|
| 1 | Aluminium flat size 75x6x2000 |
| 2 | Argon torch set with flow meter & regulator length 8mtr, ampere – 250, make- Ador |
| 3 | Buffering wheel for AG 4 grinder, make- Bosch/Carborundum |
| 4 | Bush for RAV coupling as per drg. No. BLR- 216/16 |
| 5 | Ceramic wool cerablanket AC-2, blanket size – 610x7600mm, thickness- 25mm, density- 64Kg/m³ |
| 6 | Dust free cotton waste, Good quality (White) |
| 7 | Cutting wheel 7”, Make- Bosch/Carborundum |
| 8 | Cutting wheel AG- 4”, Make- Bosch/Carborundum |
| 9 | Emery cloth fine, Make- Bosch/Carborundum |
| 10 | Emery cloth rough, Make- Bosch/Carborundum |
| 11 | Emery paste rough (Each packet of one kg), Make- Carborandum |
| 12 | Flexible shaft 19mm x15 mtr long for boiler |
| 13 | Graphite packing 14mm |
| 14 | Graphite packing (gland packing N/M) 6mm (¼”) |
| 15 | Graphite packing (gland packing) matalic 8mm |
| 16 | Graphite packing ½” 12mm |
| 17 | Graphite packing 3mm |
| 18 | Graphite packing ¾” 19mm |
| 19 | Graphite packing 3/8” 10mm |
| 20 | Graphite packing 5/8” 16mm |
| 21 | Grinding disc (wheel) for AG 4 grinder, Make- Bosch/Carborundum |
| 22 | Grinding wheel 12” (300x40x40mm), Make- Bosch/Carborundum |
| 23 | Grinding wheel for AG 7 angle grinder, Make- Bosch/Carborundum |
| 24 | HP steam joint 1/8” non metallic, make- Uniklinger |
| 25 | High pressure metallic joint sheet size 3mm thk. Model- klingerit-1000/UKL1000, make- Uniklinger |
| 26 | High speed steel hand hacksaw blade |
| 27 | HT bolt 12x40mm full thread, make- Unbrako |
| 28 | HT bolt 7/8” x 4” F.T/H.T full thread |
| 29 | HT bolt with nut 12x50 full thread, make- Unbrako |
| 30 | HT hex head bolt with nut 12x65mm full thread, make- Unbrako |
| 31 | LP steam joint 1/16” (1.5mm), make- Uniklinger |
| 32 | LP steam joint 1/32” (0.8mm) make- Uniklinger |
| 33 | LP steam joint 1/8” (3mm) non metallic, make- Uniklinger |
| 34 | High pressure metallic joint sheet size- 3mm thk model- Klingerit-1000/UKL1000, make- Uniklinger |
| 35 | M. S. washer I.D- 17mm, O.D- 30mm, Thk- 3mm |
| 36 | Oil seal 150x175x37, make- Mykoda |
| 37 | Oil seal 30x45x7, make- Mykoda |
| 38 | Oil seal 35x40x8, make- Mykoda |
| 39 | Oil seal 50x52x7, make- Mykoda |
| 40 | Oil seal 50x68x8, make- Mykoda |
| 41 | Oil seal 65x90x10, make- Mykoda |
| 42 | Old dhoti length- 4mtr, Good quality |
| 43 | Rustolene (500ml) pack |
| 44 | S. S. stud 12x100mm thread length |
| 45 | S. S. stud 12x100mm thread length length 50mm |
| 46 | Square washer 75x75x5mm hole size 16mm, material S S. |
| 47 | S. S. bolt 10x25mm full thread, make- Unbrako |
| 48 | Steam hose 2W size- 1” (25mm) inner tube- black EPDM, reinforcement : Double wire braded high tensile steel wire, EPDM outer colour – Red, make- Indo- Maksson |
| 49 | Brasso (01 pkt = 500g) |
| 50 | Coupling pin with rubber bush as per sample for cooling tower pump |
| 51 | DP Test Kit 96 for turbine rotor |
| 52 | DP test kit 97 for turbine |
| 53 | DP test kit 98 for turbine |
| 54 | Glazing spray for turbine rotor, molykote |
| 55 | Old dhoti size – 1mtr x 4mtr |
| 56 | Restolene oil |
| 57 | Teflon rod Dia – 3” length- 1 ft. |
| 58 | Teflon rod Dia- 8”, length- 1 ft. Please Enable Macros to View BoQ information |
