Rate Contract For The Supply Of Capital Spares- Tungsten Carbide T Ing Tools (Tctt) For Ir Track Machines. , Set Of Tungsten Carbide Tamping Tools (Tctt) For Csm/Duomatic (Old Model) As Per R Dso Technical Specification No: Tm/Hm/6/320 ( Rev-3).Each Set C, Secunderabad-Telangana
TDR : 55248768
Tender Notice
BOQ
8 Days Left
Secunderabad
Telangana
Rate Contract For The Supply Of Capital Spares- Tungsten Carbide T Ing Tools (Tctt) For Ir Track Machines. , Set Of Tungsten Carbide Tamping Tools (Tctt) For Csm/Duomatic (Old Model) As Per R Dso Technical Specification No: Tm/Hm/6/320 ( Rev-3).Each Set C
Set of Tungsten Carbide Tamping Tools (TCTT) for CSM/Duomatic (Old Model) as per R DSO Technical specification No: TM/HM/6/320 ( Rev-3).EACH SET CONSIST OF FOLLOWING FOUR TYP E OF TAMPING TOOL SET. 1) TAMPING TOOL (TYPE-I) DRG OF TOOL: RDSO/TM/14A/16 QTY.=16NOS/S ET 2)TAMPING TOOL (TYPE-II) DRG OF TOOL : RDSO/TM/14B/16 ,QTY= 4 NOS/SET 3)TAMPING TOOL(T YPE-III) DRG OF TOOL : RDSO/TM/14C/16 ,QTY= 4 NOS/SET) 4)TAMPING TOOL(TYPE-IV), DRG OF TOOL : RDSO/TM/14D/16 ,QTY= 8 NOS/SET, TOTAL TAMPING TOOL IN A SET IS 32 NOS [ Rate of supply 97 units per Year , Commencement Time Allowed -1 Day ]
2
Set of Tungsten Carbide Tamping Tools (TCTT) for New CSM/Duomatic (New Model) as per Plasser Part no. 1) .CU30.10840 FR I and RDSO Drawing No. RDSO/TM/15A/16=08 no's, 2) CU30.1 0840 FR II and RDSO Drawing No.RDSO/TM/15B/16=08 no's 3) CU30.10840 FR III and RDSO Drawing No. RDSO/TM/15C/16=08 no's, 4)CU30.10840 FR IV and RDSO Drawing No. RDSO/TM/15D/16=08 no' s Total no. of tools: 32 & RDSO Technical specification No: TM/HM/6/320 (Rev-3) [ Rate of supply 61 units per Year , Commencement Time Allowed -1 Day ]
3
Set of Tungsten Carbide Tamping Tools (TCTT) for Tamping express (09-3X)/ Dy.expres s as per Plasser Part no. 1) CU30.10840 FR I and RDSO Drawing No.RDSO/TM/15A/16=32 nos,2)CU30 .10840 FR V and RDSO Drawing No.RDSO/TM/15E/16=16 nos, Total no.of tools : 48 and RDSO Specifi cation no.TM/HM/6/320(Rev-3, July2019) [ Rate of supply 73 units per Year , Commencement Time Allowed -1 Day ]
4
Set of Tungsten Carbide Tamping Tools (TCTT) for UNIMAT -2S & UNIMAT-3S as per RD SO Technical specification No: TM/HM/6/320 ( Rev-3). Each set consists of 1) Small Tamping tool as p er Plasser part No. W37.1320=08 no's and RDSO Drawing No. rDSO/TM/01A/16,2) Big Tamping tool a s per Plasser part no.2W31.41B=08 no's and RDSO Drawing No.RDSO/TM/01C/16. (Total no.of tools : 16) [ Rate of supply 46 units per Year , Commencement Time Allowed -1 Day ]
5
Set of Tungsten Carbide Tamping Tools (TCTT) for UNIMAT -4S as per RDSO Technical specification No: TM/HM/6/320 ( Rev-3). One set consists of 1) Big Tamping tool as per Plasser part n o.CU30.6820BE and RDSO Drawing No. RDSO/TM/01A/16=08 no's, 2) Small Tamping tool as per Plass er part no. CU30.6220BE and RDSO Drawing No. RDSO/TM/01B/16=08 no's. Total no of Tools - 16no's [ Rate of supply 41 units per Year , Commencement Time Allowed -1 Day ]
6
Set of Tungsten Carbide Tamping Tools (TCTT) for MFI as per RDSO Technical specifica tion No: TM/HM/6/320 ( Rev-3). one set consists of 1)Tamping tool as per Plasser part no. CU30.1084 0 FR I and RDSO Drawing No. RDSO/TM/15A/16=08nos, 2) Tamping tool as per Plasser part no.CU30. 6840 FR I and RDSO Drawing No. RDSO/TM/01A/16=04nos, 3) Tamping tool as per Plasser part no. C U30.2743 FR I and RDSO Drawing No. RDSO/TM/01B/16=04 [ Rate of supply 145 units per Year , Commencement Time Allowed -1 Day ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
