Nagar Colony And Within The Premises Of Service Building & Other Places. Brooming And Cleaning Of Road Surface Including Clearing And Removing Of Vegetation Of Side Berms Of The Road Etc Complete Including Collection Of Garbage & Disposal Of Rubbish Beyond A Lead Of 2.5 Km Or Upto A Distance Of Dump Yard Etc Complete As Directed By Engineer Incharge.Note: A) The Periodicity For The Cleaning Of Roads Shall Be Thrice Every Two Month, Approximately (Upto 2000 Sqm Per Day).B) For Efficient And Periodic Cleaning Of Roads, One No. Of Manpower Should Be Deployed Daily. , Clearing Jungle And Grass, Bushes Including Uprooting Of Plants And Removal Of The Rubbish Up To A Distance Of 500 M Outside The Periphery Of The Area Cleared All Complete As Per The Instructions Of Engineer Incharge By Mechanical Means Using Grass Cutter Machine Or Any Other Machine As Per The Requirement Of The Site. Minimum 4 Number Of Manpower To Be Deployed For Job Including Skilled Manpower For Operation Of Tools/Machine.Scope Of Work:- Frequency Is Considered Three Times A Year To Maintain Periodicity Of The Cleaning. , Disposal Of Dead Animals Including Transportation To The Specified Place Making Earth Pit,Disposal Of Dead Animal Into The Pit With Adequate Quantity Of Salt,Lime And Bleaching Powder Etc And Refilling The Pit With Earth All Complete With Tools,Tackles & Consumables As Per Instruction Of Engineer Incharge. , Sweeping/Cleaning Of Roof/Terrace Surfaces, Collecting Debris, Removing Vegetation, Collecting To Nearest Dumping Point Upto 50 M Lead Including The Cost Of Labour, Helper, T&P (Ladder, Brooms, Baskets, Etc), Incidental Consumables And Safety/Ppe Kits, Contractor Profit And Other Accessories. All Complete As Per Instruction Of Engineer Incharge.Scope Of Work:- Frequency Is Considered Twice Times A Year To Maintain Periodicity Of The Cleaning. , Collection Of Garbage From Door To Door Through Rikshaw (Electrically/Mechanically Operated) Garbage Container & Disposal Of The Same Through Mechanised Vehicle Or Other Suitable Arrangement To The Specified Place, I.E. All Residential And Service Building At Indira Nagar, Rajiv Colony And Gopal Nagar Colony Of Wa, Within A Lead Of 2.5 Km Complete As Per Instruction Of Engineer Incharge. Minimum 2 No. Of Manpower To Be Deployed. (Minimum 2 Trips Per Day) , Carriage Of Material Over Distance Exceeding 0.50 Km. Including Loading And Unloading. Manure/Sludge/Garbage From Drain Cleaning And Other Cleaning Activities As Per Req Of Eic, Lead 2.5 Km

Contract Date: Ref. Documents Contract Value : ₹ 28.06 Lakh

Boards / Undertakings / PSU No of Bidders 5

Maharashtra View Result →

10.

Public Administrative Department #11290947 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 142

Uttar Pradesh View Result →

11.

Public Administrative Department #11286668 AOC

Contract Date: Jun 15, 2026 Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 10

Uttar Pradesh View Result →

12.

Railways #11285223 AOC

Contract Date: Jun 15, 2026 Contract Value : ₹ 7.62 Crore

Government Departments No of Bidders 1

Tamil Nadu View Result →

13.

Tourism #11266721 AOC

Contract Date: Jul 03, 2026 Contract Value : ₹ 5.42 Crore

Government Departments No of Bidders 2

Goa View Result →

14.

Railways #11265038 AOC

Contract Date: Jun 11, 2026 Contract Value : ₹ 2.22 Crore

Government Departments No of Bidders 1

Rajasthan View Result →

15.

Railways #11247848 AOC

Contract Date: Jun 09, 2026 Contract Value : ₹ 2.34 Crore

Government Departments No of Bidders 1

Tamil Nadu View Result →

16.

Coal and Mines #11217543 AOC

Bids Are invited for Custom Bid For Services - Daily Assistance In Cleaning Of Drains Collection And Removal Of Garbage Brooming Of Roads Clearing Of Grass And Other Allied Cleaning Works At Subhash Nagar And Gandhi Nagar Colony Of Ghugus Sub Area Of Wani Area - Cleaning Of Drains, Including Removal Of Silt, Sludge, Garbage, Floating And Settled Waste, Uprooting And Disposal Of Vegetation/Weeds From Inside And Around The Drains (Upto 1M From Drain Edge) , Complete Cleaning Of Drain Bed, Sides And Edges, And Stacking/Loading/Disposal Of Removed Material At Designated Locations By Providing And Deploying Manpower, As Directed By The Engineer-In-Charge, Complete In All Respects.The Item Shall Include Deployment Of Minimum 5 (Five) Manpower Per Day, Shall Be Male Workers, Physically Fit And Experienced In Drain Cleaning Works. Minimum 300 M Of Drain Is To Cleaned Every Day Of Deployment Of Labours. Payment Shall Be Made After Ensuring Of Daily Cleanliness Of The Drain. All Labour Shall Be Provided With Necessary Hand Tools, Safety Gear And Equipment Required For Effective Execution Of The Work.Scope Of Work:- Frequency Is Considered Twice A Month For Drains Upto 750 Mm Width And Once A Month For Drains More Than 750 Mm Width To Maintain Periodicity Of The Cleaning. , Brooming Of Road Surface Including Side Berms Of All Roads In Subhash Nagar And Gandhi Nagar Colony And Within The Premises Of Service Building & Other Places. Brooming And Cleaning Of Road Surface Including Clearing And Removing Of Vegetation Of Side Berms Of The Road Etc Complete Including Collection Of Garbage & Disposal Of Rubbish Beyond A Lead Of 3.5 Km Or Upto A Distance Of Dump Yard Etc Complete As Directed By Engineer Incharge.Note: A) The Periodicity For The Cleaning Of Roads Shall Be Thrice Every Two Month, Approximately (Upto 2000 Sqm Per Day).B) For Efficient And Periodic Cleaning Of Roads, One No. Of Manpower Should Be Deployed Daily. , Clearing Jungle And Grass, Bushes Including Uprooting Of Plants And Removal Of The Rubbish Up To A Distance Of 500 M Outside The Periphery Of The Area Cleared All Complete As Per The Instructions Of Engineer Incharge By Mechanical Means Using Grass Cutter Machine Or Any Other Machine As Per The Requirement Of The Site. Minimum 4 Number Of Manpower To Be Deployed For Job Including Skilled Manpower For Operation Of Tools/Machine. Scope Of Work:- Frequency Is Considered Three Times A Year To Maintain Periodicity Of The Cleaning. , Disposal Of Dead Animals Including Transportation To The Specified Place Making Earth Pit,Disposal Of Dead Animal Into The Pit With Adequate Quantity Of Salt,Lime And Bleaching Powder Etc And Refilling The Pit With Earth All Complete With Tools,Tackles & Consumables As Per Instruction Of Engineer Incharge. , Sweeping/Cleaning Of Roof/Terrace Surfaces, Collecting Debris, Removing Vegetation, Collecting To Nearest Dumping Point Upto 50 M Lead Including The Cost Of Labour, Helper, T&P (Ladder, Brooms, Baskets, Etc), Incidental Consumables And Safety/Ppe Kits, Contractor Profit And Other Accessories. All Complete As Per Instruction Of Engineer Incharge. Scope Of Work:- Frequency Is Considered Twice Times A Year To Maintain Periodicity Of The Cleaning. , Collection Of Garbage From Door To Door Through Rikshaw (Electrically/Mechanically Operated) Garbage Container & Disposal Of The Same Through Mechanised Vehicle Or Other Suitable Arrangement To The Specified Place, I.E. All Residential And Service Building At Subhash Nagar And Gandhi Nagar Colony Of Wa, Within A Lead Of 3.5 Km Complete As Per Instruction Of Engineer Incharge. Minimum 2 No. Of Manpower To Be Deployed. (Minimum 2 Trips Per Day) , Carriage Of Material Over Distance Exceeding 0.50 Km. Including Loading And Unloading. Manure /Sludge/Garbage From Drain Cleaning And Other Cleaning Activities As Per Req Of Eic, Lead 3.5 Km

Contract Date: Ref. Documents Contract Value : ₹ 25.74 Lakh

Boards / Undertakings / PSU No of Bidders 5

Maharashtra View Result →

17.

Railways #11215074 AOC

Contract Date: Jun 03, 2026 Contract Value : ₹ 1.32 Crore

Government Departments No of Bidders 1

West Bengal View Result →

18.

Railways #11204656 AOC

Contract Date: Jun 02, 2026 Contract Value : ₹ 12,980

Government Departments No of Bidders 1

Maharashtra View Result →

19.

Public Administrative Department #11202908 Technical Bid

Tender for Supply And Fixing Of Cloth Bag Vending Machine For Public Use Under Plastic Waste Management , Supply And Fixing Of Cloth Bag Vending Machine For Public Use Under Plastic Waste Management Specifications For Technical Specification Of Automatic Cloth Bag Vending Machine 1 Name Of Machine : Automatic Cloth Bag Vending Machine 2 Machine Type & Operation : Electronically Operated Automatic Cloth Bags Vending Machine, Dispense One Bag At A Time Through Motorized Spiral Mechanism 3 Payment Mechanism : Coin Acceptor:- The Electronic Coin Accepter Will Accept Multiple Coins In Single Slot Entry. It Is Accept All Denominations Of Coins. Coin Accepter Automatically Blocks Coin Entry When There Is No Stock. It Is Programmed With One Minute Transaction Time Out Function For Inserting Coins Of Different Denominations Note Acceptor:- It Can Be Accept Different Kinds Of Notes Upi:- Accept Amount From All Types Of Upi Applications 4 Mounting Method : Wall Mounting / Stand 5 No. Of Product Columns : Four Vertical Spiral 6 Product Storage Capacity Total : 100 Cloth Bags 7 Display : Front Panel Lcd Display Shows The Product Price And The Quantity Availability. Lcd Display With Back Light And Dark Characters Will Indicate Transactions Details. 8 Advertisement Display (Optional) :Graphic Blue Color Backlight Lcd Display In Front Of The Machine With Advertisement Of Nagar Palika / Nagar Parishad / Nigam Or Other Government Entity 9 Dimensions (Wxdxh) Mm : 812 X 185 X 788 Mm 10 Weight : 27-30 Kgs 11 Electrical : 230V/50Hz/5 Amp, All Motors And Boards Operate On Dc 12 Vending Mechanism : Vends One Products, Upon Selecting A Product And Inserting The Required Coins 13 Coin Acceptance : Fully Electronic Coin Acceptor, Accept Six Different Variants Of Coins, Accept Multiple Coins To Reach The Desired Value, Easily Programmable For Any New Coins In Field 14 Programming Feature : Pricing - Programmable In Field 15 Time & Date : On Display - Programmable 16 Customizable : Mechanically Customizable For Any Product Dimension - Easily In Field 17 Operation Mechanism : Fully Electronic And Automatically Operated

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

20.

Defence #11198549 AOC

Contract Date: May 30, 2026 Contract Value : ₹ 3.02 Crore

Statutory Bodies & Commissions/Committees No of Bidders 11

Delhi View Result →

21.

Educational and Research Institute #11191898 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

22.

Defence #11191788 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Uttarakhand View Result →

23.

Housing Urban and Rular Development #11162283 AOC

Providing the manpower for electrical preventive and breakdown maintenance Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033for the period of 12 months.- 1 Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033 2 Skill Electrician: 03 Nos per day 3 Semi-Skill Electrician: 03 Nos per day 4 Un-Skill Electrician: 02 Nos. per day 5 Semi-Skill (Lift Operatror cum Attendent): 02 Nos. per day 6 SCOPE OF WORK:-1. The Scope of maintenance of electrical installation includes Routine, Preventive and Corrective Maintenance of L.T. Distribution lines to each floor of all the buildings/ blocks, entire wirings, BDB, PDB, VTPN, LT panels, Feeder Pillar Box, power & distribution cables, fittings & fixtures, Switch Boards, Power and Computer Points, Power outlet of all sorts of Air-conditioning Systems,resetting/ Switching off of Fire detection system during normal operation/ malfunctioning etc., Operation, configuration & repair / replacement of Timers for AC / Compound light, Compound Lighting including high mast, all glow sign and metal sign boards in the campus, Electrical Installations/ distribution up to Switch Board/ Panel of Lift Machine Room & Pump Room and / or Kiosk of Pump for Water Supply system, in the premises of above mentioned site. 7 2. Cleaning & checking of all the fittings & fixtures, Panels, TPN & SPN DBs, SFUs & other Electrical Installations, as well as the Compound Light installations in a regular interval to keep them in a tip-top condition at the cost of the agency and the same must be recorded in log book.3. The checking & repairing of the different types of light fittings, ceiling fans, exhaust fans etc. has to be done by the agency at his own cost (except rewinding of ceiling fans and exhaust fans) including dismantling and re-fixing of the same. (Major materials to be supplied by department). Especially, all the ceiling fans of entire worksite are to be inspected, at least once in 3(three) Months, in respect of Split Pin, Jam nut etc. to prevent unwanted falling of Ceiling Fans, failing which responsibility will be fixed up upon the agency. Split Pin, once taken out from the installation should not be re-used under any circumstances. Required number of Split Pin and Jam nut should be provided by the agency at their own cost. Building wise Fan register should be maintained as per Performa provided by the department, wherein each and every details of checking, replacement of spares, repairing etc. should be recorded against individual fan and every record should be signed by the attending Electrician / responsible person of the agency, duly countersigned by the concerned J.E. and A.E. 8 4. Measuring of various electrical parameters e.g. Current, Voltage, Temperature of different L.T. panel board, BDBs, Main switches etc., test of Insulation Resistance, Earth Resistance etc. are to be carried out every month and test results are to be recorded in Log book (preventive maintenance). Thermal Imaging Scanner should be used for measuring temperature of electrical equipment regularly to find out any abnormalities and printout of thermal image with date and time stamp should be provided to the concerned J.E. and A.E. In case, any abnormal reading is noticed, the same should be rectified/set right immediately by taking prompt, appropriate & effective measures/actions in consultation with concerned AE&JE. Thermal image should also be taken after rectification. The engaged agency will supervision overall maintenance works and examine Logbooks for any abnormality and sign the Logbook accordingly5. Switching On/Off of the common service lighting e.g. compound, corridors, staircases etc. and AC machines, Light, Fan etc in closed room like Library, Store, OPD, OT or these are not run beyond Office hours or off day will be the responsibility of the agency. 6.Cleaning of Sub-station rooms,LT Panel rooms,operation of HT switch gear & resetting the protective rekeys in case of any fault occurred will be the responsoibilty by the agency . 9 7. Operation of DG sets & checking and maintenance of AMF panel, Checking of Battery, checking of fuel level of DG Set, Lubricating oil etc, carrying & pouring of Fuel if necessary and maintaining separate log book for DG Set as per given Proforma. For Operation of DG Sets, experienced and skilled operator should be provided8.Llift operation cum attendent including regular cleaning of lifts etc as per direction of EIC.9. Regular dusting and cleaning of fire detection sensors and others parts including reset of fire alarms. 10 TERMS & CONDITIONS:-1. The agency has to depute manpower as directed by the EIC carrying out the maintenance work smoothly with due regard to the safety.Category of Staff:- i) Skilled Electrician --03 (Three) Nos per day ii) Semi-Skill Electrician--03(Three) Nos. per day iii) Un-Skill Electrician: 02 Nos. per dayiv) Semi-Skill (Lift Operatror cum Attendent): 02 Nos per day 11 2. The Maintenance Personnel, deputed by the agency havingvalid Voter Identity/ Adhaar Card and should possess valid Workman Permit/ License, as mentioned below, issued by Directorate of Electricity, Govt. of West Bengal.Category of Maintenance Personnel Mandatory Requirementa. Skilled Electrician Having Electrical/ Workman Permit i(b), ii & iv issued by Directorate of Electricity, West Bengal.b. Semi-Skilled Electrician Workman Permit i(b) and (ii) issued by Directorate of Electricity, West Bengal.c. Un-skilled Personnel/ Helper Basic knowledge of Electrical works.Also the Superviser of the company should have valid SCC Parts 1,2,3,4,5,6A,7A,7B ,9,11,12. 12 3. Agency must have to submit mandatorily the list of staff mentioning their Name, contact Mobile No., category, along with photo copy Valid Workman Permit, proper identity and address proof etc, in writing to the concerned JE & AE before commencing the work. All the photocopy should be attested and authenticated by the Agency.4) The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the Maintenance Staffs deployed including substitutes.They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE.5) The agency will maintain shift wise attendance register at call center to record the attendance of the staffs on duty which will be authenticated/ verified by the concerned Junior Engineer/ Officer- in-charge. 13 6) The agency shall have to prepare a Duty Roster of the Maintenance Staffs at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE and one copy should be available at the call centre.7)The agency will have to provide proper uniform for his maintenance staff at his own cost and clour of the dress will be decided by the EIC. No staff will be allowed for performing duty without proper uniform. 8) The agency, and all the electricians deputed at worksite must have Mobile Nos. and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay. 14 9) The agency has to provide one GPS activated smart phone dedicated for call center. The cost of the handset and running cost i.e. phone bills have to be borne by the agency. No claim of payment against any telephone bill will be entertained by this department.10) The agency should have a close watch on the attendance of the Maintenance Staffs. In case of absence of any Maintenance Staffs, the agency shall have to arrange for suitable alternative within an Hour, failing which, the charges for that day will be deducted from the bill of the agency on pro-rata basis.The Executive Engineer,Electrical Constrution Division ,P.W.D. reserves the right to terminate the contract in case of absence of Maintenance Staffs for more than three consecutive days, without showing further reason. 15 11) In case of any Accident and or physical illness of the staffs of the agency, while on duty, no claim will be entertained by this department and all responsibilities thereof should be shouldered by the agency only. Minimum wages as per existing Labor Act should be paid to the Electrician(s) and Helper(s)12) The agency shall have to provide 500V Megger, Digital Multi meter, Earth tester and all other requisite tools and tackles sufficient for checking, testing and recording of health of all electrical installations. Other tools & tackles e.g. Crimping Machine, Line Tester, Screw Driver, Pliers, Stripper, Sockets of some common sizes etc. should also be available at site, in sufficient quantities, free of cost, under disposal of their maintenance staff.Deployed employee by the agency should have sufficient knowledge to operate The Thermal imaging Scanner or to be used by the direction of Assistant Engineer/ Junior Engineer.13) The space for sitting accommodation for the staffs of the agency inside worksite premises will be provided by the competent authority. 16 14) All the maintenance staff of the contractor should have proper & constant vigilance and check that, there is no sign of heating-up, burning smell, discoloration or sparking at any of BDBs, panel boards, rising main etc. due to overloading or loose termination. Care should be taken to check any highly unbalance in loading at any point.15) In case of power failure or development of any unfavorable situation the agency will have to communicate with the concerned Power Supply Company authority and extend help or cooperation to said authority in restoration of power supply. Meanwhile the agency will have to operate the switching mechanisms of interconnections among available sources at suitable locations to maintain power supplies at important locations by monitoring and/ or restricting electrical loads in consultation with the concerned Junior Engineers & Assistant Engineer.16) Routine checking and preventive maintenance and breakdown maintenanceof the electrical installations has to be carried out by the agency maintaining a register under signature of respective Junior Engineer and Assistant Engineer with a view to ensure uninterrupted power supply within worksite campus. 17 17) Materials required as replacement during maintenance of electrical installations e.g. Lamps, SFUs, SPNDB, TPNDB, Cables etc. will be supplied by the Department for which requisition of Materials, signed by the authorized representative of the agency, should be submitted to the concerned JE (Electrical) well in advance. A separate material stock register should be maintained by the agency where entries related to Issue, Consumption & present stock position of Materials should be made. However auxiliary items like fuse wires, screws, nuts, bolts, washers, insulating tape, Split pins of Ceiling Fans, dusters etc. will have to be supplied by the agency at his/ their own expense.18) The agency shall have to deposit all dismantled unserviceable materials such as fused lamps, defective condensers, starters, and timers, MCBs etc. to the concerned Section Office or any other locations within worksite premises by the agency by its own laborers / arrangements / tools and tackles as per the direction of the Assistant Engineer/ JE concerned. Fresh materials will be issued against respective defective materials. No materials should be taken out of the maintenance site without the permission and necessary challan of the site-in-charge/JE 18 19) Any major shut down or fault should be brought to the notice of JE/AE immediately in writing and over telephone for further course of action. The agency will also have to attend emergency calls immediately at the site with staff, tools etc. on demand. 19 20) In case of any breakdown caused by cable fault etc., if situation demands the agency will have to restore the power supply temporarily either with the materials available with this department or arranging the same temporarily and safely at his own cost till completion of original restoration work.21) Building wise Log book is to be maintained for Preventive Maintenance & Cleaning and Corrective Maintenance of Electrical equipment except Fan as per direction of E.I.C. Separate Building wise Register is to be maintained for Ceiling Fans. The daily record of the Log book is to be signed by the responsible person and verified & signed by concerned JE & AE and photocopy of the same should be sent to the Executive Engineer concerned through proper channel at the time of submission of bills. The Logbooks should be available at Call center and should be produced on demand. 20 21) The agency should be responsible for any damage in the installation due to mishandling or mal- operation by its staff and shall be liable for rectification / replacement, as the case may be, of the damaged installation/ equipment within time frame to be fixed by concerned A.E., failing which the said rectification/ replacement of affected equipment/ installation would be executed by external agency and the cost thereof would be recovered from the bill and the accused staff should be replaced immediately.22) Bills should be submitted quarterly with the certification of satisfactory performance of the concerned JE and AE. Photocopy of Logbook and Attendance Register should also accompany the Bill. Payment should be made as per PWD norms. 21 23) Any fault of electrical installations starting from LT supply end (except the installations of Power Supply Company) to light, fan, call bell, plug points etc. i.e. LT cables and all sub-panels, distribution boards, main switches, earthing attachments, compound lights etc. has to be detected, attended and restored by the agency by its own man power with the help of the materials(cables, main switches, DBs, wires, HRC fuses etc.) available from this department or as per the terms & conditions of this contract. 24) If any kind of incapability & negligence are noticed in observing all the above-said terms & conditions causing inconveniences to public service, is subject to unilateral penalty, be it detected on the spot or thereafter (even after payment). This Department also reserves the right to deduct the cost from the bills of the contractor on pro-rate basis as determined by the Engineer –In-Charge for any shortfall in observing above T&C. In that case, the above- said contract may be terminated without issuing any notice and Stringent & punishable action may be taken against the contractor. 22 25) The technitian of the agency should capable of Casing -caping /rigid conduit wiring to overcome the emergent situation .25) The contract may be terminated with one months’ notice on either side (both agency and tender awarding authority) . 26) At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .27) Any upcoming / Ongoing project, which will be completed within stipulated period of Maintenance contract, automatically will come under maintenance contract .28) All the log-books should be available at the call center and to be produced to the Office of the AE/ JE on demand. 29) This Maintenance contract covers all the buildings, blocks, outdoor electrical gadgets within the premises ofTechnician Studio, Kolkata-700033 23 TERMS & CONDITIONS FOR OPERATION OF LIFTS:- 24 1. The agency has to depute manpower as directed by the EIC carrying out the lift operation smoothly with due regard to the safety.Category of Staff:- Semi-Skill (Lift Operatror cum Attendent): 02 Nos. 25 2. Day to day Attendent -cum -operation of passenger lift foras directed by the EIC.3. The lift operator/attendant should have a sound knowledge with valid lift operator license issued by the Licensing Board, Govt. of West Bengal.4. The operator/attendant should be obliging dutiful and polite to all while on duty. In case any irregularities of duty or complain against the operator/attendant if noticed, would be withdrawn forthwith and shall be replaced by new operator.5. The report is to be submitted periodically about the working of lift incl. all safety devices and Governor to the concerned JE/AE. 26 6. Agency must have to produce the list of the staff mentioning their Name, contact Mobile No.in writing with proper identity and address proof & their Valid lift operator license issued by the Licensing Board, Govt. of West Bengal along with photo copy to the concerned JE & AE before commencing the work. This should be treated as mandatory.7. The agency will have to provide proper dress for his staff and color of the dress will be decided by this department. No staff will be allowed for performing duty without proper dress.8. The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the operation Staffs deployed including substitutes. They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE 27 9. The agency shall have to prepare a Duty Roster of the operation Staff at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE.10. The agency must have separate contact telephone numbers with Mobile Nos. for his office and Supervisor deputed at worksite so that the agency may be communicated in case of any urgency and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay.11. The lift enclosure to be kept clean (not sweepers works) regularly by the operator 28 12. The operational work of the lift is to be supervised directly under the supervision of technical staff of the contractors under the direct control of JE/AE concerned. The contractor shall be responsible for any damage to the lift due to mishandling; loss will be recovered from the contractors bill as per direction of EIC.13. The Log Book recording regarding functioning and breakdown of the lift is to be maintained at site by the contractor under supervisions of JE concerned. If any kind of trouble arises, it should be brought to the notice of JE, AE concerned immediately. The JE/AE would put their signature on log book making note on performance. 29 14. In case of any absence of operator, the lift is to be made operative within 2 hours by placing the new operator. In case of absence prorate deduction will be made from the contractors bill and the contract may be terminated if it exceeds 3 (three) days. In this respect Executive Engineer’s decision will be final.15. This department would not be held responsibility for any accident of the liftman on duty for any reasons. The contractor or their lift operators on duty would not claim any compensation in any shape from this department for such accident. 30 16. The Executive Engineer,Electrical ConstructionDivision, P.W.Dte. would have sole authority to cancel the contract without assigning any reason with a notice of one month only.17. Any conditional quotation offered would not be accepted.18. Any quotation offered with price variation clause would not be accepted.19. The payment will be made monthly/quarterly on submission of bill in triplicate by the agency with satisfactory report regarding performance by the concerned JE/AE. Copy of log book has to be enclosed with the bill. 31 20. Persons entrusted by the agency for operation of lift should wear photo Identity Card during duty hours.21. Documentary evidence in support of payment of minimum wages as per Labour Act to be produced to the Principal Employer i.e. Executive Engineer, Electrical Construction Division, P.W.Dte. in-charge of works.22. Rescue operation is in the scope of agency in case of exigency arises out of lifts getting stopped in between landing floors with passengers inside cage.23. No claim towards cost of uniform, PPE e.g. Hand Gloves, Mask, Goggles, protective body- ware etc. for the maintenance staffs should be entertained by this department. However, if any such equipment/ dress is available from the Hospital Authority for their statutory requirement, the same would be provided. BUT IN NO CASE IT SHOULD BE ENTERTAINED AS MANDATORY CLAIM.24.At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .

Contract Date: Mar 09, 2026 Contract Value : ₹ 14.46 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

24.

Housing Urban and Rular Development #11147206 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Himachal Pradesh View Result →

25.

Educational and Research Institute #11134188 Technical Bid

structure waterproof and fire retardant international made hangar with aluminum structure having a span of 25 metres (as per onsite requirement) in width with waterproof and fire-retardant sheet (copy of certificate to be attached) should be strong enough to sustain high speed wind/rain pressure. wooden platform of 4”-9” height made with 19mm thick hard board and bed supported with providing 2”x2” wooden batons in properly leveled having no undulation, create no sound on using and covered with brand (*) new laminated carpet on complete area and 20 ceiling/pedestal fans covering the entire hangar structure. (entire ceiling and both walls from inside of both hangars should be covered with multi-colour cloth/fabric). 10 led metal lights & 50 mojo iron barricades (height 4 ft. x length 6ft.) with wheels should be provided one day before start of the book festival. auditorium (image at annexure-vi) fire retardant (certificate to be attached with tender document with validity) the flex/branding of the book festival may be affixed/provided on the hangar structures (image of hangar structure at page no. 44) as per the details given below: 1. branding on both sides of the hood (triangular shapes) of the hangar structures. 2. branding on the roof in hangar structures. 3. decoration of entry point of the structures with flowers/artificial flowers in consultation with festival/officer in-charge. the designs of the gates should be provided by the vendors for finalizing by the festival/officer in-charge. note: designs of all branding will be provided by nbt. *providing & laying on hire basis a brand new laminated carpet, non-woven needle punch carpet of genuine fiber minimum overall weight 1000 gm/ sgm (+ 5%) having minimum 3.90 mm thickness preferable containing 375 gm polyester fiber or equivalent fiber (+ 5%) and the carpet should not loss the thickness more than 25% after 1000 impact and of required shades & laying with approved adhesive or double side tape wherever required etc. as per the direction of officer-in-charge, i/c covering with polythene sheet till the inauguration of a festival. in case of dew factor, contractor should cover the entire structure of the hangars with waterproof tripal/polythene to avoid damaging of books. , stall: size 3m x 3m construction of stalls each of size 3x3mtr. with three side paneling of octonorm structure with computerized fascia of uniform colour (maximum 8 colour) with nbt logo in each and every stall on vinyl pasting in hindi/english (with flag numbering as per the image shown at annexure-v), consisting of 9 ms shelves of size 96”x8.5” with 2” depth duly powder coated in white colour, 9 led light (each of 9 watt), one octonorm table for counter of the same colour, two black cushioned chair with arms, a plug point for computer, two drinking water bottles (each of 1 ltr.) on daily basis, one small dustbin (10 ltr.) and one kanat of good quality of size 3mx3m size with provision of proper hanging system for covering/closing the stall after the book fair timings. the kanat should be made available to the participants a day before start of the book fair. laying & fixing of new brand laminated carpet(*) in the entire passage of indoor hall including the stall area, in case where structure is not required, should be provided by the contractor) , pagoda (3mtr.x3mtr.) construction of pagodas each of size 3x3mtr. on wooden platform, three side paneling of octonorm structure with computerized fascia of uniform colour (maximum 8 colour) with nbt logo in each and every pagodas on vinyl pasting in hindi/english with flag numbering as per the image shown at annexure-v in english/regional language of size 3m x3m, each with prefab octonorm system of the same colour in each stall, consisting of 9 ms shelves of size 96”x8.5” with 2” depth duly powder coated in white colour, 9 led light (each of 9 watt), one octonorm table for counter of the same colour, two black cushioned chair with arms, a plug point for computer, two drinking water bottles (each of 1 ltr.) on daily basis, one small dustbin (10 ltr.). 4mtr.x4mtr. polythene to cover the books is also required in each stall. , thematic customized gate: thematic/customized gate in line with the theme of the book fair with detailed specifications as shown and approved during digital presentation or as per designed provided by nbt. thematic gate comprises of backlit, wooden frame, mdf board. vinyl pasting and handmade painting (if required) with sufficient parco / led light. , stage: size 32’ x 20’ x 4’ in height made of wooden platform with new brand laminated synthetic carpet (*) with needle punch of blue/red color; • 1 table 20’ x 3’ with table cloth and frill in front or 10 center glass tables with side tables. • 1 lightening lamp • 15 executive wooden cushioned arm chairs with 10 side table of 3ft x 2ft size having vinyl pasting 4 side (design to be provided by nbt) • 10 standing ac tower (each of 5 ton) • 01 led screen wall (20’x8’) or as per stage requirement • 20 led parco light/ beam light (multi-colored on truss structure) for cultural events / programs & cultural • decoration of stage, entry gate & dais with fresh/artificial flowers should only be made after consulting the festival/officer in-charge • the arrangement of stairs with ramp with railings for support (both sides of stage) having vinyl pasting on 4 sides • 50 mineral water bottles (200 ml) for guests on stage, on per day basis • 10 name plates of the guests on stage as per the direction of the festival/officer in-charge. • 50 mojo barricades of 4ft. (height) x 6 ft. (width) with wheels • 2 podiums with nbt logo on sun board on three sides as per design provided by nbt 2 green room in the form of pagoda • size 6mtr.x6mtr. with three side covered with orange paneling, wooden platform with new brand laminated synthetic carpet. • 12 spot lights (9 watt each) • 4 led halogen lights (100 watt each) • 4 full length mirror with proper stand , complete pa system and stage set-up for organizing cultural / rock band programmes with operator for inaugural function and other programs along with provision of fusion and rock musical band playing for the 9 days during the book festival with two helper along with the provision of additional sound & lights as per tech rider of artists (as per the terms & conditions given at annexure-ix) a) box truss – aluminum box truss 60x40x25 with aviation grade material for safety and as per stage size (on all four sides) truss and scaffolding/speaker tower as required b). sharpy designing/pattern as per artist c) warm white led par d). blinder (4x4 motleys) e) colour led (54x3, 32x3) f). colour wash g) atomic strobe rgbw h) smoke machine high powered i) led percons j) avolite light controller/designing of lights patterns k) line array complete pa system venue suited dual, audio system (conical long throw system) – (lacoustic, jbl, dnb martin equivalent) l) bass audio subwoofer (lacoustic, jbl, dnb equivalent) m) side fill jbl, 835p n) foot monitors jbl 915 for stage angled curvature type for musicians o) 1x32 channel soundcraft mixer digital with presets and files (allen heath) p) amplifier audio digital with audio files for pa venue (crown, labgruppen, equivalent) q) amplifier crowns xti-6002 for stage r) di boxes bss/radial s) cordless mic sennheiser 945 for emeee t) shure mx series podium u) cordless shure for singer v) shure qlxd laple headset w) wired mirophones sm58 & sm57 for stage (shure/sennheiser) x) mic stand box big & small y) xlr snack long patch cord networking cabling console software laptop/playable engineer z) walkie talkie with talk back feature , announcement general pa system (digital) with 12 loudspeakers with 25–30-watt lmp and 1 standing mike (jbl/sony/phillips) for announcement purpose. , executive sofa sets (3 seater) with white covers along with 6 central tables , chairs with white cover for seat and back , wheel chair with attendant with proper uniform , queue manager , iron-ms steel barricades (size 4.5 ft. x 3 ft.) , brand new laminated carpet (*) for floor area (same specification as given for carpet in structure at s.no. 1) , tin wall covering with white color cloth with maximum height of 10 ft. , wooden platform with new laminated carpet , ground net (green) , fire fighting equipment (co2 water and powder mix with refilling dates) with one trained personnel with proper uniform for operating fire fighting equipment. , brand new dustbins (big size) plastic with cover , sweepers in proper uniform of the company for cleaning of ground are required one day before start of the book fair and till the end of the book fair (10:00 a.m. to 8:00 p.m.) , security personnel in proper security uniform and necessary equipments are required to be deployed at venue one day before start of the book fair and their after round clock till the end of the book fair: (*) rates may be given on per day basis only: a) supervisor b) guards , fresh painted steel almirah with lock and key (full size) , printing of flex & hoarding with mounting on iron frame in different locations (onsite/offsite), including gates, participants lists, backdrops, signages, etc. , vinyl digital print (3.3 ft. x 8 ft.) , pedestal / ceiling fans , wooden/steel tables 2’x5’ , selfie point on sunboard (5mm with digital vinyl print and mounting/framing) having heavy base (picture enclosed) – size: 4’x6’ and as per requirement , octonorm table for display of books , led wall screen of size 8’x12’ with masking & ramp (with operator) p5 – back support connectivity with multi cam setup, usb connectivity and laptop for insertion for av’s and tv’s, sound system and stage fold back speakers of 600 watts(2), sound mixing console and cables with wires and two power points (at the location decided by the officer-in-charge) for relay of live programme. , led screen (52 inch) — (the bazel 10m with stand and back support connectivity with multicam setup, usb connectivity and laptop for insertion for av’s & tv’s, sound system & stage fold back speakers, sound mixing console, cables with wires and 5 power points , providing of labours for routine miscellaneous work from 10:00 a.m. to 9:00 p.m. (rate may be given on per day basis) , halogen led lights of 150 watt with adjustable beam and angle complete with sufficient lighting and necessary wiring , 5 watt led coloured / decorative bulbs , silent generator set: the generator should be in operational condition one day before start of the book fair and till the conclusion of the fair. a) one 125 kva generator set (with fuel and operator) for full duration b) one 62 kva generator set (with fuel and operator) for full duration , main line connection for total job from electric and generator set sources and providing a line for connection inside the stalls of participants, illumination of main gate and toilet, area of the exhibition ground and any other area of the ground, if required with proper and sufficient supply. it shall be the duty of the contractor to get the temporary electric connection for the fair at his own cost one day before start of the book fair. the contractor shall arrange installation of the connection, tendering of security deposit etc., to government authorities at his own cost. only actual consumption charges will be reimbursed –to contractor by nbt on production of original bill by the contractor. in case of any problem for getting electric connection, it shall be the sole responsibility of the contractor to provide adequate supply through hiring more generators at his own cost one day before start of the book fair and no extra payment shall be given to contractor for hiring and providing such extra generator, if any. note : 1. providing power connection of various connected rating from switch board in various stands and with suitable size of cooper/aluminum 3½ /4 core armoured cable and earth wire controlled with suitable capacity switchgear such as ictpn, icspn/mcb i/c end termination laying of cable in floor, trench, carpets and tapping with power supply from permanent db of the ground i/c connections interconnection and maintenance during the fair period. (the cables and other wiring needs to be put under the wooden ramps/rubber covering mat etc. under the carpet on ground floor. 2. only one time payment as quoted by the tenderer will be made in case of any increase or decrease in number of stalls. , street light iron poles (20’x2-½’’) with 4 led halogen light each of 100 watt on each pole , photography per day basis (for 6 days) (photographs should be provided in the hard disk and pen drive after the book fair). 200 photographs of inauguration and other important programs are required in high resolution in coffee table album form in consultation with officer in-charge. • rate for per unit cost for 6 days (press conference + book fair) may be quoted in the financial bid/boq. • specifications for 01 unit: dslr full frame hd 4k camera with 3 cameras with photographer with each camera for 6 days. • photography + cameras would be as per onsite requirement and as per the directions of the officer in-charge. , gimbal videography per day basis (for 6 days) (all programs should be provided in hd format and high resolution. the same should be provided in hard disk & pen drive after the book fair) along with 20 minute short documentary of the programs. • rate for per unit cost for 6 days (press conference + book fair) may be quoted in the financial bid/boq. • specifications for 01 unit: 3 full hd video cameras setup with sdi output with 3 videographers with each camera for 6 days. • videography + cameras would be as per onsite requirement and as per the directions of the officer in-charge. note: provision of a professional digital video multi-camera setup for domestic book fairs, featuring broadcast-quality 1080p full hd (sdi format) production. the system includes: • three (3) full hd professional cameras with sdi output • online digital editing and production table • digital video mixer/switcher for live production • audio talkback communication system • professional audio mixer and sound equipment • on-site editing facilities • skilled technical crew, including camera operators and production personnel. this setup ensures high-quality live recording, switching, and editing suitable for professional broadcasting and online streaming requirements. , one drone camera with operator for videography of the event on day-to-day basis with on-site permission and security clearance (all coverages should be provided in hd format and high resolution. the same should be provided in hard disk & pen drive after the book fair). • rate for per unit cost for 6 days (press conference + book fair) may be quoted in the financial bid/boq. • specifications: hd format and high resolution would be as per onsite requirement and as per the directions of the officer in-charge , live streaming on social media channels with social media team of 2 members (youtube & facebook) from two locations and on digital screens as per requirement , cctv cameras with live telecast on screen (led 52”) with complete installation with a control room access note: complete footage/recording for entire event must be provided after the event to nbt in hard drive & pen drive (rates may be given for full duration) , refreshment packets 250 each per day for children/students (each packet contains – one packet of good day biscuit, one packet of britannia fruit cake, one packet of lays chips & one packet of fruity/real juice/maaza/slice , hiring of taxi (swift dzire) minimum 80 km and 12 hours duty , hiring of taxi (innova) minimum 80 km and 12 hours duty , indian flag (khadi cloth) with mounting on pole (20 feet height) with 100 watt led (4 nos.) halogen light to be focused from bottom to top , acrylic words installation with wooden base covered with cloth , thematic installation / sculpture with complete set-up: each sculpture is to be made and placed on laminated printed carpeted platform (double plywood platform/wooden platform on iron frame with laminated carpet) at ideal height as per the size and design approved in the presentation and will consist the following items: i) 4-5 parco lights ii) cloth for masking the platform from all sides iii) 5-6 queue manager , lunch/dinner (veg. thaali) on per day basis during the book fair (rates may be quoted for one thali) , lunch/dinner (veg. thaali) on per day basis during the book fair (rates may be quoted for one thali)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Ladakh View Result →

26.

Housing Urban and Rular Development #11133385 Technical Bid

Tender for Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. Dsr 2023 Item 16.83 , Dismantling Bitumin Road Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge :Dsr 2023 Item 15.43.2 , Dismantling Cement Concrete Road Manually / By Mechanical Means Including Disposal Of Material Within 50 Mtr. Lead As Per Direction Of Engineer In Charge. Nominal Concrete 1:3:6 Or Richer (I.E. Equivalent Designs) Dsr 2023 Item 15.2.1 , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar For Brick Nalha Dsr 2023 Item 15.7.4 , Deduct Quantity Of Brick Bats Of O. B. B. From Dismentalled Bricks Dsr 2023 Item 3.0362 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. Dsr 2023 Item 2.8.1 , Extra For Excavating Trenches For Pipes, Cables Etc. In All Kinds Of Soil For Depth Exceeding 1.5 M, But Not Exceeding 3 M. (Rate Is Over Corresponding Basic Item For Depth Upto 1.5 Metre). Dsr 2023 Item 2.8.1 , Extra For Excavating Trenches For Pipes, Cables, Etc, In All Kinds Of Soil For Depth Exceeding 3 M In Depth, But Not Exceeding 4.5 M. (Rate Is Over Corresponding Basic Item For Depth Upto 1.5 Metre.) Dsr 2023 Item 2.8.1 , Open Timbering In Trenches Including Strutting And Shoring Complete (Measurements To Be Taken Of The Face Area Timbered): Depth Not Exceeding 1.5 M 2.20.1 , Depth Exceeding 1.5 M But Not Exceeding 3 M 2.20.2 , Depth Exceeding 3 M But Not Exceeding 4.5 M 2.20.3 , Provision For Silt Cleaning Of Existing Nala By Hydraulic Excavator Of 1 Cum Bucke, Complete In All Respects. Excavation Of Nala Diversion @ 1 Rm Per Hr Dsr 2023 Item 2.0020/8 , Exta Cartage For Disposal Of Earth For The Construction Of Drain Upto 5 Km Distance.Dsr 2023 Item 1.1.2 , Dewatering With Centrifugal Water Pump Of (Hire Charges Of Pump Set Of Capacity 4000 Litres/Hour) Pump Including Arrangement Of Pump Suction And Delivery Pipes And Other Accessries At Site Including Cost Fuel/Lubricants And Operators@ 1 Rm Per Hr Dsr 2023 Item 1.0011 , Making Temporary Bundha Across The Existing Nala By Sand Filled Bags And Pvc Sheet To Divert The Flow Of Nala Including Supply Of All Materials, Labour, T&P Etc. Complete Required For Proper Completion Of Work (In Every 200M Distance) Ar-2 , Providing And Erecting 2.00 Metre High Temporary Barricading At Site; Each Panel Of Size 2.50Mx2.00M Made Of 40X40x6mm Angle Iron Or 50X50x3mm Hollow Ms Tube Posts/Horizontal Members/Bracings Covered With 1.63Mm Thick Ms Sheet. The Sheet Shall Be Fixed With 30X5mm Ms Flat By Suitable Welding/Riveting. The Panels Shall Be Made So That Gap Of 50Cm Above The Ground Is Available Making Overall Height As 2.5M. Ms Channel Islc 75 @ 5.70 Kg/M, 50Cm Long Shall Be Provided At The Bottom Having Oval Shaped Holes Of Size 50X25mm At Both Ends With 50Cm Long Ms Angle 40X40x6mm Bracing. Suitable Arrangement Shall Be Made To Fix The Barricading To Avoid From Overturning By Providing 250Mm Long Expansion Fasteners At Both Ends. The Work Shall Be Executed As Per Drawing/Direction Of Engineer-In-Charge Which Includes Writing And Painting, Arrangement For Traffic Diversion Such As Traffic Signals During Construction At Site For Day And Night, Glow Lamps, Reflective Signs, Marking, Flags, Caution Tape As Directed By The Engineer-In-Charge. The Barricading Provided Shall Be Retained In Position At Site Continuously I/C Shifting Of Barricading From One Location To Another Location As Many Times As Required During The Execution Of The Entire Work Till Its Completion. Rate Include Its Maintenance For Damages, Painting, All Incidentals, Labour Materials, Equipments And Works Required To Execute The Job. The Barricading Shall Not Be Removed Without Prior Approval Of Engineerin-Charge. (Note :- One Time Payment Shall Be Made For Providing Barricading From Start Of Work Till Completion Of Work I/C Shifting. The Barricading Provided Shall Remain To Be The Property Of The Contractor On Completion Of The Work).(In Every 10M Distance) Dsr 2023 Item 16.81 , Construction Of Granular Sub-Base By Providing Close Graded Material Conforming To Specifications, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material By Tippers To Work Site, For All Leads & Lifts, Spreading In Uniform Layers Of Specified Thickness With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller To Achieve The Desired Density, Complete As Per Specifications And Directions Of Engineer-In-Charge.With Material Conforming To Grade-Ii (Size Range 53 Mm To 0.075 Mm ) Having Cbr Value-25 Dsr 2023 Item 16.78.2 , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr 2023 Item 4.1.8 , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland/Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete. Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum Dsr 2023 Item 5.33.1.1 , Providing, Hoisting And Fixing Above Plinth Level Up To Floor Five Level Precast Reinforced Cement Concrete In Shelves, Including Setting In Cement Mortar 1:3 (1Cement : 3 Coarse Sand), Cost Of Required Centering, Shuttering And Finishing With Neat Cement Punning On Exposed Surfaces But , Excluding The Cost Of Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources).Dsr 2023 Item 5.16 , Form Work Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete (In Base Slab) Dsr 2023 Item 5.9.1 , Form Work Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete (In Wall) Dsr 2023 Item 5.9.2 , Form Work Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete (In Cunette) Dsr 2023 Item 5.9.2 , Form Work Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Shelves (In Top Slab) Dsr 2023 Item 5.9.3 , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced, Brick Work ( When Not Included In Anover All Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Wastage Bend Hooks And Authorized Over Lapping Shall Be Measured Upto Floor Two Level. Dsr 2023 Item 5.22.6 , Laying Old Cement Cocrete Interlocking Paver Blocks Of Any Design/ Shape Laid In Required Line, Level, Curvature, Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineerin-Charge. (Old cement concrete Paver Blocks Shall Be Supplied By The Department Free Of Cost) . Dsr 2023 Item 16.84 , Construction Of 20 Mm Thick Bituminous Road Including Earth Work Sub Base, Base & Top Layer At ( Match Specification With Existing / Dismantling Bituminous Road) All Completed In All Aspect. A.R.8 , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Ag Dsr 2023 Item 4.1.8 , Providing And Laying Design Mix Cement Concrete Of M-30 Grade, In Roads/ Taxi Tracks/ Runways, Using Cement Content As Per Design Mix, Using Coarse Sand And Graded Stone Aggregate Of 40 Mm Nominal Size In Appropriate Proportions As Per Approved & Specified Design Criteria, Providing Dowel Bars With Sleeve/ Tie Bars Wherever Required, Laying At Site, Spreading And Compacting Mechanically By Using Needle And Surface Vibrators, Levelling To Required Slope/ Camber Finishing With Required Texture, Including Steel Form Work With Sturd M.S. Channel Sections, Curing, Making Provision For Contraction/Expansion, Construction & Longitudinal Joints (10 Mm Wide X 50 Mm Deep) By Groove Cutting Machine, Providing And Filling Joints With Approved Joint Filler And Sealants, Complete All As Per Direction Of Engineer-In-Charge (Item Of Joint Fillers, Sealants, Dowel Bars With Sleeve/ Tie Bars To Be Paid Separately). Note:- Cement Content Considered In M-30 Is @ 340 Kg/Cum. Excess/Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately. Cement Concrete Prepared With Batch Mixing Machine Dsr 2023 Item 16.43.1 , Providing Of Weep Hole Including Filter Media & Geonet Ar3 , Less 5% On Total Of All Above Items As Per Government Sanction Order (S.No. 1 To 30)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

Uttar Pradesh View Result →

27.

Tourism #11114098 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ 3.70 Crore

Government Departments No of Bidders 2

Goa View Result →

28.

Railways #11107644 AOC

Supply Of Fully Automatic Computer Controlled Latest Technology Universal Testing Machine 40Ton, Specification No.: Mod/72509Fully Automatic Computer Controlled Latest Technology Universal Testing Machine 40Ton, Specification No.: Mod/72509,Cost Of Concomitant Accessories As Per Technical Specification ] , Fully Automatic Computer Controlled Latest Technology Universal Testing Machine 40Ton, Sp Ecification No.: Mod/72509 ] , The Cost Of Any Other Accessory Which In The Opinion Of Tenderer Is Essentially Required For M Aking The Machine Fully Functional As Per Technical Specification ] , Cost Of Inspection Charges As Per Technical Specification ] At (Location) Dy.C.C.M.T., Blw Uttar Pradesh 1.00 Numbers 5 01600033 Essential Non Stock --- Yes Consignee Inr Services (Y) Cost Of The Turnkey Charges Viz Foundation, Installation, Commissioning & Prove Out & Trainin G Etc As Per Technical Specification ] Page 1 Of 8 Run Date/Time: 13/08/2025 13:18:29Blw Hq-Stores/Blw Tender Document Tender No 05255183 Closing Date/Time 12/09/2025 15:00 At (Location) Dy.C.C.M.T., Blw Uttar Pradesh 1.00 Numbers 6 01600034 Essential Non Stock --- Yes Consignee Inr Services (Y) Cost Of Preventive And Breakdown Maintenance During The Warranty Period As Per Technical Specification ] At (Location) Dy.C.C.M.T., Blw Uttar Pradesh 1.00 Numbers 7 01600035 Essential Non Stock --- Yes Consignee Inr Services (Y) The Applicable Duties & Taxes Along With Insurance, Freight, And Other Related Charges, As Per Tech Spec ] At (Location) Dy.C.C.M.T., Blw Uttar Pradesh 1.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 1 Days Of Issue Of Contract, Completion --- : Within 2 Months Thereafter Payment Terms S.No Description Payment Terms 1 80 Percent Of The Payment On Proof Of Inspection Certiï¬Cate, Joint Inspection (Ji) And Receipted Challan Regarding Correct Receipt Of Materials In Good Condition At Site. Bal

Contract Date: May 19, 2026 Contract Value : ₹ 8.79 Lakh

Government Departments No of Bidders 1

Uttar Pradesh View Result →

29.

Railways #11106018 AOC

Tender For Eot Crane Capacity 10 Ton.Eot Crane Capacity 10 Ton.,The Cost Of Basic Eot Crane. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Dsl (Type And Length Of Dsl As Specified In Schedule-I). [ Warranty Period: 24 Mo Nths After The Date Of Delivery ] ] , Cost Of Spares As Per Schedule-Iv And Additional Spares And Items Viz Slings/Lifting Tackles A S Specified In Schedule-I. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Maintenance Tools As Per Schedule-V [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Treated As Concomitant Accessory. [ Warranty Period: 24 Mo Nths After The Date Of Delivery ] ] , Cost Of Installation & Commissioning Of Crane And Dsl (Length Of Dsl As Specified In Schedu Le-I). ] , Cost Of Comprehensive Amc For Five Years After The Warranty As Per Clause 17 Of Section-V. ] At (Location) Sse(Rw-Stores)/Ctrc/Tata, Ser Jharkhand 1.00 Numbers 8 6525Ns08 Optional Non Stock --- No Consignee Inr Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period. ] At (Location) Sse(Rw-Stores)/Ctrc/Tata, Ser Jharkhand 1.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Completion : Within 328 Days Delivery Schedule As Per Sr No 7 Of Section Iv Of Annexure 1 Attached Payment Terms S.No Description Payment Terms 1 A) 80% Payment Will Be Made On Receipt Of The Material Duly Pre Inspected And Receipted At Site By The Consignee In Good Condition. B) Balance 20% Payment Will Be Made On Submission Of Proving Test Certiï¬Cate After Successful Completion Of Proving Test In Which The Machine Performance Would Have Been Demonstrated By The Supplier Or His Agent After Its Commissioning At The Consignees Premises Subject To Furnishing A Bank Guarantee For An Amount Equal To 10% Of The Contract Value, As Per Annexure-11 Fully Indemnifying The Purchaser Against All Losses Incurred By The Purchaser During The Warranty Period Stipulated In The Warranty Clause. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His Oï¬€Er The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. 4. Eligibility Conditions Page 2 Of 9 Run Date/Time: 28/08/2025 13:17:56Stores-Pcmm/South Eastern Rly , Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period. ] At (Location) Sse(Rw-Stores)/Ctrc/Tata, Ser Jharkhand 1.00 Numbers

Contract Date: May 18, 2026 Contract Value : ₹ 41.84 Lakh

Government Departments No of Bidders 1

Jharkhand View Result →

30.

Communications and Information Technology #11104473 AOC

Civil And Interior Works For Setting Up Of Igr Office At 6Th Floor Stp Ii Building- 1 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete, including primer & painting. 2 Lock & key for Drawers (Supplying, fitting and fixing Godrej Multi Lock or equivallent) . 3 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing film,Natural white . 4 For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M. 5 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. 6 Dismantling aluminium/ Gypsum partitions, doors, windows,taking out glass from fixed glazing/window and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. 7 Supplying and erecting half height or full height partition I.e. upto soffit of the ceiling, beam, false ceiling, bulk head etc made of aluminium hollow tube (50 x 50 x 2) mm frame work for both vertical and horizontal members @ 600mm bothways linked horizontally and vertically,top runners bottom skirting end trims, corner posts both horizontal as per drawing and direction with all labour and materials. Allow for cutting chase to wall, floors and mending good damages. Partition which are to be terminated at false ceiling level, the end & intermediate vertical members are to be extended upto ceiling/beam and frames are to be fitted properly by means of approved metal (Brass) expansion fastener. (measurement for ply fixing area will be cosnidered for payment) 8 Rate should include necessary hardware fittings and fixtures, adhesive, roof/height adjuster etc and arrangement shall be made to both vertical and horizontal members by cutting slots for drawing of raw power, UPS power, LAN connection, telephone etc and also making provisions for fixing of power outlets. Special cover plates, pierced for fittings of switch board should be fitted on the frame work as per drawing and direction. The rates should also include to cover the end trims by 75 mm x 25 mm (approx) Indian best quality moulded teak wood bead duly polished and malamine finish as per drawing / direction of EIC wherever applicable complete with all labour and materials. 9 to be provided glass wool of 50mm thick having density of 48 Kg per cum. to be inserted into the pre - fabricated slot covered the glass wool by marking cloths treated with Naptha @ 0.07 Ltr.per Sq.m. of cloths for acoustic purpose. complete as per directions of Engineer-in-Charge. 10 for Full height partition 11 for half height partition 12 Supplying and erecting wall panelling as per drawing and conforming to the following specification. Basic Framework:- Full height Solid partition with kapur wood frame of C.S size 2 x 2 at required spacing but not exceeding than 2-0 x 2-0. The framework shall be treated with two coats of wood preservative and fire retardant material Skin Membrane:- The skin shall comprise of a covering of 6mm thick Marine grade plywood Finishing:- 1mm thick decorative teak veneer of prescribed shade on open sides. The groove between two veneer joint shall not exceed 1.0 mm as or otherwise specified by the architect. Polish of teak veneer is included in the cost. The rate for wooden cladding will include for making out outlets of appropriate size for electrical, telephone and computer terminals wherever required 13 Providing, fitting and fixing in position frameless toughened 12 mm glazed wall fixed to the lintel/AL section/glass and floor fitted with necessary SS Patch fittings including all necessary fitting fixture. 14 Supplying and erecting wall panelling as per drawing and conforming to the following specification. Basic Framework:- Full height Solid partition with kapur wood frame of C.S size 2 x 2 at required spacing but not exceeding than 2-0 x 2-0. The framework shall be treated with two coats of wood preservative and fire retardant material Skin Membrane:- The skin shall comprise of a covering of 6mm thick Marine grade plywood Finishing:- 1mm thick decorative teak veneer of prescribed shade on open sides. The groove between two veneer joint shall not exceed 1.0 mm as or otherwise specified by the architect. Polish of teak veneer is included in the cost. The rate for wooden cladding will include for making out outlets of appropriate size for electrical, telephone and computer terminals wherever required 15 Providing and fixing Decorative frosted film (Like as: Matte, colour, texture, nature, pattern, gradient approved by the client) of approved make over glass surfaces. The film thickness is 0.1mm to 0.5mm. The film made of Polyester or Vinyl. These films have frosted and translucent finishes that ensure privacy without sacrificing natural light. They are ideal for commercial interior glazing applications such as office partitions or to meet interior design. Samples: For each type of decorative film specified, two (2) samples, 300mm square. The adhesive is activated by pressure and water. It is characterized by its permanently tacky nature and its installation ease. Film Install with no gaps or overlaps and remove air bubbles, blisters, and other defects. Be careful to remove “fingers” to eliminate any contamination or excess water pockets. It is crucial to remove as much water as possible during installation. The above modular partition should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary. services all fitting fixers complete in all respect 16 Manager/Officer/Conference chair--Supplying and installation of high back chair of dimensions approx 1200mm-1350mm (h) x 700mm-720mm (d) x 650mm-720mm (w), with nylon revolving base having heavy duty 5 nos castors, abs seat and back,height adjustable arm rest, pu molded seat and back uphoistered with leatherette, with push back locking and pneumatic gas lift mechanism, the handles will be soft pu moulded complete in all respect. 17 Work station & Visitor chair-Supplying and installation of medium back chair of dimensions approx 850mm-1000mm (h) x 630mm-720mm (d) x 650mm-720mm (w), with nylon revolving base having heavy duty 5 nos castors, abs seat and back,height adjustable arm rest, pu molded seat and back uphoistered with leatherette, with push back locking and pneumatic gas lift mechanism, the handles will be soft pu moulded complete in all respect 18 Supplying & installation of Center & Tea table of high polished SS section of AISI 304-8 grade frame work with 12mm thick tinted glass top with bevelled edge of approved quality all complete as per drawing and direction with all labour and materials including nylon sides & vacum pads 19 Supply & installation high back chair with head rest for IGR chamber --- having Leather upho;strey,pneumatic seat height adjustment , adjustable arm rest , back height adjustment , synconous tilt mechanism, multi position locking , 5 nos heavy duty castor. chair dimensions approx 1200mm-1350mm (h) x 750mm-720mm (d) x 650mm-720mm (w) . 20 Supply & Installation sofa sette 400mm seat height from floor, made of 25mm dia 1.5mm thick SS pipe legs, 3nos horizontal member of 25mm dia 1.5mm thick SS pipe (all SS are 304 grade) with internal frame made of capoor wood finished with 75mm wide elastic belt, and 100mm seat and 75mm to back high density 50 grade foam respectively 21 cladded with approved quality markin and upholstery of leather foam of approved shade & quality ( Skipper/Steller/Times etc) complete as per design and drawing with all labour and materials 22 i) 2 seater (Size: 1350mm length, 760mm width,760mm back height ) 23 Supplying & installation of Center & Tea table of high polished SS section of AISI 304-8 grade frame work with 12mm thick tinted glass top with bevelled edge of approved quality all complete as per drawing and direction with all labour and materials including nylon sides & vacum pads 24 Supply fitting fixing rollar blinds as per deirection of E-I-C. 25 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in Charge.This item is considered for making of officer/manager/PA/reception table/storage unit etc. 26 19mm 27 12mm 28 9mm 29 Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. This item is considered for making furniture items like storage unit etc. 30 19mm 31 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. This item is considered only for furniture item like table, storage unit etc. 32 1mm thk 33 French polishing to wood work including preparing surface (ordinarygloss) 34 Supply fitting fixing SS Handle 35 Supply fitting fixingAuto Hinge 36 Supply fitting fixingTelescopic Channel 37 Supply fitting fixingkey board tray 38 Supply fitting fixingWire Manager 39 Supply fitting fixing Lock 40 Supply fitting fixingMagnatic Door Lock 41 Supply & fitting fixing Black & Gold 2 colour acrlic sheet laser cutting ,Size: 9 inch x 5inch 42 Supply & fabrication 8 mm Black acrylic lazer cutting board pasting on individual 3D letter make ( Tanishq Gold palted) with govt. logo. as per your requement . size : 3ft x5 ft. 43 Supply & fitting fixing clear acrlic sheet laser cutting pasting on 2 clour plotter vinyl other plate .15”x4” 44 Supply & fitting fixing clear & Black acrlic sheet laser cutting pasting on 2 clour plotter vinyl name plate .Size: 15 inch x8 inch =120 sq.inch 45 Supply & for 8 mm clear acrylic sheet pasting on Translite film with S.S star nut. Size: 4 ft x2 ft. 46 M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) 47 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & floor spring type fixing arrangement,lock and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge 48 Supplying, fitting & fixing Stainless Steel D or H type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in Charge fitted and fixed complete including all incidental charges. 49 Supplying Godrej mortice lock chromium plated with keys 6 levers including fitting & fixing complete 50 Supply fitting & fixing Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixedcomplete 51 Supplying and laying true to line and level vitrified tiles (size Iess than 600mmX 600 mm X 9.5 mm thick)of approved brand. Including cost of taking out /dismantling existing floor finish. 52 Applying Interior grade Acrylic Primer of approved quality and brand… 53 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) 54 Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Contract Date: May 17, 2026 Contract Value : ₹ 18.12 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

31.

Defence #11097521 AOC

Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore

Statutory Bodies & Commissions/Committees No of Bidders 9

Ladakh View Result →

32.

Water Resources and Irrigation #11087445 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Himachal Pradesh View Result →

33.

Tourism #11085444 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Goa View Result →

34.

Railways #11061337 AOC

Bids Are Invited For Custom Bid For Services - Supplying Of Man Power For Housekeeping Of Engineering Orh At Ujjain Having 5 Suits At Ujjain Of Maximum Capacity 15 Occupants At A Time All Suits Have Front And Back Verandah Two Kitchen Toilet Work Includes Brooming Floor .. , Custom Bid For Services - Washing And Ironing Double Bed -Bed Sheet With Pillow Cover One Double Bed Sheet Of Standard Size And 2 No Pillow Cover Count As One Unit For Payment Work Is To Be Carried Out To The Satisfaction Of Sse Works Ujn Rate Includ.. , Custom Bid For Services - Washing And Ironing Single Bed Bed Sheet For Cover Fly Work Is To Be Carried Out To The Satisfaction Of Sse Works Ujn Rate Includes All Consumables Carries Charges T And P Man Power Taxes Etc Complete Record Will Be Maintain.. , Custom Bid For Services - Dry Cleaning And Ironing Blanket Double Bed Of Standard Size Work Is To Be Carried Out To The Satisfaction Of Sse Works Ujn And Special Condition Attached Rate Includes All Consumables Carries Charges T And P Man Power Taxes.. , Custom Bid For Services - Washing And Ironing Curtain Of Door And Window Of Any Size Hanging In Engineering Orh At Ujjain Having 5 Suits Work Is To Be Carried Out To The Satisfaction Of Sse Works Ujn And Special Condition Attached Rate Includes All C.. , Custom Bid For Services - Annual Maintenance Of Ro Machine Situated In Engineering Orh At Ujn Having 5 Suits Including Replacement Of Membrane And Filter At Every Normal Schedule Six Months Rate Includes All Consumables T And P Man Power Taxes Etc Co.. , Custom Bid For Services - Supplying Of Material Of Daily Use Consumables As Per Attached List

Contract Date: Ref. Documents Contract Value : ₹ 15.89 Lakh

Government Departments No of Bidders 15

Madhya Pradesh View Result →

35.

Power #11055259 AOC

Contract Date: May 11, 2026 Contract Value : ₹ 242.30 Crore

Government Departments No of Bidders 3

West Bengal View Result →

36.

Educational and Research Institute #11054746 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Jammu And Kashmir View Result →

37.

Railways #11019170 AOC

Contract Date: May 07, 2026 Contract Value : ₹ 35.16 Lakh

Government Departments No of Bidders 1

Tamil Nadu View Result →

38.

Agriculture #10988522 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Rajasthan View Result →

39.

Railways #10882300 AOC

Supply Of Dynamic Wheel Balancing Machine (On Turnkey Basis) As Per Bid Document Part Ii Attached Below. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Comprehensive Annual Maintenance Contract For Dynamic Wheel Balancing Mac Hine [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 8 % ] ] At (Location) Sse/Wheel/Pl, Wr Maharashtra 1.00 Numbers 3 657933430011 Essential Non Stock --- Yes Tpi Agency Inr Spares (Y) Concomitant Accessories For Dynamic Wheel Balancing Machine As Per Bid Docum Ent Part Ii Attached Below [ Warranty Period: 30 Months After The Date Of Delivery ] ] Consignee Sse/Wheel/Pl, Wr Maharashtra 1.00 Set Inspection Details Stage Inspection Not Required 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 1 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 For All Items Completion : Within 330 Days Firm Shall Complete The Supply, Installation & Commissioning And Know - How Training To Concern Staff Of Consignee At Consignee Premises Within Stipulated Time Prescribed In Delivery Period. Payment Terms S.No Description Payment Terms 1 80% Payment Shall Be Made On Receipt Of The Items In Satisfactory Condition, Against Suppliers Challan Certiï¬Ed By Consignee Gazetted Oï¬Ƒcer, And Inspection Certiï¬Cate Issued By The Nominated Inspection Agency And After Successful Installation, Commissioning. Balance 20% Payment Shall Be Made After Issue Of Ptc(Proving Test Certiï¬Cate) (To Be Issued After One Month Performance Observation) By Consignee Subject To Submission Of Bank Guarantee For 10% Of The Contract Value For Warranty Obligations, Valid Beyond 6 Months Period Of Warranty. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His Oï¬€Er The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 1) The Contract Shall Be Governed By Latest Version (Along With All Correction Slip) Of Irs Conditions Of Contract And All Other Terms And Conditions Incorporated In The Tender Documents. (2) The Contract Shall Also Be Governed By Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before Tender Closing, Available As Public Documents Of Western Railway On Ireps Website (3)(A) It May Be Noted That Conditions Mentioned In Tender Schedule On Ireps Shall Prevail Over General Conditions Of Contract, Which In Turn Shall Prevail Over Irs Condition Of Contract. (B) Terms & Conditions/Speciï¬Cations Mentioned In Nit Shall Prevail Over Conditions Mentioned In Documents Attached With Nit. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 The Manufacturer Shall Have Valid Iso-9001 Certiï¬Cate On The No No Allowed Original Date Ofclosing Of Tender And A Copy Of Same Should Be (Mandatory) Submitted Along With The Bid (Dynamic Wheelbalancing Machine Shall Be In The Scope Of Iso Certificate). 2 1) The Bidder/ Manufacturer Must Have Supplied At Least 01 No No Allowed Numbers Of The Similar Or Higher Capacity Of Dwbm To Any Of Indian (Mandatory) Railway Production Unit Or Zonal Railways Or Other Government Organizations In Last 05 Years From The Date Of Closing Of Tender. Firm Must Upload Documentary Evidence Regarding The Past Successful Supplies Like Copies Of Receipt Note/Inspection Certiï¬Cate/Installation And Commissioning Report Etc. Along With The Oï¬€Er. (2) Performance Certiï¬Cate:Out Of The Item Supplied As Per Clause Above, The Bidder Shall, In Their Oï¬€Er, Submit Performance Certiï¬Cate Of At Least 01 Number Of Machine That Must Have Worked Satisfactorily For At Least One Year From The Date Of Commissioning.The Performance Certiï¬Cate Submitted By The Bidder Should Not Be More Than One Year Old I.E. It Should Have Been Issued Within One 01 Year From The Tender Closing Date Issued By The Actual End User Of The Machine. Page 2 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 3 Firm Shall Submit The Para-Wise/Item-Wise Compliance Of All The No No Allowed Parameters Mentioned In The Technical Speciï¬Cations Mentioned In (Mandatory) The Document Below. If There Is Any Deviation, The Same Shall Be Clearly Indicated In The Deviation Statement. A.Bid Document Part Ii 4 Firm Must Upload Documentary Evidence Regarding The Past No No Not Allowed Successful Supply Performance Like Copies Of Contract Order/Receipt Note/Inspection Certiï¬Cate, Installation And Commissioning Report Jointly Signed With The Actual User/Consignee, Ptc Etc. Along With The Offer, Failing Which The Offer Shall Be Liable To Be Rejected. 5 (1) Procurement Shall Be Done From Manufacturers (Oems) Or No No Allowed Authorized Agent / Dealer Of Oem. (2) Either Oem Should Quote (Optional) Directly Or Oem Can Give Tender Speciï¬C Authorization To Its Agent / Dealer To Quote On Their Behalf. (3) The Authorized Dealer Should Submit Valid Tender Speciï¬C Authorization, Along With The Oï¬€Er, Failing Which Their Offer Will Be Summarily Rejected. 6 Earnest Money Deposit (Emd): (1) Emd Shall Be Submitted By No No Allowed Tenderer As Speciï¬Ed In Tender Schedule, Along With Their Online (Optional) Oï¬€Er. There Shall Be No Exemption From Submission Of Emd For Any Tender Or By Any Tenderer Except Those Exempted. (2)Exemption To Submit Emd Will Be Given In The Following Cases : (A) Only Manufacturers Having Valid Udyam Certiï¬Cate Under Micro And Small Category Are Eligible For Exemption From Emd. (B) Other Railways And Government Departments. (C) Indian Ordnance Factories. (D) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them. (E) Vendors Registered With Railways For The Trade Group Of The Item Tendered. (F) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core, Subject To Approval Status Being Valid On The Date Of Tender Closing. (G) Vendors Registered With Railways For Supply Of Medicine, Medical Equipments And Consumables For These Items. (H) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued (I)Kvic And Acash For Items Supplied By Them. 5. Compliance Conditions Commercial-Compliance S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 The Bidder Conï¬Rms That Rates And Other Ï¬Nancial Terms Quoted In No No Not Allowed Relevant Columns Of Ï¬Nancial Bid Will Only Be Ruling Terms For Acceptance, And Such Terms Quoted Anywhere Else Should Be Ignored. (Denial Of This Condition Not Recommended) 2 Make In India Policy :- 1) As Per Clause 1800 Of Instructions To No No Allowed Tenderers And General Conditions Of Tender Indigenous Version 14 (Optional) Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 2) The Tender Will Be Governed By Railway Board Letter No.2020/Rs(G)/779/ 2 Dtd. 12/06/20 And 2015/Rs(G}/779/5(Vol.L) Dated 24/09/2020 & 2024/Rs(G)/779/3(E 3464799) Dt.25.06.2024 For Public Procurement (Preference To Make In India) 3 Please Enter The Percentage Of Local Content In The Material Being No Yes Allowed Oï¬€Ered. Please Enter 0 For Fully Imported Items, And 100 For Fully (Optional) Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Inspection By Tpi Agency At Oems Premises . Firm To Quote Place Of No No Not Allowed Inspection Clearly In Their Oï¬€Er So As To Enable This Oï¬Ƒce To Incorporate Place Of Inspection In Po.The Machine Shall Be Inspected And Tested During Diï¬€Erent Stages Of Its Manufacture Starting From Raw Material Till The Completion Of Machine As Per Annexure-I (Qap) Attached For Reference. Page 3 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 2 The Machine Shall Be Inspected And Tested During Diï¬€Erent Stages No No Allowed Of Its Manufacturing Starting From Raw Material , By The Purchaser (Mandatory) Or His Authorized Representative (Tpi) At The Suppliers Or His Sub- Suppliers Works For Which Bidder Has To Submit Qap Incorporating The Tests Along With Stage Inspections For The Tender Items And Tpi Will Carried Out Inspection At Manufactures Works As Per The Qap (Quality Assurance Plan) 3 Evaluation Criteria: 1) The Inter-Se-Position Of All Oï¬€Ers Received No No Not Allowed Will Be Decided On Total Value Of Tender Quoted By The Firm. 4 Road Delivery : In Case Of Road Delivery, The Date Of Delivery At No No Not Allowed Destination (Consignees End) Shall Only Be Treated As Delivery Date Irrespective Of F.O.R./F.O.T. Condition Mentioned Elsewhere In The Contract/ Tender. 5 Performance/Bank Guarantee: As Per Clause 0600 Of No No Not Allowed Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 6 Warranty / Guarantee Period:As Per Clause 1200 Of No No Not Allowed Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 7 Neft/Rtgs/Ecs Payment:As Per Clause 2900 Of Instructions To No No Not Allowed Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 8 Gst Compliance:-As Per Clause 0906 Of Instructions To Tenderers No Yes Allowed And General Conditions Of Tender Indigenous Version 14 Of June (Optional) 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 9 Security Deposit (Sd): 1.0 All Successful Tenderer Shall Deposit No No Allowed Security Deposit (Sd) Amount @5% Of Contract Value Rounded Oï¬€ To (Optional) Nearest Higher Rs.10, Subject To Maximum Rs. 50 Lakhs For Contract Value Up To Rs 50 Cr. In Case Of Contract Value Above Rs 50 Cr. Sd Will Be Rs 1 Cr. 2.0 There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Following: I. The Contract Value Up To Rs.25 (Twenty Ï¬Ve) Lakhs. Ii. Other Railways And Government Departments. Iii. Indian Ordnance Factories. Iv. Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them. V. In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued. Vi. Kvic And Acash For Items Supplied By Them. Vii. Vendors Registered With Railways For The Trade Group Of The Item Tendered For Orders Valued Up To Their Monetary Limit Of Registration. Viii. Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core, Subject To Approval Status Being Valid On The Date Of Tender Closing. Ix. Vendors Registered With Railways For Supply Of Medicine, Medical Equipments And Consumables For These Items. 3.0 Security Deposit (Sd) Shall Remain Valid For A Period Of 60Days, Beyond The Date Of Completion Of All Contractual Obligations. 4.0 Sd From Successful Tenderer Should Be Received In Purchase Oï¬Ƒce Within 21 Days From The Date Acceptance Letter Issued By Purchaser. In The Event Of Successful Tenderer (S) Failing To Deposit/Submit Sd In Acceptable Form Within The Prescribed Period As Aforesaid, The Emd Submitted By Such Successful Tenderers Shall Be Automatically Adjusted Towards Sd. In Case Where Available Emd Amount Is Less Than Required Sd And The Successful Tenderer Does Not Deposit The Balance Sd Amount Within Stipulated Time, Then Emd Shall Be Forfeited And Case Be Dealt With As That Of Withdrawal Of Oï¬€Er By The Tenderer. Page 4 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 10 Security Deposit (Sd): 5.0 Wherever Sd Has Been Exempted, For No No Allowed Any Reason, And The Supplier Fails To Supply Goods As Per Conditions (Optional) Of Contract, As Amended From Time To Time, Purchaser Shall Have Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By Way Of Penalty, An Amount Equal To Sd Amount, As Would Have Been Applicable If The Contract Was With A Non-Exempted Vendor. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 6.0 Apart From Claiming Damages From Vendors, In Case Of Failure To Comply With The Contractual Obligations, Railways Shall Record Poor Performance Of The Vendors For Taking Suitable Penal Action. 7.0 Sd Can Be Submitted In Following Format: A. Dd In The Name Of Chief Cashier/Wr/Ccg. B. Fixed Deposit Receipt Duly Discharged And Stamped In Favour Of Fa&Cao(S) (Stock Items) Or Fa&Cao(X) (Non Stock Items) Or Fa&Cao(C) Churchgate, Western Railway As The Case May Be. C. Bank Guarantee: In Case Bank Guarantee Is Submitted By Supplier/Contractor, The Same Should Be In The Proper Prescribed Format For Bg As Per Annexure Available On Web Site Www.Ireps.Gov.In Website Link Western Railway/Pcmm. The Stamp Duty Shall Be @Rs.5/- Per Thousand Or Part Thereof For The Amount Secured For Such Deed. The Title Holder Of The Bg Shall Be President Of India Acting Through The Pfa/Ccg.8.0 Risk Purchase Clauses Shall Not Be Applicable. 11 All The Conditions Of Nit Are Available On Ireps Web Site. No No Not Allowed 12 Mse Clause:- (A) (I) Mse Participating In The Tender As Stipulated At No No Allowed Para (B) Below , Will Be Exempted From Payment Oï¬€ Earnest Money. (Optional) (Ii) In Tenders Participating Mses, As Para (B) Below Quoting As Price Within Price Band Of L-1 + 15% Shall Be Allow To Supply A Portion Of The Requirement By Bringing Down Their Price To L-1 Price In A Situation Where L-1 Price Is From Someone Other Than Mse And Such Mses Can Together Be Ordered Upto 25% Value Out Of The Net Procurement Quantity. (B) (I) Mses, Who Are Interested In Availing Themselves Of These Beneï¬Ts, Will Enclosed With Their Oï¬€Er A Copy Of Udyam Registration Certiï¬Cate Only. Mse Beneï¬Ts Will Not Be Admissible Based On Any Other Document. (Ii) Further, As Per Gazette Notiï¬Cation Dt.18.10.2022, Incase Of An Upward Change In Terms Of Investment In Plant And Machinery Or Equipment Or Turnover Or Both, And Consequent Re-Classiï¬Cation, An Enterprise Shall Continue To Avail Of All Non- Tax Beneï¬Ts Of The Category (Micro Or Small Or Medium) It Was In Before The Reclassification, For A Period Of Three Years From The Date Of Such Upward Change. All Mses Shall Be Eligible For Beneï¬Ts Of Public Procurement Policy Irrespective Of Product Category Under With Mses Are Registered. However, Traders/Authorized Dealers Will Not Be Eligible For Such Beneï¬Ts. (Iii)The 25% Quantity Shall Be Considered To Mse Including Quantity For Women Owned Mses & For Sc/St Owned Mses As Per Extant Rules And Only Be Considered If Valid Certiï¬Cate Issued By Nominated Agencies Is Uploaded Along With Oï¬€Er. If Documents Are Not Uploaded This Beneï¬T Will Not Be Given Totenderer. Only Oem/Manufacturers Will Be Given Beneï¬T Of Mse, Trader/Authorised Dealer Are Excluded From The Purview Of This Policy 13 Land Border Condition (A): Attention Of The Bidders Is Drawn To Yes Yes Allowed Special Conditions Regarding Restrictions On Procurement From A (Mandatory) Tenderer (Bidder) Of A Country, Which Shares A Land Border With India, Attached With This Tender.Bidders Should Note That Compliance To Land Border Condition (B) Of This Tender Schedule Is Mandatory. Bidders Are Required To Attach Evidence Of Valid Registration, If Applicable To Them. Non-Compliance Shall Result In Summary Rejection Of Their Oï¬€Er. Any False Declaration And Non- Compliance Of The Above Would Be A Ground For Immediate Termination Of The Contract And Further Legal Action In Accordance With The Laws. 14 Land Border Condition (B) : I Have Read And Understood Special Yes Yes Allowed Conditions Regarding Restrictions On Procurement From A (Mandatory) Tenderer(Bidder) Of A Country, Which Shares A Land Border With India, Attached With This Tender. I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered, With The Competent Authority. I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached. Page 5 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 Special Conditions S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Special Instructions For Machinery & Plant (M&P) Items : As No No Not Allowed Per Clause 3900 Of Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 2 Delivery Terms: 1) Dispatch Of The Machine: The Supplier Should No No Not Allowed Normally Dispatch The Machine Only After The Foundation Is Ready For Installation And Commissioning Of The Machine On Arrival. General Arrangement, Foundation & Related Drawings Of Machine Will Be Sent By The Firm To The Consignee Before Supply Of Machine For Approval Of Approving Oï¬Ƒcer Of Consignee. 2) Mode Of Dispatch/Delivery: The Supplier Shall Be Responsible For Transportation, Unloading Of The Equipment On Receipt And Its Movement To The Site Of Installation Including Provision Of Road Mobile Crane, Forklift Etc. 3 Marking: Materials Are To Be Invariably Stamped With No No Not Allowed Manufacturers Name, Month & Year Of Manufacture As May Be Detailed In The Drawing/Speciï¬Cation Of The Material, So That Warranty Can Be Correctly Acted Upon. Technical-Compliances S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 1. The Cost Is Inclusive Of Design, Manufacture, Supply, Erection And No No Not Allowed Commissioning, Bidder May Quote Separately Along With Concomitant Accessories And List Of Tools For Each Machine For Successful Operation Of Machine. 2. Calibration Certiï¬Cate Shall Be Provided For Any Kind Of Gauging/Measuring Instrument Installed On Machine With Validity Of 12 Months From The Date Of Commissioning. 3. Before Starting Of Manufacturing Of Machine It Is Required To Submit General Arrangement Drawing For Approval. 4. Before Dispatch Of Machine The Supplier Has To Complete The Foundation Work ( In No Case Machine Will Be Accepted By Consignee If Foundation Is Not Completed) 5. The Machine Will Not Be Accepted At Consignees Premises Unless The Passed Quality/ Quantity Inspection Certificate Of Rites/Inspection Agency Is Produced. 2 Bidders Are Required To Submit Complete Details Including Values, No No Allowed Write-Up, Drawings, Sketch, Brochure Etc. As Per Requirement (Mandatory) Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Oï¬€Er Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance Undertakings S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 1) Price Variation Clause:- Not Applicable. 2)I/We Agree To Supply The No No Not Allowed Tendered Stores At The Rates Quoted By Me/Us In Accordance With The Conditions Mentioned In This Tender & Its Documents And Conditions Available On Ireps. 3) I/We Also Conï¬Rm That Rates And Other Ï¬Nancial Terms Quoted In Relevant Columns Of Ï¬Nancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation 6. Documents Attached With Tender S.No. Document Name Document Description 1 5041595.Pdf Itt & Gcc Version 14 June 2024 2 4674190.Pdf Land Border Condition 3 4674206.Pdf Land Border Condition Amendment 4 4911496.Pdf Delivery Schedule 5 5041600.Pdf Revised Irs Conditions Of Contract_Sept 2022 6 5041674.Pdf Bid Document Part Ii 7 5041680.Pdf Annexure-I(Qap) Page 6 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 8 4674226.Pdf Tpi Condition The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Smm-M ( Ashok Kumar Meena ) , Concomitant Accessories For Dynamic Wheel Balancing Machine As Per Bid Docum Ent Part Ii Attached Below [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Contract Date: Apr 28, 2026 Contract Value : ₹ 50.20 Lakh

Government Departments No of Bidders 1

Maharashtra View Result →

40.

Public Administrative Department #10831385 Price Bid

Rigbore And Motor Installation With Chamber Near Milan Mandir Ramgaon At Part No 11/33 Under Jaigaon I Gram Panchayat Wthin Kalchini Block Work Id 109549094 Rigbore And Motor Installation With Chamber Near Milan Mandir Ramgaon At Part No 11/33 Under Jaigaon I Gram Panchayat Wthin Kalchini Block Work Id 109549094 , Labour For Boaring Throught Any Type Of Soil For Sinking Tube Well Of Required Dia. With Top Enlargement By Rig Boaring System ( Either By Reserve Circulation Or By Direct Rotary Method) Including Hire Charges And Labour For Rig Machine, Tools And Plants Staging Force Pumping Set And Making Arrangement For Water Required For Boaring Etc Complete And Lowering Of Pipes Strainers, Blind Pipes Etc, Complete. (B) Depth Upto 250 Metre For 150 Mm Dia, Tube Well Inlargement Of 200Mm La (Upto 50M) , (A) Sypply Of E.R.W.M.S.(Electrical Resistant Welded M.S.) Black Pipe Of Of Tata Make (Heavy Quality) As Per Standard Specification, 5 Mm Thick. (Ii) 100 Mm Dia. (Internal) , Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Of Schedule 80 (Medium Duty) Conforming To Astmd - 1785 And Threaded To Match With Gi Pipes As Per Is : 1239 (Part - I). With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted With Holder Bats Clamps, Including Cutting Pipes, Making Threads,Fitting, Fixing Etc. Complete In All Respect Including Cost Of All Necessary Fittings As Required,Jointing Materials And Two Coats Of Painting With Approved Paint In Any Position Above Ground. (Payment Will Be Made On The Centre Line Measurements Of Total Pipe Line Including All Specials. No Separate Payment Will Be Made For Accesories, Specials. Payment For Painting Will Be Made Seperately) . Pvc Pipes , Supply, Installation, Tesing & Lowering Of 2 Hp Water Filled Submersible Pump Motor Set Complete Having Suitable Discharge As Per Yeld Of Well. Submerisble Cable Of 30Mtr 3 Core 2.5 Sqmm That Cable (Finolex) With Moc Ber Chart (Crompon Make Pump) And Necessary Control Panel And Starter As Per Manufacturar Specifications.( Rate Arrived After Quatation Which Is Enclosed) , Collecting Sample Of Water For Bacteriological And Chemical Test From Any Depth At Any Time During Execution Of Work Including Hire And Labour Charges For Tools And Plants And Sterilising The Equipments, Paying All Charges And Fees, Testing Etc. Complete In All Respect As Per Direction , 125 Mm. Thick Brick Work With 1St Class Bricks In Cement Mortar (1:4) In Ground Floor. , Plaster (To Wall, Floor, Ceiling Etc.) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding/Staging Where Necessary (Ground Floor).[Excluding Cost Of Chipping Over Concrete Surface] (B) 15 Mm Thick Plaster(1:6) , Single Brick Flat Soiling Of Picked Jhama Bricks Including Rammering And Dressing Bed To Proper Level And Filling Joints With Local Sand. , (A) Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. (Payment To Be Made On Measurement Of Finished Quantity) , Ordinary Cement Concrete (Mix 1:2:4) With Graded Stone Chips (20 Mm Nominal Size) Excluding Shuttering And Reinforcement,If Any, In Ground Floor As Per Relevant Is Codes.(B) River Bazree , Artificial Stone In Floor, Dado, Staircase Etc.With Cement Concrete (1:2:4) With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinary White Cement (As Necessary) And Marble Dust In Proportion (1:2) I/C Smooth Finishing And Rounding Off Corners And I/C Application Of Cement Slurry Before Flooring Works, Using Cement @ 1.75 Kg/Sqm All Complete I/C All Materials And Labour.In Ground Foor .Ii) 25 Mm Thick. , Neat Cement Punning About 1.5Mm Thick In Wall, Dado, Window Sill, Floor Etc. Note:Cement 0.152 Cu.M Per100 Sq.M. , Makingof Precast Concrete Pillar 125Mmx125 Mm Thickdia Withnecessary Nut And Bolt Etc (Lmr) , Galvanised Corrugated Iron Sheet Work (Excluding The Supporting Frame Work) Fitted And Fixed With 10 Mm. Dia J Or L Hook-Bolts, Limpet And Bitumen Washers And Putty Complete With 150 Mm. End Lap And One Corrugation Minimum Side Lap. (Payment To Be Made On Area Of Finished Work)(Gci Sheet To Be Supplied By Contractor) , Supply & Installation Of Sutable Pump Control Panel With Volt Meter,Amp Meter & Dol Starter With Necessary Relay And Drawing Of Power Line From Main Maximum Up To 25Mtr. , Febrication Of Ms Structre With Base Plate And Fustnut / Jumpnut On The Basepanels On The Structure As Per Standard & Approved Drawing. Thepanels Will Then Be Connected To The Pump, Controller Which In Turn Will Be Connected To The Pump As Well As The Level Indicator Of The Water Tank As Per Direction Of The E.I.C. (Lmr) , Supplying, Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock/ Stop Cock Of Approved Brand And Make, Spray Painted And Tested To 21 Kg Per Sq. Cm. 20 Mm (1 Stop Cock + 2 Bib Cock) , Wood Work In Door And Window Frame Fitted And Fixed In Position Complete Including A Protective Coat Of Painting At The Contact Surface Of The Frame Exluding Cost Of Concrete, Iron Butt Hinges And M.S Clamps. (The Quantum Should Be Correted Upto Three Decimals). (D) Sal : Local. , Providing & Fixing Concrete Sign Board As Per Irc Specification Of Size 900 X 750 X 37 Mm. Thick Made With Rcc 1:1½:3 With Pakur Variety Stone Chips Reinforced With Double Layer Irc Febric (75 X 75 Mm. Mesh) And Fixed With Necessary Nuts & Bolts On Tworc Precast Posts 100 Mm. X 150 Mm. Of Height 2.65 M. Of Which Top 750 Mm. Is Of Section 100 X 13 Mm. And 1.90 Metre Above Gl & 0.75 Metre Below Gl Including Digging Hole, Repacking The Same With Cement Concrete 1:3:6 With Jhama Khoa Or With Localstone Chips Etc. Complete Including Painting Two Coats On Both Faces Lettering Sign Marks Etc. As Per Direction Of The Engineer-In-Charge. (The Rate Is Inclusive Of Cost Of Reinforcement, Concrete, Shuttering, Nuts & Bolts, Washer Etc. Complete.) , Gst @ 18% Of Gross Amount , Labour Welfare Cess @ 1% Of Gross Amount

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

West Bengal View Result →

41.

Public Administrative Department #10831384 Price Bid

Rigbore And Motor Installation With Chamber Near Laxmi Pradhan House At Ns Road Daragaon At Part No 11_35 Under Jaigaon I Gram Panchayat Within Kalchini Block Work Id 109549920 , Labour For Boaring Throught Any Type Of Soil For Sinking Tube Well Of Required Dia. With Top Enlargement By Rig Boaring System ( Either By Reserve Circulation Or By Direct Rotary Method) Including Hire Charges And Labour For Rig Machine, Tools And Plants Staging Force Pumping Set And Making Arrangement For Water Required For Boaring Etc Complete And Lowering Of Pipes Strainers, Blind Pipes Etc, Complete. (B) Depth Upto 250 Metre For 150 Mm Dia, Tube Well Inlargement Of 200Mm La (Upto 50M) Upto 50.0 Mtr , (A) Sypply Of E.R.W.M.S.(Electrical Resistant Welded M.S.) Black Pipe Of Of Tata Make (Heavy Quality) As Per Standard Specification, 5 Mm Thick. (Ii) 100 Mm Dia. (Internal) , Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Of Schedule 80 (Medium Duty) Conforming To Astmd - 1785 And Threaded To Match With Gi Pipes As Per Is : 1239 (Part - I). With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted With Holder Bats Clamps, Including Cutting Pipes, Making Threads,Fitting, Fixing Etc. Complete In All Respect Including Cost Of All Necessary Fittings As Required,Jointing Materials And Two Coats Of Painting With Approved Paint In Any Position Above Ground. (Payment Will Be Made On The Centre Line Measurements Of Total Pipe Line Including All Specials. No Separate Payment Will Be Made For Accesories, Specials. Payment For Painting Will Be Made Seperately) . Pvc Pipes , Supply, Installation, Tesing & Lowering Of 2 Hp Water Filled Submersible Pump Motor Set Complete Having Suitable Discharge As Per Yeld Of Well. Submerisble Cable Of 30Mtr 3 Core 2.5 Sqmm That Cable (Finolex) With Moc Ber Chart (Crompon Make Pump) And Necessary Control Panel And Starter As Per Manufacturar Specifications.( Rate Arrived After Quatation Which Is Enclosed) , Collecting Sample Of Water For Bacteriological And Chemical Test From Any Depth At Any Time During Execution Of Work Including Hire And Labour Charges For Tools And Plants And Sterilising The Equipments, Paying All Charges And Fees, Testing Etc. Complete In All Respect As Per Direction , 125 Mm. Thick Brick Work With 1St Class Bricks In Cement Mortar (1:4) In Ground Floor. , Plaster (To Wall, Floor, Ceiling Etc.) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding/Staging Where Necessary (Ground Floor).[Excluding Cost Of Chipping Over Concrete Surface] (B) 15 Mm Thick Plaster(1:6) , Single Brick Flat Soiling Of Picked Jhama Bricks Including Rammering And Dressing Bed To Proper Level And Filling Joints With Local Sand. , (A) Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. (Payment To Be Made On Measurement Of Finished Quantity) , Ordinary Cement Concrete (Mix 1:2:4) With Graded Stone Chips (20 Mm Nominal Size) Excluding Shuttering And Reinforcement,If Any, In Ground Floor As Per Relevant Is Codes.(B) River Bazree , Artificial Stone In Floor, Dado, Staircase Etc.With Cement Concrete (1:2:4) With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinary White Cement (As Necessary) And Marble Dust In Proportion (1:2) I/C Smooth Finishing And Rounding Off Corners And I/C Application Of Cement Slurry Before Flooring Works, Using Cement @ 1.75 Kg/Sqm All Complete I/C All Materials And Labour.In Ground Foor .Ii) 25 Mm Thick. , Neat Cement Punning About 1.5Mm Thick In Wall, Dado, Window Sill, Floor Etc. Note:Cement 0.152 Cu.M Per100 Sq.M. , Makingof Precast Concrete Pillar 125Mmx125 Mm Thickdia Withnecessary Nut And Bolt Etc (Lmr) , Galvanised Corrugated Iron Sheet Work (Excluding The Supporting Frame Work) Fitted And Fixed With 10 Mm. Dia J Or L Hook-Bolts, Limpet And Bitumen Washers And Putty Complete With 150 Mm. End Lap And One Corrugation Minimum Side Lap. (Payment To Be Made On Area Of Finished Work)(Gci Sheet To Be Supplied By Contractor) , Supply & Installation Of Sutable Pump Control Panel With Volt Meter,Amp Meter & Dol Starter With Necessary Relay And Drawing Of Power Line From Main Maximum Up To 25Mtr. , Febrication Of Ms Structre With Base Plate And Fustnut / Jumpnut On The Basepanels On The Structure As Per Standard & Approved Drawing. Thepanels Will Then Be Connected To The Pump, Controller Which In Turn Will Be Connected To The Pump As Well As The Level Indicator Of The Water Tank As Per Direction Of The E.I.C. (Lmr) , Supplying, Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock/ Stop Cock Of Approved Brand And Make, Spray Painted And Tested To 21 Kg Per Sq. Cm. 20 Mm (1 Stop Cock + 2 Bib Cock) , Wood Work In Door And Window Frame Fitted And Fixed In Position Complete Including A Protective Coat Of Painting At The Contact Surface Of The Frame Exluding Cost Of Concrete, Iron Butt Hinges And M.S Clamps. (The Quantum Should Be Correted Upto Three Decimals). (D) Sal : Local. , Providing & Fixing Concrete Sign Board As Per Irc Specification Of Size 900 X 750 X 37 Mm. Thick Made With Rcc 1:1½:3 With Pakur Variety Stone Chips Reinforced With Double Layer Irc Febric (75 X 75 Mm. Mesh) And Fixed With Necessary Nuts & Bolts On Tworc Precast Posts 100 Mm. X 150 Mm. Of Height 2.65 M. Of Which Top 750 Mm. Is Of Section 100 X 13 Mm. And 1.90 Metre Above Gl & 0.75 Metre Below Gl Including Digging Hole, Repacking The Same With Cement Concrete 1:3:6 With Jhama Khoa Or With Localstone Chips Etc. Complete Including Painting Two Coats On Both Faces Lettering Sign Marks Etc. As Per Direction Of The Engineer-In-Charge. (The Rate Is Inclusive Of Cost Of Reinforcement, Concrete, Shuttering, Nuts & Bolts, Washer Etc. Complete.) , Gst @ 18% Of Gross Amount , Labour Welfare Cess @ 1% Of Gross Amount

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

West Bengal View Result →

42.

Housing Urban and Rular Development #10803700 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Maharashtra View Result →

43.

Defence #10776168 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Karnataka View Result →

44.

Railways #10756481 AOC

Contract Date: Apr 10, 2026 Contract Value : ₹ 4.57 Crore

Government Departments No of Bidders 1

Haryana View Result →

45.

Railways #10755501 AOC

Contract Date: Apr 11, 2026 Contract Value : ₹ 1.93 Crore

Government Departments No of Bidders 1

Odisha View Result →

46.

Railways #10747849 AOC

Contract Date: Apr 17, 2026 Contract Value : ₹ 2.77 Crore

Government Departments No of Bidders 1

Rajasthan View Result →

47.

Railways #10740942 AOC

Contract Date: Apr 20, 2026 Contract Value : ₹ 14.55 Crore

Government Departments No of Bidders 1

Uttar Pradesh View Result →

48.

Railways #10737503 AOC

Contract Date: Apr 22, 2026 Contract Value : ₹ 2.03 Crore

Government Departments No of Bidders 1

Tamil Nadu View Result →

49.

Public Administrative Department #10714170 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

50.

Drinking Water Supply and Sanitation #10713558 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

West Bengal View Result →

TenderDetail

Loading tenders