|
| 1 | Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed. |
| 2 | Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and as directed. |
| 3 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ 150) as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed |
| 4 | S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed |
| 5 | Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed. |
| 6 | M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 all as specified and directed. |
| 7 | Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed. |
| 8 | M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces of brick work, finishing the surfaces fair and even complete all as specified and directed. |
| 9 | M&L for 10 mm thick rendering in CM 1:4 to vertical surface complete all as specified and directed. |
| 10 | M&L for 15 mm thick rendering CM (1:4) with WPC @ 3% by weight of cement finished even and smooth with additional thickness is provided as floating /setting coat in vertical surfaces all as specified and directed. (NOTE- WPC shall be measured and paid seperately) |
| 11 | Supply only WPC complete all as spd |
| 12 | M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete. |
| 13 | M&L for providing and applying minimum 2 mm thick wall care putty over prepared surface (old and new plastered surface) and rubbing it with sand paper to achieve the surface even and smooth for further application of finishes complete all as specified and directed. (Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height complete all as specified and directed) |
| 14 | M&L for applying one coat of oil bound distemper to old decorated surface of wall including preparation of surfaces complete |
| 15 | M&L for preparation of old decorated plastered or unplastered surfaces of walls incl cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed. |
| 16 | M&L for preparation of old plastered surfaces & applying a layer of Birla putty on wall surfaces including cornics etc for proper levelling of plaster and two coat of oil emulision paint complete all as specified and directed. |
| 17 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work. |
| 18 | Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 19 | Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed. |
| 20 | Supply & fixing PVC 8 to 9mm thick hollow PVC wall/ ceiling panelling including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturer s instruction , make as approved by GE complete all as specified and directed. |
| 21 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. |
| 22 | M&L for Nominal mix RCC 1:2:4 type B-1, Slab supported on walls,beams and columns in floors,roof, landing, balconies,in type B1(20mm graded aggregate). |
| 23 | Formwork to sides of concrete foundatios, footings, bases of columns ,raft and raft beam , side and soffits(if any) of foundation and plinth beams and similar work; verticle or to batter and rough finished surfaces of concrete flat complete all as specified and directed. |
| 24 | M & L for mild steel TMT bars ,10mm dia and over, cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and bonding with (annealed) not less than 0.90 mm dia all a specified and directed |
| 25 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 26 | -ditto- all as per item no. 24 here in before but of any description and in any position not other wise specifically provided for complete all as specified and directed. |
| 27 | M&L for cement concrete 1:4:8 type D-2 (using 20mm graded stone agg) as in foundation , filling and mass concrete complete all as specified and directed. |
| 28 | M&L 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub-floor, sub-base, paving and flooring complete all as spd |
| 29 | M&L for Surface channel in concrete 1:3:6 (40 mm graded aggregate) for drain complete all as specified and directed. |
| 30 | Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as pecified and directed. concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.All as specified and directed. |
| 31 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels wit |
| 32 | M&L chequered concrete concrete tile 20cm x 20cm x 25 mm thick with white cement & pigment, set, jointed and pointed in neat cement slurry in floors, laid over 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed. |
| 33 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 34 | M&L PCC 1:3:6 ,type C1 using 20mm graded stone aggregate as in copings, bed plates etc.,, including necessary form work complete |
| 35 | Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed. |
| 36 | S&F framed work such as gate, grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165. |
| 37 | M&L for applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete. |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 39 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 40 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 41 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 42 | -ditto- all as per item ser No 41 above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 43 | M&L Vitrified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm but over screed bed or bedding layer 10mm thick 1:4 on vertical surfaces/skirting complete all as specified and as directed |
| 44 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and directed by Engineer in charge. |
| 45 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 46 | Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 47 | M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 48 | M&L for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 49 | S&F in repair 15mm dia bib tap long body CP, screwed for iron pipes complete all as specified and directed |
| 50 | S&F in repair angle cock 15 mm bore brass chromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface |
| 51 | S&F repair pillar taps 15 mm bore, brass chromium plated , screwed down high pressure with or without letter Hot or Cold with long screwed shanks and fly nut complete all as specified, fixed in repairs. |
| 52 | S&F in repair bib tap standard of PTMT (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath fitting), any colour, screwed foriron pipe 15 mm bore pipe (minimum weight 90 gm) all as specified, fixed in repairs (Make : Prayag or Equivelent as approved) |
| 53 | S&F in repair polymer white (polypropeylene Delrin and ABS) low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete, complete all as specified and directed. |
| 54 | S&F in repairs, 550x400mm vitreous China, wash hand basin , flat back with pedestal excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste coupling complete all as specified and directed. |
| 55 | S&F in repair vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete including making good to floor complete all as specified and directed fixed in repairs. |
| 56 | Dismantling water tanks 500 ltrs capacity complete all as specified and directed. |
| 57 | Dismantling water tanks of any description, capacity exceeding 500 litres but not exceeding 1000 liters complete. |
| 58 | S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag complete all as specified and directed. |
| 59 | S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag complete all as specified and directed. |
| 60 | S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe and fixed in repairs (min weight 210 gm). |
| 61 | S&F in repair 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe and fixed in repairs (min weight 210 gm). |
| 62 | Supply and fixing in repair PVC Water Tank top cover with spike / without spikes suitable for 500/1000 ltr capacity incl necessary locking pin, locking devices complete fixed to existing tank complete all as specified and as directed. |
| 63 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar to dwarf wall or including fixing cautilever brack etc and connecting union to pipe over all size 915mmx460mm bowl size 405mm x 354mm x 178mm as approved by GEcomplete all as specified and directed. |
| 64 | S&F in repair PVC WHB waste pipe 32/40 mm dia compolete all as spd |
| 65 | S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . |
| 66 | S&F repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 67 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each.& removing to or from store all as specifed & directed. |
| 68 | Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 69 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each |
| 70 | M&L prelam particle board 18/19mm exterior grade prelaminated one side with decorative choice and other side balancing white fixed with screw to timber frame work in cup board complete all as spd |
| 71 | S&F Pressed steel frames for doors of size 125 x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, as per direction of Engineer-in-Charge |
| 72 | S&F Pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, suppcomplete all as specified and directedlied and fixed |
| 73 | M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 74 | S&F 30 mm thick flush shutter, solid core construction with block board core and plywood face panels both face is covered with decorative face veneered with lipping/frame to match fixed to chowkhat complete all as specified and directed |
| 75 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., edges of framing plain, chamfered complete all as specified and directed. |
| 76 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 77 | Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 78 | Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 79 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube all as specified. |
| 80 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8.2.1 B.of SSR Part-II 2004 all as specified and directed. |
| 81 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 82 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified. |
| 83 | S& F Sheet glass 4.8mm thick tinted glass and glazing in squares complete all as specified and directed. |
| 84 | Supply & fixing aluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed. |
| 85 | S&F in repair door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed |
| 86 | S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300 mm long complete. |
| 87 | S&F 100mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed. |
| 88 | S&F 150mm long Aluminium tower bolt and fixed complete all as specified and directed. |
| 89 | S&F 125 mm size aluminium handle plate type anodised complete all as specified and directed. |
| 90 | S&F in repairs hydraulic door closer Aluminium ( Die cast) regulated designation No-3 universal type for door shutter complete all as spd |
| 91 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified |
| 92 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 93 | S&F in repairs of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 94 | M&L for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 95 | M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in fixing of hold fast, bed blocks etc including necessary form work as required complete all as specified and directed. |
| 96 | S&F in repair for PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, fixed to walls including necessary clamps etc complete all as specified and as directed. |
| 97 | S & F in repair PVC (SWR) 110 mm pipes single socketed, in any length with rubber ring joints, laid in trenches including necessary clamps etc complete all as specified and as directed. |
| 98 | S&F in repair for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to walls including necessary clamps etc complete all as specified and as directed. |
| 99 | S & F in repair PVC (SWR) 75 mm pipes single socketed, in any length with rubber ring joints, laid in trenches including necessary clamps etc complete all as specified and as directed. |
| 100 | S & F in repair 75 bore PVC (SWR) bends any radius complete all as specified and directed. |
| 101 | S & F in repair 110 bore PVC (SWR) bends any radius complete all as specified and directed. |
| 102 | S & F in repair PVC (SWR) junction single 75 mm , (Single T) equal or unequal complete all as specified and directed. |
| 103 | S & F in repair PVC (SWR) junction single 110 mm , (Single T) equal or unequal complete all as specified and directed. |
| 104 | S & F in repair PVC (SWR) vent cowls 110 mm dia complete all as specified and directed.. |
| 105 | S&F in repair for PVC (SWR) floor trap 75 mm, plain with & including CP grating, including jointing with solvent cement complete all as specified and directed |
| 106 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed. |
| 107 | S&F in repair chromium plated Soap disk fixed to plug with chormium plated brass screws all as specified and directed |
| 108 | S & F in repair 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with brackets complete all as specified. |
| 109 | S&F mild steel work as hold fasts, bands, straps, supports or stays for pipes eaves gutter including bolts if required, hooks (stay), clamps and similar small articles, conforming toFe 310-0 or Fe 410-0 complete all as specified and directed. |
| 110 | S&F mild steel framed work such as purlin , truss, square tube , MS pole , grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, welded wire mesh and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 111 | M&L for preparation of old or previously treated wooden surfaces of any description,not otherwise descri- bed over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 112 | S&F in repair Vitreous China wash downwater closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed by Engineer-in-Charge |
| 113 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 114 | S&F aluminium three track powder coated of any colour (thickness of powder coating not less than 50 micron) sliding window with three sliding shutter the size of outer frame three track 92x31.5x1.2mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37x18x1.2mm) and glazing with 4.8mm thick glas (Plain/floated) incl allround suitable rubber gasket and MS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle incl rocking arrangement & 2 numbers sliding rollers of nylon with incl all necessary fittings complete all as specified and directed. |
| 115 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and ready to receive glass or wire mesh complete all as specified and directed |
| 116 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded and ready to receive glass or wire mesh complete all as specified and directed |
| 117 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by Eng in charge |
| 118 | Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified. |
| 119 | M&L 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed. |
| 120 | S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified. |
| 121 | M&L 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP No-1 liguid @ 200ml of per 50 kg of cement complete all as specified. |
| 122 | M&L for APP based polymeric membrane minimum weighing 3.00Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, with side lap not less 100mm and end lap not less than 150mm complete all specified. |
| 123 | M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified |
| 124 | S&F in repair vitreous china wash basin of padestal pattern white, flat back, size 450 mm x 300 mm, and height 750 mm including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed. |
| 125 | S&F in repair Cabinet Mirror of size 400 x 500 mm complete all as specified and directed. |
| 126 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 127 | M&L For Roof tiles, Mangalore pattern, interlocking at side joints on chhajja top, laid on 15mm thick screed bed or bedding in CM 1:4 complete. |
| 128 | M&L for demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed |
| 129 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed of 20 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 130 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 10 above with back coat of 10 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 131 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15 mm Thick set in CM 1:6 complete all as specified and directed |
| 132 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 133 | Supply & Fixing in repair kitchen plate rack of stain less steel 1.00 mm thick of size 90 x 90 cm with suitable shelves/rack complete all as specified and directed by Engineer-in-Charge. |
| 134 | Supply and fixing in repair sinks with out drainage board made of stainless steel 0.75mm thick kitchen or laboratory, overall size 430mm x 510mm bowl size 430mm x 380mm x 203mm complete all as specified and directed as approved by Engr-in-Charge. |
| 135 | S&F in repair one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed by Engr-in-Charge |
| 136 | M & L for providing plain cement concrete type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 137 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 138 | M&L for 15mm thick cement plaster as in sunken portion of WC/Bath room using CM (1:4) on fair faces of concrete surfaces using WPC where ever required as per manufacturerer's instructions and incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 139 | M&L for 40mm thick PCC 1:2:4 type B-1 as in Sunken Portion of WC/Bath room (using 20mm graded stone aggregate) complete all as specifed and directed. |
| 140 | M&L for cleaning surface of Sunken Portion of WC and applying a coat of bitumen primer @0.30 Kg/Sqm and thereafter applying a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and provn of APP based polymeric membrane minimum weighing 3.00Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms/sqm) laid on bituminous surfaces by forced application over entire floor area, with side lap not less 100mm and end lap not less than 150mm complete all specified. |
| 141 | M&L for cement concrete with Type E2 1:5:10 mix using 40mm graded coarse aggregate in sunken Portion of WC/bath room complete all as specified and as directed. |
| 142 | M&L for applying one coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete |
| 143 | S&F Steel Water Tubing 40mm dia (Bore), Galvanised, ‘Medium Grade’ , fixed on sunken , complete as all specified and as directed. |
| 144 | S&F in repair Contnuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30mm complete all as specified and directed. |
| 145 | M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base Complete all as specified and directed. Please Enable Macros to View BoQ information |
