Search all local Tender for Aluminium Frame. Download Aluminium Frame Tender Documents. Till date 18 Aluminium Frame tenders are published by various Tendering Authorities & Private companies. 18 live Tender Notices for Aluminium Frame are available in Aluminium Frame Tender section. Filter tenders to view Aluminium Frame Tenders in Maharashtra, Gujarat, Delhi etc.
tender for screen type sun visor item list :- (1) screen type sun visor as per part no. vo21554022 of valva make , model no. ctsv0001 of m/s creative tools and lifting rackels or its equivalent. technical details: manual retract mechanis(mrm) type sun visor with aluminium frame and grey polyester screen. the dimension fo the screen when open shall be height:31 inches x width 32 inches. the supplied unit shall inculde the comprehensive fixing arrangement kit consisting of aluminium rods, shock absorbing washers and base mounting clas with appropiate screw.
tender for ) front side of theitem list :- (1) (1) front side of the each, flex should be bonded with aluminium frame in four sides, back side of the each to be pasted on a g i sheet of 28/30 swg with m s hollow square bar and should have suitable hooks for fixing bracket/wall/window (2)all flex should be colour & english version. (3)flex size, colour of flex & letter size of flex are as per sample (sample- a to f) for 87.88 sq.ft. size of each sample =(a)& (b)= 7'x4', (c) & (e) =3'x1.5', (d) =6.8'x1.6' , (f) = 4'x3'.
supply of all kinds of hardware items for different construction work under rd satchand division.-39 iron gumla 40 velcha 41 iron bucket 42 hacksaw blade 43 hacksaw frame 44 board pin 45 dhari mat (1.37m x 1.83 m) 46 gi screw 47 door lock link( upto 50 mm width / dia) 48 door lock (link)( more than 50 mm width / dia) 49 plain glass (3 mm thick) 50 plain glass (4 mm thick) 51 plain glass (6 mm thick) 52 colouring glass with shade (3 mm thick) 53 colouring glass with shade (4 mm thick) 54 one way colouring glass (3 mm thick) 55 one way colouring glass (4 mm thick) 56 one way colouring glass (5 mm thick) 57 one way colouring glass (6 mm thick) 58 glass panes (frosted) 3mm thick and 25 mm width for tiles fitting. 59 glass panes (frosted) 4mm thick and 25 mm width for tiles fitting. 60 providing & fitting fixing of anodized aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge. 61 providing & fitting fixing of anodized aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge. 62 providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge.
supply of all kinds of hardware items for different construction work under rd satchand division.-69 providing & fitting fixing of false ceiling with 12 mm thick prelaminated particle board with approved & standard aluminium section @ 600 mm c/c in both way including painting for the complete job as per direction of eng.-in-charge. 70 (b) color coated aluminium framed providing & fitting fixing of aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge. 71 providing & fitting fixing of aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge. 72 providing & fitting fixing of aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge. 73 providing & fitting fixing of aluminium framed window upper part fixed & openable shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge. 74 providing & fitting fixing of curtain wall over aluminium section with 5 mm reflective glass with necessary accessories as required for the complete job as per direction of engineer – in-charge ( section specification sub mullion 63 mm x 81 mm, jointer 57.70 mm x 75.20 mm)
supply of all kinds of hardware items for different construction work under rd satchand division.-75 providing & fitting fixing of drapery rods have corrugated electric resistance welded ms pipes of 19 mm diameter fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of engineer-in-charge 76 providing & fitting fixing of aluminium fixed louvers width of 60mm (vista) and fixed with rawl plugs, rivet and stainless screws with necessary accessories as required for the complete job as per direction of engineer-in-charge. ( section specification z section 2.25” , u section 2”. 77 providing & fitting fixing of stainless steel railings(vista) with round/square/wooden top handrail for staircase/balcony/atrium and fixed with rawl plugs and stainless steel screws with necessay accessories as required for the complete job as per direction of engineer-in-charge 78 providing & fitting fixing of vertical blinds with pvc based fabric of louver width of 50 mm (vista) and fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of engineer-in-charge. 79 providing & fitting fixing of aluminium framed louver (horizontal blinds) width of 25 mm (vista) and fixed with royal plugs and necessary accessories complete as per direction of engineer-in-charge. 80 providing & fitting fixing of vertical blinds with polyester based fabric of louver width of 100 mm (vista) and fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as per direction of engineer-in-charge. 81 providing & fitting fixing over aluminium section fir acp work for exterior/interior purpose of the out side/in side of the building with 3 mm acp sheet (one side color) (alstrong or eurobond) and fixed with rawl plugs and stainless steel screws with necessary accessories as required for the complete job as
supply of all kinds of hardware items for different construction work under rd satchand division.-63 providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge 64 providing & fitting fixing of fixed aluminium framed partition with 12 mm prelaminated particle board / 4mm plain or coloring glass incl. door etc and necessary accessories as required for the complete job as per direction of engineer-in-charge. 65 providing & fitting fixing of fixed 1, 50 mm thick suitable aluminium framed partition with 4 mm plain or coloring glass providing opening for door etc and necessary accessories as required for the complete job as per direction of engineer-in-charge. 66 providing & fitting fixing of 1.5mm thick aluminium framed (3.5”x1.75”) door based on hydraulic floor spring, made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with upper / lower closer and necessary accessories as required for the complete job as per direction of engineer-in-charge. 67 providing & fitting fixing of twin type door hydraulic floor spring based, made of 12 mm thick plain or coloring glass with suitable standard & approved aluminium frame in top and bottom including necessary accessories as required for the complete job as per direction of engineer-in-charge. 68 providing & fitting fixing of 1.5mm thick aluminium framed (3.5”x1.75”) hinge swing door made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with necessary accessories as required for the complete job as per direction of eng.-in-charge.
tender for supply of constructional stores:-1.01 bricks ist class 1.02 lime 1.03 paint ( white-100 ltr, olive green-120 ltrs, po red -01 ltr golden-01 ltr redoxide primer-80 1.04 hardwood 7'' x 4" x 3" 1.05 providing of doors 1.00m x 2.10 m of hard wood frames of 4" x 3" wth fly proof mesh shutter outside and water proof 11 / 2" flush door frames indise with complete fitment ( hinges, sliding bolt, handles, stopper, tower bolt, hold fasts, hydraulic door closure etc ) ( d ) ( except door frame ) 1.06 providing of doors hardwood frames and shutters size 0.75 mtr x 2.10 mtr of aluminium frames with complete fitment ( hinges, sliding bolt, handles, stopper, tower bolt, hold fasts, etc ) ) ( d1 ) 1.07 providing of windows size 1.80 x 1.20 mtr with hard wood frames 4" x 3" outer and 4" x 2" intermediate vertical with inside fly proof shutters and outside glazed shutter four pannels with complete fitments ( hinges, sliding bolt, handles, stopper, tower bolt, hold fasts, etc ) ( w ) 1.09 ac sheets 4'' x 4'' x 4 mm 1.1 aluminium channels / t 1 ⅟₂ " x 1 ⅟₂ " in 4'' x 4'' 1.11 aluminium channels / t 1 " x 1 " in 4'' x 4'' 1.12 white cement based putty 1.13 washable distemper brick-20kgs, pearl cream ( code-386 ) -200 kgs, phiroza blue ( code-160 ) -40 kgs, satin blue ( code-186 ) -40 kgs 1.14 cgi sheet ( size8'' x 3'' x 18 gauage 1.15 urinal with complite fitment 1.16 european type wc with complete fitment ( parry ware ) 1.17 washbasin with complete fitment 1.18 vitrified floor tiles 600 x 600 mm make orient bell vitrified ) 1.19 ceramic wall tiles 12" x 9" make-omken 1.2 provisioning of gate iron in two part including complete fitment size 4.20 x 2.10 mtrs 1.21 providing of office wooden table 1.22 providing of office chair 1.23 providing of steel almirah 1.24 providing of book shelf ( glass window ) 1.25 ms pipe 4" dia 20'' long 1.26 ms plate 6"x6"x6mm 1.27 ms pipe 31.6 mm dia 20'' long
tender for provision of general equipment store at naval radar detachment and provision of partition in ops room at neil det at neil island under ge ( p ) central:-material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. , material and labour for pre-painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm of any colour, material and labour for anodised (minimum 15 micron thick anodising) aluminium door shutters, aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified. , supply and fixing solid pvc door frame , supply and fixing factory made solid panel pvc door shutter 30mm thick (style) , supply and fixing butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type b-21 100mm size , supply and fixing 150 mm long extruded aluminium alloy handles, fabricated type, anodised. , supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed of size 150 mm , material and labour for 12mm thick prelaminated particle board both side with decorative laminated for doors, both sides decorative choice laminated cut to size and fix in door panel as directed. , material and labour for 3.0 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 sqm in each pane and glazing with pvc rubber gasket suitable for aluminium framing complete all as directed , material and labour for aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed. ,
day to day maintenance of b / r items at kanasar military station, ca no. ge ( p ) kns-15 / 2018-19 - 1 1.00 old u / s chowkat with shutter area exc. 1.5 sqm but not exc. 4 sqm each including old hardware. 2 6.00 old u / s tiles 2 22.00 old u / s gi pipe 15mm bore with fittings 3 23.00 old u / s gi pipe 20mm bore with fittings 4 26.00 old u / s stop valve 15 mm bore 5 27.00 old u / s bib tap 15mm bore 6 28.00 old u / s pvc tank 500 ltr capacity 5 29.00 old u / s pvc tank 1000 ltr capacity 6 31.00 old u / s ball brass valve 15mm bore 7 34.00 old u / s pvc low level flushing cistern 8 35.00 & 36.00 old u / s mixer 15 mm bore 9 37.00 old u / s gun metal glove / gate valve 9 45.00 old u / s aluminium door closer any size 10 46.00 old u / s double action floor spring any size 11 47.00 old u / s floor door stopper 11 47.00 old u / s aluminium frame for doors 10 48.00 old u / s aluminium shutter 12 52.00 old u / s safety lever locks 13 53.00 old u / s ball bearing 14 55.00 old u / s iron scrap 15 58.00 old u / s bricks / brick bats 16 60.00 to 68.00 old u / s material retrieved from these items 17 69.00 old u / s curtain rod 18 70.00 old u / s looking mirror 19 71.00 old u / s spray jet
corrigendum - day to day maintenance of b / r items at kanasar military station, ca no. ge ( p ) kns-15 / 2018-19 - 1 1.00 old u / s chowkat with shutter area exc. 1.5 sqm but not exc. 4 sqm each including old hardware. 2 6.00 old u / s tiles 2 22.00 old u / s gi pipe 15mm bore with fittings 3 23.00 old u / s gi pipe 20mm bore with fittings 4 26.00 old u / s stop valve 15 mm bore 5 27.00 old u / s bib tap 15mm bore 6 28.00 old u / s pvc tank 500 ltr capacity 5 29.00 old u / s pvc tank 1000 ltr capacity 6 31.00 old u / s ball brass valve 15mm bore 7 34.00 old u / s pvc low level flushing cistern 8 35.00 & 36.00 old u / s mixer 15 mm bore 9 37.00 old u / s gun metal glove / gate valve 9 45.00 old u / s aluminium door closer any size 10 46.00 old u / s double action floor spring any size 11 47.00 old u / s floor door stopper 11 47.00 old u / s aluminium frame for doors 10 48.00 old u / s aluminium shutter 12 52.00 old u / s safety lever locks 13 53.00 old u / s ball bearing 14 55.00 old u / s iron scrap 15 58.00 old u / s bricks / brick bats 16 60.00 to 68.00 old u / s material retrieved from these items 17 69.00 old u / s curtain rod 18 70.00 old u / s looking mirror 19 71.00 old u / s spray jet
tender for providing fly proof stainless mesh with aluminium frame for window to 25 nos, type ill staff quarters (iii/15 to 39), 8 nos of type iv quarters (iv/6 to 11) and (iv special 12 & 13), 2 nos of type v quarters(v/2, v/3)
providing fly proof stainless steel mesh with aluminium frame for windows to 25 nos. quarters, type iii staff quarters iii/15 to 39 8 nos of type iv quarters iv/6 to 11 and type iv special 12 and 13 2 nos. of type v qrtrs v/2, v/3 at epfo jalahalli, bangalore
tender for provision of furniture for avionic workshop at ins hansa and def single living accommodation for sailors at nih goa under ge gomantak vasco, -1 chair easy - fd-229 2 chair writing - fd-280 3 charpoy with hard top - fd / map-ii / 01 4 table with drawer ( 900x600x760 ) - fd-283 5 chair wooden bottom without arms - fd-285 6 table ( 600x600x760 ) - fd-95 ( m ) 7 table without drawer ( 900x600x760 ) - fd-284 8 work bench avoinic type ''a'' with sunmica top 7''x3''x2''-10'' 9 stool for pot chamber - fd-286 10 wooden rack open with 4 shelves - wdf / 55 / 07 11 board notice ( 1830mmx1220mm ) - fd-99 ( m ) 12 s & f 12mm plywood bwr grade isi mark on top 7''x3'' with 1mm thick top laminatin of work bench with 2.5"x1 / 2" teak wood beading all around of the top duly polished and new locking arrangement of door for drawer and shelves shutter. 13 locker steel - fd- 1029 14 table clerk ( steel ) - fd-1004 15 chair c.b. steel with arms - fd-75 ( m ) 16 chair c.b. steel without arms - fd-75 ( m ) 17 hexa melamine ( non-magnetic ) whiteboard, lightweight aluminium frame ( 6''x4'' ) - model no : tfwbnm of make : nechams ( tp )
corrigendum - tender for provision of furniture for avionic workshop at ins hansa and def single living accommodation for sailors at nih goa under ge gomantak vasco, -1 chair easy - fd-229 2 chair writing - fd-280 3 charpoy with hard top - fd / map-ii / 01 4 table with drawer ( 900x600x760 ) - fd-283 5 chair wooden bottom without arms - fd-285 6 table ( 600x600x760 ) - fd-95 ( m ) 7 table without drawer ( 900x600x760 ) - fd-284 8 work bench avoinic type ''a'' with sunmica top 7''x3''x2''-10'' 9 stool for pot chamber - fd-286 10 wooden rack open with 4 shelves - wdf / 55 / 07 11 board notice ( 1830mmx1220mm ) - fd-99 ( m ) 12 s & f 12mm plywood bwr grade isi mark on top 7''x3'' with 1mm thick top laminatin of work bench with 2.5"x1 / 2" teak wood beading all around of the top duly polished and new locking arrangement of door for drawer and shelves shutter. 13 locker steel - fd- 1029 14 table clerk ( steel ) - fd-1004 15 chair c.b. steel with arms - fd-75 ( m ) 16 chair c.b. steel without arms - fd-75 ( m ) 17 hexa melamine ( non-magnetic ) whiteboard, lightweight aluminium frame ( 6''x4'' ) - model no : tfwbnm of make : nechams ( tp )
supply of aluminium frame corner key - 3, 35, 000 sets ( 2 types ) for solar pv module
providing fly proof stainless steel mesh with aluminium frame for windows to 25 nos. quarters, type iii staff quarters iii / 15 to 39 8 nos of type iv qrtrs iv / 6 to 11 and type iv special 12 and 13 2 nos. of type v qrtrs v / 2, v / 3 at epfo jalahalli, bangalore, tender notification
rate contract for repairing / maintenance of office furniture items of ministry of steel - b. upholstery of executive / revolving ( low back ) chair labour charges only c. upholstery of executive / revolving ( high back ) chair labour charges only d. upholstery of durian chair labour charges only e. upholstery of visitor chair ( wooden ) labour charges only f. upholstery of steel chair labour charges only 8 ) cloth / curtain / cushion / u foam a. cushion for sofa ( 21”x22”x4” ) b. cushion for chairs ( 18”x18”x2” ) c. sleep well high density u foam d. plain curtain e. plated curtain ( with marking lining ) f. sofa covers ( white tricot cloth ) g. cloth for upholster of sofa / chair h. i. cotton i. ii. cottarise j. iii. velvet k. iv silk l. v khadi silk m. vi. handloom 9 ) miscellaneous a. supply / fixing of laminated sun mica b. opening of security lock c. repairing of security lock d. supply of brass key for security lock e. opening of link lock f. repairing of link lock g. supply of key for link lock h. a / c fitting ( with material ) i. a / c fitting ( without material ) j. providing / fixing of glass window with aluminium channel k. providing / fixing of vertical blind l. repairing of vertical blind m. re-fixing of vertical blind n. providing / fixing of mirror ( teak wood 6” frame with brass accessory ) o. supply / fixing of cupboard brass lock p. supply / fixing of brass multipurpose lock q. providing / fixing of wooden partition ( teak broad ) r. providing / fixing of aluminium partition s. supply / fixing of acrylic sheet t. supply of acrylic writing desk u. supply of wooden writing desk v. providing / fixing of branded ceramic tiles ( with material ) w. providing / fixing of branded vitrified tiles ( with material ) x. providing / fixing of aluminium grill with frame y. providing / fixing of notice board with aluminium frame z. providing of wooden coat stand with brass fitting aa. orthopedic back rest / cushion
supply of aluminium frame & corner key - 3,35,000 sets (2 types) for solar pv module
Copyright © 2019 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
