|
| 1 | Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.50 M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation.S.I. No. 251 |
| 2 | Cement Concrete with 4 cm gauge with stone ballast coarse sand & Cement in proportion 8:4:1 in foundation i/c supply of all material, labour & T&P required for proper completion of the work S.I. No. 281 |
| 3 | Cement Concrete with 2 cm gauge stone grit / single course sand and cement in proportion of 4:2:1 including supply of all material labour & T&P etc. required for proper completion of the work SI.No. 279 (a) |
| 4 | M-150 brick work in One cement and Three course sand mortar in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work SI.No. 307 |
| 5 | 4cm thick damp proof coarse cement and approved coarse 1:2 with and including water proofing material as odered by the Engineer in charge including supply of all material, labour and T&P etc required for proper completion of the work and including proper curing & shuttering as necessary S.I. No. 360(c) |
| 6 | M-150 brick work in in 1:6 (one cement and four fine sand of 1.25 F.M. mortar) Superstructure including supply of all materials, labour & T&P required for proper completion of work & also including labour cess, Royalty etc complete.S.I. No. 309 |
| 7 | R.C.C. work with Cement coarse sand and 20mm. Gauge grit in prop. 1:1.5:3 in slab excluding cost of reinforcement but including Centering and Shuttering , binding the same and cost og binding wire, supply of all material, labour, T&P. etc. complete. |
| 8 | Mild steel or iron in plain work such as reinforced or reinforce brick work (when not included in an over all rates) wrougth to required shape of necessary including bending for proper complection of the work and including supply of all steel etc. complete. |
| 9 | 12 mm thick plaster with cement and approved course sand in proportion 1:3 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work SI.No. 583. |
| 10 | Providing and laying vitrified floor tiles (BELL/KAJARIA/SOMANI or other standared make) in different sizes (thickness to be specified by the manufacturer) with water absoption's less than 0.80 % and conforming to IS : 15622 of approved make in all colour and shades laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete size of tiles 25x25 cm. S.I. No. New Item 4 Ch. 14 |
| 11 | Supply & fixing of commercial quality plywood board flush shutters 32mm. Thick confirming to i.S. i/c fixing of wooden cleats and stops and i/C fixing hinges of wooden cleats and stops and i/c fixing hinges, bolt nut handles, spring and other fitting but ex. Their supply and i/c painting with two coats of black iapan on all iron fittings.& also including labour cess, Royalty etc complelte.S.I. no 470(a) |
| 12 | Distempering two coat with oil bound distemper of approved brand and manufacture and required shade on new surface with primer and even shade over including a primer coat with cement primer of approved brand after thoroughly brushing the British Shalimar mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials. |
| 13 | Providing and fixing chlorinated polyviny chlride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one stoep CVPC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge concealed work including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes DSR 2018 no. 18.7.2 |
| 14 | Providing and fixing white veterous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets, 40mm flush bend overflow arrangement with specials of standard make and mostuito proof coupling of appoved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required. S.I. No. 17.3.1 |
| 15 | Providing and fixing water closet squatting pan (Indian Type WC pan) with 100mm sand cast iron P or strap, 10 litre low level while PVC flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtues complete including cuttig and making good the walls and floors wherever required. |
| 16 | Providing and fixing controlled flush, low level cistern made of vtireous china with all fittings complete. S.I. No. 17.19.1 |
| 17 | Providing and fixing white vitreous china wash basin including making all connections with but excluding the cost of fittings Flat back wash basin os size 630x450mm S.I. No. 17.25.1 |
| 18 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. 40mm dia (Flexible Pipe) S.I. No. 17.28.2.2 |
| 19 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board gournd fixed to wooden cleats with CP brass screws and washers complete S.I. No. 17.31 |
| 20 | Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI 12701 maked with cover and suitable locking arrangement and making necessary holes for intel outlet and overflow pipes but without fittings and the base support for tank. S.I. No. 18.48 |
| 21 | Providing and fixnig CP brass long nose bib cock of approved quality conforming to IS standard and weighting not less than 810 gms. S.I. No. 18.50.1 |
| 22 | Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40x40x6 mm angle iron ,3.15 mm 1/8\\" thick M.S. gusset plates at the junctions and corners, including supply and fixing of necessary fittings. Locks rail of 37.5 cm length Using M.S angle 40x40x5 mm for diagonal bracing. S.I. No. 517(a) |
| 23 | Supply and fixing of 10cm internal dia PVC 4\\" dia down pipe everst of chrminar make complete with bands with door at top and plain at bottom and grating and including supply of necessary MS clamps 2.5 cm x3mm fixed to walls with and including supply of 10cm long 6 mm dia nuts and bolts including washer of required size all material labour and T&P etc required for proper completion of the work and also including repair of plaster pointing etc if damage during fixing of the pipe (S.I. no. 730) Please Enable Macros to View BoQ information |
