Educational and Research Institute Boards / Undertakings / PSU Closing in 4 days TDR #58496164

Tender For C/O Ms Framed Shed For Optimizer & Dg Set, Fabrication Of Aluminium Cabin And Miscellaneous Repair Works At Vc Secretariat, Dharamshala (Sh: Structural Steel Work, Roofing, Wall Covering, Concrete Platform, Paintwork, Aluminium Partition/Door/W

Issued by Boards / Undertakings / PSU · dharamshala, Himachal Pradesh
Tender Value
2.83 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Offline

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
dharamshala → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For C/O Ms Framed Shed For Optimizer & Dg Set, Fabrication Of Aluminium Cabin And Miscellaneous Repair Works At Vc Secretariat, Dharamshala (Sh: Structural Steel Work, Roofing, Wall Covering, Concrete Platform, Paintwork, Aluminium Partition/Door/Window, Glazing Etc.) Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge: All Kinds Of Soil Sqm 9.68 2 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40Mm Nominal Size Derived From Natural Sources) Cum 0.880 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Cum 2.062 4 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Kg 57.71 5 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Kg 612.13 6 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Sqm 8.00 7 Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) : 25 Mm Thick Sqm 4.16 8 Extra For Pre Finished Nosing In Treads Of Steps Of Kota Stone/ Sand Stone Slab. Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer -In -Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5 -7 Microns Epoxy Primer On Both Sides Of The Sheet And Polyester Top Coat 15 -18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer -In -Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. Sqm 65.40 10 Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete. Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1.4 Mm Aperture On Both Sides Sqm 1.80 11 Wall Painting With Acrylic Emulsion Paint, Having Voc Content Less Than 50 Grams/Litre, Of Approved Brand And Manufacture Including Applying Additional Coats Wherever Required To Achieve An Even Shade And Colour: One Coat Sqm 73.21 12 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade - One Or More Coats On Old Work Sqm 19.39 13 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete Sqm 0.80 14 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer -In -Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately). For Fixed Portion: Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) Kg 41.51 15 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer -In -Charge. (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) Sqm 2.69 Page 5 Of 5 16 Providing And Fixing Aluminium Sliding Door, Window, Ventilators With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285 Having Channel Sections And Rollers For Smooth Movement Including Glazing/ Panelling, Door Frame, Handles, Lock Etc. Complete. Sqm 3.21 17 Providing And Fixing 4 Mm Thick Acp Sheet Exterior Grade In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With Epdm Rubber / Neoprene Gasket Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. Sqm 13.61 18 Providing And Fixing Self Adhesive Pvc Frosted Film Plain/Grooved/Printed On Float Glass Panes Fixed In Aluminium Partitions.

AI Tender Summary

OUR REF NO 58496164
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 2.83 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name central university of himachal pradesh
Work Description Tender For C/O Ms Framed Shed For Optimizer & Dg Set, Fabrication Of Aluminium Cabin And Miscellaneous Repair Works At Vc Secretariat, Dharamshala (Sh: Structural Steel Work, Roofing, Wall Covering, Concrete Platform, Paintwork, Aluminium Partition/Door/Window, Glazing Etc.) Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge: All Kinds Of Soil Sqm 9.68 2 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40Mm Nominal Size Derived From Natural Sources) Cum 0.880 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Cum 2.062 4 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Kg 57.71 5 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Kg 612.13 6 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Sqm 8.00 7 Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) : 25 Mm Thick Sqm 4.16 8 Extra For Pre Finished Nosing In Treads Of Steps Of Kota Stone/ Sand Stone Slab. Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer -In -Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5 -7 Microns Epoxy Primer On Both Sides Of The Sheet And Polyester Top Coat 15 -18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer -In -Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. Sqm 65.40 10 Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete. Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1.4 Mm Aperture On Both Sides Sqm 1.80 11 Wall Painting With Acrylic Emulsion Paint, Having Voc Content Less Than 50 Grams/Litre, Of Approved Brand And Manufacture Including Applying Additional Coats Wherever Required To Achieve An Even Shade And Colour: One Coat Sqm 73.21 12 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade - One Or More Coats On Old Work Sqm 19.39 13 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete Sqm 0.80 14 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer -In -Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately). For Fixed Portion: Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) Kg 41.51 15 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer -In -Charge. (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) Sqm 2.69 Page 5 Of 5 16 Providing And Fixing Aluminium Sliding Door, Window, Ventilators With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285 Having Channel Sections And Rollers For Smooth Movement Including Glazing/ Panelling, Door Frame, Handles, Lock Etc. Complete. Sqm 3.21 17 Providing And Fixing 4 Mm Thick Acp Sheet Exterior Grade In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With Epdm Rubber / Neoprene Gasket Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. Sqm 13.61 18 Providing And Fixing Self Adhesive Pvc Frosted Film Plain/Grooved/Printed On Float Glass Panes Fixed In Aluminium Partitions.
Basic Detail
Tender No 06/2026-27/CUHP/ENGG/NIQ
Bidding Type Tender
Location
City dharamshala
State Himachal Pradesh
Key Dates
Publish Date 12 Nov 2026
Submission Date 19 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 2.83 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
04451a9f-55bb-4ae7-a855-09a0a70fe6d3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Offline submission at the designated office.

Upcoming · 4 days
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
pdf

04451a9f-55bb-4ae7-a855-09a0a70fe6d3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender