Supply Of Tungsten Carbide T Ing Tool Set , Tungsten Carbide Tamping Tool Set For Unimat 3S Machine Confirming To Rdso Specification No. Tm/Hm/6/320 ( Rev-3 ) July 2019 And One Set Consists Of 1. Drawing No Rdso/Tm/01A/16 Plasser Part No. W37.1320 =08 Nos, Jabalpur -> Madhya Pradesh-Madhya Pradesh
TDR : 54414862
Tender Notice
BOQ
9 Days Left
Jabalpur -> Madhya Pradesh
Madhya Pradesh
Supply Of Tungsten Carbide T Ing Tool Set , Tungsten Carbide Tamping Tool Set For Unimat 3S Machine Confirming To Rdso Specification No. Tm/Hm/6/320 ( Rev-3 ) July 2019 And One Set Consists Of 1. Drawing No Rdso/Tm/01A/16 Plasser Part No. W37.1320 =08 Nos
Tungsten carbide Tamping Tool set for UNIMAT 3S machine confirming to RDSO specification No. TM/HM/6/320 ( Rev-3 ) July 2019 and one set consists of 1. Drawing No RDSO/TM/01A/16 PLASSER Part No. W37.1320 =08 NOS. 2. Drawing No. RDSO/TM/01C/16 PLASSER Part No. 2W31.41B =08 NOS. Make-Plas ser or Equivalent and composition of Material required as per RDSO specification No.TM/HM/6/320 (Rev-3) [ Warranty Period: 24 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
2
Tungsten Carbide Tip Tamping Tools for CSM/DUOMATIC (New type tool) tamping machines c onforming to RDSO specification No.TM/HM/6/320 Rev-03 2019 Drawing No. RDSO/TM/15A/16, RDSO/TM/15 B/16, RDSO/TM/15C/16, RDSO/TM/15D/16. Each set of tamping tools consist Plasser part no.CU30.10840-FR -I Qty 08 nos., Plasser part no.CU30.10840-FR-II Qty 08 nos., Plasser part no.CU30.10840-FR-III Qty 08 nos., Plasser part no.CU30.10840-FR-IV Qty 08 nos. Make-Plasser or Equivalent and composition of Material requi red as per RDSO specification No.TM/HM/6/320 (Rev-3) [ Warranty Period: 24 Months after the date of del ivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
3
TUNGSTEN CARBIDE TAMPING TOOL (TCTT) FOR MFI MACHINES REQUIRED AS PER PLASSER P ART NO.: CU30.10840.FRI (8 no. each set) , AS PER PLASSER PART NO.: CU30.6840.FRI (4 No. each set) , A S PER PLASSER PART NO.: CU30.2743 FRI (4 No. each set). Make - Plasser or Equivalent and composition of Material required as per RDSO specification No.TM/HM/6/320 (Rev-3) [ Warranty Period: 24 Months after t he date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
4
Tungsten Carbide Tamping Tool for Tamping Express and for Dynamic Tamping Express as p er RDSO ; RDSO/TM /15A/16 (32 no./SET) AND RDSO/TM/15E/16 (16 no./SET) as per RDSO specification. Ma ke-Plasser or Equivalent and composition of Material required as per RDSO specification No.TM/HM/6/320 (R ev-3). [ Warranty Period: 24 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
5
TAMPING TOOLS (TCTT) FOR PCTM- ONE SET CONSISTING 16 TOOLS (8+8) . AS PER DRAWIN G ATTACHED IN DOCUMENT SECTION. Make-Plasser or Equivalent and composition of Material required as p er RDSO specification No.TM/HM/6/320 (Rev-3) [ Warranty Period: 24 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
6
TUNGSTEN CARBIDE TAMPING TOOL (TCTT) SET FOR UNIMAT-4S AS PER SPECIFICATION NO. TM/HM/6/320 (REV-3) & DRAWING NO. -1. RDSO/TM/01A/16=08 NOS. IN A SET 2. RDSO/TM/01B/16=08 NOS . IN A SET(TOTAL NO. OF TOOL IN A SET IS 16 NOS.) Make-Plasser or Equivalent and composition of Material required as per RDSO specification No.TM/HM/6/320 (Rev-3) [ Warranty Period: 24 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
