|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out PCC embedded portion and making good disturbed ground complete all as specified and directed. |
| 3 | Dismantlng structural steel work includng door, gates but excluding framed truss etc complete all as specified and directed. |
| 4 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | S&F Hand rails,half round or other section or core for wooden hand rails straight portion,drilled and countersunk for balusters running bar, for doors,balusters,nosing to steps including embeding in concrete and screwing etc,wind ties for roof including securing bolts, angle iron posts and struts in fencing includding cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets (for securing wire mesh etc) includding all necessary drilling,bolting or riveeting, etc and similar work confirming to Fe-290 Gde -165,complete all as specified and directed. |
| 6 | M & L for Plain cement concrete 1:3:6 ,type C-1 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete ,complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and directed. |
| 8 | M & L for Plain cement concrete 1:4:8 ,type D-2 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete ,complete all as specified and directed. |
| 9 | M & L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns,hookings ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, etc complete all as specified and directed. |
| 10 | M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spacers and binders complete all as specified and directed. |
| 11 | M & L for formwork to flat rough finished surface for sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed |
| 12 | M&L Reinforced cement Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs under-reamed piles and mass concrete using M2O concrete (20 mm graded stone aggregate) complete all as specified and directed |
| 13 | Supply only chain link MS galvanised fencing of mesh size 100x100 mm x 4mm dia (not less than 1.98 kg per Sqm),complete all as specified and directed. |
| 14 | Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails,straining bolts etc including provision of binding wire,complete all as specified and directed. |
| 15 | S & F in 12mm dia MS screw bolts (Machine made) with hexagonal or squre head at one end,screwed at otherend, length of bolt n.exc 5cm with one washer complete all as specified and directed. |
| 16 | S&F Galvanised ,2 strand ,steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and provision of galvanised mild steel pins,etc as directed (each line wire to be mesaured) complete all as specified and directed. |
| 17 | M&L for providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length (total length 90 mtr), having 50 Nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52mm thick) and weight 43.478 gm/ metre and fixing the same with existing Y-shaped angle iron placed 2m apart and with 6 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with G.I staple and GI clips to retain horizontal, including necessary bolts complete all as per direction of Engineer-in-Charge. Note:- Make of concertina coil shall be approved by GE. |
| 18 | M&L for rendering 10mm thick cement plasster on fair faceof brick work or concrete in cement mortar 1:4 finished even and smooth without using extra cement including mixing of wtaer proofing compound in the proportion as per manufacturers instructions complete all as specified and directed. (Note:- water proofing compound shall be measured and paid separately. |
| 19 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 20 | M & L for Applying two coats of synthetic enamel paints over one coat of red oxide primer including preparation of new steel surfaces over 10cm in width or girth,not otherwise described complete all as specified and directed. |
| 21 | M & L for Applying two coats of synthetic enamel paints over one coat of red oxide primer including preparation of new surfaces over 10cm in width or girth,not otherwise described complete all as specified and directed. |
| 22 | Material and Labour for apply two coats of 100% Premium Anti fungal weather coat acrylic emulsion paint having VOC less than 50 gm / litre and UV resistence as per IS 15489;2004, Alkali & fungal resistence, dirt resistence exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre / 10 sqm over new surfaces complete all as specified and directed. .Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. |
| 23 | Removing surplus excavated spoil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 24 | S&F PVC (SWR) pipes 100 MM bore single socketed, in any length with rubber ring joints for weep hole, complete all as specified and directed. |
| 25 | Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including wind tie. complete all as specified and directed. |
| 26 | M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 27 | M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof ridge/covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 28 | Dismantling wall & ceiling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed. |
| 29 | S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 4mm thick non asbestos fibre cement plain builiding boards fixed to aluminum snap grid and providing one coats of oil bound distemper including preparation of surfaces complete all as specified and directed. |
| 30 | M & L preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete as specified and directed |
| 31 | M & L for Wind tie, drilled and countersunk for roof including securing bolts Fe-290 Gde 165 complete all as specified and directed. |
| 32 | M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills, bed blocks etc. complete all as specified and directed. |
| 33 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. |
| 34 | M & L for rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on other fair faces of brick work / concrete surfaces finished even and fair with out extra cement with WPC complete all as specified and directed.Note:- (i) water proofing compound on only top layer of plaster (ie 5mm thick)(ii) Qty of WPC 200ml per cement Bag as per manufacturer instructions (iii) WPC shall be measured and paid separately) |
| 35 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over 1mm thick wall care putty complete all as specified and directed. |
| 36 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls over 1 mm thick wall care putty complete all as specified and directed. Please Enable Macros to View BoQ information |
