|
| 1 | SITC of dual channel Line array speaker with 2 x 10\\" LF, 1 x 3\\" HF driver, Frequency Response: 50-20Khz, Rms Power: 1000watt, Program Power: 2000watt, Dispersion: H100°xV10°, Max SPL (dB): 130, Connection: XLR, with inbuilt amplifier having output power: 2x1000W, Nominal impedance: 4 ohm, S/N: >95dBA, Damping Factor: >500, Protection: over voltage protection, overload, output protection,clip,limiter. |
| 2 | Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings. Approved Makes: JBL, Promark, QSC, Electrovoice, L Acoustics, d&b Audiotechnik |
| 3 | SITC of 18\\" Active high power subwoofer with built in high dsp processor, frequency response: 35-120hz, Rms power: 1000W, Peak Power: 2000W, Max Spl:135dB, 2 x XLR input, 2 X XLR output, Damping factor: >500, S/N: >95dBA, It has a rigid metal grillebackend by an acoustically transparent foam in plywood cabinet strengthened with a hard wearing scratch-resistant balck polyurea coating. |
| 4 | Supply, installation, testing and commissioning of Active Two-way Small Format high SPL surface mount loudspeaker. The loudspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90 Hz - 18 kHz or better; Nominal Dispersion : 100°H x 100°V; Power handling of 500W peak or more; Sensitivity : 90 dB and the Max SPL : 119dB Peak or better; Nominal impedance of 8 ohms. The loudspeaker system shall be comprised of a Powder-coated finish stainless steel grille with Two-part spray polyurea coating Enclosure;Enclosure Material Exterior-grade plywood, Single 8\\" LF Driver and 1x HF Compression driver with at least 2\\" voice coil; U bracket shall be included.Approved Makes: JBL, Promark, QSC, Electrovoice, L Acoustics, d&b Audiotechnik |
| 5 | SITCof active stage monitor speaker with 12\\" LF, 1.75\\" HF, Frequency response: 55-20K, RMS Power: 600W, Program Power: 1200W, Max SPL: 132dB, Coverage angle: 90 x 70 deg, amplifier module output: 2 x 350W @ 4ohm, S/N: 95dB, Damping Factor: 500@100Hz, with overload protection. |
| 6 | SITC of active speaker with 2 x 6.5\\" woofers, 1.4\\" HF driver, Freq response: 60hz-20khz,Program Power: 400W, RMS Power: 200W, Coverage angle: 60 deg (HXV), Max Spl: 127dB, with inbuilt amplifier having power: 2 x120W, S/N: >95dB, Damping factor: >500. |
| 7 | SITC of 48 channel digital mixing console shall be designed for large-scale professional audio applications, offering high input capacity and flexible control. The system shall feature approximately 33 motorized faders and support up to 48 input mixing channels. It shall provide a minimum of 20 auxiliary buses and 8 DCA groups for advanced signal grouping and control. The console shall include not less than 32 analog microphone/line inputs using XLR/TRS combo connectors, along with at least 2 stereo line inputs (RCA or equivalent). It shall provide a minimum of 16 analog XLR outputs for flexible audio routing. |
| 8 | SITC of 16 x 16 DSP with Frequency Response: 20Hz~20kHz, Sampling Rate: 48kHz,24bit, Dynamic Range: >110dB, THD: ≤0.005%, Latency: 5.8 mS, Crosstalk: ≤-105dB, S/N Ratio: >110dB, Automatic Gain Control (AGC), Adaptive Echo Cancellation (AEC), Adaptive Feedback Cancellation (AFC), It includes a USB2.0 audio interface for recording and playback via a USB drive, Experience exceptional sound quality at 48kHz/24bit, 8 configurable GPIO interfaces, Phantom Power: DC 48±6V,10mA, Input Impedance: 2KΩ balance, Maximum Input Level: 20dBu. |
| 9 | SITC of Dynamic Supercardioid Vocal Microphone with Freq. Response : 35 Hz - 21,000 Hz, Sensitivity : 3 mV/pascal, Dynamic Range:144 dB, Impedance: 350 ohms. |
| 10 | SITCof Dynamic Supercardioid Instrumental Microphone with Freq. Response : 30 Hz - 21,000 Hz, Sensitivity : 3 mV/pascal, Dynamic Range:144 dB, Impedance: 350 ohms. |
| 11 | Supply, Installation, Testing & Commissioning of Wireless Handheld microphone: Frequency response : 20Hz - 20kHz ; Maximum SPL : 154 dB; Total harmonic distortion (THD) : ≤ -60 dB; Transducer Principle type: Dynamic; Polar Pattern : Cardioid; Dynamic range: 134 dB ; System latency: 1.9 ms; RF Power : 10mW; Senstivity : 2.1mV/Pa. Should have : 2,240 selectable frequencies; Should have 56MHz Bandwidth up to 90 channels with included handheld transmitter & receiver. |
| 12 | Supply, Installation, Testing & Commissioning of Wireless Lapel Microphone : Frequency response : 20Hz - 20kHz ; Maximum SPL : 130 dB; Bandwidth: 56MHz; Total harmonic distortion (THD) : ≤ -60 dB; Microphone type: pre-polarized condensor; Polar Pattern : Omnidirectional; Dynamic range: 134 db; Senstivity : 17mV/Pa. Should have : 2,240 selectable frequencies; Should have 56MHz Bandwidth up to 90 channels with included handheld transmitter & receiver. |
| 13 | Supply, Installation, Testing & Commissioning of Wireless Headworn Microphone : Frequency response : 20Hz - 20kHz ; Maximum SPL : 150 dB; Bandwidth: 56MHz; Total harmonic distortion (THD) : ≤ -60 dB; Microphone type: pre-polarized condensor; Polar Pattern : Cardiod; Senstivity : 1.6 mV/Pa. Should have : 2,240 selectable frequencies; Should have 56MHz Bandwidth up to 90 channels with included handheld transmitter & receiver. |
| 14 | Supply, Installation, testing and commissioning of 16 Core Microphone cable length of 100mtr each core will come with 2 core shilded cable included 16 core patch panel plate. |
| 15 | Supply, Installation, Testing & Commissioning of Gooseneck Microphone with Cardioid polar pattern; Frequency Response: 50 Hz to 20 kHz; Max Sound Pressure level: 130 dB; with table stand.Approved Make: Sennheiser/Shure/Clearone/Promark |
| 16 | SITC of Stands and Tripods Type: Microphone Stands, Tubing material: Steel Tubing colour: Black, Tubing surface, Powder coated, Min. height: 1080 mm, Max. height, 1510 mm, Transport length, 1080 mm, Height adjustment: Yes, Base type: Round base, Base material: Cast iron. |
| 17 | Supply Installation testing & Commissioning of Floor Box 4 x XLR (3x IN and 1x OUT) for Connecting Microphone. |
| 18 | SITC of Indoor LED video wall (15.74 H x 27.29 W = 429.54 sq. feet). Module Pixel Pitch 1.538mm, LED Type GOB, Module Resolution (W×H) 208×104=21632 Pixels, Pixel density (pixels/sq.m.) 422500 dot/㎡, Module Size (WxH) W320mm x H160mm, Cabinet Size (WxHxD) 640mm x 480mm x 60mm (With Back Cover), Cabinet Weight 7.8 kg, Maintenance Full front maintenance, Ingress Protection IP30, Planeness ≤0.5mm, Cabinet Material Die-casting Aluminum, Optical Single-dot Brightness Calibration Support, Brightness 600 cd/㎡, Color Temperature 2000K~9300K Adjustable, Beam Angle (Hor/Ver°) 160°/140°, Brightness/Color Uniformity ≥98%, Contrast Ratio 5000:1, Electronic Input Power 488 W/㎡, Input Power 146 W/㎡, Power Supply Input Voltage AC200-240V, Frequency 47-63Hz, Performance Frame Changing Frequency 60Hz, Refresh Rate 3840Hz, Processing Depth 12~14Bit, Video Support 2K, 4K, Environment Life Span 100000hrs, Working Temp/Humidity -20℃~45℃ / 10%~60%RH (No Condensation), Storage Temp/Humidity -20℃~50℃ / 10%~65%RH (No Condensation), Certification: BIS. Including MS framing for video wall. |
| 19 | SSITC of video wall processor. Input Maximum resolution: 4096×2160@60Hz, 4K input interface: 1 x DP 1.2, 1 x HDMI 2.0, 2K input interface: 2 x HDMI 1.4, 2 x DVI, 1 x U-disk interface. Output up to 17.03 million pixels load capacity, 26 x Gigabit Ethernet ports and 3 x 10 Gigabit optical fiber ports (Choose either Ethernet port or optical port). Audio 13.5mm independent input, 13.5mm independent output, supports HDMI & DP audio decoding and output. Function up to 6 windows, supports window overlapping, window roaming and free scaling, with a minimum window size of 64×64, free cropping and seamless switching of video signals; crop box adjustable, with a minimum window size of 64×64, adjusting color gamut with Precise Color Management (requires receiving card support), Genlock synchronization, supporting locking internal Vsync, input source, and automatic Genlock (according to layers), supports brightness and precise color temperature adjustment, supports 3D display (accessories need to be purchased separately), improving grayscale performance with Better Grayscale at Low Brightness, easy saving and loading of 128 preset scenes, supports playback and upgrade via USB drive, supports Bluetooth remote controller (optional), virtual pixel, supports 3x virtual and 4x virtual, supports subtitles. Control USB port for control or cascading, RS232 protocol control, supports LAN port control, supports control via App. |
| 20 | SITC of 55 inch display. CPU ARM Cortex – QuadCore @ 1.0 GHz, Operating Wi-Fi Frequency 2.4 GHz / 5 GHz, RAM / DDR Size Embedded 1.5 GB, Internal Memory (ROM/eMMC) 8 GB, Main Board Type Single (single SMPS), DRM Licensed Yes, Game Optimizer Yes, HDR10 Yes, HLG Yes, ALLM Yes, MEMC Yes, Panel Make CSOT, Surface Treatment Anti-Glare, Panel Type DLED, Panel Grade A+, Panel Power 12 V, Panel Dots Specs 0 Dots, Colour Depth (bits) 1.07G, Screen Size 55″ (3840×2160), Resolution 3840 × 2160, Contrast Ratio (Typical) 5000:01:00, White Luminance 400cd/m²±10% @50-60Hz, Response Time 6.5 ms, Viewing Angle V:178°, H:178°, Aspect Ratio 16:09, Picture Modes Vivid, Standard, APS, Cinema, Cricket, Game_Optimiser, Number of Speakers 2, Speaker Type Open / Box, Audio Output 10W+10W. |
| 21 | SITC of 4K60P 25X Professional PTZ Camera with 25X Optical Zoom Lens,NDI|HX3 Optional, AI Tracking+Auto Framing, Gesture Recognition, SONY 1/1.8-inch high-quality CMOS, video output interfaces, HDMI+USB3.0, Type-B+12G-SDI+LAN , Image Sensor SONY 1/1.8\\" CMOS, Pixels 8.50 Megapixels, 8.29 Effective Megapixels, Scan Mode Line by line, Lens 25X Optical Zoom , f=7.1(W)~171.95mm(T), F1.61~F5.19, Digital Zoom: 16X, Horizontal View Angle 59.2°(W)~2.5°(T), Vertical View Angle 34.6°(W)~1.4°(T), Focus System Auto, Manual, Shutter Speed 1/50s ~ 1/10000s, Minimum Illumination 0.1Lux, Exposure Auto, Manual, Iris Priority, Shutter Priority, Brightness priority, White Balance Auto, Indoor, Outdoor, Keying, Auto Tracking, Backlight Compensation Support, Digital Noise Reduction 2D&3D Digital noise reduction, S/N Ratio ≥50dB, Tilt Angle -30°~+90°, Pan Angle -171°~+171°. |
| 22 | SITC of professional full HD video production and streaming device featuring 4-channel HDMI video inputs and dual HDMI outputs supporting program (PGM), along with USB and IP outputs enabling simultaneous UVC and RTMP/RTMPS streaming. It supports a wide range of input formats including 1080p, 1080i, and 720p, with output up to 1080p60, . The unit integrates 4 HDMI audio inputs, 2-channel 3.5mm microphone inputs, and a 3.5mm headphone monitoring output, It includes a 5.5-inch full HD display, supports 36 transition effects, 8-channel PIP/POP modes, chroma and luma keying, multiple layer management, logo insertion, and real-time playback. The system provides PTZ camera control via VISCA over IP for up to 4 cameras with joystick operation, along with mobile and web-based remote control capabilities. Connectivity includes RJ45 Ethernet (10/100/1000 Mbps), USB Type-C for UVC output, and USB Type-A for storage. The unit operates on 12V DC power with a maximum consumption of 12W, is designed for indoor use within 0°C to 40°C. |
| 23 | SITC of Recorder & Streamer with Professional-quality live streaming to global audiences by any CDN platform. With a low entry threshold, even entry-level, users can quickly get started 1080p recording – features media recording that can be used to record a program and save recordings directly to a connected external hard drive via USB, Intuitive app for preview and program monitoring, change video layout in Full Screen / PBP / PiP settings, adding image and subtitles overlays, and smooth scenes transitions for a professional finish, Compact mixer control panel – switches and mixes between multiple video & audio sources with the help of easily identifi able luminous keys, Video Input: 1 x 4K HDMI Type A Female,2 x HDMI Type A Female, Video Outputs: 1 x 4K Loop-Thru HDMI Type A Female, 1 x PGM HDMI Type A Female, Operating Temperature 0 – 40 ºC, Storage Temperature -20 – 60 ºC. |
| 24 | \\"Supply, installation, testing and commissioning of secured wireless presentation device. It should have an HDMI, output supporting resolution up to 4K, and multiple USB interfaces. Internal users should be able to share content via corporate network, also the device should be able to generate its own built in Wi Fi, network for guest content sharing. User should have option to present content from Mac, desktop or laptop computers using client software or airplay, extension for the Google Chrome™ web browser, or Miracast, screen mirroring technology (Windows, 10 computers only). Present content from Android™ and iOS, mobile devices with the app/Screen mirroring, Device must support two sources on a single screen simultaneously and should have possibility to extend up to eight sources, layout should be configured automatically based on the number of active sources, the type of sources, and their aspect ratios. When no source is connected, device should be able to display a customizable welcome screen on the room display with simple instructions for connecting and presenting. Device should be able to Integrate with Microsoft Exchange Server, (for Outlook, and Microsoft 365, software users), Google Calendar™ room scheduling software which allows the space’s availability and meeting details to appear onscreen. Device should comply to standard network security protocols such as 802.1x network access control, Active Directory, authentication, AES content encryption, 100/1000 Mbps, auto- switching, auto negotiating, auto discovery, full/half duplex, TCP/IP, DHCP, SSL, TLS, SSH, HTTPS, Device should support Wi-FiDual-band 802.11a/b/g/n (2.4 GHz & 5 GHz), Up to 100 ft (30 m)\\" |
| 25 | SITC of Digital Podium with Goseneck Microphone.Type of Chassis/ Frame: Metal cabinet made CRCA MS sheet of 0.7 mm(mini.) with powder coated, lock & key for complete security.Mount Type: Floor Mount with Wheels Display Size/Area (inches): 21.5\\" mchesminimum Multi touch screen or better Display Type: LCD Central Control Panel: Available Optimum Resolution: Full HD 1080p displaywith 1920 x 1080 Resolution or better. Contrast Ratio: 1000:1 (typical), 20,000,000:1(DCR) or better Light Source: 40,000 Hours (min.) or better Viewing Angles: 170°/160° (type) Brightness: 200cd/m2 (typ.) or better Tilt Mechanism: Motorized, Wireless Keyboard and Mouse. with OPS PC 4K OPS with Intel Core i7 or better,10th Gen or better,8GB RAM or better, 256GB SSD or better, Windows 10, Certification: BIS,ISO/IEC 20000-1:2018, Test report, ISO 9001:2015, and ISO 14001:2015 |
| 26 | SITC of 24-Port Gigabit PoE+ Smart Managed Pro Switch (GS728TPPv2) features 24 Gigabit Ethernet ports and 4 SFP ports, with 24 PoE+ (IEEE 802.3at) supported ports. It is Insight Remote/Cloud manageable, including a 1-year Insight subscription, enabling flexible remote monitoring and control. The switch supports up to 16K MAC address entries, 256 VLANs with VLAN routing and dynamic VLAN assignment, along with MLD snooping and 32 static routes, and a host ARP table of 512 entries. The device incorporates Energy Efficient Ethernet (EEE) and DoS prevention for optimized performance and security. It operates on an internal power supply of 100–240 VAC, 50–60 Hz, with a maximum power consumption of 439W. The switch includes 2 cooling fans, producing an acoustic noise level of 33.42 dBA at 25°C, and is designed to function within an operating temperature range of 0°C to 50°C. |
| 27 | Supply, Installation, Testing and Commissioning of Wi-Fi Router with Wifi technology- 802.11a Dual Band Gigabit, Wifi Range-Large homes, Number of ethernet ports- (1 WAN and 4 LAN) Gigabit Ethernet ports with auto-sensing technology. |
| 28 | Supply, Installation, Testing and Commissioning of USB-C to USB-C 3 m (9,84 ft) cable. USB Full Featured Type-C for USB 3.1 Gen 1. |
| 29 | Supply , installation , testing and comissioning of AV Control Processor, should have 1x RS232/RS422/RS485, 2x bidirectional RS232 or more, 2 or more IR/Serial, 4 or more Relay, 4 or more x Digital IO. It can control at least 30 devices over more Ethernet port supporting 10/100/1000Base-T and should support IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTPS, NTP, SFTP, SMTP, SNMP, SSH protocols. Should have SDRAM: Min 1GB or more and Flash Memory: Min 8 GB or more. Optionally, Should have Built-in IR receiver for recording IR commands. Should be Operational in up to 45°C temperature. Should have Regulatory compliance: CE/UL or any equivalent. |
| 30 | Supply , Installation, Testing & Commissioning of Ipad of latest specifications |
| 31 | SITC of transmitter. Extends True 4K HDMI signals over IP by a single Cat 5e/ 6 cable with ultra-low latency, delivers visually lossless high-quality video up to 4096 x 2160 @ 60 Hz (4:4:4), supports HDR 10 with HDCP 2.2 compliant for content protection, supports individual stereo audio and HDMI audio formats including LPCM 7.1CH, Dolby True HD, Dolby Digital Plus, and DTS-HD Master Audio, EDID Expert™ selects the optimum EDID settings for smooth power-up, high-quality display, and the best video resolution across different screens offers different levels of video compression rates including Smooth, Balanced, and High Quality for users to choose from, depending on practical usage. For transmitters – separate stereo audio signals can be embedded into the HDMI stream, for receivers – audio streams can be extracted from the HDMI stream and delivered as a separate audio signal. |
| 32 | SITC of receiver. Extends True 4K HDMI signals over IP by a single Cat 5e/ 6 cable with ultra-low latency, delivers visually lossless high-quality video up to 4096 x 2160 @ 60 Hz (4:4:4), supports HDR 10 with HDCP 2.2 compliant for content protection, supports individual stereo audio and HDMI audio formats including LPCM 7.1CH, Dolby True HD, Dolby Digital Plus, and DTS-HD Master Audio, EDID Expert™ selects the optimum EDID settings for smooth power-up, high-quality display, and the best video resolution across different screens offers different levels of video compression rates including Smooth, Balanced, and High Quality for users to choose from, depending on practical usage. For transmitters – separate stereo audio signals can be embedded into the HDMI stream, for receivers – audio streams can be extracted from the HDMI stream and delivered as a separate audio signal. |
| 33 | Supply and laying of 22 AWG 2 core foil sheilded microphone cable,High Performance: Our microphone cables are made with high-conductivity copper, Withstands Constant Use: Flexible EPDM rubber jackets are built to last, Experience Less Distortion: Cables feature low capacitance. |
| 34 | SITC of HDMI cable with superior video quality – True 4K (4096 x 2160 / 3840 x 2160 @ 60 Hz 4:4:4), HDMI Ethernet Channel functionality: additional dedicated data channel supports networking, HDMI (3D, Deep Color, 4K); HDCP 2.2 compliant. Supports HDR, Gold-plated connectors for reliable transmissions. |
| 35 | Supply and laying of CAT6 Ethernet cable. Meets HDBaseT 3.0 standard for uncompressed multi-signal transmission across 100 m, including True 4K video, audio, Ethernet, power and control, Supports sweep frequency up to 500 MHz,Conductor material: 23 AWG solid bare copper. |
| 36 | Supply of 42U Rack Easy Wall Mount Rack With Lock & Key. Max Loading 60 kgs. 19inch Standard Rack as per DIN 41494 or Equivalent.Convenient Wall mounting with provision for Floor mounting & Table mounting. Cable entry on Top & Bottom cover with rubber cromet Front Toughened Glass Door, Turning angle of front door over 180°. Side ventilated Steel Doors with Lock and Key Back ventilated Removable Panel. Welded Frame, Reliable structure, Material SPCC Quality Cold Rolled Sheet. Please Enable Macros to View BoQ information |