|
| 1 | 15.17 Dismantling steel workmanually/ bymechanical means in builtupsectionswithout dismembering andstackingwithin50meterslead as per direction of Engineer-in-charge. Kg 1.00 |
| 2 | 15.6 Demolishing brick workmanually/bymechanical means includingstacking of serviceablematerial and disposal of unserviceablematerial within 50meters lead as per direction of Engineer-incharge. 15.6.1 In lime mortar Cum 218.0015.6.2 In cement mortar Cum 437.00 |
| 3 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. All kinds of soil |
| 4 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 5 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. Mild steel and Medium Tensile steel bars. |
| 6 | 19.1 Centeringandshuttering includingstrutting, proppingstretchingetc.complete for and removal of formworkbysheet plateor plywoodshuttering for : 19.1.1 Foundations, footings, bases of columns, etc. For mass concrete. Sqm 160.00 |
| 7 | 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 Cement concrete grade M-20(Nominal Mix) with 20mm maximum size of stone aggregate. Cum 5435.00 |
| 8 | 7.1 Random rubble masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum |
| 9 | 4.13 Providing and laying damp-proof course 40mm thick withcement concreteM-15(NominalMix)with10/12mmmaximumsizeof stone aggregate. Sqm 240.00 |
| 10 | 6.1 Brick work withwell burnt chimney bricks in bulls patent trench kilnmanufacturedbygholprocess,crushingstrengthnot lessthan40kg/sqcmand water absorption not more than 15% in foundation and plinth.6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 5030.006.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand Cum 4824.00 |
| 11 | 13.1 12 mm cement plaster of mix :13.1.1 1:4 (1 cement: 4 sand) Sqm 149.00 |
| 12 | Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete. |
| 13 | 13.39 Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade: Two or more coats on new work Sqm 58.00 |
| 14 | 10.15 Steel work in built up M.S. tubular section (round, square orrectangularHollowtubeetc.) trusses/frameworketc./ railingworketc.includingcutting,hoistingfixinginpositionandapplyingaprimingcoatofapprovedsteelprimer,weldedandboltedincludingspecialshapedwashers etc. complete.10.15.1 Hot finished welded type tubes. Kg. 99.00 |
| 15 | 10.2 Structural steel work riveted, bolted or welded in built upsections, trussesandframedwork, including cutting, hoisting, fixinginpositionandapplyingaprimingcoat of approvedsteel primer allcomplete: Kg. 69.00 |
| 16 | 12.1 Providing&fixingcorrugatedGalvanisedsteel (CGS)sheet roofingincludingvertical/curvedsurface fixedwithpolymer coatedJor Lhooks, boltsandnuts8mmdiameterwithbitumenandG.I. limpetwashers or withG.I. limpet washers filledwithwhite lead andincludingacoatofapprovedsteelprimerandtwocoatsofapprovedpaint on overlapping of sheets complete (up to any pitch inorizontal/vertical or curvedsurfaces)excluding thecost of purlins,rafters and trusses and including cutting to size and shapewherever required.12.1.1 1.00mm thick with zinc coating not less than 275gm/m² Sqm 871.00 |
| 17 | 13.46.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture Please Enable Macros to View BoQ information |
