|
| 1 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 metre ¼200ft.) SI no. 706 |
| 2 | 12 mm plaster with 1:6 cement and course sand as per dsr 13.4.2( 1cement:6 course sand) |
| 3 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 metres ¼200ft½ |
| 4 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (As per DAR No.13.26)/As per Anlaysis |
| 5 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surfac |
| 6 | two coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work. |
| 7 | Painting \ on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950. |
| 8 | Renewing glass panes, with putty and nails wherever necessary including racking out the old puttyFloat glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 9 | Dismantling doors and windows leaves, including stacking of material as directed by the Engineer-in-charge with in a distance of 60 metre ¼200 ft.) |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 32 mm thick including ISI marked Stainless Steel butt hinges with necessary |
| 11 | Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismantled materials as directed by the Engineer-in- charge with in a distance of 60 metres ¼200ft½ |
| 12 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 13 | providing and fixing T- iron frame door windows and ventilators weldid section including fixing of necessary hings butts and scresw as per dsr 10.125.1 |
| 14 | providing and fixing fly proof galvnazed m.s. wire gauge to windows and clerestory using wire gauge with avg. with and aperture 1.40mm in both directions as per dsr 9.51.1 |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 11.41.2 600mmx600mm |
| 17 | providing and fixing 18mm thick gaing saw cut mirrir polished premodueld and pre polished machine cut for kitchen plateform as per dsr 8.2.1.118 mm thick |
| 18 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in- Charge with in a distance of 60 metres ¼200 ft.) |
| 19 | Brick work 7 cm thick with common burnt clay (non modular) brick of class -150 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. |
| 20 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm |
| 21 | Roof treatement work with Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) + murda jali + watar proofimg compound finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 75 mm diameter As per DSr no. 12.41.1 |
| 23 | Providing and fixing Qrissa pattern W,C. PAN size 580x540 as per dsr 17.1.1 |
| 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17.7.1 |
| 25 | Supply and fixing of Looking Mirror with H.B. 600x450mm complete with hard board |
| 26 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 27 | Supply of C.P. Brass bib cock long body |
| 28 | Supply of C.P. Towerl Rail |
| 29 | Supply of C.P. Jali 6\\" dia |
| 30 | Dismantling of bathroom mosic plaster, dado floor & all other damaged W/s sanitry fittings complete Please Enable Macros to View BoQ information |
