Dismantling and removal of Intermediate and Mud Tray and Boot of Clarifier Compartment No 4 fabrication and installation of new components from 8 and 10 mm thick MS plate including all associated works leak proof testing and satisfactory trial Clarifier Size Dia 10 m
2
Mechanical Fabrication 2
Dismantling and removal of damaged Flash Tank installed on Clarifier fabrication of new Flash Tank from 8 and 10 mm thick MS plate fabrication of 12 and 14 siphon pipe 2 m long raw U bend chimney and associated fittings complete with satisfactory trial Tank Size Dia 2 m X Height 2 m 2cm
3
Mechanical Fabrication 3
Dismantling of top portion of Juice Sulphiter Recovery Tower fabrication and installation of new top portion from 8 and 10 mm thick MS plate reconnection of all associated fittings satisfactory trial and disposal of scrap to scrap yard Size Dia 1m60 cm X Length 1m50 cm
4
Mechanical Fabrication 4
Dismantling and removal of damaged Perforated and Baffle Plate inside Juice Sulphiter fabrication and installation of new perforated and baffle plate from approx 8 mm thick plate of Dia 3m50 cm providing approximately 280 holes and angle supports complete with satisfactory trial
5
Mechanical Fabrication 5
Dismantling and replacement of bottom plates of both Lime Tanks with new 8 and 10 mm thick MS plate including disposal of scrap Tank Size Dia 4m25 cm
6
Mechanical Fabrication 6
Dismantling and replacement of top gutter of both Lime Tanks with new 8 and 10 mm thick MS plate including disposal of scrap Approx Length 4 m
7
Mechanical Fabrication 7
Dismantling and removal of damaged 6 gas line and cooling pipe of Sulphur Furnace installation of new pipeline and disposal of scrap
8
Mechanical Fabrication 8
Shifting of Spray Vertical Pump complete with VFD 38A Motor and accessories from Mill House to Spray Pond using crane and hydra installation of pump and motor with all accessories fabrication of pump bed fabrication and modification of inlet and outlet connections installation of valves and satisfactory load trial
9
Mechanical Fabrication 9
Dismantling and replacement of damaged C Light Molasses Conditioner (Approx Size Length 2 m X Dia 2 m) fabrication from 8 and 10 mm thick MS plate reinstallation and alignment of drive shaft arm reduction gearbox and associated components with satisfactory trial Working height approx 45 ft
10
Mechanical Fabrication 10
Dismantling and removal of damaged Rectangular Cold Water Tank at Pan Station disposal of scrap fabrication and installation of new tank from 10 and 12 mm thick MS plate including all valves connections leak proof testing and satisfactory trial Approx Size Length 5m60 cm X Width 2m30 cm X Height 2m80 cm Working height approx 60 ft
11
Mechanical Fabrication 11
Dismantling and removal of damaged Rectangular Hot Water Tank at Pan Station disposal of scrap fabrication and installation of new tank from 10 and 12 mm thick MS plate including all valves connections leak proof testing and satisfactory trial Approx Size Length 5 m 60 cm X Width 2 m30 cm X Height 2 m 80 cm Working height approx 60 ft
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
