|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm |
| 2 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:Bituminous road. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Engagment of labour for for cleaning of walls,floors etc with chemicals & broom/cloth including disposal of waste |
| 5 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 6 | Earth work in Excavation by manual means over areas ( exceeding 30cm and up to 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth up to 1 mtr from cutting edge, disposed earth is to be leveled and neatly dressed in All kinds of soils. |
| 7 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc.,disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge. |
| 8 | \\"Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm\\" |
| 9 | \\"Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :\\"\\"\\" |
| 10 | \\"Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.\\" |
| 11 | Providing and applying white cement based putty of 1mm thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | Distemper with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats ) over and including priming coat with cement primer including all carriages and cost of materials involved. |
| 13 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 15 | \\"Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)\\". |
| 16 | \\"Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying apriming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces\\" |
| 17 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 18 | Providing and fixing of electric bulb including all fitting/wires |
| 19 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not lessthan 810 gms. |
| 20 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | \\"Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500Dor more\\" |
| 22 | Centering and Shuttering including strutting, propping etc. and removal of Formwork for foundation complete job |
| 23 | Providing and fixing of exhaust fan including all fitting/wires |
| 24 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 25 | Providing and Fixing of 3 seater iron benches with complete all job. ( Deggi) |
| 26 | 12mm thick cement plaster of mix 1:6 |
| 27 | P/F of 60mm thick interlocking paver tile to be laid in cement mortar 1:4 mix & fill joint with C.mortar 1:3 mix complete job |
| 28 | Laying old cement concrete interlocking paver block of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. All complete as the directions of Enghineer-in-charge |
| 29 | Engagement of Painter |
| 30 | Engagement of Helper |
| 31 | Removal of Excavated Malba dismantled unserviceable material from site of work. |
| 32 | Providing and Laying DPC 50mm thick with cement concrete 1:2:4 |
| 33 | Providing and Fixing of inaguration stone |
| 34 | Carriage of constructed material (sand + Aggregate) Please Enable Macros to View BoQ information |
