|
| 1 | Dismantling brick work tile, masonry or tile lining In cement hydraulic works submerged under water |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil Mechanical Means Depth upto 3 m |
| 3 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification |
| 4 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump |
| 5 | Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) |
| 6 | Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes |
| 7 | Dressing side slopes and preparation of sub grade for lining. |
| 8 | Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing :- 0 to 1.5 m depth |
| 9 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. |
| 10 | Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 11 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 12 | Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. |
| 13 | Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 14 | Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge |
| 15 | Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge. |
| 16 | Providing & Fixing Alloy STEEL Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge. |
| 17 | Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 18 | Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge |
| 19 | Providingof hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in chargeSIDE SEAL 22 dia 57X8 |
| 20 | Providing and fixing in position flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer-in-charge WEDGE TYPE BUTTOM SEAL 75X10 |
| 21 | Providing and Fixing GI Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge. |
| 22 | Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge. |
| 23 | Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge. |
| 24 | Providing High Speed Diesel |
| 25 | Labour for Oiling and greasing of gates |
| 26 | Applying priming coat with metal primer on new steel or iron work i/c preperation of surface. |
| 27 | Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete. |
| 28 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide. |
| 29 | CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges |
| 30 | Providing and Fixing MS Spindle of .5 Ton Capacity |
| 31 | Providing and Fixing GI pipe of 1.5\\" dia complete in all respects and to entire satisfaction of Engineer-in-charge |
| 32 | Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type |
| 33 | Any Other Item Please Enable Macros to View BoQ information |
