|
| 1 | Total Amount of BoQ 2 |
| 2 | Amount after unconditional Rebate |
| 3 | Electrical Works |
| 4 | SCHEDULE-1 ACOUSTICS |
| 5 | CEILING : Conference Hall ceiling Acoustic Treatment with Interior Decoration: Providing and fixing false ceiling which includes providing and fixing of G.I. frame, which includes providing and fixing GI perimeter channels of size 0.5 mm thick having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to wall/ partition/ceiling with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thick with two flanges of 15 mm each from the soffit at 1000 mm centers with ceiling angles with ceiling angle of width 25mm x 10mm x 0.5mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.5 mm thick having web of 51.5 mm and two flanges of 26 mm each with lips of 10.5mm are then fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel will be placed in opposite direction with an interval of approx. 600 centre to centre in one direction, all the framing materials of good quality makes. Acoustical backing by Poly fiber wool of thickness 50mm having density of 20kg/m3 tie up by Galvanized wire. 12.5 mm tapered edge gypsum-board (Confirming to IS-2095- 1982) is then screw fixed to ceiling section with 25 mm dry wall screws at 230mm centers. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment with smooth finish. 12.5 mm thick Gypsum board to be fixed in the border area and in drop ceiling area. Design of ceiling to be made for popper sound reproduction. Rate includes all labour, materials, transporation, tools & plants, scaffolding, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 6 | CEILING : Conference Hall ceiling Acoustic Treatment with Interior Decoration- Providing and fixing false ceiling which includes providing and fixing of G.I. frame, which includes providing and fixing GI perimeter channels of size 0.5 mm thick. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to wall/ partition/ceiling with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm, 0.9mm thick with two flanges of 15 mm each from the soffit at 1000 mm centers with ceiling angles with ceiling angle of width 25mm x 10mm x 0.5mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.5 mm thick having web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm are then fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel will be placed in opposite direction with an interval of approx. 600 centre to centre in one direction. Acoustical backing by Poly fiber wool of thick-ness 50mm having density of 20kg/m3 tie up by Galvanized wire. P r o v i d i n g Pixel Micro Perforated acoustical board of12.5 mm . thick taper edge Gypsum plaster board of 2400x 1200 x 12.5 mm full/random perforated NRC minimum upto 0.75 and fire class A2-S1, d0, density 800 kg/M3, Moisture Resistance RH 70 and light reflectance 70%. Design of ceiling to be made for popper sound reproduction. Rate includes all labour, materials, transporation, tools & plants, scaffolding, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 7 | CEILING : Supply and Installation and commissioning of acoustical board white colour of tegular edge Glass fibre core ceiling tile of size 595x595x 15 mm having density 120kgs/ m3, weight 1.8-3.0 kg/sqm which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15 grid system.The technical parameters are as follows : core - Glass fibre, Fire - class 1 & P, Acoustics - NRC 0.9 minimum, Climate (OC RH) - 40, 95, Termite resistance, Light reflectance - 85%, Green (RC %) -35, Hygiene (VoC, Clean room)- Low, Class 3 Strenght, Load capacity (Kg)-antisag including 'T' grid frame work of 24mm Grid - Hot Dipped Galvanized steel suspension System having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees. Installation: To comprise main runner spaced at 1200mm centers securely fixed to the structural socket by approved hanger at 1200mm maximum center. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm center to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles or channel, secured to walls at 450 mm maximum centers. ( Specification may vary slightly upon selection of actual product by the Engineer in Charge). Rate includes all labour, materials, transporation, tools & plants, scaffolding, lead, lift, etc. complete. Make: The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 8 | WALL ( UPTO 4FT FROM FLOOR) : Providing and fixing wall paneling, which includes providing and fixing of G.I. frame, which includes providing and fixing GI perimeter channels of size 0.5 mm. Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the wall, screw fixed to brick wall/ partition with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm, 0.9mm thk with two flanges of 15 mm each from the soffit at 1000 mm centers with angle of width 25mm x 10mm x 0.5mm thk fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.5 mm thk having web of 51.5 mm and two flanges of 26 mm each with lips of 10.5mm are then fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel will be placed in opposite direction with an interval of approx 600 centre to centre in one direction, all the framing materials of made of good quality makes. Acoustical backing by Poly fiber wool of thickness 50mm having density of 1000 GSM tie up by Galvanized wire & wire mesh to avoid sagging. Acoustical Wooden Slat grooves & laminated boards 16mm thlck size 128 x 2440 mm as per acoustic design / Architects' approval with melamine finish. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 9 | Acoustical work of Side & Back wall above dado (above 4ft) area : Supplying, fitting and fixing wall paneling, which includes providing and fixing of G.I. frame with GI perimeter channels of size 0.5 mm thick having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the wall, screw/fastener fixed to brick wall/ partition with help of nylon sleeves , at 610 mm centers. The suspended GI intermediate channels of size 45 mm, 0.9mm thk with two flanges of 15 mm each from the soffit at 1000 mm centers with ceiling angle of width 25mm x 10mm x 0.5mm thick fixed to soffit with GI cleat and steel expansion fasteners. section of 0.5 mm thk having web of 51.5 mm and two flanges of 26 mm each with lips of 10.5mm are then fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel will be placed in opposite direction with an interval of approx. 600mm centre to centre in one direction, all the framing materials of made of good quality makes. Acoustical backing by Poly fiber wool of thickness 50mm having density of 20 Kgs/M3 tie up by Galvanized wire & wire mesh to avoid sagging. Provide magnesium bonded wood wool board with primer finish of size 1200 x 600 x 15 mm having NRC minimum up to 0.75, density 400 Kg/m³, weight 4 Kg/m², termite attack nil, fire class 1 &P of good quality makes. Finally on top of this woodwool board provide Glass fibre tiles having size of 595x 595 or 595x 1195 (or size as per decision of Engineer in Charge) of 25 mm thick having density of 100 kg/m³, weight 2.5 kg/m² (min.), Fire class 1&P, Termite attack nil, NRC minimum upto 0.9, covered by the fabric for proper acoustic treatment. Design of wall to be made for proper sound reproduction. Rate includes all labour, materials, jointing compound, transporation, tools & plants, scafolding, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 10 | ACOUSTICAL WORK STAGE SIDE WALL :- Supplying, providing and fixing wall paneling, which includes providing and fixing of G.I. frame, with GI perimeter channels of size 0.5 mm thick having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the wall, fastener/ screw fixed to brick wall/ partition with help of nylon sleeves, at 610 mm centers. The suspended GI intermediate channels of size 45 mm, 0.9mm thick with two flanges of 15 mm each from the soffit at 1000 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleat and steel expansion fasteners. section of 0.5 mm thick having web of 51.5 mm and two flanges of 26 mm each with lips of 10.5mm are then fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel will be placed in opposite direction with an interval of approx. 600 mm centre to centre in one direction, all the framing materials made of good quality makes. Acoustical backing by Poly fiber wool of thickness 50mm having density of 20 Kgs/M3 tie up by Galvanized wire & wire mesh to avoid sagging. On top provide acoustical board of black colour of wood fibre core with magnesite bonded of size 1200 x 600 x 20 mm having NRC upto 0.9 (minimum), density 400 kg/ M3 Fire class 1& P. Design of wall to be made for proper sound reproduction. Rate includes all labour, materials, jointing compound, transporation, tools & plants, scaffolding, lead, lift, etc. complete. Make: The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 11 | CEILING : Supply and Installation and commissioning of acoustical board black colour of tegular edge Glass fibre core ceiling tile of size 595x595x 15 mm having density 120kgs/ m3, weight 1.8-3.0 kg/sqm which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15 grid system.The technical parameters are as follows : core - Glass fibre, Fire - class 1 & P, Acoustics - NRC 0.9 minimum, Climate (OC RH) - 40, 95, Termite resistance, Light reflectance - 85%, Green (RC %) -35, Hygiene (VoC, Clean room)- Low, Class 3 Strenght, Load capacity (Kg)-antisag including 'T' grid frame work of 24mm Grid - Hot Dipped Galvanized steel suspension System having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees. Installation: To comprise main runner spaced at 1200mm centers securely fixed to the structural socket by approved hanger at 1200mm maximum center. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm center to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles or channel, secured to walls at 450 mm maximum centers. ( Specification may vary slightly upon selection of actual product by the Engineer in Charge). Rate includes all labour, materials, transporation, tools & plants, scaffolding, lead, lift, etc. complete. Make: The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 12 | Floor Carpet: Supplying and Fixing of cut pile, Fibre composition 100% Solution dyed polyster, Yarn type Frieze, Pile Height 11 mm (± 1 mm), Pile Weight 1000 GSM (± 5% ), PP Mesh, Tufted Gauge 1/8 , with a under of foam backing of 6 mm will be installed with standard adhesives. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 13 | Stage Flooring : Supply, fitting & fixing of wooden grid/ frame structure made of M Sal wood of section 75mm x 65 mm and 50mm x 50 mm placing 600 mm center to center will be fixed on existing MS structure of stage by MS clamp & nut-bolt with washer. The wooden frame shall be anti- termite painted, on top provide & fix neoprin rubber of 3mm thickness, after that provide & fix 25mm thick 710 BWP Ply by nails & screw and on top of ply wood provide 10mm to 12mm thick teak wood plank (2nd class) and fix it by glue. Finally finished with desired grade of polish as per instruction of Engineer in Charge. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 14 | Applying interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Acrylic paints (a) One Coat |
| 15 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Engineer in Charge : Two coats) ii) Luxury Quality. |
| 16 | Supply, installation and commissioning of Acoustical door shutter (single/ double leaf) made of sal wood frame with anti-termite paint covered with 12mm ply and 4 mm thick teak veneer on both side with a thickness of shutter of approx 53-55 mm and filling with acoustical backing by Poly fiber wool of thickness 50mm having density of 20kg/m3 with polish finish, with door closer, 12\\" SS finish 'D' handle 4 Nos. for each door, tower bolt of 12\\" and all the hinge of 125 mm of SS. Door fittings shall be of good quality make. This work includes provision of suitable Door frame made of sal wood with (min) cross section 125mm x 75 mm and as directed by Engineer in Charge. Rate includes all labour, materials, moulding, beading, polishing, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 17 | Schedule \\"2\\" - STAGE CRAFT & LIGHT SOLUTION |
| 18 | Supply, fitting and fixing of 1000 W Parabolic Aluminium Reflector light fittings made of CRC sheet metal with matt black colour paint finish with 1000Watts 240V sealed wide beam lamp, barndoor arrangements and hanging clamp etc. for hanging. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 19 | Supply, fitting and fixing of 1000 W Parabolic Aluminium Reflector light fittings made of CRC sheet metal with matt black colour paint finish with 1000Watts 240V sealed narrow beam lamp, barndoor arrangements and hanging clamp etc. for hanging. Make : The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 20 | Supply, fitting and fixing of 1000 W Profile spot light fittings made of CRC sheet metal with matt black colour paint finish with 1000 W Bi-Pin halogen Lamp CP-70, & hanging clamp etc. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 21 | Supply of 24 KW 6 channel Electronic dimmer pack 19\\" rack mounted, each channel of 4 KW with DMX input via 5 pin XLR IN with MCB protection. Make : The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 22 | Supply of Light operating DMX Console of 24/48 Channel Stone 1024. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 23 | Supply, installation of 24 way patch panel made MS with powder coated paint finish, desk type/ wall mounting 15A jack/top system with M.C.B. protection etc. for the each way of the total stage light system. (custom built). |
| 24 | Supply & installation of LED par 54 LED Par 200w, 1. Light source: 54PCS 3W LEDs(R12 G12 B12 W18) 2. Lens angle: 25° (30°, 45°, 60°optional) 3. Channel mode: 3/4/6/7/ 9 DMX channel mode, 4. 0- 100% linear dimmer, 5. Function: color mix, automatic color change, built-in program and strobe effect with adjustable speed., 6. Sound controlled via built-in microphone, 7. Adjustable sound sensitivity, 8. LED Display, easy to control, 9. Control: auto, sound active, DMX512, software(connect to computer), 10. Overheating protection, 11. Voltage:100-220V, 50/ 60hz, 12. Power: 180W, 13. IP rating:IP20. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 25 | Supply & installation of Ultra Bright LED Profile 200 watt, Citizen Lamp, 3200 K color temp, 2 ch DMX Control, Supler silent cooling fan, 0-100% dimming, K9 five-mirror focusing, Power AC 100-240 Volt, 50-60Hz available 26*/36*/50*. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 26 | Supply & installation of LED cyclorama light Light source : 18PCS 12W 4IN1 LEDs Lens angle : 25°(30°, 45°, 60° optional) Channel mode : 3 / 4 / 6 / 7 / 9DMX channel mode 0-100% linear dimmer Function: color mix, automatic color change, built-in program and strobe effect with adjustable speed Sound controlled via built-in microphone Adjustable sound sensitivity LED Display, easy to control Control : auto, sound active, DMX512, software (connect to computer) Overheating protection Voltage : 100-220V, 50/60hz Power : 230W IP rating : IP20. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 27 | Supply & installation of DMX Splitter 2 in 10 out The XLR connectors are mounted directly on the board. Make : The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 28 | Supply & installation of 4 Eye Blinder 450 watt, Warm White, Individual control, 6/9/12 ch dmx,color tempreture 2500 K /3200 K, dimming 0-100% linear , beam angle 38 degree, Metal housing colour black, Frequency 50-60 Hz, AC 90 V - 245 Volt. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 29 | Supply & installation of LED 150 wat COB Par with barndoor 4/6/7 /9 ch dmx, Strobe 0-20F. P.S, power compusion 200 watt, 50000 hours lamp life, 3200K light warm white, dmx in/out 3 pin XLR, AC power 90-260 Watt. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 30 | Supply & installation of 2 core screened DMX cable for stage to control room. |
| 31 | Supply & installation of DMX point box (customized). |
| 32 | Supply and laying of 3 core PVC sheted 2.5 sq.m. cu flexible wire through PVC pipe/ cable tray from light point to patch panel. |
| 33 | Supply & installation of Stage light socket box consisting of 1 nos, 15 A plug Socket with socket with top cover. |
| 34 | Supplying, fiiting & fixing colour cloth Horizontal Main curtain, double gathering with tussle and newer ball fittings. Provide Horizontal opening push bottom control, motorised system consisting of 1.0 HP 3 phase motor with suitable gear box, 2 nos. air break contractors for operation close and open, with other curtain mechanism including all necessary, pullis, bearing housing, MS shaft, steel rope 3mm, etc. complete including manual operating mechanism. Size of curtain as per requirement of stage opening including front frills with tussle complete in all respect as per direction and approval of the Engineer in Charge. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 35 | Rear curtain : Supplying,fiiting & fixing double gathering Black cotton cloth in Rear curtain with Horizontal opening. Provide Horizontal opening push bottom control, motorised system consisting of 1.0 HP 3 phase motor with suitable gear box, 2 nos. air break contractors for operation close and open, with other curtain mechanism including all necessary, pullis, bearing housing, MS shaft, steel rope (3 to 4 mm dia.), etc. complete including manual operating mechanism. Size of curtain as per requirement of stage opening in all respect as per direction and approval of the Engineerin Charge. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 36 | Supplying,fitting & fixing of Light Bar with motorized mechanism consisting of 1.5 HP 3 phase motor with gear box limit switches and push bottom control etc.including vertical moving arrangement 1 way,2 way,3 way,4 way pulleys properly fixed from grid structures with help of 6 mm dia. Steel wire rope complete in all respect for light bar with dual GI pipe of medium gauge with dia of 48 mm and 42 mm with cable tray complete in all respect as per direction of Engineer - in -charge. Size approx. 7.00M. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 37 | FREE BAR : Supplying, fitting & fixing of FRILL & Free Bar with motorized mechanism consisting of 1.5 HP 3 phase motor with gear box limit switches and push bottom control etc. including vertical moving arrangement 1 way, 2 way, 3 way, 4 way pulleys properly fixed from grid structures with help of 6 mm dia. Steel wire rope complete in all respect for free bar with GI pipe of medium gauge with dia of 48 mm complete in all respect as per direction of Engineer in Charge. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 38 | FRILL : Supplying,fittting & fixing Frill for masking with thick black double gathering cotton cloth complete in all respect as per direction and approval of Engineer in Charge. Size approx. 9.0M x 1.20M. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 39 | CYCLORAMA : Supplying, fitting and fixing approved quality plastic screen, with motorised mechanism. Size of cyclorama as per requirement of stage and approval of Engineer in Charge. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 40 | Proscenium and Stage facia : Supplying, fitting, fixing proscenium structure at right and left side and top and bottom of stage opening area. The Proscenium structure is made of 50 x 25mm MS hollow square tube as all side members and 25 x 25 MS hollow square tube as horizontal and vertical member @ 900mm C/C welded with square tube and finally supported with grid and primer & black synthetic enamel paint finish, on top covered with 12mm BWP Ply & 4mm teak veener complete in all respect as per direction of Engineer in Charge. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 41 | Providing and fixing of stage wings of double gathering thick black cotton cloth with sincronisation facility and pivot mechanism covering for side movement. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 42 | Supply, installation & fixing of MS constructed porch 1000 mm width on both side of stage by providing of MS angle 50 x 50 x 6mm and 40 x 40 x 6mm with railing by providing of 35 mm dia black MS Pipe 2 Nos. on both side with MS constructed ladder. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 43 | Supply, installation & fixing of 19 mm thick BWP Ply on MS porch etc. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 44 | Ladder : Supply & fixing of MS constructed Ladder made of 35 mm dia MS pipe minimum length 1000 mm for hanging the light between the wings and follow light with provision for housing of 2 Nos. light fittings with height and angular movement. Rate includes all labour, materials, transporation, tools & plants, lead, lift, etc. complete. |
| 45 | Schedule: - \\"3\\" AUDIO VIDEO SYSTEM |
| 46 | Supply of 15\\" High Performance Constant Curvature Line Array type Near Field speaker with Frequency Response (-3 dB)-65 Hz - 21 kHz,Frequency Range (-10 dB)-55 Hz - 21 kHz, Coverage Pattern-100° x 40°, Max Spl-135 dB,Rated Power-Passive: 800W Continuous, 3200W Peak,Bi-amp LF: 600W Continuous, 2400W Peak, Bi-amp HF: 200W Continuous, 800W Peak. LF Driver- 15\\" ADR Alpha Range Drivers, 4\\" VC - Ferrite,HF Driver-1.5\\" exit compression driver, 3\\" VC, Crossover Frequency-1.1 kHz or Bi-amplified,Nominal Impedance-Passive: 8 ohms, Bi-amp LF: 8 ohms, Bi-amp .HF: 8 ohms,Sensitivity-98 dB. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 47 | Supply & installation of 15\\" High Performance Constant Curvature Line Array type Long Throw speaker with Frequency Response (-3 dB)-65 Hz - 21 kHz,Frequency Range (-10 dB)-55 Hz - 21 kHz,Coverage Pattern-100° x 20°, Max Spl-135 dB, Rated Power-Passive: 800W Continuous, 3200W Peak,Bi-amp LF: 600W Continuous, 2400W Peak, Bi-amp HF: 200W Continuous, 800W Peak. LF Driver- 15\\" ADR Alpha Range Drivers, 4\\" VC - Ferrite,HF Driver-1.5\\" exit compression driver, 3\\" VC, Crossover Frequency-1.1 kHz or Bi-amplified, Nominal Impedance-Passive: 8 ohms, Bi-amp LF: 8 ohms, Bi-amp HF: 8 ohms, Sensitivity-98 dB. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 48 | Supply & installation of Array frame for mounting of 2Nos. of Speaker in each side including special type hanging arrangement with Chain Pully mechanism. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 49 | Supply & installation of All Weather 10\\" Co-axial Loudspeaker, Frequency Response (-3 dB) 80 Hz -20 kHz, Frequency Range (-10 dB) 55 Hz - 20 kHz, Rated Power 400W Continuous, 1600W Peak, Maximum SPL 128 dB, Sensitivity 96 dB, Nominal Impedance 8 Ohms or 100/70 V, Coverage Pattern 90° x 90°, LF Driver Hyper Resistant 10\\"\\" Aquarepel Co-axial Driver, 2.5\\"\\" VC - Ferrite, HF Driver 2\\"\\" exit compression driver, 2\\"\\" VC, Transformer Taps 100W, 50W, 25W, 10W - 100 / 70 V. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 50 | Supply & installation of 18\\" Subwoofer for an Extended Low Frequency Response, Frequency Response (-3 dB) 34 Hz - 140 Hz, Frequency Range (-10 dB) 28 Hz - 140 Hz, Rated Power 1000W Continuous, 4000W Peak, Maximum SPL 137 dB, Nominal Impedance 8 Ohms, Coverage Pattern Omni-directional, LF Driver 18\\" Ultra Low Excursion ADR Drivers, 4\\" VC - Ferrite, Sensitivity 98 dB. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 51 | Supply & installation of Active Stage Monitor System of 15 inch Powered Speaker, Frequency Response (-3 dB) 57 Hz - 20 kHz , Frequency Range (-10 dB)45 Hz - 21 kHz, Amplifier Power 850W Continuous, 1700W Peak, Maximum SPL 128 dB, Coverage Pattern, 100° x 60°, Controls Individual & Master Gain Knobs, Power Switch, LF Driver 15\\"\\" LF Driver, 2.5\\"\\" VC - Ferrite, HF Driver 1.4\\"\\" Titanium Compression Driver - 1\\"\\" VC, Connectors 2 x Balanced XLR Inputs 1 x Balanced XLR Link Output Power Input, AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz . (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 52 | Supply & installation of BFC CONTROL Input-2,input Connectors- female XLR ad ¼\\" TRS, Input Type - electronically bal/unbal RF filtered, Input impedance- Bal 40k ohm, unbal 20k ohm, Max Input-1+20 dBu, CMRR- > 40 dB,typically > 55 dB@ 1kHz , Output connectors- male XLR & ¼\\" TRS,Sample rate- 48kHz, Frequency Response-20 Hz-20kHz,+/- 0.5 Db. Power Input- 220V-50Hz, Signal to Noise ratio- > 71 Db, Amount of Frequency- 5Hz+-10%. Output impedance-200hms. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 53 | Supply & installation of 2 - Channel High Performance Amplifier Systems for Install Applications, Power at 4 Ohms (Stereo Mode, All channels driven) 1650W, Power at 8 Ohms (Stereo Mode, All channels driven) 900W, Bridged Power at 8 Ohms3000W, Bridged Power at 4 Ohms 4000W, Dampning Factor > 400 at 8ohms, Signal to Noise Ratio (1 kHz, 8 Ohms)- 105 dB, THD < 0.02% THD / 4ohms and 8 ohms, Controls Sensitivity Selection - High Pass Cut Off - Stereo, Bridge, Parallel Switch\\"\\". (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 54 | Supply & installation of 2 Channel, Audio Power Amplifier for Touring, No. of Channels 2, Power at 4 Ohms (Stereo Mode, All channels driven) 600W, Power at 8 Ohms (Stereo Mode, All channels driven) 300W, Bridged Power at 8 Ohms, 600W,Bridged Power at 4 Ohms 1200W, Dampning Factor > 300 at 8ohms, Signal to Noise Ratio (1 kHz, 8 Ohms) - 100 dB, THD < 0.02% THD / 4ohms and 8 ohms, Controls Sensitivity Selection - High Pass Cut Off - Stereo, Bridge, Parallel Switch\\"\\". (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 55 | Supply & installation of 6\\" Two way installation Speaker with , Frequency Range(-10dB) 55 Hz - 20 kHz, Frequency Response(-3dB) 68 Hz - 20 kHz, Max Spl-113dB, Rated Power-150WAES, 600W Peak, H Dispersion-110°(-6dB), V Dispersion-85°(-6dB), Cross over- 2.2 kHz passive. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 56 | Supply & installation of a hybrid mixer matching professional analog mixing engine with superior digital functions like Mixing channels:24 Line Inputs (16 mono and 4 stereo) ,GROUP: 4 GROUP Buses + ST Bus AUX : 6 AUX Sends + 2 FX Sends ,MATRIX: 1 Matrix out,On-board processor : FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) , sI/OMicinputs MIC: 16 (INPUTS HPF: 100Hz 12dB/oct), Phantom power: 48V phantom power per channel, Line inputs : LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo ,Digital I/O:USB Device, iPod / iPhone. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 57 | Supply & installation of High Precision Management System : 4-inputs, 8- ouputs with advanced correction filters & dynamic PEQ for Feedback Correction. Audio Input 4xBalanced XLR, Audio Output 8x Balanced XLR, Minimum Load 150 Ohms, THD+N 0.0001% at 1kHz, Sound to Noise Ratio >110dB, AD & DA Converters 24bit- 96kHz, Parametric EQ 11 filters per input selected as Bell or Shelving, Centre Frequency Selectable with a 1/24th of octave resolution step from 20Hz upto 20kHz, Crossover Section HPF/LPF Butterworth 6/12/18/24 dB per octave. (Higher specification are also allowed). The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 58 | Supply & installation of Projector: Site of Bright WUXGA laser projector-7000 or better lumens, 30000 hours maintenance free laser light source at full brightness, display technology DLP Resolution WUXGA(1920X 1200), DUST RESISTANCE IP6X certified optical engine for 24/7 operational. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 59 | Supply & installation of HDMI Cable and connectors with 20 mtr length. |
| 60 | Supply and installation of 19\\", 32 U Steel Rack in 600X500mm Section with fan and 6 no sockets and accessories. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 61 | Supply & installation of professional Cardiod moving coil dynamic microphone for Vocal of frequency 50 Hz to 15 kHz . The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 62 | Supply & installation of professional Cardiod moving coil dynamic microphone for Instrument of 40 Hz to 15 kHz . The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 63 | Supply & installation of professional Goose neck type microphone 18\\" shaft with base and switch and indicator. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 64 | Supply & installation of Cordless handheld type microphone with dual antena receiver unit frequency 50 Hz to 15 kHz . The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 65 | Supply & installation of Chromium plated microphone stand table type. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 66 | Supply & installation of Chromium plated microphone stand floor type. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 67 | Supply and installation of 2.5 square mm, 2 core, speaker cable. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 68 | Supply and installation of 2 Core Screened Cu conductor PVC insulated shielded microphone cable same as DMX signal cable. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 69 | Supply & delivery of Snake Cable:- Snake 16 Core with necessary connectors. The makes shall be of good quality and shall be approved by the Engineer-In-Charge before execution. |
| 70 | Podium made of wood with polish finish with provision of power point HDMI port , microphone socket point etc. |
| 71 | Schedule: - \\"3\\" ELECTRIFICATION WORK : All electrical items makes shall be of good quality and shall be approved by Engineer-In-Charge before procurement- |
| 72 | Supply, installation of Ceiling mounted recessed type fancy LED Spot fittings of 4.5 - 5.5 watts dimable type |
| 73 | Supply, installation of LED glow sign EXIT light. |
| 74 | Supply, installation of Foot / chair LED light fittings |
| 75 | Supply, installation of Ceiling mounted round type LED light of 15 watts for Conference Hall. |
| 76 | Supply, installation of LED ribbon type light . |
| 77 | Supply , installation of ceiling mounted surface type 15 watts LED light fittings. |
| 78 | Supply, installation of wall mounted type 15\\" dia Fan. |
| 79 | Supply , installation,Testing,commissioning of distribution panel/board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gusseted, dust and vermin proof, top & bottom terminals and properly painted with anti corrosive primer and paints,with 4 Nos. of copper busbar of suitable rating as per standard comprising the following: a) Incoming power at 63 A TPN MCCB b) Outgoing feeders of 16 A - 12 Nos. (SPN) Nos.MCB c) Individual switch for each circuit. d) 3 phase indicator lamp. e) Ammeter & Voltmeter panel for 3 phase.As per relevant IS/BIS code. |
| 80 | Supply, installation and commissioning of 40 A TPN MCB with enclosure. |
| 81 | Supply, installation and commissioning of 63 A TPN MCB with enclosure. |
| 82 | Supply & installation of LED Step light |
| 83 | Supply of 1.1 KV LT UG cable having Al conductor XLPE insulated and FRLSH PVC outer sheathed round Armoured inner extruded PVC sheath confirming to IS 7098 Pt - 1 as per Latest amendment : 3.5 core 70 Sq.mm |
| 84 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 85 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar,common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.): 12 way (4 + 36), Double door |
| 86 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 87 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 88 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required : 2 x 1.5 sq. mm |
| 89 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required : 2 x 2.5 sq. mm |
| 90 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required : 2 x 4 sq. mm |
| 91 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required : 2 x 6 sq. mm |
| 92 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.: 20 mm |
| 93 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required: Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 94 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.:3½ X 70 sq. mm (38mm) |
| 95 | LED Batten light (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation, Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm): 36 watt |
| 96 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A Please Enable Macros to View BoQ information |
