|
| 1 | Credit of filter media 4th layer |
| 2 | Brick Bats |
| 3 | Credit of filter media 2nd layer |
| 4 | Credit of filter media 3rd layer |
| 5 | Credit of filter media 5th/Bottom layer |
| 6 | credit of 80 mm i/d GI pipe having 3.05 m length, threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts ( `W make), rubber gaskets, lowering into Tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. |
| 7 | Credit Of Existing unserviceable Panel board 150 bhp |
| 8 | Credit of Filter Bed Plates |
| 9 | Credit of Old CI pipe/CI Special/CI Sluice Valve |
| 10 | Credit of Old Dismantled Steel |
| 11 | Credit of Top layer filter media |
| 12 | HT PanelSupply, Installation, Testing and Commissioning of 11 kV VCB Panel 11 kV Switchgear Panel comprising of 1 nos. of indoor type VCB panels, suitable for solidly grounded system, fully factory built and assembled for direct installation. The panels should be designed, manufactured and tested in accordance with relevant IS / IEC with latest amendment.1. Construction The VCB (cubicle and circuit breaker) panel should be made of steel clad, free standing, floor mounting, dust and vermn proof and horizontal isolation horizontal draw out, compartmentalized type, indoor switch board in standard execution with VCB.The draw out type circuit breaker cubicles should be fabricated using high quality CRCA/GI steel sheet/ Aluzinc material as per standard. The sheet metal should be given minimum seven/nine tank anti corrosion treatment and then powder coated colour- SIEMENS GREY or equivalent. The totally metal enclosed panel shall be compartmentalized with internal positioning by insulated material of epoxy- reinforced fiberglass to constitute the following:a) Bus bar compartmentb)Circuit Breaker Compartment.c) CT and Cable compartment.d) Relay and metering compartment (LT compartment). As required and as per technical specifications including fitting testing comissioning , carriage complete with |
| 13 | Less Credit of Bricks |
| 14 | Providing and Fixing 80 mm o/d UPVC 10kgf/cm2 column pipe for T/w flanged/ threaded complete 3.05 m length, their threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts ( `W make), rubber gaskets, lowering into Tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. |
| 15 | Providing and fixing of 100 watt LED Light with all accessories complete in all respect as per satisfaction of Engineer-In-Charge |
| 16 | Supply, erection, testing and commissioning of wall mounted electrical panelboard, fabricated from 16 SWG CRCA sheet duly stouted with suitable angleiron frame work and completely coated of approximate size powered 1800 x1200mm and 400mm deep having following items a) For 2 nos Raw Water Pump Sets for 7655 x 50 Mtrs Head. (a) Main switch 500 Amp, 2 Nos. (LandT Siemens, ABB)(b) Volt meter 100 x 100 mm range 0 to 500 volt 1 No. (AE/KAPPA/LandT)(c) Amp. Meter 100 x100mm range 0 to 500 Amp 2 Nos. (AE/KAPPA/LandT)(d) CT (AE/KAPPA/LandT)(e) VSS 1 No. and ASS 2 No. each approved make(f) SPP 1 No. of approved make(g) Motor starter, Star Delta 2 No. for 7655 LPM 50 Mtrs. Head Motor(LandT, Siemens , BCH, AAB)(h) Capacitor of suitable capacity-2 Nos.(i) indicating Lamp One Set(1) Inbuilt Change over switch 500 Amp = 1 Nos including wiring f suitable capacity from VCB panel to Panel Board and upto pumping machinery complete job including,commissioning complete in all respect |
| 17 | Item Description |
| 18 | HSR Items for DNIT Name Name of Work:- Dismantling of Existing Structures at Water Works Uklana mandi and Uklana Village for construction of WTP and other proposed structures at water works and all other works contingent thereto. Chargeable to:-`UKLANA TOWN: DPR FOR AUGMENTATION OF WATER SUPPLY SCHEME and STRENGTHENING OF EXISTING PIPING NETWORK OF UKLANA TOWN DISTRICT HISAR. Please Enable Macros to View BoQ information |
