| 1 | T-BOLT (Locking Screw ) WITH DOUBLE NUT & SPRING WASHER as per Plasser Part no. 61.0 4.218 and RDSO drawing no. TM/9302(revised), Make : Plasser or its Equivalent ] |
| 2 | DIST WASHER as per plasser part no. UD64.47-0.1mm/UD64.47-0^1, Make - PLASSER or its Equivalent ] |
| 3 | DIST WASHER as per plasser part no. UD64.49-0.75mm/UD64.49-0^75, Make - PLASSER or i ts Equivalent ] |
| 4 | CLEVIS as per Plasser part no. HZ60.01-1, Make- PLASSER or its Equivalent ] |
| 5 | SWITCH RING as per plasser part No. WN75.1950-3, Make- PLASSER or its Equivalent ] |
| 6 | HOOK FOR LIFTING as per plasser part no. PB150.62A-001 and sub part no. PB150.62, Make - PLASSER or its Equivalent ] |
| 7 | CHUTE as per Plasser part no 64.09.1000.96 , Make-Plasser or its Equivalent. ] |
| 8 | DREDGER DRUM GEAR as per plasser part no 61.04.519, RDSO SPEC - TM/HM/6/498 AND D RG - RDSO/TM/13/21 ,MAKE:-PLASSER or its Equivalent ] |
| 9 | BALLAST SCREEN as per Plasser part no 64.09.5343 SIEVE SIZE 50MM 680-1275MM ROD W OVEN TYPE MATERIAL SPEC. ISO2062-2011 WITH AMENDAMENT NO 01-2011 GR.E250A, MAKE - PLASSER o r its Equivalent. ] |
| 10 | SHAFT as per Plasser part no. 64.09.7185 with RDSO drawing no. RDSO/TM/07/24 and speci fication TM/HM/6/557, Make - PLASSER or its Equivalent. ] |
| 11 | U CLAMPS (U Bolt) 16MMx165MMx60MM as per Plasser Part No. 64.09.1066 (Screw), 64.09. 5208 (Spacer), 62.14.2182 (Nut), Make- PLASSER IND or Equivalent ] |
| 12 | ROOF CHUTE as per plasser part no. 64.10.1483, Make- PLASSER or its Equivalent ] |
| 13 | LEVER as per plasser part no. 64.09.7138, Make- PLASSER or its Equivalent ] |
| 14 | ROOF CHUTE as per plasser part no. 64.10.1484, Make- PLASSER or its Equivalent ] |
| 15 | COLLOTTE as Per Plasser Part No. 64.09.1213, MAKE - PLASSER IND or its Equivalent ] |
| 16 | FRONT PLOUGH as per Plasser part no. CRW800.901A-LI-SP1000, MAKE - PLASSER or its Equ ivalent ] |
| 17 | LEVER as per plasser part no. GLF251.502-R, Make- PLASSER or its Equivalent ] |
| 18 | FORK HEAD as per Plasser part no. UD214.1515 with RDSO Drg. No. RDSO/TM/06/17 & RDS O Spec No. TM/HM/6/388, MAKE - PLASSER or its Equivalent. ] |
| 19 | FEELER ROD FOR 09-3X as per Plasser part no UD251.8402-HV , Make-Plasser or its Equival ent. ] |
| 20 | JOINT HEAD as per plasser part no. HZ70.01-2, Make- PLASSER or its Equivalent ] |
| 21 | PIN as per plasser part no. WN102-35H11.122,5.8-1/WN102-35H11.122^5.8- 1, Make - PLA SSER or its Equivalent ] |
| 22 | Scrapper finger (wear plate) as per Plasser Part No: 63.08.2005 for use of HOBCM Machine. Acceptable Make: Plasser IND or Equivalent scrapper finger Minimum life shall be 50 kms. ] |
| 23 | CIRCLIP AS PER PLASSER PART NO 62.08.2005 FOR THE USE OF HOBCM MACHINE. ACCEPTABLE MAKE: PLASSER IND OR EQUIVALENT ] |
| 24 | Intermediate link complete AS PER PLASSER PART NO RE08.01.102-B FOR THE USE OF HOB CM ACCEPTABLE MAKE PLASSER MAKE IMP OR EQUIVALENT. WARRANTY MINIMUM SERVICE LIFE SHOULD BE 80 KM ] |
| 25 | RUBBER RING 56X32X8 WITH SPACER RING as per plasser part No,W33.83 WITH W33.159, Make- PLASSER or its Equivalent. ] |
