|
| 1 | Erection of steel tubular or rail pole strut in cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) foundation including excavation and refillingand secured with holding clamps, bolts, nuts, etc. as required |
| 2 | Erection of all Aluminium conductor of 7/1.96mm to 7/3.1mm diameter including binding etc as required. |
| 3 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, olts, nuts, washers etc |
| 4 | Supplying and erection of 11 KV pin insulator complete withlarge steel head G.I. pin, nuts, washers etc. as required |
| 5 | Supplying and erection of galvanised stay set for 11 KV overhead lines complete with 19/ 20 mm dia X 1.8 metres long stayrod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble,stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm diaG.I. stay wire and 11 KV strain insulator etc in cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) foundation including excavation and refillingetc. as required. |
| 6 | Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required |
| 7 | Erection of G.I. Wire No. 8 SWG including binding etc. as required |
| 8 | Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required. |
| 9 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 10 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 11 | Providing and fixing H.T. danger notice plate of 250 mm X 200mm, made of mild steel, at least 2 mm thick, and vitreousenameled white on both sides, and with inscription in single redcolour on front side as required. |
| 12 | Supply of 8 SWG GI wire. (Note- Rate taken as per 6 swg GI wire from CPWD 2022 for per Kg ) |
| 13 | Making of two lengths of channel iron 100 mm X 50 mm X 6 mm(9.5 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required |
| 14 | Fabrication of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washers etc and painting with primer and finish paint as required . |
| 15 | Erection & making of a set of cradle guard bracket fram for 11 kv over head line having 2 nos fabricated out of 65 mmx 65mmx6mm angle iron to make a cradle guard.erection & making of a set of cradle guard bracket fram for 6.6 kv over head line having 2 nos febricated out of 65 mmx 65mmx6mm angle iron to make a cradle guard. |
| 16 | Fixing GOAB & Horn Gap fuse switch unit |
| 17 | Painting of pole |
| 18 | Providing GOAB Switch, 11KV, 800A |
| 19 | Providing Horn Gap Fuse Unit, 200A, 11KV |
| 20 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 21 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required. |
| 22 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
