|
| 1 | Excavation in earth work and disposal of all excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressedcomplete in all respect and to the entire satisfaction of the Engineer-in-charge. (50% Pick+50% Jumper work). |
| 2 | Providing and laying cement concrete 1:6:12 (1cement : 6 sand: 12 graded stone agg.40mm nominal size) and curing complete excluding cost of centring and shuttering within all leads and lifts as per direction of Engineer-in-charge In Foundation and plinth. |
| 3 | Demolition of Brick work below ground level 1.5 metres depth including stacking of serviceable material and disposal of unserviceable material within 20 metres lead. In cement mortar. |
| 4 | Brick work using common burnt clay building bricks in Foundation and Plinth in cement mortar 1:6 (1 cement : 6 Sand) Second class bricks complete in all respect as per direction by Engineer in Charge |
| 5 | 15mm cement plaster in single coat on fair side on brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounding angles, chambers and or rounded angles not exceeding 80mm in girth and finished even and smooth:-Cement mortor 1:6. |
| 6 | Providing and laying cement concrete 1:5:10(1cement : 5 sand: 10 graded stone agg. 40mm nominal size) with 15% plum concrete and curing complete excluding cost of form work in retaining wall/ breast wall, the size of plums shall usually be 150mm to 300mm.as per HPPWD specifications within all leads and as per the direction of the Engineer-in-charge. |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting, strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 3 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in complete in all respect i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 8 | Vertical surfaces such as circular walls (any thickness), partitions and the like including attached pillasters,buttresses, plinth and string courses and the like. |
| 9 | Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws etc. complete.40mm thick Second class Deodar wood :- |
| 10 | Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing and polishing complete (sub-base concrete floor to be paid for separately). 60mm thick block. |
| 11 | Providing and fixing of 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron 'J' or 'L' hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer -in-charge. |
| 12 | Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron 'J' or 'L' hooks bolts and nuts 6 mm dia prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer -in-charge. |
| 13 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with readymixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter i/c all leads and lifts and as per direction of Engineer-in-charge. |
| 14 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete. |
| 15 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and fnal finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete. |
| 16 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint i/c all leads and lifts complete in all respect. |
| 17 | In beams, Joists, channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. |
| 18 | Supply and fixing of galvanised steel bar- bed wire (IS:278-1962 Type-1) weighting 9.38Kg.per 100mtr.(minimum) straining and fixing to any type of standard rails,straining bolts including securing with and provision of galvanised mild steel wire, steples or steel pins etc.as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid for seperately). |
| 19 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group -C Please Enable Macros to View BoQ information |
