|
| 1 | Supply, Installation, Testing and Commissioning of FOH Line Array Loudspeaker System. The loud speaker array module shall comprise two-way passive/bi-amp line array modules with single 12-inch LF transducer having minimum 2-inch voice coil or better and HF compression driver(s) with minimum 2 × 1.4-inch voice coil or better.(Please refer DNIT for complete specification of item no.1) |
| 2 | Supply, Installation, Testing and Commissioning of OEM supplied Array Frame for Line Array Speakers. The array frame shall be manufactured by the respective OEM and specifically designed for compatible line array speaker models. The frame shall be constructed of high-strength aluminium alloy and shall be suitable for safe suspension and support of the specified line array system. (Please refer DNIT for complete specification of item no.2) |
| 3 | Supply, Installation, Testing and Commissioning of Passive Subwoofer in bass reflex enclosure. The subwoofer shall be equipped with a single 18-inch low frequency transducer having minimum 4-inch voice coil and shall be housed in a heavy-duty bass reflex enclosure constructed of high-quality plywood with durable textured finish and perforated steel grille. (Please refer DNIT for complete specification of item no.3) |
| 4 | Supply, Installation, Testing and Commissioning of 10-inch or better full range, 2-way passive loudspeaker. The loudspeaker shall have frequency range (-10 dB) of 50 Hz – 18 kHz or better, power handling capacity of 300 W or higher, sensitivity of 95 dB or better, and maximum peak SPL of 126 dB or more.(Please refer DNIT for complete specification of item no.4) |
| 5 | Supply, Installation, Testing and Commissioning of 10-inch or better two-way active Stage Monitor Loudspeaker. The loudspeaker shall be an active design with inbuilt Class-D amplifier module rated at minimum 1000 Watts peak power or better.(Please refer DNIT for complete specification of item no.5) |
| 6 | Supply, Installation, Testing and Commissioning of high-performance 2-way surface-mount loudspeaker. The loudspeaker shall feature a 5-inch or larger weather-treated paper cone woofer with minimum 1.5-inch voice coil and a 1-inch silk dome tweeter mounted on a horn-loaded design. (Please refer DNIT for complete specification of item no.6) |
| 7 | Supply, Installation, Testing and Commissioning of Quad Channel Class-D Network Amplifier. The amplifier shall be a four-channel Class-D design with total power output of 8000 Watts or better, capable of asymmetrical power distribution across all channels. Each channel shall independently support 16Ω, 8Ω, 4Ω, 70V and 100V operation. (Please refer DNIT for complete specification of item no.7) |
| 8 | Supply, Installation, Testing and Commissioning of 8 Channel Class-D Network Power Amplifier. The amplifier shall be an eight-channel Class-D design with total power output of 4000 Watts or better, capable of asymmetrical power distribution across all channels. Each channel shall independently support 16Ω, 8Ω, 4Ω, 70V and 100V operation. (Please refer DNIT for complete specification of item no.8) |
| 9 | Supply, Installation, Testing and Commissioning of compact Audio, Video and Control (AV&C) Processor. The processor shall feature Intel 64-bit CPU architecture with 32-bit floating-point audio processing. It shall support minimum 64×64 Q-LAN audio channels and 32×32 Dante channels (expandable), along with minimum 8 onboard Acoustic Echo Cancellation (AEC) channels. The unit shall provide eight flexible analog input/output channels with 24-bit conversion at 48 kHz sampling rate, THD less than 0.001%, dynamic range greater than 109 dB, and +48V phantom power support on inputs. The outputs shall provide up to +20 dBu with maximum 0.005% THD or better. (Please refer DNIT for complete specification of item no.9) |
| 10 | Supply, Installation, Testing and Commissioning of 32 Channel Touch Screen Digital Mixer. The mixer shall be provided with minimum 10-inch color TFT touch screen display and shall support minimum 32 input channels comprising at least 24 Mic/Line inputs and 6 Line inputs. It shall include stereo USB/MP3 playback facility and provide input processing with 4-band fully parametric EQ, gate and compressor on all input channels. (Please refer DNIT for complete specification of item no.10) |
| 11 | Supply, Installation, Testing and Commissioning of Gooseneck Microphone. The microphone shall be a pre-polarised condenser type with cardioid or better polar pattern and shall have a frequency response of 50 Hz to 20 kHz. (Please refer DNIT for complete specification of item no.11) |
| 12 | Supply, Installation, Testing and Commissioning of Digital Wireless Lapel Microphone. The microphone shall consist of a digital wireless bodypack transmitter with omnidirectional or better polarity pattern lapel microphone. The operating frequency range shall be 471–797 MHz or better, with switching bandwidth up to 56 MHz or higher and minimum 2240 selectable frequencies to allow fine tuning. (Please refer DNIT for complete specification of item no.12) |
| 13 | Supply, Installation, Testing and Commissioning of Wireless Headset Microphone. The Microphone shall be suitable for active presenters and performers and shall comprise receiver, bodypack transmitter and ME 3-II cardioid condenser headset microphone capable of handling maximum SPL of 150 dB or more. (Please refer DNIT for complete specification of item no.13)) |
| 14 | Supply, Installation, Testing & Commissioning of Digital Wireless Handheld Microphone with cardioid polar pattern, operating frequency range 471–797 MHz or better, ≤ –60 dB THD, 56 MHz switching bandwidth, minimum 2240 selectable frequencies, 600 kHz tuning grid enabling up to 90 simultaneous channels, sensitivity 2.1 mV/Pa or better, 150 dB SPL or higher, RF output ≥10 mW, minimum 8 hours operating time,(Please refer DNIT for complete specification of item no.14) |
| 15 | Supply, Installation, Testing & Commissioning of Vocal Stage Microphone having balanced frequency response 40 Hz–16 kHz, high SPL handling with excellent feedback rejection, shock-mounted capsule for reduced handling noise, hum-compensating coil, and consistent off-axis response. (Please refer DNIT for complete specification of item no.15) |
| 16 | Supply, Installation, Testing & Commissioning of Super-Cardioid Condenser Microphone suitable for instrument miking (drum overheads and percussion), having frequency response 40 Hz–20 kHz, maximum SPL handling up to 139 dB, medium sensitivity for reduced bleed,(Please refer DNIT for complete specification of item no.16) |
| 17 | Supply, Installation, Testing & Commissioning of Digital Interactive Podium with metallic frame and wooden top, comprising 21-inch Full HD (1920×1080) IPS LCD interactive display (Electromagnetic + Capacitive) with whiteboard facility and pressure-sensitive cordless pen, motorized tilting panel, gooseneck microphone with ON/OFF and mute, keyboard tray,(Please refer DNIT for complete specification of item no.17) |
| 18 | Supply, Installation, Testing & Commissioning of HDMI Transmitter with HDMI input and HDBaseT output, supporting RS-232 and IR control, capable of 4K resolution up to 4096 × 2160 @ 60 Hz (4:4:4), 8-bit with HDR10, HDR10+ and Dolby Vision up to 10 Gbps. (Please refer DNIT for complete specification of item no.18) |
| 19 | Supply, Installation, Testing & Commissioning of HDMI Receiver with HDMI output and HDBaseT input, supporting RS-232 and IR control ports, capable of 4K resolution up to 4096 × 2160 @ 60 Hz (4:4:4), 8-bit with HDR10, HDR10+ and Dolby Vision up to 10 Gbps. The receiver shall support HDMI 2.0a and HDCP 2.2, transmission(Please refer DNIT for complete specification of item no.19) |
| 20 | Supply, Installation, Testing & Commissioning of 8×8 HDMI Matrix Switcher supporting HDMI 2.0, 4K@60Hz (4:4:4) resolution, HDR, and HDCP 2.2. The switcher shall provide auto down-scaling, independent EDID management, and analog as well as digital audio outputs, suitable for high-resolution video distribution and advanced audio routing, complete with all required accessories and installation as directed by the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.20) |
| 21 | Supply, Installation, Testing & Commissioning of AV Wall Plate with Multi-Format Twisted Pair Transmitter having auto switching between inputs, with 1× DisplayPort/USB-C and 1× HDMI input, and 1× HDBaseT output on RJ-45 port. The unit shall support resolution up to 4K@60Hz, data rate up to 10.2 Gbps, and signal transmission distance (Please refer DNIT for complete specification of item no.21) |
| 22 | Supply, Installation, Testing & Commissioning of 65-inch 4K Professional Display with IPS panel, 440 nits brightness, 16GB internal memory, and integrated Wi-Fi. (Please refer DNIT for complete specification of item no.22) |
| 23 | Supply, Installation, Testing & Commissioning of 55-inch 4K Professional Display with IPS panel and 440 nits brightness for clear and vivid visuals. (Please refer DNIT for complete specification of item no.23) |
| 24 | Supply, Installation, Testing & Commissioning of 42/43-inch 4K Professional Display for AVSI & Digital Signage applications with 3840×2160 (16:9) resolution, narrow bezel symmetrical slim design, dynamic crystal color, and intelligent UHD up-scaling. The display shall have 4000:1 contrast ratio, 8 ms response time, EDGE LED backlight, HDR+ support, and haze coating for improved visibility.(Please refer DNIT for complete specification of item no.24) |
| 25 | Supply, Installation, Testing & Commissioning of 24U Equipment Rack for mounting of network/AV switches, complete with cooling fan, power strip/PDU, hardware mounting kit, and all required accessories, suitable for proper cable management and equipment installation, complete in all respects to the satisfaction of the Engineer-in-Charge.Make: Netrack / Rittal / Valrack only.(Please refer DNIT for complete specification of item no.25) |
| 26 | Supply, Laying, Testing & Commissioning of Microphone Cable 23/0.76 mm ATC PVC sheathed, suitable for audio signal transmission in sound systems, complete with all necessary accessories and proper termination as required at site, to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.26) |
| 27 | Supply, Laying, Testing & Commissioning of Speaker Cable 2 Core × 2.5 sq.mm, stranded ETP high-conductivity copper conductors, fire-retardant PVC insulation, parallel type with one core tinned and one core bare, complete with installation, termination and all required accessories as per site requirement, to the satisfaction of the Engineer-in-Charge..(Please refer DNIT for complete specification of item no.27) |
| 28 | Supply, Laying, Testing & Commissioning of Speaker Cable 2 Core × 4 sq.mm, stranded ETP high-conductivity copper conductors, fire-retardant PVC insulation, parallel type with one core tinned and one core bare, complete with installation, termination and all required accessories as per site requirement, to the satisfaction of the Engineer-in-Charge..(Please refer DNIT for complete specification of item no.28) |
| 29 | Supply, Installation, Testing & Commissioning of HDMI Cable 1.8 mtr HDMI Male (M) to HDMI Male (M) with 28 AWG copper conductor, supporting 4K/UHD resolution @ 60 Hz (4:4:4) or better, with gold-plated connectors, complete with installation and all required accessories to the satisfaction of the Engineer-in-Charge..(Please refer DNIT for complete specification of item no.29) |
| 30 | Supply, Installation, Testing & Commissioning of HDMI Cable 5.0 mtr HDMI Male (M) to HDMI Male (M) with 28 AWG copper conductor, supporting 4K/UHD resolution @ 60 Hz (4:4:4) or better, with gold-plated connectors, complete with installation and all required accessories to the satisfaction of the Engineer-in-Charge..(Please refer DNIT for complete specification of item no.30) |
| 31 | Supply, Laying, Testing & Commissioning of High-Speed USB Cable 6 feet length, USB Type-A to USB Type-B, suitable for data transmission between AV equipment, complete with installation and all required accessories to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.31) |
| 32 | Supply, Laying, Testing & Commissioning of SuperSpeed USB 3.0 Cable USB Type-A Male to USB Type-B Male, suitable for high-performance connection between computers and peripherals such as printers, scanners, and cameras, supporting data transfer rates up to 4.8 Gbps and backward compatible with USB 1.0, 1.1, and 2.0 standards, complete with installation and all required accessories to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.32) |
| 33 | Supply, Laying, Testing & Commissioning of USB-C to USB-C Cable (USB 3.2 Gen-2 Active Optical Hybrid) supporting 4K@60 video, data transfer rates up to 10 Gbps, USB 2.0 compatibility, and power delivery up to 100 W (5A, 20V) over a single cable. The cable shall have reversible USB-C connectors with secure locking mechanism, be plug-and-play compatible with PC, Mac and mobile devices, backward compatible with USB 1.0 to 3.0, and RoHS & REACH compliant, complete with installation and all required accessories to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.33) |
| 34 | Supply, Installation, testing and commissioning of Indoor video wall of 2.5 mm pixel pitch. The job includes the cost of testing and commissioning and making connection with each other, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. (Please refer DNIT for complete specification of item no.34) |
| 35 | Supply, Installation, testing and commissioning of High performance LED Video wall Controller of having following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. (Please refer DNIT for complete specification of item no.35) |
| 36 | Supply, Installation, testing and commissioning of display media player of following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. (Please refer DNIT for complete specification of item no.36) |
| 37 | Supply, Installation, testing and commissioning of Content Management System (CMS) Software of following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. (Please refer DNIT for complete specification of item no.37) |
| 38 | Supply and erection of wall-mounted structure for LED screen made of 40 mm × 40 mm × 5 mm thick MS angle iron, fixed on the existing wall with suitable MS fasteners, including painting, labour and all petty materials required to complete the work to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.38) |
| 39 | Supply, Installation, testing and commissioning of desktop PC, of following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-Charge. (Please refer DNIT for complete specification of item no.39) |
| 40 | Supply, Installation, testing and commissioning 8 Port PoE switch, of following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. (Please refer DNIT for complete specification of item no.40) |
| 41 | Supply, Installation, testing and commissioning 12 port fiber LIU, of following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. (Please refer DNIT for complete specification of item no.41) |
| 42 | Supply, Installation, testing and commissioning Indoor type power distribution unit features a front door with 2 hinges, of following specification. The job includes the cost of testing and commissioning, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge. The make should be Delta or its equivalent.(Please refer DNIT for complete specification of item no.42) |
| 43 | Supply, Installation, Testing & Commissioning of 3C × 4 sqmm Copper Conductor PVC Insulated Cable (FRLS) to be laid on the existing cable tray or clamped on wall/surface with suitable saddles at intervals not exceeding 450 mm, including glanding of cable with single compression brass glands, providing 4 sqmm copper lugs, dressing and termination at both ends, complete in all respects as required and to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.43) |
| 44 | Supply, Installation, Testing & Commissioning of 2C × 2.5 sqmm Copper Conductor PVC Insulated FRLS Cable laid on the existing cable tray or clamped on wall/surface at intervals not exceeding 450 mm, including glanding with single compression brass glands, providing 2.5 sqmm copper lugs, dressing and termination at both ends, complete in all respects as required and to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.44) |
| 45 | 9U INDOOR RACK:Supply, Installation, Testing & Commissioning of 9U Indoor Rack with pole mount bracket, side cooling fan with air perforation, and waterproof design, IP-55 certified suitable for outdoor environment, complete with 3-socket PDU, mounting hardware and all required accessories, to the satisfaction of the Engineer-in-Charge.(Please refer DNIT for complete specification of item no.45) |
| 46 | DSR item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 47 | 25 mm |
| 48 | DSR item No. 39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range: -5° to +60°C. Bending Radius: < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force: 11.5Kg etc. complete as required. |
| 49 | 1 Run of cable |
| 50 | Providing comprehensive AMC for 5 years (after expiry of defect liability period i.e. 1 year) for the various components as under including all part of hardware as well as software. (Please refer DNIT for complete specification of item no.48) |
| 51 | 2nd year |
| 52 | 3rd year |
| 53 | 4th year |
| 54 | 5th year Please Enable Macros to View BoQ information |
