|
| 1 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. |
| 2 | Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed. |
| 3 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering cladding to wall, fixed with self tapping screws as specified. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. |
| 6 | Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified |
| 7 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 25 mm thick complete all specified and directed by engr in charge. |
| 8 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 9 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 10 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering with CM 1:3 on fair faces of brick work or concrete surfaces as in skirting all as specified. |
| 11 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 12 | Material and labour for 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over and including 10mm thick rendering with CM 1:3 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified. |
| 13 | Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc |
| 14 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in cooking platforms in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite all as specified. |
| 15 | M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 16 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed. |
| 17 | M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete all as specified and directed. |
| 18 | Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 19 | M&L for RCC type B1 1:2:4 using 20mm graded aggragate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, chajjas, deck slabs and in shelves and the like complete all specified and directed |
| 20 | M&L TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qual complete all specified and directed |
| 21 | M&L for Mils steel TMT bars 05mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders all as specified and directed.. |
| 22 | Use and waste of flat fair finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work ; not exceeding 200mm thick (Horizontal or sloping) as specified |
| 23 | Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 24 | M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 25 | M & L for 15 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 26 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer. complete all as specified and directed. |
| 27 | Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali resistant primer complete all as specified and directed. |
| 28 | Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets complete all as specified and directed. |
| 29 | S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces complete all as specified and directed. |
| 30 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces complete all as specified and directed. |
| 31 | M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation complete all as specified and directed. |
| 32 | M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm. complete all as specified and directed. |
| 33 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 34 | Supply and fix 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd) as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed |
| 35 | M & F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 36 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 37 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 38 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm |
| 39 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 40 | S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed. |
| 41 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed |
| 42 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 43 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 44 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 45 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 46 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 47 | S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed |
| 48 | S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed |
| 49 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 50 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 51 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 52 | S&F in repair pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece complete all as specified and directed. |
| 53 | S&F in repair PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed” |
| 54 | M&L for power coated anodised aluminium frame for doors, windows, ventilatores with one or more rebated including joiing cleat for fixing etc complete all as specified and direcyed |
| 55 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash barsaluminium section weighing 0.55 kg/m including necessary joining cleats, glzing clips,rubber packing,anodised aluminium snap beading,screws etc and power coating of any colour(thickness of powder coating not less than 50 micron.) complete all as specified. |
| 56 | M & L for 4.80 mm Sheet glass, ordinary quality and glazing with aluminium clip and beading in square exc 0.5 sq. m in each panel complete all as specified and directed. |
| 57 | S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
| 58 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 59 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each panel complete all as specified and directed. |
| 60 | S&F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each panel complete all as specified and directed. |
| 61 | Dismatling of mild steel work any description |
| 62 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified and directed. |
| 63 | M & L for Preparation of new or previously untreated steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed. |
| 64 | Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings. |
| 65 | S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls |
| 66 | S&F in rep PVC (SWR) bends any radius, bend 110mm dia with access door |
| 67 | S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches,wall or in floors. |
| 68 | S&F in repair PVC bends any radius 75mm bore |
| 69 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 70 | S&F in repair Grating doom 125mm dia with and without wast hole PTMT (Minimum weight 40 grms) |
| 71 | S&F in repair Grating doom 100mm dia with and without wast hole PTMT (Minimum weight 40 grms) |
| 72 | S&F in repair 32mm PVC waste pipe for kitchen sink ,WHB complete all as specified and directed. |
| 73 | S&F in repair PVC (SWR) WC connector 110mm dia complete all as specified and directed. |
| 74 | S&F in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest complete all as specified and directed. |
| 75 | S7F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete all as specified and directed. |
| 76 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed. |
| 77 | S&F in repair vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. |
| 78 | S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 79 | S&F in repair sinks made of stainless steel with drainage board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 80 | S&F Vitreous china urinals, bowl type 465x355x265 mm white, providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 81 | S & F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 82 | S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 83 | S&F in repairs of Waste fittings 32 mm dia, brass, CP for glazed ware sink, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 84 | S&F in repair CP towel ring of PTMT fixed with chromium plated brass screws (Min wt 90 gms) |
| 85 | S&F in repair soap dish, any type, fiexd to plugs with chromium plated brass screws |
| 86 | S&F CP towel rail 600mm long of PTMT fixed with chromium plated brass screws (Min wt 190 gms) |
| 87 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 88 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store. |
| 89 | Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store. |
| 90 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 91 | S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 92 | S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 93 | S & F in repair 20mm ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified. |
| 94 | S&F in repair 20mm Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed complete all as specified and directed. |
| 95 | S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 96 | Supply and fix in rep 15mm Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 97 | S&F in repair 15mm brass CP mixer for mixing hot and cold water (wall mixer) screwed down for iron pipe andd fixed in repairs for bath shower and kichen sink with complete all as specified and directed. |
| 98 | S&F in repair 15 mm brass CP basin mixer unit with all fittings required complete all as specified and directed. |
| 99 | S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 100 | S& F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 101 | Taking up or down 15 mm bore steel water tubing and connections including clfor refixing or removal to store |
| 102 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. |
| 103 | Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store |
| 104 | S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 105 | Supply & Fixing in repair 3-layer PP-R Polypropylene random copolymer) concealed pipes of 20 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leakproof all as specified and as directed. |
| 106 | Supply & Fixing in repair 3-layer PP-R Polypropylene random copolymer) concealed pipes of 16 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leakproof all as specified and as directed. |
| 107 | M & L for 100 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 108 | M & L Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & pattern over and including 50mm thick compactedbed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand complete all as specified . |
| 109 | M&L Chequered cement concrete tiles 20cmx20cmx25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors completed all as specified and directed by Engr-in-Charge. |
| 110 | Disconnecting existing water tanks of capacity exc 250 ltrs but n exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc complete all as specified and directed. |
| 111 | Disconnecting existing water tanks of capacity exc 500 ltrs but n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc complete all as specified and directed. Please Enable Macros to View BoQ information |
