|
| 1 | Dismantling of brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer incharge with in adistance of 60m. (S.I- 692) |
| 2 | Excavation in foundation in ordinarysoil mixed with moorum, kankar including 1.5m lift and 30m lead including all mat. Lab. T&P. etc. (S.I. NO. 281) |
| 3 | P.C.C with 40mm gauge approved stone ballast 1:4:8 cement , coarse sand, coarse aggregate including all mat.lab.t&p. etc. (S.I No. 252) |
| 4 | RCC Work with cement approved coarse sand, 20mm gauge stone grit in the propotion 1:1.5:4 including centering & shuttering, lab. & T&P all complete but excluding supply of reinforcement and its bending (S.I No. 283(1)) |
| 5 | RCC Work with cement approved coarse sand, 20mm gauge stone grit in the propotion 1:1.5:3 including centering & shuttering, lab. & T&P all complete but excluding supply of reinforcement and its bending (S.I No. 283(1)) |
| 6 | Mild steel or iron work in reinforced concrete/brick work including cutting and bending for proper comletion of the work etc all comp. (S.I No. 504) |
| 7 | M150 Bricks work in 1:4 cement .coarse sand mortar in super structur including supply of all mat. lab T & P etc.(S.I. NO. 305). |
| 8 | 12mm cement plaster 1:4 cement and fine sand in single coat on fair side of single or half brick wall for interior plastring upto floor two level including internal rounded angles chambers including supply of all mat. Lab. T&P etc. (S.I No. 17.58(2)) . |
| 9 | P/A with cement based putty of average thickness of 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth incl mat lab etc all comp.. |
| 10 | Finishing walls with water proofing cement paint of approved make and quality on new work with two coat to give to give an even shade. Incl supply of all mat. Lab and t&P etc all comp.. |
| 11 | Supply and fixing roling shutter of approved make of 80x125mm (3''x3 1/2')guage cold rolled M.S latha inter locked tbroughout their enter length and joined together at the end by cold locks and mounted on specially designed pipe shaft with bracket side guides and arrangment for inside and outeside locking with push and pull operation complete but excluding the cost of top cover and spring . |
| 12 | Providing & fixing 27.50cm . Long wire spring grade no 2 for rolling shutter . |
| 13 | Providing & fixing top cover for rolling shutter . |
| 14 | Providing & fixing ball bearing for rolling shutter . |
| 15 | Cartage of Surplus earth up to 3km distance from site etc. all comp (A/R) |
| 16 | Supply and fixing of sign board with all maT. LAB. T&P etc. comp. |
| 17 | Enamel paint two coat etc all complete. |
| 18 | Supply and wiring of sub main with two number 4sq mm FR PVC insulated multistand copper conductor cable in 32mm dia heavy quality in all respect.. |
| 19 | Wiring point for light with 1.5 sq mm PVC insulated single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated bakelite sheet etc, complete in all respect as directed incl matching colour wash.. |
| 20 | Wiring point for exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in 25 mm dia heavy duty etc all comp.. |
| 21 | Supply and fitting of button holder incl all comp of work.. |
| 22 | Supply and fitting of facing wire HPF box type flour sent light fitting dutible for 1x10 watt send flour sent tube etc all comp.. |
| 23 | Supply and fitting of 6Amp to 32 Amp SP MCB KA (10KA) legrend hexic etc all comp.. |
| 24 | Supply and fitting of power plug with 20 amp 150 flush type switch and pin 15 amp/250 volt socket in suitable M.S box 175mmx50mm size etc all comp.. |
| 25 | Supply and fitting of surface/flush molding 12 way SEN distribution board with out MCB comp.. |
| 26 | S/F of 13 watt C.F.L lighting of approved quality etc all comp.. |
| 27 | Supply and fixing of Ceiling fan usha, khetan, Bajaj I.S.I mark incl all comp.. |
| 28 | Supply and fitting of fan sheet cover back light sheet.. |
| 29 | Crazy marbla stone flooring incl filling the gaps with light shade pigment with white cement marble powder mixture (3 part of white cement 1 part of marble powder by weight of proportion of 4:7 cement marble powder mix :7 white black marble chips of size from 1mm to 4mm nominal sizes by volume with under layer 25mm thick cement concrete 1:2:4 incl etc all comp.. |
| 30 | P/L of 20mm thick kota stone flooring over 20mm thick base with 1:4 cement sand C-sand mortar finished with white cement slurrry mixed with pigment and polishing comp in.. Please Enable Macros to View BoQ information |
