| 1 | Washer for DT car bogie replacement of RS-2 a) Plain Washer for Centre Pivot-08 nos. 20-200HV-St-A3C- ISO 7089 BT Part No. = 100104369 b) Plain Washer for Lateral Damper & earth ret urn cable -08+02 =10 nos. 12-200HV-ST-A3C- ISO 7089 BT Part No. =100104367 c) Conical Spring Washer for Vertical Damper Mount-08 nos. ""FST 12 DIN 6796 BT Part No. =100001109 d) Conical Sp ring Washer for Anti Roll Bar Body Bracket-08 nos. 16-Fst-A3C, DIN 6796 BT Part No. =100104405 e) Conical Spring Washer for speed sensor on axle box-04 nos. ""8-Fst- A3C, DIN 6796 BT Part No. =100 001107 f) Plain Washer for Bogie to coach earth cable-02nos. 10-200HV-St-A3C. ISO 7089 BT Part No . =100104366 g) Strain washer for Bogie to coach earth cable-02nos. M10 as per sample h) Plain wa sher for APC reciever/ATP antenna cable, ATP odometer cable, cleat for bogie to axle earth cable-30 +8+1=39 nos.8-200HV-St-A2C. ISO 7089 BT Part No. =100104365 Make:- BUFAB, Vardhman Industr ial Fasteners, LPS BOSSARD PVT. LTD. , Shaildeep Engineering Private Limited, etc. ] |
| 2 | Lock Nut for DT car rear bogie overhauling of Rs-2 "i) Lock nut for Radial arm, Qty=16 nos. ""Prev Torque Type (Thread type/Thread: M20, Pitch: 2.5, Grade 8) Surface Protection: A3C (ISO 4042)., OR Lanfranco Part no: M20-8-A3C. CF 00-040FP6, OR BT Part No. =100104344"" OR Bufab Pa rt no: AG183459-01 ii) Lock nut for Anti roll bar foundation bracket, WFL bracket, Qty= 8+6=14 nos. ""Prev Torque Type (Thread type/Thread: M16, Pitch: 2, Grade 8 ) Surface Protection: A3C (ISO 4042) , OR Lanfranco Part no: M16-8-A3C CF 00-040FP6, OR BT Part No. =100104343"" OR Bufab Part no: A G183459-02 iii) Lock nut for Primary vertical damper, Secondary vertical damper, Bogie to axle earth cable, Qty= 16+08+01=25 nos. ""Prev Torque Type (Thread type/Thread: M12, Pitch: 1.75, Grade 8) Surface protection: A3C(ISO 4042), OR Lanfranco Part no: M12-8-A3C CF 00-040FP6, OR BT Part No. =100104342"" OR Bufab Part no: AG183459-03 iv) Lock nut for Lateral Buffer, WFL applicator,Levelli ng rod, Qty= 8+6+6=20 nos. ""Prev Torque Type (Thread type/Thread: M10, Pitch: 1.5, Grade 8) Sur face protection: A3C (ISO 4042). OR Lanfranco Part no: M10-8-A3C CF 00-040FP6, OR BT Part No. =1 00104341"" OR Bufab Part no: AG183459-04 v) Lock Nut for Brake caliper, Qty= 16 nos. (Thread type /Thread: M20, Pitch: 1.5, Grade: 10, Standard ISO 10513), Surface protection: A3C (ISO 4042) Dimen sion: As per sample (approx. dimension is attached as annexure A) OR BT Part no: 100107935, vi) Lo ck nut for cleat for bogie to axle earth cable, Qty=01 no. ""Prev Torque Type (Thread type/Thread: M 8, Pitch: 1.25, Grade 8) Surface Protection: A2C (ISO 4042), OR Lanfranco Part no: M8-8-A2C CF 00-0 40FP6, OR BT Part No. =100104340 OR Bufab Part no: AG183459-05 Note: 1) Prevailing Torque as pe r ISO 2320 2) Mechanical properties as per ISO 898-2 3) Certificate of genuinity required from vendo r." ] |
| 3 | Fastener kit for Air Spring of RS-2/5/7/11 "Kit consisting of following two items :- 1) Cou ntersunk Screw M16 x 40, Pitch = 2.0, Grade 8.8 DIN 7991. BT Part No. 3EGS100001-2047 Quantity- 16 no's 2) Cap Head Screw M8 x 20, Pitch = 1.25, Grade A2 DIN 912. BT Part No. 1019738 Quantity- 8 no's. Make:- BUFAB, Vardhman Industrial Fasteners, LPS BOSSARD Pvt. Ltd., Shaildeep Engineering Pvt. Ltd. ] |
