|
| 1 | SITC of Package UHD 2160p (4K) PTZ Camera, 4K Codec, Omnidirectional Digital Microphone and Remote Control from the same OEM. Video Standards and Resolutions It should support H.323 & SIP standards for communications. It should support interoperability and bandwidth saving using video compression H.264 AVC, H.264 High Profile, H.265 It should support 4K 30fps, 1080p 60 fps,1080p 30 fps ,720p 60 fps ,720p 30 fps. Content Standards and Resolutions It should support both wired and wireless content sharing using standard based H.239 and BFCP. It should also support audio from Laptop used for content sharing. It should transmit content to the far end location up to 4K15fps. It should support inbuilt feature for wireless content sharing from Windows, MacOS, Android, iOS Smartphones & Tables without downloading any application on the user device.It should support Content Annotation and WhiteBoarding/Blackboaring capability when connected to Touch Enabled Display/Monitor. Audio Standards and Features It should support G.711, G.728, G.729A, G.722, G.722.1, G.719 or better Automatic Gain Control and Automatic Noise Suppression It should have inbuilt technology to identify and eliminate non-human distracting noises such as keyboard typing, paper shuffling and wrapper crinkling during video calls.Video and Audio Inputs 1 x HDMI/HDCI/USB input for connecting main Full HD camera 1 x HDMI input to share 4K/Full HD content from PC/Laptop/Document camera/PTZ Camera. It should have additional USB port for connecting minimum 2 more cameras or it should support AV over IP to connect multiple cameras It should support minimum eight omnidirectional mics. The bidder needs to quote 2 omnidirectional microphone with mute/unmute soft touch button on the microphone. Each microphone should have atleast 15 feet pickup range. 1 x RCA/3.5mm stereo line-in Video and Audio Outputs 2 x HDMI output for connecting primary and secondary 4K(UHD)/Full HD displays. 1 x RCA/3.5 mm stereo line-out Other Interfaces 1 x 10/100/1000 Ethernet por 1 x USB to support system software upgrade Bluetooth 5.0 and WiFi 802.11a/b/g/n/ac (MIMO) for Wireless Content Sharing for Guests using their Smartphones and Tablets (Android and iOS) Camera The camera should support group framing and presenter tracking The camera should support minimum 12X Optical Zoom, PAN +/-170°, Tilt +/- 30° & minimum 10 camera presets. The camera should support 4K UHD resolution Video Conference Camera and Codec should be controlled using same Remote Control. Network Features H.323 and SIP bandwidth supporting up to 6 Mbps or more.Must support IPv4 and IPv6 from day one on both H.323 and SIP. Complete in all respect as desired by the Engineer in charge of work at site. |
| 2 | SITC of Matrix switcher 8 x 8 Connects any of 8 HDMI sources to any of 8 HDMI displays Supports True 4K resolutions up to 4096 x 2160 @ 60Hz (4:4:4) Multiple Control Methods – system management via front-panel pushbuttons, IR remote, RS-232 control, and Web GUI/Telnet via Ethernet connections HDMI (3D, Deep Color, 4K) and HDCP 2.2 compatible Supports HDR10+ Selects optimum EDID settings for smooth power-up, high-quality display and use of the best video resolution across different screens Supports Dolby True HD and DTS HD Master audio Power-on Detection – switches to the next powered-on source when one source is powered off Supports HDMI cable lock for secure HDMI cable connections Max. Pixel Clock:600 MHz; Max Data Rate:18 Gbps( 6 Gbps Per Lane)TrueHD, Dolby Digital Plus.Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001. |
| 3 | SITC of HDMI HDBaseT Extender 4K@100m HDBaseT Connectivity – extends an HDMI connection over a long distance Supports have optios to extends full HD signal for 150m or better. \\"Should have Interface- Transmitter- 1 X HDMI as input port & 1 X RJ 45 as unit connection. Receiver - 1 X HDMI as output port & 1 X RJ 45 as unit connection.\\" Should have LED indication to show link & power status. Should be HDCP 2.2 compatible & CEC supported. Should supports Max data rat of 10.2 GbpS & Max Pixel clock of 340 MHz. Should be aplug & play device with no software requirement. Housing - Metal Operating Temp- 0 - 40 ºC Complete with power adaptor. Should be of same make of switcher for better compatibility. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 4 | SITC of smart PDU for power management , Remote power outlet control (on / off, power cycle) by individual outlets Power-On sequencing – users can set the power-on sequence and delay time for each outlet to allow equipment to be powered on in the correct order Supported Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense, Ping, Telnet Should have browser-based user interface for easy operation. Easy setup and operation via a browser-based user interface with multi-browser support. Maximum Output Current (Outlet) - C13: 10A(Max), Maximum Output Current (Bank)- 10A Remote power control via TCP/IP and a built in 10/100 Ethernet port Two-level password security Strong security features include password protection and advanced encryption technologies – 128 bit SSL Should support schedule controlling when used with a control system. Maximum Input & Output Current:16A Max; Outlet Type: Total: 8 x IEC320 C13 Should be complete with temperature & humidity sensors. G.711, G.728, G. 729A, G.722, G.722, G.722.1, G.719 or Better automatic Gain control and automatic noise suppression. It should have inbuilt technology to identify and eliminate non- Human distraction noises such as keyboard typing paper shuffling and wrapper. PDU and controller should be from same OEM as of switcher , Extenders and processor for better integration. Complete in all respect as desirec by the Engineer in charge of work at site. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 5 | SITC of 10.1” touch panel. Should be of same OEM as the control system. Should gets power over POE and able to communicate over the same port. Should have flexibility in installation either on table using external mounting kit or wall mounting. Should have capacitive TFT display with supported resolution of 1280 x 800 with aspect ratio of 16:10. Should support contrast ratio of 600:1 or better and brighness of min 350 or better Ethernet-1 x RJ-45 Female, 10 / 100 / 1000 BaseT Power Consumption: with POE:14W Operating Temperature (0 – 30°C) Tabletop kit that is compatible with the 10.1\\" Touch Panel. Equipped with adjustable hinges, the tabletop stand allows the Touch Panel to be adjusted at different angles and heights for comfortable viewing. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 6 | SITC and programming of Control Processor with Dual LAN ports. Should be from same OEM as matrix switcher for flawless integration. Control Processor should have quadcore CPU with min 1GB of memory or better Should have LCD display shows the option for configuration and information display Should have 1 x Programmable Bi-directional RS-232/422/485 Port;1 x Bi-directional RS-232 Port;2 x Programmable IR / Uni-directional RS-232 Port; 4 x Relay Channel;2 x Programmable Digital Input / Output Channel;2 x RJ-45 Female, 10/100/1000Base-T;1 x USB Type A;1 x On/Off Switch Supports native KNX IP for building management systemsShould have inbuilt IR learner for IR devices. Should have 2 x RJ-45 Female, 10/100/1000Base-TSupports Telnet CLI command mode for third-party devices control. Should support web viewer or web based console for 3rd party devices. Should have LED indication of connection and hardware status. Should have minimum 2 Free License for Android, IOS & windows device. Operating Temperature 0 – 40°C Housing - Metal. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 7 | Supply, installation, testing & Commissioning of 24 U Equipment Rack, Locakable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 8 | SITC of Cable Manager, table mount modular multi-Connection Solution with retractable Lid with cable pass through for 1 HDMI, 1 USB-C, 2 LAN, 2 Universal AC Power Outlet & 2 USB charging outlets, Certification: CE, etc. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 9 | SITC OF WALL PLATE WITH 3X HDMI, 2X RJ 45 , 4X XLR Ports. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 10 | SITC Of 1.5 inch (3.75 cm) or more full-range speaker units number of driverunits 12 or more with neodymium magnets. Wide horizontal dispersion for uniform SPL over a wide area The vertical coverage can be selected from two modes, Normal and Wide Slim design complements any interior décor, top quality materials throughout to deliver natural response right down to 77 Hz* , for full-range performance that is ideal for speech as well as music reproduction. 160watt PGM Power 91 dB SPL (90 dB SPL with port cover) *1 *4. 16 OHM speaker . OEM should have service senter in Tricity. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 11 | SITC Of 2x 500W at 8Ω ; 2x 800W at 4Ω ; Newly developed Class-D amplifier engine with a custom LSI ; Flexible onboard PEQ, crossover, filters, delay, and limiter functions Class D, balanced output circuit (BTL) 1 kHz, 10 W , 1 kHz, half power 1 W, 8Ω, 20 Hz to 20 kHz Half power, 8Ω, 1 kHz, vol. max., input 150Ω shunt < =-60Db A-weighted, 8Ω, gain setting = +14 dBu 100DB +24DBU Input summing D-CONTOUR: FOH/MAIN, MONITOR, OFF Delay: 0–74msec HPF/LPF: cutoff frequency 20Hz–20kHz with polarity control Speaker processor: 6 band PEQ + limiter + delay Should be of same brand as of speaker and should have service center in tricity. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 12 | SITC of wireless handheld mic set that includes the handheld transmitter, stationary receiver and everything to use or install with rechargeable accupacks with up to 15 hrs of operating time, Automatic frequency and interference management, Excellent speech intelligibility, Full, natural sound with low ambient noise, Automatic frequency and interference management, Lockable 3.5 mm jack socket, Secure 256 bit AES encryption. Complete in all respect as desirec by the Engineer in charge of work at site. |
| 13 | Supply, installation, testing & Commissioning of wireless Lapel microphone, with (UHF) Diversity receiver, 12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 30/50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz, Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter, Receiver dynamic range 106dB (A-weighted). Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 14 | SITC OF Conference control Unit provides 24-bit/48 kHz digital signal processing (with 12-band feedback suppressor), control upto 100 unit and having option of cascading of upto 3 control unit , automated gain control (AGC), mic gain and mic EQ for each connected discussion unit. It can be operated locally, through Web Remote interface (no software required), or third-party IP control systems. Offers three selectable conference modes (Free Talk, Request to Talk, and Full Remote) and various override settings. Can record WAV and MP3 files onto a connected USB mass storage device. Includes two Mic/Line inputs, two AUX inputs and two interpretation return inputs. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 15 | SITC OF DSP Digital Mixer : 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo unbalanced input; 1 stereo and 2 mono outputs; 2-channel USB audio interface for soft codec (Skype, WebEx) integration or playback from computer; Full digital processing on inputs and outputs; 8 x 3 audio routing matrix; 6-channel Smart Mix (gate or gain sharing); Onboard acoustic echo canceler (AEC) processing; Front panel direct operation and Web Remote functionality; IP control for third-party CCS administration; Up to 6 mixers can be linked using Cat5e cable. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 16 | SITC of Flush Mount Chairman Microphone with Push to Talk & Mute Touch Button with custom external button for priority/ clear facilityElement: Fixed-charge back plate, permanently polarized condenser Pick up Pattern: Cardioid Frequency Response :70Hz-15,000 Hz Open Circuit Sensitivity:-37 dB Impedance:60 ohms Maximum Input Sound Level:134 dB SPL Signal-to-Noise Ratio:70 dB, 1 kHz at 1 Pa RFI Shielding & Protected by a rugged all-metal case with a two-layer steel mesh grille Capacitance Switch integrated with Microphone Unit and trigger the conference integration device to permit the talk & Mute Programming Functionality with addition of the change in an integral Red/Green LED ring. XLR Connector Pin: 5 No's Included accessories: Rubber isolator Complete with External Custom button for priority/ clear facility standard accessories as required.Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 17 | polarized condenser Pick up Pattern: Cardioid Frequency Response :70Hz-15,000 Hz Open Circuit Sensitivity:-37 dB Impedance:60 ohms Maximum Input Sound Level:134 dB SPL Signal-to-Noise Ratio:70 dB, 1 kHz at 1 Pa RFI Shielding & Protected by a rugged all-metal case with a two-layer steel mesh grille Capacitance Switch integrated with Microphone Unit and trigger the conference integration device to permit the talk & Mute Programming Functionality with addition of the change in an integral Red/Green LED ring. XLR Connector Pin: 5 No's Included accessories: Rubber isolator Complete with standard accessories as required.Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 18 | SITC of Under Table Digital Audio Conference Integration Unit. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. System Type: Under Table / Flush Mount Digital Audio Conference Integration UnitAvailable ports for digital Conferencing application:1) Microphone Input port2) Speaker Output Port3) Headphone Output Port4) Status Output Port for talk & Language LED5) Control Input Port for Vol Up & Down, Channel, Mute & Unmute6) Power Output: 5V7) Minimum 12 GPIO portsDynamic Range: 105dB-A Frequency Response: 20Hz-20kHz Audio Sampling: 24bit / 48kHz S/N Ratio: 86dB-A Phantom Power: DC +48V 2 x RJ45 Link Port for Integration Unit |
| 19 | SITC of Extender to enabling extended cable runs for conference System from the same OEM It shall have minimum 2x RJ45 ports Mode switch for selection of local or remote operation DC 48V power to connected devices LED indicators for power on/off Connections : Outputs: LINK power status Chain: DU port A/B\\" power supply to linked devices Operating Temperature Range: 0-40℃ Operating Humidity:25-85% Complete with standard accessories as required.Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 20 | SITC of HDBaseT-Certified Cat.6a Patch Cable – 2.00m, black. Cat.6a with up to 500MHz for 10GBase-T Ethernet; HDBaseT-certified Gold-plated precision contacts RJ45 male to RJ45 male High purity copper strands, S/FTP shielding, AWG26 Halogen-free (LSZH) PE jacket, low smoke emissions in case of fire. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 21 | HDBaseT-Certified Cat.6a Patch Cable – 15.0m, black. Cat.6a with up to 500MHz for 10GBase-T Ethernet; HDBaseT-certified Gold-plated precision contacts RJ45 male to RJ45 male High purity copper strands, S/FTP shielding, AWG26 Halogen-free (LSZH) PE jacket, low smoke emissions in case of fire. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 22 | SITC of 8 Port POE Switch SITC of 8 Port POE Switch Port Configuration: Features 8 x 10/100/1000 Mbps ports, with 4 ports supporting PoE+. PoE Performance: Delivers up to 30W per port with a total power budget of 68W. Switching Capacity: Offers a 16 Gbps switching fabric and a forwarding rate of 11.90 Mpps. Design: Metal housing with a fanless design for silent operation. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 23 | COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES:Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 24 | CAT 6 LAN cable |
| 25 | SITC of 1.5 sq mm 2 core oxygen free speaker cable Conductor Material: Stranded Annealed High-Conductivity Copper (OFC preferred).Conductor Area: 1.5 sq.mm per core.Stranding: 48 strands of 0.20mm diameter (approx. 48/0.20).No. of Cores: 2 Core or 4 Core.Insulation: PVC (Polyvinyl Chloride) or LSZH (Low Smoke Zero Halogen).Insulation Diameter: \(\approx 2.90\text{\ mm}\).Core Identification: Color-coded (e.g., Blue/White) or transparent with polarity stripe.DC Resistance (@ \(20^{\circ }\text{C}\)): \(\le 13.70\text{\ }\Omega /\text{km}\).Operating Voltage: 600V (typical for armored).Operating Temperature: \(-20^{\circ }\text{C}\) to \(+70^{\circ }\text{C}\). Specialized Tender Requirements Armored (External): Galvanized Iron (GI) wire armor (\(0.90\text{\ mm}\)), overall OD \(\approx 12.10\text{\ mm}\pm 0.20\text{\ mm}\).Indoor/General: Flexible PVC sheath, often transparent or white. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 26 | SITC of metallic RJ 45 Connectors for CAT 6 Cable. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. |
| 27 | Cables & connectors XLR , Speakon and RCA lot metallic as per site requirments. Complete in all respect with required accesories as desired by Engineer- In- Charge of work at site. Please Enable Macros to View BoQ information |
