|
| 1 | Labour Charges for dismantling and Scrabs Removing for existing False Ceiling Board and necessary items etc., complete as per standard specifications. |
| 2 | Paving pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 in Cement Mortar 1:3 (One Cement and Three crushed stone sand), with required Cement Slurry and Mortar Plasticizer, 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 3 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 4 | Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification. |
| 5 | Painting two coats with ready mixed approved paint over old steel surface including cost and conveyance all materials etc. complete |
| 6 | Painting two coats with ready mixed approved paint over New steel surface including cost and conveyance all materials etc. complete |
| 7 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 21) |
| 8 | Supply and fixing of single box type 4'40 W LED Fitting complete on the wall with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD 88) |
| 9 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with1metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") (SD 106) |
| 10 | Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/Crompton/K-Lite) suitable for 15W LED Bulb (SD 83) |
| 11 | Supply and fixing of 25W Street lights including wiring etc., complete as per standard specifications. (SD - 98) |
| 12 | Supply and fixing of 450mm (18\\") sweep (light duty) AC dxhaust fan complete without provision of hole in the wall including all necessary items etc., complete as per standard specifications. |
| 13 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. |
| 14 | 50 Litre Capacity |
| 15 | Supplying & Delivery of following the Kitchen Materials including cost and conveyance all materials etc. complete |
| 16 | Grinder 10 LTR |
| 17 | SS Folding Table 6*1.75 FF |
| 18 | Chair |
| 19 | SS Canteen stove 24*24 |
| 20 | SS Canteen stove 24*24 (2 Bunner) |
| 21 | Aluminium Vattam 18' (3.400 KG) |
| 22 | Aluminium Vattam 20' (5 KG) |
| 23 | Aluminium Vattam 30' (17.100 KG) |
| 24 | Aluminium Kudai |
| 25 | Aruvaal |
| 26 | Weight Machine 50KG |
| 27 | Plastic Kudam |
| 28 | SS Hot Box 15LTR |
| 29 | Plastic Barrel (200LTR) |
| 30 | SS Holes Karandi NO.1 |
| 31 | Chinese Ladle NO.6 |
| 32 | SS Juice Karandi |
| 33 | SS Bucket NO.8 |
| 34 | SS Bucket NO.9 |
| 35 | SS Water JUG NO.3 |
| 36 | M.S Kadai 18' (6.250) |
| 37 | MS Aruvamanai |
| 38 | Mixie (Preethi XPRO) |
| 39 | SS Stool |
| 40 | SS Basin NO.20 |
| 41 | AL.Sauce Pan NO.14 |
| 42 | Cooker (Premier 22LTR) |
| 43 | Cooker (Premier 30LTR) |
| 44 | AL.Bucket |
| 45 | Squarl Idly Box 150KULI |
| 46 | Squarl Idly Box 250KULI |
| 47 | SS Drum Small |
| 48 | SS Drum Big |
| 49 | SS Kuli Karandi NO.1 |
| 50 | SS Kuli Karandi NO.6 |
| 51 | SS Plate |
| 52 | SS Container |
| 53 | SS Tumbler Provision for Man Hole raising and New FRC Frame Cover Fixing Work .The Rate inclusive of all charges etc, complete as per standard specifications. Please Enable Macros to View BoQ information |
