|
| 1 | Part-A: Dismantling, Repairing & fitting of Complete Pumps - 2 Nos. of Pump of Make - Wilo, PumpSense and Flowmore as per requirement |
| 2 | Dismantling and cleaning of the all the spares of rotating assembly Man Power:- A) 4 Skilled x 2 shift x 8 days |
| 3 | B) 3 Unskilled x 2 shift x 8 days |
| 4 | Hardware store i.e. for cotton waste, Kerosene oil,chisel, emery paper & gasket for pump fittment etc. |
| 5 | Contractor profit on labour charge@10% and tool & tackle charges@2% |
| 6 | Part - B: Complete fittment of the Rotating Assembly - 06 Nos. of Pump of Make - Wilo, PumpSense and Flowmore as per requirement |
| 7 | Manpower :-A) 4 Skilled x 2 shift x 18 days |
| 8 | B) 3 Unskilled x 2 shift x 18 days |
| 9 | Contractor profit on labour charge@10% and tool & tackle charges@2% |
| 10 | Part - C: Repairing of Rotating Assembly - 06 Nos. of Pump of Make - Wilo and Flowmore as per requirement |
| 11 | (1). Repairing of Pump Shaft - 5 Nos. |
| 12 | A) Welding electrode 680CG |
| 13 | B) Welding electrode 660NH |
| 14 | C) Welding charges |
| 15 | D) Machining charges |
| 16 | E) Key Way cutting |
| 17 | (2). Repairing of 08 Nos. Impeller of Pump of Make - Wilo and Flowmore as per requirement as per requirement |
| 18 | A) Welding electrode Lotherem 534 |
| 19 | B) Welding charges |
| 20 | C) Machining charges |
| 21 | D) Dynamic balancing charges |
| 22 | Part- D: Complete repairing by welding with CI Machinable electrodes of 02 Nos. wornout Pump body of (both halves Lower & Upper) including machining of the same by line boring Machine. Pump Model- 250/300 GST, Make - Wilo with Sr No. - 81299360/41/1 & 81299360/41/2 |
| 23 | CI Machinable Welding Electrode. |
| 24 | Welding charges |
| 25 | Machining Charges on heavy duty lathe Machine |
| 26 | Drilling & Tapping |
| 27 | Part - E: Repairing of Neck Ring Seating Area (Both Side) by welding with Cast iron Machinable electrodes of 02 Nos. wornout Pump body and machining of the same by line boring Machine |
| 28 | CI Machinable Welding Electrode. |
| 29 | Welding Charges |
| 30 | Machining Charges on heavy duty lathe M/c |
| 31 | Drilling & Tapping |
| 32 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
