|
| 1 | M&L for providing Stainless Steel Grease Trap / Interceptor to trap oil, grease, food solids etc consisting of Stainless Steel 304/201 Grade material having wall thickness 1.0 mm of size 1.5 mX0.90mX0.90m and the edges shall be moulded including complete fitting polishing and excavatting for fitting of trap or removal of old Trap complete as per manufacturer instructions as approved by GE.Make : Jindal or Equivalent as per list of makes. |
| 2 | Demolition of brickwork built in cement or cement lime mortar, complete all as specified and directed. |
| 3 | Demolition of PCC of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 4 | Excavation in trenches n exc 1.5 m wide & not exc 1.5 m deep for Foundations etc. and getting out in soft/ loose soil, complete all as specified and directed. |
| 5 | M&L for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 6 | M&L for Brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6, complete all as specified. (Except brick). |
| 7 | M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even, complete all as specified and directed. |
| 8 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling/mass concrete, complete all as specified and directed. |
| 9 | Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 10 | S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 11 | Demolition of cement concrete reinforced as in Manhole cover and other work, complete all as specified and directed. |
| 12 | M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in manhole covers etc., complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 14 | M&L for 1st quality non skid coloured ceramic ENDURA tiles n exc 0.18 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4), complete all as specified and directed. |
| 15 | M&L for sand filling under floors or in foundations incl watering and consolidation, complete all as specified and directed. |
| 16 | Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and directed. |
| 17 | M&L for 75 mm thick cement concrete type-D-2, 1:4:8 using 40mm graded crushed stone aggregate finished cement concrete sub base surface, complete all as specified and directed. |
| 18 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor finish, complete all as specified and directed. |
| 19 | M & L for machine cut Kota stone slab 18-20 mm thick in treads, landings of stair case over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including & grinding polishing over and including screed bed 20mm thick in cm 1:6, complete all as specified and directed. |
| 20 | M & L for machine cut Kota stone slab as in skirting, risers 14 to 16 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror polish granite finish including backing coat 10 mm thick in cm 1:3, complete all as specified and directed. |
| 21 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material Please Enable Macros to View BoQ information |
