|
| 1 | PA system |
| 2 | OD293094/2025-2026:Supply and installation of 325 W Bi Amplifier powered speaker system with LF: 275W RMS and HF: 50W RMS drivers, MIC and Line inputs, tone controls, 50 - 20000 Hz frequency response, etc. supplied with suitable tripod stand and all other necessary accessories. Preferred Make: Ahuja ABA-4000 or equivalent |
| 3 | OD293107/2025-2026:Supply and installation of Dynamic hand held, Unidirectional polar pattern microphone with 70-12000 Hz, ON/OFF switch, including all accessories, etc. Preferred Make: audio-technica ATR1300x or equivalent |
| 4 | OD293113/2025-2026:Supply and installation of Dual channel Wireless Microphone System with Dual Channel Non-Diversity receiver, two handheld transmitters, Individual Channel XLR output and mixed output, FR: 50 Hz-16 kHz, Display on Transmitter and Receiver for frequency indication. etc. supplied with all necessary accessories including power adaptor. Preferred Make: Studiomaster XR 40 HH or equivalent |
| 5 | OD371376/2025-2026:Supply and Installation of Custom-Made Wooden Audio rack with 0.8 m x 1.5 m x 1.5 m (Height x Width x Depth) size and with a sliding compartment suitable for placing mixing console of size 0.3 m x 0.7 m x 0.8 m (Height x Width x Depth), compartment with door for placing audio equipment like microphones, etc. |
| 6 | Cabling |
| 7 | OD371210/2025-2026:Supply and installation of 20 meters of 8 Channel snake cable with 24 AWG, 19 /0.120 mm Annealed Bare Copper inner conductors, 1.35 mm Polyethylene Dielectric, 8 pairs, 38 AWG Braiding with Bare Copper Spiral Shielding, 14.00 +/- 0.50 mm soft PVC Outer Jacket, 3.30 +/- 0.10 mm Sheathing, etc. Preferred make: FALCON or equivalent |
| 8 | OD371213/2025-2026:Supply and installation of 15 meters of 8 Channel snake cable with 24 AWG, 19 /0.120 mm Annealed Bare Copper inner conductors, 1.35 mm Polyethylene Dielectric, 8 pairs, 38 AWG Braiding with Bare Copper Spiral Shielding, 14.00 +/- 0.50 mm soft PVC Outer Jacket, 3.30 +/- 0.10 mm Sheathing, etc. Preferred make: FALCON or equivalent |
| 9 | OD339998/2025-2026:Supply and Installation of 24 AWG 19/0.120mm Annealed bare copper XLR cable with polyethylene insulation and soft PVC outer jacket through the existing conduit. Preferred make: Belden, MX, Falcon, Krystal |
| 10 | OD339853/2025-2026:Supply and installation of XLR/ Phono 3 pole male/female connector with Nickel housing and silver contacts. Preferred Make: Neutrik, MX |
| 11 | OD339856/2025-2026:Supply and fixing of Screw-In stainless steel Wall plate with 1 x 3 Pin Female/Male, XLR/Phono socket, 86 mm x 86 mm approx. in dimension, Pre-drilled holes, etc. Preferred make: PRO-SIGNAL PSG08152 AV or equivalent |
| 12 | OD339862/2025-2026:Supply and Fixing Plastic Modular Surface Box suitable for modular Wallplate on surface with all accessories (86 mm x 86 mm approx.). Preferred Make: Honeywell, Legrand, 3C3 or equivalent |
| 13 | OD339863/2025-2026:Supply and fixing following size, IS tested, GI box for modular Wall plate in recess etc. as required. (86 mm x 86 mm approx.) |
| 14 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm Please Enable Macros to View BoQ information |
