|
| 1 | fo|qr forj.k [k.M eqjknuxj ds vUrxZr 33@11 ds0oh0 fo|qr midsUnzksa] 11 o 33 ds0oh0 oh0lh0ch0] fLop;kMZ] fLopfx;j rFkk forj.k ifjorZdksa ls lacaf/kr lqn` |
| 2 | SAFE CARRIAGE OF S.T./PCC POLE FROM STORE CENTER TO SITE STORE WITH LOADING & UNLOADING AT BOTH ENDS RESPECTIVELY DISTANCE WITHIN- 0 TO 50 KMS. |
| 3 | 11 KV VCB 200/100/5 |
| 4 | 33 KV CT 400/200/1.1A |
| 5 | 33 KV PT O/D 33 KV/110 V. |
| 6 | 33 KV FUSE SET |
| 7 | 33 KV ISOLATOR 800 |
| 8 | CONTROL CABLE 4X2.5 SQ. MM. |
| 9 | BATTERY CHARGER 24 VOLT. |
| 10 | BATTERY SET 12 NO.*24 VOLT 200 AH |
| 11 | LOADING, SAFE CARRIAGE & UNLOADING OF HEAVY STOCK MATERIAL V TYPE, DISC INSULATOR, PIN INSULATOR ETC. FROM STORE CENTER TO SITE STORE WITH PROPER STACKING OF MATERIAL, DISTANCE WITHIN-50 KMS. |
| 12 | CUTTING /DRILLING /WELDING OF MS ANGLE & CHANNEL. |
| 13 | WORK OF PLINTH REPAIRING (250/400 KVA ) |
| 14 | WORK OF DT NEW FENCING (250/400 KVA ) |
| 15 | WORK OF PIPE EARTHING (INC. INSTALLATION) |
| 16 | WORK OF PLINTH REPAIR (FOR POWER TF) |
| 17 | CONSTRUCTION OF PLINTH FOR VCB. |
| 18 | MAKING JUMPERS ON SECTION POINTS, BY FIXING OF PROPER SIZES, SUITABLE FOR ACSR CONDUCTOR. SECTIONAL DOUBLE/FOUR POLE. |
| 19 | MAKING/FILLING OF 11 KV CABLE JOINTING KIT 3*70 SQ MM. XLPE CABLE. |
| 20 | THE FOLLWING MATERIAL WILL BE FIXED BY THE CONTRACTOR. |
| 21 | 11 KV VCB 200/100/5 |
| 22 | 33 KV CT 400/200/1.1A |
| 23 | 33 KV PT O/D 33 KV/110 V. |
| 24 | 33 KV FUSE SET |
| 25 | 33 KV ISOLATOR 800 |
| 26 | CONTROL CABLE 4X2.5 SQ. MM. |
| 27 | BATTERY CHARGER 24 VOLT. |
| 28 | BATTERY SET 12 NO.*24 VOLT 200 AH |
| 29 | FIXING OF CHEMICAL EARTHING |
| 30 | FIXING OF WTI (POWER TF) PROVIDING ONLY |
| 31 | FIXING OF OTI (POWER TF) PROVIDING ONLY |
| 32 | FIXING OF AUXULARY ELECTRONIC RELAY. |
| 33 | FIXING OF CLAMP WITH NUT & BOLT |
| 34 | THE FOLLWING MATERIAL WILL BE PROVIDED BY THE CONTRACTOR. |
| 35 | PROVIDING CHEMICLE EARTHING ELECTROD ROD. |
| 36 | PROVIDING OF WTI (POWER TF) PROVIDING ONLY |
| 37 | PROVIDING OF OTI (POWER TF) PROVIDING ONLY |
| 38 | PROVIDING OF AUXULARY ELECTRONIC RELAY. |
| 39 | CONTROL CABLE 4X2.5MM SQ |
| 40 | PROVIDING, FABRICATING CARRYING & FIXING OF TAILLESS FUSE UNIT HOOK TYPE ARRANGEMENT, CIRCUIT HAVING 3 PHASE + NEUTRAL ARRANGEMENT IN BOX / FRAME MADE OF 65CMX65CMX6MM FRAME MS ANGLE WITH HEAVY DUTY ALUMINIUM LUGS SUITABLE FOR 500 AMP LOAD ON AT LEAST 2 FT HEIGHT FROM GROUND ON PLINTH FOR SAFE INSTALLATION OR FIXING OF TAILNESS UNIT AT MS ANGLE FRAME ON PLINTH HORIZONTIALLY/VERTICALLY AS PER SITE REQUIREMENT ON AVAILABLE PLINTH AT SAFE HEIGHT AS PER SITE CONDITIONS FOR ELECTRICAL SAFETY WITH MAKING THE CONNECTION AT(160 KVA-250 KVA) T/F AND LINE SIDE COMPLETE. |
| 41 | PROVIDING, FABRICATING CARRYING & FIXING OF TAILLESS FUSE UNIT HOOK TYPE ARRANGEMENT , CIRCUIT HAVING 3 PHASE + NEUTRAL ARRANGEMENT IN BOX / FRAME MADE OF 65CMX65CMX6MM FRAME MS ANGLE WITH HEAVY DUTY ALUMINIUM LUGS SUITABLE FOR 500 AMP LOAD ON AT LEAST 2 FT HEIGHT FROM GROUND ON PLINTH FOR SAFE INSTALLATION OR FIXING OF TAILNESS UNIT AT MS ANGLE FRAME ON PLINTH HORIZONTIALLY/VERTICALLY AS PER SITE REQUIREMENT ON AVAILABLE PLINTH AT SAFE HEIGHT AS PER SITE CONDITIONS FOR ELECTRICAL SAFETY WITH MAKING THE CONNECTION AT(400 KVA) T/F AND LINE SIDE COMPLETE. |
| 42 | PROVIDING CLAMP WITH NUT & BOLT |
| 43 | DISMANTLING & REMOVAL OF OLD & USED MATERIALS . |
| 44 | VCB SCRAP |
| 45 | OLD & DAMAGE BATTERY CHARGER WITH BATTERY SET |
| 46 | MS IRON SCRAP |
| 47 | CARTAGE OF OLD & USED RECEIVED BACK MATERIAL FROM SITE TO STORE CENTRE/ J.E. STORE. |
| 48 | 33 KV VCB SCRAP |
| 49 | OLD & DAMAGE BATTERY CHARGER WITH BATTERY SET |
| 50 | MS IRON SCRAP Please Enable Macros to View BoQ information |
