|
| 1 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.50 mtr in depth for taking out /laying of CI/GI Pipe Lines etc., forming bottom surfaces of trenches to required level and gradient and getting out in soft/ loose soil complete all as specified and as directed by Engr-in charge. |
| 2 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, including providing heaps along the trenches with surplus soil, complete all as specified and as directed by Engr-in charge. |
| 3 | Removing Surplus Soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 4 | Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CI fitting for addition / alternation of existing system for 150 mm bore sizes complete all as specified and as directed by Engr-in charge. |
| 5 | Supply and fix cast iron flanged sluice valve of class 1.6 PN installed complete with ISI marked (IS-14846) with gun metal spindle and hand wheel 80 MM bore all as specified and directed |
| 6 | Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) Pipes 90 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately |
| 7 | Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) Pipes 63 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping, cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface, fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately |
| 8 | Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) Pipes 50 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately |
| 9 | Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropyelene random copolymer) Pipes 32 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately |
| 10 | Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) Pipes 25 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately |
| 11 | S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property )fusion welded PP-R ( Polypropylene random copolymer) gate valve brass 25 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed by Engr-in-charge. |
| 12 | M & L For making connections of PP-R distribution branch with PPR Main of outer dia of pipes 16mm to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed by Engr-in-charge. |
| 13 | DI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for Pipe upto 300mm bore complete all as specified and as directed by Engr-in charge. |
| 14 | M&L Construction Brick Masonry Valve Pit of size 750x750x900 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame all round including provision of Hinges, Handle with Locking Arrangement and 40x40 x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil including demolition of unserviceable Valve Pit, complete all as specified and as directed by Engr-in charge. |
| 15 | Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 150 mm bore (dia) for passing of pipes, complete all as specified and as directed. |
| 16 | M&L for float valve high pressure with polythene float and fly complete, screwed for iron pipe or PVC ferrule and fixed in all as specified and directed of following size:- (a) 20 mm bore |
| 17 | (b) 25 mm bore |
| 18 | Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CI fitting for addition / alternation of existing system for 80 mm bore sizes complete all as specified and as directed by Engr-in charge. |
| 19 | Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface complete all as directed by Engr-in-Charge. |
| 20 | Taking down the existing unservicable main switch /change over / cut out/ DBs , MCCB , MCB,s of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge. |
| 21 | Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge. |
| 22 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. |
| 23 | M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for :(a) One light point controlled by one, one way switch 5 Amps |
| 24 | (b) One 3 point 5 Amps socket outlets point controlled by one switch on the same board |
| 25 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board |
| 26 | All as per item No 23 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board. |
| 27 | S & F Switch piano (White) flush type single pole one way 6 Amp, 230 Volts complete all as specified. |
| 28 | S & F Socket outlet (White) 2 in 1, 5 pin, 5 Amps complete all as specified and directed. |
| 29 | S & F Switch socket combination(White) flush type multipurpose 5 pin 5 Amps two in one , 230 volts complete all as specified |
| 30 | S&F Switch socket combination (White) 2 in 1 5/6 pin, 15 Amp flush type universal. |
| 31 | S&F ceilling rose (White) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified |
| 32 | S & F ceiling fan regulator (White) step type 2 Module, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified. |
| 33 | S & F Lamp holder (White) with insulated body, with back plate suitable for batten fittings complete all as directed. |
| 34 | S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Surya. |
| 35 | S & F sheet metal enclosure MCB VTPN 8 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates , IP54 circuit identification labels With provision for 4 Pole MCCB 125A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. |
| 36 | S & F MCCB 4 Pole 415 volts 125 Amps with thermal - magnetic release with breaking capacity 25 KA and with adjustable overload setting complete all as specified. |
| 37 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system complete grouted on walls complete all as specified. |
| 38 | S & F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with locking system grouted on walls complete all as specified. |
| 39 | S & F MCB FP 415 volts suitable for fixing in MCB TPN DB of capacity 63 amps complete all as specified and directed. |
| 40 | S & F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 40 Amps complete all as specified. |
| 41 | S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed. |
| 42 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 43 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 35/36 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. |
| 44 | S&F in repairs decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provision of LED bulb 09 watts all as specified and as directed. |
| 45 | S&F in repairs Octane LED 2X2 PANEL ultra slim recess mounted edgelit LED 36/40 Watt 6500K , module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling complete all as specified and as directed. |
| 46 | M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed. |
| 47 | Supply & Laying well burnt brick , locally available best quality (sub class \\"B\\" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified. |
| 48 | Supply & Laying XLPE LT heavy duty UG Cable of size 70 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab and equivalent in Havells and Gloster |
| 49 | S & F GI Tubing light grade of size 80 mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed. |
| 50 | Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed. |
| 51 | M&L for replacement Sub main wiring 4 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. |
| 52 | M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor duly cutting chases on walls and drawn through and including non-metalic Rigid PVC Conduit ISI marked and its accessories including one run of single core 6.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs and making good disturbed surfaces and matching with existing colour complete all as specified and directed. |
| 53 | Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 50mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item. |
| 54 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I. |
| 55 | Supply and Fix Cable end termination kit for LT 1.1 KV Cable for Cable 70 Sqmm 3.5 Core cable complete all as specified and directed . |
| 56 | M&L in replacement for earthing complete with copper earth plate electrode of size 600 x 600 x 3.15 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to Copper strips 20X3 mm by means of copper nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 5 of SSR Part-I all as specified and directed. NOTES : The unit rate includes for protection pipe and Copper strip from top of earth plate up to 7.00 meter above ground level. |
| 57 | S& F in replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles duly fixed over epoxy electrical insulators or any other indicated situation for loop earthing etc as required with 32 x 6mm copper strip duly brazed complete all as specified and directed. |
| 58 | Supply and Fix Aluminium strip 25 x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground and over roof over porcelein insulators complete all as specified and directed |
| 59 | S & F in replacement Test point terminal block made of gun metal or Phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw in a test point box complete all as specified and as directed. |
| 60 | S&F in replacement GI Pipe of 32 mm Dia, ISI Marked , light grade to cover the earth strip Complete all as Specified and directed |
| 61 | Supply and Fix in replacement Thermoplastic Cable Junction Boxes IP66/67 \\"weather proof\\" , for outdoor installation without mounting plate with Transparent Lid of Size 217 X 253 X 115 mm for mounting of Test Point and including Necessary civil works and complete all as specified and directed by Engr-in-Charge. Make Cat No. KG9003 of Hensel or equivalent in sintex |
| 62 | S&F Epoxy electrical insulator(heavy duty) for fixing of Copper/Aluminium Strip/GI wire complete all as specified and directed. |
| 63 | S&F in repair air termination, single pointed copper rod, 12 mm dia and 600 mm long, fixed on GI pipes with earthing strips for earth coductivity to ground complete all as specified and directed.(NOTE: GI pipe & earthing strip shall be measured and paid seperately) |
| 64 | Supply & fixing Rotary gear pump completed with single phase 230 v AC Electric motor, mounted on common base frame Pump model HGP-070 Size suction delivery 3/4\\"x3/4\\" capacity 30 LPM speed 1440 RPM pressure 4 Kg/Cm2 motor 1.0 HP complete all as directed. Make : ROTODYNE/CIVCON Rotary gear pump, KSP or equivalent. |
| 65 | Design fabricate ,supply ,install testing and commisioning of LT feeder pillar box of size 600 x 450 x 300mm , CPRI approved outdoor TYPE fabricated with 3.15 mm thick CRCA sheet steel front and rear openable double door vertical type installed over properly supported legs suitablily grouted to PCC with Copper bus bar 400 Amps including following accessories : -(a) MCCB 100A Four Pole -01 Nos (incomer)(b) Digital Voltmeter 0-500 V with selector switch-1 set(c) Digital ammeter 0-30 Amp with 3 Nos CTs & selector switch-2 set(d) Phase indicator lamps (RYB) -1set |
| 66 | S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing/hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed. |
| 67 | Supply and fixing 5 star rated ceiling fans AC 230 Volts single phase 1200 mm sweep complete with flexible wire from ceiling rose and all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. |
| 68 | M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light/Fan/Bell Point controlled by One 1-Way Switch 5 Amp, duly fixed with copper lugs and flexible pipe from ceiling rose to fitting/fixtures complete all as specified and as directed. |
| 69 | Supply, laying and testing Tubes, 'Light Grade' galvanised, 40 mm bore with all fittings; laid in trenches, complete all as specified and as directed. Make:- Sail/Tata/Jindal. |
| 70 | M &L in replacement of supports, clamps, straps D-clamps, back plates and MS frames fabricated from structural steel sections such as MS channel, angle iron and flats of suitable size etc including nuts, ,bolts, washers eye hooks, welding, bending cold or hot drilling holes for bolts in any shape or size including two coats of synthetic aluminium paint over a coat of red oxide primer after preparation of steel surface complete all as specified. |
| 71 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and MS frame as per size suitable to fix and louvers complete all as specified and directed . |
| 72 | Material and Labour for making holes on Walls any type as per size of Exhaust fan making good disturbed surfaces to match with the existing putty and colour complete all as specified and directed. |
| 73 | Supply, Fixing and Testing Powder coated Outdoor street light control box of size not less than 300 x 200 x 80 mm CRCA 3 mm thick IP 65 fabricated by CPRI certified panel manufacturer including suitable terminal TPN 10 KA SMC Connector (for 3 Phase Cable Line IN & OUT) and provision of dimrail for mounting 3 Nos MCB SP including S&F 01 No MCB 10 A SP C curve , canopy weather proof, hinged door with allen key locking arrangement for fixing on PCC / Steel Poles in and including necessary MS Clamps - 02 Nos of size 300mmx25mmx5mm shape and size with nut, bolts and washers as per site requirement for cemented pole complete all as specified and directed. |
| 74 | Supply and Fixing PVC Insulated wire copper conductor 3 core 2.5 sqmm connected with street light to junction box complete with suitable for steel tubular pole and all as directed. |
| 75 | Supply and fixing Energy saving & environment friendly LED street light fittings made out of pressure die cast anodized aluminium housing having capacity 60 watt high efficiency polycarbonate UV stabilizer cover with integrated lens to ensure asymmetrical light and overhall IP protection IP 65 or better all as directed. Make of luminaire Havells, Philips, Wipro. |
| 76 | Material and labour in replacement for mounting bracket made out of galvanized iron medium grade of 32/40 mm bore of pipe bended into required shape and size of 1.5 mtr including necessary flat iron clamps made out of 25x4mm flat iron, nuts, bots & washers suitable for steel tubular pole/ on wall and painting of clamps, branches etc complete all as directed. |
| 77 | M&L cement concrete 1:3:6 (40mm graded aggregate) as in foundation of poles, cum stays, etc. including formwork (as/if required) complete all as specified and as directed. |
| 78 | M&L cement concrete 1:2:4 (20mm graded aggregate) as in coping of poles, etc and cum finishing the concrete surfaces fair and even including necessary formwork required at site(s), complete all as specified and as directed. |
| 79 | Supply & Erecting steel tubular swaged pole type 410-SP-31 (9.0 Metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, nuts, screws including applying two coats of black bituminous paint internally and externally from bottom end of pole upto PCC coping and applying with two coats of aluminium painting over a coat of red oxide primer (externally from top of coping) including writing MES pole No with synthetic enamel paint (First Grade/quality), complete all sa specified and as directed.Note: Earthwork, cement concrete etc. will be measured and paid under appropriate items. |
| 80 | Supply, Install, Testing and Commissioning of Solar Hot Water System (Flat Plate Collector) based on indirect transfer of heat of capacity 300 LPD with electrical backup heaters and electric cables, Complete with fast nuts , clamps and necessary fittings required as directed by OEM and Fixing of Solar plates with required angle of incidence of rays as per OEM standards complete all as specified and directed . |
| 81 | Supply, Install, Testing and Commissioning of Solar Hot Water System (Flat Plate Collector) based on indirect transfer of heat of capacity 200 LPD with electrical backup heaters and electric cables, Complete with fast nuts , clamps and necessary fittings required as directed by OEM and Fixing of Solar plates with required angle of incidence of rays as per OEM standards complete all as specified and directed . |
| 82 | Supply and fixing of Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore duly clamped on walls complete all as specified nd directed. |
| 83 | Sypply and fix 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for Hot & Cold water supply all PP-R plain and brass threded polypropylene random fittings laid to walls, ceiling or in floor etc for bore of pipe 20 mm OD complete all as specified and directed |
| 84 | Making Connections of PP-R Distribution Branch wit PPR- Main of 63mm dia size by providing and fixing Tee of 40mmX32mm including cutting and making fusion joint etc complete all as specified and directed. |
| 85 | Supply and Fix Gate valves (brass insert) for bore of pipe 20mm OD complete all as specified and directed. |
| 86 | Supply & Fix Bib tap 15mm , fancy type chromiurn plated cast copper ally with crutch or butterfly handle, screwed down,screwed for iron pipe or brass ferrule and fixed complete all as specified |
| 87 | M&L for brick work with flyash bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 complete all as specified and directed. |
| 88 | M&L for 10mm thick rendering on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed. |
| 89 | M&L for PCC of type B2 1:2:4 ( 40 mm graded agrgregate) cement concrete in foundation/ road filling complete all as specified and directed. |
| 90 | S & F Rotational moulded polyethylene water storage tanks of capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 91 | M &L in replacement of supports, clamps, straps D-clamps, back plates and MS frames fabricated from structural steel sections such as MS channel, angle iron and flats of suitable size etc including nuts, ,bolts, washers eye hooks, welding, bending cold or hot drilling holes for bolts in any shape or size including two coats of synthetic aluminium paint over a coat of red oxide primer after preparation of steel surface complete all as specified. |
| 92 | M & L Submain wiring with 2 runs of single core 2.5 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Casing Caping ISI marked and its accessories including one run of single core 2.5 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs complete all as specified and directed. |
| 93 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core complete all as specified and directed. |
| 94 | M & L for sub main wiring with 4 runs of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 10 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in concealed connected to DB or Main Board duly fixed copper lugs of suitable size as per site requirement complete all as specified and directed.Make :- Polycab/Havells/RR Kabel/KEI |
| 95 | S & F in repairs sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified . Make-L&T/Schneider/ Legrand/Seimens. |
| 96 | S & F MCB FP 415 volts suitable for fixing in MCB TPN DB of capacity 63 amps complete all as specified and directed. Make-L&T/Schneider/ Legrand/Seimens. |
| 97 | S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. |
| 98 | Supply, installation, testing and commissioning of All In One Solar Street Light street lighting ofwattage - 30W LED, with all necessary clamps accessories suitable for 2 days autonomy including solar PV panel Monocrystalline type 12V 75Wp +/_ 10%, Lithium Ferro Phosphate Battery 12.8 V 24 Ah , Efficiency >93%, IP 65, Life span 50000 hours,System Lumen Efficacy125Lumen/W ,Total lumen out put >5000 lumen, MPPT charge controller 12V, 5A,LED with Life span of 50000 Hours , Inbuilt DC Type Driver, Aluminium Extruded Body with OEM Logo, , battery casing with IP 65 protection, Dusk to Dawn Operation provided along with intelligent dimming profile, with necessary protections like i. Over charged Protection , ii. Deep Discharge protection , iii. Over current protection iii. Short Circuit protection, v. Overvoltage Projection as required mounting brackets, , etc. with LED display to indicate the charging status of battery , , automatic ON-OFF system and other accessories and systems complete, brackets and supports, mounting clamps, necessary cabling, wiring and conduiting etc. Complete all as specified and directed . |
| 99 | S & F GI Pipe medium grade of size 80mm dia of length 6m each for fixing of solar street lights complete all as specified and directed |
| 100 | Supply, laying & testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size: -(a) 95 Sqmm 3.5 core |
| 101 | (b) 35 Sqmm 3.5 core |
| 102 | M&L for earthing complete with steel earth plate eletrode 60cm x 60cm x6mm thick buried dirctly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plat not less than 1.5 mtr below ground level connected to GI strip 32 X 6mm by means of bolts. nuts,check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connection in ther main distribution box with lugs and GI nuts,bolts, earthing shall be done all as per shown electrical plate No 5 of SSR part 1 Including neccessary excavation in disintergratedand hard soil and 20mm dia GI pipe with funel for watering PCC earth chamber 100mm thick precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engr -in -Charge. |
| 103 | Design fabricate, supply, install testing and commissioning of LT feeder pillar box, CPRI approved outdoor TYPE fabricated with 3.15 mm thick CRCA sheet steel front and rear openable double door vertical type installed over properly supported legs suitability grouted to PCC with Copper bus bar 400 Amps including following accessories :-(a) MCCB 250A Four Pole -01 Nos (incomer)(b) Digital Voltmeter 0-500 V with selector switch-1 set(c) Digital ammeter 0-30 Amp with 3 Nos CTs & selector switch-2 set(d) Phase indicator lamps (RYB) -1set |
| 104 | Material and Labour for AC Socket with MCB DP 25 Amps , starter switch and Socket with Plug Top and indicator complete complete all as specified and directed. |
| 105 | S & F sheet metal enclosure MCB VTPN 08 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 160 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. |
| 106 | S & F MCCB 4 Pole 415 volts 125 Amps with thermal - magnetic release with breaking capacity 25 KA and with adjustable overload setting complete all as specified. |
| 107 | S & F MCCB 4 Pole 415 volts 400 Amps with thermal - magnetic release with breaking capacity 25 KA and with adjustable overload setting complete all as specified. |
| 108 | M & L Submain wiring with 4 runs of single core 6 sqmm PVC insulated FRLSH unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC concealled conduit ISI marked and its accessories including one run of single core 6 sqmm PVC insulated FRLSH unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed. |
| 109 | M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Casing Caping ISI marked and its accessories including one run of single core 4.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs and flexible pipe from ceiling rose to fittings/fixtures complete all as specified and directed. |
| 110 | S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed. |
| 111 | S & F MCB SP 6 to 32 Amps C-Series 240 volts for fixing on MCB DB's all as specified. |
| 112 | Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item. |
| 113 | M&L Heat shrinkable end jointing kit (outdoor type) suitable for 1100 volts grade LT under ground cable of Sizes from 70 to 95 sqmm 3.5 core as per requirement at site complete all as specified and directed . |
| 114 | M&L Heat shrinkable end jointing kit (outdoor type) suitable for 1100 volts grade LT under ground cable of Sizes from 35 sqmm 3.5 core as per requirement at site complete all as specified and directed . |
| 115 | S&F in replacement GI Pipe of 40 mm Dia, ISI Marked , light grade to cover the earth strip Complete all as Specified and directed |
| 116 | Supply and lay cable XLPE Insulated screened Meter PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core. Make:- polycab/Havells/KEI |
| 117 | S & F energy saving new generation enviromental friendly long life with high luminous efficiency upto 150 LPW made of aluminium die cost housing power coated with integrated LENS optical cover glose free with uniform distribution constant current potted electronic driver suitable for operation of 240 V, 50 Hz AC supply with inbuilt surge protection of more than 10 KV, power factor 0.95 or more, conforming to IP 66 & IK07, CPI-70, CCT-5700 with electronic driver of 200 watts with pre-wired & necessary mounting arrangement duly connected with 2.5 sq mm three core flexible copper conductor cable multistranded complete all as specified and directed. Please Enable Macros to View BoQ information |
