Railway Ancillaries Tenders from India

supply of , brass test sieves 200 mm dia size- 90mic & 75mic.

supply of , buffer projection gauge for measuring the projection of side buffer, range: 570 mm to 665 mm, accuracy: +/- 1.0 mm, warranty: 12 months, to be packed in wooden storing and carrying box make: pie or similar. item to be supplied along with calibration certificate from nabl/nabl accredited lab/govt. approved lab., wheel/tyre defect gauge (condemning gauge) for bg coaches as per railway boards approved irca part iv, rule 2.8.4 and plate 38, made of 3 mm thick hard alloy steel plate, use...

supply of , stone 10v std 10.23x6.00x3.25 as per loram part no. 144591. [acceptable make : loram]

supply of , set of spare material for smc 665 compressor of rri and non rri location of mumbai division as per annexure.

supply of , brass test sieves 200 mm dia size-4.75mm, 2.36mm, 1.18mm, 600mic, 300mic, 150mic, & lid pan.

supply of , g. i. earthing strip size 25 x 3 mm in standard length of 2.7 mtr as per sketch attached.

supply of , complete rotor (balanced) suitable for pds make 25 kw alternator to rdso specification no. rdso/pe/spec/ac/0056-2014 ( rev.0) and p.d. steel part no. pds a025030

supply of , set of switch plate assemblies for lhb eog ac 3 tier coaches to icf/edml- 007. rev-a

supply of , spindle for hand brake small for boxn hl to rdso drawing no wd-05086-s-19, item no.13,alt- 8.

supply of , supply & installation of storage shelves for medicine dispensing on replacement account storage shelving unit asu 2175: (size : 2175 x 900 x 400 mm) 1 set of asub 214 shelving body 10 nos of shelves asus 400 (size : 900 x 400mm) 40 nos of artb 40 in make alkon or equivalent in makes: methodex[or] nilkamal [or] godrej

supply of , rear rigid window assembly to dlw pt.no-17044534 and drg no- d17044534 or alt- c.

supply of , 750/110v control transformer, 100va single phase %u201ch%u201d class insulation, insulation-6kv suitable for fitting in hv panels of lhb non ac coaches..

supply of , one set of axle mounted disc brake equipment for lwlrrm bogie consisting of 1.brake caliper unit-right including brake caliper, brake cylinder and brakepadtoftril drg. no. 090 0020 00 (with brake pad) 4f 125155 or knorr bremse drg.no.c76302/a, c76299/b and c177349, qty - 2 nos 2.brake caliper unit-left including brake caliper, brake cylinder with handbrake attachement and brake pad to ftril drg. no. 090 0020 00 (with brake pad)4f 125187 or knorr bremse drg. no. c88072/2,c76299/a and...

supply of , monogram for sab, size :- 3 inch x 3 inch x 1mm thickness, as per drg. no. secr/sk. no. wrs/r-1601.

supply of , eye bolt m-45 with bush, nut & lock nut for bobrn wagon to drawing/specification rdso drg no wd-92081-s-57, alt no 10, item no 2 and dimension of the bush as per wd-92081-s-53, alt no 3, item no 2.

supply of , set of driver seat cover for wag7 locos. each set consisting of 04+04=08 nos.seat cover consisting (top and bottom) for both cabs as per drg. no. trs/bia/wag7/11-12.

supply of , leather washer suitable for auxiliary reversor drain plug and brake cylinder drain plug confirming to appendix-e of rdso specification no.2 abr-02 amendment no.03 or latest

supply of , stainless steel bottom housing unit for battery charger as per model -ii of cewe/per drg no. dlx/dr/05/12/01. (dimension : a-1038mm, b-958mm, c-705mm, d- 627mm & e-205mm). material should be of ss304 grade and wall thickness to be of 3mm, stainless steel bottom housing unit for battery charger as per model -1 of cewe/per drg no. dlx/dr/05/12/01. (dimension : a-1055mm, b-975mm, c-590mm, d- 505mm & e-195mm). material should be of ss304 grade and wall thickness to be of 3mm, stainless ...

supply of , high speed steel ( 6:5:2 + 5% cobalt ) with 6 straight flute machine bridge reamer, size:- 17.5 mm dia as per is:5919-1978 ,rev-1 ,amdt. no. 1 to 3.make:- extol or equivalent.

supply of , set of 32 pin harting each set consisting of the following spares and part nos. a)han b hood top entry lc 4 pegs m32 to harting part no.19300161422 b) han 32 ee crimp term insert male to harting part no. 09320323001. c) han ee 32 pos insert female crimp to harting part no. 09320323101. d) han 16b-hbm-double lever to harting part no. 09300160301. e) han e m crimp contact ag 2.5mm/14awg to harting part no. 09330006102. f) han e f crimp contact ag 2.5mm/14 awg to harting part no. 09330...

supply of , fork for pull rod of boxn wagon secr sketch no.wrs-1284, alt.nil

supply of , accessories (lock box arrangement) for emergency openable window to drg.no.icf/sk-5-4-275 alt.f item nos.19,18,17,16,15,14,13,11,10,8 & 7

supply of , supply and installation of storage shelves for medicine dispensing unit asu 2175: (size : 2175 x 900 x 450 mm) 1 set of asub 2145 shelving body 12 nos of shelves asus 450 (size : 900 x 450mm) 30 nos of psb 455 panda bin 2 nos of sb 7 in make alkon or equivalent in makes: methodex [or] nilkamal [or] godrej

supply of , glass window for wider cab door. as per drg.no. dlw pt. no. 17420088

supply of , terminal box cover with packing for traction motor type hs 15250a to hitachi's drg. no.- 10s.813.539 (alt.-b).

supply of , aux. portection relay q-118 with jss/mil gr. electronics component timer & other requirement as per clw spec. no. clw/es/r-27, alt.-z

supply of , aux. contact support assembly with 6 aux. switch as per clw drg. no.4twd 112.090, alt.-5, (sheet no.0)

supply of , chronomatic time lag assembly timer for c118 with mounting plate for ac locomotives wap4/wag7 as per clw specification clw/e5/c-15/d.note: one sample to be got approved before effecting bulk supply hsn code: 8607

supply of , m s hexa bolt & nut (g.i.) mild steel class 4.6. bright zink electro plated hexa bolt, size: 10 mm x 60 mm length and hexa nut : size:10 mm dia. is: 1363 / part - i / 92

supply of , s.s. / cu tube cutter wheel for hand tube cutter. size:- 3 / 16"-1" o / d, as per spec.

supply of , pvc basket semi virgin quality 17 inches

supply of , tyre with tube no. 195-70-r-14 suitable for toyota qualis. tavera, make -- mrf, ceat, appolo.

supply of , quick release machanism. make- faiveley, part no. 546102000.

supply of , pvc flooring (vinyl) width 1620mm minimum lenght 14 meters and thickness 2mm roll to rdso spec,no.rdso/2006/cg-12,rev.1 amdt.2 with pvc welding electrod the length shall be three times of pvc sheet.sample code for ac coaches ac-flg-01.

supply of , contractor for head light auxiliaries compressor and gusp(pos no.48.2,338,218.2) & auxiliary contra for contractor auxaliries( pos no.52.3,52.6),type s- 163cidt/110v as per clw specification no.clw/es/ 3/0034- b or latest

supply of , centre pivot top for casnub 22 hs (mod-1) bogie to rdso drg. no.wd-97049- s/03, alt.8, item no. 2 and rdso specn.no.wd-34-casnub-22 hs (mod-1) 2004 with 4 amendments and last amendment is issued on sep.2016

supply of , measuring and monitoring relay (mmr) to monitor 3 phase power supply to voltage range 750 volt +6% /-9% ac, 50hz to model no. carlo gavazzi dpc 01 d m69 or abb cm-mpn 72s make acceptable : carlo gavazzi/ dold/ abb only. oems or authorised dealers only to quote with documentary evidence.

supply of , hand brake bevel gear box cover. drawing no. irss drawing no w/bg-1134, al.t-1. material and specification: as per drawing.

supply of , wiper arm assembly for demu/dpc as per annexure. hsn code: 8512

supply of , shunt (long) to m/s sil new ref no. s0220133203 or m/s cpl part no. c0320 or m/s gsec drg no. gsec/panto/105 & cre ref no. 0103032 for am12/ir01/pan01/el-01 type pantograph.

supply of , set of lock nut f.s. all steel as per clw specification no. clw/ms/3/089 alt-2 april -2007 consist of (1) size m10 as per abb drg. no. 182-00493-003 rev-3 qty.-128 nos. (2) size m12 as per abb drg. no. 182-00493-004 rev-3 qty.-64 nos. (3) size m16 as per abb drg. no. 182-00493-005 rev-3 qty. 84 nos. (4) size m20 as per abb drg. no. 182-00493-006 rev-3 qty.- 8 nos. (5) size m24 as per abb drg. no. 182-00493-007 rev-3 qty.- 72 nos

supply of , cylindrical roller bearing for axle box bearing unit of wap-7 loco cru-150 to m/s skf/ germany ,skf no. bc2- 0067a, or m/s skf technologies (india) pvt. ltd. ahmedabad, skf no. bc2- 0067d/w33 or m/s nei/jaipur, nei no. rb 5080d or m/s schaeffler india limited, maneja, vadodara f-807259.02.zl (with greasing hole )

supply of , machine bridge reamer 24 mm with six straight flute . material and specification - is:5919 / 1978 (1st rev.) reaffirmed 2002 with amnd - 3 of dec 1996.

supply of , hss drill twist 28.75mm diameter with tapered shank, made of high steel confirming to is 5103, supply of drill twist 26.5mm size as per description attached, hss taperd shank drill twist 31.75mm is 5103

supply of , supply of e&m interface card for puncom make primary mux model: v-mux 100 as per rdso specification no. irs :tc 68/2012 rev.0 amdt.-1 with latest amnd.

supply of , valve distributor type c3w-l-gp-v6m24 (without support reservoir), isolating cock with filter to wabco's pt.no.1903971308.

supply of , rubber gasket for vacume circuit breaker cat.no. p/0/0236 c & d no. t016/564 as per drg.no. clw/es/3/0666 alt nil as per specn. drg.no. clw/es/3/0666 alt.nil, rubber gasket for assembly of ocb and ocr cat.no. p/0/0235 c & d no. t020/467 as per drg.no. clw/es/3/0667 alt 1 as per specn. drg.no. clw/es/3/0667 alt.1

supply of , crank shaft compressor exhauster 6cd x 4uc to s.e.rly.drg.no.grc/dl/cx- 217 alt-nil/ne-1

supply of , polyvinyl expansion base moulding size: 60 mm. x 15 mm. x 2000 mm. x 3 mm. thick to.sk. no. llh-02/2009, item no. 8, alt no.2, colour:rhine blue [5953] of dulex weather shield and rdso's str no. rdso/2015/cg-02 [rev.01] of march, 2016.

supply of , manufacturing and supply of sand storage box : stainless steel box of size: 4feet length x 2.5 feet height x 2 feet width in 20 gauge sheet with 25x25x3mm thick ss angle at all the six corners of the box with 50mm hinges at three points for the door along with two handles to pick the empty box . material: ss 202 grade, sheet thickness: 20 gauge (1mm thickness), angle size: 25x25x3mm thickness.

supply of , one set consisting of 24 items (part no, and quantity) as per the list of items enclosed for the use of battery operated truck, 4 wheeler of make: jost, 2 ton capacity & bot nos 9032, 9033, 9034, 9035, 9036, 9037, 9038, 9039, 9044.make:jost only

supply of , contactor coil assembly, schneider make of part no. lx1d8n5 or lxid8n7 having working voltage of 415v, suitable for 200 / 250 amps, 4 pole schneider make contactor accepted make : schneider

supply of , "o" ring set for rotex magnet valve 3038c type nw-10 as per rotex drg no. 081-055-02-c rev-2 consisting of 09 items 13 nos. (1) piston 'o' ring part no. 18, qty. 01 nos. (2) seat 'o' ring part no. 19, qty. 02 nos. (3) body 'o' ring part no. 20, qty. 02 nos. (4) pilot 'o' ring part no. 21, qty. 02 nos. (5) guide 'o' ring part no. 32, qty. 01 nos. (6) m.a. 'o' ring part no. 22, qty. 01 nos. (7) coil gasket part no. 35, qty. 01 nos. (8) manifold 'o' ring part no. 24, qty. 02 nos. (9) p...

supply of , leather bellow with mounting arrangement and hardware to setlist no. el 29940436. specification:- rdso spec. no. spec/e-7/06 (rev-2). drawing: clw drg no. 1209- 01.018.024 alt-1.

supply of , a set of spares for hytorc make 1 inch drive hydraulic torque wrench and power pack, as per annexure attached.

supply of , copper washer . size : od=14.2 mm, id= 5.8 mm and thickness = 02 mm.

supply of , vane relay suitable for fedders lloyd make rmpu, equivalent to fedders part no. flc-rly-35

supply of , one set consisting of 10 items of voltas forklift model : dvx 20 & 30 ( , part no , quantity) mentioned as per the list enclosed for vehicles 8028, 8029, 8030,8031,8032 make : voltas or equivalent

supply of , set of m.s. case & cover for track feed battery charger 10 amp as per drg no. s -swg/gzb/t/03 & s-swg/gzb/t/04.

supply of , wiper arm and blade assembly as per clw drawing no.sk.no.clw/ac/163 ref no.2

supply of , pair of high pressure hydraulic rubber hoses with wire braiding 10 nw, 10 mtrs long with end fittings as well as hose coupling loose half (argus type) and protective plug for each end of hoses and set of sealing for loose half coupling model no. fk-2010 of make francies klein & co, pvt ltd. (mfd high pressure hose)

supply of , frp louver for demu/dpc & tc size 330x330 mm. hsn code: 8414

supply of , repair kit of 14 rubber items-aluminum body knorr-bremse, make dv, list as per annexure enclosed. make : escorts / kbi.

supply of , set of 05 vinyl stickers with inkjet print to size 8 inch x 4 inch as follows. 1) 'ready' - background colour - green, font colour - white - 01 no / set. 2) 'to be oh' - background colour - orange, font colour - white - 01 no / set. 3) 'repair' - background colour - blue, font colour - white - 01 no / set. 4) 'wip' - background colour - yellow, font colour - white - 01 no / set. 5) 'condemned' - background colour - red, font colour - white - 01 no / set.

supply of , 'k'- type composition brake block for casnub bogie 1000mm wheel dia freight stock to drg. no. wd-00006-s-01, alt. no. 3, and specn.no.wd-14-abr-2019.

supply of , cam regulating for a-9 automatic brake vavlve to m/s. wabco pc no. 561362 ftrtil part no.502823000, which is equivalent to m/s. wabco cat no. 561362. material to procured from rdso approved sources.

supply of , supply of spare parts kit for ajit make web offset printing machine year of model 1997 or similar consisting of following spare part items sl.no 1) universal joints qty:01no, 2)cutting knives qty:01no, 3)delivery belt qty:01no, 4)cutting rubber qty:01no, 5)dampener cloth qty:01no, 6) wooden brake shoe qty:01no, 7) salonide valves qty:01no, 8)pu pipes qty:01no, 9) tucker blades qty:01no, 10)bearings 6003 for roller qty:01no. with warranty of 12 months

supply of , no volt relay (q30), aal pt. no. ka210013 r0026, clw spec.no. clw/es/r-27, alt.-z.

supply of , service counter for pantry car. as per drg. no.: wcb - 6 - 4 - 102, alt - j, as per spec.: mat. specn. as per drg.

supply of , spheri block for traction motor for wap-5 locos as per clw specification no. clw/ms/3/005 alt-02 and clw drg.no.-1210-01-218-013.ref-3 (abb drg.no.-ia 016-00269,rev 9.)

supply of , supply of wire wound resistance, capacity 100 ohms/ 10w. for achieving time delay in signalling circuits.for achieving time delay in signalling circuits indian railway

supply of , supply of spare parts kit for pivano perfecta-1 paper cutting machine 1957 model or similar consisting of following spare parts items: sl.no 1) p.u. beds qty:01no, 2) carbon boxes qty:01no, 3) electrical fuse qty:01no,4) v belts qty:01no, 5) knives qty:01no, 6) hydraulic hose pipe with nozel qty:01no. with warranty of 12 months

supply of , 3 yearly overhauling kit for ccb 1.5 (special kit) (1) o ring for bcev valve 738974-01 no. (2) o ring for bcev valve 751374-01 no. (3) o ring for bcev valve 738362-01 no. (4) o ring for j1 relay valve 734686-03 nos. (5) gasket pipe braceket for bc relay valve 733328-01 no. (6) o ring for vent valve 738796-02 nos. (7) k ring for magnet assembly 454928-02 nos. (8) k ring for magnet valve assembly 462575-04 nos. (9) k ring for magnet valve assembly 457353-02 nos.

supply of , step sheet to rcf drg. no. az10136 alt 'a'. mat. and spec. as per drg irs:m41-97

supply of , 6 pin emergency socket as per rdso specification no. irs - tc - 42/87 with amendment no. 3. or latest.

supply of , multiplier card make: cg power and industrial solution ltd. reference no.-110202286, power supply card make: cg power and industrial solution ltd. reference no. 110202191, analog routing card make: cg power and industrial solution ltd. reference no.-110202193, digital i/o card make: cg power and industrial solution ltd. reference no.-110202194, mvb coupler card make: cg power and industrial solution ltd. reference no.-110202195

supply of , supply of aluminum electrolytic condenser, capacity 50v/20000 mfd.the material is used for achieving time delay in signalling circuits.for achieving time delay in signalling circuits.for achieving time delay in signalling circuits indian railway

supply of , 'l' handle 3/4 inch sq drive (19mm) length 460mm, made of chrome vanadium steel with knurled grip can with stand. torque upto 1000 ft lb, weight not less that 1880 gm and not more than 2000 gm. chrome plated finish. din iso 2351-1:2007 & din iso 691:2007 certified std. make- honiton / gedore / proto / tulex / snapon / sweeny / bluepoint.

supply of , set of hose pipes consisting of 03nos for the use godrej make forklift trucks, make: super seal or poly hose or emflex 1.hyd hose rub sae100r6, part no.mh39550718-10nos, 2. hyd hose rub sae 100r4 id 1 1/2 -10nos, 3. air hose rubber saej20 part no.mh02367750-10nos

supply of , set of spare part of crowned gear coupling for wap-5 locos consisting : (1) locking disc as per mackiel part no. 09 or zf part no. 5080302458,qty- 02 nos. (2) set of locking ring as per mackiel part no. 05 or zf part no. 5080302460,qty- 02 nos. (3) adopter ring as per mackiel part no. 06 or zf part no. 5080302459,qty - 02 nos. (4) cover as per mackiel part no. 08 or zf part no. 5080302457,qty- 02 nos.

supply of , bearing 4206-bb-tvh. make-skf/fag/nbc/nsk for articulation assembly of pantograph ir- 03h. tender specific authorization from skf/fag/nbc/nsk to be provided along with offer or else to offer will be passed over.

supply of , air flow indicator (part of air gauge complex - three gauge for emd locomotives). dlw pt no. 17452508, emd part no. 10631881.

supply of , overhauling kit for duplex check valve of m/s faiveley. make to part no. 790039105 or confirming to rdso's specn. no. c-k-407 (rev-2) ammendment-1 of oct'2016 consisting of 04 items as per annexure-4 hsn: 9032

supply of , water washable florescent liquid dye penetrant, capabale to detect crack up to 20 microns depth, conforming to is: 12889/1989, shelf life 02 years from dt of mfg. packing - 20 ltr. suitable container.

supply of , design, manufacturing and supply of seating arrangement along with accessories for fitment inside camp coach as per nbqs drg no.2020/12/0679(c) hsn code: 9402

supply of , v-belt, size:a43 for godrej & voltas make forklift trucks, make:fenner or pix or mitsuboshi or simpson.

supply of , 'k' ring for piston valve assembly to nyab/kbi (knorr-bremse india) pt no. 457353., 'k' ring for piston valve assembly to nyab/ kbi (knorr-bremse india) pt no. 462465., 'k' ring for piston valve assembly to nyab/ kbi (knorr-bremse india) pt no. 462574.

supply of , foot switch assembly for vcd. make:hotline or similar

supply of , impeller for mvrh blower suitable for siemens/ngef/ abb make motor for sf duct type blower mlbr 60-1-h2 hub above 55 mm hub, lenght 95 mm over all dia. of impeller 750 mm with key of key wey. depth 17.25 mm

supply of , design , manufacture and supply of 04 (four) seater buffet and other accessaries for fitment inside camp coach as per nbqs' drg no. 2020/12/0680(c) hsn code: 6303

supply of , digital wheel diameter gauge model wd-2(e) with digital display measuring range-600 mm to 1200 mm for bg wheels, least count- 0.1 mm, measuring accuracy= +/- 0.3mm, display- built in led, weight- approx 750 gms, power supply- inbuilt rechargeable battery. make: pie or equivalent.

supply of , hex head plug screw m10 %d7 1 as per din 910 material as per is:13338-1992.

supply of , supply of spare parts kit for press line- 30 web offset printing machine 2012 model or similar consisting of following spare part items sl.no 1) universal joints qty:01no, 2)dampener motors qty:01no, 3)brushment rollers qty:01no, 4)cutting knives qty:01no, 5)delivery belt qty:01no, 6) pu pipes qty:01no, 7)bearings 6003 for roller qty:01no, 8)brake shoe qty:no 01, 9) tucker blade qty:01no, 10)salonide valves qty:01no, with warranty of 12 months

supply of , set of 05 vinyl stickers with inkjet print to size 4 inch x 2 inch as follows. 1 ) ready - background colour - green, font colour - white - 01 no / set. 2 ) to be oh - background colour - orange, font colour - white - 01 no / set. 3 ) repair - background colour - blue, font colour - white - 01 no / set. 4 ) wip - background colour - yellow, font colour - white - 01 no / set. 5 ) condemned - background colour - red, font colour - white - 01 no / set.

supply of , traction motor pinion pulling fixture on assemble position on gm locomotive complete set consists of; 1. high pressure adopter. qty-02 nos. 2. extension ss tube 90 degree bend. qty-02 nos. 3. high pressure manifold for ss tube (s. s. coupler w. cap. 2800 bar). qty-01 no. 4. pinion stopper (spring loaded) block. qty- 01 no. 5. centering rod. qty-01 no. 6. high pressure injector pump 2800 bar. qty-01 no. 7. high pressure injector hose 2800 bar. qty-01 no.

supply of , overhauling kit for leveling valve consisting of 13 items for air suspension system of emu /demu coaches to m/s knorr bremse pvt. ltd. / palwal(haryana) part no. ii 68831, confirming to rdso's specn. no. c-k-407 (rev-2) with ammendment-1 of oct'2016 as per annexure-1 hsn: 9032

supply of , supply and fitment of interior vinyl stickering on doorway, gangway and lavatories as per make-3m or similar, thickness - 0.3mm (eco-solvent) (sample will approve before finalisation) for conversion of coaches into camping coach. hsn code- 3919

supply of , set of stainless steel double ferrule fittings for demu tc coaches as per attached annexure (one set consisting of 28 item = 108 nos.) make = fluid controls ltd. or similar. hsn code: 7307

supply of , emd part no.8044832 dlw part no.19395012 washer.. spherical 5/8-injector as per enclosed drawing.

supply of , 1-1/4 inch cut off angle cock with vent for bp and fp as per clw drg. no. 0/2/65/386 alt-6 or latest