| 1 | Supply of MSDAC 05 DP system including Axle Decetors,Track Sideelectronics,Mushroom/ TLJB,Centeral eveluators,Reset Unit,Relay unit with Final track clearancerelay,Event logger,Diagnostic te rminal,Tool Kits,Line Verifcation box for each Track section/supervisoryTrack section including all OEM ra cks/accosseries fully wired and equippwd with 05 Detection points and04 Track sections as per RDSO S pec.No.RDSO/SPN/176/2013 (Ver.3) or latest. Inbuilt cable length of allTX/RX shall be up t0 15 meter len gth. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 2 | Installation,wiring, testing andcommissioning of Multi Section Digital Axle Counter Indoor Set comprising of processors/central evaluators for section/station/Relay Hut including its associated Ind oor Equipment and wiring of the same to integrate with existing EI/PI/Local Signaling circuits.(One MSDA C set comprises of system fully wired and equipped for 05DP and 04TS as detailed in item of supply.Inst allation and commissioning of Detection point Installation of complete assembly of Track device unit for entry or exit and track side electronic equipment(if applicable) along with all materials including drilling of required size holes on rails (if required) for fixing the track devices, taking the cable lead through anti rodent , anti-oxidant and non-flammable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mushroom and terminating it on terminals including digging of trench under track up to location/track side unit. (All material required for installation of above equipment are t o be supplied by the firm.)(One set includes 05 detection point and 04track section) ] |
| 3 | 1. Supply of Multi Section Digital Axle Counter (MSDAC) system including Axle Detectors, Track side electronics, Central Evaluator, Reset unit, Relay Unit with Final Track clearance relay, Line ve rification box for each Track section, including all OEM racks/accessories fully wired and equipped with 1 0 Detection points and 08 Track sections as per RDSO Specification No.RDSO/ SPN/ 176/2013 (Ver.3) or latest. Inbuilt cable length of all TX/RX shall be up to 15 meter length. (Rate to be quoted per MSDAC se t including DPs) [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 4 | 2. Installation, wiring, testing and commissioning of one Multi Section Digital Axle Counter s Indoors Set comprising of processors/central evaluators for section/station/Relay Hut including its asso ciated Indoor Equipment and wiring of the same to integrate with existing EI/PI/Local Signaling circuits. ( One MSDAC set comprises of system fully wired and equipped for 10DP and 8TS as detailed in item of s upply) ] |
| 5 | 3. Installation and commissioning of Detection point Installation of complete assembly of Track device unit for entry or exit and track side electronic equipment (if applicable) along with Earthing (as detailed in special conditions) with all materials including drilling of required size holes on rails( if re quired) for fixing the track devices, taking the cable lead through anti rodent, anti-oxidant and non-flam mable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/ mushroom and terminating it on terminals including digging of trench under track upto location/track si de unit. (All material required for installation of above equipment are to be supplied by the firm.) Please refer special conditions in Annexure-Special conditions for detailed Installation Guidelines.(rate to be qu oted per DP). ] |
| 6 | Supply of Multi Section Digital Axle Counter (MSDAC) system including Axle Detectors, Tra ck side electronics, Central Evaluator, reset unit, Relay Unit with Final Track clearance relay, Line verific ation box for each Track section, including all OEM racks/accessories fully wired and equipped with 05 D etection point & 04 track sections as per RDSO Specification No. RDSO/ SPN/ 176/2013 (Ver.3) or latest. Inbuilt cable length of all TX/RX shall be up to 15-meter length. (Rate to be quoted per MSDAC set inclu ding DPs) [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 7 | Installation, wiring, testing and commissioning of Multi Section Digital Axle Counter Indoor Sets comprising of processors/ central Evaluators for section/station/Relay hut including its associated I ndoor Equipment and wiring of the same to integrate with existing EI/PI/LOCAL Signaling circuits. One M SDAC sets comprise of system fully wired and equipped for 05 DP and 04 track sections as detailed in it em of supply ] |
| 8 | Installation and commissioning of Detection point Installation of complete assembly of Tra ck device unit for entry or exit and track side electronic equipment (if applicable) along with Earthing (a s detailed in special conditions) with all materials including drilling of required size holes on rails (if requ ired) for fixing the track devices, taking the cable lead through anti rodent, anti-oxidant and non-flamma ble propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mu shroom and terminating it on terminals including digging of trench under track up-to location/track side unit. (All material required for installation of above equipment are to be supplied by the firm.) Please ref er special conditions in Annexe Special conditions for detailed Installation Guidelines. (rate to be quoted per DP). ] |
| 9 | Supply of MSDAC 05 DP system including Axle Decetors,Track Sideelectronics,Mushroom/ TLJB,Centeral eveluators,Reset Unit,Relay unit with Final track clearancerelay,Event logger,Diagnostic te rminal,Tool Kits,Line Verifcation box for each Track section/supervisoryTrack section including all OEM ra cks/accosseries fully wired and equippwd with 05 Detection points and04 Track sections as per RDSO S pec.No.RDSO/SPN/176/2013 (Ver.3) or latest. Inbuilt cable length of allTX/RX shall be up t0 15 meter len gth. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 10 | Installation,wiring, testing andcommissioning of Multi Section Digital Axle Counter Indoor Set comprising of processors/central evaluators for section/station/Relay Hut including its associated Ind oor Equipment and wiring of the same to integrate with existing EI/PI/Local Signaling circuits.(One MSDA C set comprises of system fully wired and equipped for 05DP and 04TS as detailed in item of supply.Inst allation and commissioning of Detection point Installation of complete assembly of Track device unit for entry or exit and track side electronic equipment(if applicable) along with all materials including drilling of required size holes on rails (if required) for fixing the track devices, taking the cable lead through anti rodent , anti-oxidant and non-flammable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mushroom and terminating it on terminals including digging of trench under track up to location/track side unit. (All material required for installation of above equipment are t o be supplied by the firm.)(One set includes 05 detection point and 04track section) ] |
| 11 | Supply of MSDAC 05 DP system including Axle Detectors Track Side electronics , Mushroo m/TLJB , Central eveluators , Reset Unit , Relay unit with Final track clearance relay , Event logger ,Diag nostic terminal ,Tool Kits ,Line Verification box for each Track section/supervisory Track section includin g all OEM racks/accessories fully wired and equipped with 05 Detection points and 04 Track sections as per RDSO Spec. No. RDSO/SPN/176/2013 (Ver.3) or latest. Inbuilt cable length of all TX/RX shall be up t0 15 meter length. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 12 | Installation,wiring, testing andcommissioning of Multi Section Digital Axle Counter Indoor Set comprising of processors/central evaluators for section/station/Relay Hut including its associated Ind oor Equipment and wiring of the same to integrate with existing EI/PI/Local Signaling circuits.(One MSDA C set comprises of system fully wired and equipped for 05DP and 04TS as detailed in item of supply.Inst allation and commissioning of Detection point Installation of complete assembly of Track device unit for entry or exit and track side electronic equipment(if applicable) along with all materials including drilling of required size holes on rails (if required) for fixing the track devices, taking the cable lead through anti rodent , anti-oxidant and non-flammable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mushroom and terminating it on terminals including digging of trench under track up to location/track side unit. (All material required for installation of above equipment are t o be supplied by the firm.)(One set includes 05 detection point and 04track section) ] |
| 13 | Supply of MSDAC 05 DP system including Axle Decetors,Track Side electronics,Mushroom/ TLJB,Centeral eveluators,Reset Unit,Relay unit with Final track clearance relay,Event logger,Diagnostic t erminal,Tool Kits,Line Verifcation box for each Track section/supervisory Track section including all OEM racks/accosseries fully wired and equippwd with 05 Detection points and 04 Track sections as per RDSO Spec.No.RDSO/SPN/176/2013 (Ver.3) or latest. Inbuilt cable length of all TX/RX shall be up t0 15 meter l ength. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 14 | Installation,wiring, testing andcommissioning of Multi Section Digital Axle Counter Indoor Set comprising of processors/central evaluators for section/station/Relay Hut including its associated Ind oor Equipment and wiring of the same to integrate with existing EI/PI/Local Signaling circuits.(One MSDA C set comprises of system fully wired and equipped for 05DP and 04TS as detailed in item of supply.Inst allation and commissioning of Detection point Installation of complete assembly of Track device unit for entry or exit and track side electronic equipment(if applicable) along with all materials including drilling of required size holes on rails (if required) for fixing the track devices, taking the cable lead through anti rodent , anti-oxidant and non-flammable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mushroom and terminating it on terminals including digging of trench under track up to location/track side unit. (All material required for installation of above equipment are t o be supplied by the firm.)(One set includes 05 detection point and 04track section) ] |
| 15 | Supply of MSDAC 05 DP system including Axle Detectors,Track Sideelectronics,Mushroom/ TLJB,Centeral eveluators,Reset Unit,Relay unit with Final track clearancerelay,Event logger,Diagnostic te rminal,Tool Kits,Line Verifcation box for each Track section/supervisoryTrack section including all OEM ra cks/accosseries fully wired and equippwd with 05 Detection points and04 Track sections as per RDSO S pec.No.RDSO/SPN/176/2013 (Ver.3) or latest. Inbuilt cable length of allTX/RX shall be up t0 15 meter len gth. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 16 | Installation,wiring, testing andcommissioning of Multi Section Digital Axle Counter Indoor Set comprising of processors/central evaluators for section/station/Relay Hut including its associated Ind oor Equipment and wiring of the same to integrate with existing EI/PI/Local Signaling circuits.(One MSDA C set comprises of system fully wired and equipped for 05DP and 04TS as detailed in item of supply.Inst allation and commissioning of Detection point Installation of complete assembly of Track device unit for entry or exit and track side electronic equipment(if applicable) along with all materials including drilling of required size holes on rails (if required) for fixing the track devices, taking the cable lead through anti rodent , anti-oxidant and non-flammable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mushroom and terminating it on terminals including digging of trench under track up to location/track side unit. (All material required for installation of above equipment are t o be supplied by the firm.)(One set includes 05 detection point and 04track section) ] |
| 17 | Supply of Multi Section Digital Axle Counter (MSDAC) system including Axle Detectors,Tra ck side electronics,Central Evaluator, Restaurant, Reset Unit, Relay Unit with Final track clearance relay, Line verification box for each Track section, including all OEM racks/accessories fully wired and equippe d with 10 Detection points and 08 track sections as per RDSO Specification No. RDSO/SPN/176/2013 (V er. 3) or latest. Inbuilt cable length of all TX/RX shall be up to 15 meter length. (Rate to be quoted per M SDAC set including DPs). Nos = MSDAC system Inspection- RDSO [ Warranty Period: 30 Months after t he date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 18 | Installation, wiring, testing and commissioning of multi Section Digital Axle Counter Indoo r Sets comprising of processors/central Evaluators for section/station/Relay Hut including its associated I ndoor Equipment and wiring of the same to integrate with existing EI/PI/LOCAL Signalling circuits.(One MSDAC set comprises of system fully wired and equipped for 10 DP and 08 track section as detailed in it em of Supply ) ] |
| 19 | Installation and commissioning of Detection point Installation of complete assembly of Tra ck device unit for entry or exit and track side electronic equipment (if applicable) along with Earthing (a s detailed in special conditions) with all materials including drilling of required size holes on rails( if requ ired) for fixing the track devices, taking the cable lead through anti rodent, anti-oxidant and non-flamma ble propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mu shroom and terminating it on terminals including digging of trench under track upto location/track side unit. (All material required for installation of above equipment are to be supplied by the firm.) Please ref er special conditions in Annexure-Special conditions for detailed Installation Guidelines.(Rate to be quot ed per DP). ] |
| 20 | Supply of Multi Section Digital Axle Counter (MSDAC) system including Axle Detectors, Tra ck side electronics, Central Evaluator, Reset unit, Relay Unit with Final Track clearance relay, Line verific ation box for each Track section, including all OEM racks/accessories fully wired and equipped with 10 D etection points and 08 Track sections as per RDSO Specification No.RDSO/ SPN/ 176/2013 (Ver.3) or late st. Inbuilt cable length of all TX/RX shall be up to 15 meter length. (Rate to be quoted per MSDAC set in cluding DPs). [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 21 | Installation, wiring, testing and commissioning of Multi Section Digital Axle Counter Indoor Sets comprising of processors/ central Evaluators for section/station/Relay hut including its associated I ndoor Equipment and wiring of the same to integrate with existing EI/PI/LOCAL Signalling circuits. One MSDAC sets comprise of system fully wired and equipped for 10 DP and 8 track sections as detailed in it em of supply. ] |
| 22 | Installation and commissioning of Detection point Installation of complete assembly of Tra ck device unit for entry or exit and track side electronic equipment (if applicable) along with Earthing (a s detailed in special conditions) with all materials including drilling of required size holes on rails( if requ ired) for fixing the track devices, taking the cable lead through anti rodent, anti-oxidant and non-flamma ble propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mu shroom and terminating it on terminals including digging of trench under track upto location/track side unit. (All material required for installation of above equipment are to be supplied by the firm.) Please ref er special conditions in Annexure-Special conditions for detailed Installation Guidelines.(rate to be quote d per DP) ] |
| 23 | Supply of Multi Section Digital Axle Counter (MSDAC) system including Axle Detectors,Tra ck side electronics,Central Evaluator, Restaurant, Reset Unit, Relay Unit with Final track clearance relay, Line verification box for each Track section, including all OEM racks/accessories fully wired and equippe d with 05 Detection points and 04 track sections as per RDSO Specification No. RDSO/SPN/176/2013 (V er. 3) or latest. Inbuilt cable length of all TX/RX shall be up to 15 meter length. (Rate to be quoted per M SDAC set including DPs). Nos = MSDAC system Inspection- RDSO [ Warranty Period: 30 Months after t he date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 24 | Installation, wiring, testing and commissioning of multi Section Digital Axle Counter Indoo r Sets comprising of processors/central Evaluators for section/station/Relay Hut including its associated I ndoor Equipment and wiring of the same to integrate with existing EI/PI/LOCAL Signalling circuits.(One MSDAC set comprises of system fully wired and equipped for 05 DP and 04 track sections as detailed in item of Supply ) ] |
| 25 | Installation and commissioning of Detection point Installation of complete assembly of Tra ck device unit for entry or exit and track side electronic equipment (if applicable) along with Earthing (a s detailed in special conditions) with all materials including drilling of required size holes on rails( if requ ired) for fixing the track devices, taking the cable lead through anti rodent, anti-oxidant and non-flamma ble propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mu shroom and terminating it on terminals including digging of trench under track upto location/track side unit. (All material required for installation of above equipment are to be supplied by the firm.) Please ref er special conditions in Annexure-Special conditions for detailed Installation Guidelines.(Rate to be quot ed per DP). ] |
| 26 | Supply of Multi Section Digital Axle Counter (MSDAC) system including Axle Detectors, Tra ck side electronics, Central Evaluator, reset unit, Relay Unit with Final Track clearance relay, Line verific ation box for each Track section, including all OEM racks/accessories fully wired and equipped with 12 D etection point & 10 track sections as per RDSO Specification No. RDSO/ SPN/ 176/2013 (Ver.3) or latest. Inbuilt cable length of all TX/RX shall be up to 15-meter length. (Rate to be quoted per MSDAC set inclu ding DPs) [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitte d: Max 8 lacs ] ] |
| 27 | Installation, wiring, testing and commissioning of Multi Section Digital Axle Counter Indoor Sets comprising of processors/ central Evaluators for section/station/Relay hut including its associated I ndoor Equipment and wiring of the same to integrate with existing EI/PI/LOCAL Signalling circuits. One MSDAC sets comprise of system fully wired and equipped for 12 DP and 10 track sections as detailed in item of supply. ] |
| 28 | Installation and commissioning of Detection point Installation of complete assembly of Tra ck device unit for entry or exit and track side electronic equipment (if applicable) along with Earthing (a s detailed in special conditions) with all materials including drilling of required size holes on rails (if requ ired) for fixing the track devices, taking the cable lead through anti rodent, anti-oxidant and non-flamma ble propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mu shroom and terminating it on terminals including digging of trench under track upto location/track side unit. (All material required for installation of above equipment are to be supplied by the firm.) Please ref er special conditions in Annexure- Special conditions for detailed Installation Guidelines. (rate to be quot ed per DP). ] |
