|
| 1 | Dismantling the damaged Tiles including all cost and convenyance at materials to site and all labours charges etc., complete. |
| 2 | Dismantling the damaged PCC 1:4:8 including all cost and convenyance at materials to site and all labours charges etc., complete. |
| 3 | Earthwork excavating and depositing on bank with an initial lead of 10m & initial liftm of 2m, in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size bouiders and hard gravelly soil asper standard specification 20 B including refilling charges. |
| 4 | Plain cement concrete 1:4:8 mix using 40 mm ISS size HBG metal from approved Quality including all cost of materials of site all Labour charges and conveyance etc., complete as per standard specification. |
| 5 | Brick work in the cement mortar 1:5 ( one cement Five sand) mix using well burnt country bricks of size 8 ¾” x 4 ¼” x2¾” from approved quarry including all cost and conveyance of materials to site and all labours charges etc., complete as per standard specification. |
| 6 | Plastering with c.m. 1:5 (one cement and five sand) 12mm thick including all cost of materials and labour charges etc. complete. |
| 7 | Plastering with c.m. 1:4 (one cement and four sand) 20mm thick including all cost of materials and labour charges etc. complete. |
| 8 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 9 | Dadooring the walls with glazed square tiles of 150mm x 150mm x 6mm of the following colour set in cement mortar 1:2 ( one cement two sand) with white cement @ 0.4Kg/m2 neatly in all floors as directed etc., complete |
| 10 | Supplying and fixing of MS iron door with iron angles including all cost and conveyance all materials to the site and all labour charges etc. complete |
| 11 | Painting two coats with approved interior and exterior emulsion paint over cement plastered wall surfaces, ceiling and other new surfaces including Cleaning preparing the surface and curing etc., complete as per standard specification |
| 12 | Painting two coats with best quality enamel paint over Old iron work including all cost of material and labour charges etc, complete |
| 13 | Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe on wall and ceiling with accessories and TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 19 SWG TC wire for Concealed PVC light point /Fan point (SD 1) |
| 14 | Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe Concealed on wall and ceiling with accessories and in flush with wall with 150mm X 100mm x113mm TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 14 SWG TC wire for Concealed PVC Plug Point (SD 38) |
| 15 | Supplying and fixing of single box type 4'40 w flu fitting complete with Electronic Ballast with TW round block on wall or ceiling with flutube PVC unsheathed Copper leads from terminal to the fitting (SD 88) |
| 16 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") (SD 106) |
| 17 | Supplying and following pipes and specials |
| 18 | 20mm G.I Gate valve |
| 19 | 20mm G.I Pipe B.Class |
| 20 | 20mm G.I Coupling |
| 21 | 20mm G.I Ellbow |
| 22 | 20mm G.I Union |
| 23 | 20mm G.I Hex Nipple |
| 24 | 15mm SD tap |
| 25 | Solventcement |
| 26 | 110mm PVC Pipe |
| 27 | 110mm PVC TEE |
| 28 | 110mm PVC bend |
| 29 | 110mm PVC Elbow |
| 30 | 1000 Litre PVC Tank |
| 31 | Labour charges for Laying of PVC pipes and specials from OHT to Toilet block etc., complete |
| 32 | Supply and installation of Acoustical False Ceiling of Higher absorption nubby finish tiles, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick T15 metal grid system. T15 metal grid system of 600 x 600mm module includes WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleevesand suitable fasteners at 300mm centers. Then suspend the MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The Higher absorption Nubby finish tiles square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication. |
| 33 | Supply and Fixing of Solid panel PVC door with frame including all cost and conveyance of materials and all labour charges etc., complete |
| 34 | Supply and Delivery of Following Materials |
| 35 | Western Freezer 350L |
| 36 | Preethi Mixi |
| 37 | Tilting Grinder 15L |
| 38 | Hot Box 30L |
| 39 | RO Water Purifier |
| 40 | Weight Machine 50Kg |
| 41 | Double Burner 14x40x10 inch SS Gas Bhatti with Deluxe Bottom Burner for Commercial Use |
| 42 | Andha with cover |
| 43 | iddly koparai Provision for Man Hole raising and New FRC Frame Cover Fixing Work .The Rate inclusive of all charges etc, complete as per standard specifications. Please Enable Macros to View BoQ information |
