|
| 1 | Auditorium Audio SystemSupply installation testing and commisioning of flying ,Line arrayable Full Size 15\\", 2 Way, bi-ampable speaker . The speaker cabinet must have HF Transducer of =>1.5 inches diaphragm compression driver, frequency range of 50 Hz – 19 kHz; Frequency Response (-3 dB): 60 Hz – 16 kHz, Axial Sensitivity >= 97 dB (1W/1m), deleviering Max. Calculated SPL >= 131 dB with continuous passive power handling 500W or more. The speaker should have a nominal impedance of 8 ohm .The speaker cabinet should have a Rotatable Coverage: 90° x 35° or better for better far and near field experiance.Speaker must have 20 or more suspension points for permanent installation.Enclosure material should be birch plywood . Installation complete with Black Vertical Rigging Kit for arrayable speakers. Installation complete with Black Vertical Rigging Kit for arrayable speakers. |
| 2 | Supply Installation Testing and Commissioning of Mounting arrangement OEM Manufactured Grid for hanging Line array speakers & subwoofers, |
| 3 | Supply, Installation, Testing & Commissioning of Supply of Subwoofer 18\\" Floor/ Flying Subwoofer with a Frequency Response(-3dB):- 38Hz-90Hz; Frequency Range (-10dB):- 30Hz-130Hz ; Axial Sensitivity > 96dB & Long Term Power Handling of ≤ 400W (at a Nominal Impedance of 8 Ω). The Loudspeaker should have a Max. SPL of >128dB. It should comply with IEC60529, IP44 environmental specs & should have atleast 8 suspension points. |
| 4 | Supply Installation Testing and Commissioning of Self powered 12\\" full range speaker with a built in 1000W RMS amplifier. The backside of the speaker to contain a LCD display and 1-knob DSP control with presets for precise and speedy setup. Coverage angle of the speaker to be 90 deg X 60 Deg, integrated top handle as well as pole mount facility. Must also be able to be used as a stage/floor monitor. Speaker to contain 2) XLR/TRS Combo Jack, (1) 3.5 mm Input, and (1) XLR link Output. Speaker to generate a max SPL of 125 dB |
| 5 | Supply Installation Testing and Commissioning of Dual 4\\" two-Way Speaker with a Frequency Range(-10dB):- 62Hz-20Khz & Long Term Power Handling of>=100W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of 94dB with a Max. SPL of >=118dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 100x80 Degrees or better. The Speaker Should Come with OEM wall Mounting Bracket with a Sweep Range of upto 100Degrees. |
| 6 | Supply Installation Testing and Commissioning of 2-way loudspeaker System with minimum 1 x 8” LF, HF - 1\\"driver , Frequency Range (-10 dB ): 60 Hz - 20 kHz +/-10Hz is acceptable on both ends of the audio spectrum,Sensitivity: >=94dB, Max SPL: >=123dB , Continuous Power: <=200W, Nominal Impedance: 8 Ohms, Nominal Dispersion: 90 x 60 degrees, complete with mounting bracket etc as required. |
| 7 | Supply, Installation, Testing & Commissioning of Dual channel power amplifier with inbuilt DSP, Max Midband Output Power >=950W @ 8 Ω; >=1800W @ 4 Ω & >=3200W @ 2 Ω,Max Bridged Output Power>=6000W @ 4 ohms,,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 109 dB, Crosstalk < -80 dB with built in protection such as Audio Limiters,output delay per channel, with GEQ configurable per channel,PEQ per channel |
| 8 | Supply Installation Testing and Commissioning of 2‑channel power amplifier shall have a total power of 600 W, capable of power sharing either 4-ohm, 8-ohm, 70 V or 100 V conditions on any channel simultaneously, shall have thermal design to operate in extreme thermal conditions < 45 °C without reduction or shutdown. The amplifier shall be equipped with a PFC power supply and protections to ensure reliable and safe operation including High Frequency Limiter , Output Current Limiter , High Frequency Protection, DC Protection, Over Current Protection, Mains Fail Protection, Output Balance Protection, Over Temperature Protection, Over Voltage Protection etc. |
| 9 | Supply Installation Testing and Commissioning of Number of Channels 4 microphone / line inputs, plus music source input,LED VU meter for master output (LEDs for -18, -12 -6,-3, 0 dB),Frequency response (Line) 60 Hz to 20 kHz (+1/‑3 dB @‑10 dB ref. rated output),Frequency response (Mic.) 70 Hz to 20 kHz (+1/‑3 dB @ ‑10 dB ref. rated output,Distortion <1% @ rated output power, 1 kHz,Mic./Line input 4 x,Input 1 (push-to-talk contact with priority) 5‑pin Euro style, balanced, phantom,Sensitivity 1 mV (mic.); 300 mV (line),Impedance >1 kohm (mic.); >5 kohm (line),S/N (flat at max volume) >63 dB (mic.); >70 dB (line),Loudspeaker output Max / rated 360 W / 240 W,Speech filter -3 dB @ 315 Hz, high-pass, 6 dB/oct |
| 10 | Supply Installation Testing and Commissioning of Corded Vocal Microphone with Dynamic Neodymium Magnet microphone element,with frequency response 80Hz-16kHz,Super-Cardioid polar pattern,sensitivity of 2.2mV/Pa and output impedence 600 ohm |
| 11 | Supply Installation Testing and Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz |
| 12 | Supply Installation Testing and Commissioning of Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,sensitivity 5.5mV/Pa,clipping level >134dB SPL ,output impendence 200 ohm, Dynamic Range > 100 |
| 13 | Supply and Laying Heavy duty 2 core 1.5 sq mm LS cable |
| 14 | Supply and Laying Heavy duty 2 core shielded mic cable |
| 15 | Supply and Laying Mic / speaker points |
| 16 | Supply Installation of Table stand |
| 17 | Supply Installation of Floor stand |
| 18 | Auditorium Stage lighting & Stage Furnishing SystemSupply Installation Testing and Commissioning of Powerful DMX operating system.Intel Core Dual Processor CPU2.8 GHz. 120G Solid state drive.4G memory.Built-in a 15.4 inch touch screen, can extend to a 17 inch touch screen. 12 DMX universes: 8 physical DMX outputs and expand to 12 by an Ethernet output. 6144 channels. 10 direct macro buttons and macro library. 20 submasters for cues, cue lists and chases. 1000 virtual playback Executors. Support of Artnet, Avotalk, and CITP protocals. Strong CMY Palette function. Can be remote controlled using Wi-fi form a mobile internet device (like Iphone,Ipad Touch etc.) Built-in thousands of fixture library and its edit software. Built-in Visualiser Software. Support of multi- media(video) via CIPT. |
| 19 | Supply Installation Testing and Commissioning of LED COB Par: Light Source:Led Power: 180W, LED Color: RGB 3in1 (180W) Led Lamp: imported from Japan ,LED Life Time: over 50,000 hours, Color Rendering Index(CRI): Ra≥90, Max can be 97, Power Supply: Voltage: AC90V-260V 50-60 Hz, Power consumption: 160W/250W/260W, Optics: LED angle: 60° Dimmer: 0~100% linearly adjustable, Refresh rate: 4000Hz, flick free for TV and Studio, Features: Setting and Addressing: 4-digit Light body: Die-casting Aluminum, House Color: Black with barndoor, Control: Control Mode: DMX 512, Master-Slave/Sound activated/Auto mode ,DMX Channels: 1/3CH (Single color), 2/5CH(2in1), 3/7CH(RGB), Working Environment: Environment Temperature: -30°~40°C, Led Cooling: Forced Air Convection, with 1 Fan ,Technology: Thermal management system ensures long life of LED ,Fan Noise: 12.1~20dB ,Fan Speed: 900-2,000RPM+-10%, IP Grade: IP20, Complete with Barn Door, all connectors , cables and Plug Tops. |
| 20 | Supply Installation Testing and Commissioning of LED Profile light : Light Source:Led Power: 180W, LED Color: RGB 3in1 (180W), COB LED, Led Lamp: imported from Japan, Color Rendering Index(CRI): Ra≥90, Max can be 97, Power Supply: Voltage: AC90V-260V, Max. power consumption: 200W/250W/260W/390W, Optics:Zoom Function: Manual Zoom Beam Angle: 12° to 30° or 25° to 50°,LED Life Time: over 50,000 hours Features: Dimming Curve: 4 kinds, Dimming Mode Frequency: 300Hz-4200Hz optional ,Strobe:1-25 times/sec ,Focus: can be adjusted by hand, Technology: High-quality optical system, glass reflector ,Control: Control Protocol: RDM/DMX, Control System: DMX, Auto run and Master/Slave ,DMX Channels: 1/3CH(single color), 2/5CH(2in1), 3/7CH(RGB), 4/8(RGBW), Working Environment: Working Temperature: -30~40°C Cooling System: No noise fan (copper tube) Thermal Sensor Monitoring: Over-temperature Protection IP Grade: IP20 |
| 21 | Supply Installation Testing and Commissioning of LED Fresnel light Light Source: Led Power: 150W ,LED Color: RGB 3in1 (150W), COB LED, Led Lamp: imported from Japan, Color Rendering Index(CRI): Ra≥90, Max can be 97, Power Supply: Voltage: AC90V-260V Max. power consumption: 200W/250W/260W/390W, Optics: Dimmer: 0~100% linearly adjustable, Zooming Scale: 15-50° ,LED Life Time: over 50,000 hours, Features: Dimming Curve: 4 kinds, Dimming Mode Frequency: 300Hz-4200Hz optional with DMX auto zoom or Manual Zoom, House Material: Aluminum alloy, House Color: Black ,Light Body Feature: Light Body: PVC Body Color: Black,Feature of Housing: Small Volume, Lightweight,Control: Control Protocol: RDM/DMX ,Control System: DMX, Auto run and Master/Slave ,DMX Channel: DMX auto zoom: 2/5 CH (single color), 3/7 CH(2in1), 4/9 CH (RGB) , 5/10 CH (RGBW) ,Manual zoom: 1/3 CH(single color), 2/5 CH(2in1), 3/7 CH(RGB), 4/8CH(RGBW),Working Environment: Working Temperature: -30°~40°C Cooling System: No noise fan (copper tube) IP Grade: IP20 Complete with all connectors and cables etc. |
| 22 | Supply Installation Testing and Commissioning of LED Wash light having Voltage:AC90V-260V , 50Hz-60H, Power:420W , Light source:36pcs*10W quad in1 LEDs, Channel:16 CH, Environment temperature:104F (40C ), Level: 540 degree , 16 bit Vertical:240 degree , 16 bit, Dimmer:electric dimmer , 10-100%linear adjust Strobe:1-18 times / sec (conventional strobe , Lei random, strobe,Suddenly dark gradually bright strobe ,Suddenly the light dimming strobe ) ,linear adjust RGB 256*256*256 non-polar mixed color, Control mode: Master-slave mode/Sound activated mode/Standalone mode Auto mode,,Complete with all connectors, cables and Plug Tops. |
| 23 | Supply Installation Testing and Commissioning of LED bar light Input Voltage : AC100V~AC240V, 50/60Hz;, Power Consumption : 180W; Lamp Specifications :18 pcs 4/5/6 in one high-efficiency 12W LED, rated life 50000 hours; Lens Angle:25º(optional:45 °); Spot Angle:40º; Color: RGBW, RGBWA, RGBWA+UV linear color mixing; Color Temperature: color cast calibration setting , color –temperature output inside device; Dimmer: 0-100% linearly dimming ,5 dimmer modes:32-bits dimming, still keep smooth dimming when changing at the range of low DMX value ;Refresh, Frequency:1800Hz, no blink when camera shooting; Shutter: independent electronic strobe ; Control Mode: Standard DMX512,3 pin interfaces ;5 Channel modes; Master/slave mode, no need to set up the master and slave manually, will receive the main engine data automatically ;33 autorunning modes, rainbow channel, rainbow effect and flow water effect; Complete with all connectors , cables and Plug Tops. complete as required |
| 24 | Supply Installation Testing and Commissioning of LED PAR Light Voltage :110-220V 50/60HZ Power: 200W, Light source: 18pcs x 10W super bright LED, Color: 4in1 5in 6in 1 RGBW RGBWA RGBWA+UV Beam angle:15° ,Life titme:6-10 million hours ,Dimming: from 0-100% electronic dimming ,Strobe speed: frequency 1-13Hz, Functions: digital features, Channel:9CH, Control mode:DMX512, Automic, Strobe ,Master&slave ,Working environment: -20 degrees to 40 degrees Complete with all connectors , cables and Plug Tops. complete as required |
| 25 | Supply Installation Testing and Commissioning of DMX Splitter in a Rugged anodized aluminum housing 8 Independently protected output ports ,RJ45 Ports for each DMX connection DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters Transient Voltage Supression (TVS) and Self-Resetting Poly-Switch Fuses for each port ,DMX signal range up to 1,800 feet (550 meters) from each output port Compatibility with DMX512 and Color Kinetics® devices, User-selectable polarity inversion for converting between standard DMX and Color Kinetics® wiring schemes ,User-selectable input line termination switch Optional mounting bracket kits for panel, DIN Rail, or truss mounting. Ultra-compact design provides 8 DMX ports in just 14in2 (95cm2) |
| 26 | Supply Installation Testing and Commissioning of MS angle gridover the stage for supporting stage equipment in position twin 50x50x5mm MS angle with welded connection, suspended from ceiling structure/ slab by MS flat suspenders with expansion fasteners, centre to centre, fixed to wall/beam support with MS plate with expansion fasteners etc. painted black with 2 coats of paint and coat of primer. |
| 27 | Supply Installation Testing and Commissioning of Wiring for DMX Control Lighting as per manufacturer Standard |
| 28 | Supply Installation Testing and Commissioning of M.S. Pipe Ladders to be provided on sides of the Stage to be fixed on the existing GI pipe or top grid. Made of 50mm x 25mm MS pipe Size: - 600 mm x 1800 mm ( Nominal Size ) |
| 29 | Stage Furnishing SystemMAIN CURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies 4mm steel wire rope. 0.75 HP motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering with masking frill drop from prosc. with masking frill 1000mm Drop from Prosc. Complete as required. |
| 30 | Rear curtain of size REAR CURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement and motorised operation complete with runners, master runners, pullies, 4mm steel rope wire, 0.75HP motor (Crompton) 2 nos, air breaker contactors (L&T/SIEMENS), 2 nos. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm. The curtain should be stitched in double gathering. Complete as required. |
| 31 | Cyclorama screen in non perforated material. The screen to be fixed on tubular frame made out of 35mm dia MS pipe. Complete as required. |
| 32 | Cloth wings made out of black glazed cotton cloth fixed on 6mm thick commercial plywood fixed on one side of MS 50mm x 25mmx 16G pipe wielded frame work. The pipe framework made out of 25mm x 50 mm pipe. c/c 900 x 900 fixed with overhead pivote track complete with duly painted on both framework. Complete as required. |
| 33 | Frills made out of double gathering velvet cloth to be installed above the stage on 28mm dia GI pipe. complete as required. |
| 34 | Frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipe. complete as required. |
| 35 | Supply and fixing in position 50mm dia Class B GI pipe for fixing frills, etc., suspended from ceiling overhead GI pipe grid/struss, 1200 c/c with 40x5mm thick MS flat complete as required |
| 36 | Curtain control System |
| 37 | Auditorium Projection System-Supply and installation of graphic Display system of the following configuration :- Configuration SMD 3-in-1 Pixel Pitch COS/COB/flip chip for human touch Protection based Indoor Direct View True Color LED Wall size 16.72 X 9.42 FT or higher inclusive Pixel Density 64500 pixels/m2 OR Better Brightness 800 cd/m2 or more IP,PP-4 MM, tile size 640 X 480 MM Grade IP30 / IP50 module IP 65 Lifetime (Typical) ≥100,000 hrs Viewing AngleHorizontal160° Vertical 160 or better, Dimming Capability0-255 level Contrast Ratio*5000:1 or higher Refresh Rate*1920Hz or higher Color Processing*16 Bit or higher Colors*4.4 Trillion or higher of LED control Processor Contro lRS232 Can be Cascaded for Uniform ControlInputsAUDIO IN 1 x AUDIO INPUT PORTDVI IN 1 x DVI INPUT PORTOutputs OUTPUT (1 TO 4) 4 x LAN OUTPUT PORT/ FIBER OPTICDVI OUT 1 x DVI OUTPUT PORT Resolution SupportInput Resolution Support1920 x 1200,2048 x 1152,2560 x 960,& other user define resolutions (under 2.3 million pixels)Maximum Width Output 2048 pixelsMaximum Height Output 1200 pixelsPowerInput voltage (AC) AC 100-240 V–50/60 HzRated power consumption 2.9 WOperating temperature -20°C–60°COperating humidity 10% RH–90% RHDimensions video prosseser Inputs1X DVI, 1X HDMI, 2 X VGA, 1 X Composite Video, 1 x SDI/HD-SDI Input Resolution Full HD or better Output 2xDVI,1 XVGA ControlPanel/Knob RS232 Power100~240VACOperating Temperature5~40 Deg C Switching Seamless Switching, Fade in Fade Out Switching & Blend Switch Power Distribution Unit, Structure to mount in trolly solutions LED & I&C (1 Nos.)Power Distribution Unit ,Power Distribution UnitA Power Distribution Unit to be provided to provide power to the LED walls.Cable pointsCable entry and exit points should be providedSurge protectionClass C MaterialDie-cast Aluminum Power |
| 38 | Redundancy(Optional)SupportWith all video processor,Led controller,LED and installation should be a same OEM. 7.1 OEM should have their own registered office in India from the last 15 years on the date of bid submission. OEM of LED Display should have at least 150 cr. turnover in India in last financial year. OEM shall be ISO 9001, ISO 14001, OHSAS 45001 & ISO 27001:1 certified NABL with MII – Certificates to be submit. OEM should have their own service center across India for support. Franchised or Authorized service center are not acceptable Service centers should be available in all major metro cities with their own engineer at each location. GST registration number for all these service centers. Installation, Commissioning, after Sales support shall be provided by OEM only. OEM of the offered Active LED indoor screen should have experience of supplying minimum 15 same product Active LED Indoor Screen of same or better pixel pitch in Consinee location . This supply could be either directly of through a partner or system integrator. SLD provide by at the time of bid by OEM. Structure drawing provide By OEM only . Installtion and service Provide by OEM only . All product data sheet attached at the time of bid also available in public domain.BIS should be a name of same OEM and Factory address. Service Matrix provide by OEM. OEM Presence in Consignee state.(proof required) 5% spare with stock and vacuime machine prodive by OEM. warranty 1 years at the time of installation. |
| 39 | Supply Installation Testing and Commissioning of High−performance presentation scaler/switcher for HDMI . The unit scales the video, embeds the audio, and outputs the signal to two HDMI (with embedded audio) outputs (with S/PDIF and balanced stereo audio) simultaneously with Pix Perfect Scaling Technology precision pixel mapping and high−quality scaling technology. High−quality 3:2 and 2:2 pull down de−interlacing and full up and down scaling of all video input signals,Video Inputs - 5 HDMI ,Scaled Outputs - 2 HDMI , - Up to WUXGA/1080p and Auto Input Scanning and Switching. |
| 40 | Supply, Installation, testing and commissioning of 65\\" LED Panel : Specifications :Size: 65” or Higher input, Type/Tech: IPS Type, Display Area (mm): Minimum 1204mm(H) x 1966.04(V), Aspect Ratio: 16:9, Native Resolution: 4K60hz Colors: 10 bits, Brightness: Minimum 450 Nits or Higher, Contrast Ratio: 30000:1 (DCR),Response Time: 8ms or Better, Viewing Angles: H = 178, V = 178 typ., Backlight Life: Minimum 50,000hr of Higher, Surface Treatment: Hardness: 7H, Thickness: 3mm,Orientation: Landscape, Processor: Octa Core ARM Cortex-A55*8 or Higher, RAM: 8GB DDR4 or More, Storage: 128GB or More, Type/ Tech: Recognition/ P-Cap, Touch Point Minimum for Windows: 33 points touch for Android: 20 points touch ,HDMI In: x2 (Front*1, Rear*1), Audio In: PC audio in (3.5 mm)*1, RS232: x1, OPS: 1,Audio Out: 3.5mm x1, SPDIF: x1, RJ45: x2, Type A: USB 2.0 x1(Side x1)USB 3.0 x4 (Front x2, Side x2), Type B: x2, for touch, Type C: x1, Built In 6 Array Mics in, built in Interactive Display, SPEAKERS: 18W x 2, Power Consumption: 230W or Less, Certifications: BIS & RoHS Wireless collaboration S/w Wireless collaboration to connect Windows/Mac/ Android devices |
| 41 | Supply Installation Testing and Commissioning of UTP based HDMI Transmitter: HDMI, Bidirectional RS−232 & IR over Twisted Pair Transmitter; Input: 1 HDMI; Output: 1 CAT 5; Supports HDMI and HDCP. |
| 42 | Supply Installation Testing and Commissioning of UTP based HDMI Receiver: HDMI, Bidirectional RS−232 & IR over Twisted Pair Receiver; Input: 1 CAT 5; Output: 1 HDMI; Supports HDMI and HDCP. |
| 43 | Supply Installation Testing and Commissioning of Pop up Box for Laptop Presentation |
| 44 | SCHEDULE (C) |
| 45 | Supply and Laying HDMI Cable |
| 46 | Supply and Laying Shielded Twisted Pair Cable |
| 47 | Add: GST @18% Please Enable Macros to View BoQ information |
